diff --git a/fuse/include/Makefile b/fuse/include/Makefile
new file mode 100644
index 0000000..43fd00a
--- /dev/null
+++ b/fuse/include/Makefile
@@ -0,0 +1,515 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# include/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+pkgdatadir = $(datadir)/fuse
+pkgincludedir = $(includedir)/fuse
+pkglibdir = $(libdir)/fuse
+pkglibexecdir = $(libexecdir)/fuse
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = i686-pc-linux-gnu
+host_triplet = i686-pc-linux-gnu
+target_triplet = i686-pc-linux-gnu
+subdir = include
+DIST_COMMON = $(fuseinclude_HEADERS) $(include_HEADERS) \
+	$(noinst_HEADERS) $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/config.h.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(fuseincludedir)" \
+	"$(DESTDIR)$(includedir)"
+HEADERS = $(fuseinclude_HEADERS) $(include_HEADERS) $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /root/fuse-2.8.5/missing --run aclocal-1.11
+AMTAR = ${SHELL} /root/fuse-2.8.5/missing --run tar
+AR = ar
+AUTOCONF = ${SHELL} /root/fuse-2.8.5/missing --run autoconf
+AUTOHEADER = ${SHELL} /root/fuse-2.8.5/missing --run autoheader
+AUTOMAKE = ${SHELL} /root/fuse-2.8.5/missing --run automake-1.11
+AWK = mawk
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -Wall -W -Wno-sign-compare -Wstrict-prototypes -Wmissing-declarations -Wwrite-strings -g -O2 -fno-strict-aliasing
+CPP = gcc -E
+CPPFLAGS = 
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GREP = /bin/grep
+INIT_D_PATH = /etc/init.d
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+LD = /usr/bin/ld
+LDFLAGS = 
+LIBICONV = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = 
+LTLIBOBJS = 
+MAKEINFO = ${SHELL} /root/fuse-2.8.5/missing --run makeinfo
+MKDIR_P = /bin/mkdir -p
+MOUNT_FUSE_PATH = /sbin
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = fuse
+PACKAGE_BUGREPORT = 
+PACKAGE_NAME = fuse
+PACKAGE_STRING = fuse 2.8.5
+PACKAGE_TARNAME = fuse
+PACKAGE_VERSION = 2.8.5
+PATH_SEPARATOR = :
+RANLIB = ranlib
+SED = /bin/sed
+SET_MAKE = 
+SHELL = /bin/bash
+STRIP = strip
+UDEV_RULES_PATH = /etc/udev/rules.d
+VERSION = 2.8.5
+abs_builddir = /root/fuse-2.8.5/include
+abs_srcdir = /root/fuse-2.8.5/include
+abs_top_builddir = /root/fuse-2.8.5
+abs_top_srcdir = /root/fuse-2.8.5
+ac_ct_CC = gcc
+ac_ct_DUMPBIN = 
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build = i686-pc-linux-gnu
+build_alias = 
+build_cpu = i686
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = i686-pc-linux-gnu
+host_alias = 
+host_cpu = i686
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /root/fuse-2.8.5/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+libfuse_libs = -pthread -lrt -ldl  
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+lt_ECHO = echo
+mandir = ${datarootdir}/man
+mkdir_p = /bin/mkdir -p
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfigdir = ${libdir}/pkgconfig
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+subdirs2 = include lib util example
+sysconfdir = ${prefix}/etc
+target = i686-pc-linux-gnu
+target_alias = 
+target_cpu = i686
+target_os = linux-gnu
+target_vendor = pc
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+fuseincludedir = $(includedir)/fuse
+fuseinclude_HEADERS = \
+	fuse.h			\
+	fuse_compat.h		\
+	fuse_common.h		\
+	fuse_common_compat.h    \
+	fuse_lowlevel.h		\
+	fuse_lowlevel_compat.h	\
+	fuse_opt.h		\
+	cuse_lowlevel.h
+
+include_HEADERS = old/fuse.h ulockmgr.h
+noinst_HEADERS = fuse_kernel.h
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu include/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status include/config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-fuseincludeHEADERS: $(fuseinclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(fuseincludedir)" || $(MKDIR_P) "$(DESTDIR)$(fuseincludedir)"
+	@list='$(fuseinclude_HEADERS)'; test -n "$(fuseincludedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(fuseincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(fuseincludedir)" || exit $$?; \
+	done
+
+uninstall-fuseincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(fuseinclude_HEADERS)'; test -n "$(fuseincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(fuseincludedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(fuseincludedir)" && rm -f $$files
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(includedir)" && rm -f $$files
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) config.h
+installdirs:
+	for dir in "$(DESTDIR)$(fuseincludedir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-fuseincludeHEADERS install-includeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-fuseincludeHEADERS uninstall-includeHEADERS
+
+.MAKE: all install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libtool ctags distclean distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-fuseincludeHEADERS install-html \
+	install-html-am install-includeHEADERS install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-fuseincludeHEADERS \
+	uninstall-includeHEADERS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/fuse/include/Makefile.am b/fuse/include/Makefile.am
new file mode 100644
index 0000000..663e164
--- /dev/null
+++ b/fuse/include/Makefile.am
@@ -0,0 +1,17 @@
+## Process this file with automake to produce Makefile.in
+
+fuseincludedir=$(includedir)/fuse
+
+fuseinclude_HEADERS = \
+	fuse.h			\
+	fuse_compat.h		\
+	fuse_common.h		\
+	fuse_common_compat.h    \
+	fuse_lowlevel.h		\
+	fuse_lowlevel_compat.h	\
+	fuse_opt.h		\
+	cuse_lowlevel.h
+
+include_HEADERS = old/fuse.h ulockmgr.h
+
+noinst_HEADERS = fuse_kernel.h
diff --git a/fuse/include/Makefile.in b/fuse/include/Makefile.in
new file mode 100644
index 0000000..1ae6d85
--- /dev/null
+++ b/fuse/include/Makefile.in
@@ -0,0 +1,515 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = include
+DIST_COMMON = $(fuseinclude_HEADERS) $(include_HEADERS) \
+	$(noinst_HEADERS) $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/config.h.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(fuseincludedir)" \
+	"$(DESTDIR)$(includedir)"
+HEADERS = $(fuseinclude_HEADERS) $(include_HEADERS) $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INIT_D_PATH = @INIT_D_PATH@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MOUNT_FUSE_PATH = @MOUNT_FUSE_PATH@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+UDEV_RULES_PATH = @UDEV_RULES_PATH@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libfuse_libs = @libfuse_libs@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfigdir = @pkgconfigdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs2 = @subdirs2@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+fuseincludedir = $(includedir)/fuse
+fuseinclude_HEADERS = \
+	fuse.h			\
+	fuse_compat.h		\
+	fuse_common.h		\
+	fuse_common_compat.h    \
+	fuse_lowlevel.h		\
+	fuse_lowlevel_compat.h	\
+	fuse_opt.h		\
+	cuse_lowlevel.h
+
+include_HEADERS = old/fuse.h ulockmgr.h
+noinst_HEADERS = fuse_kernel.h
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu include/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status include/config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-fuseincludeHEADERS: $(fuseinclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(fuseincludedir)" || $(MKDIR_P) "$(DESTDIR)$(fuseincludedir)"
+	@list='$(fuseinclude_HEADERS)'; test -n "$(fuseincludedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(fuseincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(fuseincludedir)" || exit $$?; \
+	done
+
+uninstall-fuseincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(fuseinclude_HEADERS)'; test -n "$(fuseincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(fuseincludedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(fuseincludedir)" && rm -f $$files
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(includedir)" && rm -f $$files
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS) config.h
+installdirs:
+	for dir in "$(DESTDIR)$(fuseincludedir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-fuseincludeHEADERS install-includeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-fuseincludeHEADERS uninstall-includeHEADERS
+
+.MAKE: all install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libtool ctags distclean distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-fuseincludeHEADERS install-html \
+	install-html-am install-includeHEADERS install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-fuseincludeHEADERS \
+	uninstall-includeHEADERS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/fuse/include/config.h b/fuse/include/config.h
new file mode 100644
index 0000000..a0c603a
--- /dev/null
+++ b/fuse/include/config.h
@@ -0,0 +1,87 @@
+/* include/config.h.  Generated from config.h.in by configure.  */
+/* include/config.h.in.  Generated from configure.in by autoheader.  */
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#define HAVE_DLFCN_H 1
+
+/* Define to 1 if you have the `fdatasync' function. */
+#define HAVE_FDATASYNC 1
+
+/* Define to 1 if you have the `fork' function. */
+#define HAVE_FORK 1
+
+/* Define if you have the iconv() function and it works. */
+#define HAVE_ICONV 1
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define to 1 if you have the `setxattr' function. */
+#define HAVE_SETXATTR 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if `st_atim' is member of `struct stat'. */
+//#define HAVE_STRUCT_STAT_ST_ATIM 0
+
+/* Define to 1 if `st_atimespec' is member of `struct stat'. */
+/* #undef HAVE_STRUCT_STAT_ST_ATIMESPEC */
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define as const if the declaration of iconv() needs const. */
+#define ICONV_CONST 
+
+/* Don't update /etc/mtab */
+/* #undef IGNORE_MTAB */
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#define LT_OBJDIR ".libs/"
+
+/* Define to 1 if your C compiler doesn't accept -c and -o together. */
+/* #undef NO_MINUS_C_MINUS_O */
+
+/* Name of package */
+#define PACKAGE "fuse"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT ""
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "fuse"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "fuse 2.8.5"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "fuse"
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "2.8.5"
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Version number of package */
+#define VERSION "2.8.5"
diff --git a/fuse/include/config.h.in b/fuse/include/config.h.in
new file mode 100644
index 0000000..3e7c14c
--- /dev/null
+++ b/fuse/include/config.h.in
@@ -0,0 +1,86 @@
+/* include/config.h.in.  Generated from configure.in by autoheader.  */
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the `fdatasync' function. */
+#undef HAVE_FDATASYNC
+
+/* Define to 1 if you have the `fork' function. */
+#undef HAVE_FORK
+
+/* Define if you have the iconv() function and it works. */
+#undef HAVE_ICONV
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `setxattr' function. */
+#undef HAVE_SETXATTR
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if `st_atim' is member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIM
+
+/* Define to 1 if `st_atimespec' is member of `struct stat'. */
+#undef HAVE_STRUCT_STAT_ST_ATIMESPEC
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define as const if the declaration of iconv() needs const. */
+#undef ICONV_CONST
+
+/* Don't update /etc/mtab */
+#undef IGNORE_MTAB
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
+/* Define to 1 if your C compiler doesn't accept -c and -o together. */
+#undef NO_MINUS_C_MINUS_O
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
diff --git a/fuse/include/cuse_lowlevel.h b/fuse/include/cuse_lowlevel.h
new file mode 100644
index 0000000..d628eac
--- /dev/null
+++ b/fuse/include/cuse_lowlevel.h
@@ -0,0 +1,87 @@
+/*
+  CUSE: Character device in Userspace
+  Copyright (C) 2008-2009  SUSE Linux Products GmbH
+  Copyright (C) 2008-2009  Tejun Heo <tj@kernel.org>
+
+  This program can be distributed under the terms of the GNU LGPLv2.
+  See the file COPYING.LIB.
+
+  Read example/cusexmp.c for usages.
+*/
+
+#ifndef _CUSE_LOWLEVEL_H_
+#define _CUSE_LOWLEVEL_H_
+
+#ifndef FUSE_USE_VERSION
+#define FUSE_USE_VERSION 29
+#endif
+
+#include "fuse_lowlevel.h"
+
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/uio.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define CUSE_UNRESTRICTED_IOCTL		(1 << 0) /* use unrestricted ioctl */
+
+struct fuse_session;
+
+struct cuse_info {
+	unsigned	dev_major;
+	unsigned	dev_minor;
+	unsigned	dev_info_argc;
+	const char	**dev_info_argv;
+	unsigned	flags;
+};
+
+/*
+ * Most ops behave almost identically to the matching fuse_lowlevel
+ * ops except that they don't take @ino.
+ *
+ * init_done	: called after initialization is complete
+ * read/write	: always direct IO, simultaneous operations allowed
+ * ioctl	: might be in unrestricted mode depending on ci->flags
+ */
+struct cuse_lowlevel_ops {
+	void (*init) (void *userdata, struct fuse_conn_info *conn);
+	void (*init_done) (void *userdata);
+	void (*destroy) (void *userdata);
+	void (*open) (fuse_req_t req, struct fuse_file_info *fi);
+	void (*read) (fuse_req_t req, size_t size, off64_t off,
+		      struct fuse_file_info *fi);
+	void (*write) (fuse_req_t req, const char *buf, size_t size, off64_t off,
+		       struct fuse_file_info *fi);
+	void (*flush) (fuse_req_t req, struct fuse_file_info *fi);
+	void (*release) (fuse_req_t req, struct fuse_file_info *fi);
+	void (*fsync) (fuse_req_t req, int datasync, struct fuse_file_info *fi);
+	void (*ioctl) (fuse_req_t req, int cmd, void *arg,
+		       struct fuse_file_info *fi, unsigned int flags,
+		       const void *in_buf, size_t in_bufsz, size_t out_bufsz);
+	void (*poll) (fuse_req_t req, struct fuse_file_info *fi,
+		      struct fuse_pollhandle *ph);
+};
+
+struct fuse_session *cuse_lowlevel_new(struct fuse_args *args,
+				       const struct cuse_info *ci,
+				       const struct cuse_lowlevel_ops *clop,
+				       void *userdata);
+
+struct fuse_session *cuse_lowlevel_setup(int argc, char *argv[],
+					 const struct cuse_info *ci,
+					 const struct cuse_lowlevel_ops *clop,
+					 int *multithreaded, void *userdata);
+
+void cuse_lowlevel_teardown(struct fuse_session *se);
+
+int cuse_lowlevel_main(int argc, char *argv[], const struct cuse_info *ci,
+		       const struct cuse_lowlevel_ops *clop, void *userdata);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _CUSE_LOWLEVEL_H_ */
diff --git a/fuse/include/fuse.h b/fuse/include/fuse.h
new file mode 100644
index 0000000..899830f
--- /dev/null
+++ b/fuse/include/fuse.h
@@ -0,0 +1,928 @@
+/*
+  FUSE: Filesystem in Userspace
+  Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
+
+  This program can be distributed under the terms of the GNU LGPLv2.
+  See the file COPYING.LIB.
+*/
+
+#ifndef _FUSE_H_
+#define _FUSE_H_
+
+/** @file
+ *
+ * This file defines the library interface of FUSE
+ *
+ * IMPORTANT: you should define FUSE_USE_VERSION before including this
+ * header.  To use the newest API define it to 26 (recommended for any
+ * new application), to use the old API define it to 21 (default) 22
+ * or 25, to use the even older 1.X API define it to 11.
+ */
+
+#ifndef FUSE_USE_VERSION
+#define FUSE_USE_VERSION 28
+#endif
+
+#include "fuse_common.h"
+
+#include <fcntl.h>
+#include <time.h>
+#include <utime.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/statvfs.h>
+#include <sys/uio.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ----------------------------------------------------------- *
+ * Basic FUSE API					       *
+ * ----------------------------------------------------------- */
+
+/** Handle for a FUSE filesystem */
+struct fuse;
+
+/** Structure containing a raw command */
+struct fuse_cmd;
+
+/** Function to add an entry in a readdir() operation
+ *
+ * @param buf the buffer passed to the readdir() operation
+ * @param name the file name of the directory entry
+ * @param stat file attributes, can be NULL
+ * @param off offset of the next entry or zero
+ * @return 1 if buffer is full, zero otherwise
+ */
+typedef int (*fuse_fill_dir_t) (void *buf, const char *name,
+				const struct stat *stbuf, off64_t off);
+
+/* Used by deprecated getdir() method */
+typedef struct fuse_dirhandle *fuse_dirh_t;
+typedef int (*fuse_dirfil_t) (fuse_dirh_t h, const char *name, int type,
+			      ino_t ino);
+
+/**
+ * The file system operations:
+ *
+ * Most of these should work very similarly to the well known UNIX
+ * file system operations.  A major exception is that instead of
+ * returning an error in 'errno', the operation should return the
+ * negated error value (-errno) directly.
+ *
+ * All methods are optional, but some are essential for a useful
+ * filesystem (e.g. getattr).  Open, flush, release, fsync, opendir,
+ * releasedir, fsyncdir, access, create, ftruncate, fgetattr, lock,
+ * init and destroy are special purpose methods, without which a full
+ * featured filesystem can still be implemented.
+ *
+ * Almost all operations take a path which can be of any length.
+ *
+ * Changed in fuse 2.8.0 (regardless of API version)
+ * Previously, paths were limited to a length of PATH_MAX.
+ *
+ * See http://fuse.sourceforge.net/wiki/ for more information.  There
+ * is also a snapshot of the relevant wiki pages in the doc/ folder.
+ */
+struct fuse_operations {
+	/** Get file attributes.
+	 *
+	 * Similar to stat().  The 'st_dev' and 'st_blksize' fields are
+	 * ignored.	 The 'st_ino' field is ignored except if the 'use_ino'
+	 * mount option is given.
+	 */
+	int (*getattr) (const char *, struct stat *);
+
+	/** Read the target of a symbolic link
+	 *
+	 * The buffer should be filled with a null terminated string.  The
+	 * buffer size argument includes the space for the terminating
+	 * null character.	If the linkname is too long to fit in the
+	 * buffer, it should be truncated.	The return value should be 0
+	 * for success.
+	 */
+	int (*readlink) (const char *, char *, size_t);
+
+	/* Deprecated, use readdir() instead */
+	int (*getdir) (const char *, fuse_dirh_t, fuse_dirfil_t);
+
+	/** Create a file node
+	 *
+	 * This is called for creation of all non-directory, non-symlink
+	 * nodes.  If the filesystem defines a create() method, then for
+	 * regular files that will be called instead.
+	 */
+	int (*mknod) (const char *, mode_t, dev_t);
+
+	/** Create a directory 
+	 *
+	 * Note that the mode argument may not have the type specification
+	 * bits set, i.e. S_ISDIR(mode) can be false.  To obtain the
+	 * correct directory type bits use  mode|S_IFDIR
+	 * */
+	int (*mkdir) (const char *, mode_t);
+
+	/** Remove a file */
+	int (*unlink) (const char *);
+
+	/** Remove a directory */
+	int (*rmdir) (const char *);
+
+	/** Create a symbolic link */
+	int (*symlink) (const char *, const char *);
+
+	/** Rename a file */
+	int (*rename) (const char *, const char *);
+
+	/** Create a hard link to a file */
+	int (*link) (const char *, const char *);
+
+	/** Change the permission bits of a file */
+	int (*chmod) (const char *, mode_t);
+
+	/** Change the owner and group of a file */
+	int (*chown) (const char *, uid_t, gid_t);
+
+	/** Change the size of a file */
+	int (*truncate) (const char *, off64_t);
+
+	/** Change the access and/or modification times of a file
+	 *
+	 * Deprecated, use utimens() instead.
+	 */
+	int (*utime) (const char *, struct utimbuf *);
+
+	/** File open operation
+	 *
+	 * No creation (O_CREAT, O_EXCL) and by default also no
+	 * truncation (O_TRUNC) flags will be passed to open(). If an
+	 * application specifies O_TRUNC, fuse first calls truncate()
+	 * and then open(). Only if 'atomic_o_trunc' has been
+	 * specified and kernel version is 2.6.24 or later, O_TRUNC is
+	 * passed on to open.
+	 *
+	 * Unless the 'default_permissions' mount option is given,
+	 * open should check if the operation is permitted for the
+	 * given flags. Optionally open may also return an arbitrary
+	 * filehandle in the fuse_file_info structure, which will be
+	 * passed to all file operations.
+	 *
+	 * Changed in version 2.2
+	 */
+	int (*open) (const char *, struct fuse_file_info *);
+
+	/** Read data from an open file
+	 *
+	 * Read should return exactly the number of bytes requested except
+	 * on EOF or error, otherwise the rest of the data will be
+	 * substituted with zeroes.	 An exception to this is when the
+	 * 'direct_io' mount option is specified, in which case the return
+	 * value of the read system call will reflect the return value of
+	 * this operation.
+	 *
+	 * Changed in version 2.2
+	 */
+	int (*read) (const char *, char *, size_t, off64_t,
+		     struct fuse_file_info *);
+
+	/** Write data to an open file
+	 *
+	 * Write should return exactly the number of bytes requested
+	 * except on error.	 An exception to this is when the 'direct_io'
+	 * mount option is specified (see read operation).
+	 *
+	 * Changed in version 2.2
+	 */
+	int (*write) (const char *, const char *, size_t, off64_t,
+		      struct fuse_file_info *);
+
+	/** Get file system statistics
+	 *
+	 * The 'f_frsize', 'f_favail', 'f_fsid' and 'f_flag' fields are ignored
+	 *
+	 * Replaced 'struct statfs' parameter with 'struct statvfs' in
+	 * version 2.5
+	 */
+	int (*statfs) (const char *, struct statvfs *);
+
+	/** Possibly flush cached data
+	 *
+	 * BIG NOTE: This is not equivalent to fsync().  It's not a
+	 * request to sync dirty data.
+	 *
+	 * Flush is called on each close() of a file descriptor.  So if a
+	 * filesystem wants to return write errors in close() and the file
+	 * has cached dirty data, this is a good place to write back data
+	 * and return any errors.  Since many applications ignore close()
+	 * errors this is not always useful.
+	 *
+	 * NOTE: The flush() method may be called more than once for each
+	 * open().	This happens if more than one file descriptor refers
+	 * to an opened file due to dup(), dup2() or fork() calls.	It is
+	 * not possible to determine if a flush is final, so each flush
+	 * should be treated equally.  Multiple write-flush sequences are
+	 * relatively rare, so this shouldn't be a problem.
+	 *
+	 * Filesystems shouldn't assume that flush will always be called
+	 * after some writes, or that if will be called at all.
+	 *
+	 * Changed in version 2.2
+	 */
+	int (*flush) (const char *, struct fuse_file_info *);
+
+	/** Release an open file
+	 *
+	 * Release is called when there are no more references to an open
+	 * file: all file descriptors are closed and all memory mappings
+	 * are unmapped.
+	 *
+	 * For every open() call there will be exactly one release() call
+	 * with the same flags and file descriptor.	 It is possible to
+	 * have a file opened more than once, in which case only the last
+	 * release will mean, that no more reads/writes will happen on the
+	 * file.  The return value of release is ignored.
+	 *
+	 * Changed in version 2.2
+	 */
+	int (*release) (const char *, struct fuse_file_info *);
+
+	/** Synchronize file contents
+	 *
+	 * If the datasync parameter is non-zero, then only the user data
+	 * should be flushed, not the meta data.
+	 *
+	 * Changed in version 2.2
+	 */
+	int (*fsync) (const char *, int, struct fuse_file_info *);
+
+	/** Set extended attributes */
+	int (*setxattr) (const char *, const char *, const char *, size_t, int);
+
+	/** Get extended attributes */
+	int (*getxattr) (const char *, const char *, char *, size_t);
+
+	/** List extended attributes */
+	int (*listxattr) (const char *, char *, size_t);
+
+	/** Remove extended attributes */
+	int (*removexattr) (const char *, const char *);
+
+	/** Open directory
+	 *
+	 * Unless the 'default_permissions' mount option is given,
+	 * this method should check if opendir is permitted for this
+	 * directory. Optionally opendir may also return an arbitrary
+	 * filehandle in the fuse_file_info structure, which will be
+	 * passed to readdir, closedir and fsyncdir.
+	 *
+	 * Introduced in version 2.3
+	 */
+	int (*opendir) (const char *, struct fuse_file_info *);
+
+	/** Read directory
+	 *
+	 * This supersedes the old getdir() interface.  New applications
+	 * should use this.
+	 *
+	 * The filesystem may choose between two modes of operation:
+	 *
+	 * 1) The readdir implementation ignores the offset parameter, and
+	 * passes zero to the filler function's offset.  The filler
+	 * function will not return '1' (unless an error happens), so the
+	 * whole directory is read in a single readdir operation.  This
+	 * works just like the old getdir() method.
+	 *
+	 * 2) The readdir implementation keeps track of the offsets of the
+	 * directory entries.  It uses the offset parameter and always
+	 * passes non-zero offset to the filler function.  When the buffer
+	 * is full (or an error happens) the filler function will return
+	 * '1'.
+	 *
+	 * Introduced in version 2.3
+	 */
+	int (*readdir) (const char *, void *, fuse_fill_dir_t, off64_t,
+			struct fuse_file_info *);
+
+	/** Release directory
+	 *
+	 * Introduced in version 2.3
+	 */
+	int (*releasedir) (const char *, struct fuse_file_info *);
+
+	/** Synchronize directory contents
+	 *
+	 * If the datasync parameter is non-zero, then only the user data
+	 * should be flushed, not the meta data
+	 *
+	 * Introduced in version 2.3
+	 */
+	int (*fsyncdir) (const char *, int, struct fuse_file_info *);
+
+	/**
+	 * Initialize filesystem
+	 *
+	 * The return value will passed in the private_data field of
+	 * fuse_context to all file operations and as a parameter to the
+	 * destroy() method.
+	 *
+	 * Introduced in version 2.3
+	 * Changed in version 2.6
+	 */
+	void *(*init) (struct fuse_conn_info *conn);
+
+	/**
+	 * Clean up filesystem
+	 *
+	 * Called on filesystem exit.
+	 *
+	 * Introduced in version 2.3
+	 */
+	void (*destroy) (void *);
+
+	/**
+	 * Check file access permissions
+	 *
+	 * This will be called for the access() system call.  If the
+	 * 'default_permissions' mount option is given, this method is not
+	 * called.
+	 *
+	 * This method is not called under Linux kernel versions 2.4.x
+	 *
+	 * Introduced in version 2.5
+	 */
+	int (*access) (const char *, int);
+
+	/**
+	 * Create and open a file
+	 *
+	 * If the file does not exist, first create it with the specified
+	 * mode, and then open it.
+	 *
+	 * If this method is not implemented or under Linux kernel
+	 * versions earlier than 2.6.15, the mknod() and open() methods
+	 * will be called instead.
+	 *
+	 * Introduced in version 2.5
+	 */
+	int (*create) (const char *, mode_t, struct fuse_file_info *);
+
+	/**
+	 * Change the size of an open file
+	 *
+	 * This method is called instead of the truncate() method if the
+	 * truncation was invoked from an ftruncate() system call.
+	 *
+	 * If this method is not implemented or under Linux kernel
+	 * versions earlier than 2.6.15, the truncate() method will be
+	 * called instead.
+	 *
+	 * Introduced in version 2.5
+	 */
+	int (*ftruncate) (const char *, off64_t, struct fuse_file_info *);
+
+	/**
+	 * Get attributes from an open file
+	 *
+	 * This method is called instead of the getattr() method if the
+	 * file information is available.
+	 *
+	 * Currently this is only called after the create() method if that
+	 * is implemented (see above).  Later it may be called for
+	 * invocations of fstat() too.
+	 *
+	 * Introduced in version 2.5
+	 */
+	int (*fgetattr) (const char *, struct stat *, struct fuse_file_info *);
+
+	/**
+	 * Perform POSIX file locking operation
+	 *
+	 * The cmd argument will be either F_GETLK, F_SETLK or F_SETLKW.
+	 *
+	 * For the meaning of fields in 'struct flock' see the man page
+	 * for fcntl(2).  The l_whence field will always be set to
+	 * SEEK_SET.
+	 *
+	 * For checking lock ownership, the 'fuse_file_info->owner'
+	 * argument must be used.
+	 *
+	 * For F_GETLK operation, the library will first check currently
+	 * held locks, and if a conflicting lock is found it will return
+	 * information without calling this method.	 This ensures, that
+	 * for local locks the l_pid field is correctly filled in.	The
+	 * results may not be accurate in case of race conditions and in
+	 * the presence of hard links, but it's unlikly that an
+	 * application would rely on accurate GETLK results in these
+	 * cases.  If a conflicting lock is not found, this method will be
+	 * called, and the filesystem may fill out l_pid by a meaningful
+	 * value, or it may leave this field zero.
+	 *
+	 * For F_SETLK and F_SETLKW the l_pid field will be set to the pid
+	 * of the process performing the locking operation.
+	 *
+	 * Note: if this method is not implemented, the kernel will still
+	 * allow file locking to work locally.  Hence it is only
+	 * interesting for network filesystems and similar.
+	 *
+	 * Introduced in version 2.6
+	 */
+	int (*lock) (const char *, struct fuse_file_info *, int cmd,
+		     struct flock *);
+
+	/**
+	 * Change the access and modification times of a file with
+	 * nanosecond resolution
+	 *
+	 * Introduced in version 2.6
+	 */
+	int (*utimens) (const char *, const struct timespec tv[2]);
+
+	/**
+	 * Map block index within file to block index within device
+	 *
+	 * Note: This makes sense only for block device backed filesystems
+	 * mounted with the 'blkdev' option
+	 *
+	 * Introduced in version 2.6
+	 */
+	int (*bmap) (const char *, size_t blocksize, uint64_t *idx);
+
+	/**
+	 * Flag indicating, that the filesystem can accept a NULL path
+	 * as the first argument for the following operations:
+	 *
+	 * read, write, flush, release, fsync, readdir, releasedir,
+	 * fsyncdir, ftruncate, fgetattr and lock
+	 */
+	unsigned int flag_nullpath_ok : 1;
+
+	/**
+	 * Reserved flags, don't set
+	 */
+	unsigned int flag_reserved : 31;
+
+	/**
+	 * Ioctl
+	 *
+	 * flags will have FUSE_IOCTL_COMPAT set for 32bit ioctls in
+	 * 64bit environment.  The size and direction of data is
+	 * determined by _IOC_*() decoding of cmd.  For _IOC_NONE,
+	 * data will be NULL, for _IOC_WRITE data is out area, for
+	 * _IOC_READ in area and if both are set in/out area.  In all
+	 * non-NULL cases, the area is of _IOC_SIZE(cmd) bytes.
+	 *
+	 * Introduced in version 2.8
+	 */
+	int (*ioctl) (const char *, int cmd, void *arg,
+		      struct fuse_file_info *, unsigned int flags, void *data);
+
+	/**
+	 * Poll for IO readiness events
+	 *
+	 * Note: If ph is non-NULL, the client should notify
+	 * when IO readiness events occur by calling
+	 * fuse_notify_poll() with the specified ph.
+	 *
+	 * Regardless of the number of times poll with a non-NULL ph
+	 * is received, single notification is enough to clear all.
+	 * Notifying more times incurs overhead but doesn't harm
+	 * correctness.
+	 *
+	 * The callee is responsible for destroying ph with
+	 * fuse_pollhandle_destroy() when no longer in use.
+	 *
+	 * Introduced in version 2.8
+	 */
+	int (*poll) (const char *, struct fuse_file_info *,
+		     struct fuse_pollhandle *ph, unsigned *reventsp);
+};
+
+/** Extra context that may be needed by some filesystems
+ *
+ * The uid, gid and pid fields are not filled in case of a writepage
+ * operation.
+ */
+struct fuse_context {
+	/** Pointer to the fuse object */
+	struct fuse *fuse;
+
+	/** User ID of the calling process */
+	uid_t uid;
+
+	/** Group ID of the calling process */
+	gid_t gid;
+
+	/** Thread ID of the calling process */
+	pid_t pid;
+
+	/** Private filesystem data */
+	void *private_data;
+
+	/** Umask of the calling process (introduced in version 2.8) */
+	mode_t umask;
+};
+
+/**
+ * Main function of FUSE.
+ *
+ * This is for the lazy.  This is all that has to be called from the
+ * main() function.
+ *
+ * This function does the following:
+ *   - parses command line options (-d -s and -h)
+ *   - passes relevant mount options to the fuse_mount()
+ *   - installs signal handlers for INT, HUP, TERM and PIPE
+ *   - registers an exit handler to unmount the filesystem on program exit
+ *   - creates a fuse handle
+ *   - registers the operations
+ *   - calls either the single-threaded or the multi-threaded event loop
+ *
+ * Note: this is currently implemented as a macro.
+ *
+ * @param argc the argument counter passed to the main() function
+ * @param argv the argument vector passed to the main() function
+ * @param op the file system operation
+ * @param user_data user data supplied in the context during the init() method
+ * @return 0 on success, nonzero on failure
+ */
+/*
+  int fuse_main(int argc, char *argv[], const struct fuse_operations *op,
+  void *user_data);
+*/
+#define fuse_main(argc, argv, op, user_data)				\
+	fuse_main_real(argc, argv, op, sizeof(*(op)), user_data)
+
+/* ----------------------------------------------------------- *
+ * More detailed API					       *
+ * ----------------------------------------------------------- */
+
+/**
+ * Create a new FUSE filesystem.
+ *
+ * @param ch the communication channel
+ * @param args argument vector
+ * @param op the filesystem operations
+ * @param op_size the size of the fuse_operations structure
+ * @param user_data user data supplied in the context during the init() method
+ * @return the created FUSE handle
+ */
+struct fuse *fuse_new(struct fuse_chan *ch, struct fuse_args *args,
+		      const struct fuse_operations *op, size_t op_size,
+		      void *user_data);
+
+/**
+ * Destroy the FUSE handle.
+ *
+ * The communication channel attached to the handle is also destroyed.
+ *
+ * NOTE: This function does not unmount the filesystem.	 If this is
+ * needed, call fuse_unmount() before calling this function.
+ *
+ * @param f the FUSE handle
+ */
+void fuse_destroy(struct fuse *f);
+
+/**
+ * FUSE event loop.
+ *
+ * Requests from the kernel are processed, and the appropriate
+ * operations are called.
+ *
+ * @param f the FUSE handle
+ * @return 0 if no error occurred, -1 otherwise
+ */
+int fuse_loop(struct fuse *f);
+
+/**
+ * Exit from event loop
+ *
+ * @param f the FUSE handle
+ */
+void fuse_exit(struct fuse *f);
+
+/**
+ * FUSE event loop with multiple threads
+ *
+ * Requests from the kernel are processed, and the appropriate
+ * operations are called.  Request are processed in parallel by
+ * distributing them between multiple threads.
+ *
+ * Calling this function requires the pthreads library to be linked to
+ * the application.
+ *
+ * @param f the FUSE handle
+ * @return 0 if no error occurred, -1 otherwise
+ */
+int fuse_loop_mt(struct fuse *f);
+
+/**
+ * Get the current context
+ *
+ * The context is only valid for the duration of a filesystem
+ * operation, and thus must not be stored and used later.
+ *
+ * @return the context
+ */
+struct fuse_context *fuse_get_context(void);
+
+/**
+ * Get the current supplementary group IDs for the current request
+ *
+ * Similar to the getgroups(2) system call, except the return value is
+ * always the total number of group IDs, even if it is larger than the
+ * specified size.
+ *
+ * The current fuse kernel module in linux (as of 2.6.30) doesn't pass
+ * the group list to userspace, hence this function needs to parse
+ * "/proc/$TID/task/$TID/status" to get the group IDs.
+ *
+ * This feature may not be supported on all operating systems.  In
+ * such a case this function will return -ENOSYS.
+ *
+ * @param size size of given array
+ * @param list array of group IDs to be filled in
+ * @return the total number of supplementary group IDs or -errno on failure
+ */
+int fuse_getgroups(int size, gid_t list[]);
+
+/**
+ * Check if the current request has already been interrupted
+ *
+ * @return 1 if the request has been interrupted, 0 otherwise
+ */
+int fuse_interrupted(void);
+
+/**
+ * Obsolete, doesn't do anything
+ *
+ * @return -EINVAL
+ */
+int fuse_invalidate(struct fuse *f, const char *path);
+
+/* Deprecated, don't use */
+int fuse_is_lib_option(const char *opt);
+
+/**
+ * The real main function
+ *
+ * Do not call this directly, use fuse_main()
+ */
+int fuse_main_real(int argc, char *argv[], const struct fuse_operations *op,
+		   size_t op_size, void *user_data);
+
+/*
+ * Stacking API
+ */
+
+/**
+ * Fuse filesystem object
+ *
+ * This is opaque object represents a filesystem layer
+ */
+struct fuse_fs;
+
+/*
+ * These functions call the relevant filesystem operation, and return
+ * the result.
+ *
+ * If the operation is not defined, they return -ENOSYS, with the
+ * exception of fuse_fs_open, fuse_fs_release, fuse_fs_opendir,
+ * fuse_fs_releasedir and fuse_fs_statfs, which return 0.
+ */
+
+int fuse_fs_getattr(struct fuse_fs *fs, const char *path, struct stat *buf);
+int fuse_fs_fgetattr(struct fuse_fs *fs, const char *path, struct stat *buf,
+		     struct fuse_file_info *fi);
+int fuse_fs_rename(struct fuse_fs *fs, const char *oldpath,
+		   const char *newpath);
+int fuse_fs_unlink(struct fuse_fs *fs, const char *path);
+int fuse_fs_rmdir(struct fuse_fs *fs, const char *path);
+int fuse_fs_symlink(struct fuse_fs *fs, const char *linkname,
+		    const char *path);
+int fuse_fs_link(struct fuse_fs *fs, const char *oldpath, const char *newpath);
+int fuse_fs_release(struct fuse_fs *fs,	 const char *path,
+		    struct fuse_file_info *fi);
+int fuse_fs_open(struct fuse_fs *fs, const char *path,
+		 struct fuse_file_info *fi);
+int fuse_fs_read(struct fuse_fs *fs, const char *path, char *buf, size_t size,
+		 off64_t off, struct fuse_file_info *fi);
+int fuse_fs_write(struct fuse_fs *fs, const char *path, const char *buf,
+		  size_t size, off64_t off, struct fuse_file_info *fi);
+int fuse_fs_fsync(struct fuse_fs *fs, const char *path, int datasync,
+		  struct fuse_file_info *fi);
+int fuse_fs_flush(struct fuse_fs *fs, const char *path,
+		  struct fuse_file_info *fi);
+int fuse_fs_statfs(struct fuse_fs *fs, const char *path, struct statvfs *buf);
+int fuse_fs_opendir(struct fuse_fs *fs, const char *path,
+		    struct fuse_file_info *fi);
+int fuse_fs_readdir(struct fuse_fs *fs, const char *path, void *buf,
+		    fuse_fill_dir_t filler, off64_t off,
+		    struct fuse_file_info *fi);
+int fuse_fs_fsyncdir(struct fuse_fs *fs, const char *path, int datasync,
+		     struct fuse_file_info *fi);
+int fuse_fs_releasedir(struct fuse_fs *fs, const char *path,
+		       struct fuse_file_info *fi);
+int fuse_fs_create(struct fuse_fs *fs, const char *path, mode_t mode,
+		   struct fuse_file_info *fi);
+int fuse_fs_lock(struct fuse_fs *fs, const char *path,
+		 struct fuse_file_info *fi, int cmd, struct flock *lock);
+int fuse_fs_chmod(struct fuse_fs *fs, const char *path, mode_t mode);
+int fuse_fs_chown(struct fuse_fs *fs, const char *path, uid_t uid, gid_t gid);
+int fuse_fs_truncate(struct fuse_fs *fs, const char *path, off64_t size);
+int fuse_fs_ftruncate(struct fuse_fs *fs, const char *path, off64_t size,
+		      struct fuse_file_info *fi);
+int fuse_fs_utimens(struct fuse_fs *fs, const char *path,
+		    const struct timespec tv[2]);
+int fuse_fs_access(struct fuse_fs *fs, const char *path, int mask);
+int fuse_fs_readlink(struct fuse_fs *fs, const char *path, char *buf,
+		     size_t len);
+int fuse_fs_mknod(struct fuse_fs *fs, const char *path, mode_t mode,
+		  dev_t rdev);
+int fuse_fs_mkdir(struct fuse_fs *fs, const char *path, mode_t mode);
+int fuse_fs_setxattr(struct fuse_fs *fs, const char *path, const char *name,
+		     const char *value, size_t size, int flags);
+int fuse_fs_getxattr(struct fuse_fs *fs, const char *path, const char *name,
+		     char *value, size_t size);
+int fuse_fs_listxattr(struct fuse_fs *fs, const char *path, char *list,
+		      size_t size);
+int fuse_fs_removexattr(struct fuse_fs *fs, const char *path,
+			const char *name);
+int fuse_fs_bmap(struct fuse_fs *fs, const char *path, size_t blocksize,
+		 uint64_t *idx);
+int fuse_fs_ioctl(struct fuse_fs *fs, const char *path, int cmd, void *arg,
+		  struct fuse_file_info *fi, unsigned int flags, void *data);
+int fuse_fs_poll(struct fuse_fs *fs, const char *path,
+		 struct fuse_file_info *fi, struct fuse_pollhandle *ph,
+		 unsigned *reventsp);
+void fuse_fs_init(struct fuse_fs *fs, struct fuse_conn_info *conn);
+void fuse_fs_destroy(struct fuse_fs *fs);
+
+int fuse_notify_poll(struct fuse_pollhandle *ph);
+
+/**
+ * Create a new fuse filesystem object
+ *
+ * This is usually called from the factory of a fuse module to create
+ * a new instance of a filesystem.
+ *
+ * @param op the filesystem operations
+ * @param op_size the size of the fuse_operations structure
+ * @param user_data user data supplied in the context during the init() method
+ * @return a new filesystem object
+ */
+struct fuse_fs *fuse_fs_new(const struct fuse_operations *op, size_t op_size,
+			    void *user_data);
+
+/**
+ * Filesystem module
+ *
+ * Filesystem modules are registered with the FUSE_REGISTER_MODULE()
+ * macro.
+ *
+ * If the "-omodules=modname:..." option is present, filesystem
+ * objects are created and pushed onto the stack with the 'factory'
+ * function.
+ */
+struct fuse_module {
+	/**
+	 * Name of filesystem
+	 */
+	const char *name;
+
+	/**
+	 * Factory for creating filesystem objects
+	 *
+	 * The function may use and remove options from 'args' that belong
+	 * to this module.
+	 *
+	 * For now the 'fs' vector always contains exactly one filesystem.
+	 * This is the filesystem which will be below the newly created
+	 * filesystem in the stack.
+	 *
+	 * @param args the command line arguments
+	 * @param fs NULL terminated filesystem object vector
+	 * @return the new filesystem object
+	 */
+	struct fuse_fs *(*factory)(struct fuse_args *args,
+				   struct fuse_fs *fs[]);
+
+	struct fuse_module *next;
+	struct fusemod_so *so;
+	int ctr;
+};
+
+/**
+ * Register a filesystem module
+ *
+ * This function is used by FUSE_REGISTER_MODULE and there's usually
+ * no need to call it directly
+ */
+void fuse_register_module(struct fuse_module *mod);
+
+/**
+ * Register filesystem module
+ *
+ * For the parameters, see description of the fields in 'struct
+ * fuse_module'
+ */
+#define FUSE_REGISTER_MODULE(name_, factory_)				  \
+	static __attribute__((constructor)) void name_ ## _register(void) \
+	{								  \
+		static struct fuse_module mod =				  \
+			{ #name_, factory_, NULL, NULL, 0 };		  \
+		fuse_register_module(&mod);				  \
+	}
+
+
+/* ----------------------------------------------------------- *
+ * Advanced API for event handling, don't worry about this...  *
+ * ----------------------------------------------------------- */
+
+/* NOTE: the following functions are deprecated, and will be removed
+   from the 3.0 API.  Use the lowlevel session functions instead */
+
+/** Function type used to process commands */
+typedef void (*fuse_processor_t)(struct fuse *, struct fuse_cmd *, void *);
+
+/** This is the part of fuse_main() before the event loop */
+struct fuse *fuse_setup(int argc, char *argv[],
+			const struct fuse_operations *op, size_t op_size,
+			char **mountpoint, int *multithreaded,
+			void *user_data);
+
+/** This is the part of fuse_main() after the event loop */
+void fuse_teardown(struct fuse *fuse, char *mountpoint);
+
+/** Read a single command.  If none are read, return NULL */
+struct fuse_cmd *fuse_read_cmd(struct fuse *f);
+
+/** Process a single command */
+void fuse_process_cmd(struct fuse *f, struct fuse_cmd *cmd);
+
+/** Multi threaded event loop, which calls the custom command
+    processor function */
+int fuse_loop_mt_proc(struct fuse *f, fuse_processor_t proc, void *data);
+
+/** Return the exited flag, which indicates if fuse_exit() has been
+    called */
+int fuse_exited(struct fuse *f);
+
+/** This function is obsolete and implemented as a no-op */
+void fuse_set_getcontext_func(struct fuse_context *(*func)(void));
+
+/** Get session from fuse object */
+struct fuse_session *fuse_get_session(struct fuse *f);
+
+/* ----------------------------------------------------------- *
+ * Compatibility stuff					       *
+ * ----------------------------------------------------------- */
+
+#if FUSE_USE_VERSION < 26
+#  include "fuse_compat.h"
+#  undef fuse_main
+#  if FUSE_USE_VERSION == 25
+#    define fuse_main(argc, argv, op)				\
+	fuse_main_real_compat25(argc, argv, op, sizeof(*(op)))
+#    define fuse_new fuse_new_compat25
+#    define fuse_setup fuse_setup_compat25
+#    define fuse_teardown fuse_teardown_compat22
+#    define fuse_operations fuse_operations_compat25
+#  elif FUSE_USE_VERSION == 22
+#    define fuse_main(argc, argv, op)				\
+	fuse_main_real_compat22(argc, argv, op, sizeof(*(op)))
+#    define fuse_new fuse_new_compat22
+#    define fuse_setup fuse_setup_compat22
+#    define fuse_teardown fuse_teardown_compat22
+#    define fuse_operations fuse_operations_compat22
+#    define fuse_file_info fuse_file_info_compat
+#  elif FUSE_USE_VERSION == 24
+#    error Compatibility with high-level API version 24 not supported
+#  else
+#    define fuse_dirfil_t fuse_dirfil_t_compat
+#    define __fuse_read_cmd fuse_read_cmd
+#    define __fuse_process_cmd fuse_process_cmd
+#    define __fuse_loop_mt fuse_loop_mt_proc
+#    if FUSE_USE_VERSION == 21
+#      define fuse_operations fuse_operations_compat2
+#      define fuse_main fuse_main_compat2
+#      define fuse_new fuse_new_compat2
+#      define __fuse_setup fuse_setup_compat2
+#      define __fuse_teardown fuse_teardown_compat22
+#      define __fuse_exited fuse_exited
+#      define __fuse_set_getcontext_func fuse_set_getcontext_func
+#    else
+#      define fuse_statfs fuse_statfs_compat1
+#      define fuse_operations fuse_operations_compat1
+#      define fuse_main fuse_main_compat1
+#      define fuse_new fuse_new_compat1
+#      define FUSE_DEBUG FUSE_DEBUG_COMPAT1
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _FUSE_H_ */
diff --git a/fuse/include/fuse_common.h b/fuse/include/fuse_common.h
new file mode 100644
index 0000000..48c0746
--- /dev/null
+++ b/fuse/include/fuse_common.h
@@ -0,0 +1,298 @@
+/*
+  FUSE: Filesystem in Userspace
+  Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
+
+  This program can be distributed under the terms of the GNU LGPLv2.
+  See the file COPYING.LIB.
+*/
+
+/** @file */
+
+#if !defined(_FUSE_H_) && !defined(_FUSE_LOWLEVEL_H_)
+#error "Never include <fuse_common.h> directly; use <fuse.h> or <fuse_lowlevel.h> instead."
+#endif
+
+#ifndef _FUSE_COMMON_H_
+#define _FUSE_COMMON_H_
+
+#include "fuse_opt.h"
+#include <stdint.h>
+
+/** Major version of FUSE library interface */
+#define FUSE_MAJOR_VERSION 2
+
+/** Minor version of FUSE library interface */
+#define FUSE_MINOR_VERSION 8
+
+#define FUSE_MAKE_VERSION(maj, min)  ((maj) * 10 + (min))
+#define FUSE_VERSION 26
+//#define FUSE_VERSION FUSE_MAKE_VERSION(FUSE_MAJOR_VERSION, FUSE_MINOR_VERSION)
+
+/* This interface uses 64 bit off64_t */
+#if _FILE_OFFSET_BITS != 64
+#error Please add -D_FILE_OFFSET_BITS=64 to your compile flags!
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Information about open files
+ *
+ * Changed in version 2.5
+ */
+struct fuse_file_info {
+	/** Open flags.	 Available in open() and release() */
+	int flags;
+
+	/** Old file handle, don't use */
+	unsigned long fh_old;
+
+	/** In case of a write operation indicates if this was caused by a
+	    writepage */
+	int writepage;
+
+	/** Can be filled in by open, to use direct I/O on this file.
+	    Introduced in version 2.4 */
+	unsigned int direct_io : 1;
+
+	/** Can be filled in by open, to indicate, that cached file data
+	    need not be invalidated.  Introduced in version 2.4 */
+	unsigned int keep_cache : 1;
+
+	/** Indicates a flush operation.  Set in flush operation, also
+	    maybe set in highlevel lock operation and lowlevel release
+	    operation.	Introduced in version 2.6 */
+	unsigned int flush : 1;
+
+	/** Can be filled in by open, to indicate that the file is not
+	    seekable.  Introduced in version 2.8 */
+	unsigned int nonseekable : 1;
+
+	/** Padding.  Do not use*/
+	unsigned int padding : 28;
+
+	/** File handle.  May be filled in by filesystem in open().
+	    Available in all other file operations */
+	uint64_t fh;
+
+	/** Lock owner id.  Available in locking operations and flush */
+	uint64_t lock_owner;
+};
+
+/**
+ * Capability bits for 'fuse_conn_info.capable' and 'fuse_conn_info.want'
+ *
+ * FUSE_CAP_ASYNC_READ: filesystem supports asynchronous read requests
+ * FUSE_CAP_POSIX_LOCKS: filesystem supports "remote" locking
+ * FUSE_CAP_ATOMIC_O_TRUNC: filesystem handles the O_TRUNC open flag
+ * FUSE_CAP_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
+ * FUSE_CAP_BIG_WRITES: filesystem can handle write size larger than 4kB
+ * FUSE_CAP_DONT_MASK: don't apply umask to file mode on create operations
+ */
+#define FUSE_CAP_ASYNC_READ	(1 << 0)
+#define FUSE_CAP_POSIX_LOCKS	(1 << 1)
+#define FUSE_CAP_ATOMIC_O_TRUNC	(1 << 3)
+#define FUSE_CAP_EXPORT_SUPPORT	(1 << 4)
+#define FUSE_CAP_BIG_WRITES	(1 << 5)
+#define FUSE_CAP_DONT_MASK	(1 << 6)
+
+/**
+ * Ioctl flags
+ *
+ * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
+ * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
+ * FUSE_IOCTL_RETRY: retry with new iovecs
+ *
+ * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
+ */
+#define FUSE_IOCTL_COMPAT	(1 << 0)
+#define FUSE_IOCTL_UNRESTRICTED	(1 << 1)
+#define FUSE_IOCTL_RETRY	(1 << 2)
+
+#define FUSE_IOCTL_MAX_IOV	256
+
+/**
+ * Connection information, passed to the ->init() method
+ *
+ * Some of the elements are read-write, these can be changed to
+ * indicate the value requested by the filesystem.  The requested
+ * value must usually be smaller than the indicated value.
+ */
+struct fuse_conn_info {
+	/**
+	 * Major version of the protocol (read-only)
+	 */
+	unsigned proto_major;
+
+	/**
+	 * Minor version of the protocol (read-only)
+	 */
+	unsigned proto_minor;
+
+	/**
+	 * Is asynchronous read supported (read-write)
+	 */
+	unsigned async_read;
+
+	/**
+	 * Maximum size of the write buffer
+	 */
+	unsigned max_write;
+
+	/**
+	 * Maximum readahead
+	 */
+	unsigned max_readahead;
+
+	/**
+	 * Capability flags, that the kernel supports
+	 */
+	unsigned capable;
+
+	/**
+	 * Capability flags, that the filesystem wants to enable
+	 */
+	unsigned want;
+
+	/**
+	 * For future use.
+	 */
+	unsigned reserved[25];
+};
+
+struct fuse_session;
+struct fuse_chan;
+struct fuse_pollhandle;
+
+/**
+ * Create a FUSE mountpoint
+ *
+ * Returns a control file descriptor suitable for passing to
+ * fuse_new()
+ *
+ * @param mountpoint the mount point path
+ * @param args argument vector
+ * @return the communication channel on success, NULL on failure
+ */
+struct fuse_chan *fuse_mount(const char *mountpoint, struct fuse_args *args);
+
+/**
+ * Umount a FUSE mountpoint
+ *
+ * @param mountpoint the mount point path
+ * @param ch the communication channel
+ */
+void fuse_unmount(const char *mountpoint, struct fuse_chan *ch);
+
+/**
+ * Parse common options
+ *
+ * The following options are parsed:
+ *
+ *   '-f'	     foreground
+ *   '-d' '-odebug'  foreground, but keep the debug option
+ *   '-s'	     single threaded
+ *   '-h' '--help'   help
+ *   '-ho'	     help without header
+ *   '-ofsname=..'   file system name, if not present, then set to the program
+ *		     name
+ *
+ * All parameters may be NULL
+ *
+ * @param args argument vector
+ * @param mountpoint the returned mountpoint, should be freed after use
+ * @param multithreaded set to 1 unless the '-s' option is present
+ * @param foreground set to 1 if one of the relevant options is present
+ * @return 0 on success, -1 on failure
+ */
+int fuse_parse_cmdline(struct fuse_args *args, char **mountpoint,
+		       int *multithreaded, int *foreground);
+
+/**
+ * Go into the background
+ *
+ * @param foreground if true, stay in the foreground
+ * @return 0 on success, -1 on failure
+ */
+int fuse_daemonize(int foreground);
+
+/**
+ * Get the version of the library
+ *
+ * @return the version
+ */
+int fuse_version(void);
+
+/**
+ * Destroy poll handle
+ *
+ * @param ph the poll handle
+ */
+void fuse_pollhandle_destroy(struct fuse_pollhandle *ph);
+
+/* ----------------------------------------------------------- *
+ * Signal handling					       *
+ * ----------------------------------------------------------- */
+
+/**
+ * Exit session on HUP, TERM and INT signals and ignore PIPE signal
+ *
+ * Stores session in a global variable.	 May only be called once per
+ * process until fuse_remove_signal_handlers() is called.
+ *
+ * @param se the session to exit
+ * @return 0 on success, -1 on failure
+ */
+int fuse_set_signal_handlers(struct fuse_session *se);
+
+/**
+ * Restore default signal handlers
+ *
+ * Resets global session.  After this fuse_set_signal_handlers() may
+ * be called again.
+ *
+ * @param se the same session as given in fuse_set_signal_handlers()
+ */
+void fuse_remove_signal_handlers(struct fuse_session *se);
+
+/* ----------------------------------------------------------- *
+ * Compatibility stuff					       *
+ * ----------------------------------------------------------- */
+
+#if FUSE_USE_VERSION < 26
+#    ifdef __FreeBSD__
+#	 if FUSE_USE_VERSION < 25
+#	     error On FreeBSD API version 25 or greater must be used
+#	 endif
+#    endif
+#    include "fuse_common_compat.h"
+#    undef FUSE_MINOR_VERSION
+#    undef fuse_main
+#    define fuse_unmount fuse_unmount_compat22
+#    if FUSE_USE_VERSION == 25
+#	 define FUSE_MINOR_VERSION 5
+#	 define fuse_mount fuse_mount_compat25
+#    elif FUSE_USE_VERSION == 24 || FUSE_USE_VERSION == 22
+#	 define FUSE_MINOR_VERSION 4
+#	 define fuse_mount fuse_mount_compat22
+#    elif FUSE_USE_VERSION == 21
+#	 define FUSE_MINOR_VERSION 1
+#	 define fuse_mount fuse_mount_compat22
+#    elif FUSE_USE_VERSION == 11
+#	 warning Compatibility with API version 11 is deprecated
+#	 undef FUSE_MAJOR_VERSION
+#	 define FUSE_MAJOR_VERSION 1
+#	 define FUSE_MINOR_VERSION 1
+#	 define fuse_mount fuse_mount_compat1
+#    else
+#	 error Compatibility with API version other than 21, 22, 24, 25 and 11 not supported
+#    endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _FUSE_COMMON_H_ */
diff --git a/fuse/include/fuse_common_compat.h b/fuse/include/fuse_common_compat.h
new file mode 100644
index 0000000..34440ff
--- /dev/null
+++ b/fuse/include/fuse_common_compat.h
@@ -0,0 +1,26 @@
+/*
+  FUSE: Filesystem in Userspace
+  Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
+
+  This program can be distributed under the terms of the GNU LGPLv2.
+  See the file COPYING.LIB.
+*/
+
+/* these definitions provide source compatibility to prior versions.
+   Do not include this file directly! */
+
+struct fuse_file_info_compat {
+	int flags;
+	unsigned long fh;
+	int writepage;
+	unsigned int direct_io : 1;
+	unsigned int keep_cache : 1;
+};
+
+int fuse_mount_compat25(const char *mountpoint, struct fuse_args *args);
+
+int fuse_mount_compat22(const char *mountpoint, const char *opts);
+
+int fuse_mount_compat1(const char *mountpoint, const char *args[]);
+
+void fuse_unmount_compat22(const char *mountpoint);
diff --git a/fuse/include/fuse_compat.h b/fuse/include/fuse_compat.h
new file mode 100644
index 0000000..95b7c78
--- /dev/null
+++ b/fuse/include/fuse_compat.h
@@ -0,0 +1,201 @@
+/*
+  FUSE: Filesystem in Userspace
+  Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
+
+  This program can be distributed under the terms of the GNU LGPLv2.
+  See the file COPYING.LIB.
+*/
+
+/* these definitions provide source compatibility to prior versions.
+   Do not include this file directly! */
+
+struct fuse_operations_compat25 {
+	int (*getattr) (const char *, struct stat *);
+	int (*readlink) (const char *, char *, size_t);
+	int (*getdir) (const char *, fuse_dirh_t, fuse_dirfil_t);
+	int (*mknod) (const char *, mode_t, dev_t);
+	int (*mkdir) (const char *, mode_t);
+	int (*unlink) (const char *);
+	int (*rmdir) (const char *);
+	int (*symlink) (const char *, const char *);
+	int (*rename) (const char *, const char *);
+	int (*link) (const char *, const char *);
+	int (*chmod) (const char *, mode_t);
+	int (*chown) (const char *, uid_t, gid_t);
+	int (*truncate) (const char *, off64_t);
+	int (*utime) (const char *, struct utimbuf *);
+	int (*open) (const char *, struct fuse_file_info *);
+	int (*read) (const char *, char *, size_t, off64_t,
+		     struct fuse_file_info *);
+	int (*write) (const char *, const char *, size_t, off64_t,
+		      struct fuse_file_info *);
+	int (*statfs) (const char *, struct statvfs *);
+	int (*flush) (const char *, struct fuse_file_info *);
+	int (*release) (const char *, struct fuse_file_info *);
+	int (*fsync) (const char *, int, struct fuse_file_info *);
+	int (*setxattr) (const char *, const char *, const char *, size_t, int);
+	int (*getxattr) (const char *, const char *, char *, size_t);
+	int (*listxattr) (const char *, char *, size_t);
+	int (*removexattr) (const char *, const char *);
+	int (*opendir) (const char *, struct fuse_file_info *);
+	int (*readdir) (const char *, void *, fuse_fill_dir_t, off64_t,
+			struct fuse_file_info *);
+	int (*releasedir) (const char *, struct fuse_file_info *);
+	int (*fsyncdir) (const char *, int, struct fuse_file_info *);
+	void *(*init) (void);
+	void (*destroy) (void *);
+	int (*access) (const char *, int);
+	int (*create) (const char *, mode_t, struct fuse_file_info *);
+	int (*ftruncate) (const char *, off64_t, struct fuse_file_info *);
+	int (*fgetattr) (const char *, struct stat *, struct fuse_file_info *);
+};
+
+struct fuse *fuse_new_compat25(int fd, struct fuse_args *args,
+			       const struct fuse_operations_compat25 *op,
+			       size_t op_size);
+
+int fuse_main_real_compat25(int argc, char *argv[],
+			    const struct fuse_operations_compat25 *op,
+			    size_t op_size);
+
+struct fuse *fuse_setup_compat25(int argc, char *argv[],
+				 const struct fuse_operations_compat25 *op,
+				 size_t op_size, char **mountpoint,
+				 int *multithreaded, int *fd);
+
+void fuse_teardown_compat22(struct fuse *fuse, int fd, char *mountpoint);
+
+#ifndef __FreeBSD__
+#include <sys/statfs.h>
+
+struct fuse_operations_compat22 {
+	int (*getattr) (const char *, struct stat *);
+	int (*readlink) (const char *, char *, size_t);
+	int (*getdir) (const char *, fuse_dirh_t, fuse_dirfil_t);
+	int (*mknod) (const char *, mode_t, dev_t);
+	int (*mkdir) (const char *, mode_t);
+	int (*unlink) (const char *);
+	int (*rmdir) (const char *);
+	int (*symlink) (const char *, const char *);
+	int (*rename) (const char *, const char *);
+	int (*link) (const char *, const char *);
+	int (*chmod) (const char *, mode_t);
+	int (*chown) (const char *, uid_t, gid_t);
+	int (*truncate) (const char *, off64_t);
+	int (*utime) (const char *, struct utimbuf *);
+	int (*open) (const char *, struct fuse_file_info_compat *);
+	int (*read) (const char *, char *, size_t, off64_t,
+		     struct fuse_file_info_compat *);
+	int (*write) (const char *, const char *, size_t, off64_t,
+		      struct fuse_file_info_compat *);
+	int (*statfs) (const char *, struct statfs *);
+	int (*flush) (const char *, struct fuse_file_info_compat *);
+	int (*release) (const char *, struct fuse_file_info_compat *);
+	int (*fsync) (const char *, int, struct fuse_file_info_compat *);
+	int (*setxattr) (const char *, const char *, const char *, size_t, int);
+	int (*getxattr) (const char *, const char *, char *, size_t);
+	int (*listxattr) (const char *, char *, size_t);
+	int (*removexattr) (const char *, const char *);
+	int (*opendir) (const char *, struct fuse_file_info_compat *);
+	int (*readdir) (const char *, void *, fuse_fill_dir_t, off64_t,
+			struct fuse_file_info_compat *);
+	int (*releasedir) (const char *, struct fuse_file_info_compat *);
+	int (*fsyncdir) (const char *, int, struct fuse_file_info_compat *);
+	void *(*init) (void);
+	void (*destroy) (void *);
+};
+
+struct fuse *fuse_new_compat22(int fd, const char *opts,
+			       const struct fuse_operations_compat22 *op,
+			       size_t op_size);
+
+struct fuse *fuse_setup_compat22(int argc, char *argv[],
+				 const struct fuse_operations_compat22 *op,
+				 size_t op_size, char **mountpoint,
+				 int *multithreaded, int *fd);
+
+int fuse_main_real_compat22(int argc, char *argv[],
+			    const struct fuse_operations_compat22 *op,
+			    size_t op_size);
+
+typedef int (*fuse_dirfil_t_compat) (fuse_dirh_t h, const char *name, int type);
+struct fuse_operations_compat2 {
+	int (*getattr)	   (const char *, struct stat *);
+	int (*readlink)	   (const char *, char *, size_t);
+	int (*getdir)	   (const char *, fuse_dirh_t, fuse_dirfil_t_compat);
+	int (*mknod)	   (const char *, mode_t, dev_t);
+	int (*mkdir)	   (const char *, mode_t);
+	int (*unlink)	   (const char *);
+	int (*rmdir)	   (const char *);
+	int (*symlink)	   (const char *, const char *);
+	int (*rename)	   (const char *, const char *);
+	int (*link)	   (const char *, const char *);
+	int (*chmod)	   (const char *, mode_t);
+	int (*chown)	   (const char *, uid_t, gid_t);
+	int (*truncate)	   (const char *, off64_t);
+	int (*utime)	   (const char *, struct utimbuf *);
+	int (*open)	   (const char *, int);
+	int (*read)	   (const char *, char *, size_t, off64_t);
+	int (*write)	   (const char *, const char *, size_t, off64_t);
+	int (*statfs)	   (const char *, struct statfs *);
+	int (*flush)	   (const char *);
+	int (*release)	   (const char *, int);
+	int (*fsync)	   (const char *, int);
+	int (*setxattr)	   (const char *, const char *, const char *,
+			    size_t, int);
+	int (*getxattr)	   (const char *, const char *, char *, size_t);
+	int (*listxattr)   (const char *, char *, size_t);
+	int (*removexattr) (const char *, const char *);
+};
+
+int fuse_main_compat2(int argc, char *argv[],
+		      const struct fuse_operations_compat2 *op);
+
+struct fuse *fuse_new_compat2(int fd, const char *opts,
+			      const struct fuse_operations_compat2 *op);
+
+struct fuse *fuse_setup_compat2(int argc, char *argv[],
+				const struct fuse_operations_compat2 *op,
+				char **mountpoint, int *multithreaded, int *fd);
+
+struct fuse_statfs_compat1 {
+	long block_size;
+	long blocks;
+	long blocks_free;
+	long files;
+	long files_free;
+	long namelen;
+};
+
+struct fuse_operations_compat1 {
+	int (*getattr)	(const char *, struct stat *);
+	int (*readlink) (const char *, char *, size_t);
+	int (*getdir)	(const char *, fuse_dirh_t, fuse_dirfil_t_compat);
+	int (*mknod)	(const char *, mode_t, dev_t);
+	int (*mkdir)	(const char *, mode_t);
+	int (*unlink)	(const char *);
+	int (*rmdir)	(const char *);
+	int (*symlink)	(const char *, const char *);
+	int (*rename)	(const char *, const char *);
+	int (*link)	(const char *, const char *);
+	int (*chmod)	(const char *, mode_t);
+	int (*chown)	(const char *, uid_t, gid_t);
+	int (*truncate) (const char *, off64_t);
+	int (*utime)	(const char *, struct utimbuf *);
+	int (*open)	(const char *, int);
+	int (*read)	(const char *, char *, size_t, off64_t);
+	int (*write)	(const char *, const char *, size_t, off64_t);
+	int (*statfs)	(struct fuse_statfs_compat1 *);
+	int (*release)	(const char *, int);
+	int (*fsync)	(const char *, int);
+};
+
+#define FUSE_DEBUG_COMPAT1	 (1 << 1)
+
+struct fuse *fuse_new_compat1(int fd, int flags,
+			      const struct fuse_operations_compat1 *op);
+
+void fuse_main_compat1(int argc, char *argv[],
+		       const struct fuse_operations_compat1 *op);
+
+#endif /* __FreeBSD__ */
diff --git a/fuse/include/fuse_kernel.h b/fuse/include/fuse_kernel.h
new file mode 100644
index 0000000..bd73630
--- /dev/null
+++ b/fuse/include/fuse_kernel.h
@@ -0,0 +1,593 @@
+/*
+    This file defines the kernel interface of FUSE
+    Copyright (C) 2001-2008  Miklos Szeredi <miklos@szeredi.hu>
+
+    This program can be distributed under the terms of the GNU GPL.
+    See the file COPYING.
+
+    This -- and only this -- header file may also be distributed under
+    the terms of the BSD Licence as follows:
+
+    Copyright (C) 2001-2007 Miklos Szeredi. All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+    1. Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+    ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+    ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
+    FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+    OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+    OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+    SUCH DAMAGE.
+*/
+
+/*
+ * This file defines the kernel interface of FUSE
+ *
+ * Protocol changelog:
+ *
+ * 7.9:
+ *  - new fuse_getattr_in input argument of GETATTR
+ *  - add lk_flags in fuse_lk_in
+ *  - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in
+ *  - add blksize field to fuse_attr
+ *  - add file flags field to fuse_read_in and fuse_write_in
+ *
+ * 7.10
+ *  - add nonseekable open flag
+ *
+ * 7.11
+ *  - add IOCTL message
+ *  - add unsolicited notification support
+ *  - add POLL message and NOTIFY_POLL notification
+ *
+ * 7.12
+ *  - add umask flag to input argument of open, mknod and mkdir
+ *  - add notification messages for invalidation of inodes and
+ *    directory entries
+ */
+
+#ifndef _LINUX_FUSE_H
+#define _LINUX_FUSE_H
+
+#include <sys/types.h>
+#define __u64 uint64_t
+#define __s64 int64_t
+#define __u32 uint32_t
+#define __s32 int32_t
+
+/*
+ * Version negotiation:
+ *
+ * Both the kernel and userspace send the version they support in the
+ * INIT request and reply respectively.
+ *
+ * If the major versions match then both shall use the smallest
+ * of the two minor versions for communication.
+ *
+ * If the kernel supports a larger major version, then userspace shall
+ * reply with the major version it supports, ignore the rest of the
+ * INIT message and expect a new INIT message from the kernel with a
+ * matching major version.
+ *
+ * If the library supports a larger major version, then it shall fall
+ * back to the major protocol version sent by the kernel for
+ * communication and reply with that major version (and an arbitrary
+ * supported minor version).
+ */
+
+/** Version number of this interface */
+#define FUSE_KERNEL_VERSION 7
+
+/** Minor version number of this interface */
+#define FUSE_KERNEL_MINOR_VERSION 12
+
+/** The node ID of the root inode */
+#define FUSE_ROOT_ID 1
+
+/* Make sure all structures are padded to 64bit boundary, so 32bit
+   userspace works under 64bit kernels */
+
+struct fuse_attr {
+	__u64	ino;
+	__u64	size;
+	__u64	blocks;
+	__u64	atime;
+	__u64	mtime;
+	__u64	ctime;
+	__u32	atimensec;
+	__u32	mtimensec;
+	__u32	ctimensec;
+	__u32	mode;
+	__u32	nlink;
+	__u32	uid;
+	__u32	gid;
+	__u32	rdev;
+	__u32	blksize;
+	__u32	padding;
+};
+
+struct fuse_kstatfs {
+	__u64	blocks;
+	__u64	bfree;
+	__u64	bavail;
+	__u64	files;
+	__u64	ffree;
+	__u32	bsize;
+	__u32	namelen;
+	__u32	frsize;
+	__u32	padding;
+	__u32	spare[6];
+};
+
+struct fuse_file_lock {
+	__u64	start;
+	__u64	end;
+	__u32	type;
+	__u32	pid; /* tgid */
+};
+
+/**
+ * Bitmasks for fuse_setattr_in.valid
+ */
+#define FATTR_MODE	(1 << 0)
+#define FATTR_UID	(1 << 1)
+#define FATTR_GID	(1 << 2)
+#define FATTR_SIZE	(1 << 3)
+#define FATTR_ATIME	(1 << 4)
+#define FATTR_MTIME	(1 << 5)
+#define FATTR_FH	(1 << 6)
+#define FATTR_ATIME_NOW	(1 << 7)
+#define FATTR_MTIME_NOW	(1 << 8)
+#define FATTR_LOCKOWNER	(1 << 9)
+
+/**
+ * Flags returned by the OPEN request
+ *
+ * FOPEN_DIRECT_IO: bypass page cache for this open file
+ * FOPEN_KEEP_CACHE: don't invalidate the data cache on open
+ * FOPEN_NONSEEKABLE: the file is not seekable
+ */
+#define FOPEN_DIRECT_IO		(1 << 0)
+#define FOPEN_KEEP_CACHE	(1 << 1)
+#define FOPEN_NONSEEKABLE	(1 << 2)
+
+/**
+ * INIT request/reply flags
+ *
+ * FUSE_EXPORT_SUPPORT: filesystem handles lookups of "." and ".."
+ * FUSE_DONT_MASK: don't apply umask to file mode on create operations
+ */
+#define FUSE_ASYNC_READ		(1 << 0)
+#define FUSE_POSIX_LOCKS	(1 << 1)
+#define FUSE_FILE_OPS		(1 << 2)
+#define FUSE_ATOMIC_O_TRUNC	(1 << 3)
+#define FUSE_EXPORT_SUPPORT	(1 << 4)
+#define FUSE_BIG_WRITES		(1 << 5)
+#define FUSE_DONT_MASK		(1 << 6)
+
+/**
+ * CUSE INIT request/reply flags
+ *
+ * CUSE_UNRESTRICTED_IOCTL:  use unrestricted ioctl
+ */
+#define CUSE_UNRESTRICTED_IOCTL	(1 << 0)
+
+/**
+ * Release flags
+ */
+#define FUSE_RELEASE_FLUSH	(1 << 0)
+
+/**
+ * Getattr flags
+ */
+#define FUSE_GETATTR_FH		(1 << 0)
+
+/**
+ * Lock flags
+ */
+#define FUSE_LK_FLOCK		(1 << 0)
+
+/**
+ * WRITE flags
+ *
+ * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed
+ * FUSE_WRITE_LOCKOWNER: lock_owner field is valid
+ */
+#define FUSE_WRITE_CACHE	(1 << 0)
+#define FUSE_WRITE_LOCKOWNER	(1 << 1)
+
+/**
+ * Read flags
+ */
+#define FUSE_READ_LOCKOWNER	(1 << 1)
+
+/**
+ * Ioctl flags
+ *
+ * FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine
+ * FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed
+ * FUSE_IOCTL_RETRY: retry with new iovecs
+ *
+ * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs
+ */
+#define FUSE_IOCTL_COMPAT	(1 << 0)
+#define FUSE_IOCTL_UNRESTRICTED	(1 << 1)
+#define FUSE_IOCTL_RETRY	(1 << 2)
+
+#define FUSE_IOCTL_MAX_IOV	256
+
+/**
+ * Poll flags
+ *
+ * FUSE_POLL_SCHEDULE_NOTIFY: request poll notify
+ */
+#define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0)
+
+enum fuse_opcode {
+	FUSE_LOOKUP	   = 1,
+	FUSE_FORGET	   = 2,  /* no reply */
+	FUSE_GETATTR	   = 3,
+	FUSE_SETATTR	   = 4,
+	FUSE_READLINK	   = 5,
+	FUSE_SYMLINK	   = 6,
+	FUSE_MKNOD	   = 8,
+	FUSE_MKDIR	   = 9,
+	FUSE_UNLINK	   = 10,
+	FUSE_RMDIR	   = 11,
+	FUSE_RENAME	   = 12,
+	FUSE_LINK	   = 13,
+	FUSE_OPEN	   = 14,
+	FUSE_READ	   = 15,
+	FUSE_WRITE	   = 16,
+	FUSE_STATFS	   = 17,
+	FUSE_RELEASE       = 18,
+	FUSE_FSYNC         = 20,
+	FUSE_SETXATTR      = 21,
+	FUSE_GETXATTR      = 22,
+	FUSE_LISTXATTR     = 23,
+	FUSE_REMOVEXATTR   = 24,
+	FUSE_FLUSH         = 25,
+	FUSE_INIT          = 26,
+	FUSE_OPENDIR       = 27,
+	FUSE_READDIR       = 28,
+	FUSE_RELEASEDIR    = 29,
+	FUSE_FSYNCDIR      = 30,
+	FUSE_GETLK         = 31,
+	FUSE_SETLK         = 32,
+	FUSE_SETLKW        = 33,
+	FUSE_ACCESS        = 34,
+	FUSE_CREATE        = 35,
+	FUSE_INTERRUPT     = 36,
+	FUSE_BMAP          = 37,
+	FUSE_DESTROY       = 38,
+	FUSE_IOCTL         = 39,
+	FUSE_POLL          = 40,
+
+	/* CUSE specific operations */
+	CUSE_INIT          = 4096,
+};
+
+enum fuse_notify_code {
+	FUSE_NOTIFY_POLL   = 1,
+	FUSE_NOTIFY_INVAL_INODE = 2,
+	FUSE_NOTIFY_INVAL_ENTRY = 3,
+	FUSE_NOTIFY_CODE_MAX,
+};
+
+/* The read buffer is required to be at least 8k, but may be much larger */
+#define FUSE_MIN_READ_BUFFER 8192
+
+#define FUSE_COMPAT_ENTRY_OUT_SIZE 120
+
+struct fuse_entry_out {
+	__u64	nodeid;		/* Inode ID */
+	__u64	generation;	/* Inode generation: nodeid:gen must
+				   be unique for the fs's lifetime */
+	__u64	entry_valid;	/* Cache timeout for the name */
+	__u64	attr_valid;	/* Cache timeout for the attributes */
+	__u32	entry_valid_nsec;
+	__u32	attr_valid_nsec;
+	struct fuse_attr attr;
+};
+
+struct fuse_forget_in {
+	__u64	nlookup;
+};
+
+struct fuse_getattr_in {
+	__u32	getattr_flags;
+	__u32	dummy;
+	__u64	fh;
+};
+
+#define FUSE_COMPAT_ATTR_OUT_SIZE 96
+
+struct fuse_attr_out {
+	__u64	attr_valid;	/* Cache timeout for the attributes */
+	__u32	attr_valid_nsec;
+	__u32	dummy;
+	struct fuse_attr attr;
+};
+
+#define FUSE_COMPAT_MKNOD_IN_SIZE 8
+
+struct fuse_mknod_in {
+	__u32	mode;
+	__u32	rdev;
+	__u32	umask;
+	__u32	padding;
+};
+
+struct fuse_mkdir_in {
+	__u32	mode;
+	__u32	umask;
+};
+
+struct fuse_rename_in {
+	__u64	newdir;
+};
+
+struct fuse_link_in {
+	__u64	oldnodeid;
+};
+
+struct fuse_setattr_in {
+	__u32	valid;
+	__u32	padding;
+	__u64	fh;
+	__u64	size;
+	__u64	lock_owner;
+	__u64	atime;
+	__u64	mtime;
+	__u64	unused2;
+	__u32	atimensec;
+	__u32	mtimensec;
+	__u32	unused3;
+	__u32	mode;
+	__u32	unused4;
+	__u32	uid;
+	__u32	gid;
+	__u32	unused5;
+};
+
+struct fuse_open_in {
+	__u32	flags;
+	__u32	unused;
+};
+
+struct fuse_create_in {
+	__u32	flags;
+	__u32	mode;
+	__u32	umask;
+	__u32	padding;
+};
+
+struct fuse_open_out {
+	__u64	fh;
+	__u32	open_flags;
+	__u32	padding;
+};
+
+struct fuse_release_in {
+	__u64	fh;
+	__u32	flags;
+	__u32	release_flags;
+	__u64	lock_owner;
+};
+
+struct fuse_flush_in {
+	__u64	fh;
+	__u32	unused;
+	__u32	padding;
+	__u64	lock_owner;
+};
+
+struct fuse_read_in {
+	__u64	fh;
+	__u64	offset;
+	__u32	size;
+	__u32	read_flags;
+	__u64	lock_owner;
+	__u32	flags;
+	__u32	padding;
+};
+
+#define FUSE_COMPAT_WRITE_IN_SIZE 24
+
+struct fuse_write_in {
+	__u64	fh;
+	__u64	offset;
+	__u32	size;
+	__u32	write_flags;
+	__u64	lock_owner;
+	__u32	flags;
+	__u32	padding;
+};
+
+struct fuse_write_out {
+	__u32	size;
+	__u32	padding;
+};
+
+#define FUSE_COMPAT_STATFS_SIZE 48
+
+struct fuse_statfs_out {
+	struct fuse_kstatfs st;
+};
+
+struct fuse_fsync_in {
+	__u64	fh;
+	__u32	fsync_flags;
+	__u32	padding;
+};
+
+struct fuse_setxattr_in {
+	__u32	size;
+	__u32	flags;
+};
+
+struct fuse_getxattr_in {
+	__u32	size;
+	__u32	padding;
+};
+
+struct fuse_getxattr_out {
+	__u32	size;
+	__u32	padding;
+};
+
+struct fuse_lk_in {
+	__u64	fh;
+	__u64	owner;
+	struct fuse_file_lock lk;
+	__u32	lk_flags;
+	__u32	padding;
+};
+
+struct fuse_lk_out {
+	struct fuse_file_lock lk;
+};
+
+struct fuse_access_in {
+	__u32	mask;
+	__u32	padding;
+};
+
+struct fuse_init_in {
+	__u32	major;
+	__u32	minor;
+	__u32	max_readahead;
+	__u32	flags;
+};
+
+struct fuse_init_out {
+	__u32	major;
+	__u32	minor;
+	__u32	max_readahead;
+	__u32	flags;
+	__u32	unused;
+	__u32	max_write;
+};
+
+#define CUSE_INIT_INFO_MAX 4096
+
+struct cuse_init_in {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+};
+
+struct cuse_init_out {
+	__u32	major;
+	__u32	minor;
+	__u32	unused;
+	__u32	flags;
+	__u32	max_read;
+	__u32	max_write;
+	__u32	dev_major;		/* chardev major */
+	__u32	dev_minor;		/* chardev minor */
+	__u32	spare[10];
+};
+
+struct fuse_interrupt_in {
+	__u64	unique;
+};
+
+struct fuse_bmap_in {
+	__u64	block;
+	__u32	blocksize;
+	__u32	padding;
+};
+
+struct fuse_bmap_out {
+	__u64	block;
+};
+
+struct fuse_ioctl_in {
+	__u64	fh;
+	__u32	flags;
+	__u32	cmd;
+	__u64	arg;
+	__u32	in_size;
+	__u32	out_size;
+};
+
+struct fuse_ioctl_out {
+	__s32	result;
+	__u32	flags;
+	__u32	in_iovs;
+	__u32	out_iovs;
+};
+
+struct fuse_poll_in {
+	__u64	fh;
+	__u64	kh;
+	__u32	flags;
+	__u32   padding;
+};
+
+struct fuse_poll_out {
+	__u32	revents;
+	__u32	padding;
+};
+
+struct fuse_notify_poll_wakeup_out {
+	__u64	kh;
+};
+
+struct fuse_in_header {
+	__u32	len;
+	__u32	opcode;
+	__u64	unique;
+	__u64	nodeid;
+	__u32	uid;
+	__u32	gid;
+	__u32	pid;
+	__u32	padding;
+};
+
+struct fuse_out_header {
+	__u32	len;
+	__s32	error;
+	__u64	unique;
+};
+
+struct fuse_dirent {
+	__u64	ino;
+	__u64	off;
+	__u32	namelen;
+	__u32	type;
+	char name[0];
+};
+
+#define FUSE_NAME_OFFSET offsetof(struct fuse_dirent, name)
+#define FUSE_DIRENT_ALIGN(x) (((x) + sizeof(__u64) - 1) & ~(sizeof(__u64) - 1))
+#define FUSE_DIRENT_SIZE(d) \
+	FUSE_DIRENT_ALIGN(FUSE_NAME_OFFSET + (d)->namelen)
+
+struct fuse_notify_inval_inode_out {
+	__u64	ino;
+	__s64	off;
+	__s64	len;
+};
+
+struct fuse_notify_inval_entry_out {
+	__u64	parent;
+	__u32	namelen;
+	__u32	padding;
+};
+
+#endif /* _LINUX_FUSE_H */
diff --git a/fuse/include/fuse_lowlevel.h b/fuse/include/fuse_lowlevel.h
new file mode 100644
index 0000000..f1cfeb9
--- /dev/null
+++ b/fuse/include/fuse_lowlevel.h
@@ -0,0 +1,1577 @@
+/*
+  FUSE: Filesystem in Userspace
+  Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
+
+  This program can be distributed under the terms of the GNU LGPLv2.
+  See the file COPYING.LIB.
+*/
+
+#ifndef _FUSE_LOWLEVEL_H_
+#define _FUSE_LOWLEVEL_H_
+
+/** @file
+ *
+ * Low level API
+ *
+ * IMPORTANT: you should define FUSE_USE_VERSION before including this
+ * header.  To use the newest API define it to 26 (recommended for any
+ * new application), to use the old API define it to 24 (default) or
+ * 25
+ */
+
+#ifndef FUSE_USE_VERSION
+#define FUSE_USE_VERSION 24
+#endif
+
+#include "fuse_common.h"
+
+#include <utime.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/statvfs.h>
+#include <sys/uio.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ----------------------------------------------------------- *
+ * Miscellaneous definitions				       *
+ * ----------------------------------------------------------- */
+
+/** The node ID of the root inode */
+#define FUSE_ROOT_ID 1
+
+/** Inode number type */
+typedef unsigned long fuse_ino_t;
+
+/** Request pointer type */
+typedef struct fuse_req *fuse_req_t;
+
+/**
+ * Session
+ *
+ * This provides hooks for processing requests, and exiting
+ */
+struct fuse_session;
+
+/**
+ * Channel
+ *
+ * A communication channel, providing hooks for sending and receiving
+ * messages
+ */
+struct fuse_chan;
+
+/** Directory entry parameters supplied to fuse_reply_entry() */
+struct fuse_entry_param {
+	/** Unique inode number
+	 *
+	 * In lookup, zero means negative entry (from version 2.5)
+	 * Returning ENOENT also means negative entry, but by setting zero
+	 * ino the kernel may cache negative entries for entry_timeout
+	 * seconds.
+	 */
+	fuse_ino_t ino;
+
+	/** Generation number for this entry.
+	 *
+	 * The ino/generation pair should be unique for the filesystem's
+	 * lifetime. It must be non-zero, otherwise FUSE will treat it as an
+	 * error.
+	 */
+	unsigned long generation;
+
+	/** Inode attributes.
+	 *
+	 * Even if attr_timeout == 0, attr must be correct. For example,
+	 * for open(), FUSE uses attr.st_size from lookup() to determine
+	 * how many bytes to request. If this value is not correct,
+	 * incorrect data will be returned.
+	 */
+	struct stat attr;
+
+	/** Validity timeout (in seconds) for the attributes */
+	double attr_timeout;
+
+	/** Validity timeout (in seconds) for the name */
+	double entry_timeout;
+};
+
+/** Additional context associated with requests */
+struct fuse_ctx {
+	/** User ID of the calling process */
+	uid_t uid;
+
+	/** Group ID of the calling process */
+	gid_t gid;
+
+	/** Thread ID of the calling process */
+	pid_t pid;
+
+	/** Umask of the calling process (introduced in version 2.8) */
+	mode_t umask;
+};
+
+/* 'to_set' flags in setattr */
+#define FUSE_SET_ATTR_MODE	(1 << 0)
+#define FUSE_SET_ATTR_UID	(1 << 1)
+#define FUSE_SET_ATTR_GID	(1 << 2)
+#define FUSE_SET_ATTR_SIZE	(1 << 3)
+#define FUSE_SET_ATTR_ATIME	(1 << 4)
+#define FUSE_SET_ATTR_MTIME	(1 << 5)
+#define FUSE_SET_ATTR_ATIME_NOW	(1 << 7)
+#define FUSE_SET_ATTR_MTIME_NOW	(1 << 8)
+
+/* ----------------------------------------------------------- *
+ * Request methods and replies				       *
+ * ----------------------------------------------------------- */
+
+/**
+ * Low level filesystem operations
+ *
+ * Most of the methods (with the exception of init and destroy)
+ * receive a request handle (fuse_req_t) as their first argument.
+ * This handle must be passed to one of the specified reply functions.
+ *
+ * This may be done inside the method invocation, or after the call
+ * has returned.  The request handle is valid until one of the reply
+ * functions is called.
+ *
+ * Other pointer arguments (name, fuse_file_info, etc) are not valid
+ * after the call has returned, so if they are needed later, their
+ * contents have to be copied.
+ *
+ * The filesystem sometimes needs to handle a return value of -ENOENT
+ * from the reply function, which means, that the request was
+ * interrupted, and the reply discarded.  For example if
+ * fuse_reply_open() return -ENOENT means, that the release method for
+ * this file will not be called.
+ */
+struct fuse_lowlevel_ops {
+	/**
+	 * Initialize filesystem
+	 *
+	 * Called before any other filesystem method
+	 *
+	 * There's no reply to this function
+	 *
+	 * @param userdata the user data passed to fuse_lowlevel_new()
+	 */
+	void (*init) (void *userdata, struct fuse_conn_info *conn);
+
+	/**
+	 * Clean up filesystem
+	 *
+	 * Called on filesystem exit
+	 *
+	 * There's no reply to this function
+	 *
+	 * @param userdata the user data passed to fuse_lowlevel_new()
+	 */
+	void (*destroy) (void *userdata);
+
+	/**
+	 * Look up a directory entry by name and get its attributes.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_entry
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param parent inode number of the parent directory
+	 * @param name the name to look up
+	 */
+	void (*lookup) (fuse_req_t req, fuse_ino_t parent, const char *name);
+
+	/**
+	 * Forget about an inode
+	 *
+	 * The nlookup parameter indicates the number of lookups
+	 * previously performed on this inode.
+	 *
+	 * If the filesystem implements inode lifetimes, it is recommended
+	 * that inodes acquire a single reference on each lookup, and lose
+	 * nlookup references on each forget.
+	 *
+	 * The filesystem may ignore forget calls, if the inodes don't
+	 * need to have a limited lifetime.
+	 *
+	 * On unmount it is not guaranteed, that all referenced inodes
+	 * will receive a forget message.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_none
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param nlookup the number of lookups to forget
+	 */
+	void (*forget) (fuse_req_t req, fuse_ino_t ino, unsigned long nlookup);
+
+	/**
+	 * Get file attributes
+	 *
+	 * Valid replies:
+	 *   fuse_reply_attr
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param fi for future use, currently always NULL
+	 */
+	void (*getattr) (fuse_req_t req, fuse_ino_t ino,
+			 struct fuse_file_info *fi);
+
+	/**
+	 * Set file attributes
+	 *
+	 * In the 'attr' argument only members indicated by the 'to_set'
+	 * bitmask contain valid values.  Other members contain undefined
+	 * values.
+	 *
+	 * If the setattr was invoked from the ftruncate() system call
+	 * under Linux kernel versions 2.6.15 or later, the fi->fh will
+	 * contain the value set by the open method or will be undefined
+	 * if the open method didn't set any value.  Otherwise (not
+	 * ftruncate call, or kernel version earlier than 2.6.15) the fi
+	 * parameter will be NULL.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_attr
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param attr the attributes
+	 * @param to_set bit mask of attributes which should be set
+	 * @param fi file information, or NULL
+	 *
+	 * Changed in version 2.5:
+	 *     file information filled in for ftruncate
+	 */
+	void (*setattr) (fuse_req_t req, fuse_ino_t ino, struct stat *attr,
+			 int to_set, struct fuse_file_info *fi);
+
+	/**
+	 * Read symbolic link
+	 *
+	 * Valid replies:
+	 *   fuse_reply_readlink
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 */
+	void (*readlink) (fuse_req_t req, fuse_ino_t ino);
+
+	/**
+	 * Create file node
+	 *
+	 * Create a regular file, character device, block device, fifo or
+	 * socket node.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_entry
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param parent inode number of the parent directory
+	 * @param name to create
+	 * @param mode file type and mode with which to create the new file
+	 * @param rdev the device number (only valid if created file is a device)
+	 */
+	void (*mknod) (fuse_req_t req, fuse_ino_t parent, const char *name,
+		       mode_t mode, dev_t rdev);
+
+	/**
+	 * Create a directory
+	 *
+	 * Valid replies:
+	 *   fuse_reply_entry
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param parent inode number of the parent directory
+	 * @param name to create
+	 * @param mode with which to create the new file
+	 */
+	void (*mkdir) (fuse_req_t req, fuse_ino_t parent, const char *name,
+		       mode_t mode);
+
+	/**
+	 * Remove a file
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param parent inode number of the parent directory
+	 * @param name to remove
+	 */
+	void (*unlink) (fuse_req_t req, fuse_ino_t parent, const char *name);
+
+	/**
+	 * Remove a directory
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param parent inode number of the parent directory
+	 * @param name to remove
+	 */
+	void (*rmdir) (fuse_req_t req, fuse_ino_t parent, const char *name);
+
+	/**
+	 * Create a symbolic link
+	 *
+	 * Valid replies:
+	 *   fuse_reply_entry
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param link the contents of the symbolic link
+	 * @param parent inode number of the parent directory
+	 * @param name to create
+	 */
+	void (*symlink) (fuse_req_t req, const char *link, fuse_ino_t parent,
+			 const char *name);
+
+	/** Rename a file
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param parent inode number of the old parent directory
+	 * @param name old name
+	 * @param newparent inode number of the new parent directory
+	 * @param newname new name
+	 */
+	void (*rename) (fuse_req_t req, fuse_ino_t parent, const char *name,
+			fuse_ino_t newparent, const char *newname);
+
+	/**
+	 * Create a hard link
+	 *
+	 * Valid replies:
+	 *   fuse_reply_entry
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the old inode number
+	 * @param newparent inode number of the new parent directory
+	 * @param newname new name to create
+	 */
+	void (*link) (fuse_req_t req, fuse_ino_t ino, fuse_ino_t newparent,
+		      const char *newname);
+
+	/**
+	 * Open a file
+	 *
+	 * Open flags (with the exception of O_CREAT, O_EXCL, O_NOCTTY and
+	 * O_TRUNC) are available in fi->flags.
+	 *
+	 * Filesystem may store an arbitrary file handle (pointer, index,
+	 * etc) in fi->fh, and use this in other all other file operations
+	 * (read, write, flush, release, fsync).
+	 *
+	 * Filesystem may also implement stateless file I/O and not store
+	 * anything in fi->fh.
+	 *
+	 * There are also some flags (direct_io, keep_cache) which the
+	 * filesystem may set in fi, to change the way the file is opened.
+	 * See fuse_file_info structure in <fuse_common.h> for more details.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_open
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param fi file information
+	 */
+	void (*open) (fuse_req_t req, fuse_ino_t ino,
+		      struct fuse_file_info *fi);
+
+	/**
+	 * Read data
+	 *
+	 * Read should send exactly the number of bytes requested except
+	 * on EOF or error, otherwise the rest of the data will be
+	 * substituted with zeroes.  An exception to this is when the file
+	 * has been opened in 'direct_io' mode, in which case the return
+	 * value of the read system call will reflect the return value of
+	 * this operation.
+	 *
+	 * fi->fh will contain the value set by the open method, or will
+	 * be undefined if the open method didn't set any value.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_buf
+	 *   fuse_reply_iov
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param size number of bytes to read
+	 * @param off offset to read from
+	 * @param fi file information
+	 */
+	void (*read) (fuse_req_t req, fuse_ino_t ino, size_t size, off64_t off,
+		      struct fuse_file_info *fi);
+
+	/**
+	 * Write data
+	 *
+	 * Write should return exactly the number of bytes requested
+	 * except on error.  An exception to this is when the file has
+	 * been opened in 'direct_io' mode, in which case the return value
+	 * of the write system call will reflect the return value of this
+	 * operation.
+	 *
+	 * fi->fh will contain the value set by the open method, or will
+	 * be undefined if the open method didn't set any value.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_write
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param buf data to write
+	 * @param size number of bytes to write
+	 * @param off offset to write to
+	 * @param fi file information
+	 */
+	void (*write) (fuse_req_t req, fuse_ino_t ino, const char *buf,
+		       size_t size, off64_t off, struct fuse_file_info *fi);
+
+	/**
+	 * Flush method
+	 *
+	 * This is called on each close() of the opened file.
+	 *
+	 * Since file descriptors can be duplicated (dup, dup2, fork), for
+	 * one open call there may be many flush calls.
+	 *
+	 * Filesystems shouldn't assume that flush will always be called
+	 * after some writes, or that if will be called at all.
+	 *
+	 * fi->fh will contain the value set by the open method, or will
+	 * be undefined if the open method didn't set any value.
+	 *
+	 * NOTE: the name of the method is misleading, since (unlike
+	 * fsync) the filesystem is not forced to flush pending writes.
+	 * One reason to flush data, is if the filesystem wants to return
+	 * write errors.
+	 *
+	 * If the filesystem supports file locking operations (setlk,
+	 * getlk) it should remove all locks belonging to 'fi->owner'.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param fi file information
+	 */
+	void (*flush) (fuse_req_t req, fuse_ino_t ino,
+		       struct fuse_file_info *fi);
+
+	/**
+	 * Release an open file
+	 *
+	 * Release is called when there are no more references to an open
+	 * file: all file descriptors are closed and all memory mappings
+	 * are unmapped.
+	 *
+	 * For every open call there will be exactly one release call.
+	 *
+	 * The filesystem may reply with an error, but error values are
+	 * not returned to close() or munmap() which triggered the
+	 * release.
+	 *
+	 * fi->fh will contain the value set by the open method, or will
+	 * be undefined if the open method didn't set any value.
+	 * fi->flags will contain the same flags as for open.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param fi file information
+	 */
+	void (*release) (fuse_req_t req, fuse_ino_t ino,
+			 struct fuse_file_info *fi);
+
+	/**
+	 * Synchronize file contents
+	 *
+	 * If the datasync parameter is non-zero, then only the user data
+	 * should be flushed, not the meta data.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param datasync flag indicating if only data should be flushed
+	 * @param fi file information
+	 */
+	void (*fsync) (fuse_req_t req, fuse_ino_t ino, int datasync,
+		       struct fuse_file_info *fi);
+
+	/**
+	 * Open a directory
+	 *
+	 * Filesystem may store an arbitrary file handle (pointer, index,
+	 * etc) in fi->fh, and use this in other all other directory
+	 * stream operations (readdir, releasedir, fsyncdir).
+	 *
+	 * Filesystem may also implement stateless directory I/O and not
+	 * store anything in fi->fh, though that makes it impossible to
+	 * implement standard conforming directory stream operations in
+	 * case the contents of the directory can change between opendir
+	 * and releasedir.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_open
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param fi file information
+	 */
+	void (*opendir) (fuse_req_t req, fuse_ino_t ino,
+			 struct fuse_file_info *fi);
+
+	/**
+	 * Read directory
+	 *
+	 * Send a buffer filled using fuse_add_direntry(), with size not
+	 * exceeding the requested size.  Send an empty buffer on end of
+	 * stream.
+	 *
+	 * fi->fh will contain the value set by the opendir method, or
+	 * will be undefined if the opendir method didn't set any value.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_buf
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param size maximum number of bytes to send
+	 * @param off offset to continue reading the directory stream
+	 * @param fi file information
+	 */
+	void (*readdir) (fuse_req_t req, fuse_ino_t ino, size_t size, off64_t off,
+			 struct fuse_file_info *fi);
+
+	/**
+	 * Release an open directory
+	 *
+	 * For every opendir call there will be exactly one releasedir
+	 * call.
+	 *
+	 * fi->fh will contain the value set by the opendir method, or
+	 * will be undefined if the opendir method didn't set any value.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param fi file information
+	 */
+	void (*releasedir) (fuse_req_t req, fuse_ino_t ino,
+			    struct fuse_file_info *fi);
+
+	/**
+	 * Synchronize directory contents
+	 *
+	 * If the datasync parameter is non-zero, then only the directory
+	 * contents should be flushed, not the meta data.
+	 *
+	 * fi->fh will contain the value set by the opendir method, or
+	 * will be undefined if the opendir method didn't set any value.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param datasync flag indicating if only data should be flushed
+	 * @param fi file information
+	 */
+	void (*fsyncdir) (fuse_req_t req, fuse_ino_t ino, int datasync,
+			  struct fuse_file_info *fi);
+
+	/**
+	 * Get file system statistics
+	 *
+	 * Valid replies:
+	 *   fuse_reply_statfs
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number, zero means "undefined"
+	 */
+	void (*statfs) (fuse_req_t req, fuse_ino_t ino);
+
+	/**
+	 * Set an extended attribute
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 */
+	void (*setxattr) (fuse_req_t req, fuse_ino_t ino, const char *name,
+			  const char *value, size_t size, int flags);
+
+	/**
+	 * Get an extended attribute
+	 *
+	 * If size is zero, the size of the value should be sent with
+	 * fuse_reply_xattr.
+	 *
+	 * If the size is non-zero, and the value fits in the buffer, the
+	 * value should be sent with fuse_reply_buf.
+	 *
+	 * If the size is too small for the value, the ERANGE error should
+	 * be sent.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_buf
+	 *   fuse_reply_xattr
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param name of the extended attribute
+	 * @param size maximum size of the value to send
+	 */
+	void (*getxattr) (fuse_req_t req, fuse_ino_t ino, const char *name,
+			  size_t size);
+
+	/**
+	 * List extended attribute names
+	 *
+	 * If size is zero, the total size of the attribute list should be
+	 * sent with fuse_reply_xattr.
+	 *
+	 * If the size is non-zero, and the null character separated
+	 * attribute list fits in the buffer, the list should be sent with
+	 * fuse_reply_buf.
+	 *
+	 * If the size is too small for the list, the ERANGE error should
+	 * be sent.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_buf
+	 *   fuse_reply_xattr
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param size maximum size of the list to send
+	 */
+	void (*listxattr) (fuse_req_t req, fuse_ino_t ino, size_t size);
+
+	/**
+	 * Remove an extended attribute
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param name of the extended attribute
+	 */
+	void (*removexattr) (fuse_req_t req, fuse_ino_t ino, const char *name);
+
+	/**
+	 * Check file access permissions
+	 *
+	 * This will be called for the access() system call.  If the
+	 * 'default_permissions' mount option is given, this method is not
+	 * called.
+	 *
+	 * This method is not called under Linux kernel versions 2.4.x
+	 *
+	 * Introduced in version 2.5
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param mask requested access mode
+	 */
+	void (*access) (fuse_req_t req, fuse_ino_t ino, int mask);
+
+	/**
+	 * Create and open a file
+	 *
+	 * If the file does not exist, first create it with the specified
+	 * mode, and then open it.
+	 *
+	 * Open flags (with the exception of O_NOCTTY) are available in
+	 * fi->flags.
+	 *
+	 * Filesystem may store an arbitrary file handle (pointer, index,
+	 * etc) in fi->fh, and use this in other all other file operations
+	 * (read, write, flush, release, fsync).
+	 *
+	 * There are also some flags (direct_io, keep_cache) which the
+	 * filesystem may set in fi, to change the way the file is opened.
+	 * See fuse_file_info structure in <fuse_common.h> for more details.
+	 *
+	 * If this method is not implemented or under Linux kernel
+	 * versions earlier than 2.6.15, the mknod() and open() methods
+	 * will be called instead.
+	 *
+	 * Introduced in version 2.5
+	 *
+	 * Valid replies:
+	 *   fuse_reply_create
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param parent inode number of the parent directory
+	 * @param name to create
+	 * @param mode file type and mode with which to create the new file
+	 * @param fi file information
+	 */
+	void (*create) (fuse_req_t req, fuse_ino_t parent, const char *name,
+			mode_t mode, struct fuse_file_info *fi);
+
+	/**
+	 * Test for a POSIX file lock
+	 *
+	 * Introduced in version 2.6
+	 *
+	 * Valid replies:
+	 *   fuse_reply_lock
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param fi file information
+	 * @param lock the region/type to test
+	 */
+	void (*getlk) (fuse_req_t req, fuse_ino_t ino,
+		       struct fuse_file_info *fi, struct flock *lock);
+
+	/**
+	 * Acquire, modify or release a POSIX file lock
+	 *
+	 * For POSIX threads (NPTL) there's a 1-1 relation between pid and
+	 * owner, but otherwise this is not always the case.  For checking
+	 * lock ownership, 'fi->owner' must be used.  The l_pid field in
+	 * 'struct flock' should only be used to fill in this field in
+	 * getlk().
+	 *
+	 * Note: if the locking methods are not implemented, the kernel
+	 * will still allow file locking to work locally.  Hence these are
+	 * only interesting for network filesystems and similar.
+	 *
+	 * Introduced in version 2.6
+	 *
+	 * Valid replies:
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param fi file information
+	 * @param lock the region/type to test
+	 * @param sleep locking operation may sleep
+	 */
+	void (*setlk) (fuse_req_t req, fuse_ino_t ino,
+		       struct fuse_file_info *fi,
+		       struct flock *lock, int sleep);
+
+	/**
+	 * Map block index within file to block index within device
+	 *
+	 * Note: This makes sense only for block device backed filesystems
+	 * mounted with the 'blkdev' option
+	 *
+	 * Introduced in version 2.6
+	 *
+	 * Valid replies:
+	 *   fuse_reply_bmap
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param blocksize unit of block index
+	 * @param idx block index within file
+	 */
+	void (*bmap) (fuse_req_t req, fuse_ino_t ino, size_t blocksize,
+		      uint64_t idx);
+
+	/**
+	 * Ioctl
+	 *
+	 * Note: For unrestricted ioctls (not allowed for FUSE
+	 * servers), data in and out areas can be discovered by giving
+	 * iovs and setting FUSE_IOCTL_RETRY in @flags.  For
+	 * restricted ioctls, kernel prepares in/out data area
+	 * according to the information encoded in cmd.
+	 *
+	 * Introduced in version 2.8
+	 *
+	 * Valid replies:
+	 *   fuse_reply_ioctl_retry
+	 *   fuse_reply_ioctl
+	 *   fuse_reply_ioctl_iov
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param cmd ioctl command
+	 * @param arg ioctl argument
+	 * @param fi file information
+	 * @param flags for FUSE_IOCTL_* flags
+	 * @param in_buf data fetched from the caller
+	 * @param in_bufsz number of fetched bytes
+	 * @param out_bufsz maximum size of output data
+	 */
+	void (*ioctl) (fuse_req_t req, fuse_ino_t ino, int cmd, void *arg,
+		       struct fuse_file_info *fi, unsigned flags,
+		       const void *in_buf, size_t in_bufsz, size_t out_bufsz);
+
+	/**
+	 * Poll for IO readiness
+	 *
+	 * Introduced in version 2.8
+	 *
+	 * Note: If ph is non-NULL, the client should notify
+	 * when IO readiness events occur by calling
+	 * fuse_lowelevel_notify_poll() with the specified ph.
+	 *
+	 * Regardless of the number of times poll with a non-NULL ph
+	 * is received, single notification is enough to clear all.
+	 * Notifying more times incurs overhead but doesn't harm
+	 * correctness.
+	 *
+	 * The callee is responsible for destroying ph with
+	 * fuse_pollhandle_destroy() when no longer in use.
+	 *
+	 * Valid replies:
+	 *   fuse_reply_poll
+	 *   fuse_reply_err
+	 *
+	 * @param req request handle
+	 * @param ino the inode number
+	 * @param fi file information
+	 * @param ph poll handle to be used for notification
+	 */
+	void (*poll) (fuse_req_t req, fuse_ino_t ino, struct fuse_file_info *fi,
+		      struct fuse_pollhandle *ph);
+};
+
+/**
+ * Reply with an error code or success
+ *
+ * Possible requests:
+ *   all except forget
+ *
+ * unlink, rmdir, rename, flush, release, fsync, fsyncdir, setxattr,
+ * removexattr and setlk may send a zero code
+ *
+ * @param req request handle
+ * @param err the positive error value, or zero for success
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_err(fuse_req_t req, int err);
+
+/**
+ * Don't send reply
+ *
+ * Possible requests:
+ *   forget
+ *
+ * @param req request handle
+ */
+void fuse_reply_none(fuse_req_t req);
+
+/**
+ * Reply with a directory entry
+ *
+ * Possible requests:
+ *   lookup, mknod, mkdir, symlink, link
+ *
+ * @param req request handle
+ * @param e the entry parameters
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_entry(fuse_req_t req, const struct fuse_entry_param *e);
+
+/**
+ * Reply with a directory entry and open parameters
+ *
+ * currently the following members of 'fi' are used:
+ *   fh, direct_io, keep_cache
+ *
+ * Possible requests:
+ *   create
+ *
+ * @param req request handle
+ * @param e the entry parameters
+ * @param fi file information
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_create(fuse_req_t req, const struct fuse_entry_param *e,
+		      const struct fuse_file_info *fi);
+
+/**
+ * Reply with attributes
+ *
+ * Possible requests:
+ *   getattr, setattr
+ *
+ * @param req request handle
+ * @param attr the attributes
+ * @param attr_timeout	validity timeout (in seconds) for the attributes
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_attr(fuse_req_t req, const struct stat *attr,
+		    double attr_timeout);
+
+/**
+ * Reply with the contents of a symbolic link
+ *
+ * Possible requests:
+ *   readlink
+ *
+ * @param req request handle
+ * @param link symbolic link contents
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_readlink(fuse_req_t req, const char *link);
+
+/**
+ * Reply with open parameters
+ *
+ * currently the following members of 'fi' are used:
+ *   fh, direct_io, keep_cache
+ *
+ * Possible requests:
+ *   open, opendir
+ *
+ * @param req request handle
+ * @param fi file information
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_open(fuse_req_t req, const struct fuse_file_info *fi);
+
+/**
+ * Reply with number of bytes written
+ *
+ * Possible requests:
+ *   write
+ *
+ * @param req request handle
+ * @param count the number of bytes written
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_write(fuse_req_t req, size_t count);
+
+/**
+ * Reply with data
+ *
+ * Possible requests:
+ *   read, readdir, getxattr, listxattr
+ *
+ * @param req request handle
+ * @param buf buffer containing data
+ * @param size the size of data in bytes
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_buf(fuse_req_t req, const char *buf, size_t size);
+
+/**
+ * Reply with data vector
+ *
+ * Possible requests:
+ *   read, readdir, getxattr, listxattr
+ *
+ * @param req request handle
+ * @param iov the vector containing the data
+ * @param count the size of vector
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_iov(fuse_req_t req, const struct iovec *iov, int count);
+
+/**
+ * Reply with filesystem statistics
+ *
+ * Possible requests:
+ *   statfs
+ *
+ * @param req request handle
+ * @param stbuf filesystem statistics
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_statfs(fuse_req_t req, const struct statvfs *stbuf);
+
+/**
+ * Reply with needed buffer size
+ *
+ * Possible requests:
+ *   getxattr, listxattr
+ *
+ * @param req request handle
+ * @param count the buffer size needed in bytes
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_xattr(fuse_req_t req, size_t count);
+
+/**
+ * Reply with file lock information
+ *
+ * Possible requests:
+ *   getlk
+ *
+ * @param req request handle
+ * @param lock the lock information
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_lock(fuse_req_t req, struct flock *lock);
+
+/**
+ * Reply with block index
+ *
+ * Possible requests:
+ *   bmap
+ *
+ * @param req request handle
+ * @param idx block index within device
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_bmap(fuse_req_t req, uint64_t idx);
+
+/* ----------------------------------------------------------- *
+ * Filling a buffer in readdir				       *
+ * ----------------------------------------------------------- */
+
+/**
+ * Add a directory entry to the buffer
+ *
+ * Buffer needs to be large enough to hold the entry.  If it's not,
+ * then the entry is not filled in but the size of the entry is still
+ * returned.  The caller can check this by comparing the bufsize
+ * parameter with the returned entry size.  If the entry size is
+ * larger than the buffer size, the operation failed.
+ *
+ * From the 'stbuf' argument the st_ino field and bits 12-15 of the
+ * st_mode field are used.  The other fields are ignored.
+ *
+ * Note: offsets do not necessarily represent physical offsets, and
+ * could be any marker, that enables the implementation to find a
+ * specific point in the directory stream.
+ *
+ * @param req request handle
+ * @param buf the point where the new entry will be added to the buffer
+ * @param bufsize remaining size of the buffer
+ * @param name the name of the entry
+ * @param stbuf the file attributes
+ * @param off the offset of the next entry
+ * @return the space needed for the entry
+ */
+size_t fuse_add_direntry(fuse_req_t req, char *buf, size_t bufsize,
+			 const char *name, const struct stat *stbuf,
+			 off64_t off);
+
+/**
+ * Reply to ask for data fetch and output buffer preparation.  ioctl
+ * will be retried with the specified input data fetched and output
+ * buffer prepared.
+ *
+ * Possible requests:
+ *   ioctl
+ *
+ * @param req request handle
+ * @param in_iov iovec specifying data to fetch from the caller
+ * @param in_count number of entries in in_iov
+ * @param out_iov iovec specifying addresses to write output to
+ * @param out_count number of entries in out_iov
+ * @return zero for success, -errno for failure to send reply
+ */
+int fuse_reply_ioctl_retry(fuse_req_t req,
+			   const struct iovec *in_iov, size_t in_count,
+			   const struct iovec *out_iov, size_t out_count);
+
+/**
+ * Reply to finish ioctl
+ *
+ * Possible requests:
+ *   ioctl
+ *
+ * @param req request handle
+ * @param result result to be passed to the caller
+ * @param buf buffer containing output data
+ * @param size length of output data
+ */
+int fuse_reply_ioctl(fuse_req_t req, int result, const void *buf, size_t size);
+
+/**
+ * Reply to finish ioctl with iov buffer
+ *
+ * Possible requests:
+ *   ioctl
+ *
+ * @param req request handle
+ * @param result result to be passed to the caller
+ * @param iov the vector containing the data
+ * @param count the size of vector
+ */
+int fuse_reply_ioctl_iov(fuse_req_t req, int result, const struct iovec *iov,
+			 int count);
+
+/**
+ * Reply with poll result event mask
+ *
+ * @param req request handle
+ * @param revents poll result event mask
+ */
+int fuse_reply_poll(fuse_req_t req, unsigned revents);
+
+/* ----------------------------------------------------------- *
+ * Notification						       *
+ * ----------------------------------------------------------- */
+
+/**
+ * Notify IO readiness event
+ *
+ * For more information, please read comment for poll operation.
+ *
+ * @param ph poll handle to notify IO readiness event for
+ */
+int fuse_lowlevel_notify_poll(struct fuse_pollhandle *ph);
+
+/**
+ * Notify to invalidate cache for an inode
+ *
+ * @param ch the channel through which to send the invalidation
+ * @param ino the inode number
+ * @param off the offset in the inode where to start invalidating
+ *            or negative to invalidate attributes only
+ * @param len the amount of cache to invalidate or 0 for all
+ * @return zero for success, -errno for failure
+ */
+int fuse_lowlevel_notify_inval_inode(struct fuse_chan *ch, fuse_ino_t ino,
+                                     off64_t off, off64_t len);
+
+/**
+ * Notify to invalidate parent attributes and the dentry matching
+ * parent/name
+ *
+ * @param ch the channel through which to send the invalidation
+ * @param parent inode number
+ * @param name file name
+ * @param namelen strlen() of file name
+ * @return zero for success, -errno for failure
+ */
+int fuse_lowlevel_notify_inval_entry(struct fuse_chan *ch, fuse_ino_t parent,
+                                     const char *name, size_t namelen);
+
+/* ----------------------------------------------------------- *
+ * Utility functions					       *
+ * ----------------------------------------------------------- */
+
+/**
+ * Get the userdata from the request
+ *
+ * @param req request handle
+ * @return the user data passed to fuse_lowlevel_new()
+ */
+void *fuse_req_userdata(fuse_req_t req);
+
+/**
+ * Get the context from the request
+ *
+ * The pointer returned by this function will only be valid for the
+ * request's lifetime
+ *
+ * @param req request handle
+ * @return the context structure
+ */
+const struct fuse_ctx *fuse_req_ctx(fuse_req_t req);
+
+/**
+ * Get the current supplementary group IDs for the specified request
+ *
+ * Similar to the getgroups(2) system call, except the return value is
+ * always the total number of group IDs, even if it is larger than the
+ * specified size.
+ *
+ * The current fuse kernel module in linux (as of 2.6.30) doesn't pass
+ * the group list to userspace, hence this function needs to parse
+ * "/proc/$TID/task/$TID/status" to get the group IDs.
+ *
+ * This feature may not be supported on all operating systems.  In
+ * such a case this function will return -ENOSYS.
+ *
+ * @param req request handle
+ * @param size size of given array
+ * @param list array of group IDs to be filled in
+ * @return the total number of supplementary group IDs or -errno on failure
+ */
+int fuse_req_getgroups(fuse_req_t req, int size, gid_t list[]);
+
+/**
+ * Callback function for an interrupt
+ *
+ * @param req interrupted request
+ * @param data user data
+ */
+typedef void (*fuse_interrupt_func_t)(fuse_req_t req, void *data);
+
+/**
+ * Register/unregister callback for an interrupt
+ *
+ * If an interrupt has already happened, then the callback function is
+ * called from within this function, hence it's not possible for
+ * interrupts to be lost.
+ *
+ * @param req request handle
+ * @param func the callback function or NULL for unregister
+ * @param data user data passed to the callback function
+ */
+void fuse_req_interrupt_func(fuse_req_t req, fuse_interrupt_func_t func,
+			     void *data);
+
+/**
+ * Check if a request has already been interrupted
+ *
+ * @param req request handle
+ * @return 1 if the request has been interrupted, 0 otherwise
+ */
+int fuse_req_interrupted(fuse_req_t req);
+
+/* ----------------------------------------------------------- *
+ * Filesystem setup					       *
+ * ----------------------------------------------------------- */
+
+/* Deprecated, don't use */
+int fuse_lowlevel_is_lib_option(const char *opt);
+
+/**
+ * Create a low level session
+ *
+ * @param args argument vector
+ * @param op the low level filesystem operations
+ * @param op_size sizeof(struct fuse_lowlevel_ops)
+ * @param userdata user data
+ * @return the created session object, or NULL on failure
+ */
+struct fuse_session *fuse_lowlevel_new(struct fuse_args *args,
+				       const struct fuse_lowlevel_ops *op,
+				       size_t op_size, void *userdata);
+
+/* ----------------------------------------------------------- *
+ * Session interface					       *
+ * ----------------------------------------------------------- */
+
+/**
+ * Session operations
+ *
+ * This is used in session creation
+ */
+struct fuse_session_ops {
+	/**
+	 * Hook to process a request (mandatory)
+	 *
+	 * @param data user data passed to fuse_session_new()
+	 * @param buf buffer containing the raw request
+	 * @param len request length
+	 * @param ch channel on which the request was received
+	 */
+	void (*process) (void *data, const char *buf, size_t len,
+			 struct fuse_chan *ch);
+
+	/**
+	 * Hook for session exit and reset (optional)
+	 *
+	 * @param data user data passed to fuse_session_new()
+	 * @param val exited status (1 - exited, 0 - not exited)
+	 */
+	void (*exit) (void *data, int val);
+
+	/**
+	 * Hook for querying the current exited status (optional)
+	 *
+	 * @param data user data passed to fuse_session_new()
+	 * @return 1 if exited, 0 if not exited
+	 */
+	int (*exited) (void *data);
+
+	/**
+	 * Hook for cleaning up the channel on destroy (optional)
+	 *
+	 * @param data user data passed to fuse_session_new()
+	 */
+	void (*destroy) (void *data);
+};
+
+/**
+ * Create a new session
+ *
+ * @param op session operations
+ * @param data user data
+ * @return new session object, or NULL on failure
+ */
+struct fuse_session *fuse_session_new(struct fuse_session_ops *op, void *data);
+
+/**
+ * Assign a channel to a session
+ *
+ * Note: currently only a single channel may be assigned.  This may
+ * change in the future
+ *
+ * If a session is destroyed, the assigned channel is also destroyed
+ *
+ * @param se the session
+ * @param ch the channel
+ */
+void fuse_session_add_chan(struct fuse_session *se, struct fuse_chan *ch);
+
+/**
+ * Remove a channel from a session
+ *
+ * If the channel is not assigned to a session, then this is a no-op
+ *
+ * @param ch the channel to remove
+ */
+void fuse_session_remove_chan(struct fuse_chan *ch);
+
+/**
+ * Iterate over the channels assigned to a session
+ *
+ * The iterating function needs to start with a NULL channel, and
+ * after that needs to pass the previously returned channel to the
+ * function.
+ *
+ * @param se the session
+ * @param ch the previous channel, or NULL
+ * @return the next channel, or NULL if no more channels exist
+ */
+struct fuse_chan *fuse_session_next_chan(struct fuse_session *se,
+					 struct fuse_chan *ch);
+
+/**
+ * Process a raw request
+ *
+ * @param se the session
+ * @param buf buffer containing the raw request
+ * @param len request length
+ * @param ch channel on which the request was received
+ */
+void fuse_session_process(struct fuse_session *se, const char *buf, size_t len,
+			  struct fuse_chan *ch);
+
+/**
+ * Destroy a session
+ *
+ * @param se the session
+ */
+void fuse_session_destroy(struct fuse_session *se);
+
+/**
+ * Exit a session
+ *
+ * @param se the session
+ */
+void fuse_session_exit(struct fuse_session *se);
+
+/**
+ * Reset the exited status of a session
+ *
+ * @param se the session
+ */
+void fuse_session_reset(struct fuse_session *se);
+
+/**
+ * Query the exited status of a session
+ *
+ * @param se the session
+ * @return 1 if exited, 0 if not exited
+ */
+int fuse_session_exited(struct fuse_session *se);
+
+/**
+ * Get the user data provided to the session
+ *
+ * @param se the session
+ * @return the user data
+ */
+void *fuse_session_data(struct fuse_session *se);
+
+/**
+ * Enter a single threaded event loop
+ *
+ * @param se the session
+ * @return 0 on success, -1 on error
+ */
+int fuse_session_loop(struct fuse_session *se);
+
+/**
+ * Enter a multi-threaded event loop
+ *
+ * @param se the session
+ * @return 0 on success, -1 on error
+ */
+int fuse_session_loop_mt(struct fuse_session *se);
+
+/* ----------------------------------------------------------- *
+ * Channel interface					       *
+ * ----------------------------------------------------------- */
+
+/**
+ * Channel operations
+ *
+ * This is used in channel creation
+ */
+struct fuse_chan_ops {
+	/**
+	 * Hook for receiving a raw request
+	 *
+	 * @param ch pointer to the channel
+	 * @param buf the buffer to store the request in
+	 * @param size the size of the buffer
+	 * @return the actual size of the raw request, or -1 on error
+	 */
+	int (*receive)(struct fuse_chan **chp, char *buf, size_t size);
+
+	/**
+	 * Hook for sending a raw reply
+	 *
+	 * A return value of -ENOENT means, that the request was
+	 * interrupted, and the reply was discarded
+	 *
+	 * @param ch the channel
+	 * @param iov vector of blocks
+	 * @param count the number of blocks in vector
+	 * @return zero on success, -errno on failure
+	 */
+	int (*send)(struct fuse_chan *ch, const struct iovec iov[],
+		    size_t count);
+
+	/**
+	 * Destroy the channel
+	 *
+	 * @param ch the channel
+	 */
+	void (*destroy)(struct fuse_chan *ch);
+};
+
+/**
+ * Create a new channel
+ *
+ * @param op channel operations
+ * @param fd file descriptor of the channel
+ * @param bufsize the minimal receive buffer size
+ * @param data user data
+ * @return the new channel object, or NULL on failure
+ */
+struct fuse_chan *fuse_chan_new(struct fuse_chan_ops *op, int fd,
+				size_t bufsize, void *data);
+
+/**
+ * Query the file descriptor of the channel
+ *
+ * @param ch the channel
+ * @return the file descriptor passed to fuse_chan_new()
+ */
+int fuse_chan_fd(struct fuse_chan *ch);
+
+/**
+ * Query the minimal receive buffer size
+ *
+ * @param ch the channel
+ * @return the buffer size passed to fuse_chan_new()
+ */
+size_t fuse_chan_bufsize(struct fuse_chan *ch);
+
+/**
+ * Query the user data
+ *
+ * @param ch the channel
+ * @return the user data passed to fuse_chan_new()
+ */
+void *fuse_chan_data(struct fuse_chan *ch);
+
+/**
+ * Query the session to which this channel is assigned
+ *
+ * @param ch the channel
+ * @return the session, or NULL if the channel is not assigned
+ */
+struct fuse_session *fuse_chan_session(struct fuse_chan *ch);
+
+/**
+ * Receive a raw request
+ *
+ * A return value of -ENODEV means, that the filesystem was unmounted
+ *
+ * @param ch pointer to the channel
+ * @param buf the buffer to store the request in
+ * @param size the size of the buffer
+ * @return the actual size of the raw request, or -errno on error
+ */
+int fuse_chan_recv(struct fuse_chan **ch, char *buf, size_t size);
+
+/**
+ * Send a raw reply
+ *
+ * A return value of -ENOENT means, that the request was
+ * interrupted, and the reply was discarded
+ *
+ * @param ch the channel
+ * @param iov vector of blocks
+ * @param count the number of blocks in vector
+ * @return zero on success, -errno on failure
+ */
+int fuse_chan_send(struct fuse_chan *ch, const struct iovec iov[],
+		   size_t count);
+
+/**
+ * Destroy a channel
+ *
+ * @param ch the channel
+ */
+void fuse_chan_destroy(struct fuse_chan *ch);
+
+/* ----------------------------------------------------------- *
+ * Compatibility stuff					       *
+ * ----------------------------------------------------------- */
+
+#if FUSE_USE_VERSION < 26
+#  include "fuse_lowlevel_compat.h"
+#  define fuse_chan_ops fuse_chan_ops_compat24
+#  define fuse_chan_new fuse_chan_new_compat24
+#  if FUSE_USE_VERSION == 25
+#    define fuse_lowlevel_ops fuse_lowlevel_ops_compat25
+#    define fuse_lowlevel_new fuse_lowlevel_new_compat25
+#  elif FUSE_USE_VERSION == 24
+#    define fuse_lowlevel_ops fuse_lowlevel_ops_compat
+#    define fuse_lowlevel_new fuse_lowlevel_new_compat
+#    define fuse_file_info fuse_file_info_compat
+#    define fuse_reply_statfs fuse_reply_statfs_compat
+#    define fuse_reply_open fuse_reply_open_compat
+#  else
+#    error Compatibility with low-level API version < 24 not supported
+#  endif
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _FUSE_LOWLEVEL_H_ */
diff --git a/fuse/include/fuse_lowlevel_compat.h b/fuse/include/fuse_lowlevel_compat.h
new file mode 100644
index 0000000..3d2902d
--- /dev/null
+++ b/fuse/include/fuse_lowlevel_compat.h
@@ -0,0 +1,155 @@
+/*
+  FUSE: Filesystem in Userspace
+  Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
+
+  This program can be distributed under the terms of the GNU LGPLv2.
+  See the file COPYING.LIB.
+*/
+
+/* these definitions provide source compatibility to prior versions.
+   Do not include this file directly! */
+
+struct fuse_lowlevel_ops_compat25 {
+	void (*init) (void *userdata);
+	void (*destroy) (void *userdata);
+	void (*lookup) (fuse_req_t req, fuse_ino_t parent, const char *name);
+	void (*forget) (fuse_req_t req, fuse_ino_t ino, unsigned long nlookup);
+	void (*getattr) (fuse_req_t req, fuse_ino_t ino,
+			 struct fuse_file_info *fi);
+	void (*setattr) (fuse_req_t req, fuse_ino_t ino, struct stat *attr,
+			 int to_set, struct fuse_file_info *fi);
+	void (*readlink) (fuse_req_t req, fuse_ino_t ino);
+	void (*mknod) (fuse_req_t req, fuse_ino_t parent, const char *name,
+		       mode_t mode, dev_t rdev);
+	void (*mkdir) (fuse_req_t req, fuse_ino_t parent, const char *name,
+		       mode_t mode);
+	void (*unlink) (fuse_req_t req, fuse_ino_t parent, const char *name);
+	void (*rmdir) (fuse_req_t req, fuse_ino_t parent, const char *name);
+	void (*symlink) (fuse_req_t req, const char *link, fuse_ino_t parent,
+			 const char *name);
+	void (*rename) (fuse_req_t req, fuse_ino_t parent, const char *name,
+			fuse_ino_t newparent, const char *newname);
+	void (*link) (fuse_req_t req, fuse_ino_t ino, fuse_ino_t newparent,
+		      const char *newname);
+	void (*open) (fuse_req_t req, fuse_ino_t ino,
+		      struct fuse_file_info *fi);
+	void (*read) (fuse_req_t req, fuse_ino_t ino, size_t size, off64_t off,
+		      struct fuse_file_info *fi);
+	void (*write) (fuse_req_t req, fuse_ino_t ino, const char *buf,
+		       size_t size, off64_t off, struct fuse_file_info *fi);
+	void (*flush) (fuse_req_t req, fuse_ino_t ino,
+		       struct fuse_file_info *fi);
+	void (*release) (fuse_req_t req, fuse_ino_t ino,
+			 struct fuse_file_info *fi);
+	void (*fsync) (fuse_req_t req, fuse_ino_t ino, int datasync,
+		       struct fuse_file_info *fi);
+	void (*opendir) (fuse_req_t req, fuse_ino_t ino,
+			 struct fuse_file_info *fi);
+	void (*readdir) (fuse_req_t req, fuse_ino_t ino, size_t size, off64_t off,
+			 struct fuse_file_info *fi);
+	void (*releasedir) (fuse_req_t req, fuse_ino_t ino,
+			    struct fuse_file_info *fi);
+	void (*fsyncdir) (fuse_req_t req, fuse_ino_t ino, int datasync,
+			  struct fuse_file_info *fi);
+	void (*statfs) (fuse_req_t req);
+	void (*setxattr) (fuse_req_t req, fuse_ino_t ino, const char *name,
+			  const char *value, size_t size, int flags);
+	void (*getxattr) (fuse_req_t req, fuse_ino_t ino, const char *name,
+			  size_t size);
+	void (*listxattr) (fuse_req_t req, fuse_ino_t ino, size_t size);
+	void (*removexattr) (fuse_req_t req, fuse_ino_t ino, const char *name);
+	void (*access) (fuse_req_t req, fuse_ino_t ino, int mask);
+	void (*create) (fuse_req_t req, fuse_ino_t parent, const char *name,
+			mode_t mode, struct fuse_file_info *fi);
+};
+
+struct fuse_session *fuse_lowlevel_new_compat25(struct fuse_args *args,
+				const struct fuse_lowlevel_ops_compat25 *op,
+				size_t op_size, void *userdata);
+
+size_t fuse_dirent_size(size_t namelen);
+
+char *fuse_add_dirent(char *buf, const char *name, const struct stat *stbuf,
+		      off64_t off);
+
+#ifndef __FreeBSD__
+
+#include <sys/statfs.h>
+
+struct fuse_lowlevel_ops_compat {
+	void (*init) (void *userdata);
+	void (*destroy) (void *userdata);
+	void (*lookup) (fuse_req_t req, fuse_ino_t parent, const char *name);
+	void (*forget) (fuse_req_t req, fuse_ino_t ino, unsigned long nlookup);
+	void (*getattr) (fuse_req_t req, fuse_ino_t ino,
+			 struct fuse_file_info_compat *fi);
+	void (*setattr) (fuse_req_t req, fuse_ino_t ino, struct stat *attr,
+			 int to_set, struct fuse_file_info_compat *fi);
+	void (*readlink) (fuse_req_t req, fuse_ino_t ino);
+	void (*mknod) (fuse_req_t req, fuse_ino_t parent, const char *name,
+		       mode_t mode, dev_t rdev);
+	void (*mkdir) (fuse_req_t req, fuse_ino_t parent, const char *name,
+		       mode_t mode);
+	void (*unlink) (fuse_req_t req, fuse_ino_t parent, const char *name);
+	void (*rmdir) (fuse_req_t req, fuse_ino_t parent, const char *name);
+	void (*symlink) (fuse_req_t req, const char *link, fuse_ino_t parent,
+			 const char *name);
+	void (*rename) (fuse_req_t req, fuse_ino_t parent, const char *name,
+			fuse_ino_t newparent, const char *newname);
+	void (*link) (fuse_req_t req, fuse_ino_t ino, fuse_ino_t newparent,
+		      const char *newname);
+	void (*open) (fuse_req_t req, fuse_ino_t ino,
+		      struct fuse_file_info_compat *fi);
+	void (*read) (fuse_req_t req, fuse_ino_t ino, size_t size, off64_t off,
+		      struct fuse_file_info_compat *fi);
+	void (*write) (fuse_req_t req, fuse_ino_t ino, const char *buf,
+		       size_t size, off64_t off, struct fuse_file_info_compat *fi);
+	void (*flush) (fuse_req_t req, fuse_ino_t ino,
+		       struct fuse_file_info_compat *fi);
+	void (*release) (fuse_req_t req, fuse_ino_t ino,
+			 struct fuse_file_info_compat *fi);
+	void (*fsync) (fuse_req_t req, fuse_ino_t ino, int datasync,
+		       struct fuse_file_info_compat *fi);
+	void (*opendir) (fuse_req_t req, fuse_ino_t ino,
+			 struct fuse_file_info_compat *fi);
+	void (*readdir) (fuse_req_t req, fuse_ino_t ino, size_t size, off64_t off,
+			 struct fuse_file_info_compat *fi);
+	void (*releasedir) (fuse_req_t req, fuse_ino_t ino,
+			    struct fuse_file_info_compat *fi);
+	void (*fsyncdir) (fuse_req_t req, fuse_ino_t ino, int datasync,
+			  struct fuse_file_info_compat *fi);
+	void (*statfs) (fuse_req_t req);
+	void (*setxattr) (fuse_req_t req, fuse_ino_t ino, const char *name,
+			  const char *value, size_t size, int flags);
+	void (*getxattr) (fuse_req_t req, fuse_ino_t ino, const char *name,
+			  size_t size);
+	void (*listxattr) (fuse_req_t req, fuse_ino_t ino, size_t size);
+	void (*removexattr) (fuse_req_t req, fuse_ino_t ino, const char *name);
+	void (*access) (fuse_req_t req, fuse_ino_t ino, int mask);
+	void (*create) (fuse_req_t req, fuse_ino_t parent, const char *name,
+			mode_t mode, struct fuse_file_info_compat *fi);
+};
+
+int fuse_reply_statfs_compat(fuse_req_t req, const struct statfs *stbuf);
+
+int fuse_reply_open_compat(fuse_req_t req,
+			   const struct fuse_file_info_compat *fi);
+
+struct fuse_session *fuse_lowlevel_new_compat(const char *opts,
+				const struct fuse_lowlevel_ops_compat *op,
+				size_t op_size, void *userdata);
+
+#endif /* __FreeBSD__ */
+
+struct fuse_chan_ops_compat24 {
+	int (*receive)(struct fuse_chan *ch, char *buf, size_t size);
+	int (*send)(struct fuse_chan *ch, const struct iovec iov[],
+		    size_t count);
+	void (*destroy)(struct fuse_chan *ch);
+};
+
+struct fuse_chan *fuse_chan_new_compat24(struct fuse_chan_ops_compat24 *op,
+					 int fd, size_t bufsize, void *data);
+
+int fuse_chan_receive(struct fuse_chan *ch, char *buf, size_t size);
+struct fuse_chan *fuse_kern_chan_new(int fd);
diff --git a/fuse/include/fuse_opt.h b/fuse/include/fuse_opt.h
new file mode 100644
index 0000000..8c08d77
--- /dev/null
+++ b/fuse/include/fuse_opt.h
@@ -0,0 +1,270 @@
+/*
+  FUSE: Filesystem in Userspace
+  Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
+
+  This program can be distributed under the terms of the GNU LGPLv2.
+  See the file COPYING.LIB.
+*/
+
+#ifndef _FUSE_OPT_H_
+#define _FUSE_OPT_H_
+
+/** @file
+ *
+ * This file defines the option parsing interface of FUSE
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Option description
+ *
+ * This structure describes a single option, and and action associated
+ * with it, in case it matches.
+ *
+ * More than one such match may occur, in which case the action for
+ * each match is executed.
+ *
+ * There are three possible actions in case of a match:
+ *
+ * i) An integer (int or unsigned) variable determined by 'offset' is
+ *    set to 'value'
+ *
+ * ii) The processing function is called, with 'value' as the key
+ *
+ * iii) An integer (any) or string (char *) variable determined by
+ *    'offset' is set to the value of an option parameter
+ *
+ * 'offset' should normally be either set to
+ *
+ *  - 'offsetof(struct foo, member)'  actions i) and iii)
+ *
+ *  - -1			      action ii)
+ *
+ * The 'offsetof()' macro is defined in the <stddef.h> header.
+ *
+ * The template determines which options match, and also have an
+ * effect on the action.  Normally the action is either i) or ii), but
+ * if a format is present in the template, then action iii) is
+ * performed.
+ *
+ * The types of templates are:
+ *
+ * 1) "-x", "-foo", "--foo", "--foo-bar", etc.	These match only
+ *   themselves.  Invalid values are "--" and anything beginning
+ *   with "-o"
+ *
+ * 2) "foo", "foo-bar", etc.  These match "-ofoo", "-ofoo-bar" or
+ *    the relevant option in a comma separated option list
+ *
+ * 3) "bar=", "--foo=", etc.  These are variations of 1) and 2)
+ *    which have a parameter
+ *
+ * 4) "bar=%s", "--foo=%lu", etc.  Same matching as above but perform
+ *    action iii).
+ *
+ * 5) "-x ", etc.  Matches either "-xparam" or "-x param" as
+ *    two separate arguments
+ *
+ * 6) "-x %s", etc.  Combination of 4) and 5)
+ *
+ * If the format is "%s", memory is allocated for the string unlike
+ * with scanf().
+ */
+struct fuse_opt {
+	/** Matching template and optional parameter formatting */
+	const char *templ;
+
+	/**
+	 * Offset of variable within 'data' parameter of fuse_opt_parse()
+	 * or -1
+	 */
+	unsigned long offset;
+
+	/**
+	 * Value to set the variable to, or to be passed as 'key' to the
+	 * processing function.	 Ignored if template has a format
+	 */
+	int value;
+};
+
+/**
+ * Key option.	In case of a match, the processing function will be
+ * called with the specified key.
+ */
+#define FUSE_OPT_KEY(templ, key) { templ, -1U, key }
+
+/**
+ * Last option.	 An array of 'struct fuse_opt' must end with a NULL
+ * template value
+ */
+#define FUSE_OPT_END { NULL, 0, 0 }
+
+/**
+ * Argument list
+ */
+struct fuse_args {
+	/** Argument count */
+	int argc;
+
+	/** Argument vector.  NULL terminated */
+	char **argv;
+
+	/** Is 'argv' allocated? */
+	int allocated;
+};
+
+/**
+ * Initializer for 'struct fuse_args'
+ */
+#define FUSE_ARGS_INIT(argc, argv) { argc, argv, 0 }
+
+/**
+ * Key value passed to the processing function if an option did not
+ * match any template
+ */
+#define FUSE_OPT_KEY_OPT     -1
+
+/**
+ * Key value passed to the processing function for all non-options
+ *
+ * Non-options are the arguments beginning with a charater other than
+ * '-' or all arguments after the special '--' option
+ */
+#define FUSE_OPT_KEY_NONOPT  -2
+
+/**
+ * Special key value for options to keep
+ *
+ * Argument is not passed to processing function, but behave as if the
+ * processing function returned 1
+ */
+#define FUSE_OPT_KEY_KEEP -3
+
+/**
+ * Special key value for options to discard
+ *
+ * Argument is not passed to processing function, but behave as if the
+ * processing function returned zero
+ */
+#define FUSE_OPT_KEY_DISCARD -4
+
+/**
+ * Processing function
+ *
+ * This function is called if
+ *    - option did not match any 'struct fuse_opt'
+ *    - argument is a non-option
+ *    - option did match and offset was set to -1
+ *
+ * The 'arg' parameter will always contain the whole argument or
+ * option including the parameter if exists.  A two-argument option
+ * ("-x foo") is always converted to single arguemnt option of the
+ * form "-xfoo" before this function is called.
+ *
+ * Options of the form '-ofoo' are passed to this function without the
+ * '-o' prefix.
+ *
+ * The return value of this function determines whether this argument
+ * is to be inserted into the output argument vector, or discarded.
+ *
+ * @param data is the user data passed to the fuse_opt_parse() function
+ * @param arg is the whole argument or option
+ * @param key determines why the processing function was called
+ * @param outargs the current output argument list
+ * @return -1 on error, 0 if arg is to be discarded, 1 if arg should be kept
+ */
+typedef int (*fuse_opt_proc_t)(void *data, const char *arg, int key,
+			       struct fuse_args *outargs);
+
+/**
+ * Option parsing function
+ *
+ * If 'args' was returned from a previous call to fuse_opt_parse() or
+ * it was constructed from
+ *
+ * A NULL 'args' is equivalent to an empty argument vector
+ *
+ * A NULL 'opts' is equivalent to an 'opts' array containing a single
+ * end marker
+ *
+ * A NULL 'proc' is equivalent to a processing function always
+ * returning '1'
+ *
+ * @param args is the input and output argument list
+ * @param data is the user data
+ * @param opts is the option description array
+ * @param proc is the processing function
+ * @return -1 on error, 0 on success
+ */
+int fuse_opt_parse(struct fuse_args *args, void *data,
+		   const struct fuse_opt opts[], fuse_opt_proc_t proc);
+
+/**
+ * Add an option to a comma separated option list
+ *
+ * @param opts is a pointer to an option list, may point to a NULL value
+ * @param opt is the option to add
+ * @return -1 on allocation error, 0 on success
+ */
+int fuse_opt_add_opt(char **opts, const char *opt);
+
+/**
+ * Add an option, escaping commas, to a comma separated option list
+ *
+ * @param opts is a pointer to an option list, may point to a NULL value
+ * @param opt is the option to add
+ * @return -1 on allocation error, 0 on success
+ */
+int fuse_opt_add_opt_escaped(char **opts, const char *opt);
+
+/**
+ * Add an argument to a NULL terminated argument vector
+ *
+ * @param args is the structure containing the current argument list
+ * @param arg is the new argument to add
+ * @return -1 on allocation error, 0 on success
+ */
+int fuse_opt_add_arg(struct fuse_args *args, const char *arg);
+
+/**
+ * Add an argument at the specified position in a NULL terminated
+ * argument vector
+ *
+ * Adds the argument to the N-th position.  This is useful for adding
+ * options at the beggining of the array which must not come after the
+ * special '--' option.
+ *
+ * @param args is the structure containing the current argument list
+ * @param pos is the position at which to add the argument
+ * @param arg is the new argument to add
+ * @return -1 on allocation error, 0 on success
+ */
+int fuse_opt_insert_arg(struct fuse_args *args, int pos, const char *arg);
+
+/**
+ * Free the contents of argument list
+ *
+ * The structure itself is not freed
+ *
+ * @param args is the structure containing the argument list
+ */
+void fuse_opt_free_args(struct fuse_args *args);
+
+
+/**
+ * Check if an option matches
+ *
+ * @param opts is the option description array
+ * @param opt is the option to match
+ * @return 1 if a match is found, 0 if not
+ */
+int fuse_opt_match(const struct fuse_opt opts[], const char *opt);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _FUSE_OPT_H_ */
diff --git a/fuse/include/old/fuse.h b/fuse/include/old/fuse.h
new file mode 100644
index 0000000..3db0945
--- /dev/null
+++ b/fuse/include/old/fuse.h
@@ -0,0 +1,9 @@
+/*
+   This header is for compatibility with older software using FUSE.
+
+   Please use 'pkg-config --cflags fuse' to set include path.  The
+   correct usage is still '#include <fuse.h>', not '#include
+   <fuse/fuse.h>'.
+*/
+
+#include "fuse/fuse.h"
diff --git a/fuse/include/stamp-h1 b/fuse/include/stamp-h1
new file mode 100644
index 0000000..b330768
--- /dev/null
+++ b/fuse/include/stamp-h1
@@ -0,0 +1 @@
+timestamp for include/config.h
diff --git a/fuse/include/sys/statvfs.h b/fuse/include/sys/statvfs.h
new file mode 100644
index 0000000..6e3e39f
--- /dev/null
+++ b/fuse/include/sys/statvfs.h
@@ -0,0 +1,18 @@
+#ifndef __STATVFS_H
+#define __STATVFS_H
+
+struct statvfs {
+	unsigned long  f_bsize;    /* file system block size */
+	unsigned long  f_frsize;   /* fragment size */
+	fsblkcnt_t     f_blocks;   /* size of fs in f_frsize units */
+	fsblkcnt_t     f_bfree;    /* # free blocks */
+	fsblkcnt_t     f_bavail;   /* # free blocks for non-root */
+	fsfilcnt_t     f_files;    /* # inodes */
+	fsfilcnt_t     f_ffree;    /* # free inodes */
+	fsfilcnt_t     f_favail;   /* # free inodes for non-root */
+	unsigned long  f_fsid;     /* file system ID */
+	unsigned long  f_flag;     /* mount flags */
+	unsigned long  f_namemax;  /* maximum filename length */
+};
+
+#endif
diff --git a/fuse/include/ulockmgr.h b/fuse/include/ulockmgr.h
new file mode 100644
index 0000000..ad55579
--- /dev/null
+++ b/fuse/include/ulockmgr.h
@@ -0,0 +1,24 @@
+/*
+  libulockmgr: Userspace Lock Manager Library
+  Copyright (C) 2006  Miklos Szeredi <miklos@szeredi.hu>
+
+  This program can be distributed under the terms of the GNU LGPLv2.
+  See the file COPYING.LIB.
+*/
+
+#include <stdint.h>
+#include <fcntl.h>
+#include <sys/types.h>
+
+/**
+ * Perform POSIX locking operation
+ *
+ * @param fd the file descriptor
+ * @param cmd the locking command (F_GETFL, F_SETLK or F_SETLKW)
+ * @param lock the lock parameters
+ * @param owner the lock owner ID cookie
+ * @param owner_len length of the lock owner ID cookie
+ * @return 0 on success -errno on error
+ */
+int ulockmgr_op(int fd, int cmd, struct flock *lock, const void *owner,
+		size_t owner_len);