| # |
| # system.prop for m7 |
| # |
| |
| rild.libpath=/system/lib/libril-qc-qmi-1.so |
| rild.libargs=-d /dev/smd0 |
| persist.rild.nitz_plmn= |
| persist.rild.nitz_long_ons_0= |
| persist.rild.nitz_long_ons_1= |
| persist.rild.nitz_long_ons_2= |
| persist.rild.nitz_long_ons_3= |
| persist.rild.nitz_short_ons_0= |
| persist.rild.nitz_short_ons_1= |
| persist.rild.nitz_short_ons_2= |
| persist.rild.nitz_short_ons_3= |
| ril.subscription.types=NV,RUIM |
| DEVICE_PROVISIONED=1 |
| |
| # |
| #system props for display |
| # |
| debug.sf.hw=1 |
| debug.egl.hw=1 |
| debug.composition.type=gpu |
| debug.enabletr=true |
| ro.hwui.renderer.disable_opaque=true |
| ro.sf.lcd_density=480 |
| debug.mdpcomp.maxlayer=3 |
| debug.egl.buffcount=4 |
| |
| dalvik.vm.heapsize=384m |
| dalvik.vm.heapgrowthlimit=192m |
| dev.pm.dyn_samplingrate=1 |
| |
| # |
| # system props for the cne module |
| # |
| persist.cne.UseCne=vendor |
| persist.cne.UseSwim=false |
| persist.cne.bat.range.low.med=30 |
| persist.cne.bat.range.med.high=60 |
| persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml |
| persist.cne.loc.policy.user=/system/etc/UserPolicy.xml |
| persist.cne.bwbased.rat.sel=false |
| persist.cne.snsr.based.rat.mgt=false |
| persist.cne.bat.based.rat.mgt=false |
| persist.cne.rat.acq.time.out=30000 |
| persist.cne.rat.acq.retry.tout=0 |
| persist.cne.sync.swim.mode=false |
| |
| ro.hdmi.enable=true |
| lpa.decode=true |
| tunnel.decode=true |
| lpa.use-stagefright=true |
| lpa.releaselock=true |
| |
| #system props for the MM modules |
| |
| media.stagefright.enable-player=true |
| media.stagefright.enable-http=true |
| media.stagefright.enable-aac=true |
| media.stagefright.enable-qcp=true |
| media.stagefright.enable-fma2dp=true |
| media.stagefright.enable-scan=true |
| mmp.enable.3g2=true |
| |
| # |
| # system props for the data modules |
| # |
| ro.use_data_netmgrd=true |
| |
| #system props for time-services |
| persist.timed.enable=true |
| |
| # System props for audio |
| persist.audio.fluence.mode=endfire |
| persist.audio.vr.enable=false |
| persist.audio.handset.mic=digital |
| # System props for soundhound |
| persist.htc.audio.pcm.samplerate=48000 |
| persist.htc.audio.pcm.channels=2 |
| |
| # System prop to select audio resampler quality |
| af.resampler.quality=255 |
| |
| # System props for global effect |
| htc.audio.global.state=0 |
| htc.audio.global.profile=0 |
| htc.audio.q6.topology=0 |
| htc.audio.global.speaker=1 |
| |
| # |
| # system prop for opengles version |
| # |
| # 131072 is decimal for 0x20000 to report version 2 |
| ro.opengles.version=131072 |
| |
| #system prop for switching gps driver to qmi |
| persist.gps.qmienabled=true |
| |
| # System property for cabl |
| ro.qualcomm.cabl=0 |
| |
| # |
| # System prop for sending transmit power request to RIL during WiFi hotspot on/off |
| # |
| ro.ril.transmitpower=true |
| |
| # For workaround for ro.baseband property. QCT use the property same as radio version to determine the architecture. |
| # But we hard code to mdm for M7. |
| ro.baseband.arch = mdm |
| |
| #Add default network type for phone reference |
| ro.telephony.default_network=9 |
| |
| # |
| #Simulate sdcard on /data/media |
| # |
| persist.fuse_sdcard=true |
| |
| # M7 Hardware Info |
| ro.product.bluetooth=4.0 |
| ro.product.display_resolution = 4.7 inch 1080p resolution |
| ro.product.main_camera = 4M |
| ro.product.front_camera = 2.1M |
| ro.product.processor = Quadcore |
| ro.product.ram = 2GB |
| ro.product.wifi = 802.11 a/b/g/n |
| |
| |
| #wifi |
| wifi.interface=wlan0 |
| wifi.supplicant_scan_interval=15 |
| wifi.softap.interface=wlan0 |
| wifi.softapconcurrent.interface=wl0.1 |
| persist.wifi.v6=true |
| persist.wifi.v6.rs.count=5 |
| persist.wifi.v6.rs.timeout=5 |
| |
| # Properties of BTLA stack |
| service.brcm.bt.activation = 0 |
| service.brcm.bt.srv_active = 0 |
| service.brcm.bt.hcid_active = 0 |
| service.brcm.bt.btld = 0 |
| service.brcm.bt.btld_pid = 0 |
| service.brcm.bt.avrcp_pass_thru = 0 |
| service.brcm.bt.avrcp_toggle = 1 |
| service.brcm.bt.local_name = |
| service.brcm.bt.4335hwerrwar = 1 |
| service.brcm.bt.TRC_HTCSDBG = 1 |
| |
| # Support HW reset |
| ro.product.hwreset = 1 |
| ro.product.hwreset.timer1 = 8 |
| ro.product.hwreset.timer2 = 11 |
| |
| #For usb storage |
| ro.usb_host = 1 |
| |
| # Preloading common control assets |
| persist.preload.common=1 |
| |
| # Force Enable HWacce for GB PlayStoreAP |
| persist.sys.htc.ui.hw = 1 |
| |
| # Perflock for inter-process activity launch and first launch |
| persist.htc.multicore.timeout = 1500 |
| |
| # Perflock for Home process lock duration |
| persist.htc.multicore.home = 800 |
| |
| # |
| # ADDITIONAL_BUILD_PROPERTIES |
| # |
| ro.carrier=unknown |
| ro.config.notification_sound=OnTheHunt.ogg |
| ro.config.alarm_alert=Alarm_Classic.ogg |
| drm.service.enabled=true |
| ro.setupwizard.mode=OPTIONAL |
| ro.com.google.gmsversion=4.1_r4 |
| lpa.decode=false |
| tunnel.decode=false |
| ro.service.dpsvr.enabled=true |
| ro.vendor.extension_library=/system/lib/libqc-opt.so |
| dalvik.vm.lockprof.threshold=500 |
| net.bt.name=Android |
| dalvik.vm.stack-trace-file=/data/anr/traces.txt |