| #Test |
| NTP_SERVER=time.gpsonextra.net |
| #Asia |
| # NTP_SERVER=asia.pool.ntp.org |
| #Europe |
| # NTP_SERVER=europe.pool.ntp.org |
| #North America |
| # NTP_SERVER=north-america.pool.ntp.org |
| |
| XTRA_SERVER_1=https://xtrapath1.izatcloud.net/xtra2.bin |
| XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra2.bin |
| XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra2.bin |
| |
| # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info |
| # 4 - Debug, 5 - Verbose |
| DEBUG_LEVEL = 3 |
| |
| # Intermediate position report, 1=enable, 0=disable |
| INTERMEDIATE_POS=0 |
| |
| # supl version 1.0 |
| SUPL_VER=0x10000 |
| |
| # Error Estimate |
| # _SET = 1 |
| # _CLEAR = 0 |
| ERR_ESTIMATE=0 |
| |
| # GPS Capabilities bit mask |
| # SCHEDULING = 1 |
| # MSB = 2 |
| # MSA = 4 |
| # ULP = 0x20 |
| # default = MSA | MSB | SCHEDULING | ULP |
| CAPABILITIES=0x17 |
| |
| # Accuracy threshold for intermediate positions |
| # less accurate positions are ignored, 0 for passing all positions |
| # ACCURACY_THRES=5000 |
| |
| ################################ |
| ##### AGPS server settings ##### |
| ################################ |
| |
| # FOR SUPL SUPPORT, set the following |
| # SUPL_HOST=supl.host.com or IP |
| # SUPL_PORT=1234 |
| |
| # FOR C2K PDE SUPPORT, set the following |
| # C2K_HOST=c2k.pde.com or IP |
| # C2K_PORT=1234 |
| |
| ################################ |
| # Sensor Settings |
| ################################ |
| |
| # Needs to be set explicitly based on sensor |
| # There is no default value. |
| #GYRO_BIAS_RANDOM_WALK= |
| |
| # Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0) |
| SENSOR_ACCEL_BATCHES_PER_SEC=2 |
| SENSOR_ACCEL_SAMPLES_PER_BATCH=5 |
| SENSOR_GYRO_BATCHES_PER_SEC=2 |
| SENSOR_GYRO_SAMPLES_PER_BATCH=5 |
| # Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0) |
| SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4 |
| SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25 |
| SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4 |
| SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25 |
| |
| # Sensor Control Mode (0=AUTO, 1=FORCE_ON) |
| SENSOR_CONTROL_MODE=0 |
| |
| # Enable or Disable Sensors for GPS use (0=Enable, 1=Disable) |
| SENSOR_USAGE=1 |
| |
| # Choose GSIFF sensor provider (1=DSPS, 2=Android NDK) |
| SENSOR_PROVIDER=1 |
| |
| ################################ |
| # Indoor Positioning Settings |
| ################################ |
| # 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only |
| QUIPC_ENABLED = 0 |
| |
| ################################ |
| # EXTRA SETTINGS |
| ################################ |
| # Enable or Disable Wiper (1=Enable, 0=Disable) |
| ENABLE_WIPER=0 |
| |
| # NMEA provider (1=Modem Processor, 0=Application Processor) |
| NMEA_PROVIDER=1 |
| |
| |
| #################################### |
| # LTE Positioning Profile Settings |
| #################################### |
| # 0: Enable RRLP on LTE(Default) 1: Enable LPP_User_Plane on LTE |
| LPP_PROFILE = 0 |