)]}'
{
  "log": [
    {
      "commit": "1291f3098a1527e9b563a1ad40455c1ef1ecdf15",
      "tree": "eadd451fd46706414b581ade50a84f6f26473cf2",
      "parents": [
        "1b1dfbac8087d7ec079d51bf004254b93b7646a6"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Wed Aug 24 17:26:05 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Wed Aug 24 17:26:05 2011 -0700"
      },
      "message": "audio: reduce DL2 ABE gain to reduce handsfree distortion\n\nAlso increase the codec volume to compensate.\n\nChange-Id: I34bd16141d70cd154df23ff815800bbace887e88\n"
    },
    {
      "commit": "1b1dfbac8087d7ec079d51bf004254b93b7646a6",
      "tree": "cd9e44b7665500e7737d1a4c70d33a5f42191a42",
      "parents": [
        "abff69f4e63328e7a4460dae4e39aad4c0329647"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Tue Aug 23 18:08:41 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Tue Aug 23 18:08:41 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n899aef9 gpu: pvr: Update to DDK 1.8@277528\nfa3b76d Revert \"ARM: omap4460: disable double linefill\"\n3e6d939 ARM: omap4: tuna: Reuse board information for panic\n4b0f08a ARM: omap: tuna: enable console flush on reboot\ne0ab14a Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nd91436f Merge branch \u0027android-3.0\u0027 into android-omap-3.0\n7659449 ARM: add option to flush console before reboot\ncd1313b42 net: wireless: bcmdhd: Update to 5.90.125.69\ne05b030 input: mms_ts: firmware and driver update for VA24-3\nb4b5659 input: mms_ts: use i2c_transfer for reading finger data\n039a130 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n57b369e Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nc01d5f2 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\n5f3d6af OMAP: tuna: led: tuna defconfig\n41200c2 OMAP: tuna: led: board file for led driver\n92399ae leds: an30259a: add initial driver\nb207fa8 OMAP: EMIF: diable and clear irqs on shutdown and boot\n2b3506d OMAP4-SGX: Revise SGX driver DVFS interactions\n5a23372 Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n5e565ff ASoC: ABE DSP: Restore context before seting ABE processing point\n15f9b52 ASoC: core: Cancel any pending resume before suspending\nd2304845 Revert \"OMAP4: Serial: Add serial_omap_wake_peer function.\"\ne6987e7 OMAP4: Serial: Add serial_omap_wake_peer function.\n052f2e1 tiler: fix a use-after free error\nd5511f8 netfilter: xt_qtaguid: add some tagging/matching stats\n97aca38 netfilter: xt_qtaguid: Fix sockfd_put() call within spinlock\n6c8e0ea Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n871c855 ASoC: sdp4430: Use complete stream names for aux DAIs\neff5726 ASoC: ABE: Fix stream names for modem DAIs\n74b0142 ASoC: DAPM: Include power seq run in critical section\nefcf89c panic: Add board ID to panic output\n\nChange-Id: I3c50a8cc86f7a18dd76841d627df4e94a098363c\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "abff69f4e63328e7a4460dae4e39aad4c0329647",
      "tree": "d917c25f6a78af4fb99eb5582d6da6430d3a67a4",
      "parents": [
        "469e8acb6b96d4a8ae2f7247f7ad786a0fab74a9",
        "cb316b52d2abd26acf827317924d58b1c9bcec84"
      ],
      "author": {
        "name": "Mathias Agopian",
        "email": "mathias@google.com",
        "time": "Mon Aug 22 20:05:12 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Mon Aug 22 20:05:12 2011 -0700"
      },
      "message": "Merge \"Pull some configurations over from Crespo.\""
    },
    {
      "commit": "cb316b52d2abd26acf827317924d58b1c9bcec84",
      "tree": "67c36a03b7c5cd25f95e3e919c7cc4d402c2fb79",
      "parents": [
        "6b0e9ec7466bf7d9b4e4f49ba2d3f7daa3d3b26e"
      ],
      "author": {
        "name": "Mathias Agopian",
        "email": "mathias@google.com",
        "time": "Mon Aug 22 18:40:10 2011 -0700"
      },
      "committer": {
        "name": "Mathias Agopian",
        "email": "mathias@google.com",
        "time": "Mon Aug 22 18:40:10 2011 -0700"
      },
      "message": "Pull some configurations over from Crespo.\n\nMost important is of course config_animateScreenLights.\n\nChange-Id: I3cf053443c71af7ef74484d0a86f30703448c45e\n"
    },
    {
      "commit": "469e8acb6b96d4a8ae2f7247f7ad786a0fab74a9",
      "tree": "55f1a3f1e1d5cce126605059ff2a105fa17f9957",
      "parents": [
        "956e565e18b9e7deaa7ab7c211e364d1b858135c"
      ],
      "author": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Mon Aug 22 16:12:34 2011 -0700"
      },
      "committer": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Mon Aug 22 16:12:34 2011 -0700"
      },
      "message": "Update kernel\n\nChange-Id: I1cb1b5d657d6d8470a7b6ce2c94ac8cab33023e7\nChanges:\n f1a5e7f OMAP4: tuna: Bluetooth: Add uart wake-peer function for wake up\n bluetooth.\n 4ac92a2 ARM: omap4: tuna: pass uart2 rts info to driver\n 7773d97 tuna: define BT uart pad mux\n 93a923d ARM: omap4: tuna: allow uart to be woken up on gpio wake\n a1e7690 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n ee242fa OMAP4: Serial: Add serial_omap_wake_peer function.\n 86a8635 Toro: Update USB gadget for DM feature\n 2792f02 ARM: Panda: Update PVR SGX flags\n"
    },
    {
      "commit": "956e565e18b9e7deaa7ab7c211e364d1b858135c",
      "tree": "a5d2408ac3a059f21cdf92746d88c32b74fbdca1",
      "parents": [
        "6b0e9ec7466bf7d9b4e4f49ba2d3f7daa3d3b26e"
      ],
      "author": {
        "name": "ln -s manifests/local_manifest.xml",
        "email": "hyungseoung.yoo@samsung.com",
        "time": "Wed Aug 10 13:30:50 2011 -0700"
      },
      "committer": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Mon Aug 22 14:40:23 2011 -0700"
      },
      "message": "Bluetooth : enable lpm in init.tuna.rc\n\nChange-Id: I0d29d6cc3f4e12e3cc051e3671d25e5fbb28846f\n"
    },
    {
      "commit": "6b0e9ec7466bf7d9b4e4f49ba2d3f7daa3d3b26e",
      "tree": "0805f5113356491f7d224a4755d06e5dfdc88023",
      "parents": [
        "26038b858afd7fa82d983159b49a5c60f4630050"
      ],
      "author": {
        "name": "sujin119.kim",
        "email": "sujin119.kim@samsung.com",
        "time": "Fri Jul 29 15:24:07 2011 +0900"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Mon Aug 22 12:38:16 2011 -0700"
      },
      "message": "Toro: Update USB configuration for DM feature\n\n- Add configurations for RNDIS+DM composite\n\nChange-Id: I7ef3a129b13d7a616bd9dd17dcb257f95af75381\nSigned-off-by: sujin119.kim \u003csujin119.kim@samsung.com\u003e\n"
    },
    {
      "commit": "26038b858afd7fa82d983159b49a5c60f4630050",
      "tree": "cd35064a20786eb6414161f393400a896d62dc8d",
      "parents": [
        "c341155c4a3fd490b7700e048758aa491a8069c5"
      ],
      "author": {
        "name": "UK KIM",
        "email": "w0806.kim@samsung.com",
        "time": "Wed Jul 13 02:04:04 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 22 09:28:00 2011 -0700"
      },
      "message": "audio: change time and method to change clock and audio path\n\n1. clock sync: after AP (mcbsp2) is enabled\n2. audio path: according to AP\u0027s output device\n\nChange-Id: I5e0214bea31a722ce43fe92fb1d54bffb291cae9\n"
    },
    {
      "commit": "c341155c4a3fd490b7700e048758aa491a8069c5",
      "tree": "ca0bf9f09eae59e8e1ac6cd4121af02a1e0b48e3",
      "parents": [
        "48da04306dc59642d782c6c256f32bfc29d982b2",
        "083c5659742bc9095d8f9007e050568e10e71fc1"
      ],
      "author": {
        "name": "Rajneesh Chowdury",
        "email": "rajneeshc@google.com",
        "time": "Fri Aug 19 15:01:48 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Fri Aug 19 15:01:48 2011 -0700"
      },
      "message": "Merge \"Fix for 4142219 Don\u0027t hard code platform-specific limitations.\""
    },
    {
      "commit": "48da04306dc59642d782c6c256f32bfc29d982b2",
      "tree": "1eb8bc5c5a91daa30fa26c61ae8e99539c02bc78",
      "parents": [
        "6bcb6a557b8d8b3605aa57357f717a23f374fd24"
      ],
      "author": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Fri Aug 19 12:09:31 2011 -0700"
      },
      "committer": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Fri Aug 19 12:09:31 2011 -0700"
      },
      "message": "Updated kernel prebuilt\n\n57d3855 ARM: omap4: tuna: Pass VIA_PS_HOLD gpio to the modem driver\n6d94f22 modem_if: toro: Control the gpio_cp_off gpio\n35894b2 fsa9480: keep ownership of port if nothing is attached\n1ee5fcb Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n2ad370d Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n3aa1ec5 OMAP4: serial: introduce uart wakeup function\n26ef8a3 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n663de09 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n2b51bda OMAP4: Modify POR Prefetch offset value.\n9836877 serial: omap: uart: allow fine grained control of rts line\n9fa9371 misc: modem_if: Add CP Ramdump io-devices in board file\nde401be misc: modem_if: Add CP Ramdump \u0026 CP recovery for HSPA\n310f8be ARM: omap4: tuna: Add vusim control for vlcd-iovcc 2.2v.\nbd01303 serial: uart: fix context loss conter check\n904119f Serial: UART: Disable wakeup events after port shutdown\n\nChange-Id: Icdfb42dfaedd81060a627dee15004cd09511ef97\n"
    },
    {
      "commit": "6bcb6a557b8d8b3605aa57357f717a23f374fd24",
      "tree": "f0e3e1161ad032564404116f04711510172f78ee",
      "parents": [
        "03d0b42e21c0f8147acca0e3db383ea04db6384b",
        "46650400dd01713441bae775aae54e4fd4950ab9"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Fri Aug 19 09:19:50 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Fri Aug 19 09:19:50 2011 -0700"
      },
      "message": "Merge \"audio: reduce headset volume\""
    },
    {
      "commit": "03d0b42e21c0f8147acca0e3db383ea04db6384b",
      "tree": "f652e75b82466df680401d7dd94bb0ce0ba849a1",
      "parents": [
        "7891de46d1f472623df2e237c39e00dc0781d036",
        "0d55371724eab462f2c4309b08d6cfe9b34c77da"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Aug 18 17:07:38 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Thu Aug 18 17:07:38 2011 -0700"
      },
      "message": "Merge \"Updated kernel prebuilt\""
    },
    {
      "commit": "0d55371724eab462f2c4309b08d6cfe9b34c77da",
      "tree": "ce4dfed9db0f1307d0ec3897404874556dd33bf3",
      "parents": [
        "1eed2d18e6732f779f9e1c512ee6efe02837a725"
      ],
      "author": {
        "name": "Dmitry Shmidt",
        "email": "dimitrysh@google.com",
        "time": "Thu Aug 18 16:09:36 2011 -0700"
      },
      "committer": {
        "name": "Dmitry Shmidt",
        "email": "dimitrysh@google.com",
        "time": "Thu Aug 18 16:09:36 2011 -0700"
      },
      "message": "Updated kernel prebuilt\n\n9579262 ARM: omap4460: disable double linefill\n4b2acd0 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\ne44b363 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n39a6a24 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\n8b404d1 net: wireless: bcmdhd: Fix Softap initialization\na24b205 gpu: pvr: Add memory bus throughput constraint\n19feb3d OMAP4: L2: Don\u0027t set POR chicken bit 25.\n6cc17e7 OMAP4: Fix EMIF_PWR_MGMT_CTRL shadow REG_PD_TIM value\ncad0af8 misc: fsa9480: MHL power detection\n7cec483 netfilter: xt_qtaguid: Fix socket refcounts when tagging\n\nChange-Id: I86c6deef4fdbe1a4cff898b7b7f349e74d1bcf66\nSigned-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n"
    },
    {
      "commit": "46650400dd01713441bae775aae54e4fd4950ab9",
      "tree": "48566525e21f725ea8a798f897657f586542337b",
      "parents": [
        "1eed2d18e6732f779f9e1c512ee6efe02837a725"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Thu Aug 18 15:49:47 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Thu Aug 18 15:49:50 2011 -0700"
      },
      "message": "audio: reduce headset volume\n\nThe headset volume needs to be reduced for two reasons:\n\n1. Loud volumes trigger headset detection interrupts.\n2. The current volume can damage hearing even on low\n   sensitivity and high impedance headphones.\n\nChange-Id: I639bc8bc1505b6d2f22a8f5581c16583a721770c\n"
    },
    {
      "commit": "7891de46d1f472623df2e237c39e00dc0781d036",
      "tree": "f561a4bdf3ecd4bc966c7c644a23b869321a3ea9",
      "parents": [
        "082c9cca4faf63a060aab6ef6502eb6c471b4070"
      ],
      "author": {
        "name": "Arve Hjønnevåg",
        "email": "arve@android.com",
        "time": "Wed Aug 17 17:51:47 2011 -0700"
      },
      "committer": {
        "name": "Arve Hjønnevåg",
        "email": "arve@android.com",
        "time": "Thu Aug 18 15:41:14 2011 -0700"
      },
      "message": "sensors: Let MPLSensor populate the sensor list with the sensors it provides\n\nIf the mpl library is not available we do not want the fused sensors from\nMPLSensor.\n\nChange-Id: If2ac70188db8c0319cc24dc546d60a34de1c986d\n"
    },
    {
      "commit": "082c9cca4faf63a060aab6ef6502eb6c471b4070",
      "tree": "441991c676caf314f1f826b9a28c41f658ec16df",
      "parents": [
        "1eed2d18e6732f779f9e1c512ee6efe02837a725"
      ],
      "author": {
        "name": "Arve Hjønnevåg",
        "email": "arve@android.com",
        "time": "Mon Aug 15 19:56:46 2011 -0700"
      },
      "committer": {
        "name": "Arve Hjønnevåg",
        "email": "arve@android.com",
        "time": "Wed Aug 17 19:58:43 2011 -0700"
      },
      "message": "Use libinvensense_mpl\n\nThis binary library provides better compass calibration\nand sensor fusion than just using the open source library.\n\nChange-Id: Iaadf8b19c8a25811799231a5e443f68d1aa7639b\n"
    },
    {
      "commit": "1eed2d18e6732f779f9e1c512ee6efe02837a725",
      "tree": "6e1778c5a9cc0c0ec457c406eef6c34862973911",
      "parents": [
        "3b5a3d31396886059f4c24db3be92503fbfabcdb",
        "f9b2404a3281d2a61587179a8eef27f38e192d08"
      ],
      "author": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Wed Aug 17 19:46:11 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Wed Aug 17 19:46:11 2011 -0700"
      },
      "message": "Merge \"misc: modem_if: Add \u0027radio\u0027 permission for ramdump io-devices\""
    },
    {
      "commit": "f9b2404a3281d2a61587179a8eef27f38e192d08",
      "tree": "0f24f999bd5e5e0e4fda9653c96eccb89c903c2f",
      "parents": [
        "36b47e4586f7525ce9a13791889574b09e54c498"
      ],
      "author": {
        "name": "wonhee",
        "email": "wonhee48.seo@samsung.com",
        "time": "Tue Aug 16 03:52:09 2011 -0700"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Wed Aug 17 18:01:45 2011 -0700"
      },
      "message": "misc: modem_if: Add \u0027radio\u0027 permission for ramdump io-devices\n\n1. umts_ramdump0 : HSPA.\n2. cdma_ramdump0 : CDMA.\n3. lte_ramdump0 : LTE.\n\nChange-Id: I3fbde265666e0f13d56a3adaa54a3a6315ca3731\nSigned-off-by: wonhee \u003cwonhee48.seo@samsung.com\u003e\n"
    },
    {
      "commit": "3b5a3d31396886059f4c24db3be92503fbfabcdb",
      "tree": "f388481aca1b1af652a8a97dad242925a1ec5fc3",
      "parents": [
        "36b47e4586f7525ce9a13791889574b09e54c498"
      ],
      "author": {
        "name": "Erik Gilling",
        "email": "konkers@android.com",
        "time": "Wed Aug 17 16:28:18 2011 -0700"
      },
      "committer": {
        "name": "Erik Gilling",
        "email": "konkers@android.com",
        "time": "Wed Aug 17 16:28:18 2011 -0700"
      },
      "message": "new kernel prebuilt\n\nincludes:\ne0242bb Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nc741300 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n9834c0793 OMAP:OMAPLFB: Flip using dsscomp if already using dsscomp\nfa904d5 OMAP:FB: Export omapfb_mode_to_dss_mode.\n4b85a0b watchdog: omap: Pet the watchdog in interrupt context\nb1de11d ARM: omap4: tuna: driver update for vibrator enable pin change\n10d68c0 mfd: twl6030: Disable IRQ during suspend\n175b690 mfd: twl6040: HACK: Increase automatic power-up timeout\nf86f435 Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n384774d ASoC: Fix DAPM sequence run for per-widget I/O methods\n0d08e56 ASoC: dapm: Fix race condition for widgets power list creation\n175c07e OMAP: hwmod: enable mux after module clocks\n\nChange-Id: I8bf89b8573c2ad9fcd863515a5c6befa12ba194e\nSigned-off-by: Erik Gilling \u003ckonkers@android.com\u003e\n"
    },
    {
      "commit": "36b47e4586f7525ce9a13791889574b09e54c498",
      "tree": "c5fd50f2ba3c20d4523b004cc46c00119e7fd140",
      "parents": [
        "4f63ff26f3b2abf798de48fde2c6e9a582517d8a"
      ],
      "author": {
        "name": "Erik Gilling",
        "email": "konkers@android.com",
        "time": "Wed Aug 17 14:24:17 2011 -0700"
      },
      "committer": {
        "name": "Erik Gilling",
        "email": "konkers@android.com",
        "time": "Wed Aug 17 14:24:17 2011 -0700"
      },
      "message": "new kernel prebuilt\n\nincludes:\n1a05d99 ARM: tuna: update defconfig with new SGX tracing options\n71e114a Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n55c2678 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\ncb6a820 gpu: pvr: Update to DDK 1.8@276629\n4f3dafa gpu: pvr: Update to DDK 1.8@275916\n4dbc4b6 gpu: pvr: Update to DDK 1.8@275540\n36355b9 gpu: pvr: Update to DDK 1.8@275425\nf3bf6f1 gpu: pvr: Update to DDK 1.8@274836\ncb4cdfc gpu: pvr: Update to DDK 1.8@274226\n\nChange-Id: I4410d1e60b820666ca3694c7549bd11319421f95\nSigned-off-by: Erik Gilling \u003ckonkers@android.com\u003e\n"
    },
    {
      "commit": "4f63ff26f3b2abf798de48fde2c6e9a582517d8a",
      "tree": "13bb8100132484bb6504766608b186dfa0afd9d3",
      "parents": [
        "75419be3e2af232e0ea63e2c56f0e9abe52f78c8",
        "2699d0b79c45f76bff84f5b7fa5ea2e53722bec1"
      ],
      "author": {
        "name": "Doug Zongker",
        "email": "dougz@android.com",
        "time": "Wed Aug 17 13:21:08 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Wed Aug 17 13:21:08 2011 -0700"
      },
      "message": "Merge \"add NLP package names to tuna config.xml\""
    },
    {
      "commit": "2699d0b79c45f76bff84f5b7fa5ea2e53722bec1",
      "tree": "eb75ca9703f1302735f37af9bd5e2cf326924b02",
      "parents": [
        "53d6229624818e13e90308dcbec8a664820fbfab"
      ],
      "author": {
        "name": "Doug Zongker",
        "email": "dougz@android.com",
        "time": "Wed Aug 17 13:12:03 2011 -0700"
      },
      "committer": {
        "name": "Doug Zongker",
        "email": "dougz@android.com",
        "time": "Wed Aug 17 13:13:04 2011 -0700"
      },
      "message": "add NLP package names to tuna config.xml\n\nWithout this, tuna has no system network location provider.\n\nBug: 5159063\nChange-Id: I41269252383a39b3538d2d8a241f14ee824e19e8\n"
    },
    {
      "commit": "75419be3e2af232e0ea63e2c56f0e9abe52f78c8",
      "tree": "ead9f311da8be53eab3944c0eda26970976d3b59",
      "parents": [
        "53d6229624818e13e90308dcbec8a664820fbfab"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Wed Aug 17 12:38:11 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Wed Aug 17 12:38:11 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\ne2f59d5 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n2542732 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nd4ceb07 ARM: omap4: cpufreq: Add a memory throughput constraint\ne4f8101 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n9502260 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nf5c2c88 OMAP:DSS2: Fix callback propagation in dss_cache pipeline for disabled overlays\nf1b02cb OMAP:DSSCOMP: Blank manager before turning off its display\n1e399ff OMAP:DSS2: Add manager blanking support\nd9f2305 OMAP:DSS2: Add state notifiers before panel is disabled\n453ac85 OMAP:DSS2: Apply individual manager configurations consistently\n202a791 OMAP:DSSCOMP: Fix potential race condition when apply composition fails\n77dbc87 OMAP:DSS: WA for HW issue in dss_apply_irq_handler where GO is still set\n53c43c2 Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n7198555 ASoC: DSP: Identify runtime update type\n\nChange-Id: I7c4519ac22f23534e41e6f45829d12766c0d3cb5\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "53d6229624818e13e90308dcbec8a664820fbfab",
      "tree": "781c4186a51f93ae06e72e21225078c55341269f",
      "parents": [
        "68228be7fae3471d689dc9e82d1072d6a00c542d"
      ],
      "author": {
        "name": "repo sync",
        "email": "isheriff@google.com",
        "time": "Mon Aug 15 21:43:47 2011 -0700"
      },
      "committer": {
        "name": "repo sync",
        "email": "isheriff@google.com",
        "time": "Tue Aug 16 20:53:54 2011 -0700"
      },
      "message": "add p2p support on prime\n\nBug: 5002384\nChange-Id: I6042e8900c308801ef9ac8d1445d1d6025c5a7c9\n"
    },
    {
      "commit": "68228be7fae3471d689dc9e82d1072d6a00c542d",
      "tree": "058d50c170f581d9500a6b404d4c6d805b4b380e",
      "parents": [
        "1a4506f578f868dd68b4a8b04726837e4d9c305b"
      ],
      "author": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Tue Aug 16 20:09:37 2011 -0700"
      },
      "committer": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Tue Aug 16 20:09:37 2011 -0700"
      },
      "message": "Updated kernel prebuilt\n\n9227287 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n26e19e4 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\n0b9c602 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n31b69aa OMAP4: Tuna: Regulator: Add VAUX1/VUSIM/V2V1 regulator init data\n3a0a7f5 OMAP4: HS: USE PPA API to program the POR register instead of Monitor API.\na324fbf OMAP4: Enable full L2$ for 4460 ES1.1 Silicon.\nafd454e ARM: omap4: Add id for 4460 ES1.1\n532a322 ARM: omap4: Increase chip id size to 32 bits\n5ada9e2 usb: musb: fix pm_runtime calls while atomic\n20ac708 usb: musb: gadget: avoid runtime pm call in atomic context\nceb40e2 net: wireless: bcmdhd: Update to version 5.90.125.65\n28e2038 net: wireless: bcmdhd: Update to 5.90.125.64\n20bfdd5 net: wireless: bcmdhd: Fixing missing WLP2P defintion for p2p\n856968d OMAP4: PM: PRCM debug remove non-existent register\n40ccab9 OMAP: PM: Lock clocks list while generating summary\n794541e OMAP: Add debugfs node to show the summary of all clocks\n9333540 ARM: omap4: panda: Enable support for Keyspan USB serial adapters\n\nChange-Id: I69cafba0c2466f7a035cc0935c3f125a4cdac478\n"
    },
    {
      "commit": "083c5659742bc9095d8f9007e050568e10e71fc1",
      "tree": "e166935795eae3385db97923207b937e302ae703",
      "parents": [
        "ed31e5e8a74421bfb88505b4002c8b6e6a91d5f9"
      ],
      "author": {
        "name": "Rajneesh Chowdury",
        "email": "rajneeshc@google.com",
        "time": "Fri Aug 12 16:55:00 2011 -0700"
      },
      "committer": {
        "name": "Rajneesh Chowdury",
        "email": "rajneeshc@google.com",
        "time": "Tue Aug 16 18:51:17 2011 -0700"
      },
      "message": "Fix for 4142219 Don\u0027t hard code platform-specific limitations.\n\nSet the Export video codec profile and level\n\nChange-Id: Ice3b051b256dfe228954d19c4cdc98dba7532c8a\n"
    },
    {
      "commit": "1a4506f578f868dd68b4a8b04726837e4d9c305b",
      "tree": "7d6b6240ec65244cee89211c7e40a15e04b88681",
      "parents": [
        "8430ae8a5198a798ab568cd07b7e7f97ae1e6a01"
      ],
      "author": {
        "name": "Mike Lockwood",
        "email": "lockwood@android.com",
        "time": "Tue Aug 16 12:41:26 2011 -0700"
      },
      "committer": {
        "name": "Mike Lockwood",
        "email": "lockwood@android.com",
        "time": "Tue Aug 16 12:41:26 2011 -0700"
      },
      "message": "config.xml: Use rndis0 instead of usb0 for USB tethering\n\nChange-Id: I30d9313c6823f41072cbe0e8b55e982e81951512\nSigned-off-by: Mike Lockwood \u003clockwood@android.com\u003e\n"
    },
    {
      "commit": "8430ae8a5198a798ab568cd07b7e7f97ae1e6a01",
      "tree": "b7a5681fc0c0801aaf54117fcbca49c857f9c9d2",
      "parents": [
        "ceebf9f3220e39c9e42e29d4bb654eace1a947a2"
      ],
      "author": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Tue Aug 16 00:13:48 2011 -0700"
      },
      "committer": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Tue Aug 16 00:13:48 2011 -0700"
      },
      "message": "Updated kernel prebuilt\n\nd3415a0 misc: modem_if: Remove fixed mac address for promiscuous mode\ncf5b58b misc: modem_if: Add work-q for rx packet data.\n3ce903d tuna: toro: pass transceiver clock to ehci driver\ncaabb65 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n1111c5f Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nf135c16 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\nb3fe8ce hid-multitouch: Filter collections by application usage.\n4490641 hid-debug: Show application usage for each collection.\nf890de9 ARM: omap4: tuna: Add names for 5th sample devices\n7f54584 ARM: omap4: tuna: Remove prelunchbox and lunchbox support\n5e517c8 ARM: omap4: tuna: Remove prelunchbox and lunchbox hsmmc support\n2278485 ARM: omap4: tuna: Remove lunchbox sensor support\n672a6dc ARM: omap4: tuna: Remove prelunchbox and lunchbox charger support\n5ba7c34 ARM: omap4: tuna: Remove prelunchbox touchscreen and volume buttons\n1e8a968 ARM: omap4: tuna: Remove prelunchbox display support\n43deff8 usb: ehci-omap: control transceiver clock\ne5356cf OMAP4: tuna: Fix build error when CONFIG_SEC_MODEM\u003dn\n5f95fa9 arm: omap: usb: allow for external transceiver control\ncbee832 tuna: enable BT wakeup capability via gpio\n6c7dd4b usb: gadget: android: Only call ctrlrequest callback on enabled functions\n394bf63 USB: gadget: android: Use \"rndis%d\" for RNDIS device name instead of \"usb%d\"\n\nChange-Id: I36f26de99f0a589175803f5daa0f43d3fa5e2fe6\n"
    },
    {
      "commit": "ceebf9f3220e39c9e42e29d4bb654eace1a947a2",
      "tree": "e67d2e13c58e8add70b71d4a7aa706207e194942",
      "parents": [
        "df7211a7cf2cbdcb5d986231ec624668c04e193e",
        "320158b8df05a1ab290c7ae29fbd3c16191c612d"
      ],
      "author": {
        "name": "Robert Greenwalt",
        "email": "rgreenwalt@google.com",
        "time": "Fri Aug 12 16:20:51 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Fri Aug 12 16:20:51 2011 -0700"
      },
      "message": "Merge \"Fix Tuna config to not have LTE connection types.\""
    },
    {
      "commit": "320158b8df05a1ab290c7ae29fbd3c16191c612d",
      "tree": "5bf9fc8eb968bd1b9ca6f15b5a5a3fe91e28b0a3",
      "parents": [
        "1aad5e51bf54fc35f09505fab723b3e1d0b70cbc"
      ],
      "author": {
        "name": "Robert Greenwalt",
        "email": "rgreenwalt@google.com",
        "time": "Fri Aug 12 16:01:59 2011 -0700"
      },
      "committer": {
        "name": "Robert Greenwalt",
        "email": "rgreenwalt@google.com",
        "time": "Fri Aug 12 16:01:59 2011 -0700"
      },
      "message": "Fix Tuna config to not have LTE connection types.\n\nChange-Id: I2ca2984a4eb944ffab7ce69052dd974b796f9893\n"
    },
    {
      "commit": "df7211a7cf2cbdcb5d986231ec624668c04e193e",
      "tree": "a0fa2c37834590c72462e288d5d19ce400067784",
      "parents": [
        "1aad5e51bf54fc35f09505fab723b3e1d0b70cbc"
      ],
      "author": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Fri Aug 12 14:44:33 2011 -0700"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Fri Aug 12 14:44:33 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n17e32f4 misc: modem_if: Add NET bridge driver\n555c7ee misc: modem_if: Enable NET bridge driver\n4e715df Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nfa4d423 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nacccda1 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\nafd187e Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n97c934c ASoC: ABE HAL: add 4kHz low-pass filter to DL1 EQ\n36abee0 ASoC: sdp4430: avoid any delay on HS/HF power down time\nb8698bc ASoC: dapm: Use card_list during DAPM shutdown\n3712cbc OMAP4: PM: Compile PRCM debug hacks only for OMAP4\nb85f29e android: logger: bump up the logger buffer sizes\n5ea1b0c toro: modem_if: board: Added mux setting for pda and phone active gpio.\nd6d2152 toro: modem_if: dpram_link: Added control pda active gpio and replaced memcpy by read/write\n6f59761 usb: musb: fix pm_runtime calls while atomic\nffcde4f usb: musb: gadget: avoid runtime pm call in atomic context\n3bded00 Bluetooth: hidp: Don\u0027t release device ref if never held\ne5e416a Bluetooth: hidp: Only free input device if failed register\n6b7f77e Bluetooth: hidp: Fix memory leak of cached report descriptor\n3f8c499 Bluetooth: hidp: Fix session cleanup on failed conn add\n8624f2b Bluetooth: bnep: Fix deadlock in session deletion\ndfe4ecd Bluetooth: Don\u0027t use cmd_timer to timeout HCI reset command\nb47b124 power: max17040: Change gaging cycle as to use alarm\n17ab23c misc : modem_if: modem_ctl: modify lte power on/off\nde153a2 arch : arm : modem_if: change lte power gpio init value and mux framework\n8cc5682 OMAP4: PM: 32-bit reads for I/O pad wakeup event registers\n\nChange-Id: Ib7cacad69820986d80d8d73181fe02c73c7adf0f\n"
    },
    {
      "commit": "1aad5e51bf54fc35f09505fab723b3e1d0b70cbc",
      "tree": "a4604b8a5a4eac6a55e896fd22089656a0fb5b3a",
      "parents": [
        "05e1737cce9be26803d36f46f891076e01e16a65",
        "8c5c452c89071cb2880b6af6cf4c727f68b623ad"
      ],
      "author": {
        "name": "John Huang",
        "email": "jsh@google.com",
        "time": "Thu Aug 11 23:45:04 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Thu Aug 11 23:45:04 2011 -0700"
      },
      "message": "Merge \"Add networkAttributes for fota, ims and cbs.\""
    },
    {
      "commit": "05e1737cce9be26803d36f46f891076e01e16a65",
      "tree": "5bf9fc8eb968bd1b9ca6f15b5a5a3fe91e28b0a3",
      "parents": [
        "d6e44ab93744db453622edd74f03cf64fb94865a"
      ],
      "author": {
        "name": "wonhee",
        "email": "wonhee48.seo@samsung.com",
        "time": "Wed Aug 10 17:31:13 2011 -0700"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Thu Aug 11 21:17:12 2011 -0700"
      },
      "message": "toro: add radio permission for bridge driver node file\n\n1. Add radio permission for \u0027/dev/modem_br\u0027\n\t- ril needs to flow control, protocol-suspend(stop) and protocol-resume(start)\n\t- this is for ioctl func that ril will access\n\nChange-Id: I22049defff1f4a876df960b93392355a51cf2c4a\nSigned-off-by: wonhee \u003cwonhee48.seo@samsung.com\u003e\n"
    },
    {
      "commit": "d6e44ab93744db453622edd74f03cf64fb94865a",
      "tree": "71e9f8973b9bb1b0145967f93817d0dec541977c",
      "parents": [
        "060fb371ad8928d1b3f074dd88f0723810465a58",
        "be91eb28b217062011a62704cfb13046882b2e45"
      ],
      "author": {
        "name": "Jeff Brown",
        "email": "jeffbrown@google.com",
        "time": "Thu Aug 11 18:47:44 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Thu Aug 11 18:47:44 2011 -0700"
      },
      "message": "Merge \"Add touch screen configuration.\""
    },
    {
      "commit": "8c5c452c89071cb2880b6af6cf4c727f68b623ad",
      "tree": "9bf16bf405f6a9d0d8125339838921f7ad5aa08b",
      "parents": [
        "fb0c56aef472011fa7ada903d07c6854390085e5"
      ],
      "author": {
        "name": "John Huang",
        "email": "jsh@google.com",
        "time": "Thu Aug 11 18:23:13 2011 -0700"
      },
      "committer": {
        "name": "John Huang",
        "email": "jsh@google.com",
        "time": "Thu Aug 11 18:23:13 2011 -0700"
      },
      "message": "Add networkAttributes for fota, ims and cbs.\n\nbug: 5097236\nChange-Id: I9da358281ba477fe1260a2696c44592bdb291d1b\n"
    },
    {
      "commit": "be91eb28b217062011a62704cfb13046882b2e45",
      "tree": "0a53eedfba56cc120c7c6207ee806ef050fffcb4",
      "parents": [
        "677ae1939c62d283d1afab9b461ed03a8334a5ea"
      ],
      "author": {
        "name": "Jeff Brown",
        "email": "jeffbrown@google.com",
        "time": "Thu Aug 11 18:22:16 2011 -0700"
      },
      "committer": {
        "name": "Jeff Brown",
        "email": "jeffbrown@google.com",
        "time": "Thu Aug 11 18:22:16 2011 -0700"
      },
      "message": "Add touch screen configuration.\n\nChange-Id: Ied45401d021feb95dd6ac7daf79421722a3f3ab3\n"
    },
    {
      "commit": "060fb371ad8928d1b3f074dd88f0723810465a58",
      "tree": "1ca26637a205da1e5442047e0ad140a5d703ee98",
      "parents": [
        "8b268891324bf3adc301bf44880f35a23e8ab90c"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Aug 11 17:41:07 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Aug 11 17:41:07 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n7ebda11 ARM: omap4: tuna: zero out remoteproc dynamic carveout\n07650ae ARM: omap4: tuna: relocate and resize carveout memories\n41a6c79 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n486efb7 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nb401f83 modem_if: usb_link: modify regarding suspend_count\n2f89b6b rpmsg: omx: transmit the virtual address\nab1b469 rpmsg: omx: transmit remote processor virtual address\n3606ddb omap4: rpmsg: assign vring buffers from static pool\n5f8514d omap: remoteproc: update the suspend addr data\naaddeab OMAP4: SDP/Panda: relocate and resize carveout memories\n6de54d0 remoteproc: fix an off-by-one error in static-pool range check\n36f1c27 Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n9afc88f ASoC: twl6040: Change from hp to lp constraints\nfcf4f6c misc: modem_if: Add newline terminators to messages\n\nChange-Id: Ib13b1a58c3dbe29466d38e6e417b240cfce5220a\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "8b268891324bf3adc301bf44880f35a23e8ab90c",
      "tree": "8c887e94cc13bf55d731dd466565c1b47838a5db",
      "parents": [
        "677ae1939c62d283d1afab9b461ed03a8334a5ea"
      ],
      "author": {
        "name": "sinikang",
        "email": "sinikang@samsung.com",
        "time": "Wed Aug 10 22:09:02 2011 -0700"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Thu Aug 11 15:53:05 2011 -0700"
      },
      "message": "Toro : Add radio permission on \"/sys/bus/usb/devices/usb1/power/control\"\n\nfor LTE Host Booting fix.\n- ril control enable/disable \"auto-suspend\" feature in HostBooing procedure.\n- releated ril code is already submitted in LTE RIL version to 4.0\n\nSigned-off-by: sinikang \u003csinikang@samsung.com\u003e\nChange-Id: If7b882ca02ecf1fd696bef3a59db82f0be8b51b3\n"
    },
    {
      "commit": "677ae1939c62d283d1afab9b461ed03a8334a5ea",
      "tree": "aaff5df5cde96ace5d661cff103a488bbe2c629d",
      "parents": [
        "ed31e5e8a74421bfb88505b4002c8b6e6a91d5f9"
      ],
      "author": {
        "name": "Sarthak Aggarwal",
        "email": "sarthak@ti.com",
        "time": "Thu Aug 11 10:19:15 2011 +0530"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Aug 11 11:09:48 2011 -0700"
      },
      "message": "Fix permissions for ION driver\n\nChange-Id: I34890cc1b08b33222bea30e73080e4a529117d75\nSigned-Off-By: Sarthak Aggarwal\u003csarthak@ti.com\u003e\n"
    },
    {
      "commit": "ed31e5e8a74421bfb88505b4002c8b6e6a91d5f9",
      "tree": "28d15a1f851225caccec9d20182bb261fe72c243",
      "parents": [
        "e9108a45edd8e19dcc22e55c343f3fd9231ef361"
      ],
      "author": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Wed Aug 10 23:29:18 2011 -0700"
      },
      "committer": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Wed Aug 10 23:30:29 2011 -0700"
      },
      "message": "Updated kernel prebuilt\n\n41f3faf Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n33b439b Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n50a7553 OMAP4: twl6030: Add V2V1 SMPS\n3c1f4c5 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n92c1f6b Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\na6667d2 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\n6ba1c70 Merge commit \u0027v3.0.1\u0027 into linux-omap-3.0\n9abd59b Merge commit \u0027v3.0.1\u0027 into android-3.0\n97819f6 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n6584543 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n475fb9a Merge branch \u0027android-3.0\u0027 into android-omap-3.0\nd2c3c40 Merge commit \u0027v3.0\u0027 into linux-omap-3.0\n4e11175 Merge commit \u0027v3.0\u0027 into android-3.0\n6ae128e Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n3083b10 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\nf998362 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nca64b0c PM: wakelocks: Display wakelocks preventing suspend by default\n526bc12 ARM: omap4: correct dsp opp data again\n88c51f3 Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\neb5a1c1 ASoC: ABE: reset ABE SRC filters when (un)muting MODEM BE\n10ac20a ASoC: ABE: Detect Vx UL-DL input filters saturation\ne9a2aa4 ASoC: ABE: Add APIs to reset ABE SRCs\n76b545f ASoC: McPDM: Combine channels management for UL and DL\n3f24fc4 ASoC: ABE DSP: Dettach OPP calculation and scale\n8a3eea6 ARM: omap4: tuna: add mhl bridge to defconfig\n4d9f23e ARM: omap4: tuna: add mhl support to board files\n12847ae video: add sii9234 MHL bridge driver\n6789369 fsa9480: add proxy wait handler\n4e49471 OMAP: PM: Set device name for L3 minimum throughput DVFS request\n\nChange-Id: I6c07019122afcadef922dca2ed658fba1d143317\n"
    },
    {
      "commit": "e9108a45edd8e19dcc22e55c343f3fd9231ef361",
      "tree": "8f448df3d2a92c36651148f39b9338e79cc1eebd",
      "parents": [
        "8bbd2d2b578915912bbb97091ffda8a2ad629128"
      ],
      "author": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Wed Aug 10 00:39:42 2011 -0700"
      },
      "committer": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Wed Aug 10 00:39:42 2011 -0700"
      },
      "message": "Updated kernel prebuilt\n\nc461984 ARM: omap4: tuna: Enable OSWR in defconfig\n9d85f15 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n8676165 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\ne65d9fe usb: otg: add proxy_wait handler to otg_id\nf3d9cdd netfilter: xt_qtaguid: recognize IPV6 interfaces. root is procfs privile\n468d36c netfilter: xt_qtaguid: add counter sets and matching control\n4113f8d net: wireless: bcmdhd: Fixing memory leak problem in wl_get_ies\n7774bc6 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n044df6e Merge branch \u0027android-3.0\u0027 into android-omap-3.0\n3fe2436 ion: minor clean up\n89c65d6 Bluetooth: Fixed wrong L2CAP Sock timer value\n\nChange-Id: I33c2ecdbd6d86480f63e2046fd60ff7d6f51f694\n"
    },
    {
      "commit": "8bbd2d2b578915912bbb97091ffda8a2ad629128",
      "tree": "4f4b6de44c1fd77f1573ba725fa3800af4225969",
      "parents": [
        "393d0a814d74085d5c9510456390cacced7e74cd"
      ],
      "author": {
        "name": "Eric Laurent",
        "email": "elaurent@google.com",
        "time": "Sun Aug 07 09:57:42 2011 -0700"
      },
      "committer": {
        "name": "Eric Laurent",
        "email": "elaurent@google.com",
        "time": "Tue Aug 09 16:56:36 2011 -0700"
      },
      "message": "audio HAL: added support for TTY feature.\n\nChange-Id: Ia38d9bea3c9abcd1ea505e7302382cb9f6b016c2\n"
    },
    {
      "commit": "393d0a814d74085d5c9510456390cacced7e74cd",
      "tree": "bbd92fd0b2ecfb91a2783682a21363a2f12579db",
      "parents": [
        "8f35a34b4d9ad7d752e83ef44a741106ac70a008"
      ],
      "author": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Tue Aug 09 14:58:01 2011 -0700"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Tue Aug 09 15:08:44 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\na8d8a39 modem_if: usb_link: Request auto-suspend on resume\n39f8185 modem_if: usb_link: Improve power management\n3398dae modem_if: usb_link: Add LTE modem wake platform device\n464898f modem_if: usb_link: implemented usb anchor list\n116c8a7 OMAP4: Tuna: Fix DSI Interleaving CIO Bus Contention Errors\nc38238d toro: modem_if: Fix wrong numbering array for cdma io devices.\ndad78ac modem_if: usb_link: set usb_mark_last_busy at usb_rx\n75d453b Modem_if: usb_link: Remove Host active gpio low in disconnect function\n\nChange-Id: Iab603acb4e9f25378ba3b8d0cd954020d16bf54b\n"
    },
    {
      "commit": "8f35a34b4d9ad7d752e83ef44a741106ac70a008",
      "tree": "73ef7ab93fe000474df6679a8af2de81b390fe8d",
      "parents": [
        "f2f0dcc7058f6f074dc23de5cf5375de0c2ca596"
      ],
      "author": {
        "name": "Eric Laurent",
        "email": "elaurent@google.com",
        "time": "Thu Aug 04 10:47:36 2011 -0700"
      },
      "committer": {
        "name": "Eric Laurent",
        "email": "elaurent@google.com",
        "time": "Tue Aug 09 11:27:04 2011 -0700"
      },
      "message": "audio HAL: implement microphone mute.\n\nThis fixes issue 5099308: AudioManager.isMicrophoneMute() always returns true on Prime.\n\nChange-Id: I7edf7aade2f46725e1fa9685744f21d63a4529a6\n"
    },
    {
      "commit": "f2f0dcc7058f6f074dc23de5cf5375de0c2ca596",
      "tree": "9889022b1815ccf8633a620a49a53c9a18f94383",
      "parents": [
        "a25c2e62c0659e9348561da047494d26c37f8dc2"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 08 21:19:07 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Tue Aug 09 10:19:20 2011 -0700"
      },
      "message": "audio: route to sub mic for audio capture\n\nChange-Id: I5b3ef5b111bb4b50fd6d2100f0ed34f47f85cbe3\n"
    },
    {
      "commit": "a25c2e62c0659e9348561da047494d26c37f8dc2",
      "tree": "7ba913940f883c26d945d5c0bee111fb8e929fe1",
      "parents": [
        "c31e6f1ded318a1c49a2bf4272aabcf80793138c"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 08 19:57:43 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Tue Aug 09 09:17:45 2011 -0700"
      },
      "message": "audio: fix mic path when headphones are used\n\nFixes bug 5118167 - when headphones without a mic are connected,\nuse the main microphone during a voice call.\n\nChange-Id: I846d923d71e88e65adf43001ab13a4d1927a696d\n"
    },
    {
      "commit": "c31e6f1ded318a1c49a2bf4272aabcf80793138c",
      "tree": "9475ad8e7db934b4829e45f0efddd9b053d588dc",
      "parents": [
        "c1537c5139c1a566e35a9ab77f130aee4882ed4b"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Mon Aug 08 22:14:47 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Mon Aug 08 22:14:47 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n4672ad3 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n4f0979b Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n90f4f27 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\ned27e53 PM: wakelocks: Don\u0027t report wake up wakelock if suspend aborted\ne64a34a tuna_defconfig: enable CONFIG_INET_XFRM_MODE_TUNNEL.\n3e4d744 rpmsg: fix result check on wait_event_interruptible_timeout\n7cff5c5 OMAP4: PM: Print MPU PRCM interrupt status if no I/O pad wakeups\nc0b9aea mfd: twl6030: fix lockdep recursion warning on setting wake IRQs\n7ea0c16 toro: modem_if: use standard mux framework\nd40660f misc: modem_if: Change logic checking ip version.\n\nChange-Id: I2862228d026673b7877e0f508fcfdb959960fdaf\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "c1537c5139c1a566e35a9ab77f130aee4882ed4b",
      "tree": "f0178848b8f15cdd3d9a10699b896346280279b5",
      "parents": [
        "3cd7fb78ceea3b55bafa6e8af0f0b3ea2db75ef5",
        "aa0ea31566cca14a3a057f9f241c72e304e029f1"
      ],
      "author": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Mon Aug 08 19:24:23 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Mon Aug 08 19:24:23 2011 -0700"
      },
      "message": "Merge \"Add libdumpstate.tuna\""
    },
    {
      "commit": "3cd7fb78ceea3b55bafa6e8af0f0b3ea2db75ef5",
      "tree": "2bea5ad2562a5746c64ccd223780fbac92440033",
      "parents": [
        "d8b177f2ce54f8927f8dc0faa05e7c2df4fdb183",
        "975e915dae0414e54decaa9f1fe3786ee5fbd87d"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 08 18:06:11 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Mon Aug 08 18:06:11 2011 -0700"
      },
      "message": "Merge \"audio: use sub mic for handsfree voice calls\""
    },
    {
      "commit": "975e915dae0414e54decaa9f1fe3786ee5fbd87d",
      "tree": "f87e9847be7b1dc29acc6cd3bc2992f3e4ee4585",
      "parents": [
        "41694793e06f9198684f9deaeff1a7bdcc4c39c9"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 08 16:15:45 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 08 16:21:49 2011 -0700"
      },
      "message": "audio: use sub mic for handsfree voice calls\n\nUsing the sub mic is necessary to avoid echo due to the physical\nplacement of the main mic.\n\nChange-Id: I716db818ec439d812f162b3f4170195c98c51539\n"
    },
    {
      "commit": "aa0ea31566cca14a3a057f9f241c72e304e029f1",
      "tree": "33949e5d6d7b858ac9cd2e4bd8e342ba60732605",
      "parents": [
        "fb0c56aef472011fa7ada903d07c6854390085e5"
      ],
      "author": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Mon Jul 18 17:00:07 2011 -0700"
      },
      "committer": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Mon Aug 08 15:03:11 2011 -0700"
      },
      "message": "Add libdumpstate.tuna\n\nAdd libdumpstate.tuna, which gets statically linked into dumpstate\nto dump tuna-specific debugging information.\n\nChange-Id: Ib7514f47f6ca7187c6f9f4f4fe30068141796da4\n"
    },
    {
      "commit": "d8b177f2ce54f8927f8dc0faa05e7c2df4fdb183",
      "tree": "f6c5ed52e430ef6d873939d9b1df2c774ae93f84",
      "parents": [
        "1626798632073c46c9813e8f8482057e726f78fc",
        "c1a8eb8c61bb84a0548f59a144f0948b69a81edd"
      ],
      "author": {
        "name": "Dmitry Shmidt",
        "email": "dimitrysh@google.com",
        "time": "Mon Aug 08 12:37:32 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Mon Aug 08 12:37:32 2011 -0700"
      },
      "message": "Merge \"tuna: update wlan calibration file\""
    },
    {
      "commit": "1626798632073c46c9813e8f8482057e726f78fc",
      "tree": "7f476f1d44c290a6e09c6ef33e4b16f5c2d039fa",
      "parents": [
        "41694793e06f9198684f9deaeff1a7bdcc4c39c9"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Mon Aug 08 11:33:59 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Mon Aug 08 11:33:59 2011 -0700"
      },
      "message": "tuna: update with new location of omap4 open-source code\n\nChange-Id: I1095e18d5cbfe2557c7b26d014debbf81a0b215a\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "c1a8eb8c61bb84a0548f59a144f0948b69a81edd",
      "tree": "5a7e64bd1b1dfd539566450574551a0eea7a3445",
      "parents": [
        "41694793e06f9198684f9deaeff1a7bdcc4c39c9"
      ],
      "author": {
        "name": "jun.ho.lee",
        "email": "jun.ho.lee@samsung.com",
        "time": "Sat Aug 06 09:03:00 2011 +0900"
      },
      "committer": {
        "name": "Dmitry Shmidt",
        "email": "dimitrysh@google.com",
        "time": "Mon Aug 08 10:27:32 2011 -0700"
      },
      "message": "tuna: update wlan calibration file\n\n- Modify PA parameters / 2G,5G PA offset / 5GHz LOFT and IQ CAL\n- Add 5GHz Noise CAL parameter / 2GHz RxPER at low rates\n- Add Max input level on a-band / Tx power control\n\nChange-Id: Id7aa3246066c7a729da7c26c3d161131fa6d582e\nSigned-off-by: jun.ho.lee \u003cjun.ho.lee@samsung.com\u003e\n"
    },
    {
      "commit": "41694793e06f9198684f9deaeff1a7bdcc4c39c9",
      "tree": "b83685113fb906ea1497611f1e956d128a2ef902",
      "parents": [
        "fb0c56aef472011fa7ada903d07c6854390085e5",
        "99d8442f1b2104dd80c405b11bb1f87dd59f7169"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Sun Aug 07 22:45:11 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Sun Aug 07 22:45:11 2011 -0700"
      },
      "message": "Merge \"tuna: update prebuilt kernel\""
    },
    {
      "commit": "99d8442f1b2104dd80c405b11bb1f87dd59f7169",
      "tree": "ea3bb2f2380ada93572eed79353e959eaa0b571a",
      "parents": [
        "fed0dce065b557708321a97b7378a27ad4211582"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Sun Aug 07 22:15:34 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Sun Aug 07 22:15:34 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n30f2d73 Revert \"omap: rpres: reset device before shutdown\"\n1ffb3cd Revert \"rpmsg: omx: add safety removal of devices\"\n97dd76c Revert \"omap: rpmsg: reset rpmsg devices after fatal error\"\n7821feb ARM: omap4: tuna: Add /sys/board_properties/revision\n9b68570 ARM: omap4: tuna: Add 4th sample revision names\n583a03e Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nb2e4a4b rpmsg_omx: remove unused field\nf902447 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\nb7a82d4 net: wireless: bcmdhd: Fix CFG80211 memory corruption\n55fd0d6 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n9fbe62f omap: rpres: reset device before shutdown\nc490b17 rpmsg: omx: add safety removal of devices\n1580269 omap: rpmsg: reset rpmsg devices after fatal error\nc265b07 remoteproc: block rproc_get after a crash\n5abaf5c modem_if: usb_link: Don\u0027t runtime resume device during system suspend\n26b298d Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\nd11a4d4 ASoC: SDP4430: Configure modem DAI in frontend PCM ops\n\nChange-Id: I97faa0659232f4dbd27d124c336844b61cfb6627\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "fb0c56aef472011fa7ada903d07c6854390085e5",
      "tree": "fb4cc9d9a81415a662a26ac05f573eb33205d0e9",
      "parents": [
        "fed0dce065b557708321a97b7378a27ad4211582",
        "e522d0eeea3c764e35b6a2440de7051bda953b16"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Fri Aug 05 12:59:34 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Fri Aug 05 12:59:34 2011 -0700"
      },
      "message": "Merge \"audio: use 0dB gain for all mixers\""
    },
    {
      "commit": "fed0dce065b557708321a97b7378a27ad4211582",
      "tree": "7b2615ea95576669c7d676668ced8cd08b6ebb15",
      "parents": [
        "348f826087c3e05064c330bd0306f8be8bcd1ba0"
      ],
      "author": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Thu Aug 04 22:19:18 2011 -0700"
      },
      "committer": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Thu Aug 04 22:19:18 2011 -0700"
      },
      "message": "Updated kernel prebuilt\n\nec3b16d Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nb0075af Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n3d4e1b0 misc: omap_temp_sensor: prevent idle disables before probe\n6afef8d Revert \"OMAP4: Panda/SDP: Enable MMC power saving\"\n0782dc7 ARM: omap4: panda: enable updated USB and Ethernet support.\nc816016 ARM: omap4: tuna: export a uart_sel gpio to switch a uart (AP/CP)\n\nChange-Id: I49616625d753db234c3434ceeb60fcaafd0c81f3\n"
    },
    {
      "commit": "348f826087c3e05064c330bd0306f8be8bcd1ba0",
      "tree": "7054bf9361d9c967e844421da207fe5fb3cc43b4",
      "parents": [
        "55fd396fd4117b4b9b1442d04bbcd6a78f5a25cf"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Aug 04 17:36:10 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Aug 04 17:39:48 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n6743a2e ARM: omap4: tuna: Add temperature sensors to defconfig\nbca4426 HACK: ARM: omap4: opp: disable MPU 1.5 GHz OPP\n8a8d0b7 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nc516939 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n352308d Merge branch \u0027android-3.0\u0027 into android-omap-3.0\na1c6505 ARM: omap: temperature_sensor: Fix build when temperature sensor disabled\n67a41d9 OMAP:DSSCOMP: Switch to dsscomp_setup_dispc_data\n7155b2f OMAP:DSSCOMP: Add structure to set the configuration of all displays\n69b09f2 OMAP4: OPP: Enable higher frequency\n02bad8c ARM: omap4: enable 1.2 GHz on 1.5 GHz devices\n89e6e3f Add temperature sensor IDLE calls to the idle path\n525609a Add OMAP on die temp sensor support\n4ea6b89 ipv6: updates to privacy addresses per RFC 4941\n909ae43 OMAP4: Add temp sensor HWMOD data\na947d17 OMAP2: Add temp sensor device file\nc578afb OMAP: add bandgap #defines to the control module\nada6f65 OMAP:Clock data for the on-die temp sensor\nec4dedf OMAP: HWMOD data for the on-die temp sensor\ne817713 cpufreq: omap2plus: add thermal throttling\n9d04528 ARM: omap4: tuna: set mux and gpio for mics\n0067189 HACK: ASoC: sdp4430: add widget for main and sub mic\nf44baeb net: wireless: bcmdhd: Ensure struct semaphore to be defined\n620f241 net: wireless: bcmdhd: Keep debug symbols for built-in driver\n22daafe net: wireless: bcmdhd: Clean up formatting.\nd61bb6e rpmsg_omx: move omx_packet to header\nacb05ef remoteproc: reset the memory pool and memory maps\nd223ba1 rpmsg: serialize concurrent access to svq buffers\n9dfaab0 Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n8235f85 ASoC: ABE DSP: Add controls for DL1, DL2, AUDUL mono mixers\ne73dcb5 ASoC: OMAP ABE: Firmware version 09.46\n746f132 ASoC: ABE: Reload equalizer coeffs during context restore\nb00dc74 ASoC: ABE DSP: Fixes for firmware equalizer parsing\na196bac ASoC: ABE DSP: Share firmware strategy for built-in and modules\necffea2 ASoC: ABE HAL: Allow flexible firmware loading\n1f16466 OMAP4: AESS: Move device creation to mach-omap2\n02f6cc0 OMAP4: McPDM: Move device creation to mach-omap2\n6d7ac58 Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n41ce48e ASoC: ABE DSP: Add OPP scaling\n\nChange-Id: I6560f1e39034c2f5f75d8c95c34492d64fec8798\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "55fd396fd4117b4b9b1442d04bbcd6a78f5a25cf",
      "tree": "b298835dcb61eef598290dd81771eb5567025acd",
      "parents": [
        "ff72cd007a27f550636c918a01512bb7f9c3f4dd"
      ],
      "author": {
        "name": "Paul Eastham",
        "email": "eastham@google.com",
        "time": "Thu Aug 04 11:45:35 2011 -0700"
      },
      "committer": {
        "name": "Paul Eastham",
        "email": "eastham@google.com",
        "time": "Thu Aug 04 11:45:35 2011 -0700"
      },
      "message": "New Prime prebuilt\n\n6adc02e Revert \"Revert \"ARM: tuna: modems: Enable wakeup from cdma modem\"\"\n\nChange-Id: I11ca86043425744d86c07e32009f35eb1a348c3e\n"
    },
    {
      "commit": "ff72cd007a27f550636c918a01512bb7f9c3f4dd",
      "tree": "e5285c948466c5c52015235f40fcd618b0cccc1a",
      "parents": [
        "0d39e4171299ce81f91e507768c6c4d36edb749b"
      ],
      "author": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Wed Aug 03 14:59:56 2011 -0700"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Wed Aug 03 18:13:11 2011 -0700"
      },
      "message": "Update kernel prebuilt\n\n2db03a6 toro: modem_if: Add DM Port Io-Device.\nf0d140f modem_if: usb_link: enable_irq_wake regarding LTE2AP wakeup\n604da96 ARM: omap4: tuna: Set  LTE_HOST_WAKEUP GPIO  to wakeup source GPIO.\n5045c1c OMAP: DSS: panel-s6e8aa0: Add debugfs file to adjust gamma table\ncf9ac51 OMAP: DSS: panel-s6e8aa0: Compute pentile gamma table\n7b47bd7 OMAP: DSS: panel-s6e8aa0: Recompute voltage from register value\nfd8026c Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nbcf4fd3 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n7c470fd Merge branch \u0027android-3.0\u0027 into android-omap-3.0\nafe97e3 Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\nf0b7017 ASoC: dsp: Free widget_list only if paths found\nfad3d22 ASoC: DSP: Connect FE-\u003eBE links if FE is active\n043cda2 net: wireless: bcmdhd: Improve arp_hostip_table processing\n7d64f70 net: wireless: bcmdhd: Eliminate nested IOCTL call\nbbd665d Revert \"ARM: omap4: tuna: Set  LTE_HOST_WAKEUP GPIO  to wakeup source GPIO.\"\n30c6ec0 Revert \"modem_if: usb_link: enable_irq_wake regarding LTE2AP wakeup\"\n3be92da Revert \"ARM: tuna: modems: Enable wakeup from cdma modem\"\n\nChange-Id: I58e347dcfa4d97e0ba01f5ab3ab477942017dfcb\n"
    },
    {
      "commit": "e522d0eeea3c764e35b6a2440de7051bda953b16",
      "tree": "21bcc1f3965a2d6443be3a19266f847914e6b5ff",
      "parents": [
        "0d39e4171299ce81f91e507768c6c4d36edb749b"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Wed Aug 03 11:23:38 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Wed Aug 03 11:23:41 2011 -0700"
      },
      "message": "audio: use 0dB gain for all mixers\n\nA mixer gain of 118 (-2dB) was used to avoid noise caused by\nsaturation in the ABE. However, this has been fixed with ABE\nfirmware 9.46, so these gains can be restored to 0dB for\nmaximum dynamic range.\n\nChange-Id: Id6a6ae5faeac8673faad3444d5e46e6469d5bd2d\n"
    },
    {
      "commit": "0d39e4171299ce81f91e507768c6c4d36edb749b",
      "tree": "a5b3b553633afb629d3c705855168733533f76d7",
      "parents": [
        "b69bbd35895571b7321813672686fff3c85c6204"
      ],
      "author": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Tue Aug 02 22:17:10 2011 -0700"
      },
      "committer": {
        "name": "Colin Cross",
        "email": "ccross@android.com",
        "time": "Tue Aug 02 22:26:20 2011 -0700"
      },
      "message": "Update kernel prebuilt\n\n80e8510 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nf61b82f Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n3a019b9 Merge branch \u0027linux-omap-pm-3.0\u0027 into linux-omap-3.0\na08b423 OMAP4-SGX: Correct SGX OPP2 entry in omap443x OPP list.\n984a6db Merge branch \u0027omap-pm-integration\u0027 of git://github.com/nmenon/linux-omap\n7e07835 OMAP4: PM: TPS: map the TWL6030 SYSEN TRANS CFG reg as well\nf27c229 OMAP4: PM: TPS: setup ACT2SLP in OFF mode and SLP2ACT from TWL6030\nd6e61f7 HACK: move the pm_is_ready to beyond pmxx.c\ne4d7c1b OMAP4430: OPP data: update voltages to spec rev 0.5\n9cb431e OMAP4460: OPP data: update voltages to spec rev 0.2\n20e656b OMAP4: OPP: Add OPPs for AESS\n3fa8ebf OMAP3+: PM: DVFS: remove typo entry with !CONFIG_PM\n377561c OMAP3+: PM: DVFS: scale only target_device freq when list is empty\n967f02c OMAP4460: OPP data: correct core voltage typo for fdif and dsp\n\nRe-merged backports that were already in the tuna kernel:\nfbfb5e6 OMAP: HSI: fix build error in HSI protocol\ndf0ce11 [ARM] mach-omap2: add missing __init/__initdata annotations\nd7132e8 ARM: omap: panda: set DVI output to 720p\n24a1ce2 OMAP4: HSI: fix hsi IO wakeup missed events\n50614a9 OMAP4: hwmod data: Add MSTANDBY_SMART_WKUP for HSI\n8472131 OMAP4: HSI: add HSI OPP definition\nf295c8b ARM: omap4: enable hsi hwmod\n\nChange-Id: I943020c2fcc5e6c85cc068e8d2cde04e7a695d95\n"
    },
    {
      "commit": "b69bbd35895571b7321813672686fff3c85c6204",
      "tree": "534a6d26ddc22cd58080745b7d211bd59c93b1bc",
      "parents": [
        "2531135ddb1104f7a22623f49ca63b0c68e3051f"
      ],
      "author": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Tue Aug 02 21:58:50 2011 -0700"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Tue Aug 02 21:59:08 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\na15cadb ARM: omap4: tuna: Update oled factory calibration info\nd094958 OMAP: DSS: panel-s6e8aa0: Add two stage gamma table\n76d6d57 OMAP: DSS: panel-s6e8aa0: Remove v0 and v255 gamma_adj_points\nf856f9c ARM: tuna: modems: Enable wakeup from cdma modem\nd5fb16f modem_if: usb_link: enable_irq_wake regarding LTE2AP wakeup\n22d1d31 ARM: omap4: tuna: Set  LTE_HOST_WAKEUP GPIO  to wakeup source GPIO.\n\nChange-Id: I79672ce536d6f49786b80be6089ddb8e3d15365d\n"
    },
    {
      "commit": "2531135ddb1104f7a22623f49ca63b0c68e3051f",
      "tree": "f42fde240fac522c20d0d69c660a96622016a881",
      "parents": [
        "4274dd4a475e98a8a2c04043481965ac4ea53c81"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Tue Aug 02 19:36:52 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Tue Aug 02 20:02:24 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n788a790 OMAP4: Tuna: Single step ramp for twl6040 earphone\n4b7d34b Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n0b262f5 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\na1b459f Merge branch \u0027android-3.0\u0027 into android-omap-3.0\n260e065 gpu: pvr: Update to DDK 1.8@273945\nf40692e gpu: pvr: Update to DDK 1.8.18.964\nd91993a omap: return -EIO instead of -EFAULT in iommu_set_da_range\nd3489bf remoteproc: return -EIO instead of -EFAULT from fault ISR\n93ea514 rpmsg: clean up error codes\n55981a5 rpmsg_omx: enable mapping for metadata buffers\n50537e7 OMAP4: PM: PRCM debug: Fixup DPLL status reporting\na8a145c net: wireless: bcmdhd: Remove noisy debug prints\nace1a5b net: wireless: bcm4329: Remove obsolete file\n60bd997 net: wireless: bcmdhd: add support for mkeepalive. Fix p2p group add issue. Change-Id: Ieb8fba54e04912b4002837243c00ba90fd150e5d Signed-off-by: Howa\n5b11863 net: wireless: bcmdhd: Check wldev_ioctl() for NULL parameter\nb0ebe79 Bluetooth: l2cap: Fix lost wakeup waiting for ERTM acks\n1a86ece Bluetooth: bnep: Fix lost wakeup of session thread\nd758107 Bluetooth: sco: Fix lost wakeups waiting to accept socket\n4e20b5e Bluetooth: l2cap: Fix lost wakeups waiting to accept socket\nf0ec22e Bluetooth: Fix lost wakeups waiting for sock state change\ne7a40bf Bluetooth: rfcomm: Fix lost wakeups waiting to accept socket\na2aa662 Bluetooth: rfcomm: Remove unnecessary krfcommd event\n173c187 ARM: omap4: tuna: CLK32KG is used by GPS, leave it on\n9b563c8 Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n58ef152 ASoC: twl6040: Detach gains and GPOs init from bias setting\n496ea6d ASoC: twl6040: Add ramp up/down volume for earphone\ne13ef64 ASoC: twl6040: Use SOC_DOUBLE_*_EXT_TLV for HS/HF gains\nd177960 remoteproc: fix tracing with the new memory map changes\n6fc3820 OMAP: DSS: panel-s6e8aa0: Speed up brightness update\ndfe4e43 misc: inv_mpu: add interface to get offset regs.\nfaf77bd modem_if: usb_link: Use level-triggered IRQs\n9cbbd45 OMAP4: PM: Print non-wakeup GPIO IRQs if no wakeups found\na47f3df OMAP4: PM: Print localtimer as \"wakeup IRQ\"\n773e829 OMAP4: PM: Print I/O pad wakeups at system resume\ndb8c260 OMAP4: PM: PRCM power state debugging\n\nChange-Id: I4f2fdd8daf3c329fa8d62823102ade05628b50f6\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "4274dd4a475e98a8a2c04043481965ac4ea53c81",
      "tree": "3d9e9546ca9193f4e73629419877b71f03d03433",
      "parents": [
        "1cd93b9b2614d635f2ee42fc320519f5e40d34a9"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Tue Aug 02 11:07:55 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Tue Aug 02 17:42:42 2011 -0700"
      },
      "message": "audio: rename earpiece enable control name\n\nIn the latest ASoC kernel code, the earpiece enable control name\nhas been renamed. Make the corresponding change in the HAL and\nprint an error if all controls are not found to aid debugging.\n\nChange-Id: Idc56c383ab9d7b45afad4f54c02237cc4d0db236\n"
    },
    {
      "commit": "1cd93b9b2614d635f2ee42fc320519f5e40d34a9",
      "tree": "6461afc3bd29d3355043aee6ab087300b5adb9b7",
      "parents": [
        "c0a5ada0eddc2e7d2dedcbe6590dc264cc3ef980"
      ],
      "author": {
        "name": "Romain Guy",
        "email": "romainguy@google.com",
        "time": "Tue Aug 02 16:34:43 2011 -0700"
      },
      "committer": {
        "name": "Romain Guy",
        "email": "romainguy@google.com",
        "time": "Tue Aug 02 17:04:17 2011 -0700"
      },
      "message": "Disable marquee fading edges\n\nChange-Id: I468541c3dbe841ea220f5bca6169cdca00e420ca\n"
    },
    {
      "commit": "c0a5ada0eddc2e7d2dedcbe6590dc264cc3ef980",
      "tree": "46891c2a2df4cfc8766efbc530726096b4db0f34",
      "parents": [
        "04949c46043a1540af4817680a87ef6d1e704520",
        "d09277c7b37b3185d5645fa4547c95f7846c2be4"
      ],
      "author": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Tue Aug 02 14:46:15 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Tue Aug 02 14:46:15 2011 -0700"
      },
      "message": "Merge \"Enable dhcpd and iprenew for bluetooth.\""
    },
    {
      "commit": "d09277c7b37b3185d5645fa4547c95f7846c2be4",
      "tree": "c7bbab37a0bdb572b543642e5475989f5cd9dd5a",
      "parents": [
        "0259946b0e8692d51fcde0c6167c43de57d150c2"
      ],
      "author": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Tue Aug 02 12:55:00 2011 -0700"
      },
      "committer": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Tue Aug 02 14:33:27 2011 -0700"
      },
      "message": "Enable dhcpd and iprenew for bluetooth.\n\nChange-Id: I9d2f8a8ce61a739073bc90f8ce03ea42e4fb73e8\n"
    },
    {
      "commit": "04949c46043a1540af4817680a87ef6d1e704520",
      "tree": "4dc540db45ff3a59a1243a749a52ad02dfee4977",
      "parents": [
        "9fd045d0e87a7ab32139e3c625df926a2f04327a",
        "0259946b0e8692d51fcde0c6167c43de57d150c2"
      ],
      "author": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Tue Aug 02 14:32:25 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Tue Aug 02 14:32:25 2011 -0700"
      },
      "message": "Merge \"Add tethering and connectivity manager options.\""
    },
    {
      "commit": "0259946b0e8692d51fcde0c6167c43de57d150c2",
      "tree": "847877b2fc004a2197f0ba01e4771bc3ae60c112",
      "parents": [
        "3f62ba0c063d1aae554e7c81ffe85fc735e86fbb"
      ],
      "author": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Tue Aug 02 11:34:10 2011 -0700"
      },
      "committer": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Tue Aug 02 11:34:10 2011 -0700"
      },
      "message": "Add tethering and connectivity manager options.\n\n1. Add BT, USB tethering\n2. Add connectivity manager coex options.\n\nIf any of these change in the device variants, these need to be moved\nto device variant files.\n\nChange-Id: I4174462a1383e25c44225e2ef14eb52e00e1c9ed\n"
    },
    {
      "commit": "9fd045d0e87a7ab32139e3c625df926a2f04327a",
      "tree": "bc9af7f97376724b69829f60d31a16d3a99e217c",
      "parents": [
        "df3acbd4cfe191376bb0986d1aa0d7d0d9e30bdd",
        "9ce8ae7e68be18cee9b74bbb5102a142f02f46da"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 01 20:32:39 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Mon Aug 01 20:32:39 2011 -0700"
      },
      "message": "Merge \"audio: add input routing support\""
    },
    {
      "commit": "9ce8ae7e68be18cee9b74bbb5102a142f02f46da",
      "tree": "d02fa9378f78fe45c143dc9efac19e903c76efbf",
      "parents": [
        "067d752fd7f7dfaa73dadf3bb9e2f76cf8ff1b1e"
      ],
      "author": {
        "name": "Chris Kelly",
        "email": "c-kelly@ti.com",
        "time": "Mon Jul 18 19:11:58 2011 -0500"
      },
      "committer": {
        "name": "Eric Laurent",
        "email": "elaurent@google.com",
        "time": "Mon Aug 01 18:40:38 2011 -0700"
      },
      "message": "audio: add input routing support\n\ninput routing supports switching between MM_UL2/VX_UL\nsupported capture paths main mic, sub mic, headset mic and BT.\n\nIf in call, the input is selected based on the current ouput device.\nThis also manages the selected device per stream.\n\nSub-mic capture path not tested.\n\nChange-Id: Ic6da0ef56cfa073b6383fcc389c5ad01a39a7c48\nSigned-off-by: Chris Kelly \u003cc-kelly@ti.com\u003e\n"
    },
    {
      "commit": "df3acbd4cfe191376bb0986d1aa0d7d0d9e30bdd",
      "tree": "108fef8a3df47251e51864b2564b1cd845a60104",
      "parents": [
        "067d752fd7f7dfaa73dadf3bb9e2f76cf8ff1b1e",
        "38e0c76dd73084c3bdf941122365fe3955fa4525"
      ],
      "author": {
        "name": "Jean-Baptiste Queru",
        "email": "jbq@google.com",
        "time": "Mon Aug 01 17:27:45 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Mon Aug 01 17:27:45 2011 -0700"
      },
      "message": "Merge \"Reference invensense headers in their new location\""
    },
    {
      "commit": "067d752fd7f7dfaa73dadf3bb9e2f76cf8ff1b1e",
      "tree": "61b134233b81ca99c3a0102080a81c36437cd33b",
      "parents": [
        "c92c22d2442a0459c413394e088a669c324bdd8c"
      ],
      "author": {
        "name": "Chris Kelly",
        "email": "c-kelly@ti.com",
        "time": "Fri Jul 29 22:37:00 2011 -0500"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 01 15:53:43 2011 -0700"
      },
      "message": "audio: correct output set parameters\n\nChange-Id: I90c957ce7436b52d2aa4339b21d91921e9e612ad\nSigned-off-by: Chris Kelly \u003cc-kelly@ti.com\u003e\n"
    },
    {
      "commit": "c92c22d2442a0459c413394e088a669c324bdd8c",
      "tree": "8554399e878faade9316e137019aec3b8c729618",
      "parents": [
        "3f62ba0c063d1aae554e7c81ffe85fc735e86fbb"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 01 12:14:04 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Aug 01 12:14:07 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n25a644b ARM: omap4: tuna: HSPA sample 4 reports itself as rev3 not rev4.\n\nChange-Id: I681375587d44bca0338196fce8aed8d9b743edd2\n"
    },
    {
      "commit": "38e0c76dd73084c3bdf941122365fe3955fa4525",
      "tree": "0c84dc8477922478555a868f755886f87adbba72",
      "parents": [
        "3f62ba0c063d1aae554e7c81ffe85fc735e86fbb"
      ],
      "author": {
        "name": "Jean-Baptiste Queru",
        "email": "jbq@google.com",
        "time": "Mon Aug 01 10:21:37 2011 -0700"
      },
      "committer": {
        "name": "Jean-Baptiste Queru",
        "email": "jbq@google.com",
        "time": "Mon Aug 01 10:21:37 2011 -0700"
      },
      "message": "Reference invensense headers in their new location\n\nChange-Id: Ic3f255d147f3b9fd59d7a3be1d807d1a7b67fed3\n"
    },
    {
      "commit": "3f62ba0c063d1aae554e7c81ffe85fc735e86fbb",
      "tree": "d60d36f12a1167b30f28fcfc57c12b44f1c1a22a",
      "parents": [
        "741925e1e232800d5c8ccfed6cc6af9b35ae264f",
        "cd9d08ade8c2f4219c06af516bc88628725d1f2e"
      ],
      "author": {
        "name": "Jean-Baptiste Queru",
        "email": "jbq@google.com",
        "time": "Sat Jul 30 17:41:30 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Sat Jul 30 17:41:30 2011 -0700"
      },
      "message": "Merge \"Remove VideoEditor from the hardware library makefile.\""
    },
    {
      "commit": "cd9d08ade8c2f4219c06af516bc88628725d1f2e",
      "tree": "4080b58bf3adde106b6e700212757b12483952fd",
      "parents": [
        "34115e5cd02aa543bbb40dbb546aedfae7b0fca7"
      ],
      "author": {
        "name": "Jean-Baptiste Queru",
        "email": "jbq@google.com",
        "time": "Sat Jul 30 15:59:35 2011 -0700"
      },
      "committer": {
        "name": "Jean-Baptiste Queru",
        "email": "jbq@google.com",
        "time": "Sat Jul 30 15:59:35 2011 -0700"
      },
      "message": "Remove VideoEditor from the hardware library makefile.\n\nThis is an application, not a hardware library, so it\nshouldn\u0027t be included in all builds for that hardware\ntarget.\n\nChange-Id: I437d41d9bda05274718a4983b38e78fd74c74c53\n"
    },
    {
      "commit": "741925e1e232800d5c8ccfed6cc6af9b35ae264f",
      "tree": "867b4eb8a971c0496714f80fe6fba0862450356f",
      "parents": [
        "34115e5cd02aa543bbb40dbb546aedfae7b0fca7"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Fri Jul 29 16:51:45 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Fri Jul 29 16:51:45 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n0a8b6f5 OMAP4: Tuna: Regulator: enable full constraints\nbd46654 OMAP4: Tuna: Regulator: Keep VANA always ON.\n867ef5a OMAP4: Tuna: Regulator: Register VDD3 and VMEM\na5b975c Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n18c1fc3 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nbb33d76 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\n5fd537a net: wireless: bcmdhd: Fix memory corruption in wl_android_get_rssi()\n3eb50e2 net: wireless: bcmdhd: change logic for removing monitor interace for P2P.\n62c2042 omap: fix compiler warning in iommu code\n2bf0fe6 omap: musb: fix a bad merge\n09476dd rpmsg: res_mgr: add i2c as resource\n36d731d OMAP:TILER: Add alloc_debug parameter.\n9785761 OMAP:TILER: Add debugfs entries for map print.\n77f7839 OMAP:DSS: Schedule callback completion irq only when needed\ncc164a8 OMAP:DSS: Allow specifying which DSS callbacks to get\n3cf0dbd OMAP:DSS: Fix callback concurency for DSI manual update panels\ne193375 OMAP:DSSCOMP: simplify queuing\n3effb6e OMAP:DSSCOMP: Expanded auto-update panel fixes to manual panels\n2af6508 omap: serial: fix section mismatch warnings\n2bcce7c Merge branch \u0027linux-omap-audio-3.0\u0027 into linux-omap-3.0\n42fe5ff ASoC: sdp4430: Ignore suspend for legacy DAI links\nbbdfc12 ASoC: ABE DSP: Add platform driver suspend/resume\nfb64bd3 ASoC: ABE: Add DAI driver suspend/resume\n4031802 ASoC: DSP: Add suspend/resume for FEs\nbc6bcb1 MFD: TWL: 6030: Regulator: Add support for VDD3 and VMEM\n7f3cd0f MFD: TWL: 6035: Replace hard coded value with macro\n30cbe79 MFD: TWL: 6030: Regulator: Allow SMPS to register with regulator framework\nc51e07c OMAP: timer: use put_sync_suspend instead of put_sync\ncf33fbe ASoC: OMAP ABE DSP: use put_sync_suspend instead of put_sync\na7da251 GPIO: OMAP: use put_sync_suspend instead of put_sync in irq handler.\n22e181e OMAP: hwmod: add omap_hwmod_name_get_dev\nb074bad OMAP4: PM: Overwrite the default idle hook with custom omap_idle()\n5c4ff06 OMAP4: hwmod_data: GPU: Fix missing module idle setting.\nf32f986 Revert \"OMAP4: PM: enable wakeup irq for PRCM and SYS_1N\"\n6264195 OMAP: PM: add debugfs entry to dump tput users\n3aebc55 OMAP4: HSMMC: enable context save/restore\ne9dd4ac OMAP4: PM: use next_state for setting the wakeup lat target\n6360c71 OMAP2+: Ensure that PM inits are done before allowing DVFS\n056c91d tuna_defconfig: set mem\u003d1G\ne50bc2a OMAP4: USBHS: Enable remote wakeup using I/O pads\n\nChange-Id: Ib0282b00af8577e48d4c28fcccb87d89ccf0696e\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "34115e5cd02aa543bbb40dbb546aedfae7b0fca7",
      "tree": "e8717622ee1fc458644c657770d14f4a565917da",
      "parents": [
        "b9e6dc165254432161cc000009126186a26663af",
        "046e31e67ed01632e94b095982d3b133b68bb05f"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Fri Jul 29 15:09:41 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Fri Jul 29 15:09:41 2011 -0700"
      },
      "message": "Merge \"audio: use per-device maximum RIL volume\""
    },
    {
      "commit": "046e31e67ed01632e94b095982d3b133b68bb05f",
      "tree": "e6ace925387273599ef013954beb174d0e6b3970",
      "parents": [
        "c7c238aaa2e92673e4739ff321fd8304b7912f16"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Tue Jul 26 20:12:51 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Fri Jul 29 14:55:57 2011 -0700"
      },
      "message": "audio: use per-device maximum RIL volume\n\nThe maguro and toro devices have different radios, each\nsupporting a different maximum volume. Determine the maximum\nvolume for the device from the ro.config.vc_call_vol_steps\nproperty and use that to calculate the volume to send to\nthe RIL.\n\nChange-Id: I02921ed41ddbae90f8d3a149c05d37d3e87deab0\n"
    },
    {
      "commit": "b9e6dc165254432161cc000009126186a26663af",
      "tree": "cc7d9a4719a8a18c66672101402109815ebb9427",
      "parents": [
        "c7c238aaa2e92673e4739ff321fd8304b7912f16"
      ],
      "author": {
        "name": "Mike Lockwood",
        "email": "lockwood@android.com",
        "time": "Fri Jul 29 12:53:32 2011 -0400"
      },
      "committer": {
        "name": "Mike Lockwood",
        "email": "lockwood@android.com",
        "time": "Fri Jul 29 12:53:32 2011 -0400"
      },
      "message": "init.tuna.usb.rc: Move some common USB configuration logic to init.rc\n\nChange-Id: Ib7bc1f43a8be2d7e91d6a4da618b6bcd54e91a28\nSigned-off-by: Mike Lockwood \u003clockwood@android.com\u003e\n"
    },
    {
      "commit": "c7c238aaa2e92673e4739ff321fd8304b7912f16",
      "tree": "54054ba73dfd72a21756ecf9289dfa0bf6a2cdec",
      "parents": [
        "0bc438f9d1a435745db7f3a2bdcabb4c2303aa1a"
      ],
      "author": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Thu Jul 28 23:34:01 2011 -0700"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Thu Jul 28 23:34:17 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n18b0e8d MODEM_IF:omap4:toro:Implement via download by GOTA\n\nChange-Id: I469a1d577a39a86196218c349bca057f96dc850b\n"
    },
    {
      "commit": "0bc438f9d1a435745db7f3a2bdcabb4c2303aa1a",
      "tree": "1ab31551c4891fe915eab6d10c8072fba2d1ad5d",
      "parents": [
        "9cc9d048c12f8067357ec6db9691536e46c8cf53"
      ],
      "author": {
        "name": "sinikang",
        "email": "sinikang@samsung.com",
        "time": "Thu Jul 28 14:37:56 2011 -0700"
      },
      "committer": {
        "name": "Benoit Goby",
        "email": "benoit@android.com",
        "time": "Thu Jul 28 22:47:20 2011 -0700"
      },
      "message": "Toro : add DM related device files permission\n\n\t- /dev/cdma_rmnet5 ( logging channel for CDMA modem)\n\t- /dev/lte_rmnet4 ( logging channel for LTE modem)\n\t- /dev/ttyGS1 ( usb interface device for Host PC)\n\nChange-Id: Ic68b01f60e6bf1ad8ccec45f566d478136d1caf2\nSigned-off-by: sinikang \u003csinikang@samsung.com\u003e\n"
    },
    {
      "commit": "9cc9d048c12f8067357ec6db9691536e46c8cf53",
      "tree": "8e679ac1207f415408a9516cbb33c4c729cc66c9",
      "parents": [
        "1319478b07977ba085d45846f7ef20b23ece5f27"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Jul 28 17:33:18 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Jul 28 17:33:18 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n6c6b034 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nd3cc8c9 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n502842e omap: remoteproc: support reading memory maps from firmware\n0a3b378 remoteproc: support reading memory maps from firmware\nf14945b omap: remoteproc: allow loading of new resource_table with memmap\n\nChange-Id: Ib99a24b876c8f3d64c936c96d730a4ae8c33e89a\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "1319478b07977ba085d45846f7ef20b23ece5f27",
      "tree": "c194cf36d5cefdd254f4727516cd07bfd0ac623d",
      "parents": [
        "7bd660ac7bd145aeea36ff1bc200dec32fd93ac2"
      ],
      "author": {
        "name": "Kalpesh Patil",
        "email": "kalpeshpatil@ti.com",
        "time": "Fri Jul 29 05:09:56 2011 +0530"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Jul 28 17:08:11 2011 -0700"
      },
      "message": "Update media_profiles to use new set of bitrates for video\n\nThis patch updates video bitrates for all resolutions in media profiles.\nThis patch also removes 720p resolution from primary camera,\nsince it is desired to use 480p resolution as second highest one after 1080p.\n\nChange-Id: I6f8ca13b95e270ce8577c7061d49e8acebf09424\nSigned-Off-By: Kalpesh Patil \u003ckalpeshpatil@ti.com\u003e\n"
    },
    {
      "commit": "7bd660ac7bd145aeea36ff1bc200dec32fd93ac2",
      "tree": "e5b15931c2556cd00ec3ccea5bc36454d662311d",
      "parents": [
        "47d229328a1265b55deb3c7626be9a33d7717f5d"
      ],
      "author": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Jul 28 14:39:45 2011 -0700"
      },
      "committer": {
        "name": "Iliyan Malchev",
        "email": "malchev@google.com",
        "time": "Thu Jul 28 14:39:45 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\nddf8f3a ARM: omap4: tuna: reserve memory for ducati\n5f1b5b9 omap4: tuna: reduce tiler heap to 128M\ncf6dfeb Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n9efb93d Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n48fa674 OMAP4: SDP/Panda: reserve memory for ducati \u0026 SMC\n3a9ef51 omap: add ipu carveout for remoteproc functionality\n4a96c58 omap: remove remoteproc carveout memory dependency on bridge\n3cd873c OMAP:DSSCOMP: Fix earlysuspend timeout\n5c30768 Merge branch \u0027linux-omap-dss-3.0\u0027 into linux-omap-3.0\nf9ace53 OMAP:DSS: Fix buffer underflow errors\n74ee24a OMAP4:DSS: Add missing max y-decimation limit to predecimation.\ne3c245d usb: core: Workaround for usb auto-suspend issue\nac61935 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nd74c548 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nfcc6cd1 Merge branch \u0027linux-omap-dss-3.0\u0027 into linux-omap-3.0\n711f587 ARM: omap: tuna: Remove CONFIG_CFG80211_WEXT\n5bbc925 Revert \"OMAP4: DSS: Fix CIO errors with interleaved commands\"\n\nChange-Id: I98ef4f2b12f16a00b1dfc425fc726a62e80cbb07\nSigned-off-by: Iliyan Malchev \u003cmalchev@google.com\u003e\n"
    },
    {
      "commit": "47d229328a1265b55deb3c7626be9a33d7717f5d",
      "tree": "6fb3fc9938cbbee34aa5fdd6653595de70fec070",
      "parents": [
        "08cf89b3cf8c9d19fd6ad2c43f04704738a58407"
      ],
      "author": {
        "name": "Mike Lockwood",
        "email": "lockwood@android.com",
        "time": "Thu Jul 28 13:12:34 2011 -0400"
      },
      "committer": {
        "name": "Mike Lockwood",
        "email": "lockwood@android.com",
        "time": "Thu Jul 28 13:16:38 2011 -0400"
      },
      "message": "init.tuna.usb.rc: Remove mass storage USB configuration\n\nNo longer needed without installer CD support.\n\nChange-Id: Ie6293c049559273c0d70a59719222f676b5ef82f\nSigned-off-by: Mike Lockwood \u003clockwood@android.com\u003e\n"
    },
    {
      "commit": "08cf89b3cf8c9d19fd6ad2c43f04704738a58407",
      "tree": "a47e22ea3bc68e95f1026879d3f6f1542d7c82cd",
      "parents": [
        "bdc0024a53c1cb422f16a5010c6010273ac04a99"
      ],
      "author": {
        "name": "Mike Lockwood",
        "email": "lockwood@android.com",
        "time": "Thu Jul 28 09:47:53 2011 -0400"
      },
      "committer": {
        "name": "Mike Lockwood",
        "email": "lockwood@android.com",
        "time": "Thu Jul 28 09:47:53 2011 -0400"
      },
      "message": "Remove AFT installer image from the build\n\nChange-Id: I245e0f9996304df8d19308ae8357bc61d2846900\nSigned-off-by: Mike Lockwood \u003clockwood@android.com\u003e\n"
    },
    {
      "commit": "bdc0024a53c1cb422f16a5010c6010273ac04a99",
      "tree": "4b89f6dbc357e9ac3d6a608824f0d6fae0192011",
      "parents": [
        "8e1f6bed98ac23ba5fe405d26e24361c9bc31501"
      ],
      "author": {
        "name": "Paul Eastham",
        "email": "eastham@google.com",
        "time": "Wed Jul 27 15:49:02 2011 -0700"
      },
      "committer": {
        "name": "Paul Eastham",
        "email": "eastham@google.com",
        "time": "Wed Jul 27 15:49:02 2011 -0700"
      },
      "message": "tuna: new kernel prebuilt\n\na2ea041 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n8c6be05 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n33a2170 usb: ehci-omap: fix clock enabling in shutdown path\n8e9aaf5 arm: omap: usb: global Suspend and resume support of ehci and oh\n1233c93 mfd: Add omap-usbhs runtime PM support\nc6adbae arm: omap: usb: device name change for the clk names of usbhs\n10bfb57 input: mms_ts: update driver to work with firmware version 0x21\n2aef5aa mms_ts: update firmware to version 0x21\n7e3c198 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n8d126fd Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n0f97266 Merge branch \u0027android-3.0\u0027 into android-omap-3.0\n4b05b77 Additional patch for scan and connection problem.\na4f1502 net: wireless: bcmdhd: Put p2p_dev_addr under DHD_P2P_DEV_ADDR_F\ncfb2d73 net: wireless: bcmdhd: Fix rfkill cleaning on failure\n0635505 Fix scan and connection problem.\nc2851b5 Update to 5.90.125.52: Fix unremoved monitor interface problem a\nfe4d980 Fix a potential crash/memory leak if NVRAM fails to load.\n237981d net: wireless: bcmdhd: Ignore WL_BSS_INFO_VERSION value\n48bf6f1 Fix ag band issue and escan crashes\n23b84f9 OMAP4: HSI: Tesla: set to RET after wakeup\n0d5c2a7 rtc: twl: Fix registration vs. init order\n40e3f7c rtc: twl: Use threaded IRQ, remove IRQ enable in interrupt handl\nb514722 ARM: omap4: tuna: Add non-default pads for uart1 and uart3\n33ce9c0 Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n6bd49b4 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n6ac2566 ARM: omap2+: Allow boards to override default uart pads\n94aafce OMAP2+: HSI: initialize the device at boot\n17d8e85 OMAP4: Tuna: Single step ramp for twl6040 HS/HF outputs\nde28c2b arm: omap: usb: register hwmods of usbhs\n775d213 arm: omap: usb: ehci and ohci hwmod structures for omap3\n056f973 arm: omap: usb: ehci and ohci hwmod structures for omap4\n\nChange-Id: I7cb3fdc7a235f5dffd6b9fa0d145907c68650b2d\n"
    },
    {
      "commit": "8e1f6bed98ac23ba5fe405d26e24361c9bc31501",
      "tree": "84119c0094c996c67335f90601aec77595e3a1aa",
      "parents": [
        "209c26c16134bf7caa570d4013603e275155a77b",
        "d7922d9dae73d76bb874367a5383aabb14af8480"
      ],
      "author": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Wed Jul 27 11:56:13 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Wed Jul 27 11:56:13 2011 -0700"
      },
      "message": "Merge \"Disable BT hot feature till low power mode is working.\""
    },
    {
      "commit": "d7922d9dae73d76bb874367a5383aabb14af8480",
      "tree": "b5822e98e4bbf7c2243e9e296a247483d9a89753",
      "parents": [
        "ed376dd81a93808c5655723201dfc315b0861dbc"
      ],
      "author": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Tue Jul 26 23:34:57 2011 -0700"
      },
      "committer": {
        "name": "Jaikumar Ganesh",
        "email": "jaikumar@google.com",
        "time": "Tue Jul 26 23:36:39 2011 -0700"
      },
      "message": "Disable BT hot feature till low power mode is working.\n\nCurrently low power BT is not enabled yet, so we will\nenable this feature after Power management is in.\n\nChange-Id: Ica060368db9078ab546ec591390024f81cebea62\n"
    },
    {
      "commit": "209c26c16134bf7caa570d4013603e275155a77b",
      "tree": "5c605e21cd1b2308b1ddaffde680477f68429d53",
      "parents": [
        "ed376dd81a93808c5655723201dfc315b0861dbc"
      ],
      "author": {
        "name": "Erik Gilling",
        "email": "konkers@android.com",
        "time": "Tue Jul 26 16:32:51 2011 -0700"
      },
      "committer": {
        "name": "Erik Gilling",
        "email": "konkers@android.com",
        "time": "Tue Jul 26 16:33:05 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\n1d882dc Merge branch \u0027android-omap\u0027 into android-omap-tuna\nb198a6c Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\ncde0eda Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\nae02fb3 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n46ecc0b OMAP4: DSSCOMP: update completion callback\n800a05d Revert \"OMAP:OMAPLFB: Added reference counting for NV12 buffers on display\"\n79c61a3 gpu: pvr: Update to DDK 1.8.18.949\n2288ccc MFD: twl6030-madc: set CH2 scaler enable\nf3899bc ARM: omap4: tuna: 4th Sample USB Mux Support\n6665c7b Merge branch \u0027linux-omap-dss\u0027 into linux-omap\n0af462f OMAP4: DSS: Fix CIO errors with interleaved commands\n1503d58 rtc: twl: Enable RTC IRQ for wakeup\n7d24fdd OMAP4: Print wakeup GPIO IRQs\ncc321de OMAP4: tuna: Drive MSECURE high\n27b867f ARM: omap4: tuna: Modify orientation matrix for sensors\n2459b97 ARM: omap4: tuna: Add vibrator driver\n\nChange-Id: I0b47797dad84a568b03452f557fc0b49455e86fe\nSigned-off-by: Erik Gilling \u003ckonkers@android.com\u003e\n"
    },
    {
      "commit": "ed376dd81a93808c5655723201dfc315b0861dbc",
      "tree": "357a1eb9ad4f7e7a35d51211a90cf123bddc1a68",
      "parents": [
        "a8377945c249394e51d2ce699c428fcf66bcbb0d",
        "9d1e25142e4b1ae65240a1304aea9b5a63baf65f"
      ],
      "author": {
        "name": "Chih-Chung Chang",
        "email": "chihchung@google.com",
        "time": "Mon Jul 25 18:36:42 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Mon Jul 25 18:36:42 2011 -0700"
      },
      "message": "Merge \"Increase video editor capability to 1080.\""
    },
    {
      "commit": "a8377945c249394e51d2ce699c428fcf66bcbb0d",
      "tree": "5222d9fe03c0967bd17252f343241f4dc0d0e78d",
      "parents": [
        "014ecfe82c8a1ab7176bbb13c9b8a710c66b0f60",
        "d974bd3937a1115473c89b1f084a12a4ecf3f988"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Jul 25 17:23:38 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Mon Jul 25 17:23:38 2011 -0700"
      },
      "message": "Merge \"audio: add missing locks\""
    },
    {
      "commit": "d974bd3937a1115473c89b1f084a12a4ecf3f988",
      "tree": "902ec205aab288840f1fd6fbec2d9b7e4ec48896",
      "parents": [
        "759e6a2aafca4618224698efb2ddd4d43e3eba3e"
      ],
      "author": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Jul 25 16:56:43 2011 -0700"
      },
      "committer": {
        "name": "Simon Wilson",
        "email": "simonwilson@google.com",
        "time": "Mon Jul 25 16:56:43 2011 -0700"
      },
      "message": "audio: add missing locks\n\nThe device lock must be held when using the mixer because\nmixer_* calls are not thread safe. This fixes a bug where some\nmixer controls including the earpiece volume were not being\nset at boot.\n\nBug: 5073076\nChange-Id: Ide060ccad49e7276b7555428d2ff3ab399a5ce40\n"
    },
    {
      "commit": "014ecfe82c8a1ab7176bbb13c9b8a710c66b0f60",
      "tree": "33f9dd62bb6a33981ae7a944c8a6c091e659e34a",
      "parents": [
        "05af98f888922edaf809e3a3da027efb9f1105ec",
        "46386db6e8c9e173dc2704bed1307b6e4279a4d8"
      ],
      "author": {
        "name": "Erik Gilling",
        "email": "konkers@android.com",
        "time": "Mon Jul 25 16:20:56 2011 -0700"
      },
      "committer": {
        "name": "Android (Google) Code Review",
        "email": "android-gerrit@google.com",
        "time": "Mon Jul 25 16:20:56 2011 -0700"
      },
      "message": "Merge \"tuna: update prebuilt kernel\""
    },
    {
      "commit": "46386db6e8c9e173dc2704bed1307b6e4279a4d8",
      "tree": "7d7640b51efadb88716a0809b90b46c0ef05dc66",
      "parents": [
        "759e6a2aafca4618224698efb2ddd4d43e3eba3e"
      ],
      "author": {
        "name": "Erik Gilling",
        "email": "konkers@android.com",
        "time": "Mon Jul 25 15:52:23 2011 -0700"
      },
      "committer": {
        "name": "Erik Gilling",
        "email": "konkers@android.com",
        "time": "Mon Jul 25 15:52:23 2011 -0700"
      },
      "message": "tuna: update prebuilt kernel\n\nc95a1bc Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\ne0e7952 Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\n12cd17b gpu: pvr: Update to DDK 1.8.18.945\nd40fb87 gpu: pvr: Update to DDK 1.8.18.943\n420d34f gpu: pvr: Update to DDK 1.8.18.927\nc009999 gpu: pvr: Update to DDK 1.8.18.919\n70df6d2 gpu: pvr: Update to DDK 1.8.18.891\nb6f4d45 gpu: pvr: Update to DDK 1.8.18.877\n164db4e gpu: pvr: Update to DDK 1.8.18.866\nce3b1db Merge branch \u0027android-omap-3.0\u0027 into android-omap-tuna-3.0\n5b2ec2e Merge branch \u0027linux-omap-3.0\u0027 into android-omap-3.0\nc06c360 Merge branch \u0027linux-omap-pm-3.0\u0027 into linux-omap-3.0\ncc7e5167 Merge branch \u0027omap-pm-integration\u0027 of git://github.com/nmenon/linux-omap-ti-pm into linux-\n1828652 modem_if: usb_link: Interrupt handlers can\u0027t return errors\n8102b69 MODEM_IF:omap4:toro:Implement via download by GOTA\n3cd1994 OMAP4: PM: add option to save registers before suspend.\nee80580 OMAP4: PM: Inline SR PM only for idle, not suspend\nb6be18f OMAP3+: PM: SR: add suspend/resume handlers\n05608b1 OMAP4: PM: allow sleep to know if called inline of suspend\n57c522b mfd: twl6030: Setup irq_wake infrastructure.\nb62a1a1 OMAP4: PM: Make PRCM irq wakeup capable.\n17f86fa OMAP4: PM: Keep dummy IRQ set_wake() handler.\n4520aa3 OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup\n0d236ab OMAP: powerdomains: Make all powerdomain target states as ON at init\n230da32 OMAP4: hwmod_data: Fix the gpu idlemode setting.\n09e1ca4 OMAP2+: CPUfreq: update lpj with reference value to avoid progressive error.\n0628a18 arch/arm/mach-omap2/smartreflex.c: add missing error-handling code\n\nChange-Id: I30332ddf07515f802aae5b843431e5e83eb21609\nSigned-off-by: Erik Gilling \u003ckonkers@android.com\u003e\n"
    },
    {
      "commit": "05af98f888922edaf809e3a3da027efb9f1105ec",
      "tree": "7befe6f446fb4e44d312fd44b780d9d3b27373ed",
      "parents": [
        "759e6a2aafca4618224698efb2ddd4d43e3eba3e"
      ],
      "author": {
        "name": "Dmitry Shmidt",
        "email": "dimitrysh@google.com",
        "time": "Mon Jul 25 15:13:12 2011 -0700"
      },
      "committer": {
        "name": "Dmitry Shmidt",
        "email": "dimitrysh@google.com",
        "time": "Mon Jul 25 15:13:12 2011 -0700"
      },
      "message": "wifi: Add firmware path parameter for tethering and p2p\n\nChange-Id: Idfa528187265e889b24cbee46b17d9c35309943f\nSigned-off-by: Dmitry Shmidt \u003cdimitrysh@google.com\u003e\n"
    }
  ],
  "next": "9d1e25142e4b1ae65240a1304aea9b5a63baf65f"
}
