# English translations for GNU bash package.
# Copyright (C) 2009 Free Software Foundation, Inc.
# This file is distributed under the same license as the GNU bash package.
# Automatically generated, 2009.
#
# All this catalog "translates" are quotation characters.
# The msgids must be ASCII and therefore cannot contain real quotation
# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
# and double quote (0x22). These substitutes look strange; see
# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
#
# This catalog translates grave accent (0x60) and apostrophe (0x27) to
# left single quotation mark (U+2018) and right single quotation mark (U+2019).
# It also translates pairs of apostrophe (0x27) to
# left single quotation mark (U+2018) and right single quotation mark (U+2019)
# and pairs of quotation mark (0x22) to
# left double quotation mark (U+201C) and right double quotation mark (U+201D).
#
# When output to an UTF-8 terminal, the quotation characters appear perfectly.
# When output to an ISO-8859-1 terminal, the single quotation marks are
# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
# grave/acute accent (by libiconv), and the double quotation marks are
# transliterated to 0x22.
# When output to an ASCII terminal, the single quotation marks are
# transliterated to apostrophes, and the double quotation marks are
# transliterated to 0x22.
#
msgid ""
msgstr ""
"Project-Id-Version: GNU bash 4.1-release\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-12-30 08:25-0500\n"
"PO-Revision-Date: 2009-12-30 08:25-0500\n"
"Last-Translator: Automatically generated\n"
"Language-Team: none\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: arrayfunc.c:50
msgid "bad array subscript"
msgstr "bad array subscript"

#: arrayfunc.c:313 builtins/declare.def:481
#, c-format
msgid "%s: cannot convert indexed to associative array"
msgstr "%s: cannot convert indexed to associative array"

#: arrayfunc.c:480
#, c-format
msgid "%s: invalid associative array key"
msgstr "%s: invalid associative array key"

#: arrayfunc.c:482
#, c-format
msgid "%s: cannot assign to non-numeric index"
msgstr "%s: cannot assign to non-numeric index"

#: arrayfunc.c:518
#, c-format
msgid "%s: %s: must use subscript when assigning associative array"
msgstr "%s: %s: must use subscript when assigning associative array"

#: bashhist.c:383
#, c-format
msgid "%s: cannot create: %s"
msgstr "%s: cannot create: %s"

#: bashline.c:3457
msgid "bash_execute_unix_command: cannot find keymap for command"
msgstr "bash_execute_unix_command: cannot find keymap for command"

#: bashline.c:3543
#, c-format
msgid "%s: first non-whitespace character is not `\"'"
msgstr "%s: first non-whitespace character is not ‘\"’"

#: bashline.c:3572
#, c-format
msgid "no closing `%c' in %s"
msgstr "no closing ‘%c’ in %s"

#: bashline.c:3606
#, c-format
msgid "%s: missing colon separator"
msgstr "%s: missing colon separator"

#: builtins/alias.def:132
#, c-format
msgid "`%s': invalid alias name"
msgstr "‘%s’: invalid alias name"

#: builtins/bind.def:120 builtins/bind.def:123
msgid "line editing not enabled"
msgstr "line editing not enabled"

#: builtins/bind.def:206
#, c-format
msgid "`%s': invalid keymap name"
msgstr "‘%s’: invalid keymap name"

#: builtins/bind.def:245
#, c-format
msgid "%s: cannot read: %s"
msgstr "%s: cannot read: %s"

#: builtins/bind.def:260
#, c-format
msgid "`%s': cannot unbind"
msgstr "‘%s’: cannot unbind"

#: builtins/bind.def:295 builtins/bind.def:325
#, c-format
msgid "`%s': unknown function name"
msgstr "‘%s’: unknown function name"

#: builtins/bind.def:303
#, c-format
msgid "%s is not bound to any keys.\n"
msgstr "%s is not bound to any keys.\n"

#: builtins/bind.def:307
#, c-format
msgid "%s can be invoked via "
msgstr "%s can be invoked via "

#: builtins/break.def:77 builtins/break.def:117
msgid "loop count"
msgstr "loop count"

#: builtins/break.def:137
msgid "only meaningful in a `for', `while', or `until' loop"
msgstr "only meaningful in a ‘for’, ‘while’, or ‘until’ loop"

#: builtins/caller.def:133
msgid ""
"Returns the context of the current subroutine call.\n"
"    \n"
"    Without EXPR, returns "
msgstr ""
"Returns the context of the current subroutine call.\n"
"    \n"
"    Without EXPR, returns "

#: builtins/caller.def:135
msgid ""
".  With EXPR, returns\n"
"    "
msgstr ""
".  With EXPR, returns\n"
"    "

#: builtins/caller.def:136
msgid ""
"; this extra information can be used to\n"
"    provide a stack trace.\n"
"    \n"
"    The value of EXPR indicates how many call frames to go back before the\n"
"    current one; the top frame is frame 0."
msgstr ""
"; this extra information can be used to\n"
"    provide a stack trace.\n"
"    \n"
"    The value of EXPR indicates how many call frames to go back before the\n"
"    current one; the top frame is frame 0."

#: builtins/cd.def:215
msgid "HOME not set"
msgstr "HOME not set"

#: builtins/cd.def:227
msgid "OLDPWD not set"
msgstr "OLDPWD not set"

#: builtins/common.c:101
#, c-format
msgid "line %d: "
msgstr "line %d: "

#: builtins/common.c:139 error.c:261
#, c-format
msgid "warning: "
msgstr "warning: "

#: builtins/common.c:153
#, c-format
msgid "%s: usage: "
msgstr "%s: usage: "

#: builtins/common.c:166 test.c:827
msgid "too many arguments"
msgstr "too many arguments"

#: builtins/common.c:191 shell.c:499 shell.c:782
#, c-format
msgid "%s: option requires an argument"
msgstr "%s: option requires an argument"

#: builtins/common.c:198
#, c-format
msgid "%s: numeric argument required"
msgstr "%s: numeric argument required"

#: builtins/common.c:205
#, c-format
msgid "%s: not found"
msgstr "%s: not found"

#: builtins/common.c:214 shell.c:795
#, c-format
msgid "%s: invalid option"
msgstr "%s: invalid option"

#: builtins/common.c:221
#, c-format
msgid "%s: invalid option name"
msgstr "%s: invalid option name"

#: builtins/common.c:228 general.c:231 general.c:236
#, c-format
msgid "`%s': not a valid identifier"
msgstr "‘%s’: not a valid identifier"

#: builtins/common.c:238
msgid "invalid octal number"
msgstr "invalid octal number"

#: builtins/common.c:240
msgid "invalid hex number"
msgstr "invalid hex number"

#: builtins/common.c:242 expr.c:1256
msgid "invalid number"
msgstr "invalid number"

#: builtins/common.c:250
#, c-format
msgid "%s: invalid signal specification"
msgstr "%s: invalid signal specification"

#: builtins/common.c:257
#, c-format
msgid "`%s': not a pid or valid job spec"
msgstr "‘%s’: not a pid or valid job spec"

#: builtins/common.c:264 error.c:454
#, c-format
msgid "%s: readonly variable"
msgstr "%s: readonly variable"

#: builtins/common.c:272
#, c-format
msgid "%s: %s out of range"
msgstr "%s: %s out of range"

#: builtins/common.c:272 builtins/common.c:274
msgid "argument"
msgstr "argument"

#: builtins/common.c:274
#, c-format
msgid "%s out of range"
msgstr "%s out of range"

#: builtins/common.c:282
#, c-format
msgid "%s: no such job"
msgstr "%s: no such job"

#: builtins/common.c:290
#, c-format
msgid "%s: no job control"
msgstr "%s: no job control"

#: builtins/common.c:292
msgid "no job control"
msgstr "no job control"

#: builtins/common.c:302
#, c-format
msgid "%s: restricted"
msgstr "%s: restricted"

#: builtins/common.c:304
msgid "restricted"
msgstr "restricted"

#: builtins/common.c:312
#, c-format
msgid "%s: not a shell builtin"
msgstr "%s: not a shell builtin"

#: builtins/common.c:321
#, c-format
msgid "write error: %s"
msgstr "write error: %s"

#: builtins/common.c:329
#, c-format
msgid "error setting terminal attributes: %s"
msgstr "error setting terminal attributes: %s"

#: builtins/common.c:331
#, c-format
msgid "error getting terminal attributes: %s"
msgstr "error getting terminal attributes: %s"

#: builtins/common.c:563
#, c-format
msgid "%s: error retrieving current directory: %s: %s\n"
msgstr "%s: error retrieving current directory: %s: %s\n"

#: builtins/common.c:629 builtins/common.c:631
#, c-format
msgid "%s: ambiguous job spec"
msgstr "%s: ambiguous job spec"

#: builtins/complete.def:276
#, c-format
msgid "%s: invalid action name"
msgstr "%s: invalid action name"

#: builtins/complete.def:449 builtins/complete.def:644
#: builtins/complete.def:853
#, c-format
msgid "%s: no completion specification"
msgstr "%s: no completion specification"

#: builtins/complete.def:696
msgid "warning: -F option may not work as you expect"
msgstr "warning: -F option may not work as you expect"

#: builtins/complete.def:698
msgid "warning: -C option may not work as you expect"
msgstr "warning: -C option may not work as you expect"

#: builtins/complete.def:826
msgid "not currently executing completion function"
msgstr "not currently executing completion function"

#: builtins/declare.def:122
msgid "can only be used in a function"
msgstr "can only be used in a function"

#: builtins/declare.def:360
msgid "cannot use `-f' to make functions"
msgstr "cannot use ‘-f’ to make functions"

#: builtins/declare.def:372 execute_cmd.c:4937
#, c-format
msgid "%s: readonly function"
msgstr "%s: readonly function"

#: builtins/declare.def:468
#, c-format
msgid "%s: cannot destroy array variables in this way"
msgstr "%s: cannot destroy array variables in this way"

#: builtins/declare.def:475
#, c-format
msgid "%s: cannot convert associative to indexed array"
msgstr "%s: cannot convert associative to indexed array"

#: builtins/enable.def:137 builtins/enable.def:145
msgid "dynamic loading not available"
msgstr "dynamic loading not available"

#: builtins/enable.def:312
#, c-format
msgid "cannot open shared object %s: %s"
msgstr "cannot open shared object %s: %s"

#: builtins/enable.def:335
#, c-format
msgid "cannot find %s in shared object %s: %s"
msgstr "cannot find %s in shared object %s: %s"

#: builtins/enable.def:459
#, c-format
msgid "%s: not dynamically loaded"
msgstr "%s: not dynamically loaded"

#: builtins/enable.def:474
#, c-format
msgid "%s: cannot delete: %s"
msgstr "%s: cannot delete: %s"

#: builtins/evalfile.c:134 builtins/hash.def:169 execute_cmd.c:4794
#: shell.c:1452
#, c-format
msgid "%s: is a directory"
msgstr "%s: is a directory"

#: builtins/evalfile.c:139
#, c-format
msgid "%s: not a regular file"
msgstr "%s: not a regular file"

#: builtins/evalfile.c:147
#, c-format
msgid "%s: file is too large"
msgstr "%s: file is too large"

#: builtins/evalfile.c:185 builtins/evalfile.c:203 execute_cmd.c:4864
#: shell.c:1462
#, c-format
msgid "%s: cannot execute binary file"
msgstr "%s: cannot execute binary file"

#: builtins/exec.def:212
#, c-format
msgid "%s: cannot execute: %s"
msgstr "%s: cannot execute: %s"

#: builtins/exit.def:65
#, c-format
msgid "logout\n"
msgstr "logout\n"

#: builtins/exit.def:88
msgid "not login shell: use `exit'"
msgstr "not login shell: use ‘exit’"

#: builtins/exit.def:120
#, c-format
msgid "There are stopped jobs.\n"
msgstr "There are stopped jobs.\n"

#: builtins/exit.def:122
#, c-format
msgid "There are running jobs.\n"
msgstr "There are running jobs.\n"

#: builtins/fc.def:262
msgid "no command found"
msgstr "no command found"

#: builtins/fc.def:349
msgid "history specification"
msgstr "history specification"

#: builtins/fc.def:370
#, c-format
msgid "%s: cannot open temp file: %s"
msgstr "%s: cannot open temp file: %s"

#: builtins/fg_bg.def:149 builtins/jobs.def:282
msgid "current"
msgstr "current"

#: builtins/fg_bg.def:158
#, c-format
msgid "job %d started without job control"
msgstr "job %d started without job control"

#: builtins/getopt.c:110
#, c-format
msgid "%s: illegal option -- %c\n"
msgstr "%s: illegal option -- %c\n"

#: builtins/getopt.c:111
#, c-format
msgid "%s: option requires an argument -- %c\n"
msgstr "%s: option requires an argument -- %c\n"

#: builtins/hash.def:92
msgid "hashing disabled"
msgstr "hashing disabled"

#: builtins/hash.def:138
#, c-format
msgid "%s: hash table empty\n"
msgstr "%s: hash table empty\n"

#: builtins/hash.def:244
#, c-format
msgid "hits\tcommand\n"
msgstr "hits\tcommand\n"

#: builtins/help.def:130
#, c-format
msgid "Shell commands matching keyword `"
msgid_plural "Shell commands matching keywords `"
msgstr[0] "Shell commands matching keyword `"
msgstr[1] "Shell commands matching keywords `"

#: builtins/help.def:168
#, c-format
msgid ""
"no help topics match `%s'.  Try `help help' or `man -k %s' or `info %s'."
msgstr ""
"no help topics match ‘%s’.  Try ‘help help’ or ‘man -k %s’ or ‘info %s’."

#: builtins/help.def:185
#, c-format
msgid "%s: cannot open: %s"
msgstr "%s: cannot open: %s"

#: builtins/help.def:337
#, c-format
msgid ""
"These shell commands are defined internally.  Type `help' to see this list.\n"
"Type `help name' to find out more about the function `name'.\n"
"Use `info bash' to find out more about the shell in general.\n"
"Use `man -k' or `info' to find out more about commands not in this list.\n"
"\n"
"A star (*) next to a name means that the command is disabled.\n"
"\n"
msgstr ""
"These shell commands are defined internally.  Type ‘help’ to see this list.\n"
"Type ‘help name’ to find out more about the function ‘name’.\n"
"Use ‘info bash’ to find out more about the shell in general.\n"
"Use ‘man -k’ or ‘info’ to find out more about commands not in this list.\n"
"\n"
"A star (*) next to a name means that the command is disabled.\n"
"\n"

#: builtins/history.def:154
msgid "cannot use more than one of -anrw"
msgstr "cannot use more than one of -anrw"

#: builtins/history.def:186
msgid "history position"
msgstr "history position"

#: builtins/history.def:365
#, c-format
msgid "%s: history expansion failed"
msgstr "%s: history expansion failed"

#: builtins/inlib.def:71
#, c-format
msgid "%s: inlib failed"
msgstr "%s: inlib failed"

#: builtins/jobs.def:109
msgid "no other options allowed with `-x'"
msgstr "no other options allowed with ‘-x’"

#: builtins/kill.def:200
#, c-format
msgid "%s: arguments must be process or job IDs"
msgstr "%s: arguments must be process or job IDs"

#: builtins/kill.def:263
msgid "Unknown error"
msgstr "Unknown error"

#: builtins/let.def:95 builtins/let.def:120 expr.c:501 expr.c:516
msgid "expression expected"
msgstr "expression expected"

#: builtins/mapfile.def:165
#, c-format
msgid "%s: not an indexed array"
msgstr "%s: not an indexed array"

#: builtins/mapfile.def:249 builtins/read.def:279
#, c-format
msgid "%s: invalid file descriptor specification"
msgstr "%s: invalid file descriptor specification"

#: builtins/mapfile.def:257 builtins/read.def:286
#, c-format
msgid "%d: invalid file descriptor: %s"
msgstr "%d: invalid file descriptor: %s"

#: builtins/mapfile.def:266 builtins/mapfile.def:304
#, c-format
msgid "%s: invalid line count"
msgstr "%s: invalid line count"

#: builtins/mapfile.def:277
#, c-format
msgid "%s: invalid array origin"
msgstr "%s: invalid array origin"

#: builtins/mapfile.def:294
#, c-format
msgid "%s: invalid callback quantum"
msgstr "%s: invalid callback quantum"

#: builtins/mapfile.def:326
msgid "empty array variable name"
msgstr "empty array variable name"

#: builtins/mapfile.def:347
msgid "array variable support required"
msgstr "array variable support required"

#: builtins/printf.def:374
#, c-format
msgid "`%s': missing format character"
msgstr "‘%s’: missing format character"

#: builtins/printf.def:551
#, c-format
msgid "`%c': invalid format character"
msgstr "‘%c’: invalid format character"

#: builtins/printf.def:578
#, c-format
msgid "warning: %s: %s"
msgstr "warning: %s: %s"

#: builtins/printf.def:757
msgid "missing hex digit for \\x"
msgstr "missing hex digit for \\x"

#: builtins/pushd.def:195
msgid "no other directory"
msgstr "no other directory"

#: builtins/pushd.def:462
msgid "<no current directory>"
msgstr "<no current directory>"

#: builtins/pushd.def:506
msgid "directory stack empty"
msgstr "directory stack empty"

#: builtins/pushd.def:508
msgid "directory stack index"
msgstr "directory stack index"

#: builtins/pushd.def:683
msgid ""
"Display the list of currently remembered directories.  Directories\n"
"    find their way onto the list with the `pushd' command; you can get\n"
"    back up through the list with the `popd' command.\n"
"    \n"
"    Options:\n"
"      -c\tclear the directory stack by deleting all of the elements\n"
"      -l\tdo not print tilde-prefixed versions of directories relative\n"
"    \tto your home directory\n"
"      -p\tprint the directory stack with one entry per line\n"
"      -v\tprint the directory stack with one entry per line prefixed\n"
"    \twith its position in the stack\n"
"    \n"
"    Arguments:\n"
"      +N\tDisplays the Nth entry counting from the left of the list shown "
"by\n"
"    \tdirs when invoked without options, starting with zero.\n"
"    \n"
"      -N\tDisplays the Nth entry counting from the right of the list shown "
"by\n"
"\tdirs when invoked without options, starting with zero."
msgstr ""
"Display the list of currently remembered directories.  Directories\n"
"    find their way onto the list with the ‘pushd’ command; you can get\n"
"    back up through the list with the ‘popd’ command.\n"
"    \n"
"    Options:\n"
"      -c\tclear the directory stack by deleting all of the elements\n"
"      -l\tdo not print tilde-prefixed versions of directories relative\n"
"    \tto your home directory\n"
"      -p\tprint the directory stack with one entry per line\n"
"      -v\tprint the directory stack with one entry per line prefixed\n"
"    \twith its position in the stack\n"
"    \n"
"    Arguments:\n"
"      +N\tDisplays the Nth entry counting from the left of the list shown "
"by\n"
"    \tdirs when invoked without options, starting with zero.\n"
"    \n"
"      -N\tDisplays the Nth entry counting from the right of the list shown "
"by\n"
"\tdirs when invoked without options, starting with zero."

#: builtins/pushd.def:705
msgid ""
"Adds a directory to the top of the directory stack, or rotates\n"
"    the stack, making the new top of the stack the current working\n"
"    directory.  With no arguments, exchanges the top two directories.\n"
"    \n"
"    Options:\n"
"      -n\tSuppresses the normal change of directory when adding\n"
"    \tdirectories to the stack, so only the stack is manipulated.\n"
"    \n"
"    Arguments:\n"
"      +N\tRotates the stack so that the Nth directory (counting\n"
"    \tfrom the left of the list shown by `dirs', starting with\n"
"    \tzero) is at the top.\n"
"    \n"
"      -N\tRotates the stack so that the Nth directory (counting\n"
"    \tfrom the right of the list shown by `dirs', starting with\n"
"    \tzero) is at the top.\n"
"    \n"
"      dir\tAdds DIR to the directory stack at the top, making it the\n"
"    \tnew current working directory.\n"
"    \n"
"    The `dirs' builtin displays the directory stack."
msgstr ""
"Adds a directory to the top of the directory stack, or rotates\n"
"    the stack, making the new top of the stack the current working\n"
"    directory.  With no arguments, exchanges the top two directories.\n"
"    \n"
"    Options:\n"
"      -n\tSuppresses the normal change of directory when adding\n"
"    \tdirectories to the stack, so only the stack is manipulated.\n"
"    \n"
"    Arguments:\n"
"      +N\tRotates the stack so that the Nth directory (counting\n"
"    \tfrom the left of the list shown by ‘dirs’, starting with\n"
"    \tzero) is at the top.\n"
"    \n"
"      -N\tRotates the stack so that the Nth directory (counting\n"
"    \tfrom the right of the list shown by ‘dirs’, starting with\n"
"    \tzero) is at the top.\n"
"    \n"
"      dir\tAdds DIR to the directory stack at the top, making it the\n"
"    \tnew current working directory.\n"
"    \n"
"    The ‘dirs’ builtin displays the directory stack."

#: builtins/pushd.def:730
msgid ""
"Removes entries from the directory stack.  With no arguments, removes\n"
"    the top directory from the stack, and changes to the new top directory.\n"
"    \n"
"    Options:\n"
"      -n\tSuppresses the normal change of directory when removing\n"
"    \tdirectories from the stack, so only the stack is manipulated.\n"
"    \n"
"    Arguments:\n"
"      +N\tRemoves the Nth entry counting from the left of the list\n"
"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
"    \tremoves the first directory, `popd +1' the second.\n"
"    \n"
"      -N\tRemoves the Nth entry counting from the right of the list\n"
"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
"    \tremoves the last directory, `popd -1' the next to last.\n"
"    \n"
"    The `dirs' builtin displays the directory stack."
msgstr ""
"Removes entries from the directory stack.  With no arguments, removes\n"
"    the top directory from the stack, and changes to the new top directory.\n"
"    \n"
"    Options:\n"
"      -n\tSuppresses the normal change of directory when removing\n"
"    \tdirectories from the stack, so only the stack is manipulated.\n"
"    \n"
"    Arguments:\n"
"      +N\tRemoves the Nth entry counting from the left of the list\n"
"    \tshown by ‘dirs’, starting with zero.  For example: ‘popd +0’\n"
"    \tremoves the first directory, ‘popd +1’ the second.\n"
"    \n"
"      -N\tRemoves the Nth entry counting from the right of the list\n"
"    \tshown by ‘dirs’, starting with zero.  For example: ‘popd -0’\n"
"    \tremoves the last directory, ‘popd -1’ the next to last.\n"
"    \n"
"    The ‘dirs’ builtin displays the directory stack."

#: builtins/read.def:252
#, c-format
msgid "%s: invalid timeout specification"
msgstr "%s: invalid timeout specification"

#: builtins/read.def:588
#, c-format
msgid "read error: %d: %s"
msgstr "read error: %d: %s"

#: builtins/return.def:73
msgid "can only `return' from a function or sourced script"
msgstr "can only ‘return’ from a function or sourced script"

#: builtins/set.def:768
msgid "cannot simultaneously unset a function and a variable"
msgstr "cannot simultaneously unset a function and a variable"

#: builtins/set.def:805
#, c-format
msgid "%s: cannot unset"
msgstr "%s: cannot unset"

#: builtins/set.def:812
#, c-format
msgid "%s: cannot unset: readonly %s"
msgstr "%s: cannot unset: readonly %s"

#: builtins/set.def:823
#, c-format
msgid "%s: not an array variable"
msgstr "%s: not an array variable"

#: builtins/setattr.def:186
#, c-format
msgid "%s: not a function"
msgstr "%s: not a function"

#: builtins/shift.def:71 builtins/shift.def:77
msgid "shift count"
msgstr "shift count"

#: builtins/shopt.def:260
msgid "cannot set and unset shell options simultaneously"
msgstr "cannot set and unset shell options simultaneously"

#: builtins/shopt.def:325
#, c-format
msgid "%s: invalid shell option name"
msgstr "%s: invalid shell option name"

#: builtins/source.def:128
msgid "filename argument required"
msgstr "filename argument required"

#: builtins/source.def:153
#, c-format
msgid "%s: file not found"
msgstr "%s: file not found"

#: builtins/suspend.def:101
msgid "cannot suspend"
msgstr "cannot suspend"

#: builtins/suspend.def:111
msgid "cannot suspend a login shell"
msgstr "cannot suspend a login shell"

#: builtins/type.def:234
#, c-format
msgid "%s is aliased to `%s'\n"
msgstr "%s is aliased to ‘%s’\n"

#: builtins/type.def:255
#, c-format
msgid "%s is a shell keyword\n"
msgstr "%s is a shell keyword\n"

#: builtins/type.def:274
#, c-format
msgid "%s is a function\n"
msgstr "%s is a function\n"

#: builtins/type.def:296
#, c-format
msgid "%s is a shell builtin\n"
msgstr "%s is a shell builtin\n"

#: builtins/type.def:317 builtins/type.def:391
#, c-format
msgid "%s is %s\n"
msgstr "%s is %s\n"

#: builtins/type.def:337
#, c-format
msgid "%s is hashed (%s)\n"
msgstr "%s is hashed (%s)\n"

#: builtins/ulimit.def:372
#, c-format
msgid "%s: invalid limit argument"
msgstr "%s: invalid limit argument"

#: builtins/ulimit.def:398
#, c-format
msgid "`%c': bad command"
msgstr "‘%c’: bad command"

#: builtins/ulimit.def:427
#, c-format
msgid "%s: cannot get limit: %s"
msgstr "%s: cannot get limit: %s"

#: builtins/ulimit.def:453
msgid "limit"
msgstr "limit"

#: builtins/ulimit.def:465 builtins/ulimit.def:765
#, c-format
msgid "%s: cannot modify limit: %s"
msgstr "%s: cannot modify limit: %s"

#: builtins/umask.def:118
msgid "octal number"
msgstr "octal number"

#: builtins/umask.def:231
#, c-format
msgid "`%c': invalid symbolic mode operator"
msgstr "‘%c’: invalid symbolic mode operator"

#: builtins/umask.def:286
#, c-format
msgid "`%c': invalid symbolic mode character"
msgstr "‘%c’: invalid symbolic mode character"

#: error.c:90 error.c:321 error.c:323 error.c:325
msgid " line "
msgstr " line "

#: error.c:165
#, c-format
msgid "last command: %s\n"
msgstr "last command: %s\n"

#: error.c:173
#, c-format
msgid "Aborting..."
msgstr "Aborting..."

#: error.c:406
msgid "unknown command error"
msgstr "unknown command error"

#: error.c:407
msgid "bad command type"
msgstr "bad command type"

#: error.c:408
msgid "bad connector"
msgstr "bad connector"

#: error.c:409
msgid "bad jump"
msgstr "bad jump"

#: error.c:447
#, c-format
msgid "%s: unbound variable"
msgstr "%s: unbound variable"

#: eval.c:181
#, c-format
msgid "timed out waiting for input: auto-logout\n"
msgstr "timed out waiting for input: auto-logout\n"

#: execute_cmd.c:497
#, c-format
msgid "cannot redirect standard input from /dev/null: %s"
msgstr "cannot redirect standard input from /dev/null: %s"

#: execute_cmd.c:1162
#, c-format
msgid "TIMEFORMAT: `%c': invalid format character"
msgstr "TIMEFORMAT: ‘%c’: invalid format character"

#: execute_cmd.c:2075
msgid "pipe error"
msgstr "pipe error"

#: execute_cmd.c:4481
#, c-format
msgid "%s: restricted: cannot specify `/' in command names"
msgstr "%s: restricted: cannot specify ‘/’ in command names"

#: execute_cmd.c:4572
#, c-format
msgid "%s: command not found"
msgstr "%s: command not found"

#: execute_cmd.c:4827
#, c-format
msgid "%s: %s: bad interpreter"
msgstr "%s: %s: bad interpreter"

#: execute_cmd.c:4976
#, c-format
msgid "cannot duplicate fd %d to fd %d"
msgstr "cannot duplicate fd %d to fd %d"

#: expr.c:241
msgid "expression recursion level exceeded"
msgstr "expression recursion level exceeded"

#: expr.c:265
msgid "recursion stack underflow"
msgstr "recursion stack underflow"

#: expr.c:379
msgid "syntax error in expression"
msgstr "syntax error in expression"

#: expr.c:419
msgid "attempted assignment to non-variable"
msgstr "attempted assignment to non-variable"

#: expr.c:440 expr.c:445 expr.c:756
msgid "division by 0"
msgstr "division by 0"

#: expr.c:471
msgid "bug: bad expassign token"
msgstr "bug: bad expassign token"

#: expr.c:513
msgid "`:' expected for conditional expression"
msgstr "‘:’ expected for conditional expression"

#: expr.c:781
msgid "exponent less than 0"
msgstr "exponent less than 0"

#: expr.c:826
msgid "identifier expected after pre-increment or pre-decrement"
msgstr "identifier expected after pre-increment or pre-decrement"

#: expr.c:854
msgid "missing `)'"
msgstr "missing ‘)’"

#: expr.c:897 expr.c:1176
msgid "syntax error: operand expected"
msgstr "syntax error: operand expected"

#: expr.c:1178
msgid "syntax error: invalid arithmetic operator"
msgstr "syntax error: invalid arithmetic operator"

#: expr.c:1202
#, c-format
msgid "%s%s%s: %s (error token is \"%s\")"
msgstr "%s%s%s: %s (error token is “%s”)"

#: expr.c:1260
msgid "invalid arithmetic base"
msgstr "invalid arithmetic base"

#: expr.c:1280
msgid "value too great for base"
msgstr "value too great for base"

#: expr.c:1329
#, c-format
msgid "%s: expression error\n"
msgstr "%s: expression error\n"

#: general.c:61
msgid "getcwd: cannot access parent directories"
msgstr "getcwd: cannot access parent directories"

#: input.c:94 subst.c:4857
#, c-format
msgid "cannot reset nodelay mode for fd %d"
msgstr "cannot reset nodelay mode for fd %d"

#: input.c:258
#, c-format
msgid "cannot allocate new file descriptor for bash input from fd %d"
msgstr "cannot allocate new file descriptor for bash input from fd %d"

#: input.c:266
#, c-format
msgid "save_bash_input: buffer already exists for new fd %d"
msgstr "save_bash_input: buffer already exists for new fd %d"

#: jobs.c:466
msgid "start_pipeline: pgrp pipe"
msgstr "start_pipeline: pgrp pipe"

#: jobs.c:887
#, c-format
msgid "forked pid %d appears in running job %d"
msgstr "forked pid %d appears in running job %d"

#: jobs.c:1005
#, c-format
msgid "deleting stopped job %d with process group %ld"
msgstr "deleting stopped job %d with process group %ld"

#: jobs.c:1110
#, c-format
msgid "add_process: process %5ld (%s) in the_pipeline"
msgstr "add_process: process %5ld (%s) in the_pipeline"

#: jobs.c:1113
#, c-format
msgid "add_process: pid %5ld (%s) marked as still alive"
msgstr "add_process: pid %5ld (%s) marked as still alive"

#: jobs.c:1401
#, c-format
msgid "describe_pid: %ld: no such pid"
msgstr "describe_pid: %ld: no such pid"

#: jobs.c:1416
#, c-format
msgid "Signal %d"
msgstr "Signal %d"

#: jobs.c:1430 jobs.c:1455
msgid "Done"
msgstr "Done"

#: jobs.c:1435 siglist.c:123
msgid "Stopped"
msgstr "Stopped"

#: jobs.c:1439
#, c-format
msgid "Stopped(%s)"
msgstr "Stopped(%s)"

#: jobs.c:1443
msgid "Running"
msgstr "Running"

#: jobs.c:1457
#, c-format
msgid "Done(%d)"
msgstr "Done(%d)"

#: jobs.c:1459
#, c-format
msgid "Exit %d"
msgstr "Exit %d"

#: jobs.c:1462
msgid "Unknown status"
msgstr "Unknown status"

#: jobs.c:1549
#, c-format
msgid "(core dumped) "
msgstr "(core dumped) "

#: jobs.c:1568
#, c-format
msgid "  (wd: %s)"
msgstr "  (wd: %s)"

#: jobs.c:1776
#, c-format
msgid "child setpgid (%ld to %ld)"
msgstr "child setpgid (%ld to %ld)"

#: jobs.c:2104 nojobs.c:585
#, c-format
msgid "wait: pid %ld is not a child of this shell"
msgstr "wait: pid %ld is not a child of this shell"

#: jobs.c:2331
#, c-format
msgid "wait_for: No record of process %ld"
msgstr "wait_for: No record of process %ld"

#: jobs.c:2607
#, c-format
msgid "wait_for_job: job %d is stopped"
msgstr "wait_for_job: job %d is stopped"

#: jobs.c:2829
#, c-format
msgid "%s: job has terminated"
msgstr "%s: job has terminated"

#: jobs.c:2838
#, c-format
msgid "%s: job %d already in background"
msgstr "%s: job %d already in background"

#: jobs.c:3059
msgid "waitchld: turning on WNOHANG to avoid indefinite block"
msgstr "waitchld: turning on WNOHANG to avoid indefinite block"

#: jobs.c:3508
#, c-format
msgid "%s: line %d: "
msgstr "%s: line %d: "

#: jobs.c:3522 nojobs.c:814
#, c-format
msgid " (core dumped)"
msgstr " (core dumped)"

#: jobs.c:3534 jobs.c:3547
#, c-format
msgid "(wd now: %s)\n"
msgstr "(wd now: %s)\n"

#: jobs.c:3579
msgid "initialize_job_control: getpgrp failed"
msgstr "initialize_job_control: getpgrp failed"

#: jobs.c:3639
msgid "initialize_job_control: line discipline"
msgstr "initialize_job_control: line discipline"

#: jobs.c:3649
msgid "initialize_job_control: setpgid"
msgstr "initialize_job_control: setpgid"

#: jobs.c:3677
#, c-format
msgid "cannot set terminal process group (%d)"
msgstr "cannot set terminal process group (%d)"

#: jobs.c:3682
msgid "no job control in this shell"
msgstr "no job control in this shell"

#: lib/malloc/malloc.c:296
#, c-format
msgid "malloc: failed assertion: %s\n"
msgstr "malloc: failed assertion: %s\n"

#: lib/malloc/malloc.c:312
#, c-format
msgid ""
"\r\n"
"malloc: %s:%d: assertion botched\r\n"
msgstr ""
"\r\n"
"malloc: %s:%d: assertion botched\r\n"

#: lib/malloc/malloc.c:313
msgid "unknown"
msgstr "unknown"

#: lib/malloc/malloc.c:797
msgid "malloc: block on free list clobbered"
msgstr "malloc: block on free list clobbered"

#: lib/malloc/malloc.c:874
msgid "free: called with already freed block argument"
msgstr "free: called with already freed block argument"

#: lib/malloc/malloc.c:877
msgid "free: called with unallocated block argument"
msgstr "free: called with unallocated block argument"

#: lib/malloc/malloc.c:896
msgid "free: underflow detected; mh_nbytes out of range"
msgstr "free: underflow detected; mh_nbytes out of range"

#: lib/malloc/malloc.c:902
msgid "free: start and end chunk sizes differ"
msgstr "free: start and end chunk sizes differ"

#: lib/malloc/malloc.c:1001
msgid "realloc: called with unallocated block argument"
msgstr "realloc: called with unallocated block argument"

#: lib/malloc/malloc.c:1016
msgid "realloc: underflow detected; mh_nbytes out of range"
msgstr "realloc: underflow detected; mh_nbytes out of range"

#: lib/malloc/malloc.c:1022
msgid "realloc: start and end chunk sizes differ"
msgstr "realloc: start and end chunk sizes differ"

#: lib/malloc/table.c:177
#, c-format
msgid "register_alloc: alloc table is full with FIND_ALLOC?\n"
msgstr "register_alloc: alloc table is full with FIND_ALLOC?\n"

#: lib/malloc/table.c:184
#, c-format
msgid "register_alloc: %p already in table as allocated?\n"
msgstr "register_alloc: %p already in table as allocated?\n"

#: lib/malloc/table.c:220
#, c-format
msgid "register_free: %p already in table as free?\n"
msgstr "register_free: %p already in table as free?\n"

#: lib/sh/fmtulong.c:101
msgid "invalid base"
msgstr "invalid base"

#: lib/sh/netopen.c:168
#, c-format
msgid "%s: host unknown"
msgstr "%s: host unknown"

#: lib/sh/netopen.c:175
#, c-format
msgid "%s: invalid service"
msgstr "%s: invalid service"

#: lib/sh/netopen.c:306
#, c-format
msgid "%s: bad network path specification"
msgstr "%s: bad network path specification"

#: lib/sh/netopen.c:346
msgid "network operations not supported"
msgstr "network operations not supported"

#: locale.c:192
#, c-format
msgid "setlocale: LC_ALL: cannot change locale (%s)"
msgstr "setlocale: LC_ALL: cannot change locale (%s)"

#: locale.c:194
#, c-format
msgid "setlocale: LC_ALL: cannot change locale (%s): %s"
msgstr "setlocale: LC_ALL: cannot change locale (%s): %s"

#: locale.c:247
#, c-format
msgid "setlocale: %s: cannot change locale (%s)"
msgstr "setlocale: %s: cannot change locale (%s)"

#: locale.c:249
#, c-format
msgid "setlocale: %s: cannot change locale (%s): %s"
msgstr "setlocale: %s: cannot change locale (%s): %s"

#: mailcheck.c:433
msgid "You have mail in $_"
msgstr "You have mail in $_"

#: mailcheck.c:458
msgid "You have new mail in $_"
msgstr "You have new mail in $_"

#: mailcheck.c:474
#, c-format
msgid "The mail in %s has been read\n"
msgstr "The mail in %s has been read\n"

#: make_cmd.c:323
msgid "syntax error: arithmetic expression required"
msgstr "syntax error: arithmetic expression required"

#: make_cmd.c:325
msgid "syntax error: `;' unexpected"
msgstr "syntax error: ‘;’ unexpected"

#: make_cmd.c:326
#, c-format
msgid "syntax error: `((%s))'"
msgstr "syntax error: ‘((%s))’"

#: make_cmd.c:575
#, c-format
msgid "make_here_document: bad instruction type %d"
msgstr "make_here_document: bad instruction type %d"

#: make_cmd.c:659
#, c-format
msgid "here-document at line %d delimited by end-of-file (wanted `%s')"
msgstr "here-document at line %d delimited by end-of-file (wanted ‘%s’)"

#: make_cmd.c:756
#, c-format
msgid "make_redirection: redirection instruction `%d' out of range"
msgstr "make_redirection: redirection instruction ‘%d’ out of range"

#: parse.y:3133 parse.y:3369
#, c-format
msgid "unexpected EOF while looking for matching `%c'"
msgstr "unexpected EOF while looking for matching ‘%c’"

#: parse.y:3951
msgid "unexpected EOF while looking for `]]'"
msgstr "unexpected EOF while looking for ‘]]’"

#: parse.y:3956
#, c-format
msgid "syntax error in conditional expression: unexpected token `%s'"
msgstr "syntax error in conditional expression: unexpected token ‘%s’"

#: parse.y:3960
msgid "syntax error in conditional expression"
msgstr "syntax error in conditional expression"

#: parse.y:4038
#, c-format
msgid "unexpected token `%s', expected `)'"
msgstr "unexpected token ‘%s’, expected ‘)’"

#: parse.y:4042
msgid "expected `)'"
msgstr "expected ‘)’"

#: parse.y:4070
#, c-format
msgid "unexpected argument `%s' to conditional unary operator"
msgstr "unexpected argument ‘%s’ to conditional unary operator"

#: parse.y:4074
msgid "unexpected argument to conditional unary operator"
msgstr "unexpected argument to conditional unary operator"

#: parse.y:4120
#, c-format
msgid "unexpected token `%s', conditional binary operator expected"
msgstr "unexpected token ‘%s’, conditional binary operator expected"

#: parse.y:4124
msgid "conditional binary operator expected"
msgstr "conditional binary operator expected"

#: parse.y:4146
#, c-format
msgid "unexpected argument `%s' to conditional binary operator"
msgstr "unexpected argument ‘%s’ to conditional binary operator"

#: parse.y:4150
msgid "unexpected argument to conditional binary operator"
msgstr "unexpected argument to conditional binary operator"

#: parse.y:4161
#, c-format
msgid "unexpected token `%c' in conditional command"
msgstr "unexpected token ‘%c’ in conditional command"

#: parse.y:4164
#, c-format
msgid "unexpected token `%s' in conditional command"
msgstr "unexpected token ‘%s’ in conditional command"

#: parse.y:4168
#, c-format
msgid "unexpected token %d in conditional command"
msgstr "unexpected token %d in conditional command"

#: parse.y:5459
#, c-format
msgid "syntax error near unexpected token `%s'"
msgstr "syntax error near unexpected token ‘%s’"

#: parse.y:5477
#, c-format
msgid "syntax error near `%s'"
msgstr "syntax error near ‘%s’"

#: parse.y:5487
msgid "syntax error: unexpected end of file"
msgstr "syntax error: unexpected end of file"

#: parse.y:5487
msgid "syntax error"
msgstr "syntax error"

#: parse.y:5549
#, c-format
msgid "Use \"%s\" to leave the shell.\n"
msgstr "Use “%s” to leave the shell.\n"

#: parse.y:5711
msgid "unexpected EOF while looking for matching `)'"
msgstr "unexpected EOF while looking for matching ‘)’"

#: pcomplete.c:1030
#, c-format
msgid "completion: function `%s' not found"
msgstr "completion: function ‘%s’ not found"

#: pcomplib.c:179
#, c-format
msgid "progcomp_insert: %s: NULL COMPSPEC"
msgstr "progcomp_insert: %s: NULL COMPSPEC"

#: print_cmd.c:290
#, c-format
msgid "print_command: bad connector `%d'"
msgstr "print_command: bad connector ‘%d’"

#: print_cmd.c:363
#, c-format
msgid "xtrace_set: %d: invalid file descriptor"
msgstr "xtrace_set: %d: invalid file descriptor"

#: print_cmd.c:368
msgid "xtrace_set: NULL file pointer"
msgstr "xtrace_set: NULL file pointer"

#: print_cmd.c:372
#, c-format
msgid "xtrace fd (%d) != fileno xtrace fp (%d)"
msgstr "xtrace fd (%d) != fileno xtrace fp (%d)"

#: print_cmd.c:1461
#, c-format
msgid "cprintf: `%c': invalid format character"
msgstr "cprintf: ‘%c’: invalid format character"

#: redir.c:110
msgid "file descriptor out of range"
msgstr "file descriptor out of range"

#: redir.c:166
#, c-format
msgid "%s: ambiguous redirect"
msgstr "%s: ambiguous redirect"

#: redir.c:170
#, c-format
msgid "%s: cannot overwrite existing file"
msgstr "%s: cannot overwrite existing file"

#: redir.c:175
#, c-format
msgid "%s: restricted: cannot redirect output"
msgstr "%s: restricted: cannot redirect output"

#: redir.c:180
#, c-format
msgid "cannot create temp file for here-document: %s"
msgstr "cannot create temp file for here-document: %s"

#: redir.c:184
#, c-format
msgid "%s: cannot assign fd to variable"
msgstr "%s: cannot assign fd to variable"

#: redir.c:544
msgid "/dev/(tcp|udp)/host/port not supported without networking"
msgstr "/dev/(tcp|udp)/host/port not supported without networking"

#: redir.c:1101
msgid "redirection error: cannot duplicate fd"
msgstr "redirection error: cannot duplicate fd"

#: shell.c:332
msgid "could not find /tmp, please create!"
msgstr "could not find /tmp, please create!"

#: shell.c:336
msgid "/tmp must be a valid directory name"
msgstr "/tmp must be a valid directory name"

#: shell.c:884
#, c-format
msgid "%c%c: invalid option"
msgstr "%c%c: invalid option"

#: shell.c:1651
msgid "I have no name!"
msgstr "I have no name!"

#: shell.c:1793
#, c-format
msgid "GNU bash, version %s-(%s)\n"
msgstr "GNU bash, version %s-(%s)\n"

#: shell.c:1794
#, c-format
msgid ""
"Usage:\t%s [GNU long option] [option] ...\n"
"\t%s [GNU long option] [option] script-file ...\n"
msgstr ""
"Usage:\t%s [GNU long option] [option] ...\n"
"\t%s [GNU long option] [option] script-file ...\n"

#: shell.c:1796
msgid "GNU long options:\n"
msgstr "GNU long options:\n"

#: shell.c:1800
msgid "Shell options:\n"
msgstr "Shell options:\n"

#: shell.c:1801
msgid "\t-irsD or -c command or -O shopt_option\t\t(invocation only)\n"
msgstr "\t-irsD or -c command or -O shopt_option\t\t(invocation only)\n"

#: shell.c:1816
#, c-format
msgid "\t-%s or -o option\n"
msgstr "\t-%s or -o option\n"

#: shell.c:1822
#, c-format
msgid "Type `%s -c \"help set\"' for more information about shell options.\n"
msgstr "Type ‘%s -c “help set”’ for more information about shell options.\n"

#: shell.c:1823
#, c-format
msgid "Type `%s -c help' for more information about shell builtin commands.\n"
msgstr "Type ‘%s -c help’ for more information about shell builtin commands.\n"

#: shell.c:1824
#, c-format
msgid "Use the `bashbug' command to report bugs.\n"
msgstr "Use the ‘bashbug’ command to report bugs.\n"

#: sig.c:626
#, c-format
msgid "sigprocmask: %d: invalid operation"
msgstr "sigprocmask: %d: invalid operation"

#: siglist.c:48
msgid "Bogus signal"
msgstr "Bogus signal"

#: siglist.c:51
msgid "Hangup"
msgstr "Hangup"

#: siglist.c:55
msgid "Interrupt"
msgstr "Interrupt"

#: siglist.c:59
msgid "Quit"
msgstr "Quit"

#: siglist.c:63
msgid "Illegal instruction"
msgstr "Illegal instruction"

#: siglist.c:67
msgid "BPT trace/trap"
msgstr "BPT trace/trap"

#: siglist.c:75
msgid "ABORT instruction"
msgstr "ABORT instruction"

#: siglist.c:79
msgid "EMT instruction"
msgstr "EMT instruction"

#: siglist.c:83
msgid "Floating point exception"
msgstr "Floating point exception"

#: siglist.c:87
msgid "Killed"
msgstr "Killed"

#: siglist.c:91
msgid "Bus error"
msgstr "Bus error"

#: siglist.c:95
msgid "Segmentation fault"
msgstr "Segmentation fault"

#: siglist.c:99
msgid "Bad system call"
msgstr "Bad system call"

#: siglist.c:103
msgid "Broken pipe"
msgstr "Broken pipe"

#: siglist.c:107
msgid "Alarm clock"
msgstr "Alarm clock"

#: siglist.c:111
msgid "Terminated"
msgstr "Terminated"

#: siglist.c:115
msgid "Urgent IO condition"
msgstr "Urgent IO condition"

#: siglist.c:119
msgid "Stopped (signal)"
msgstr "Stopped (signal)"

#: siglist.c:127
msgid "Continue"
msgstr "Continue"

#: siglist.c:135
msgid "Child death or stop"
msgstr "Child death or stop"

#: siglist.c:139
msgid "Stopped (tty input)"
msgstr "Stopped (tty input)"

#: siglist.c:143
msgid "Stopped (tty output)"
msgstr "Stopped (tty output)"

#: siglist.c:147
msgid "I/O ready"
msgstr "I/O ready"

#: siglist.c:151
msgid "CPU limit"
msgstr "CPU limit"

#: siglist.c:155
msgid "File limit"
msgstr "File limit"

#: siglist.c:159
msgid "Alarm (virtual)"
msgstr "Alarm (virtual)"

#: siglist.c:163
msgid "Alarm (profile)"
msgstr "Alarm (profile)"

#: siglist.c:167
msgid "Window changed"
msgstr "Window changed"

#: siglist.c:171
msgid "Record lock"
msgstr "Record lock"

#: siglist.c:175
msgid "User signal 1"
msgstr "User signal 1"

#: siglist.c:179
msgid "User signal 2"
msgstr "User signal 2"

#: siglist.c:183
msgid "HFT input data pending"
msgstr "HFT input data pending"

#: siglist.c:187
msgid "power failure imminent"
msgstr "power failure imminent"

#: siglist.c:191
msgid "system crash imminent"
msgstr "system crash imminent"

#: siglist.c:195
msgid "migrate process to another CPU"
msgstr "migrate process to another CPU"

#: siglist.c:199
msgid "programming error"
msgstr "programming error"

#: siglist.c:203
msgid "HFT monitor mode granted"
msgstr "HFT monitor mode granted"

#: siglist.c:207
msgid "HFT monitor mode retracted"
msgstr "HFT monitor mode retracted"

#: siglist.c:211
msgid "HFT sound sequence has completed"
msgstr "HFT sound sequence has completed"

#: siglist.c:215
msgid "Information request"
msgstr "Information request"

#: siglist.c:223
msgid "Unknown Signal #"
msgstr "Unknown Signal #"

#: siglist.c:225
#, c-format
msgid "Unknown Signal #%d"
msgstr "Unknown Signal #%d"

#: subst.c:1333 subst.c:1454
#, c-format
msgid "bad substitution: no closing `%s' in %s"
msgstr "bad substitution: no closing ‘%s’ in %s"

#: subst.c:2735
#, c-format
msgid "%s: cannot assign list to array member"
msgstr "%s: cannot assign list to array member"

#: subst.c:4754 subst.c:4770
msgid "cannot make pipe for process substitution"
msgstr "cannot make pipe for process substitution"

#: subst.c:4802
msgid "cannot make child for process substitution"
msgstr "cannot make child for process substitution"

#: subst.c:4847
#, c-format
msgid "cannot open named pipe %s for reading"
msgstr "cannot open named pipe %s for reading"

#: subst.c:4849
#, c-format
msgid "cannot open named pipe %s for writing"
msgstr "cannot open named pipe %s for writing"

#: subst.c:4867
#, c-format
msgid "cannot duplicate named pipe %s as fd %d"
msgstr "cannot duplicate named pipe %s as fd %d"

#: subst.c:5063
msgid "cannot make pipe for command substitution"
msgstr "cannot make pipe for command substitution"

#: subst.c:5097
msgid "cannot make child for command substitution"
msgstr "cannot make child for command substitution"

#: subst.c:5114
msgid "command_substitute: cannot duplicate pipe as fd 1"
msgstr "command_substitute: cannot duplicate pipe as fd 1"

#: subst.c:5617
#, c-format
msgid "%s: parameter null or not set"
msgstr "%s: parameter null or not set"

#: subst.c:5907
#, c-format
msgid "%s: substring expression < 0"
msgstr "%s: substring expression < 0"

#: subst.c:6965
#, c-format
msgid "%s: bad substitution"
msgstr "%s: bad substitution"

#: subst.c:7045
#, c-format
msgid "$%s: cannot assign in this way"
msgstr "$%s: cannot assign in this way"

#: subst.c:7374
msgid ""
"future versions of the shell will force evaluation as an arithmetic "
"substitution"
msgstr ""
"future versions of the shell will force evaluation as an arithmetic "
"substitution"

#: subst.c:7839
#, c-format
msgid "bad substitution: no closing \"`\" in %s"
msgstr "bad substitution: no closing “`” in %s"

#: subst.c:8720
#, c-format
msgid "no match: %s"
msgstr "no match: %s"

#: test.c:146
msgid "argument expected"
msgstr "argument expected"

#: test.c:155
#, c-format
msgid "%s: integer expression expected"
msgstr "%s: integer expression expected"

#: test.c:263
msgid "`)' expected"
msgstr "‘)’ expected"

#: test.c:265
#, c-format
msgid "`)' expected, found %s"
msgstr "‘)’ expected, found %s"

#: test.c:280 test.c:693 test.c:696
#, c-format
msgid "%s: unary operator expected"
msgstr "%s: unary operator expected"

#: test.c:449 test.c:736
#, c-format
msgid "%s: binary operator expected"
msgstr "%s: binary operator expected"

#: test.c:811
msgid "missing `]'"
msgstr "missing ‘]’"

#: trap.c:203
msgid "invalid signal number"
msgstr "invalid signal number"

#: trap.c:327
#, c-format
msgid "run_pending_traps: bad value in trap_list[%d]: %p"
msgstr "run_pending_traps: bad value in trap_list[%d]: %p"

#: trap.c:331
#, c-format
msgid ""
"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"
msgstr ""
"run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself"

#: trap.c:380
#, c-format
msgid "trap_handler: bad signal %d"
msgstr "trap_handler: bad signal %d"

#: variables.c:363
#, c-format
msgid "error importing function definition for `%s'"
msgstr "error importing function definition for ‘%s’"

#: variables.c:748
#, c-format
msgid "shell level (%d) too high, resetting to 1"
msgstr "shell level (%d) too high, resetting to 1"

#: variables.c:1915
msgid "make_local_variable: no function context at current scope"
msgstr "make_local_variable: no function context at current scope"

#: variables.c:3159
msgid "all_local_variables: no function context at current scope"
msgstr "all_local_variables: no function context at current scope"

#: variables.c:3376
#, c-format
msgid "%s has null exportstr"
msgstr "%s has null exportstr"

#: variables.c:3381 variables.c:3390
#, c-format
msgid "invalid character %d in exportstr for %s"
msgstr "invalid character %d in exportstr for %s"

#: variables.c:3396
#, c-format
msgid "no `=' in exportstr for %s"
msgstr "no ‘=’ in exportstr for %s"

#: variables.c:3835
msgid "pop_var_context: head of shell_variables not a function context"
msgstr "pop_var_context: head of shell_variables not a function context"

#: variables.c:3848
msgid "pop_var_context: no global_variables context"
msgstr "pop_var_context: no global_variables context"

#: variables.c:3922
msgid "pop_scope: head of shell_variables not a temporary environment scope"
msgstr "pop_scope: head of shell_variables not a temporary environment scope"

#: variables.c:4678
#, c-format
msgid "%s: %s: cannot open as FILE"
msgstr "%s: %s: cannot open as FILE"

#: variables.c:4683
#, c-format
msgid "%s: %s: invalid value for trace file descriptor"
msgstr "%s: %s: invalid value for trace file descriptor"

#: version.c:46
msgid "Copyright (C) 2009 Free Software Foundation, Inc."
msgstr "Copyright (C) 2009 Free Software Foundation, Inc."

#: version.c:47
msgid ""
"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
"html>\n"
msgstr ""
"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
"html>\n"

#: version.c:86 version2.c:83
#, c-format
msgid "GNU bash, version %s (%s)\n"
msgstr "GNU bash, version %s (%s)\n"

#: version.c:91 version2.c:88
#, c-format
msgid "This is free software; you are free to change and redistribute it.\n"
msgstr "This is free software; you are free to change and redistribute it.\n"

#: version.c:92 version2.c:89
#, c-format
msgid "There is NO WARRANTY, to the extent permitted by law.\n"
msgstr "There is NO WARRANTY, to the extent permitted by law.\n"

#: version2.c:86
#, c-format
msgid "Copyright (C) 2009 Free Software Foundation, Inc.\n"
msgstr "Copyright (C) 2009 Free Software Foundation, Inc.\n"

#: version2.c:87
#, c-format
msgid ""
"License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
"html>\n"
msgstr ""
"License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl."
"html>\n"

#: xmalloc.c:91
#, c-format
msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)"
msgstr "%s: cannot allocate %lu bytes (%lu bytes allocated)"

#: xmalloc.c:93
#, c-format
msgid "%s: cannot allocate %lu bytes"
msgstr "%s: cannot allocate %lu bytes"

#: xmalloc.c:163
#, c-format
msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"
msgstr "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)"

#: xmalloc.c:165
#, c-format
msgid "%s: %s:%d: cannot allocate %lu bytes"
msgstr "%s: %s:%d: cannot allocate %lu bytes"

#: builtins.c:43
msgid "alias [-p] [name[=value] ... ]"
msgstr "alias [-p] [name[=value] ... ]"

#: builtins.c:47
msgid "unalias [-a] name [name ...]"
msgstr "unalias [-a] name [name ...]"

#: builtins.c:51
msgid ""
"bind [-lpvsPVS] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
"x keyseq:shell-command] [keyseq:readline-function or readline-command]"
msgstr ""
"bind [-lpvsPVS] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-"
"x keyseq:shell-command] [keyseq:readline-function or readline-command]"

#: builtins.c:54
msgid "break [n]"
msgstr "break [n]"

#: builtins.c:56
msgid "continue [n]"
msgstr "continue [n]"

#: builtins.c:58
msgid "builtin [shell-builtin [arg ...]]"
msgstr "builtin [shell-builtin [arg ...]]"

#: builtins.c:61
msgid "caller [expr]"
msgstr "caller [expr]"

#: builtins.c:64
msgid "cd [-L|-P] [dir]"
msgstr "cd [-L|-P] [dir]"

#: builtins.c:66
msgid "pwd [-LP]"
msgstr "pwd [-LP]"

#: builtins.c:68
msgid ":"
msgstr ":"

#: builtins.c:70
msgid "true"
msgstr "true"

#: builtins.c:72
msgid "false"
msgstr "false"

#: builtins.c:74
msgid "command [-pVv] command [arg ...]"
msgstr "command [-pVv] command [arg ...]"

#: builtins.c:76
msgid "declare [-aAfFilrtux] [-p] [name[=value] ...]"
msgstr "declare [-aAfFilrtux] [-p] [name[=value] ...]"

#: builtins.c:78
msgid "typeset [-aAfFilrtux] [-p] name[=value] ..."
msgstr "typeset [-aAfFilrtux] [-p] name[=value] ..."

#: builtins.c:80
msgid "local [option] name[=value] ..."
msgstr "local [option] name[=value] ..."

#: builtins.c:83
msgid "echo [-neE] [arg ...]"
msgstr "echo [-neE] [arg ...]"

#: builtins.c:87
msgid "echo [-n] [arg ...]"
msgstr "echo [-n] [arg ...]"

#: builtins.c:90
msgid "enable [-a] [-dnps] [-f filename] [name ...]"
msgstr "enable [-a] [-dnps] [-f filename] [name ...]"

#: builtins.c:92
msgid "eval [arg ...]"
msgstr "eval [arg ...]"

#: builtins.c:94
msgid "getopts optstring name [arg]"
msgstr "getopts optstring name [arg]"

#: builtins.c:96
msgid "exec [-cl] [-a name] [command [arguments ...]] [redirection ...]"
msgstr "exec [-cl] [-a name] [command [arguments ...]] [redirection ...]"

#: builtins.c:98
msgid "exit [n]"
msgstr "exit [n]"

#: builtins.c:100
msgid "logout [n]"
msgstr "logout [n]"

#: builtins.c:103
msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"
msgstr "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]"

#: builtins.c:107
msgid "fg [job_spec]"
msgstr "fg [job_spec]"

#: builtins.c:111
msgid "bg [job_spec ...]"
msgstr "bg [job_spec ...]"

#: builtins.c:114
msgid "hash [-lr] [-p pathname] [-dt] [name ...]"
msgstr "hash [-lr] [-p pathname] [-dt] [name ...]"

#: builtins.c:117
msgid "help [-dms] [pattern ...]"
msgstr "help [-dms] [pattern ...]"

#: builtins.c:121
msgid ""
"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
"[arg...]"
msgstr ""
"history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg "
"[arg...]"

#: builtins.c:125
msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"
msgstr "jobs [-lnprs] [jobspec ...] or jobs -x command [args]"

#: builtins.c:129
msgid "disown [-h] [-ar] [jobspec ...]"
msgstr "disown [-h] [-ar] [jobspec ...]"

#: builtins.c:132
msgid ""
"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
"[sigspec]"
msgstr ""
"kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l "
"[sigspec]"

#: builtins.c:134
msgid "let arg [arg ...]"
msgstr "let arg [arg ...]"

#: builtins.c:136
msgid ""
"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
"prompt] [-t timeout] [-u fd] [name ...]"
msgstr ""
"read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p "
"prompt] [-t timeout] [-u fd] [name ...]"

#: builtins.c:138
msgid "return [n]"
msgstr "return [n]"

#: builtins.c:140
msgid "set [--abefhkmnptuvxBCHP] [-o option-name] [arg ...]"
msgstr "set [--abefhkmnptuvxBCHP] [-o option-name] [arg ...]"

#: builtins.c:142
msgid "unset [-f] [-v] [name ...]"
msgstr "unset [-f] [-v] [name ...]"

#: builtins.c:144
msgid "export [-fn] [name[=value] ...] or export -p"
msgstr "export [-fn] [name[=value] ...] or export -p"

#: builtins.c:146
msgid "readonly [-af] [name[=value] ...] or readonly -p"
msgstr "readonly [-af] [name[=value] ...] or readonly -p"

#: builtins.c:148
msgid "shift [n]"
msgstr "shift [n]"

#: builtins.c:150
msgid "source filename [arguments]"
msgstr "source filename [arguments]"

#: builtins.c:152
msgid ". filename [arguments]"
msgstr ". filename [arguments]"

#: builtins.c:155
msgid "suspend [-f]"
msgstr "suspend [-f]"

#: builtins.c:158
msgid "test [expr]"
msgstr "test [expr]"

#: builtins.c:160
msgid "[ arg... ]"
msgstr "[ arg... ]"

#: builtins.c:162
msgid "times"
msgstr "times"

#: builtins.c:164
msgid "trap [-lp] [[arg] signal_spec ...]"
msgstr "trap [-lp] [[arg] signal_spec ...]"

#: builtins.c:166
msgid "type [-afptP] name [name ...]"
msgstr "type [-afptP] name [name ...]"

#: builtins.c:169
msgid "ulimit [-SHacdefilmnpqrstuvx] [limit]"
msgstr "ulimit [-SHacdefilmnpqrstuvx] [limit]"

#: builtins.c:172
msgid "umask [-p] [-S] [mode]"
msgstr "umask [-p] [-S] [mode]"

#: builtins.c:175
msgid "wait [id]"
msgstr "wait [id]"

#: builtins.c:179
msgid "wait [pid]"
msgstr "wait [pid]"

#: builtins.c:182
msgid "for NAME [in WORDS ... ] ; do COMMANDS; done"
msgstr "for NAME [in WORDS ... ] ; do COMMANDS; done"

#: builtins.c:184
msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done"
msgstr "for (( exp1; exp2; exp3 )); do COMMANDS; done"

#: builtins.c:186
msgid "select NAME [in WORDS ... ;] do COMMANDS; done"
msgstr "select NAME [in WORDS ... ;] do COMMANDS; done"

#: builtins.c:188
msgid "time [-p] pipeline"
msgstr "time [-p] pipeline"

#: builtins.c:190
msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"
msgstr "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac"

#: builtins.c:192
msgid ""
"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
"COMMANDS; ] fi"
msgstr ""
"if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else "
"COMMANDS; ] fi"

#: builtins.c:194
msgid "while COMMANDS; do COMMANDS; done"
msgstr "while COMMANDS; do COMMANDS; done"

#: builtins.c:196
msgid "until COMMANDS; do COMMANDS; done"
msgstr "until COMMANDS; do COMMANDS; done"

#: builtins.c:198
msgid "coproc [NAME] command [redirections]"
msgstr "coproc [NAME] command [redirections]"

#: builtins.c:200
msgid "function name { COMMANDS ; } or name () { COMMANDS ; }"
msgstr "function name { COMMANDS ; } or name () { COMMANDS ; }"

#: builtins.c:202
msgid "{ COMMANDS ; }"
msgstr "{ COMMANDS ; }"

#: builtins.c:204
msgid "job_spec [&]"
msgstr "job_spec [&]"

#: builtins.c:206
msgid "(( expression ))"
msgstr "(( expression ))"

#: builtins.c:208
msgid "[[ expression ]]"
msgstr "[[ expression ]]"

#: builtins.c:210
msgid "variables - Names and meanings of some shell variables"
msgstr "variables - Names and meanings of some shell variables"

#: builtins.c:213
msgid "pushd [-n] [+N | -N | dir]"
msgstr "pushd [-n] [+N | -N | dir]"

#: builtins.c:217
msgid "popd [-n] [+N | -N]"
msgstr "popd [-n] [+N | -N]"

#: builtins.c:221
msgid "dirs [-clpv] [+N] [-N]"
msgstr "dirs [-clpv] [+N] [-N]"

#: builtins.c:224
msgid "shopt [-pqsu] [-o] [optname ...]"
msgstr "shopt [-pqsu] [-o] [optname ...]"

#: builtins.c:226
msgid "printf [-v var] format [arguments]"
msgstr "printf [-v var] format [arguments]"

#: builtins.c:229
msgid ""
"complete [-abcdefgjksuv] [-pr] [-DE] [-o option] [-A action] [-G globpat] [-"
"W wordlist]  [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
"suffix] [name ...]"
msgstr ""
"complete [-abcdefgjksuv] [-pr] [-DE] [-o option] [-A action] [-G globpat] [-"
"W wordlist]  [-F function] [-C command] [-X filterpat] [-P prefix] [-S "
"suffix] [name ...]"

#: builtins.c:233
msgid ""
"compgen [-abcdefgjksuv] [-o option]  [-A action] [-G globpat] [-W wordlist]  "
"[-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"
msgstr ""
"compgen [-abcdefgjksuv] [-o option]  [-A action] [-G globpat] [-W wordlist]  "
"[-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]"

#: builtins.c:237
msgid "compopt [-o|+o option] [-DE] [name ...]"
msgstr "compopt [-o|+o option] [-DE] [name ...]"

#: builtins.c:240
msgid ""
"mapfile [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c "
"quantum] [array]"
msgstr ""
"mapfile [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c "
"quantum] [array]"

#: builtins.c:242
msgid ""
"readarray [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c "
"quantum] [array]"
msgstr ""
"readarray [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c "
"quantum] [array]"

#: builtins.c:254
msgid ""
"Define or display aliases.\n"
"    \n"
"    Without arguments, `alias' prints the list of aliases in the reusable\n"
"    form `alias NAME=VALUE' on standard output.\n"
"    \n"
"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
"    A trailing space in VALUE causes the next word to be checked for\n"
"    alias substitution when the alias is expanded.\n"
"    \n"
"    Options:\n"
"      -p\tPrint all defined aliases in a reusable format\n"
"    \n"
"    Exit Status:\n"
"    alias returns true unless a NAME is supplied for which no alias has "
"been\n"
"    defined."
msgstr ""
"Define or display aliases.\n"
"    \n"
"    Without arguments, ‘alias’ prints the list of aliases in the reusable\n"
"    form ‘alias NAME=VALUE’ on standard output.\n"
"    \n"
"    Otherwise, an alias is defined for each NAME whose VALUE is given.\n"
"    A trailing space in VALUE causes the next word to be checked for\n"
"    alias substitution when the alias is expanded.\n"
"    \n"
"    Options:\n"
"      -p\tPrint all defined aliases in a reusable format\n"
"    \n"
"    Exit Status:\n"
"    alias returns true unless a NAME is supplied for which no alias has "
"been\n"
"    defined."

#: builtins.c:276
msgid ""
"Remove each NAME from the list of defined aliases.\n"
"    \n"
"    Options:\n"
"      -a\tremove all alias definitions.\n"
"    \n"
"    Return success unless a NAME is not an existing alias."
msgstr ""
"Remove each NAME from the list of defined aliases.\n"
"    \n"
"    Options:\n"
"      -a\tremove all alias definitions.\n"
"    \n"
"    Return success unless a NAME is not an existing alias."

#: builtins.c:289
msgid ""
"Set Readline key bindings and variables.\n"
"    \n"
"    Bind a key sequence to a Readline function or a macro, or set a\n"
"    Readline variable.  The non-option argument syntax is equivalent to\n"
"    that found in ~/.inputrc, but must be passed as a single argument:\n"
"    e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n"
"    \n"
"    Options:\n"
"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
"                         command.  Acceptable keymap names are emacs,\n"
"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
"move,\n"
"                         vi-command, and vi-insert.\n"
"      -l                 List names of functions.\n"
"      -P                 List function names and bindings.\n"
"      -p                 List functions and bindings in a form that can be\n"
"                         reused as input.\n"
"      -S                 List key sequences that invoke macros and their "
"values\n"
"      -s                 List key sequences that invoke macros and their "
"values\n"
"                         in a form that can be reused as input.\n"
"      -V                 List variable names and values\n"
"      -v                 List variable names and values in a form that can\n"
"                         be reused as input.\n"
"      -q  function-name  Query about which keys invoke the named function.\n"
"      -u  function-name  Unbind all keys which are bound to the named "
"function.\n"
"      -r  keyseq         Remove the binding for KEYSEQ.\n"
"      -f  filename       Read key bindings from FILENAME.\n"
"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
"    \t\t\t\tKEYSEQ is entered.\n"
"    \n"
"    Exit Status:\n"
"    bind returns 0 unless an unrecognized option is given or an error occurs."
msgstr ""
"Set Readline key bindings and variables.\n"
"    \n"
"    Bind a key sequence to a Readline function or a macro, or set a\n"
"    Readline variable.  The non-option argument syntax is equivalent to\n"
"    that found in ~/.inputrc, but must be passed as a single argument:\n"
"    e.g., bind '“\\C-x\\C-r”: re-read-init-file'.\n"
"    \n"
"    Options:\n"
"      -m  keymap         Use KEYMAP as the keymap for the duration of this\n"
"                         command.  Acceptable keymap names are emacs,\n"
"                         emacs-standard, emacs-meta, emacs-ctlx, vi, vi-"
"move,\n"
"                         vi-command, and vi-insert.\n"
"      -l                 List names of functions.\n"
"      -P                 List function names and bindings.\n"
"      -p                 List functions and bindings in a form that can be\n"
"                         reused as input.\n"
"      -S                 List key sequences that invoke macros and their "
"values\n"
"      -s                 List key sequences that invoke macros and their "
"values\n"
"                         in a form that can be reused as input.\n"
"      -V                 List variable names and values\n"
"      -v                 List variable names and values in a form that can\n"
"                         be reused as input.\n"
"      -q  function-name  Query about which keys invoke the named function.\n"
"      -u  function-name  Unbind all keys which are bound to the named "
"function.\n"
"      -r  keyseq         Remove the binding for KEYSEQ.\n"
"      -f  filename       Read key bindings from FILENAME.\n"
"      -x  keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n"
"    \t\t\t\tKEYSEQ is entered.\n"
"    \n"
"    Exit Status:\n"
"    bind returns 0 unless an unrecognized option is given or an error occurs."

#: builtins.c:326
msgid ""
"Exit for, while, or until loops.\n"
"    \n"
"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
"    loops.\n"
"    \n"
"    Exit Status:\n"
"    The exit status is 0 unless N is not greater than or equal to 1."
msgstr ""
"Exit for, while, or until loops.\n"
"    \n"
"    Exit a FOR, WHILE or UNTIL loop.  If N is specified, break N enclosing\n"
"    loops.\n"
"    \n"
"    Exit Status:\n"
"    The exit status is 0 unless N is not greater than or equal to 1."

#: builtins.c:338
msgid ""
"Resume for, while, or until loops.\n"
"    \n"
"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
"    If N is specified, resumes the Nth enclosing loop.\n"
"    \n"
"    Exit Status:\n"
"    The exit status is 0 unless N is not greater than or equal to 1."
msgstr ""
"Resume for, while, or until loops.\n"
"    \n"
"    Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n"
"    If N is specified, resumes the Nth enclosing loop.\n"
"    \n"
"    Exit Status:\n"
"    The exit status is 0 unless N is not greater than or equal to 1."

#: builtins.c:350
msgid ""
"Execute shell builtins.\n"
"    \n"
"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
"    as a shell function, but need to execute the builtin within the "
"function.\n"
"    \n"
"    Exit Status:\n"
"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
"    not a shell builtin.."
msgstr ""
"Execute shell builtins.\n"
"    \n"
"    Execute SHELL-BUILTIN with arguments ARGs without performing command\n"
"    lookup.  This is useful when you wish to reimplement a shell builtin\n"
"    as a shell function, but need to execute the builtin within the "
"function.\n"
"    \n"
"    Exit Status:\n"
"    Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n"
"    not a shell builtin.."

#: builtins.c:365
msgid ""
"Return the context of the current subroutine call.\n"
"    \n"
"    Without EXPR, returns \"$line $filename\".  With EXPR, returns\n"
"    \"$line $subroutine $filename\"; this extra information can be used to\n"
"    provide a stack trace.\n"
"    \n"
"    The value of EXPR indicates how many call frames to go back before the\n"
"    current one; the top frame is frame 0.\n"
"    \n"
"    Exit Status:\n"
"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
"    is invalid."
msgstr ""
"Return the context of the current subroutine call.\n"
"    \n"
"    Without EXPR, returns “$line $filename”.  With EXPR, returns\n"
"    “$line $subroutine $filename”; this extra information can be used to\n"
"    provide a stack trace.\n"
"    \n"
"    The value of EXPR indicates how many call frames to go back before the\n"
"    current one; the top frame is frame 0.\n"
"    \n"
"    Exit Status:\n"
"    Returns 0 unless the shell is not executing a shell function or EXPR\n"
"    is invalid."

#: builtins.c:383
msgid ""
"Change the shell working directory.\n"
"    \n"
"    Change the current directory to DIR.  The default DIR is the value of "
"the\n"
"    HOME shell variable.\n"
"    \n"
"    The variable CDPATH defines the search path for the directory "
"containing\n"
"    DIR.  Alternative directory names in CDPATH are separated by a colon "
"(:).\n"
"    A null directory name is the same as the current directory.  If DIR "
"begins\n"
"    with a slash (/), then CDPATH is not used.\n"
"    \n"
"    If the directory is not found, and the shell option `cdable_vars' is "
"set,\n"
"    the word is assumed to be  a variable name.  If that variable has a "
"value,\n"
"    its value is used for DIR.\n"
"    \n"
"    Options:\n"
"        -L\tforce symbolic links to be followed\n"
"        -P\tuse the physical directory structure without following symbolic\n"
"    \tlinks\n"
"    \n"
"    The default is to follow symbolic links, as if `-L' were specified.\n"
"    \n"
"    Exit Status:\n"
"    Returns 0 if the directory is changed; non-zero otherwise."
msgstr ""
"Change the shell working directory.\n"
"    \n"
"    Change the current directory to DIR.  The default DIR is the value of "
"the\n"
"    HOME shell variable.\n"
"    \n"
"    The variable CDPATH defines the search path for the directory "
"containing\n"
"    DIR.  Alternative directory names in CDPATH are separated by a colon "
"(:).\n"
"    A null directory name is the same as the current directory.  If DIR "
"begins\n"
"    with a slash (/), then CDPATH is not used.\n"
"    \n"
"    If the directory is not found, and the shell option ‘cdable_vars’ is "
"set,\n"
"    the word is assumed to be  a variable name.  If that variable has a "
"value,\n"
"    its value is used for DIR.\n"
"    \n"
"    Options:\n"
"        -L\tforce symbolic links to be followed\n"
"        -P\tuse the physical directory structure without following symbolic\n"
"    \tlinks\n"
"    \n"
"    The default is to follow symbolic links, as if ‘-L’ were specified.\n"
"    \n"
"    Exit Status:\n"
"    Returns 0 if the directory is changed; non-zero otherwise."

#: builtins.c:411
msgid ""
"Print the name of the current working directory.\n"
"    \n"
"    Options:\n"
"      -L\tprint the value of $PWD if it names the current working\n"
"    \tdirectory\n"
"      -P\tprint the physical directory, without any symbolic links\n"
"    \n"
"    By default, `pwd' behaves as if `-L' were specified.\n"
"    \n"
"    Exit Status:\n"
"    Returns 0 unless an invalid option is given or the current directory\n"
"    cannot be read."
msgstr ""
"Print the name of the current working directory.\n"
"    \n"
"    Options:\n"
"      -L\tprint the value of $PWD if it names the current working\n"
"    \tdirectory\n"
"      -P\tprint the physical directory, without any symbolic links\n"
"    \n"
"    By default, ‘pwd’ behaves as if ‘-L’ were specified.\n"
"    \n"
"    Exit Status:\n"
"    Returns 0 unless an invalid option is given or the current directory\n"
"    cannot be read."

#: builtins.c:428
msgid ""
"Null command.\n"
"    \n"
"    No effect; the command does nothing.\n"
"    \n"
"    Exit Status:\n"
"    Always succeeds."
msgstr ""
"Null command.\n"
"    \n"
"    No effect; the command does nothing.\n"
"    \n"
"    Exit Status:\n"
"    Always succeeds."

#: builtins.c:439
msgid ""
"Return a successful result.\n"
"    \n"
"    Exit Status:\n"
"    Always succeeds."
msgstr ""
"Return a successful result.\n"
"    \n"
"    Exit Status:\n"
"    Always succeeds."

#: builtins.c:448
msgid ""
"Return an unsuccessful result.\n"
"    \n"
"    Exit Status:\n"
"    Always fails."
msgstr ""
"Return an unsuccessful result.\n"
"    \n"
"    Exit Status:\n"
"    Always fails."

#: builtins.c:457
msgid ""
"Execute a simple command or display information about commands.\n"
"    \n"
"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
"    information about the specified COMMANDs.  Can be used to invoke "
"commands\n"
"    on disk when a function with the same name exists.\n"
"    \n"
"    Options:\n"
"      -p\tuse a default value for PATH that is guaranteed to find all of\n"
"    \tthe standard utilities\n"
"      -v\tprint a description of COMMAND similar to the `type' builtin\n"
"      -V\tprint a more verbose description of each COMMAND\n"
"    \n"
"    Exit Status:\n"
"    Returns exit status of COMMAND, or failure if COMMAND is not found."
msgstr ""
"Execute a simple command or display information about commands.\n"
"    \n"
"    Runs COMMAND with ARGS suppressing  shell function lookup, or display\n"
"    information about the specified COMMANDs.  Can be used to invoke "
"commands\n"
"    on disk when a function with the same name exists.\n"
"    \n"
"    Options:\n"
"      -p\tuse a default value for PATH that is guaranteed to find all of\n"
"    \tthe standard utilities\n"
"      -v\tprint a description of COMMAND similar to the ‘type’ builtin\n"
"      -V\tprint a more verbose description of each COMMAND\n"
"    \n"
"    Exit Status:\n"
"    Returns exit status of COMMAND, or failure if COMMAND is not found."

#: builtins.c:476
msgid ""
"Set variable values and attributes.\n"
"    \n"
"    Declare variables and give them attributes.  If no NAMEs are given,\n"
"    display the attributes and values of all variables.\n"
"    \n"
"    Options:\n"
"      -f\trestrict action or display to function names and definitions\n"
"      -F\trestrict display to function names only (plus line number and\n"
"    \tsource file when debugging)\n"
"      -p\tdisplay the attributes and value of each NAME\n"
"    \n"
"    Options which set attributes:\n"
"      -a\tto make NAMEs indexed arrays (if supported)\n"
"      -A\tto make NAMEs associative arrays (if supported)\n"
"      -i\tto make NAMEs have the `integer' attribute\n"
"      -l\tto convert NAMEs to lower case on assignment\n"
"      -r\tto make NAMEs readonly\n"
"      -t\tto make NAMEs have the `trace' attribute\n"
"      -u\tto convert NAMEs to upper case on assignment\n"
"      -x\tto make NAMEs export\n"
"    \n"
"    Using `+' instead of `-' turns off the given attribute.\n"
"    \n"
"    Variables with the integer attribute have arithmetic evaluation (see\n"
"    the `let' command) performed when the variable is assigned a value.\n"
"    \n"
"    When used in a function, `declare' makes NAMEs local, as with the "
"`local'\n"
"    command.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."
msgstr ""
"Set variable values and attributes.\n"
"    \n"
"    Declare variables and give them attributes.  If no NAMEs are given,\n"
"    display the attributes and values of all variables.\n"
"    \n"
"    Options:\n"
"      -f\trestrict action or display to function names and definitions\n"
"      -F\trestrict display to function names only (plus line number and\n"
"    \tsource file when debugging)\n"
"      -p\tdisplay the attributes and value of each NAME\n"
"    \n"
"    Options which set attributes:\n"
"      -a\tto make NAMEs indexed arrays (if supported)\n"
"      -A\tto make NAMEs associative arrays (if supported)\n"
"      -i\tto make NAMEs have the ‘integer’ attribute\n"
"      -l\tto convert NAMEs to lower case on assignment\n"
"      -r\tto make NAMEs readonly\n"
"      -t\tto make NAMEs have the ‘trace’ attribute\n"
"      -u\tto convert NAMEs to upper case on assignment\n"
"      -x\tto make NAMEs export\n"
"    \n"
"    Using ‘+’ instead of ‘-’ turns off the given attribute.\n"
"    \n"
"    Variables with the integer attribute have arithmetic evaluation (see\n"
"    the ‘let’ command) performed when the variable is assigned a value.\n"
"    \n"
"    When used in a function, ‘declare’ makes NAMEs local, as with the "
"‘local’\n"
"    command.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."

#: builtins.c:512
msgid ""
"Set variable values and attributes.\n"
"    \n"
"    Obsolete.  See `help declare'."
msgstr ""
"Set variable values and attributes.\n"
"    \n"
"    Obsolete.  See ‘help declare’."

#: builtins.c:520
msgid ""
"Define local variables.\n"
"    \n"
"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
"    be any option accepted by `declare'.\n"
"    \n"
"    Local variables can only be used within a function; they are visible\n"
"    only to the function where they are defined and its children.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied, an error occurs,\n"
"    or the shell is not executing a function."
msgstr ""
"Define local variables.\n"
"    \n"
"    Create a local variable called NAME, and give it VALUE.  OPTION can\n"
"    be any option accepted by ‘declare’.\n"
"    \n"
"    Local variables can only be used within a function; they are visible\n"
"    only to the function where they are defined and its children.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied, an error occurs,\n"
"    or the shell is not executing a function."

#: builtins.c:537
msgid ""
"Write arguments to the standard output.\n"
"    \n"
"    Display the ARGs on the standard output followed by a newline.\n"
"    \n"
"    Options:\n"
"      -n\tdo not append a newline\n"
"      -e\tenable interpretation of the following backslash escapes\n"
"      -E\texplicitly suppress interpretation of backslash escapes\n"
"    \n"
"    `echo' interprets the following backslash-escaped characters:\n"
"      \\a\talert (bell)\n"
"      \\b\tbackspace\n"
"      \\c\tsuppress further output\n"
"      \\e\tescape character\n"
"      \\f\tform feed\n"
"      \\n\tnew line\n"
"      \\r\tcarriage return\n"
"      \\t\thorizontal tab\n"
"      \\v\tvertical tab\n"
"      \\\\\tbackslash\n"
"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
"    \t0 to 3 octal digits\n"
"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
"    \tcan be one or two hex digits\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless a write error occurs."
msgstr ""
"Write arguments to the standard output.\n"
"    \n"
"    Display the ARGs on the standard output followed by a newline.\n"
"    \n"
"    Options:\n"
"      -n\tdo not append a newline\n"
"      -e\tenable interpretation of the following backslash escapes\n"
"      -E\texplicitly suppress interpretation of backslash escapes\n"
"    \n"
"    ‘echo’ interprets the following backslash-escaped characters:\n"
"      \\a\talert (bell)\n"
"      \\b\tbackspace\n"
"      \\c\tsuppress further output\n"
"      \\e\tescape character\n"
"      \\f\tform feed\n"
"      \\n\tnew line\n"
"      \\r\tcarriage return\n"
"      \\t\thorizontal tab\n"
"      \\v\tvertical tab\n"
"      \\\\\tbackslash\n"
"      \\0nnn\tthe character whose ASCII code is NNN (octal).  NNN can be\n"
"    \t0 to 3 octal digits\n"
"      \\xHH\tthe eight-bit character whose value is HH (hexadecimal).  HH\n"
"    \tcan be one or two hex digits\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless a write error occurs."

#: builtins.c:571
msgid ""
"Write arguments to the standard output.\n"
"    \n"
"    Display the ARGs on the standard output followed by a newline.\n"
"    \n"
"    Options:\n"
"      -n\tdo not append a newline\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless a write error occurs."
msgstr ""
"Write arguments to the standard output.\n"
"    \n"
"    Display the ARGs on the standard output followed by a newline.\n"
"    \n"
"    Options:\n"
"      -n\tdo not append a newline\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless a write error occurs."

#: builtins.c:586
msgid ""
"Enable and disable shell builtins.\n"
"    \n"
"    Enables and disables builtin shell commands.  Disabling allows you to\n"
"    execute a disk command which has the same name as a shell builtin\n"
"    without using a full pathname.\n"
"    \n"
"    Options:\n"
"      -a\tprint a list of builtins showing whether or not each is enabled\n"
"      -n\tdisable each NAME or display a list of disabled builtins\n"
"      -p\tprint the list of builtins in a reusable format\n"
"      -s\tprint only the names of Posix `special' builtins\n"
"    \n"
"    Options controlling dynamic loading:\n"
"      -f\tLoad builtin NAME from shared object FILENAME\n"
"      -d\tRemove a builtin loaded with -f\n"
"    \n"
"    Without options, each NAME is enabled.\n"
"    \n"
"    To use the `test' found in $PATH instead of the shell builtin\n"
"    version, type `enable -n test'.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless NAME is not a shell builtin or an error occurs."
msgstr ""
"Enable and disable shell builtins.\n"
"    \n"
"    Enables and disables builtin shell commands.  Disabling allows you to\n"
"    execute a disk command which has the same name as a shell builtin\n"
"    without using a full pathname.\n"
"    \n"
"    Options:\n"
"      -a\tprint a list of builtins showing whether or not each is enabled\n"
"      -n\tdisable each NAME or display a list of disabled builtins\n"
"      -p\tprint the list of builtins in a reusable format\n"
"      -s\tprint only the names of Posix ‘special’ builtins\n"
"    \n"
"    Options controlling dynamic loading:\n"
"      -f\tLoad builtin NAME from shared object FILENAME\n"
"      -d\tRemove a builtin loaded with -f\n"
"    \n"
"    Without options, each NAME is enabled.\n"
"    \n"
"    To use the ‘test’ found in $PATH instead of the shell builtin\n"
"    version, type ‘enable -n test’.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless NAME is not a shell builtin or an error occurs."

#: builtins.c:614
msgid ""
"Execute arguments as a shell command.\n"
"    \n"
"    Combine ARGs into a single string, use the result as input to the "
"shell,\n"
"    and execute the resulting commands.\n"
"    \n"
"    Exit Status:\n"
"    Returns exit status of command or success if command is null."
msgstr ""
"Execute arguments as a shell command.\n"
"    \n"
"    Combine ARGs into a single string, use the result as input to the "
"shell,\n"
"    and execute the resulting commands.\n"
"    \n"
"    Exit Status:\n"
"    Returns exit status of command or success if command is null."

#: builtins.c:626
msgid ""
"Parse option arguments.\n"
"    \n"
"    Getopts is used by shell procedures to parse positional parameters\n"
"    as options.\n"
"    \n"
"    OPTSTRING contains the option letters to be recognized; if a letter\n"
"    is followed by a colon, the option is expected to have an argument,\n"
"    which should be separated from it by white space.\n"
"    \n"
"    Each time it is invoked, getopts will place the next option in the\n"
"    shell variable $name, initializing name if it does not exist, and\n"
"    the index of the next argument to be processed into the shell\n"
"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
"    a shell script is invoked.  When an option requires an argument,\n"
"    getopts places that argument into the shell variable OPTARG.\n"
"    \n"
"    getopts reports errors in one of two ways.  If the first character\n"
"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
"    this mode, no error messages are printed.  If an invalid option is\n"
"    seen, getopts places the option character found into OPTARG.  If a\n"
"    required argument is not found, getopts places a ':' into NAME and\n"
"    sets OPTARG to the option character found.  If getopts is not in\n"
"    silent mode, and an invalid option is seen, getopts places '?' into\n"
"    NAME and unsets OPTARG.  If a required argument is not found, a '?'\n"
"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
"    printed.\n"
"    \n"
"    If the shell variable OPTERR has the value 0, getopts disables the\n"
"    printing of error messages, even if the first character of\n"
"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
"    \n"
"    Getopts normally parses the positional parameters ($0 - $9), but if\n"
"    more arguments are given, they are parsed instead.\n"
"    \n"
"    Exit Status:\n"
"    Returns success if an option is found; fails if the end of options is\n"
"    encountered or an error occurs."
msgstr ""
"Parse option arguments.\n"
"    \n"
"    Getopts is used by shell procedures to parse positional parameters\n"
"    as options.\n"
"    \n"
"    OPTSTRING contains the option letters to be recognized; if a letter\n"
"    is followed by a colon, the option is expected to have an argument,\n"
"    which should be separated from it by white space.\n"
"    \n"
"    Each time it is invoked, getopts will place the next option in the\n"
"    shell variable $name, initializing name if it does not exist, and\n"
"    the index of the next argument to be processed into the shell\n"
"    variable OPTIND.  OPTIND is initialized to 1 each time the shell or\n"
"    a shell script is invoked.  When an option requires an argument,\n"
"    getopts places that argument into the shell variable OPTARG.\n"
"    \n"
"    getopts reports errors in one of two ways.  If the first character\n"
"    of OPTSTRING is a colon, getopts uses silent error reporting.  In\n"
"    this mode, no error messages are printed.  If an invalid option is\n"
"    seen, getopts places the option character found into OPTARG.  If a\n"
"    required argument is not found, getopts places a ‘:’ into NAME and\n"
"    sets OPTARG to the option character found.  If getopts is not in\n"
"    silent mode, and an invalid option is seen, getopts places ‘?’ into\n"
"    NAME and unsets OPTARG.  If a required argument is not found, a ‘?’\n"
"    is placed in NAME, OPTARG is unset, and a diagnostic message is\n"
"    printed.\n"
"    \n"
"    If the shell variable OPTERR has the value 0, getopts disables the\n"
"    printing of error messages, even if the first character of\n"
"    OPTSTRING is not a colon.  OPTERR has the value 1 by default.\n"
"    \n"
"    Getopts normally parses the positional parameters ($0 - $9), but if\n"
"    more arguments are given, they are parsed instead.\n"
"    \n"
"    Exit Status:\n"
"    Returns success if an option is found; fails if the end of options is\n"
"    encountered or an error occurs."

#: builtins.c:668
msgid ""
"Replace the shell with the given command.\n"
"    \n"
"    Execute COMMAND, replacing this shell with the specified program.\n"
"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
"specified,\n"
"    any redirections take effect in the current shell.\n"
"    \n"
"    Options:\n"
"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
"      -c\t\texecute COMMAND with an empty environment\n"
"      -l\t\tplace a dash in the zeroth argument to COMMAND\n"
"    \n"
"    If the command cannot be executed, a non-interactive shell exits, "
"unless\n"
"    the shell option `execfail' is set.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless COMMAND is not found or a redirection error "
"occurs."
msgstr ""
"Replace the shell with the given command.\n"
"    \n"
"    Execute COMMAND, replacing this shell with the specified program.\n"
"    ARGUMENTS become the arguments to COMMAND.  If COMMAND is not "
"specified,\n"
"    any redirections take effect in the current shell.\n"
"    \n"
"    Options:\n"
"      -a name\tpass NAME as the zeroth argument to COMMAND\n"
"      -c\t\texecute COMMAND with an empty environment\n"
"      -l\t\tplace a dash in the zeroth argument to COMMAND\n"
"    \n"
"    If the command cannot be executed, a non-interactive shell exits, "
"unless\n"
"    the shell option ‘execfail’ is set.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless COMMAND is not found or a redirection error "
"occurs."

#: builtins.c:689
msgid ""
"Exit the shell.\n"
"    \n"
"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
"    is that of the last command executed."
msgstr ""
"Exit the shell.\n"
"    \n"
"    Exits the shell with a status of N.  If N is omitted, the exit status\n"
"    is that of the last command executed."

#: builtins.c:698
msgid ""
"Exit a login shell.\n"
"    \n"
"    Exits a login shell with exit status N.  Returns an error if not "
"executed\n"
"    in a login shell."
msgstr ""
"Exit a login shell.\n"
"    \n"
"    Exits a login shell with exit status N.  Returns an error if not "
"executed\n"
"    in a login shell."

#: builtins.c:708
msgid ""
"Display or execute commands from the history list.\n"
"    \n"
"    fc is used to list or edit and re-execute commands from the history "
"list.\n"
"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
"    string, which means the most recent command beginning with that\n"
"    string.\n"
"    \n"
"    Options:\n"
"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
"EDITOR,\n"
"    \t\tthen vi\n"
"      -l \tlist lines instead of editing\n"
"      -n\tomit line numbers when listing\n"
"      -r\treverse the order of the lines (newest listed first)\n"
"    \n"
"    With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n"
"    re-executed after the substitution OLD=NEW is performed.\n"
"    \n"
"    A useful alias to use with this is r='fc -s', so that typing `r cc'\n"
"    runs the last command beginning with `cc' and typing `r' re-executes\n"
"    the last command.\n"
"    \n"
"    Exit Status:\n"
"    Returns success or status of executed command; non-zero if an error "
"occurs."
msgstr ""
"Display or execute commands from the history list.\n"
"    \n"
"    fc is used to list or edit and re-execute commands from the history "
"list.\n"
"    FIRST and LAST can be numbers specifying the range, or FIRST can be a\n"
"    string, which means the most recent command beginning with that\n"
"    string.\n"
"    \n"
"    Options:\n"
"      -e ENAME\tselect which editor to use.  Default is FCEDIT, then "
"EDITOR,\n"
"    \t\tthen vi\n"
"      -l \tlist lines instead of editing\n"
"      -n\tomit line numbers when listing\n"
"      -r\treverse the order of the lines (newest listed first)\n"
"    \n"
"    With the ‘fc -s [pat=rep ...] [command]’ format, COMMAND is\n"
"    re-executed after the substitution OLD=NEW is performed.\n"
"    \n"
"    A useful alias to use with this is r='fc -s', so that typing ‘r cc’\n"
"    runs the last command beginning with ‘cc’ and typing ‘r’ re-executes\n"
"    the last command.\n"
"    \n"
"    Exit Status:\n"
"    Returns success or status of executed command; non-zero if an error "
"occurs."

#: builtins.c:738
msgid ""
"Move job to the foreground.\n"
"    \n"
"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
"    current job is used.\n"
"    \n"
"    Exit Status:\n"
"    Status of command placed in foreground, or failure if an error occurs."
msgstr ""
"Move job to the foreground.\n"
"    \n"
"    Place the job identified by JOB_SPEC in the foreground, making it the\n"
"    current job.  If JOB_SPEC is not present, the shell's notion of the\n"
"    current job is used.\n"
"    \n"
"    Exit Status:\n"
"    Status of command placed in foreground, or failure if an error occurs."

#: builtins.c:753
msgid ""
"Move jobs to the background.\n"
"    \n"
"    Place the jobs identified by each JOB_SPEC in the background, as if "
"they\n"
"    had been started with `&'.  If JOB_SPEC is not present, the shell's "
"notion\n"
"    of the current job is used.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless job control is not enabled or an error occurs."
msgstr ""
"Move jobs to the background.\n"
"    \n"
"    Place the jobs identified by each JOB_SPEC in the background, as if "
"they\n"
"    had been started with ‘&’.  If JOB_SPEC is not present, the shell's "
"notion\n"
"    of the current job is used.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless job control is not enabled or an error occurs."

#: builtins.c:767
msgid ""
"Remember or display program locations.\n"
"    \n"
"    Determine and remember the full pathname of each command NAME.  If\n"
"    no arguments are given, information about remembered commands is "
"displayed.\n"
"    \n"
"    Options:\n"
"      -d\t\tforget the remembered location of each NAME\n"
"      -l\t\tdisplay in a format that may be reused as input\n"
"      -p pathname\tuse PATHNAME is the full pathname of NAME\n"
"      -r\t\tforget all remembered locations\n"
"      -t\t\tprint the remembered location of each NAME, preceding\n"
"    \t\teach location with the corresponding NAME if multiple\n"
"    \t\tNAMEs are given\n"
"    Arguments:\n"
"      NAME\t\tEach NAME is searched for in $PATH and added to the list\n"
"    \t\tof remembered commands.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless NAME is not found or an invalid option is given."
msgstr ""
"Remember or display program locations.\n"
"    \n"
"    Determine and remember the full pathname of each command NAME.  If\n"
"    no arguments are given, information about remembered commands is "
"displayed.\n"
"    \n"
"    Options:\n"
"      -d\t\tforget the remembered location of each NAME\n"
"      -l\t\tdisplay in a format that may be reused as input\n"
"      -p pathname\tuse PATHNAME is the full pathname of NAME\n"
"      -r\t\tforget all remembered locations\n"
"      -t\t\tprint the remembered location of each NAME, preceding\n"
"    \t\teach location with the corresponding NAME if multiple\n"
"    \t\tNAMEs are given\n"
"    Arguments:\n"
"      NAME\t\tEach NAME is searched for in $PATH and added to the list\n"
"    \t\tof remembered commands.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless NAME is not found or an invalid option is given."

#: builtins.c:792
msgid ""
"Display information about builtin commands.\n"
"    \n"
"    Displays brief summaries of builtin commands.  If PATTERN is\n"
"    specified, gives detailed help on all commands matching PATTERN,\n"
"    otherwise the list of help topics is printed.\n"
"    \n"
"    Options:\n"
"      -d\toutput short description for each topic\n"
"      -m\tdisplay usage in pseudo-manpage format\n"
"      -s\toutput only a short usage synopsis for each topic matching\n"
"    \tPATTERN\n"
"    \n"
"    Arguments:\n"
"      PATTERN\tPattern specifiying a help topic\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless PATTERN is not found or an invalid option is "
"given."
msgstr ""
"Display information about builtin commands.\n"
"    \n"
"    Displays brief summaries of builtin commands.  If PATTERN is\n"
"    specified, gives detailed help on all commands matching PATTERN,\n"
"    otherwise the list of help topics is printed.\n"
"    \n"
"    Options:\n"
"      -d\toutput short description for each topic\n"
"      -m\tdisplay usage in pseudo-manpage format\n"
"      -s\toutput only a short usage synopsis for each topic matching\n"
"    \tPATTERN\n"
"    \n"
"    Arguments:\n"
"      PATTERN\tPattern specifiying a help topic\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless PATTERN is not found or an invalid option is "
"given."

#: builtins.c:816
msgid ""
"Display or manipulate the history list.\n"
"    \n"
"    Display the history list with line numbers, prefixing each modified\n"
"    entry with a `*'.  An argument of N lists only the last N entries.\n"
"    \n"
"    Options:\n"
"      -c\tclear the history list by deleting all of the entries\n"
"      -d offset\tdelete the history entry at offset OFFSET.\n"
"    \n"
"      -a\tappend history lines from this session to the history file\n"
"      -n\tread all history lines not already read from the history file\n"
"      -r\tread the history file and append the contents to the history\n"
"    \tlist\n"
"      -w\twrite the current history to the history file\n"
"    \tand append them to the history list\n"
"    \n"
"      -p\tperform history expansion on each ARG and display the result\n"
"    \twithout storing it in the history list\n"
"      -s\tappend the ARGs to the history list as a single entry\n"
"    \n"
"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
"    if $HISTFILE has a value, that is used, else ~/.bash_history.\n"
"    \n"
"    If the $HISTTIMEFORMAT variable is set and not null, its value is used\n"
"    as a format string for strftime(3) to print the time stamp associated\n"
"    with each displayed history entry.  No time stamps are printed "
"otherwise.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or an error occurs."
msgstr ""
"Display or manipulate the history list.\n"
"    \n"
"    Display the history list with line numbers, prefixing each modified\n"
"    entry with a ‘*’.  An argument of N lists only the last N entries.\n"
"    \n"
"    Options:\n"
"      -c\tclear the history list by deleting all of the entries\n"
"      -d offset\tdelete the history entry at offset OFFSET.\n"
"    \n"
"      -a\tappend history lines from this session to the history file\n"
"      -n\tread all history lines not already read from the history file\n"
"      -r\tread the history file and append the contents to the history\n"
"    \tlist\n"
"      -w\twrite the current history to the history file\n"
"    \tand append them to the history list\n"
"    \n"
"      -p\tperform history expansion on each ARG and display the result\n"
"    \twithout storing it in the history list\n"
"      -s\tappend the ARGs to the history list as a single entry\n"
"    \n"
"    If FILENAME is given, it is used as the history file.  Otherwise,\n"
"    if $HISTFILE has a value, that is used, else ~/.bash_history.\n"
"    \n"
"    If the $HISTTIMEFORMAT variable is set and not null, its value is used\n"
"    as a format string for strftime(3) to print the time stamp associated\n"
"    with each displayed history entry.  No time stamps are printed "
"otherwise.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or an error occurs."

#: builtins.c:852
msgid ""
"Display status of jobs.\n"
"    \n"
"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
"    Without options, the status of all active jobs is displayed.\n"
"    \n"
"    Options:\n"
"      -l\tlists process IDs in addition to the normal information\n"
"      -n\tlist only processes that have changed status since the last\n"
"    \tnotification\n"
"      -p\tlists process IDs only\n"
"      -r\trestrict output to running jobs\n"
"      -s\trestrict output to stopped jobs\n"
"    \n"
"    If -x is supplied, COMMAND is run after all job specifications that\n"
"    appear in ARGS have been replaced with the process ID of that job's\n"
"    process group leader.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or an error occurs.\n"
"    If -x is used, returns the exit status of COMMAND."
msgstr ""
"Display status of jobs.\n"
"    \n"
"    Lists the active jobs.  JOBSPEC restricts output to that job.\n"
"    Without options, the status of all active jobs is displayed.\n"
"    \n"
"    Options:\n"
"      -l\tlists process IDs in addition to the normal information\n"
"      -n\tlist only processes that have changed status since the last\n"
"    \tnotification\n"
"      -p\tlists process IDs only\n"
"      -r\trestrict output to running jobs\n"
"      -s\trestrict output to stopped jobs\n"
"    \n"
"    If -x is supplied, COMMAND is run after all job specifications that\n"
"    appear in ARGS have been replaced with the process ID of that job's\n"
"    process group leader.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or an error occurs.\n"
"    If -x is used, returns the exit status of COMMAND."

#: builtins.c:879
msgid ""
"Remove jobs from current shell.\n"
"    \n"
"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
"    any JOBSPECs, the shell uses its notion of the current job.\n"
"    \n"
"    Options:\n"
"      -a\tremove all jobs if JOBSPEC is not supplied\n"
"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
"    \tshell receives a SIGHUP\n"
"      -r\tremove only running jobs\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option or JOBSPEC is given."
msgstr ""
"Remove jobs from current shell.\n"
"    \n"
"    Removes each JOBSPEC argument from the table of active jobs.  Without\n"
"    any JOBSPECs, the shell uses its notion of the current job.\n"
"    \n"
"    Options:\n"
"      -a\tremove all jobs if JOBSPEC is not supplied\n"
"      -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n"
"    \tshell receives a SIGHUP\n"
"      -r\tremove only running jobs\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option or JOBSPEC is given."

#: builtins.c:898
msgid ""
"Send a signal to a job.\n"
"    \n"
"    Send the processes identified by PID or JOBSPEC the signal named by\n"
"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
"    SIGTERM is assumed.\n"
"    \n"
"    Options:\n"
"      -s sig\tSIG is a signal name\n"
"      -n sig\tSIG is a signal number\n"
"      -l\tlist the signal names; if arguments follow `-l' they are\n"
"    \tassumed to be signal numbers for which names should be listed\n"
"    \n"
"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
"    instead of process IDs, and allows processes to be killed if the limit\n"
"    on processes that you can create is reached.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or an error occurs."
msgstr ""
"Send a signal to a job.\n"
"    \n"
"    Send the processes identified by PID or JOBSPEC the signal named by\n"
"    SIGSPEC or SIGNUM.  If neither SIGSPEC nor SIGNUM is present, then\n"
"    SIGTERM is assumed.\n"
"    \n"
"    Options:\n"
"      -s sig\tSIG is a signal name\n"
"      -n sig\tSIG is a signal number\n"
"      -l\tlist the signal names; if arguments follow ‘-l’ they are\n"
"    \tassumed to be signal numbers for which names should be listed\n"
"    \n"
"    Kill is a shell builtin for two reasons: it allows job IDs to be used\n"
"    instead of process IDs, and allows processes to be killed if the limit\n"
"    on processes that you can create is reached.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or an error occurs."

#: builtins.c:921
msgid ""
"Evaluate arithmetic expressions.\n"
"    \n"
"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
"    fixed-width integers with no check for overflow, though division by 0\n"
"    is trapped and flagged as an error.  The following list of operators is\n"
"    grouped into levels of equal-precedence operators.  The levels are "
"listed\n"
"    in order of decreasing precedence.\n"
"    \n"
"    \tid++, id--\tvariable post-increment, post-decrement\n"
"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
"    \t-, +\t\tunary minus, plus\n"
"    \t!, ~\t\tlogical and bitwise negation\n"
"    \t**\t\texponentiation\n"
"    \t*, /, %\t\tmultiplication, division, remainder\n"
"    \t+, -\t\taddition, subtraction\n"
"    \t<<, >>\t\tleft and right bitwise shifts\n"
"    \t<=, >=, <, >\tcomparison\n"
"    \t==, !=\t\tequality, inequality\n"
"    \t&\t\tbitwise AND\n"
"    \t^\t\tbitwise XOR\n"
"    \t|\t\tbitwise OR\n"
"    \t&&\t\tlogical AND\n"
"    \t||\t\tlogical OR\n"
"    \texpr ? expr : expr\n"
"    \t\t\tconditional operator\n"
"    \t=, *=, /=, %=,\n"
"    \t+=, -=, <<=, >>=,\n"
"    \t&=, ^=, |=\tassignment\n"
"    \n"
"    Shell variables are allowed as operands.  The name of the variable\n"
"    is replaced by its value (coerced to a fixed-width integer) within\n"
"    an expression.  The variable need not have its integer attribute\n"
"    turned on to be used in an expression.\n"
"    \n"
"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
"    parentheses are evaluated first and may override the precedence\n"
"    rules above.\n"
"    \n"
"    Exit Status:\n"
"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise.."
msgstr ""
"Evaluate arithmetic expressions.\n"
"    \n"
"    Evaluate each ARG as an arithmetic expression.  Evaluation is done in\n"
"    fixed-width integers with no check for overflow, though division by 0\n"
"    is trapped and flagged as an error.  The following list of operators is\n"
"    grouped into levels of equal-precedence operators.  The levels are "
"listed\n"
"    in order of decreasing precedence.\n"
"    \n"
"    \tid++, id--\tvariable post-increment, post-decrement\n"
"    \t++id, --id\tvariable pre-increment, pre-decrement\n"
"    \t-, +\t\tunary minus, plus\n"
"    \t!, ~\t\tlogical and bitwise negation\n"
"    \t**\t\texponentiation\n"
"    \t*, /, %\t\tmultiplication, division, remainder\n"
"    \t+, -\t\taddition, subtraction\n"
"    \t<<, >>\t\tleft and right bitwise shifts\n"
"    \t<=, >=, <, >\tcomparison\n"
"    \t==, !=\t\tequality, inequality\n"
"    \t&\t\tbitwise AND\n"
"    \t^\t\tbitwise XOR\n"
"    \t|\t\tbitwise OR\n"
"    \t&&\t\tlogical AND\n"
"    \t||\t\tlogical OR\n"
"    \texpr ? expr : expr\n"
"    \t\t\tconditional operator\n"
"    \t=, *=, /=, %=,\n"
"    \t+=, -=, <<=, >>=,\n"
"    \t&=, ^=, |=\tassignment\n"
"    \n"
"    Shell variables are allowed as operands.  The name of the variable\n"
"    is replaced by its value (coerced to a fixed-width integer) within\n"
"    an expression.  The variable need not have its integer attribute\n"
"    turned on to be used in an expression.\n"
"    \n"
"    Operators are evaluated in order of precedence.  Sub-expressions in\n"
"    parentheses are evaluated first and may override the precedence\n"
"    rules above.\n"
"    \n"
"    Exit Status:\n"
"    If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise.."

#: builtins.c:966
msgid ""
"Read a line from the standard input and split it into fields.\n"
"    \n"
"    Reads a single line from the standard input, or from file descriptor FD\n"
"    if the -u option is supplied.  The line is split into fields as with "
"word\n"
"    splitting, and the first word is assigned to the first NAME, the second\n"
"    word to the second NAME, and so on, with any leftover words assigned to\n"
"    the last NAME.  Only the characters found in $IFS are recognized as "
"word\n"
"    delimiters.\n"
"    \n"
"    If no NAMEs are supplied, the line read is stored in the REPLY "
"variable.\n"
"    \n"
"    Options:\n"
"      -a array\tassign the words read to sequential indices of the array\n"
"    \t\tvariable ARRAY, starting at zero\n"
"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
"    \t\tthan newline\n"
"      -e\t\tuse Readline to obtain the line in an interactive shell\n"
"      -i text\tUse TEXT as the initial text for Readline\n"
"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
"    \t\tfor a newline, but honor a delimiter if fewer than NCHARS\n"
"    \t\tcharacters are read before the delimiter\n"
"      -N nchars\treturn only after reading exactly NCHARS characters, "
"unless\n"
"    \t\tEOF is encountered or read times out, ignoring any delimiter\n"
"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
"    \t\tattempting to read\n"
"      -r\t\tdo not allow backslashes to escape any characters\n"
"      -s\t\tdo not echo input coming from a terminal\n"
"      -t timeout\ttime out and return failure if a complete line of input "
"is\n"
"    \t\tnot read withint TIMEOUT seconds.  The value of the TMOUT\n"
"    \t\tvariable is the default timeout.  TIMEOUT may be a\n"
"    \t\tfractional number.  If TIMEOUT is 0, read returns success only\n"
"    \t\tif input is available on the specified file descriptor.  The\n"
"    \t\texit status is greater than 128 if the timeout is exceeded\n"
"      -u fd\t\tread from file descriptor FD instead of the standard input\n"
"    \n"
"    Exit Status:\n"
"    The return code is zero, unless end-of-file is encountered, read times "
"out,\n"
"    or an invalid file descriptor is supplied as the argument to -u."
msgstr ""
"Read a line from the standard input and split it into fields.\n"
"    \n"
"    Reads a single line from the standard input, or from file descriptor FD\n"
"    if the -u option is supplied.  The line is split into fields as with "
"word\n"
"    splitting, and the first word is assigned to the first NAME, the second\n"
"    word to the second NAME, and so on, with any leftover words assigned to\n"
"    the last NAME.  Only the characters found in $IFS are recognized as "
"word\n"
"    delimiters.\n"
"    \n"
"    If no NAMEs are supplied, the line read is stored in the REPLY "
"variable.\n"
"    \n"
"    Options:\n"
"      -a array\tassign the words read to sequential indices of the array\n"
"    \t\tvariable ARRAY, starting at zero\n"
"      -d delim\tcontinue until the first character of DELIM is read, rather\n"
"    \t\tthan newline\n"
"      -e\t\tuse Readline to obtain the line in an interactive shell\n"
"      -i text\tUse TEXT as the initial text for Readline\n"
"      -n nchars\treturn after reading NCHARS characters rather than waiting\n"
"    \t\tfor a newline, but honor a delimiter if fewer than NCHARS\n"
"    \t\tcharacters are read before the delimiter\n"
"      -N nchars\treturn only after reading exactly NCHARS characters, "
"unless\n"
"    \t\tEOF is encountered or read times out, ignoring any delimiter\n"
"      -p prompt\toutput the string PROMPT without a trailing newline before\n"
"    \t\tattempting to read\n"
"      -r\t\tdo not allow backslashes to escape any characters\n"
"      -s\t\tdo not echo input coming from a terminal\n"
"      -t timeout\ttime out and return failure if a complete line of input "
"is\n"
"    \t\tnot read withint TIMEOUT seconds.  The value of the TMOUT\n"
"    \t\tvariable is the default timeout.  TIMEOUT may be a\n"
"    \t\tfractional number.  If TIMEOUT is 0, read returns success only\n"
"    \t\tif input is available on the specified file descriptor.  The\n"
"    \t\texit status is greater than 128 if the timeout is exceeded\n"
"      -u fd\t\tread from file descriptor FD instead of the standard input\n"
"    \n"
"    Exit Status:\n"
"    The return code is zero, unless end-of-file is encountered, read times "
"out,\n"
"    or an invalid file descriptor is supplied as the argument to -u."

#: builtins.c:1009
msgid ""
"Return from a shell function.\n"
"    \n"
"    Causes a function or sourced script to exit with the return value\n"
"    specified by N.  If N is omitted, the return status is that of the\n"
"    last command executed within the function or script.\n"
"    \n"
"    Exit Status:\n"
"    Returns N, or failure if the shell is not executing a function or script."
msgstr ""
"Return from a shell function.\n"
"    \n"
"    Causes a function or sourced script to exit with the return value\n"
"    specified by N.  If N is omitted, the return status is that of the\n"
"    last command executed within the function or script.\n"
"    \n"
"    Exit Status:\n"
"    Returns N, or failure if the shell is not executing a function or script."

#: builtins.c:1022
msgid ""
"Set or unset values of shell options and positional parameters.\n"
"    \n"
"    Change the value of shell attributes and positional parameters, or\n"
"    display the names and values of shell variables.\n"
"    \n"
"    Options:\n"
"      -a  Mark variables which are modified or created for export.\n"
"      -b  Notify of job termination immediately.\n"
"      -e  Exit immediately if a command exits with a non-zero status.\n"
"      -f  Disable file name generation (globbing).\n"
"      -h  Remember the location of commands as they are looked up.\n"
"      -k  All assignment arguments are placed in the environment for a\n"
"          command, not just those that precede the command name.\n"
"      -m  Job control is enabled.\n"
"      -n  Read commands but do not execute them.\n"
"      -o option-name\n"
"          Set the variable corresponding to option-name:\n"
"              allexport    same as -a\n"
"              braceexpand  same as -B\n"
"              emacs        use an emacs-style line editing interface\n"
"              errexit      same as -e\n"
"              errtrace     same as -E\n"
"              functrace    same as -T\n"
"              hashall      same as -h\n"
"              histexpand   same as -H\n"
"              history      enable command history\n"
"              ignoreeof    the shell will not exit upon reading EOF\n"
"              interactive-comments\n"
"                           allow comments to appear in interactive commands\n"
"              keyword      same as -k\n"
"              monitor      same as -m\n"
"              noclobber    same as -C\n"
"              noexec       same as -n\n"
"              noglob       same as -f\n"
"              nolog        currently accepted but ignored\n"
"              notify       same as -b\n"
"              nounset      same as -u\n"
"              onecmd       same as -t\n"
"              physical     same as -P\n"
"              pipefail     the return value of a pipeline is the status of\n"
"                           the last command to exit with a non-zero status,\n"
"                           or zero if no command exited with a non-zero "
"status\n"
"              posix        change the behavior of bash where the default\n"
"                           operation differs from the Posix standard to\n"
"                           match the standard\n"
"              privileged   same as -p\n"
"              verbose      same as -v\n"
"              vi           use a vi-style line editing interface\n"
"              xtrace       same as -x\n"
"      -p  Turned on whenever the real and effective user ids do not match.\n"
"          Disables processing of the $ENV file and importing of shell\n"
"          functions.  Turning this option off causes the effective uid and\n"
"          gid to be set to the real uid and gid.\n"
"      -t  Exit after reading and executing one command.\n"
"      -u  Treat unset variables as an error when substituting.\n"
"      -v  Print shell input lines as they are read.\n"
"      -x  Print commands and their arguments as they are executed.\n"
"      -B  the shell will perform brace expansion\n"
"      -C  If set, disallow existing regular files to be overwritten\n"
"          by redirection of output.\n"
"      -E  If set, the ERR trap is inherited by shell functions.\n"
"      -H  Enable ! style history substitution.  This flag is on\n"
"          by default when the shell is interactive.\n"
"      -P  If set, do not follow symbolic links when executing commands\n"
"          such as cd which change the current directory.\n"
"      -T  If set, the DEBUG trap is inherited by shell functions.\n"
"      -   Assign any remaining arguments to the positional parameters.\n"
"          The -x and -v options are turned off.\n"
"    \n"
"    Using + rather than - causes these flags to be turned off.  The\n"
"    flags can also be used upon invocation of the shell.  The current\n"
"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
"    ARGs are given, all shell variables are printed.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given."
msgstr ""
"Set or unset values of shell options and positional parameters.\n"
"    \n"
"    Change the value of shell attributes and positional parameters, or\n"
"    display the names and values of shell variables.\n"
"    \n"
"    Options:\n"
"      -a  Mark variables which are modified or created for export.\n"
"      -b  Notify of job termination immediately.\n"
"      -e  Exit immediately if a command exits with a non-zero status.\n"
"      -f  Disable file name generation (globbing).\n"
"      -h  Remember the location of commands as they are looked up.\n"
"      -k  All assignment arguments are placed in the environment for a\n"
"          command, not just those that precede the command name.\n"
"      -m  Job control is enabled.\n"
"      -n  Read commands but do not execute them.\n"
"      -o option-name\n"
"          Set the variable corresponding to option-name:\n"
"              allexport    same as -a\n"
"              braceexpand  same as -B\n"
"              emacs        use an emacs-style line editing interface\n"
"              errexit      same as -e\n"
"              errtrace     same as -E\n"
"              functrace    same as -T\n"
"              hashall      same as -h\n"
"              histexpand   same as -H\n"
"              history      enable command history\n"
"              ignoreeof    the shell will not exit upon reading EOF\n"
"              interactive-comments\n"
"                           allow comments to appear in interactive commands\n"
"              keyword      same as -k\n"
"              monitor      same as -m\n"
"              noclobber    same as -C\n"
"              noexec       same as -n\n"
"              noglob       same as -f\n"
"              nolog        currently accepted but ignored\n"
"              notify       same as -b\n"
"              nounset      same as -u\n"
"              onecmd       same as -t\n"
"              physical     same as -P\n"
"              pipefail     the return value of a pipeline is the status of\n"
"                           the last command to exit with a non-zero status,\n"
"                           or zero if no command exited with a non-zero "
"status\n"
"              posix        change the behavior of bash where the default\n"
"                           operation differs from the Posix standard to\n"
"                           match the standard\n"
"              privileged   same as -p\n"
"              verbose      same as -v\n"
"              vi           use a vi-style line editing interface\n"
"              xtrace       same as -x\n"
"      -p  Turned on whenever the real and effective user ids do not match.\n"
"          Disables processing of the $ENV file and importing of shell\n"
"          functions.  Turning this option off causes the effective uid and\n"
"          gid to be set to the real uid and gid.\n"
"      -t  Exit after reading and executing one command.\n"
"      -u  Treat unset variables as an error when substituting.\n"
"      -v  Print shell input lines as they are read.\n"
"      -x  Print commands and their arguments as they are executed.\n"
"      -B  the shell will perform brace expansion\n"
"      -C  If set, disallow existing regular files to be overwritten\n"
"          by redirection of output.\n"
"      -E  If set, the ERR trap is inherited by shell functions.\n"
"      -H  Enable ! style history substitution.  This flag is on\n"
"          by default when the shell is interactive.\n"
"      -P  If set, do not follow symbolic links when executing commands\n"
"          such as cd which change the current directory.\n"
"      -T  If set, the DEBUG trap is inherited by shell functions.\n"
"      -   Assign any remaining arguments to the positional parameters.\n"
"          The -x and -v options are turned off.\n"
"    \n"
"    Using + rather than - causes these flags to be turned off.  The\n"
"    flags can also be used upon invocation of the shell.  The current\n"
"    set of flags may be found in $-.  The remaining n ARGs are positional\n"
"    parameters and are assigned, in order, to $1, $2, .. $n.  If no\n"
"    ARGs are given, all shell variables are printed.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given."

#: builtins.c:1104
msgid ""
"Unset values and attributes of shell variables and functions.\n"
"    \n"
"    For each NAME, remove the corresponding variable or function.\n"
"    \n"
"    Options:\n"
"      -f\ttreat each NAME as a shell function\n"
"      -v\ttreat each NAME as a shell variable\n"
"    \n"
"    Without options, unset first tries to unset a variable, and if that "
"fails,\n"
"    tries to unset a function.\n"
"    \n"
"    Some variables cannot be unset; also see `readonly'.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or a NAME is read-only."
msgstr ""
"Unset values and attributes of shell variables and functions.\n"
"    \n"
"    For each NAME, remove the corresponding variable or function.\n"
"    \n"
"    Options:\n"
"      -f\ttreat each NAME as a shell function\n"
"      -v\ttreat each NAME as a shell variable\n"
"    \n"
"    Without options, unset first tries to unset a variable, and if that "
"fails,\n"
"    tries to unset a function.\n"
"    \n"
"    Some variables cannot be unset; also see ‘readonly’.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or a NAME is read-only."

#: builtins.c:1124
msgid ""
"Set export attribute for shell variables.\n"
"    \n"
"    Marks each NAME for automatic export to the environment of subsequently\n"
"    executed commands.  If VALUE is supplied, assign VALUE before "
"exporting.\n"
"    \n"
"    Options:\n"
"      -f\trefer to shell functions\n"
"      -n\tremove the export property from each NAME\n"
"      -p\tdisplay a list of all exported variables and functions\n"
"    \n"
"    An argument of `--' disables further option processing.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or NAME is invalid."
msgstr ""
"Set export attribute for shell variables.\n"
"    \n"
"    Marks each NAME for automatic export to the environment of subsequently\n"
"    executed commands.  If VALUE is supplied, assign VALUE before "
"exporting.\n"
"    \n"
"    Options:\n"
"      -f\trefer to shell functions\n"
"      -n\tremove the export property from each NAME\n"
"      -p\tdisplay a list of all exported variables and functions\n"
"    \n"
"    An argument of ‘--’ disables further option processing.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or NAME is invalid."

#: builtins.c:1143
msgid ""
"Mark shell variables as unchangeable.\n"
"    \n"
"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
"    before marking as read-only.\n"
"    \n"
"    Options:\n"
"      -a\trefer to indexed array variables\n"
"      -A\trefer to associative array variables\n"
"      -f\trefer to shell functions\n"
"      -p\tdisplay a list of all readonly variables and functions\n"
"    \n"
"    An argument of `--' disables further option processing.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or NAME is invalid."
msgstr ""
"Mark shell variables as unchangeable.\n"
"    \n"
"    Mark each NAME as read-only; the values of these NAMEs may not be\n"
"    changed by subsequent assignment.  If VALUE is supplied, assign VALUE\n"
"    before marking as read-only.\n"
"    \n"
"    Options:\n"
"      -a\trefer to indexed array variables\n"
"      -A\trefer to associative array variables\n"
"      -f\trefer to shell functions\n"
"      -p\tdisplay a list of all readonly variables and functions\n"
"    \n"
"    An argument of ‘--’ disables further option processing.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or NAME is invalid."

#: builtins.c:1164
msgid ""
"Shift positional parameters.\n"
"    \n"
"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
"    not given, it is assumed to be 1.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless N is negative or greater than $#."
msgstr ""
"Shift positional parameters.\n"
"    \n"
"    Rename the positional parameters $N+1,$N+2 ... to $1,$2 ...  If N is\n"
"    not given, it is assumed to be 1.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless N is negative or greater than $#."

#: builtins.c:1176 builtins.c:1191
msgid ""
"Execute commands from a file in the current shell.\n"
"    \n"
"    Read and execute commands from FILENAME in the current shell.  The\n"
"    entries in $PATH are used to find the directory containing FILENAME.\n"
"    If any ARGUMENTS are supplied, they become the positional parameters\n"
"    when FILENAME is executed.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed in FILENAME; fails if\n"
"    FILENAME cannot be read."
msgstr ""
"Execute commands from a file in the current shell.\n"
"    \n"
"    Read and execute commands from FILENAME in the current shell.  The\n"
"    entries in $PATH are used to find the directory containing FILENAME.\n"
"    If any ARGUMENTS are supplied, they become the positional parameters\n"
"    when FILENAME is executed.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed in FILENAME; fails if\n"
"    FILENAME cannot be read."

#: builtins.c:1207
msgid ""
"Suspend shell execution.\n"
"    \n"
"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
"    Unless forced, login shells cannot be suspended.\n"
"    \n"
"    Options:\n"
"      -f\tforce the suspend, even if the shell is a login shell\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless job control is not enabled or an error occurs."
msgstr ""
"Suspend shell execution.\n"
"    \n"
"    Suspend the execution of this shell until it receives a SIGCONT signal.\n"
"    Unless forced, login shells cannot be suspended.\n"
"    \n"
"    Options:\n"
"      -f\tforce the suspend, even if the shell is a login shell\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless job control is not enabled or an error occurs."

#: builtins.c:1223
msgid ""
"Evaluate conditional expression.\n"
"    \n"
"    Exits with a status of 0 (true) or 1 (false) depending on\n"
"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
"    expressions are often used to examine the status of a file.  There\n"
"    are string operators as well, and numeric comparison operators.\n"
"    \n"
"    File operators:\n"
"    \n"
"      -a FILE        True if file exists.\n"
"      -b FILE        True if file is block special.\n"
"      -c FILE        True if file is character special.\n"
"      -d FILE        True if file is a directory.\n"
"      -e FILE        True if file exists.\n"
"      -f FILE        True if file exists and is a regular file.\n"
"      -g FILE        True if file is set-group-id.\n"
"      -h FILE        True if file is a symbolic link.\n"
"      -L FILE        True if file is a symbolic link.\n"
"      -k FILE        True if file has its `sticky' bit set.\n"
"      -p FILE        True if file is a named pipe.\n"
"      -r FILE        True if file is readable by you.\n"
"      -s FILE        True if file exists and is not empty.\n"
"      -S FILE        True if file is a socket.\n"
"      -t FD          True if FD is opened on a terminal.\n"
"      -u FILE        True if the file is set-user-id.\n"
"      -w FILE        True if the file is writable by you.\n"
"      -x FILE        True if the file is executable by you.\n"
"      -O FILE        True if the file is effectively owned by you.\n"
"      -G FILE        True if the file is effectively owned by your group.\n"
"      -N FILE        True if the file has been modified since it was last "
"read.\n"
"    \n"
"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
"                       modification date).\n"
"    \n"
"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
"    \n"
"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
"    \n"
"    String operators:\n"
"    \n"
"      -z STRING      True if string is empty.\n"
"    \n"
"      -n STRING\n"
"         STRING      True if string is not empty.\n"
"    \n"
"      STRING1 = STRING2\n"
"                     True if the strings are equal.\n"
"      STRING1 != STRING2\n"
"                     True if the strings are not equal.\n"
"      STRING1 < STRING2\n"
"                     True if STRING1 sorts before STRING2 "
"lexicographically.\n"
"      STRING1 > STRING2\n"
"                     True if STRING1 sorts after STRING2 lexicographically.\n"
"    \n"
"    Other operators:\n"
"    \n"
"      -o OPTION      True if the shell option OPTION is enabled.\n"
"      ! EXPR         True if expr is false.\n"
"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
"    \n"
"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
"                     -lt, -le, -gt, or -ge.\n"
"    \n"
"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
"    than ARG2.\n"
"    \n"
"    Exit Status:\n"
"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
"    false or an invalid argument is given."
msgstr ""
"Evaluate conditional expression.\n"
"    \n"
"    Exits with a status of 0 (true) or 1 (false) depending on\n"
"    the evaluation of EXPR.  Expressions may be unary or binary.  Unary\n"
"    expressions are often used to examine the status of a file.  There\n"
"    are string operators as well, and numeric comparison operators.\n"
"    \n"
"    File operators:\n"
"    \n"
"      -a FILE        True if file exists.\n"
"      -b FILE        True if file is block special.\n"
"      -c FILE        True if file is character special.\n"
"      -d FILE        True if file is a directory.\n"
"      -e FILE        True if file exists.\n"
"      -f FILE        True if file exists and is a regular file.\n"
"      -g FILE        True if file is set-group-id.\n"
"      -h FILE        True if file is a symbolic link.\n"
"      -L FILE        True if file is a symbolic link.\n"
"      -k FILE        True if file has its ‘sticky’ bit set.\n"
"      -p FILE        True if file is a named pipe.\n"
"      -r FILE        True if file is readable by you.\n"
"      -s FILE        True if file exists and is not empty.\n"
"      -S FILE        True if file is a socket.\n"
"      -t FD          True if FD is opened on a terminal.\n"
"      -u FILE        True if the file is set-user-id.\n"
"      -w FILE        True if the file is writable by you.\n"
"      -x FILE        True if the file is executable by you.\n"
"      -O FILE        True if the file is effectively owned by you.\n"
"      -G FILE        True if the file is effectively owned by your group.\n"
"      -N FILE        True if the file has been modified since it was last "
"read.\n"
"    \n"
"      FILE1 -nt FILE2  True if file1 is newer than file2 (according to\n"
"                       modification date).\n"
"    \n"
"      FILE1 -ot FILE2  True if file1 is older than file2.\n"
"    \n"
"      FILE1 -ef FILE2  True if file1 is a hard link to file2.\n"
"    \n"
"    String operators:\n"
"    \n"
"      -z STRING      True if string is empty.\n"
"    \n"
"      -n STRING\n"
"         STRING      True if string is not empty.\n"
"    \n"
"      STRING1 = STRING2\n"
"                     True if the strings are equal.\n"
"      STRING1 != STRING2\n"
"                     True if the strings are not equal.\n"
"      STRING1 < STRING2\n"
"                     True if STRING1 sorts before STRING2 "
"lexicographically.\n"
"      STRING1 > STRING2\n"
"                     True if STRING1 sorts after STRING2 lexicographically.\n"
"    \n"
"    Other operators:\n"
"    \n"
"      -o OPTION      True if the shell option OPTION is enabled.\n"
"      ! EXPR         True if expr is false.\n"
"      EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n"
"      EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n"
"    \n"
"      arg1 OP arg2   Arithmetic tests.  OP is one of -eq, -ne,\n"
"                     -lt, -le, -gt, or -ge.\n"
"    \n"
"    Arithmetic binary operators return true if ARG1 is equal, not-equal,\n"
"    less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n"
"    than ARG2.\n"
"    \n"
"    Exit Status:\n"
"    Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n"
"    false or an invalid argument is given."

#: builtins.c:1299
msgid ""
"Evaluate conditional expression.\n"
"    \n"
"    This is a synonym for the \"test\" builtin, but the last argument must\n"
"    be a literal `]', to match the opening `['."
msgstr ""
"Evaluate conditional expression.\n"
"    \n"
"    This is a synonym for the “test” builtin, but the last argument must\n"
"    be a literal ‘]’, to match the opening ‘[’."

#: builtins.c:1308
msgid ""
"Display process times.\n"
"    \n"
"    Prints the accumulated user and system times for the shell and all of "
"its\n"
"    child processes.\n"
"    \n"
"    Exit Status:\n"
"    Always succeeds."
msgstr ""
"Display process times.\n"
"    \n"
"    Prints the accumulated user and system times for the shell and all of "
"its\n"
"    child processes.\n"
"    \n"
"    Exit Status:\n"
"    Always succeeds."

#: builtins.c:1320
msgid ""
"Trap signals and other events.\n"
"    \n"
"    Defines and activates handlers to be run when the shell receives "
"signals\n"
"    or other conditions.\n"
"    \n"
"    ARG is a command to be read and executed when the shell receives the\n"
"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
"    is supplied) or `-', each specified signal is reset to its original\n"
"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
"    shell and by the commands it invokes.\n"
"    \n"
"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
"If\n"
"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.\n"
"    \n"
"    If no arguments are supplied, trap prints the list of commands "
"associated\n"
"    with each signal.\n"
"    \n"
"    Options:\n"
"      -l\tprint a list of signal names and their corresponding numbers\n"
"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
"    \n"
"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
"number.\n"
"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
"    signal may be sent to the shell with \"kill -signal $$\".\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless a SIGSPEC is invalid or an invalid option is "
"given."
msgstr ""
"Trap signals and other events.\n"
"    \n"
"    Defines and activates handlers to be run when the shell receives "
"signals\n"
"    or other conditions.\n"
"    \n"
"    ARG is a command to be read and executed when the shell receives the\n"
"    signal(s) SIGNAL_SPEC.  If ARG is absent (and a single SIGNAL_SPEC\n"
"    is supplied) or ‘-’, each specified signal is reset to its original\n"
"    value.  If ARG is the null string each SIGNAL_SPEC is ignored by the\n"
"    shell and by the commands it invokes.\n"
"    \n"
"    If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell.  "
"If\n"
"    a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command.\n"
"    \n"
"    If no arguments are supplied, trap prints the list of commands "
"associated\n"
"    with each signal.\n"
"    \n"
"    Options:\n"
"      -l\tprint a list of signal names and their corresponding numbers\n"
"      -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n"
"    \n"
"    Each SIGNAL_SPEC is either a signal name in <signal.h> or a signal "
"number.\n"
"    Signal names are case insensitive and the SIG prefix is optional.  A\n"
"    signal may be sent to the shell with “kill -signal $$”.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless a SIGSPEC is invalid or an invalid option is "
"given."

#: builtins.c:1352
msgid ""
"Display information about command type.\n"
"    \n"
"    For each NAME, indicate how it would be interpreted if used as a\n"
"    command name.\n"
"    \n"
"    Options:\n"
"      -a\tdisplay all locations containing an executable named NAME;\n"
"    \tincludes aliases, builtins, and functions, if and only if\n"
"    \tthe `-p' option is not also used\n"
"      -f\tsuppress shell function lookup\n"
"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
"    \tbuiltin, or function, and returns the name of the disk file\n"
"    \tthat would be executed\n"
"      -p\treturns either the name of the disk file that would be executed,\n"
"    \tor nothing if `type -t NAME' would not return `file'.\n"
"      -t\toutput a single word which is one of `alias', `keyword',\n"
"    \t`function', `builtin', `file' or `', if NAME is an alias, shell\n"
"    \treserved word, shell function, shell builtin, disk file, or not\n"
"    \tfound, respectively\n"
"    \n"
"    Arguments:\n"
"      NAME\tCommand name to be interpreted.\n"
"    \n"
"    Exit Status:\n"
"    Returns success if all of the NAMEs are found; fails if any are not "
"found."
msgstr ""
"Display information about command type.\n"
"    \n"
"    For each NAME, indicate how it would be interpreted if used as a\n"
"    command name.\n"
"    \n"
"    Options:\n"
"      -a\tdisplay all locations containing an executable named NAME;\n"
"    \tincludes aliases, builtins, and functions, if and only if\n"
"    \tthe ‘-p’ option is not also used\n"
"      -f\tsuppress shell function lookup\n"
"      -P\tforce a PATH search for each NAME, even if it is an alias,\n"
"    \tbuiltin, or function, and returns the name of the disk file\n"
"    \tthat would be executed\n"
"      -p\treturns either the name of the disk file that would be executed,\n"
"    \tor nothing if ‘type -t NAME’ would not return ‘file’.\n"
"      -t\toutput a single word which is one of ‘alias’, ‘keyword’,\n"
"    \t‘function’, ‘builtin’, ‘file’ or ‘’, if NAME is an alias, shell\n"
"    \treserved word, shell function, shell builtin, disk file, or not\n"
"    \tfound, respectively\n"
"    \n"
"    Arguments:\n"
"      NAME\tCommand name to be interpreted.\n"
"    \n"
"    Exit Status:\n"
"    Returns success if all of the NAMEs are found; fails if any are not "
"found."

#: builtins.c:1383
msgid ""
"Modify shell resource limits.\n"
"    \n"
"    Provides control over the resources available to the shell and "
"processes\n"
"    it creates, on systems that allow such control.\n"
"    \n"
"    Options:\n"
"      -S\tuse the `soft' resource limit\n"
"      -H\tuse the `hard' resource limit\n"
"      -a\tall current limits are reported\n"
"      -b\tthe socket buffer size\n"
"      -c\tthe maximum size of core files created\n"
"      -d\tthe maximum size of a process's data segment\n"
"      -e\tthe maximum scheduling priority (`nice')\n"
"      -f\tthe maximum size of files written by the shell and its children\n"
"      -i\tthe maximum number of pending signals\n"
"      -l\tthe maximum size a process may lock into memory\n"
"      -m\tthe maximum resident set size\n"
"      -n\tthe maximum number of open file descriptors\n"
"      -p\tthe pipe buffer size\n"
"      -q\tthe maximum number of bytes in POSIX message queues\n"
"      -r\tthe maximum real-time scheduling priority\n"
"      -s\tthe maximum stack size\n"
"      -t\tthe maximum amount of cpu time in seconds\n"
"      -u\tthe maximum number of user processes\n"
"      -v\tthe size of virtual memory\n"
"      -x\tthe maximum number of file locks\n"
"    \n"
"    If LIMIT is given, it is the new value of the specified resource; the\n"
"    special LIMIT values `soft', `hard', and `unlimited' stand for the\n"
"    current soft limit, the current hard limit, and no limit, respectively.\n"
"    Otherwise, the current value of the specified resource is printed.  If\n"
"    no option is given, then -f is assumed.\n"
"    \n"
"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
"    number of processes.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."
msgstr ""
"Modify shell resource limits.\n"
"    \n"
"    Provides control over the resources available to the shell and "
"processes\n"
"    it creates, on systems that allow such control.\n"
"    \n"
"    Options:\n"
"      -S\tuse the ‘soft’ resource limit\n"
"      -H\tuse the ‘hard’ resource limit\n"
"      -a\tall current limits are reported\n"
"      -b\tthe socket buffer size\n"
"      -c\tthe maximum size of core files created\n"
"      -d\tthe maximum size of a process's data segment\n"
"      -e\tthe maximum scheduling priority (‘nice’)\n"
"      -f\tthe maximum size of files written by the shell and its children\n"
"      -i\tthe maximum number of pending signals\n"
"      -l\tthe maximum size a process may lock into memory\n"
"      -m\tthe maximum resident set size\n"
"      -n\tthe maximum number of open file descriptors\n"
"      -p\tthe pipe buffer size\n"
"      -q\tthe maximum number of bytes in POSIX message queues\n"
"      -r\tthe maximum real-time scheduling priority\n"
"      -s\tthe maximum stack size\n"
"      -t\tthe maximum amount of cpu time in seconds\n"
"      -u\tthe maximum number of user processes\n"
"      -v\tthe size of virtual memory\n"
"      -x\tthe maximum number of file locks\n"
"    \n"
"    If LIMIT is given, it is the new value of the specified resource; the\n"
"    special LIMIT values ‘soft’, ‘hard’, and ‘unlimited’ stand for the\n"
"    current soft limit, the current hard limit, and no limit, respectively.\n"
"    Otherwise, the current value of the specified resource is printed.  If\n"
"    no option is given, then -f is assumed.\n"
"    \n"
"    Values are in 1024-byte increments, except for -t, which is in seconds,\n"
"    -p, which is in increments of 512 bytes, and -u, which is an unscaled\n"
"    number of processes.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."

#: builtins.c:1428
msgid ""
"Display or set file mode mask.\n"
"    \n"
"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
"    the current value of the mask.\n"
"    \n"
"    If MODE begins with a digit, it is interpreted as an octal number;\n"
"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
"    \n"
"    Options:\n"
"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless MODE is invalid or an invalid option is given."
msgstr ""
"Display or set file mode mask.\n"
"    \n"
"    Sets the user file-creation mask to MODE.  If MODE is omitted, prints\n"
"    the current value of the mask.\n"
"    \n"
"    If MODE begins with a digit, it is interpreted as an octal number;\n"
"    otherwise it is a symbolic mode string like that accepted by chmod(1).\n"
"    \n"
"    Options:\n"
"      -p\tif MODE is omitted, output in a form that may be reused as input\n"
"      -S\tmakes the output symbolic; otherwise an octal number is output\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless MODE is invalid or an invalid option is given."

#: builtins.c:1448
msgid ""
"Wait for job completion and return exit status.\n"
"    \n"
"    Waits for the process identified by ID, which may be a process ID or a\n"
"    job specification, and reports its termination status.  If ID is not\n"
"    given, waits for all currently active child processes, and the return\n"
"    status is zero.  If ID is a a job specification, waits for all "
"processes\n"
"    in the job's pipeline.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of ID; fails if ID is invalid or an invalid option "
"is\n"
"    given."
msgstr ""
"Wait for job completion and return exit status.\n"
"    \n"
"    Waits for the process identified by ID, which may be a process ID or a\n"
"    job specification, and reports its termination status.  If ID is not\n"
"    given, waits for all currently active child processes, and the return\n"
"    status is zero.  If ID is a a job specification, waits for all "
"processes\n"
"    in the job's pipeline.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of ID; fails if ID is invalid or an invalid option "
"is\n"
"    given."

#: builtins.c:1466
msgid ""
"Wait for process completion and return exit status.\n"
"    \n"
"    Waits for the specified process and reports its termination status.  If\n"
"    PID is not given, all currently active child processes are waited for,\n"
"    and the return code is zero.  PID must be a process ID.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of ID; fails if ID is invalid or an invalid option "
"is\n"
"    given."
msgstr ""
"Wait for process completion and return exit status.\n"
"    \n"
"    Waits for the specified process and reports its termination status.  If\n"
"    PID is not given, all currently active child processes are waited for,\n"
"    and the return code is zero.  PID must be a process ID.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of ID; fails if ID is invalid or an invalid option "
"is\n"
"    given."

#: builtins.c:1481
msgid ""
"Execute commands for each member in a list.\n"
"    \n"
"    The `for' loop executes a sequence of commands for each member in a\n"
"    list of items.  If `in WORDS ...;' is not present, then `in \"$@\"' is\n"
"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
"    the COMMANDS are executed.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."
msgstr ""
"Execute commands for each member in a list.\n"
"    \n"
"    The ‘for’ loop executes a sequence of commands for each member in a\n"
"    list of items.  If ‘in WORDS ...;’ is not present, then ‘in “$@”’ is\n"
"    assumed.  For each element in WORDS, NAME is set to that element, and\n"
"    the COMMANDS are executed.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."

#: builtins.c:1495
msgid ""
"Arithmetic for loop.\n"
"    \n"
"    Equivalent to\n"
"    \t(( EXP1 ))\n"
"    \twhile (( EXP2 )); do\n"
"    \t\tCOMMANDS\n"
"    \t\t(( EXP3 ))\n"
"    \tdone\n"
"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
"    omitted, it behaves as if it evaluates to 1.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."
msgstr ""
"Arithmetic for loop.\n"
"    \n"
"    Equivalent to\n"
"    \t(( EXP1 ))\n"
"    \twhile (( EXP2 )); do\n"
"    \t\tCOMMANDS\n"
"    \t\t(( EXP3 ))\n"
"    \tdone\n"
"    EXP1, EXP2, and EXP3 are arithmetic expressions.  If any expression is\n"
"    omitted, it behaves as if it evaluates to 1.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."

#: builtins.c:1513
msgid ""
"Select words from a list and execute commands.\n"
"    \n"
"    The WORDS are expanded, generating a list of words.  The\n"
"    set of expanded words is printed on the standard error, each\n"
"    preceded by a number.  If `in WORDS' is not present, `in \"$@\"'\n"
"    is assumed.  The PS3 prompt is then displayed and a line read\n"
"    from the standard input.  If the line consists of the number\n"
"    corresponding to one of the displayed words, then NAME is set\n"
"    to that word.  If the line is empty, WORDS and the prompt are\n"
"    redisplayed.  If EOF is read, the command completes.  Any other\n"
"    value read causes NAME to be set to null.  The line read is saved\n"
"    in the variable REPLY.  COMMANDS are executed after each selection\n"
"    until a break command is executed.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."
msgstr ""
"Select words from a list and execute commands.\n"
"    \n"
"    The WORDS are expanded, generating a list of words.  The\n"
"    set of expanded words is printed on the standard error, each\n"
"    preceded by a number.  If ‘in WORDS’ is not present, ‘in “$@”’\n"
"    is assumed.  The PS3 prompt is then displayed and a line read\n"
"    from the standard input.  If the line consists of the number\n"
"    corresponding to one of the displayed words, then NAME is set\n"
"    to that word.  If the line is empty, WORDS and the prompt are\n"
"    redisplayed.  If EOF is read, the command completes.  Any other\n"
"    value read causes NAME to be set to null.  The line read is saved\n"
"    in the variable REPLY.  COMMANDS are executed after each selection\n"
"    until a break command is executed.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."

#: builtins.c:1534
msgid ""
"Report time consumed by pipeline's execution.\n"
"    \n"
"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
"    and system CPU time spent executing PIPELINE when it terminates.\n"
"    \n"
"    Options:\n"
"      -p\tprint the timing summary in the portable Posix format\n"
"    \n"
"    The value of the TIMEFORMAT variable is used as the output format.\n"
"    \n"
"    Exit Status:\n"
"    The return status is the return status of PIPELINE."
msgstr ""
"Report time consumed by pipeline's execution.\n"
"    \n"
"    Execute PIPELINE and print a summary of the real time, user CPU time,\n"
"    and system CPU time spent executing PIPELINE when it terminates.\n"
"    \n"
"    Options:\n"
"      -p\tprint the timing summary in the portable Posix format\n"
"    \n"
"    The value of the TIMEFORMAT variable is used as the output format.\n"
"    \n"
"    Exit Status:\n"
"    The return status is the return status of PIPELINE."

#: builtins.c:1551
msgid ""
"Execute commands based on pattern matching.\n"
"    \n"
"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
"    `|' is used to separate multiple patterns.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."
msgstr ""
"Execute commands based on pattern matching.\n"
"    \n"
"    Selectively execute COMMANDS based upon WORD matching PATTERN.  The\n"
"    ‘|’ is used to separate multiple patterns.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."

#: builtins.c:1563
msgid ""
"Execute commands based on conditional.\n"
"    \n"
"    The `if COMMANDS' list is executed.  If its exit status is zero, then "
"the\n"
"    `then COMMANDS' list is executed.  Otherwise, each `elif COMMANDS' list "
"is\n"
"    executed in turn, and if its exit status is zero, the corresponding\n"
"    `then COMMANDS' list is executed and the if command completes.  "
"Otherwise,\n"
"    the `else COMMANDS' list is executed, if present.  The exit status of "
"the\n"
"    entire construct is the exit status of the last command executed, or "
"zero\n"
"    if no condition tested true.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."
msgstr ""
"Execute commands based on conditional.\n"
"    \n"
"    The ‘if COMMANDS’ list is executed.  If its exit status is zero, then "
"the\n"
"    ‘then COMMANDS’ list is executed.  Otherwise, each ‘elif COMMANDS’ list "
"is\n"
"    executed in turn, and if its exit status is zero, the corresponding\n"
"    ‘then COMMANDS’ list is executed and the if command completes.  "
"Otherwise,\n"
"    the ‘else COMMANDS’ list is executed, if present.  The exit status of "
"the\n"
"    entire construct is the exit status of the last command executed, or "
"zero\n"
"    if no condition tested true.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."

#: builtins.c:1580
msgid ""
"Execute commands as long as a test succeeds.\n"
"    \n"
"    Expand and execute COMMANDS as long as the final command in the\n"
"    `while' COMMANDS has an exit status of zero.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."
msgstr ""
"Execute commands as long as a test succeeds.\n"
"    \n"
"    Expand and execute COMMANDS as long as the final command in the\n"
"    ‘while’ COMMANDS has an exit status of zero.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."

#: builtins.c:1592
msgid ""
"Execute commands as long as a test does not succeed.\n"
"    \n"
"    Expand and execute COMMANDS as long as the final command in the\n"
"    `until' COMMANDS has an exit status which is not zero.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."
msgstr ""
"Execute commands as long as a test does not succeed.\n"
"    \n"
"    Expand and execute COMMANDS as long as the final command in the\n"
"    ‘until’ COMMANDS has an exit status which is not zero.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."

#: builtins.c:1604
msgid ""
"Create a coprocess named NAME.\n"
"    \n"
"    Execute COMMAND asynchronously, with the standard output and standard\n"
"    input of the command connected via a pipe to file descriptors assigned\n"
"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
"    The default NAME is \"COPROC\".\n"
"    \n"
"    Exit Status:\n"
"    Returns the exit status of COMMAND."
msgstr ""
"Create a coprocess named NAME.\n"
"    \n"
"    Execute COMMAND asynchronously, with the standard output and standard\n"
"    input of the command connected via a pipe to file descriptors assigned\n"
"    to indices 0 and 1 of an array variable NAME in the executing shell.\n"
"    The default NAME is “COPROC”.\n"
"    \n"
"    Exit Status:\n"
"    Returns the exit status of COMMAND."

#: builtins.c:1618
msgid ""
"Define shell function.\n"
"    \n"
"    Create a shell function named NAME.  When invoked as a simple command,\n"
"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
"invoked,\n"
"    the arguments are passed to the function as $1...$n, and the function's\n"
"    name is in $FUNCNAME.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless NAME is readonly."
msgstr ""
"Define shell function.\n"
"    \n"
"    Create a shell function named NAME.  When invoked as a simple command,\n"
"    NAME runs COMMANDs in the calling shell's context.  When NAME is "
"invoked,\n"
"    the arguments are passed to the function as $1...$n, and the function's\n"
"    name is in $FUNCNAME.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless NAME is readonly."

#: builtins.c:1632
msgid ""
"Group commands as a unit.\n"
"    \n"
"    Run a set of commands in a group.  This is one way to redirect an\n"
"    entire set of commands.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."
msgstr ""
"Group commands as a unit.\n"
"    \n"
"    Run a set of commands in a group.  This is one way to redirect an\n"
"    entire set of commands.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the last command executed."

#: builtins.c:1644
msgid ""
"Resume job in foreground.\n"
"    \n"
"    Equivalent to the JOB_SPEC argument to the `fg' command.  Resume a\n"
"    stopped or background job.  JOB_SPEC can specify either a job name\n"
"    or a job number.  Following JOB_SPEC with a `&' places the job in\n"
"    the background, as if the job specification had been supplied as an\n"
"    argument to `bg'.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the resumed job."
msgstr ""
"Resume job in foreground.\n"
"    \n"
"    Equivalent to the JOB_SPEC argument to the ‘fg’ command.  Resume a\n"
"    stopped or background job.  JOB_SPEC can specify either a job name\n"
"    or a job number.  Following JOB_SPEC with a ‘&’ places the job in\n"
"    the background, as if the job specification had been supplied as an\n"
"    argument to ‘bg’.\n"
"    \n"
"    Exit Status:\n"
"    Returns the status of the resumed job."

#: builtins.c:1659
msgid ""
"Evaluate arithmetic expression.\n"
"    \n"
"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
"    evaluation.  Equivalent to \"let EXPRESSION\".\n"
"    \n"
"    Exit Status:\n"
"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."
msgstr ""
"Evaluate arithmetic expression.\n"
"    \n"
"    The EXPRESSION is evaluated according to the rules for arithmetic\n"
"    evaluation.  Equivalent to “let EXPRESSION”.\n"
"    \n"
"    Exit Status:\n"
"    Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise."

#: builtins.c:1671
msgid ""
"Execute conditional command.\n"
"    \n"
"    Returns a status of 0 or 1 depending on the evaluation of the "
"conditional\n"
"    expression EXPRESSION.  Expressions are composed of the same primaries "
"used\n"
"    by the `test' builtin, and may be combined using the following "
"operators:\n"
"    \n"
"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
"    \n"
"    When the `==' and `!=' operators are used, the string to the right of\n"
"    the operator is used as a pattern and pattern matching is performed.\n"
"    When the `=~' operator is used, the string to the right of the operator\n"
"    is matched as a regular expression.\n"
"    \n"
"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
"    determine the expression's value.\n"
"    \n"
"    Exit Status:\n"
"    0 or 1 depending on value of EXPRESSION."
msgstr ""
"Execute conditional command.\n"
"    \n"
"    Returns a status of 0 or 1 depending on the evaluation of the "
"conditional\n"
"    expression EXPRESSION.  Expressions are composed of the same primaries "
"used\n"
"    by the ‘test’ builtin, and may be combined using the following "
"operators:\n"
"    \n"
"      ( EXPRESSION )\tReturns the value of EXPRESSION\n"
"      ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n"
"      EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n"
"      EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n"
"    \n"
"    When the ‘==’ and ‘!=’ operators are used, the string to the right of\n"
"    the operator is used as a pattern and pattern matching is performed.\n"
"    When the ‘=~’ operator is used, the string to the right of the operator\n"
"    is matched as a regular expression.\n"
"    \n"
"    The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n"
"    determine the expression's value.\n"
"    \n"
"    Exit Status:\n"
"    0 or 1 depending on value of EXPRESSION."

#: builtins.c:1697
msgid ""
"Common shell variable names and usage.\n"
"    \n"
"    BASH_VERSION\tVersion information for this Bash.\n"
"    CDPATH\tA colon-separated list of directories to search\n"
"    \t\tfor directories given as arguments to `cd'.\n"
"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
"    \t\tbe ignored by pathname expansion.\n"
"    HISTFILE\tThe name of the file where your command history is stored.\n"
"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
"    HISTSIZE\tThe maximum number of history lines that a running\n"
"    \t\tshell can access.\n"
"    HOME\tThe complete pathname to your login directory.\n"
"    HOSTNAME\tThe name of the current host.\n"
"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
"    \t\tcharacter as the sole input.  If set, then the value\n"
"    \t\tof it is the number of EOF characters that can be seen\n"
"    \t\tin a row on an empty line before the shell will exit\n"
"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
"    MACHTYPE\tA string describing the current system Bash is running on.\n"
"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
"    \t\tfor new mail.\n"
"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
"    PATH\tA colon-separated list of directories to search when\n"
"    \t\tlooking for commands.\n"
"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
"    \t\tprimary prompt.\n"
"    PS1\t\tThe primary prompt string.\n"
"    PS2\t\tThe secondary prompt string.\n"
"    PWD\t\tThe full pathname of the current directory.\n"
"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
"    TERM\tThe name of the current terminal type.\n"
"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
"    \t\t`time' reserved word.\n"
"    auto_resume\tNon-null means a command word appearing on a line by\n"
"    \t\titself is first looked for in the list of currently\n"
"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
"    \t\tA value of `exact' means that the command word must\n"
"    \t\texactly match a command in the list of stopped jobs.  A\n"
"    \t\tvalue of `substring' means that the command word must\n"
"    \t\tmatch a substring of the job.  Any other value means that\n"
"    \t\tthe command must be a prefix of a stopped job.\n"
"    histchars\tCharacters controlling history expansion and quick\n"
"    \t\tsubstitution.  The first character is the history\n"
"    \t\tsubstitution character, usually `!'.  The second is\n"
"    \t\tthe `quick substitution' character, usually `^'.  The\n"
"    \t\tthird is the `history comment' character, usually `#'.\n"
"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
"    \t\tcommands should be saved on the history list.\n"
msgstr ""
"Common shell variable names and usage.\n"
"    \n"
"    BASH_VERSION\tVersion information for this Bash.\n"
"    CDPATH\tA colon-separated list of directories to search\n"
"    \t\tfor directories given as arguments to ‘cd’.\n"
"    GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n"
"    \t\tbe ignored by pathname expansion.\n"
"    HISTFILE\tThe name of the file where your command history is stored.\n"
"    HISTFILESIZE\tThe maximum number of lines this file can contain.\n"
"    HISTSIZE\tThe maximum number of history lines that a running\n"
"    \t\tshell can access.\n"
"    HOME\tThe complete pathname to your login directory.\n"
"    HOSTNAME\tThe name of the current host.\n"
"    HOSTTYPE\tThe type of CPU this version of Bash is running under.\n"
"    IGNOREEOF\tControls the action of the shell on receipt of an EOF\n"
"    \t\tcharacter as the sole input.  If set, then the value\n"
"    \t\tof it is the number of EOF characters that can be seen\n"
"    \t\tin a row on an empty line before the shell will exit\n"
"    \t\t(default 10).  When unset, EOF signifies the end of input.\n"
"    MACHTYPE\tA string describing the current system Bash is running on.\n"
"    MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n"
"    MAILPATH\tA colon-separated list of filenames which Bash checks\n"
"    \t\tfor new mail.\n"
"    OSTYPE\tThe version of Unix this version of Bash is running on.\n"
"    PATH\tA colon-separated list of directories to search when\n"
"    \t\tlooking for commands.\n"
"    PROMPT_COMMAND\tA command to be executed before the printing of each\n"
"    \t\tprimary prompt.\n"
"    PS1\t\tThe primary prompt string.\n"
"    PS2\t\tThe secondary prompt string.\n"
"    PWD\t\tThe full pathname of the current directory.\n"
"    SHELLOPTS\tA colon-separated list of enabled shell options.\n"
"    TERM\tThe name of the current terminal type.\n"
"    TIMEFORMAT\tThe output format for timing statistics displayed by the\n"
"    \t\t‘time’ reserved word.\n"
"    auto_resume\tNon-null means a command word appearing on a line by\n"
"    \t\titself is first looked for in the list of currently\n"
"    \t\tstopped jobs.  If found there, that job is foregrounded.\n"
"    \t\tA value of ‘exact’ means that the command word must\n"
"    \t\texactly match a command in the list of stopped jobs.  A\n"
"    \t\tvalue of ‘substring’ means that the command word must\n"
"    \t\tmatch a substring of the job.  Any other value means that\n"
"    \t\tthe command must be a prefix of a stopped job.\n"
"    histchars\tCharacters controlling history expansion and quick\n"
"    \t\tsubstitution.  The first character is the history\n"
"    \t\tsubstitution character, usually ‘!’.  The second is\n"
"    \t\tthe ‘quick substitution’ character, usually ‘^’.  The\n"
"    \t\tthird is the ‘history comment’ character, usually ‘#’.\n"
"    HISTIGNORE\tA colon-separated list of patterns used to decide which\n"
"    \t\tcommands should be saved on the history list.\n"

#: builtins.c:1754
msgid ""
"Add directories to stack.\n"
"    \n"
"    Adds a directory to the top of the directory stack, or rotates\n"
"    the stack, making the new top of the stack the current working\n"
"    directory.  With no arguments, exchanges the top two directories.\n"
"    \n"
"    Options:\n"
"      -n\tSuppresses the normal change of directory when adding\n"
"    \tdirectories to the stack, so only the stack is manipulated.\n"
"    \n"
"    Arguments:\n"
"      +N\tRotates the stack so that the Nth directory (counting\n"
"    \tfrom the left of the list shown by `dirs', starting with\n"
"    \tzero) is at the top.\n"
"    \n"
"      -N\tRotates the stack so that the Nth directory (counting\n"
"    \tfrom the right of the list shown by `dirs', starting with\n"
"    \tzero) is at the top.\n"
"    \n"
"      dir\tAdds DIR to the directory stack at the top, making it the\n"
"    \tnew current working directory.\n"
"    \n"
"    The `dirs' builtin displays the directory stack.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid argument is supplied or the directory\n"
"    change fails."
msgstr ""
"Add directories to stack.\n"
"    \n"
"    Adds a directory to the top of the directory stack, or rotates\n"
"    the stack, making the new top of the stack the current working\n"
"    directory.  With no arguments, exchanges the top two directories.\n"
"    \n"
"    Options:\n"
"      -n\tSuppresses the normal change of directory when adding\n"
"    \tdirectories to the stack, so only the stack is manipulated.\n"
"    \n"
"    Arguments:\n"
"      +N\tRotates the stack so that the Nth directory (counting\n"
"    \tfrom the left of the list shown by ‘dirs’, starting with\n"
"    \tzero) is at the top.\n"
"    \n"
"      -N\tRotates the stack so that the Nth directory (counting\n"
"    \tfrom the right of the list shown by ‘dirs’, starting with\n"
"    \tzero) is at the top.\n"
"    \n"
"      dir\tAdds DIR to the directory stack at the top, making it the\n"
"    \tnew current working directory.\n"
"    \n"
"    The ‘dirs’ builtin displays the directory stack.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid argument is supplied or the directory\n"
"    change fails."

#: builtins.c:1788
msgid ""
"Remove directories from stack.\n"
"    \n"
"    Removes entries from the directory stack.  With no arguments, removes\n"
"    the top directory from the stack, and changes to the new top directory.\n"
"    \n"
"    Options:\n"
"      -n\tSuppresses the normal change of directory when removing\n"
"    \tdirectories from the stack, so only the stack is manipulated.\n"
"    \n"
"    Arguments:\n"
"      +N\tRemoves the Nth entry counting from the left of the list\n"
"    \tshown by `dirs', starting with zero.  For example: `popd +0'\n"
"    \tremoves the first directory, `popd +1' the second.\n"
"    \n"
"      -N\tRemoves the Nth entry counting from the right of the list\n"
"    \tshown by `dirs', starting with zero.  For example: `popd -0'\n"
"    \tremoves the last directory, `popd -1' the next to last.\n"
"    \n"
"    The `dirs' builtin displays the directory stack.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid argument is supplied or the directory\n"
"    change fails."
msgstr ""
"Remove directories from stack.\n"
"    \n"
"    Removes entries from the directory stack.  With no arguments, removes\n"
"    the top directory from the stack, and changes to the new top directory.\n"
"    \n"
"    Options:\n"
"      -n\tSuppresses the normal change of directory when removing\n"
"    \tdirectories from the stack, so only the stack is manipulated.\n"
"    \n"
"    Arguments:\n"
"      +N\tRemoves the Nth entry counting from the left of the list\n"
"    \tshown by ‘dirs’, starting with zero.  For example: ‘popd +0’\n"
"    \tremoves the first directory, ‘popd +1’ the second.\n"
"    \n"
"      -N\tRemoves the Nth entry counting from the right of the list\n"
"    \tshown by ‘dirs’, starting with zero.  For example: ‘popd -0’\n"
"    \tremoves the last directory, ‘popd -1’ the next to last.\n"
"    \n"
"    The ‘dirs’ builtin displays the directory stack.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid argument is supplied or the directory\n"
"    change fails."

#: builtins.c:1818
msgid ""
"Display directory stack.\n"
"    \n"
"    Display the list of currently remembered directories.  Directories\n"
"    find their way onto the list with the `pushd' command; you can get\n"
"    back up through the list with the `popd' command.\n"
"    \n"
"    Options:\n"
"      -c\tclear the directory stack by deleting all of the elements\n"
"      -l\tdo not print tilde-prefixed versions of directories relative\n"
"    \tto your home directory\n"
"      -p\tprint the directory stack with one entry per line\n"
"      -v\tprint the directory stack with one entry per line prefixed\n"
"    \twith its position in the stack\n"
"    \n"
"    Arguments:\n"
"      +N\tDisplays the Nth entry counting from the left of the list shown "
"by\n"
"    \tdirs when invoked without options, starting with zero.\n"
"    \n"
"      -N\tDisplays the Nth entry counting from the right of the list shown "
"by\n"
"    \tdirs when invoked without options, starting with zero.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."
msgstr ""
"Display directory stack.\n"
"    \n"
"    Display the list of currently remembered directories.  Directories\n"
"    find their way onto the list with the ‘pushd’ command; you can get\n"
"    back up through the list with the ‘popd’ command.\n"
"    \n"
"    Options:\n"
"      -c\tclear the directory stack by deleting all of the elements\n"
"      -l\tdo not print tilde-prefixed versions of directories relative\n"
"    \tto your home directory\n"
"      -p\tprint the directory stack with one entry per line\n"
"      -v\tprint the directory stack with one entry per line prefixed\n"
"    \twith its position in the stack\n"
"    \n"
"    Arguments:\n"
"      +N\tDisplays the Nth entry counting from the left of the list shown "
"by\n"
"    \tdirs when invoked without options, starting with zero.\n"
"    \n"
"      -N\tDisplays the Nth entry counting from the right of the list shown "
"by\n"
"    \tdirs when invoked without options, starting with zero.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."

#: builtins.c:1847
msgid ""
"Set and unset shell options.\n"
"    \n"
"    Change the setting of each shell option OPTNAME.  Without any option\n"
"    arguments, list all shell options with an indication of whether or not "
"each\n"
"    is set.\n"
"    \n"
"    Options:\n"
"      -o\trestrict OPTNAMEs to those defined for use with `set -o'\n"
"      -p\tprint each shell option with an indication of its status\n"
"      -q\tsuppress output\n"
"      -s\tenable (set) each OPTNAME\n"
"      -u\tdisable (unset) each OPTNAME\n"
"    \n"
"    Exit Status:\n"
"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
"    given or OPTNAME is disabled."
msgstr ""
"Set and unset shell options.\n"
"    \n"
"    Change the setting of each shell option OPTNAME.  Without any option\n"
"    arguments, list all shell options with an indication of whether or not "
"each\n"
"    is set.\n"
"    \n"
"    Options:\n"
"      -o\trestrict OPTNAMEs to those defined for use with ‘set -o’\n"
"      -p\tprint each shell option with an indication of its status\n"
"      -q\tsuppress output\n"
"      -s\tenable (set) each OPTNAME\n"
"      -u\tdisable (unset) each OPTNAME\n"
"    \n"
"    Exit Status:\n"
"    Returns success if OPTNAME is enabled; fails if an invalid option is\n"
"    given or OPTNAME is disabled."

#: builtins.c:1868
msgid ""
"Formats and prints ARGUMENTS under control of the FORMAT.\n"
"    \n"
"    Options:\n"
"      -v var\tassign the output to shell variable VAR rather than\n"
"    \t\tdisplay it on the standard output\n"
"    \n"
"    FORMAT is a character string which contains three types of objects: "
"plain\n"
"    characters, which are simply copied to standard output; character "
"escape\n"
"    sequences, which are converted and copied to the standard output; and\n"
"    format specifications, each of which causes printing of the next "
"successive\n"
"    argument.\n"
"    \n"
"    In addition to the standard format specifications described in printf"
"(1)\n"
"    and printf(3), printf interprets:\n"
"    \n"
"      %b\texpand backslash escape sequences in the corresponding argument\n"
"      %q\tquote the argument in a way that can be reused as shell input\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or a write or "
"assignment\n"
"    error occurs."
msgstr ""
"Formats and prints ARGUMENTS under control of the FORMAT.\n"
"    \n"
"    Options:\n"
"      -v var\tassign the output to shell variable VAR rather than\n"
"    \t\tdisplay it on the standard output\n"
"    \n"
"    FORMAT is a character string which contains three types of objects: "
"plain\n"
"    characters, which are simply copied to standard output; character "
"escape\n"
"    sequences, which are converted and copied to the standard output; and\n"
"    format specifications, each of which causes printing of the next "
"successive\n"
"    argument.\n"
"    \n"
"    In addition to the standard format specifications described in printf"
"(1)\n"
"    and printf(3), printf interprets:\n"
"    \n"
"      %b\texpand backslash escape sequences in the corresponding argument\n"
"      %q\tquote the argument in a way that can be reused as shell input\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or a write or "
"assignment\n"
"    error occurs."

#: builtins.c:1895
msgid ""
"Specify how arguments are to be completed by Readline.\n"
"    \n"
"    For each NAME, specify how arguments are to be completed.  If no "
"options\n"
"    are supplied, existing completion specifications are printed in a way "
"that\n"
"    allows them to be reused as input.\n"
"    \n"
"    Options:\n"
"      -p\tprint existing completion specifications in a reusable format\n"
"      -r\tremove a completion specification for each NAME, or, if no\n"
"    \tNAMEs are supplied, all completion specifications\n"
"      -D\tapply the completions and actions as the default for commands\n"
"    \twithout any specific completion defined\n"
"      -E\tapply the completions and actions to \"empty\" commands --\n"
"    \tcompletion attempted on a blank line\n"
"    \n"
"    When completion is attempted, the actions are applied in the order the\n"
"    uppercase-letter options are listed above.  The -D option takes\n"
"    precedence over -E.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."
msgstr ""
"Specify how arguments are to be completed by Readline.\n"
"    \n"
"    For each NAME, specify how arguments are to be completed.  If no "
"options\n"
"    are supplied, existing completion specifications are printed in a way "
"that\n"
"    allows them to be reused as input.\n"
"    \n"
"    Options:\n"
"      -p\tprint existing completion specifications in a reusable format\n"
"      -r\tremove a completion specification for each NAME, or, if no\n"
"    \tNAMEs are supplied, all completion specifications\n"
"      -D\tapply the completions and actions as the default for commands\n"
"    \twithout any specific completion defined\n"
"      -E\tapply the completions and actions to “empty” commands --\n"
"    \tcompletion attempted on a blank line\n"
"    \n"
"    When completion is attempted, the actions are applied in the order the\n"
"    uppercase-letter options are listed above.  The -D option takes\n"
"    precedence over -E.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."

#: builtins.c:1923
msgid ""
"Display possible completions depending on the options.\n"
"    \n"
"    Intended to be used from within a shell function generating possible\n"
"    completions.  If the optional WORD argument is supplied, matches "
"against\n"
"    WORD are generated.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."
msgstr ""
"Display possible completions depending on the options.\n"
"    \n"
"    Intended to be used from within a shell function generating possible\n"
"    completions.  If the optional WORD argument is supplied, matches "
"against\n"
"    WORD are generated.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or an error occurs."

#: builtins.c:1938
msgid ""
"Modify or display completion options.\n"
"    \n"
"    Modify the completion options for each NAME, or, if no NAMEs are "
"supplied,\n"
"    the completion currently begin executed.  If no OPTIONs are givenm, "
"print\n"
"    the completion options for each NAME or the current completion "
"specification.\n"
"    \n"
"    Options:\n"
"    \t-o option\tSet completion option OPTION for each NAME\n"
"    \t-D\t\tChange options for the \"default\" command completion\n"
"    \t-E\t\tChange options for the \"empty\" command completion\n"
"    \n"
"    Using `+o' instead of `-o' turns off the specified option.\n"
"    \n"
"    Arguments:\n"
"    \n"
"    Each NAME refers to a command for which a completion specification must\n"
"    have previously been defined using the `complete' builtin.  If no NAMEs\n"
"    are supplied, compopt must be called by a function currently generating\n"
"    completions, and the options for that currently-executing completion\n"
"    generator are modified.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or NAME does not\n"
"    have a completion specification defined."
msgstr ""
"Modify or display completion options.\n"
"    \n"
"    Modify the completion options for each NAME, or, if no NAMEs are "
"supplied,\n"
"    the completion currently begin executed.  If no OPTIONs are givenm, "
"print\n"
"    the completion options for each NAME or the current completion "
"specification.\n"
"    \n"
"    Options:\n"
"    \t-o option\tSet completion option OPTION for each NAME\n"
"    \t-D\t\tChange options for the “default” command completion\n"
"    \t-E\t\tChange options for the “empty” command completion\n"
"    \n"
"    Using ‘+o’ instead of ‘-o’ turns off the specified option.\n"
"    \n"
"    Arguments:\n"
"    \n"
"    Each NAME refers to a command for which a completion specification must\n"
"    have previously been defined using the ‘complete’ builtin.  If no NAMEs\n"
"    are supplied, compopt must be called by a function currently generating\n"
"    completions, and the options for that currently-executing completion\n"
"    generator are modified.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is supplied or NAME does not\n"
"    have a completion specification defined."

#: builtins.c:1968
msgid ""
"Read lines from the standard input into an indexed array variable.\n"
"    \n"
"    Read lines from the standard input into the indexed array variable "
"ARRAY, or\n"
"    from file descriptor FD if the -u option is supplied.  The variable "
"MAPFILE\n"
"    is the default ARRAY.\n"
"    \n"
"    Options:\n"
"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
"copied.\n"
"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
"index is 0.\n"
"      -s count \tDiscard the first COUNT lines read.\n"
"      -t\t\tRemove a trailing newline from each line read.\n"
"      -u fd\t\tRead lines from file descriptor FD instead of the standard "
"input.\n"
"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read.\n"
"      -c quantum\tSpecify the number of lines read between each call to "
"CALLBACK.\n"
"    \n"
"    Arguments:\n"
"      ARRAY\t\tArray variable name to use for file data.\n"
"    \n"
"    If -C is supplied without -c, the default quantum is 5000.  When\n"
"    CALLBACK is evaluated, it is supplied the index of the next array\n"
"    element to be assigned as an additional argument.\n"
"    \n"
"    If not supplied with an explicit origin, mapfile will clear ARRAY "
"before\n"
"    assigning to it.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or ARRAY is readonly "
"or\n"
"    not an indexed array."
msgstr ""
"Read lines from the standard input into an indexed array variable.\n"
"    \n"
"    Read lines from the standard input into the indexed array variable "
"ARRAY, or\n"
"    from file descriptor FD if the -u option is supplied.  The variable "
"MAPFILE\n"
"    is the default ARRAY.\n"
"    \n"
"    Options:\n"
"      -n count\tCopy at most COUNT lines.  If COUNT is 0, all lines are "
"copied.\n"
"      -O origin\tBegin assigning to ARRAY at index ORIGIN.  The default "
"index is 0.\n"
"      -s count \tDiscard the first COUNT lines read.\n"
"      -t\t\tRemove a trailing newline from each line read.\n"
"      -u fd\t\tRead lines from file descriptor FD instead of the standard "
"input.\n"
"      -C callback\tEvaluate CALLBACK each time QUANTUM lines are read.\n"
"      -c quantum\tSpecify the number of lines read between each call to "
"CALLBACK.\n"
"    \n"
"    Arguments:\n"
"      ARRAY\t\tArray variable name to use for file data.\n"
"    \n"
"    If -C is supplied without -c, the default quantum is 5000.  When\n"
"    CALLBACK is evaluated, it is supplied the index of the next array\n"
"    element to be assigned as an additional argument.\n"
"    \n"
"    If not supplied with an explicit origin, mapfile will clear ARRAY "
"before\n"
"    assigning to it.\n"
"    \n"
"    Exit Status:\n"
"    Returns success unless an invalid option is given or ARRAY is readonly "
"or\n"
"    not an indexed array."

#: builtins.c:2001
msgid ""
"Read lines from a file into an array variable.\n"
"    \n"
"    A synonym for `mapfile'."
msgstr ""
"Read lines from a file into an array variable.\n"
"    \n"
"    A synonym for ‘mapfile’."