diff --git a/libjpegtwrp/jdhuff.c b/libjpegtwrp/jdhuff.c
new file mode 100644
index 0000000..bc5d4fd
--- /dev/null
+++ b/libjpegtwrp/jdhuff.c
@@ -0,0 +1,894 @@
+/*
+ * jdhuff.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains Huffman entropy decoding routines.
+ *
+ * Much of the complexity here has to do with supporting input suspension.
+ * If the data source module demands suspension, we want to be able to back
+ * up to the start of the current MCU.  To do this, we copy state variables
+ * into local working storage, and update them back to the permanent
+ * storage only upon successful completion of an MCU.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jdhuff.h"		/* Declarations shared with jdphuff.c */
+
+LOCAL(boolean) process_restart (j_decompress_ptr cinfo);
+
+
+/*
+ * Expanded entropy decoder object for Huffman decoding.
+ *
+ * The savable_state subrecord contains fields that change within an MCU,
+ * but must not be updated permanently until we complete the MCU.
+ */
+
+typedef struct {
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+} savable_state;
+
+/* This macro is to work around compilers with missing or broken
+ * structure assignment.  You'll need to fix this code if you have
+ * such a compiler and you change MAX_COMPS_IN_SCAN.
+ */
+
+#ifndef NO_STRUCT_ASSIGN
+#define ASSIGN_STATE(dest,src)  ((dest) = (src))
+#else
+#if MAX_COMPS_IN_SCAN == 4
+#define ASSIGN_STATE(dest,src)  \
+	((dest).last_dc_val[0] = (src).last_dc_val[0], \
+	 (dest).last_dc_val[1] = (src).last_dc_val[1], \
+	 (dest).last_dc_val[2] = (src).last_dc_val[2], \
+	 (dest).last_dc_val[3] = (src).last_dc_val[3])
+#endif
+#endif
+
+
+typedef struct {
+  struct jpeg_entropy_decoder pub; /* public fields */
+
+  /* These fields are loaded into local variables at start of each MCU.
+   * In case of suspension, we exit WITHOUT updating them.
+   */
+  bitread_perm_state bitstate;	/* Bit buffer at start of MCU */
+  savable_state saved;		/* Other state at start of MCU */
+
+  /* These fields are NOT loaded into local working state. */
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+
+  /* Pointers to derived tables (these workspaces have image lifespan) */
+  d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
+  d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];
+
+  /* Precalculated info set up by start_pass for use in decode_mcu: */
+
+  /* Pointers to derived tables to be used for each block within an MCU */
+  d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  /* Whether we care about the DC and AC coefficient values for each block */
+  boolean dc_needed[D_MAX_BLOCKS_IN_MCU];
+  boolean ac_needed[D_MAX_BLOCKS_IN_MCU];
+} huff_entropy_decoder;
+
+typedef huff_entropy_decoder * huff_entropy_ptr;
+
+/*
+ * Initialize for a Huffman-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass_huff_decoder (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci, blkn, dctbl, actbl;
+  jpeg_component_info * compptr;
+
+  /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
+   * This ought to be an error condition, but we make it a warning because
+   * there are some baseline files out there with all zeroes in these bytes.
+   */
+  if (cinfo->Ss != 0 || cinfo->Se != DCTSIZE2-1 ||
+      cinfo->Ah != 0 || cinfo->Al != 0)
+    WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);
+
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    dctbl = compptr->dc_tbl_no;
+    actbl = compptr->ac_tbl_no;
+    /* Compute derived values for Huffman tables */
+    /* We may do this more than once for a table, but it's not expensive */
+    jpeg_make_d_derived_tbl(cinfo, TRUE, dctbl,
+			    & entropy->dc_derived_tbls[dctbl]);
+    jpeg_make_d_derived_tbl(cinfo, FALSE, actbl,
+			    & entropy->ac_derived_tbls[actbl]);
+    /* Initialize DC predictions to 0 */
+    entropy->saved.last_dc_val[ci] = 0;
+  }
+
+  /* Precalculate decoding info for each block in an MCU of this scan */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+    /* Precalculate which table to use for each block */
+    entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no];
+    entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no];
+    /* Decide whether we really care about the coefficient values */
+    if (compptr->component_needed) {
+      entropy->dc_needed[blkn] = TRUE;
+      /* we don't need the ACs if producing a 1/8th-size image */
+      entropy->ac_needed[blkn] = (compptr->DCT_scaled_size > 1);
+    } else {
+      entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE;
+    }
+  }
+
+  /* Initialize bitread state variables */
+  entropy->bitstate.bits_left = 0;
+  entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
+  entropy->pub.insufficient_data = FALSE;
+
+  /* Initialize restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ *
+ * Note this is also used by jdphuff.c.
+ */
+
+GLOBAL(void)
+jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno,
+			 d_derived_tbl ** pdtbl)
+{
+  JHUFF_TBL *htbl;
+  d_derived_tbl *dtbl;
+  int p, i, l, si, numsymbols;
+  int lookbits, ctr;
+  char huffsize[257];
+  unsigned int huffcode[257];
+  unsigned int code;
+
+  /* Note that huffsize[] and huffcode[] are filled in code-length order,
+   * paralleling the order of the symbols themselves in htbl->huffval[].
+   */
+
+  /* Find the input Huffman table */
+  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+  htbl =
+    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
+  /* Allocate a workspace if we haven't already done so. */
+  if (*pdtbl == NULL)
+    *pdtbl = (d_derived_tbl *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(d_derived_tbl));
+  dtbl = *pdtbl;
+  dtbl->pub = htbl;		/* fill in back link */
+  
+  /* Figure C.1: make table of Huffman code length for each symbol */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    i = (int) htbl->bits[l];
+    if (i < 0 || p + i > 256)	/* protect against table overrun */
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    while (i--)
+      huffsize[p++] = (char) l;
+  }
+  huffsize[p] = 0;
+  numsymbols = p;
+  
+  /* Figure C.2: generate the codes themselves */
+  /* We also validate that the counts represent a legal Huffman code tree. */
+  
+  code = 0;
+  si = huffsize[0];
+  p = 0;
+  while (huffsize[p]) {
+    while (((int) huffsize[p]) == si) {
+      huffcode[p++] = code;
+      code++;
+    }
+    /* code is now 1 more than the last code used for codelength si; but
+     * it must still fit in si bits, since no code is allowed to be all ones.
+     */
+    if (((INT32) code) >= (((INT32) 1) << si))
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    code <<= 1;
+    si++;
+  }
+
+  /* Figure F.15: generate decoding tables for bit-sequential decoding */
+
+  p = 0;
+  for (l = 1; l <= 16; l++) {
+    if (htbl->bits[l]) {
+      /* valoffset[l] = huffval[] index of 1st symbol of code length l,
+       * minus the minimum code of length l
+       */
+      dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p];
+      p += htbl->bits[l];
+      dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */
+    } else {
+      dtbl->maxcode[l] = -1;	/* -1 if no codes of this length */
+    }
+  }
+  dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */
+
+  /* Compute lookahead tables to speed up decoding.
+   * First we set all the table entries to 0, indicating "too long";
+   * then we iterate through the Huffman codes that are short enough and
+   * fill in all the entries that correspond to bit sequences starting
+   * with that code.
+   */
+
+  MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits));
+
+  p = 0;
+  for (l = 1; l <= HUFF_LOOKAHEAD; l++) {
+    for (i = 1; i <= (int) htbl->bits[l]; i++, p++) {
+      /* l = current code's length, p = its index in huffcode[] & huffval[]. */
+      /* Generate left-justified code followed by all possible bit sequences */
+      lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l);
+      for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) {
+	dtbl->look_nbits[lookbits] = l;
+	dtbl->look_sym[lookbits] = htbl->huffval[p];
+	lookbits++;
+      }
+    }
+  }
+
+  /* Validate symbols as being reasonable.
+   * For AC tables, we make no check, but accept all byte values 0..255.
+   * For DC tables, we require the symbols to be in range 0..15.
+   * (Tighter bounds could be applied depending on the data depth and mode,
+   * but this is sufficient to ensure safe decoding.)
+   */
+  if (isDC) {
+    for (i = 0; i < numsymbols; i++) {
+      int sym = htbl->huffval[i];
+      if (sym < 0 || sym > 15)
+	ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    }
+  }
+}
+
+
+/*
+ * Out-of-line code for bit fetching (shared with jdphuff.c).
+ * See jdhuff.h for info about usage.
+ * Note: current values of get_buffer and bits_left are passed as parameters,
+ * but are returned in the corresponding fields of the state struct.
+ *
+ * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width
+ * of get_buffer to be used.  (On machines with wider words, an even larger
+ * buffer could be used.)  However, on some machines 32-bit shifts are
+ * quite slow and take time proportional to the number of places shifted.
+ * (This is true with most PC compilers, for instance.)  In this case it may
+ * be a win to set MIN_GET_BITS to the minimum value of 15.  This reduces the
+ * average shift distance at the cost of more calls to jpeg_fill_bit_buffer.
+ */
+
+#ifdef SLOW_SHIFT_32
+#define MIN_GET_BITS  15	/* minimum allowable value */
+#else
+#define MIN_GET_BITS  (BIT_BUF_SIZE-7)
+#endif
+
+
+GLOBAL(boolean)
+jpeg_fill_bit_buffer (bitread_working_state * state,
+		      register bit_buf_type get_buffer, register int bits_left,
+		      int nbits)
+/* Load up the bit buffer to a depth of at least nbits */
+{
+  /* Copy heavily used state fields into locals (hopefully registers) */
+  register const JOCTET * next_input_byte = state->next_input_byte;
+  register size_t bytes_in_buffer = state->bytes_in_buffer;
+  j_decompress_ptr cinfo = state->cinfo;
+
+  /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */
+  /* (It is assumed that no request will be for more than that many bits.) */
+  /* We fail to do so only if we hit a marker or are forced to suspend. */
+
+  if (cinfo->unread_marker == 0) {	/* cannot advance past a marker */
+    while (bits_left < MIN_GET_BITS) {
+      register int c;
+
+      /* Attempt to read a byte */
+      if (bytes_in_buffer == 0) {
+	if (! (*cinfo->src->fill_input_buffer) (cinfo))
+	  return FALSE;
+	next_input_byte = cinfo->src->next_input_byte;
+	bytes_in_buffer = cinfo->src->bytes_in_buffer;
+      }
+      bytes_in_buffer--;
+      c = GETJOCTET(*next_input_byte++);
+
+      /* If it's 0xFF, check and discard stuffed zero byte */
+      if (c == 0xFF) {
+	/* Loop here to discard any padding FF's on terminating marker,
+	 * so that we can save a valid unread_marker value.  NOTE: we will
+	 * accept multiple FF's followed by a 0 as meaning a single FF data
+	 * byte.  This data pattern is not valid according to the standard.
+	 */
+	do {
+	  if (bytes_in_buffer == 0) {
+	    if (! (*cinfo->src->fill_input_buffer) (cinfo))
+	      return FALSE;
+	    next_input_byte = cinfo->src->next_input_byte;
+	    bytes_in_buffer = cinfo->src->bytes_in_buffer;
+	  }
+	  bytes_in_buffer--;
+	  c = GETJOCTET(*next_input_byte++);
+	} while (c == 0xFF);
+
+	if (c == 0) {
+	  /* Found FF/00, which represents an FF data byte */
+	  c = 0xFF;
+	} else {
+	  /* Oops, it's actually a marker indicating end of compressed data.
+	   * Save the marker code for later use.
+	   * Fine point: it might appear that we should save the marker into
+	   * bitread working state, not straight into permanent state.  But
+	   * once we have hit a marker, we cannot need to suspend within the
+	   * current MCU, because we will read no more bytes from the data
+	   * source.  So it is OK to update permanent state right away.
+	   */
+	  cinfo->unread_marker = c;
+	  /* See if we need to insert some fake zero bits. */
+	  goto no_more_bytes;
+	}
+      }
+
+      /* OK, load c into get_buffer */
+      get_buffer = (get_buffer << 8) | c;
+      bits_left += 8;
+    } /* end while */
+  } else {
+  no_more_bytes:
+    /* We get here if we've read the marker that terminates the compressed
+     * data segment.  There should be enough bits in the buffer register
+     * to satisfy the request; if so, no problem.
+     */
+    if (nbits > bits_left) {
+      /* Uh-oh.  Report corrupted data to user and stuff zeroes into
+       * the data stream, so that we can produce some kind of image.
+       * We use a nonvolatile flag to ensure that only one warning message
+       * appears per data segment.
+       */
+      if (! cinfo->entropy->insufficient_data) {
+	WARNMS(cinfo, JWRN_HIT_MARKER);
+	cinfo->entropy->insufficient_data = TRUE;
+      }
+      /* Fill the buffer with zero bits */
+      get_buffer <<= MIN_GET_BITS - bits_left;
+      bits_left = MIN_GET_BITS;
+    }
+  }
+
+  /* Unload the local registers */
+  state->next_input_byte = next_input_byte;
+  state->bytes_in_buffer = bytes_in_buffer;
+  state->get_buffer = get_buffer;
+  state->bits_left = bits_left;
+
+  return TRUE;
+}
+
+
+/*
+ * Out-of-line code for Huffman code decoding.
+ * See jdhuff.h for info about usage.
+ */
+
+GLOBAL(int)
+jpeg_huff_decode (bitread_working_state * state,
+		  register bit_buf_type get_buffer, register int bits_left,
+		  d_derived_tbl * htbl, int min_bits)
+{
+  register int l = min_bits;
+  register INT32 code;
+
+  /* HUFF_DECODE has determined that the code is at least min_bits */
+  /* bits long, so fetch that many bits in one swoop. */
+
+  CHECK_BIT_BUFFER(*state, l, return -1);
+  code = GET_BITS(l);
+
+  /* Collect the rest of the Huffman code one bit at a time. */
+  /* This is per Figure F.16 in the JPEG spec. */
+
+  while (code > htbl->maxcode[l]) {
+    code <<= 1;
+    CHECK_BIT_BUFFER(*state, 1, return -1);
+    code |= GET_BITS(1);
+    l++;
+  }
+
+  /* Unload the local registers */
+  state->get_buffer = get_buffer;
+  state->bits_left = bits_left;
+
+  /* With garbage input we may reach the sentinel value l = 17. */
+
+  if (l > 16) {
+    WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE);
+    return 0;			/* fake a zero as the safest result */
+  }
+
+  return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ];
+}
+
+
+/*
+ * Figure F.12: extend sign bit.
+ * On some machines, a shift and add will be faster than a table lookup.
+ */
+
+#ifdef AVOID_TABLES
+
+#define HUFF_EXTEND(x,s)  ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))
+
+#else
+
+#define HUFF_EXTEND(x,s)  ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))
+
+static const int extend_test[16] =   /* entry n is 2**(n-1) */
+  { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
+    0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 };
+
+static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */
+  { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1,
+    ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1,
+    ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1,
+    ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 };
+
+#endif /* AVOID_TABLES */
+
+
+/*
+ * Check for a restart marker & resynchronize decoder.
+ * Returns FALSE if must suspend.
+ */
+
+LOCAL(boolean)
+process_restart (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int ci;
+
+  /* Throw away any unused bits remaining in bit buffer; */
+  /* include any full bytes in next_marker's count of discarded bytes */
+  cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
+  entropy->bitstate.bits_left = 0;
+
+  /* Advance past the RSTn marker */
+  if (! (*cinfo->marker->read_restart_marker) (cinfo))
+    return FALSE;
+
+  /* Re-initialize DC predictions to 0 */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++)
+    entropy->saved.last_dc_val[ci] = 0;
+
+  /* Reset restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+
+  /* Reset out-of-data flag, unless read_restart_marker left us smack up
+   * against a marker.  In that case we will end up treating the next data
+   * segment as empty, and we can avoid producing bogus output pixels by
+   * leaving the flag set.
+   */
+  if (cinfo->unread_marker == 0)
+    entropy->pub.insufficient_data = FALSE;
+
+  return TRUE;
+}
+
+/*
+ * Save the current Huffman deocde position and the DC coefficients
+ * for each component into bitstream_offset and dc_info[], respectively.
+ */
+METHODDEF(void)
+get_huffman_decoder_configuration(j_decompress_ptr cinfo,
+        huffman_offset_data *offset)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  short int *dc_info = offset->prev_dc;
+  int i;
+  jpeg_get_huffman_decoder_configuration(cinfo, offset);
+  for (i = 0; i < cinfo->comps_in_scan; i++) {
+    dc_info[i] = entropy->saved.last_dc_val[i];
+  }
+}
+
+/*
+ * Save the current Huffman decoder position and the bit buffer
+ * into bitstream_offset and get_buffer, respectively.
+ */
+GLOBAL(void)
+jpeg_get_huffman_decoder_configuration(j_decompress_ptr cinfo,
+        huffman_offset_data *offset)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+
+  if (cinfo->restart_interval) {
+    // We are at the end of a data segment
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return;
+  }
+
+  // Save restarts_to_go and next_restart_num
+  offset->restarts_to_go = (unsigned short) entropy->restarts_to_go;
+  offset->next_restart_num = cinfo->marker->next_restart_num;
+
+  offset->bitstream_offset =
+      (jget_input_stream_position(cinfo) << LOG_TWO_BIT_BUF_SIZE)
+      + entropy->bitstate.bits_left;
+
+  offset->get_buffer = entropy->bitstate.get_buffer;
+}
+
+/*
+ * Configure the Huffman decoder to decode the image
+ * starting from the bitstream position recorded in offset.
+ */
+METHODDEF(void)
+configure_huffman_decoder(j_decompress_ptr cinfo, huffman_offset_data offset)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  short int *dc_info = offset.prev_dc;
+  int i;
+  jpeg_configure_huffman_decoder(cinfo, offset);
+  for (i = 0; i < cinfo->comps_in_scan; i++) {
+    entropy->saved.last_dc_val[i] = dc_info[i];
+  }
+}
+
+/*
+ * Configure the Huffman decoder reader position and bit buffer.
+ */
+GLOBAL(void)
+jpeg_configure_huffman_decoder(j_decompress_ptr cinfo,
+        huffman_offset_data offset)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+
+  // Restore restarts_to_go and next_restart_num
+  cinfo->unread_marker = 0;
+  entropy->restarts_to_go = offset.restarts_to_go;
+  cinfo->marker->next_restart_num = offset.next_restart_num;
+
+  unsigned int bitstream_offset = offset.bitstream_offset;
+  int blkn, i;
+
+  unsigned int byte_offset = bitstream_offset >> LOG_TWO_BIT_BUF_SIZE;
+  unsigned int bit_in_bit_buffer =
+      bitstream_offset & ((1 << LOG_TWO_BIT_BUF_SIZE) - 1);
+
+  jset_input_stream_position_bit(cinfo, byte_offset,
+          bit_in_bit_buffer, offset.get_buffer);
+}
+
+/*
+ * Decode and return one MCU's worth of Huffman-compressed coefficients.
+ * The coefficients are reordered from zigzag order into natural array order,
+ * but are not dequantized.
+ *
+ * The i'th block of the MCU is stored into the block pointed to by
+ * MCU_data[i].  WE ASSUME THIS AREA HAS BEEN ZEROED BY THE CALLER.
+ * (Wholesale zeroing is usually a little faster than retail...)
+ *
+ * Returns FALSE if data source requested suspension.  In that case no
+ * changes have been made to permanent state.  (Exception: some output
+ * coefficients may already have been assigned.  This is harmless for
+ * this module, since we'll just re-assign them on the next call.)
+ */
+
+METHODDEF(boolean)
+decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int blkn;
+  BITREAD_STATE_VARS;
+  savable_state state;
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return FALSE;
+  }
+
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
+   */
+  if (! entropy->pub.insufficient_data) {
+    /* Load up working state */
+    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(state, entropy->saved);
+
+    /* Outer loop handles each block in the MCU */
+
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      JBLOCKROW block = MCU_data[blkn];
+      d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn];
+      d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn];
+      register int s, k, r;
+
+      /* Decode a single block's worth of coefficients */
+
+      /* Section F.2.2.1: decode the DC coefficient difference */
+      HUFF_DECODE(s, br_state, dctbl, return FALSE, label1);
+      if (s) {
+	CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	r = GET_BITS(s);
+	s = HUFF_EXTEND(r, s);
+      }
+
+      if (entropy->dc_needed[blkn]) {
+	/* Convert DC difference to actual value, update last_dc_val */
+	int ci = cinfo->MCU_membership[blkn];
+	s += state.last_dc_val[ci];
+	state.last_dc_val[ci] = s;
+	/* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */
+	(*block)[0] = (JCOEF) s;
+      }
+
+      if (entropy->ac_needed[blkn]) {
+
+	/* Section F.2.2.2: decode the AC coefficients */
+	/* Since zeroes are skipped, output area must be cleared beforehand */
+	for (k = 1; k < DCTSIZE2; k++) {
+	  HUFF_DECODE(s, br_state, actbl, return FALSE, label2);
+      
+	  r = s >> 4;
+	  s &= 15;
+      
+	  if (s) {
+	    k += r;
+	    CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	    r = GET_BITS(s);
+	    s = HUFF_EXTEND(r, s);
+	    /* Output coefficient in natural (dezigzagged) order.
+	     * Note: the extra entries in jpeg_natural_order[] will save us
+	     * if k >= DCTSIZE2, which could happen if the data is corrupted.
+	     */
+	    (*block)[jpeg_natural_order[k]] = (JCOEF) s;
+	  } else {
+	    if (r != 15)
+	      break;
+	    k += 15;
+	  }
+	}
+
+      } else {
+
+	/* Section F.2.2.2: decode the AC coefficients */
+	/* In this path we just discard the values */
+	for (k = 1; k < DCTSIZE2; k++) {
+	  HUFF_DECODE(s, br_state, actbl, return FALSE, label3);
+      
+	  r = s >> 4;
+	  s &= 15;
+      
+	  if (s) {
+	    k += r;
+	    CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	    DROP_BITS(s);
+	  } else {
+	    if (r != 15)
+	      break;
+	    k += 15;
+	  }
+	}
+
+      }
+    }
+
+    /* Completed MCU, so update state */
+    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(entropy->saved, state);
+  }
+
+  /* Account for restart interval (no-op if not using restarts) */
+  entropy->restarts_to_go--;
+
+  return TRUE;
+}
+
+/*
+ * Decode one MCU's worth of Huffman-compressed coefficients.
+ * The propose of this method is to calculate the
+ * data length of one MCU in Huffman-coded format.
+ * Therefore, all coefficients are discarded.
+ */
+
+METHODDEF(boolean)
+decode_mcu_discard_coef (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int blkn;
+  BITREAD_STATE_VARS;
+  savable_state state;
+
+  /* Process restart marker if needed; may have to suspend */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      if (! process_restart(cinfo))
+	return FALSE;
+  }
+
+  if (! entropy->pub.insufficient_data) {
+
+    /* Load up working state */
+    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(state, entropy->saved);
+
+    /* Outer loop handles each block in the MCU */
+
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn];
+      d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn];
+      register int s, k, r;
+
+      /* Decode a single block's worth of coefficients */
+
+      /* Section F.2.2.1: decode the DC coefficient difference */
+      HUFF_DECODE(s, br_state, dctbl, return FALSE, label1);
+      if (s) {
+	CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	r = GET_BITS(s);
+	s = HUFF_EXTEND(r, s);
+      }
+
+      /* discard all coefficients */
+      if (entropy->dc_needed[blkn]) {
+	/* Convert DC difference to actual value, update last_dc_val */
+	int ci = cinfo->MCU_membership[blkn];
+	s += state.last_dc_val[ci];
+	state.last_dc_val[ci] = s;
+      }
+      for (k = 1; k < DCTSIZE2; k++) {
+        HUFF_DECODE(s, br_state, actbl, return FALSE, label3);
+
+        r = s >> 4;
+        s &= 15;
+
+        if (s) {
+          k += r;
+          CHECK_BIT_BUFFER(br_state, s, return FALSE);
+          DROP_BITS(s);
+        } else {
+          if (r != 15)
+            break;
+          k += 15;
+        }
+      }
+    }
+
+    /* Completed MCU, so update state */
+    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(entropy->saved, state);
+  }
+
+  /* Account for restart interval (no-op if not using restarts) */
+  entropy->restarts_to_go--;
+
+  return TRUE;
+}
+
+
+/*
+ * Module initialization routine for Huffman entropy decoding.
+ */
+
+GLOBAL(void)
+jinit_huff_decoder (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy;
+  int i;
+
+  entropy = (huff_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(huff_entropy_decoder));
+  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
+  entropy->pub.start_pass = start_pass_huff_decoder;
+  entropy->pub.decode_mcu = decode_mcu;
+  entropy->pub.decode_mcu_discard_coef = decode_mcu_discard_coef;
+  entropy->pub.configure_huffman_decoder = configure_huffman_decoder;
+  entropy->pub.get_huffman_decoder_configuration =
+        get_huffman_decoder_configuration;
+  entropy->pub.index = NULL;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_HUFF_TBLS; i++) {
+    entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
+  }
+}
+
+/*
+ * Call after jpeg_read_header
+ */
+GLOBAL(void)
+jpeg_create_huffman_index(j_decompress_ptr cinfo, huffman_index *index)
+{
+  int i, s;
+  index->scan_count = 1;
+  index->total_iMCU_rows = cinfo->total_iMCU_rows;
+  index->scan = (huffman_scan_header*)malloc(index->scan_count
+          * sizeof(huffman_scan_header));
+  index->scan[0].offset = (huffman_offset_data**)malloc(cinfo->total_iMCU_rows
+          * sizeof(huffman_offset_data*));
+  index->scan[0].prev_MCU_offset.bitstream_offset = 0;
+  index->MCU_sample_size = DEFAULT_MCU_SAMPLE_SIZE;
+
+  index->mem_used = sizeof(huffman_scan_header)
+      + cinfo->total_iMCU_rows * sizeof(huffman_offset_data*);
+}
+
+GLOBAL(void)
+jpeg_destroy_huffman_index(huffman_index *index)
+{
+    int i, j;
+    for (i = 0; i < index->scan_count; i++) {
+        for(j = 0; j < index->total_iMCU_rows; j++) {
+            free(index->scan[i].offset[j]);
+        }
+        free(index->scan[i].offset);
+    }
+    free(index->scan);
+}
+
+/*
+ * Set the reader byte position to offset
+ */
+GLOBAL(void)
+jset_input_stream_position(j_decompress_ptr cinfo, int offset)
+{
+  if (cinfo->src->seek_input_data) {
+    cinfo->src->seek_input_data(cinfo, offset);
+  } else {
+    cinfo->src->bytes_in_buffer = cinfo->src->current_offset - offset;
+    cinfo->src->next_input_byte = cinfo->src->start_input_byte + offset;
+  }
+}
+
+/*
+ * Set the reader byte position to offset and bit position to bit_left
+ * with bit buffer set to buf.
+ */
+GLOBAL(void)
+jset_input_stream_position_bit(j_decompress_ptr cinfo,
+        int byte_offset, int bit_left, INT32 buf)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+
+  entropy->bitstate.bits_left = bit_left;
+  entropy->bitstate.get_buffer = buf;
+
+  jset_input_stream_position(cinfo, byte_offset);
+}
+
+/*
+ * Get the current reader byte position.
+ */
+GLOBAL(int)
+jget_input_stream_position(j_decompress_ptr cinfo)
+{
+  return cinfo->src->current_offset - cinfo->src->bytes_in_buffer;
+}