| /* -*- c-file-style: "linux" -*- |
| * |
| * Copyright (C) 1998-2001 by Andrew Tridgell <tridge@samba.org> |
| * Copyright (C) 2000, 2001, 2002 by Martin Pool <mbp@samba.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "rsync.h" |
| #include "popt.h" |
| |
| extern int module_id; |
| extern int sanitize_paths; |
| extern struct filter_list_struct filter_list; |
| extern struct filter_list_struct server_filter_list; |
| |
| int make_backups = 0; |
| |
| /** |
| * If 1, send the whole file as literal data rather than trying to |
| * create an incremental diff. |
| * |
| * If -1, then look at whether we're local or remote and go by that. |
| * |
| * @sa disable_deltas_p() |
| **/ |
| int whole_file = -1; |
| |
| int archive_mode = 0; |
| int keep_dirlinks = 0; |
| int copy_links = 0; |
| int preserve_links = 0; |
| int preserve_hard_links = 0; |
| int preserve_perms = 0; |
| int preserve_devices = 0; |
| int preserve_uid = 0; |
| int preserve_gid = 0; |
| int preserve_times = 0; |
| int omit_dir_times = 0; |
| int update_only = 0; |
| int cvs_exclude = 0; |
| int dry_run = 0; |
| int do_xfers = 1; |
| int ignore_times = 0; |
| int delete_mode = 0; |
| int delete_during = 0; |
| int delete_before = 0; |
| int delete_after = 0; |
| int delete_excluded = 0; |
| int remove_sent_files = 0; |
| int one_file_system = 0; |
| int protocol_version = PROTOCOL_VERSION; |
| int sparse_files = 0; |
| int do_compression = 0; |
| int am_root = 0; |
| int am_server = 0; |
| int am_sender = 0; |
| int am_generator = 0; |
| int am_starting_up = 1; |
| int orig_umask = 0; |
| int relative_paths = -1; |
| int implied_dirs = 1; |
| int numeric_ids = 0; |
| int force_delete = 0; |
| int io_timeout = 0; |
| int allowed_lull = 0; |
| char *files_from = NULL; |
| int filesfrom_fd = -1; |
| char *filesfrom_host = NULL; |
| int eol_nulls = 0; |
| int recurse = 0; |
| int xfer_dirs = 0; |
| int am_daemon = 0; |
| int daemon_over_rsh = 0; |
| int do_stats = 0; |
| int do_progress = 0; |
| int keep_partial = 0; |
| int safe_symlinks = 0; |
| int copy_unsafe_links = 0; |
| int size_only = 0; |
| int daemon_bwlimit = 0; |
| int bwlimit = 0; |
| int fuzzy_basis = 0; |
| size_t bwlimit_writemax = 0; |
| int only_existing = 0; |
| int opt_ignore_existing = 0; |
| int need_messages_from_generator = 0; |
| int max_delete = 0; |
| OFF_T max_size = 0; |
| int ignore_errors = 0; |
| int modify_window = 0; |
| int blocking_io = -1; |
| int checksum_seed = 0; |
| int inplace = 0; |
| int delay_updates = 0; |
| long block_size = 0; /* "long" because popt can't set an int32. */ |
| |
| |
| /** Network address family. **/ |
| #ifdef INET6 |
| int default_af_hint = 0; /* Any protocol */ |
| #else |
| int default_af_hint = AF_INET; /* Must use IPv4 */ |
| #endif |
| |
| /** Do not go into the background when run as --daemon. Good |
| * for debugging and required for running as a service on W32, |
| * or under Unix process-monitors. **/ |
| int no_detach |
| #if defined _WIN32 || defined __WIN32__ |
| = 1; |
| #else |
| = 0; |
| #endif |
| |
| int write_batch = 0; |
| int read_batch = 0; |
| int backup_dir_len = 0; |
| int backup_suffix_len; |
| unsigned int backup_dir_remainder; |
| |
| char *backup_suffix = NULL; |
| char *tmpdir = NULL; |
| char *partial_dir = NULL; |
| char *basis_dir[MAX_BASIS_DIRS+1]; |
| char *config_file = NULL; |
| char *shell_cmd = NULL; |
| char *log_format = NULL; |
| char *password_file = NULL; |
| char *rsync_path = RSYNC_PATH; |
| char *backup_dir = NULL; |
| char backup_dir_buf[MAXPATHLEN]; |
| int rsync_port = 0; |
| int compare_dest = 0; |
| int copy_dest = 0; |
| int link_dest = 0; |
| int basis_dir_cnt = 0; |
| char *dest_option = NULL; |
| |
| int verbose = 0; |
| int quiet = 0; |
| int log_before_transfer = 0; |
| int log_format_has_i = 0; |
| int log_format_has_o_or_i = 0; |
| int always_checksum = 0; |
| int list_only = 0; |
| |
| #define MAX_BATCH_NAME_LEN 256 /* Must be less than MAXPATHLEN-13 */ |
| char *batch_name = NULL; |
| |
| static int daemon_opt; /* sets am_daemon after option error-reporting */ |
| static int F_option_cnt = 0; |
| static int modify_window_set; |
| static int itemize_changes = 0; |
| static int refused_delete, refused_archive_part; |
| static int refused_partial, refused_progress, refused_delete_before; |
| static char *max_size_arg; |
| static char partialdir_for_delayupdate[] = ".~tmp~"; |
| |
| /** Local address to bind. As a character string because it's |
| * interpreted by the IPv6 layer: should be a numeric IP4 or IP6 |
| * address, or a hostname. **/ |
| char *bind_address; |
| |
| |
| static void print_rsync_version(enum logcode f) |
| { |
| char const *got_socketpair = "no "; |
| char const *have_inplace = "no "; |
| char const *hardlinks = "no "; |
| char const *links = "no "; |
| char const *ipv6 = "no "; |
| STRUCT_STAT *dumstat; |
| |
| #ifdef HAVE_SOCKETPAIR |
| got_socketpair = ""; |
| #endif |
| |
| #ifdef HAVE_FTRUNCATE |
| have_inplace = ""; |
| #endif |
| |
| #ifdef SUPPORT_HARD_LINKS |
| hardlinks = ""; |
| #endif |
| |
| #ifdef SUPPORT_LINKS |
| links = ""; |
| #endif |
| |
| #ifdef INET6 |
| ipv6 = ""; |
| #endif |
| |
| rprintf(f, "%s version %s protocol version %d\n", |
| RSYNC_NAME, RSYNC_VERSION, PROTOCOL_VERSION); |
| rprintf(f, |
| "Copyright (C) 1996-2005 by Andrew Tridgell and others\n"); |
| rprintf(f, "<http://rsync.samba.org/>\n"); |
| rprintf(f, "Capabilities: %d-bit files, %ssocketpairs, " |
| "%shard links, %ssymlinks, batchfiles, \n", |
| (int) (sizeof (OFF_T) * 8), |
| got_socketpair, hardlinks, links); |
| |
| /* Note that this field may not have type ino_t. It depends |
| * on the complicated interaction between largefile feature |
| * macros. */ |
| rprintf(f, " %sinplace, %sIPv6, %d-bit system inums, %d-bit internal inums\n", |
| have_inplace, ipv6, |
| (int) (sizeof dumstat->st_ino * 8), |
| (int) (sizeof (int64) * 8)); |
| #ifdef MAINTAINER_MODE |
| rprintf(f, " panic action: \"%s\"\n", |
| get_panic_action()); |
| #endif |
| |
| #if SIZEOF_INT64 < 8 |
| rprintf(f, "WARNING: no 64-bit integers on this platform!\n"); |
| #endif |
| if (sizeof (int64) != SIZEOF_INT64) { |
| rprintf(f, |
| "WARNING: size mismatch in SIZEOF_INT64 define (%d != %d)\n", |
| (int) SIZEOF_INT64, (int) sizeof (int64)); |
| } |
| |
| rprintf(f, |
| "\n" |
| "rsync comes with ABSOLUTELY NO WARRANTY. This is free software, and you\n" |
| "are welcome to redistribute it under certain conditions. See the GNU\n" |
| "General Public Licence for details.\n" |
| ); |
| } |
| |
| |
| void usage(enum logcode F) |
| { |
| print_rsync_version(F); |
| |
| rprintf(F,"\nrsync is a file transfer program capable of efficient remote update\nvia a fast differencing algorithm.\n\n"); |
| |
| rprintf(F,"Usage: rsync [OPTION]... SRC [SRC]... [USER@]HOST:DEST\n"); |
| rprintf(F," or rsync [OPTION]... [USER@]HOST:SRC [DEST]\n"); |
| rprintf(F," or rsync [OPTION]... SRC [SRC]... DEST\n"); |
| rprintf(F," or rsync [OPTION]... [USER@]HOST::SRC [DEST]\n"); |
| rprintf(F," or rsync [OPTION]... SRC [SRC]... [USER@]HOST::DEST\n"); |
| rprintf(F," or rsync [OPTION]... rsync://[USER@]HOST[:PORT]/SRC [DEST]\n"); |
| rprintf(F," or rsync [OPTION]... SRC [SRC]... rsync://[USER@]HOST[:PORT]/DEST\n"); |
| rprintf(F,"SRC on single-colon remote HOST will be expanded by remote shell\n"); |
| rprintf(F,"SRC on server remote HOST may contain shell wildcards or multiple\n"); |
| rprintf(F," sources separated by space as long as they have same top-level\n"); |
| rprintf(F,"\nOptions\n"); |
| rprintf(F," -v, --verbose increase verbosity\n"); |
| rprintf(F," -q, --quiet suppress non-error messages\n"); |
| rprintf(F," -c, --checksum skip based on checksum, not mod-time & size\n"); |
| rprintf(F," -a, --archive archive mode; same as -rlptgoD (no -H)\n"); |
| rprintf(F," -r, --recursive recurse into directories\n"); |
| rprintf(F," -R, --relative use relative path names\n"); |
| rprintf(F," --no-relative turn off --relative\n"); |
| rprintf(F," --no-implied-dirs don't send implied dirs with -R\n"); |
| rprintf(F," -b, --backup make backups (see --suffix & --backup-dir)\n"); |
| rprintf(F," --backup-dir=DIR make backups into hierarchy based in DIR\n"); |
| rprintf(F," --suffix=SUFFIX set backup suffix (default %s w/o --backup-dir)\n",BACKUP_SUFFIX); |
| rprintf(F," -u, --update skip files that are newer on the receiver\n"); |
| rprintf(F," --inplace update destination files in-place (SEE MAN PAGE)\n"); |
| rprintf(F," -d, --dirs transfer directories without recursing\n"); |
| rprintf(F," -l, --links copy symlinks as symlinks\n"); |
| rprintf(F," -L, --copy-links transform symlink into referent file/dir\n"); |
| rprintf(F," --copy-unsafe-links only \"unsafe\" symlinks are transformed\n"); |
| rprintf(F," --safe-links ignore symlinks that point outside the source tree\n"); |
| rprintf(F," -H, --hard-links preserve hard links\n"); |
| rprintf(F," -K, --keep-dirlinks treat symlinked dir on receiver as dir\n"); |
| rprintf(F," -p, --perms preserve permissions\n"); |
| rprintf(F," -o, --owner preserve owner (root only)\n"); |
| rprintf(F," -g, --group preserve group\n"); |
| rprintf(F," -D, --devices preserve devices (root only)\n"); |
| rprintf(F," -t, --times preserve times\n"); |
| rprintf(F," -O, --omit-dir-times omit directories when preserving times\n"); |
| rprintf(F," -S, --sparse handle sparse files efficiently\n"); |
| rprintf(F," -n, --dry-run show what would have been transferred\n"); |
| rprintf(F," -W, --whole-file copy files whole (without rsync algorithm)\n"); |
| rprintf(F," --no-whole-file always use incremental rsync algorithm\n"); |
| rprintf(F," -x, --one-file-system don't cross filesystem boundaries\n"); |
| rprintf(F," -B, --block-size=SIZE force a fixed checksum block-size\n"); |
| rprintf(F," -e, --rsh=COMMAND specify the remote shell to use\n"); |
| rprintf(F," --rsync-path=PROGRAM specify the rsync to run on the remote machine\n"); |
| rprintf(F," --existing only update files that already exist on receiver\n"); |
| rprintf(F," --ignore-existing ignore files that already exist on receiving side\n"); |
| rprintf(F," --remove-sent-files sent files/symlinks are removed from sending side\n"); |
| rprintf(F," --del an alias for --delete-during\n"); |
| rprintf(F," --delete delete files that don't exist on the sending side\n"); |
| rprintf(F," --delete-before receiver deletes before transfer (default)\n"); |
| rprintf(F," --delete-during receiver deletes during transfer, not before\n"); |
| rprintf(F," --delete-after receiver deletes after transfer, not before\n"); |
| rprintf(F," --delete-excluded also delete excluded files on the receiving side\n"); |
| rprintf(F," --ignore-errors delete even if there are I/O errors\n"); |
| rprintf(F," --force force deletion of directories even if not empty\n"); |
| rprintf(F," --max-delete=NUM don't delete more than NUM files\n"); |
| rprintf(F," --max-size=SIZE don't transfer any file larger than SIZE\n"); |
| rprintf(F," --partial keep partially transferred files\n"); |
| rprintf(F," --partial-dir=DIR put a partially transferred file into DIR\n"); |
| rprintf(F," --delay-updates put all updated files into place at transfer's end\n"); |
| rprintf(F," --numeric-ids don't map uid/gid values by user/group name\n"); |
| rprintf(F," --timeout=TIME set I/O timeout in seconds\n"); |
| rprintf(F," -I, --ignore-times don't skip files that match in size and mod-time\n"); |
| rprintf(F," --size-only skip files that match in size\n"); |
| rprintf(F," --modify-window=NUM compare mod-times with reduced accuracy\n"); |
| rprintf(F," -T, --temp-dir=DIR create temporary files in directory DIR\n"); |
| rprintf(F," -y, --fuzzy find similar file for basis if no dest file\n"); |
| rprintf(F," --compare-dest=DIR also compare destination files relative to DIR\n"); |
| rprintf(F," --copy-dest=DIR ... and include copies of unchanged files\n"); |
| rprintf(F," --link-dest=DIR hardlink to files in DIR when unchanged\n"); |
| rprintf(F," -z, --compress compress file data during the transfer\n"); |
| rprintf(F," -C, --cvs-exclude auto-ignore files the same way CVS does\n"); |
| rprintf(F," -f, --filter=RULE add a file-filtering RULE\n"); |
| rprintf(F," -F same as --filter='dir-merge /.rsync-filter'\n"); |
| rprintf(F," repeated: --filter='- .rsync-filter'\n"); |
| rprintf(F," --exclude=PATTERN exclude files matching PATTERN\n"); |
| rprintf(F," --exclude-from=FILE read exclude patterns from FILE\n"); |
| rprintf(F," --include=PATTERN don't exclude files matching PATTERN\n"); |
| rprintf(F," --include-from=FILE read include patterns from FILE\n"); |
| rprintf(F," --files-from=FILE read list of source-file names from FILE\n"); |
| rprintf(F," -0, --from0 all *-from/filter files are delimited by 0s\n"); |
| rprintf(F," --address=ADDRESS bind address for outgoing socket to daemon\n"); |
| rprintf(F," --port=PORT specify double-colon alternate port number\n"); |
| rprintf(F," --blocking-io use blocking I/O for the remote shell\n"); |
| rprintf(F," --no-blocking-io turn off blocking I/O when it is the default\n"); |
| rprintf(F," --stats give some file-transfer stats\n"); |
| rprintf(F," --progress show progress during transfer\n"); |
| rprintf(F," -P same as --partial --progress\n"); |
| rprintf(F," -i, --itemize-changes output a change-summary for all updates\n"); |
| rprintf(F," --log-format=FORMAT output filenames using the specified format\n"); |
| rprintf(F," --password-file=FILE read password from FILE\n"); |
| rprintf(F," --list-only list the files instead of copying them\n"); |
| rprintf(F," --bwlimit=KBPS limit I/O bandwidth; KBytes per second\n"); |
| rprintf(F," --write-batch=FILE write a batched update to FILE\n"); |
| rprintf(F," --only-write-batch=FILE like --write-batch but w/o updating destination\n"); |
| rprintf(F," --read-batch=FILE read a batched update from FILE\n"); |
| rprintf(F," --protocol=NUM force an older protocol version to be used\n"); |
| #ifdef INET6 |
| rprintf(F," -4, --ipv4 prefer IPv4\n"); |
| rprintf(F," -6, --ipv6 prefer IPv6\n"); |
| #endif |
| rprintf(F," --version print version number\n"); |
| rprintf(F," -h, --help show this help screen\n"); |
| |
| rprintf(F,"\nUse \"rsync --daemon --help\" to see the daemon-mode command-line options.\n"); |
| rprintf(F,"Please see the rsync(1) and rsyncd.conf(5) man pages for full documentation.\n"); |
| rprintf(F,"See http://rsync.samba.org/ for updates, bug reports, and answers\n"); |
| } |
| |
| enum {OPT_VERSION = 1000, OPT_DAEMON, OPT_SENDER, OPT_EXCLUDE, OPT_EXCLUDE_FROM, |
| OPT_FILTER, OPT_COMPARE_DEST, OPT_COPY_DEST, OPT_LINK_DEST, |
| OPT_INCLUDE, OPT_INCLUDE_FROM, OPT_MODIFY_WINDOW, |
| OPT_READ_BATCH, OPT_WRITE_BATCH, OPT_ONLY_WRITE_BATCH, OPT_MAX_SIZE, |
| OPT_REFUSED_BASE = 9000}; |
| |
| static struct poptOption long_options[] = { |
| /* longName, shortName, argInfo, argPtr, value, descrip, argDesc */ |
| {"version", 0, POPT_ARG_NONE, 0, OPT_VERSION, 0, 0}, |
| {"suffix", 0, POPT_ARG_STRING, &backup_suffix, 0, 0, 0 }, |
| {"rsync-path", 0, POPT_ARG_STRING, &rsync_path, 0, 0, 0 }, |
| {"password-file", 0, POPT_ARG_STRING, &password_file, 0, 0, 0 }, |
| {"ignore-times", 'I', POPT_ARG_NONE, &ignore_times, 0, 0, 0 }, |
| {"size-only", 0, POPT_ARG_NONE, &size_only, 0, 0, 0 }, |
| {"modify-window", 0, POPT_ARG_INT, &modify_window, OPT_MODIFY_WINDOW, 0, 0 }, |
| {"one-file-system", 'x', POPT_ARG_NONE, &one_file_system, 0, 0, 0 }, |
| {"existing", 0, POPT_ARG_NONE, &only_existing, 0, 0, 0 }, |
| {"ignore-existing", 0, POPT_ARG_NONE, &opt_ignore_existing, 0, 0, 0 }, |
| {"del", 0, POPT_ARG_NONE, &delete_during, 0, 0, 0 }, |
| {"delete", 0, POPT_ARG_NONE, &delete_mode, 0, 0, 0 }, |
| {"delete-before", 0, POPT_ARG_VAL, &delete_before, 2, 0, 0 }, |
| {"delete-during", 0, POPT_ARG_NONE, &delete_during, 0, 0, 0 }, |
| {"delete-after", 0, POPT_ARG_NONE, &delete_after, 0, 0, 0 }, |
| {"delete-excluded", 0, POPT_ARG_NONE, &delete_excluded, 0, 0, 0 }, |
| {"remove-sent-files",0, POPT_ARG_NONE, &remove_sent_files, 0, 0, 0 }, |
| {"force", 0, POPT_ARG_NONE, &force_delete, 0, 0, 0 }, |
| {"numeric-ids", 0, POPT_ARG_NONE, &numeric_ids, 0, 0, 0 }, |
| {"filter", 'f', POPT_ARG_STRING, 0, OPT_FILTER, 0, 0 }, |
| {"exclude", 0, POPT_ARG_STRING, 0, OPT_EXCLUDE, 0, 0 }, |
| {"include", 0, POPT_ARG_STRING, 0, OPT_INCLUDE, 0, 0 }, |
| {"exclude-from", 0, POPT_ARG_STRING, 0, OPT_EXCLUDE_FROM, 0, 0 }, |
| {"include-from", 0, POPT_ARG_STRING, 0, OPT_INCLUDE_FROM, 0, 0 }, |
| {"safe-links", 0, POPT_ARG_NONE, &safe_symlinks, 0, 0, 0 }, |
| {"help", 'h', POPT_ARG_NONE, 0, 'h', 0, 0 }, |
| {"backup", 'b', POPT_ARG_NONE, &make_backups, 0, 0, 0 }, |
| {"dry-run", 'n', POPT_ARG_NONE, &dry_run, 0, 0, 0 }, |
| {"sparse", 'S', POPT_ARG_NONE, &sparse_files, 0, 0, 0 }, |
| {"cvs-exclude", 'C', POPT_ARG_NONE, &cvs_exclude, 0, 0, 0 }, |
| {"update", 'u', POPT_ARG_NONE, &update_only, 0, 0, 0 }, |
| {"inplace", 0, POPT_ARG_NONE, &inplace, 0, 0, 0 }, |
| {"dirs", 'd', POPT_ARG_VAL, &xfer_dirs, 2, 0, 0 }, |
| {"links", 'l', POPT_ARG_NONE, &preserve_links, 0, 0, 0 }, |
| {"copy-links", 'L', POPT_ARG_NONE, ©_links, 0, 0, 0 }, |
| {"keep-dirlinks", 'K', POPT_ARG_NONE, &keep_dirlinks, 0, 0, 0 }, |
| {"whole-file", 'W', POPT_ARG_VAL, &whole_file, 1, 0, 0 }, |
| {"no-whole-file", 0, POPT_ARG_VAL, &whole_file, 0, 0, 0 }, |
| {"copy-unsafe-links",0, POPT_ARG_NONE, ©_unsafe_links, 0, 0, 0 }, |
| {"perms", 'p', POPT_ARG_NONE, &preserve_perms, 0, 0, 0 }, |
| {"owner", 'o', POPT_ARG_NONE, &preserve_uid, 0, 0, 0 }, |
| {"group", 'g', POPT_ARG_NONE, &preserve_gid, 0, 0, 0 }, |
| {"devices", 'D', POPT_ARG_NONE, &preserve_devices, 0, 0, 0 }, |
| {"times", 't', POPT_ARG_NONE, &preserve_times, 0, 0, 0 }, |
| {"omit-dir-times", 'O', POPT_ARG_VAL, &omit_dir_times, 2, 0, 0 }, |
| {"checksum", 'c', POPT_ARG_NONE, &always_checksum, 0, 0, 0 }, |
| {"verbose", 'v', POPT_ARG_NONE, 0, 'v', 0, 0 }, |
| {"quiet", 'q', POPT_ARG_NONE, 0, 'q', 0, 0 }, |
| {"archive", 'a', POPT_ARG_NONE, &archive_mode, 0, 0, 0 }, |
| {"server", 0, POPT_ARG_NONE, &am_server, 0, 0, 0 }, |
| {"sender", 0, POPT_ARG_NONE, 0, OPT_SENDER, 0, 0 }, |
| {"recursive", 'r', POPT_ARG_NONE, &recurse, 0, 0, 0 }, |
| {"list-only", 0, POPT_ARG_VAL, &list_only, 2, 0, 0 }, |
| {"relative", 'R', POPT_ARG_VAL, &relative_paths, 1, 0, 0 }, |
| {"no-relative", 0, POPT_ARG_VAL, &relative_paths, 0, 0, 0 }, |
| {"rsh", 'e', POPT_ARG_STRING, &shell_cmd, 0, 0, 0 }, |
| {"block-size", 'B', POPT_ARG_LONG, &block_size, 0, 0, 0 }, |
| {"max-delete", 0, POPT_ARG_INT, &max_delete, 0, 0, 0 }, |
| {"max-size", 0, POPT_ARG_STRING, &max_size_arg, OPT_MAX_SIZE, 0, 0 }, |
| {"timeout", 0, POPT_ARG_INT, &io_timeout, 0, 0, 0 }, |
| {"temp-dir", 'T', POPT_ARG_STRING, &tmpdir, 0, 0, 0 }, |
| {"compare-dest", 0, POPT_ARG_STRING, 0, OPT_COMPARE_DEST, 0, 0 }, |
| {"copy-dest", 0, POPT_ARG_STRING, 0, OPT_COPY_DEST, 0, 0 }, |
| {"link-dest", 0, POPT_ARG_STRING, 0, OPT_LINK_DEST, 0, 0 }, |
| {"fuzzy", 'y', POPT_ARG_NONE, &fuzzy_basis, 0, 0, 0 }, |
| /* TODO: Should this take an optional int giving the compression level? */ |
| {"compress", 'z', POPT_ARG_NONE, &do_compression, 0, 0, 0 }, |
| {"stats", 0, POPT_ARG_NONE, &do_stats, 0, 0, 0 }, |
| {"progress", 0, POPT_ARG_NONE, &do_progress, 0, 0, 0 }, |
| {"partial", 0, POPT_ARG_NONE, &keep_partial, 0, 0, 0 }, |
| {"partial-dir", 0, POPT_ARG_STRING, &partial_dir, 0, 0, 0 }, |
| {"delay-updates", 0, POPT_ARG_NONE, &delay_updates, 0, 0, 0 }, |
| {"ignore-errors", 0, POPT_ARG_NONE, &ignore_errors, 0, 0, 0 }, |
| {"blocking-io", 0, POPT_ARG_VAL, &blocking_io, 1, 0, 0 }, |
| {"no-blocking-io", 0, POPT_ARG_VAL, &blocking_io, 0, 0, 0 }, |
| {0, 'F', POPT_ARG_NONE, 0, 'F', 0, 0 }, |
| {0, 'P', POPT_ARG_NONE, 0, 'P', 0, 0 }, |
| {"address", 0, POPT_ARG_STRING, &bind_address, 0, 0, 0 }, |
| {"port", 0, POPT_ARG_INT, &rsync_port, 0, 0, 0 }, |
| {"log-format", 0, POPT_ARG_STRING, &log_format, 0, 0, 0 }, |
| {"itemize-changes", 'i', POPT_ARG_NONE, &itemize_changes, 0, 0, 0 }, |
| {"bwlimit", 0, POPT_ARG_INT, &bwlimit, 0, 0, 0 }, |
| {"backup-dir", 0, POPT_ARG_STRING, &backup_dir, 0, 0, 0 }, |
| {"hard-links", 'H', POPT_ARG_NONE, &preserve_hard_links, 0, 0, 0 }, |
| {"read-batch", 0, POPT_ARG_STRING, &batch_name, OPT_READ_BATCH, 0, 0 }, |
| {"write-batch", 0, POPT_ARG_STRING, &batch_name, OPT_WRITE_BATCH, 0, 0 }, |
| {"only-write-batch", 0, POPT_ARG_STRING, &batch_name, OPT_ONLY_WRITE_BATCH, 0, 0 }, |
| {"files-from", 0, POPT_ARG_STRING, &files_from, 0, 0, 0 }, |
| {"from0", '0', POPT_ARG_NONE, &eol_nulls, 0, 0, 0}, |
| {"no-implied-dirs", 0, POPT_ARG_VAL, &implied_dirs, 0, 0, 0 }, |
| {"protocol", 0, POPT_ARG_INT, &protocol_version, 0, 0, 0 }, |
| {"checksum-seed", 0, POPT_ARG_INT, &checksum_seed, 0, 0, 0 }, |
| #ifdef INET6 |
| {"ipv4", '4', POPT_ARG_VAL, &default_af_hint, AF_INET, 0, 0 }, |
| {"ipv6", '6', POPT_ARG_VAL, &default_af_hint, AF_INET6, 0, 0 }, |
| #endif |
| /* All these options switch us into daemon-mode option-parsing. */ |
| {"config", 0, POPT_ARG_STRING, 0, OPT_DAEMON, 0, 0 }, |
| {"daemon", 0, POPT_ARG_NONE, 0, OPT_DAEMON, 0, 0 }, |
| {"detach", 0, POPT_ARG_NONE, 0, OPT_DAEMON, 0, 0 }, |
| {"no-detach", 0, POPT_ARG_NONE, 0, OPT_DAEMON, 0, 0 }, |
| {0,0,0,0, 0, 0, 0} |
| }; |
| |
| static void daemon_usage(enum logcode F) |
| { |
| print_rsync_version(F); |
| |
| rprintf(F,"\nUsage: rsync --daemon [OPTION]...\n"); |
| rprintf(F," --address=ADDRESS bind to the specified address\n"); |
| rprintf(F," --bwlimit=KBPS limit I/O bandwidth; KBytes per second\n"); |
| rprintf(F," --config=FILE specify alternate rsyncd.conf file\n"); |
| rprintf(F," --no-detach do not detach from the parent\n"); |
| rprintf(F," --port=PORT listen on alternate port number\n"); |
| rprintf(F," -v, --verbose increase verbosity\n"); |
| #ifdef INET6 |
| rprintf(F," -4, --ipv4 prefer IPv4\n"); |
| rprintf(F," -6, --ipv6 prefer IPv6\n"); |
| #endif |
| rprintf(F," -h, --help show this help screen\n"); |
| |
| rprintf(F,"\nIf you were not trying to invoke rsync as a daemon, avoid using any of the\n"); |
| rprintf(F,"daemon-specific rsync options. See also the rsyncd.conf(5) man page.\n"); |
| } |
| |
| static struct poptOption long_daemon_options[] = { |
| /* longName, shortName, argInfo, argPtr, value, descrip, argDesc */ |
| {"address", 0, POPT_ARG_STRING, &bind_address, 0, 0, 0 }, |
| {"bwlimit", 0, POPT_ARG_INT, &daemon_bwlimit, 0, 0, 0 }, |
| {"config", 0, POPT_ARG_STRING, &config_file, 0, 0, 0 }, |
| {"daemon", 0, POPT_ARG_NONE, &daemon_opt, 0, 0, 0 }, |
| #ifdef INET6 |
| {"ipv4", '4', POPT_ARG_VAL, &default_af_hint, AF_INET, 0, 0 }, |
| {"ipv6", '6', POPT_ARG_VAL, &default_af_hint, AF_INET6, 0, 0 }, |
| #endif |
| {"detach", 0, POPT_ARG_VAL, &no_detach, 0, 0, 0 }, |
| {"no-detach", 0, POPT_ARG_VAL, &no_detach, 1, 0, 0 }, |
| {"port", 0, POPT_ARG_INT, &rsync_port, 0, 0, 0 }, |
| {"protocol", 0, POPT_ARG_INT, &protocol_version, 0, 0, 0 }, |
| {"server", 0, POPT_ARG_NONE, &am_server, 0, 0, 0 }, |
| {"verbose", 'v', POPT_ARG_NONE, 0, 'v', 0, 0 }, |
| {"help", 'h', POPT_ARG_NONE, 0, 'h', 0, 0 }, |
| {0,0,0,0, 0, 0, 0} |
| }; |
| |
| |
| static char err_buf[200]; |
| |
| |
| /** |
| * Store the option error message, if any, so that we can log the |
| * connection attempt (which requires parsing the options), and then |
| * show the error later on. |
| **/ |
| void option_error(void) |
| { |
| if (!err_buf[0]) { |
| strcpy(err_buf, "Error parsing options: " |
| "option may be supported on client but not on server?\n"); |
| } |
| |
| rprintf(FERROR, RSYNC_NAME ": %s", err_buf); |
| } |
| |
| |
| /** |
| * Tweak the option table to disable all options that the rsyncd.conf |
| * file has told us to refuse. |
| **/ |
| static void set_refuse_options(char *bp) |
| { |
| struct poptOption *op; |
| char *cp, shortname[2]; |
| int is_wild, found_match; |
| |
| shortname[1] = '\0'; |
| |
| while (1) { |
| while (*bp == ' ') bp++; |
| if (!*bp) |
| break; |
| if ((cp = strchr(bp, ' ')) != NULL) |
| *cp= '\0'; |
| is_wild = strpbrk(bp, "*?[") != NULL; |
| found_match = 0; |
| for (op = long_options; ; op++) { |
| *shortname = op->shortName; |
| if (!op->longName && !*shortname) |
| break; |
| if ((op->longName && wildmatch(bp, op->longName)) |
| || (*shortname && wildmatch(bp, shortname))) { |
| if (op->argInfo == POPT_ARG_VAL) |
| op->argInfo = POPT_ARG_NONE; |
| op->val = (op - long_options) + OPT_REFUSED_BASE; |
| found_match = 1; |
| /* These flags are set to let us easily check |
| * an implied option later in the code. */ |
| switch (*shortname) { |
| case 'r': case 'd': case 'l': case 'p': |
| case 't': case 'g': case 'o': case 'D': |
| refused_archive_part = op->val; |
| break; |
| case '\0': |
| if (wildmatch("delete", op->longName)) |
| refused_delete = op->val; |
| else if (wildmatch("delete-before", op->longName)) |
| refused_delete_before = op->val; |
| else if (wildmatch("partial", op->longName)) |
| refused_partial = op->val; |
| else if (wildmatch("progress", op->longName)) |
| refused_progress = op->val; |
| break; |
| } |
| if (!is_wild) |
| break; |
| } |
| } |
| if (!found_match) { |
| rprintf(FLOG, "No match for refuse-options string \"%s\"\n", |
| bp); |
| } |
| if (!cp) |
| break; |
| *cp = ' '; |
| bp = cp + 1; |
| } |
| |
| for (op = long_options; ; op++) { |
| *shortname = op->shortName; |
| if (!op->longName && !*shortname) |
| break; |
| if (op->val == OPT_DAEMON) { |
| if (op->argInfo == POPT_ARG_VAL) |
| op->argInfo = POPT_ARG_NONE; |
| op->val = (op - long_options) + OPT_REFUSED_BASE; |
| } |
| } |
| } |
| |
| |
| static int count_args(const char **argv) |
| { |
| int i = 0; |
| |
| if (argv) { |
| while (argv[i] != NULL) |
| i++; |
| } |
| |
| return i; |
| } |
| |
| |
| static OFF_T parse_size_arg(const char *size_arg) |
| { |
| const char *arg; |
| OFF_T size; |
| |
| for (arg = size_arg; isdigit(*(uchar*)arg); arg++) {} |
| if (*arg == '.') |
| for (arg++; isdigit(*(uchar*)arg); arg++) {} |
| switch (*arg) { |
| case 'k': case 'K': |
| size = atof(size_arg) * 1024; |
| break; |
| case 'm': case 'M': |
| size = atof(size_arg) * 1024*1024; |
| break; |
| case 'g': case 'G': |
| size = atof(size_arg) * 1024*1024*1024; |
| break; |
| case '\0': |
| size = atof(size_arg); |
| break; |
| default: |
| size = 0; |
| break; |
| } |
| return size; |
| } |
| |
| |
| static void create_refuse_error(int which) |
| { |
| /* The "which" value is the index + OPT_REFUSED_BASE. */ |
| struct poptOption *op = &long_options[which - OPT_REFUSED_BASE]; |
| int n = snprintf(err_buf, sizeof err_buf, |
| "The server is configured to refuse --%s\n", |
| op->longName) - 1; |
| if (op->shortName) { |
| snprintf(err_buf + n, sizeof err_buf - n, |
| " (-%c)\n", op->shortName); |
| } |
| } |
| |
| |
| /** |
| * Process command line arguments. Called on both local and remote. |
| * |
| * @retval 1 if all options are OK; with globals set to appropriate |
| * values |
| * |
| * @retval 0 on error, with err_buf containing an explanation |
| **/ |
| int parse_arguments(int *argc, const char ***argv, int frommain) |
| { |
| int opt; |
| char *ref = lp_refuse_options(module_id); |
| const char *arg; |
| poptContext pc; |
| |
| if (ref && *ref) |
| set_refuse_options(ref); |
| |
| /* TODO: Call poptReadDefaultConfig; handle errors. */ |
| |
| /* The context leaks in case of an error, but if there's a |
| * problem we always exit anyhow. */ |
| pc = poptGetContext(RSYNC_NAME, *argc, *argv, long_options, 0); |
| poptReadDefaultConfig(pc, 0); |
| |
| while ((opt = poptGetNextOpt(pc)) != -1) { |
| /* most options are handled automatically by popt; |
| * only special cases are returned and listed here. */ |
| |
| switch (opt) { |
| case OPT_VERSION: |
| print_rsync_version(FINFO); |
| exit_cleanup(0); |
| |
| case OPT_DAEMON: |
| if (am_daemon) { |
| strcpy(err_buf, "Attempt to hack rsync thwarted!\n"); |
| return 0; |
| } |
| poptFreeContext(pc); |
| pc = poptGetContext(RSYNC_NAME, *argc, *argv, |
| long_daemon_options, 0); |
| while ((opt = poptGetNextOpt(pc)) != -1) { |
| switch (opt) { |
| case 'h': |
| daemon_usage(FINFO); |
| exit_cleanup(0); |
| |
| case 'v': |
| verbose++; |
| break; |
| |
| default: |
| rprintf(FERROR, |
| "rsync: %s: %s (in daemon mode)\n", |
| poptBadOption(pc, POPT_BADOPTION_NOALIAS), |
| poptStrerror(opt)); |
| goto daemon_error; |
| } |
| } |
| if (!daemon_opt) { |
| rprintf(FERROR, "Daemon option(s) used without --daemon.\n"); |
| daemon_error: |
| rprintf(FERROR, |
| "(Type \"rsync --daemon --help\" for assistance with daemon mode.)\n"); |
| exit_cleanup(RERR_SYNTAX); |
| } |
| *argv = poptGetArgs(pc); |
| *argc = count_args(*argv); |
| am_starting_up = 0; |
| daemon_opt = 0; |
| am_daemon = 1; |
| return 1; |
| |
| case OPT_MODIFY_WINDOW: |
| /* The value has already been set by popt, but |
| * we need to remember that we're using a |
| * non-default setting. */ |
| modify_window_set = 1; |
| break; |
| |
| case OPT_FILTER: |
| parse_rule(&filter_list, poptGetOptArg(pc), 0, 0); |
| break; |
| |
| case OPT_EXCLUDE: |
| parse_rule(&filter_list, poptGetOptArg(pc), |
| 0, XFLG_OLD_PREFIXES); |
| break; |
| |
| case OPT_INCLUDE: |
| parse_rule(&filter_list, poptGetOptArg(pc), |
| MATCHFLG_INCLUDE, XFLG_OLD_PREFIXES); |
| break; |
| |
| case OPT_EXCLUDE_FROM: |
| case OPT_INCLUDE_FROM: |
| arg = poptGetOptArg(pc); |
| if (sanitize_paths) |
| arg = sanitize_path(NULL, arg, NULL, 0); |
| if (server_filter_list.head) { |
| char *cp = (char *)arg; |
| if (!*cp) |
| goto options_rejected; |
| clean_fname(cp, 1); |
| if (check_filter(&server_filter_list, cp, 0) < 0) |
| goto options_rejected; |
| } |
| parse_filter_file(&filter_list, arg, |
| opt == OPT_INCLUDE_FROM ? MATCHFLG_INCLUDE : 0, |
| XFLG_FATAL_ERRORS | XFLG_OLD_PREFIXES); |
| break; |
| |
| case 'h': |
| usage(FINFO); |
| exit_cleanup(0); |
| |
| case 'v': |
| verbose++; |
| break; |
| |
| case 'q': |
| if (frommain) |
| quiet++; |
| break; |
| |
| case OPT_SENDER: |
| if (!am_server) { |
| usage(FERROR); |
| exit_cleanup(RERR_SYNTAX); |
| } |
| am_sender = 1; |
| break; |
| |
| case 'F': |
| switch (++F_option_cnt) { |
| case 1: |
| parse_rule(&filter_list,": /.rsync-filter",0,0); |
| break; |
| case 2: |
| parse_rule(&filter_list,"- .rsync-filter",0,0); |
| break; |
| } |
| break; |
| |
| case 'P': |
| if (refused_partial || refused_progress) { |
| create_refuse_error(refused_partial |
| ? refused_partial : refused_progress); |
| return 0; |
| } |
| do_progress = 1; |
| keep_partial = 1; |
| break; |
| |
| case OPT_WRITE_BATCH: |
| /* batch_name is already set */ |
| write_batch = 1; |
| break; |
| |
| case OPT_ONLY_WRITE_BATCH: |
| /* batch_name is already set */ |
| write_batch = -1; |
| break; |
| |
| case OPT_READ_BATCH: |
| /* batch_name is already set */ |
| read_batch = 1; |
| break; |
| |
| case OPT_MAX_SIZE: |
| if ((max_size = parse_size_arg(max_size_arg)) <= 0) { |
| snprintf(err_buf, sizeof err_buf, |
| "--max-size value is invalid: %s\n", |
| max_size_arg); |
| return 0; |
| } |
| break; |
| |
| case OPT_LINK_DEST: |
| #ifdef HAVE_LINK |
| link_dest = 1; |
| dest_option = "--link-dest"; |
| goto set_dest_dir; |
| #else |
| snprintf(err_buf, sizeof err_buf, |
| "hard links are not supported on this %s\n", |
| am_server ? "server" : "client"); |
| return 0; |
| #endif |
| |
| case OPT_COPY_DEST: |
| copy_dest = 1; |
| dest_option = "--copy-dest"; |
| goto set_dest_dir; |
| |
| case OPT_COMPARE_DEST: |
| compare_dest = 1; |
| dest_option = "--compare-dest"; |
| set_dest_dir: |
| if (basis_dir_cnt >= MAX_BASIS_DIRS) { |
| snprintf(err_buf, sizeof err_buf, |
| "ERROR: at most %d %s args may be specified\n", |
| MAX_BASIS_DIRS, dest_option); |
| return 0; |
| } |
| arg = poptGetOptArg(pc); |
| if (sanitize_paths) |
| arg = sanitize_path(NULL, arg, NULL, 0); |
| basis_dir[basis_dir_cnt++] = (char *)arg; |
| break; |
| |
| default: |
| /* A large opt value means that set_refuse_options() |
| * turned this option off. */ |
| if (opt >= OPT_REFUSED_BASE) { |
| create_refuse_error(opt); |
| return 0; |
| } |
| snprintf(err_buf, sizeof err_buf, "%s%s: %s\n", |
| am_server ? "on remote machine: " : "", |
| poptBadOption(pc, POPT_BADOPTION_NOALIAS), |
| poptStrerror(opt)); |
| return 0; |
| } |
| } |
| |
| #ifndef SUPPORT_LINKS |
| if (preserve_links && !am_sender) { |
| snprintf(err_buf, sizeof err_buf, |
| "symlinks are not supported on this %s\n", |
| am_server ? "server" : "client"); |
| return 0; |
| } |
| #endif |
| |
| #ifndef SUPPORT_HARD_LINKS |
| if (preserve_hard_links) { |
| snprintf(err_buf, sizeof err_buf, |
| "hard links are not supported on this %s\n", |
| am_server ? "server" : "client"); |
| return 0; |
| } |
| #endif |
| |
| if (write_batch && read_batch) { |
| snprintf(err_buf, sizeof err_buf, |
| "--write-batch and --read-batch can not be used together\n"); |
| return 0; |
| } |
| if (write_batch > 0 || read_batch) { |
| if (am_server) { |
| rprintf(FINFO, |
| "ignoring --%s-batch option sent to server\n", |
| write_batch ? "write" : "read"); |
| /* We don't actually exit_cleanup(), so that we can |
| * still service older version clients that still send |
| * batch args to server. */ |
| read_batch = write_batch = 0; |
| batch_name = NULL; |
| } else if (dry_run) |
| write_batch = 0; |
| } |
| if (read_batch && files_from) { |
| snprintf(err_buf, sizeof err_buf, |
| "--read-batch cannot be used with --files-from\n"); |
| return 0; |
| } |
| if (batch_name && strlen(batch_name) > MAX_BATCH_NAME_LEN) { |
| snprintf(err_buf, sizeof err_buf, |
| "the batch-file name must be %d characters or less.\n", |
| MAX_BATCH_NAME_LEN); |
| return 0; |
| } |
| |
| if (tmpdir && strlen(tmpdir) >= MAXPATHLEN - 10) { |
| snprintf(err_buf, sizeof err_buf, |
| "the --temp-dir path is WAY too long.\n"); |
| return 0; |
| } |
| |
| if (compare_dest + copy_dest + link_dest > 1) { |
| snprintf(err_buf, sizeof err_buf, |
| "You may not mix --compare-dest, --copy-dest, and --link-dest.\n"); |
| return 0; |
| } |
| |
| if (archive_mode) { |
| if (refused_archive_part) { |
| create_refuse_error(refused_archive_part); |
| return 0; |
| } |
| if (!files_from) |
| recurse = 1; |
| #ifdef SUPPORT_LINKS |
| preserve_links = 1; |
| #endif |
| preserve_perms = 1; |
| preserve_times = 1; |
| preserve_gid = 1; |
| preserve_uid = 1; |
| preserve_devices = 1; |
| } |
| |
| if (recurse || list_only || files_from) |
| xfer_dirs |= 1; |
| |
| if (relative_paths < 0) |
| relative_paths = files_from? 1 : 0; |
| |
| if (!!delete_before + delete_during + delete_after > 1) { |
| snprintf(err_buf, sizeof err_buf, |
| "You may not combine multiple --delete-WHEN options.\n"); |
| return 0; |
| } |
| if (!recurse) { |
| delete_before = delete_during = delete_after = 0; |
| delete_mode = delete_excluded = 0; |
| } else if (delete_before || delete_during || delete_after) |
| delete_mode = 1; |
| else if (delete_mode || delete_excluded) { |
| if (refused_delete_before) { |
| create_refuse_error(refused_delete_before); |
| return 0; |
| } |
| delete_mode = delete_before = 1; |
| } |
| |
| if (delete_mode && refused_delete) { |
| create_refuse_error(refused_delete); |
| return 0; |
| } |
| |
| if (remove_sent_files) { |
| /* We only want to infer this refusal of --remove-sent-files |
| * via the refusal of "delete", not any of the "delete-FOO" |
| * options. */ |
| if (refused_delete && am_sender) { |
| create_refuse_error(refused_delete); |
| return 0; |
| } |
| need_messages_from_generator = 1; |
| } |
| |
| *argv = poptGetArgs(pc); |
| *argc = count_args(*argv); |
| |
| if (sanitize_paths) { |
| int i; |
| for (i = *argc; i-- > 0; ) |
| (*argv)[i] = sanitize_path(NULL, (*argv)[i], "", 0); |
| if (tmpdir) |
| tmpdir = sanitize_path(NULL, tmpdir, NULL, 0); |
| if (partial_dir) |
| partial_dir = sanitize_path(NULL, partial_dir, NULL, 0); |
| if (backup_dir) |
| backup_dir = sanitize_path(NULL, backup_dir, NULL, 0); |
| } |
| if (server_filter_list.head && !am_sender) { |
| struct filter_list_struct *elp = &server_filter_list; |
| int i; |
| if (tmpdir) { |
| if (!*tmpdir) |
| goto options_rejected; |
| clean_fname(tmpdir, 1); |
| if (check_filter(elp, tmpdir, 1) < 0) |
| goto options_rejected; |
| } |
| if (partial_dir && *partial_dir) { |
| clean_fname(partial_dir, 1); |
| if (check_filter(elp, partial_dir, 1) < 0) |
| goto options_rejected; |
| } |
| for (i = 0; i < basis_dir_cnt; i++) { |
| if (!*basis_dir[i]) |
| goto options_rejected; |
| clean_fname(basis_dir[i], 1); |
| if (check_filter(elp, basis_dir[i], 1) < 0) |
| goto options_rejected; |
| } |
| if (backup_dir) { |
| if (!*backup_dir) |
| goto options_rejected; |
| clean_fname(backup_dir, 1); |
| if (check_filter(elp, backup_dir, 1) < 0) { |
| options_rejected: |
| snprintf(err_buf, sizeof err_buf, |
| "Your options have been rejected by the server.\n"); |
| return 0; |
| } |
| } |
| } |
| |
| if (!backup_suffix) |
| backup_suffix = backup_dir ? "" : BACKUP_SUFFIX; |
| backup_suffix_len = strlen(backup_suffix); |
| if (strchr(backup_suffix, '/') != NULL) { |
| snprintf(err_buf, sizeof err_buf, |
| "--suffix cannot contain slashes: %s\n", |
| backup_suffix); |
| return 0; |
| } |
| if (backup_dir) { |
| backup_dir_len = strlcpy(backup_dir_buf, backup_dir, sizeof backup_dir_buf); |
| backup_dir_remainder = sizeof backup_dir_buf - backup_dir_len; |
| if (backup_dir_remainder < 32) { |
| snprintf(err_buf, sizeof err_buf, |
| "the --backup-dir path is WAY too long.\n"); |
| return 0; |
| } |
| if (backup_dir_buf[backup_dir_len - 1] != '/') { |
| backup_dir_buf[backup_dir_len++] = '/'; |
| backup_dir_buf[backup_dir_len] = '\0'; |
| } |
| if (verbose > 1 && !am_sender) { |
| rprintf(FINFO, "backup_dir is %s\n", |
| safe_fname(backup_dir_buf)); |
| } |
| } else if (!backup_suffix_len && (!am_server || !am_sender)) { |
| snprintf(err_buf, sizeof err_buf, |
| "--suffix cannot be a null string without --backup-dir\n"); |
| return 0; |
| } |
| if (make_backups && !backup_dir) |
| omit_dir_times = 1; |
| |
| if (log_format) { |
| if (log_format_has(log_format, 'i')) |
| log_format_has_i = 1; |
| if (!log_format_has(log_format, 'b') |
| && !log_format_has(log_format, 'c')) |
| log_before_transfer = !am_server; |
| } else if (itemize_changes) { |
| log_format = "%i %n%L"; |
| log_format_has_i = 1; |
| log_before_transfer = !am_server; |
| } |
| |
| if ((do_progress || dry_run) && !verbose && !log_before_transfer |
| && !am_server) |
| verbose = 1; |
| |
| if (dry_run) |
| do_xfers = 0; |
| |
| set_io_timeout(io_timeout); |
| |
| if (verbose && !log_format) { |
| log_format = "%n%L"; |
| log_before_transfer = !am_server; |
| } |
| if (log_format_has_i || log_format_has(log_format, 'o')) |
| log_format_has_o_or_i = 1; |
| |
| if (daemon_bwlimit && (!bwlimit || bwlimit > daemon_bwlimit)) |
| bwlimit = daemon_bwlimit; |
| if (bwlimit) { |
| bwlimit_writemax = (size_t)bwlimit * 128; |
| if (bwlimit_writemax < 512) |
| bwlimit_writemax = 512; |
| } |
| |
| if (delay_updates && !partial_dir) |
| partial_dir = partialdir_for_delayupdate; |
| |
| if (inplace) { |
| #ifdef HAVE_FTRUNCATE |
| if (partial_dir) { |
| snprintf(err_buf, sizeof err_buf, |
| "--inplace cannot be used with --%s\n", |
| delay_updates ? "delay-updates" : "partial-dir"); |
| return 0; |
| } |
| /* --inplace implies --partial for refusal purposes, but we |
| * clear the keep_partial flag for internal logic purposes. */ |
| if (refused_partial) { |
| create_refuse_error(refused_partial); |
| return 0; |
| } |
| keep_partial = 0; |
| #else |
| snprintf(err_buf, sizeof err_buf, |
| "--inplace is not supported on this %s\n", |
| am_server ? "server" : "client"); |
| return 0; |
| #endif |
| } else { |
| if (keep_partial && !partial_dir) { |
| if ((arg = getenv("RSYNC_PARTIAL_DIR")) != NULL && *arg) |
| partial_dir = strdup(arg); |
| } |
| if (partial_dir) { |
| if (*partial_dir) |
| clean_fname(partial_dir, 1); |
| if (!*partial_dir || strcmp(partial_dir, ".") == 0) |
| partial_dir = NULL; |
| else if (*partial_dir != '/') { |
| parse_rule(&filter_list, partial_dir, |
| MATCHFLG_NO_PREFIXES|MATCHFLG_DIRECTORY, 0); |
| } |
| if (!partial_dir && refused_partial) { |
| create_refuse_error(refused_partial); |
| return 0; |
| } |
| keep_partial = 1; |
| } |
| } |
| |
| if (files_from) { |
| char *h, *p; |
| int q; |
| if (*argc > 2 || (!am_daemon && *argc == 1)) { |
| usage(FERROR); |
| exit_cleanup(RERR_SYNTAX); |
| } |
| if (strcmp(files_from, "-") == 0) { |
| filesfrom_fd = 0; |
| if (am_server) |
| filesfrom_host = ""; /* reading from socket */ |
| } else if ((p = check_for_hostspec(files_from, &h, &q)) != 0) { |
| if (am_server) { |
| snprintf(err_buf, sizeof err_buf, |
| "The --files-from sent to the server cannot specify a host.\n"); |
| return 0; |
| } |
| files_from = p; |
| filesfrom_host = h; |
| if (strcmp(files_from, "-") == 0) { |
| snprintf(err_buf, sizeof err_buf, |
| "Invalid --files-from remote filename\n"); |
| return 0; |
| } |
| } else { |
| if (sanitize_paths) |
| files_from = sanitize_path(NULL, files_from, NULL, 0); |
| if (server_filter_list.head) { |
| if (!*files_from) |
| goto options_rejected; |
| clean_fname(files_from, 1); |
| if (check_filter(&server_filter_list, files_from, 0) < 0) |
| goto options_rejected; |
| } |
| filesfrom_fd = open(files_from, O_RDONLY|O_BINARY); |
| if (filesfrom_fd < 0) { |
| snprintf(err_buf, sizeof err_buf, |
| "failed to open files-from file %s: %s\n", |
| files_from, strerror(errno)); |
| return 0; |
| } |
| } |
| } |
| |
| am_starting_up = 0; |
| |
| return 1; |
| } |
| |
| |
| /** |
| * Construct a filtered list of options to pass through from the |
| * client to the server. |
| * |
| * This involves setting options that will tell the server how to |
| * behave, and also filtering out options that are processed only |
| * locally. |
| **/ |
| void server_options(char **args,int *argc) |
| { |
| static char argstr[64]; |
| int ac = *argc; |
| char *arg; |
| |
| int i, x; |
| |
| if (blocking_io == -1) |
| blocking_io = 0; |
| |
| args[ac++] = "--server"; |
| |
| if (daemon_over_rsh) { |
| args[ac++] = "--daemon"; |
| *argc = ac; |
| /* if we're passing --daemon, we're done */ |
| return; |
| } |
| |
| if (!am_sender) |
| args[ac++] = "--sender"; |
| |
| x = 1; |
| argstr[0] = '-'; |
| for (i = 0; i < verbose; i++) |
| argstr[x++] = 'v'; |
| |
| /* the -q option is intentionally left out */ |
| if (make_backups) |
| argstr[x++] = 'b'; |
| if (update_only) |
| argstr[x++] = 'u'; |
| if (!do_xfers) /* NOT "dry_run"! */ |
| argstr[x++] = 'n'; |
| if (preserve_links) |
| argstr[x++] = 'l'; |
| if (copy_links) |
| argstr[x++] = 'L'; |
| if (xfer_dirs > 1) |
| argstr[x++] = 'd'; |
| if (keep_dirlinks && am_sender) |
| argstr[x++] = 'K'; |
| |
| if (whole_file > 0) |
| argstr[x++] = 'W'; |
| /* We don't need to send --no-whole-file, because it's the |
| * default for remote transfers, and in any case old versions |
| * of rsync will not understand it. */ |
| |
| if (preserve_hard_links) |
| argstr[x++] = 'H'; |
| if (preserve_uid) |
| argstr[x++] = 'o'; |
| if (preserve_gid) |
| argstr[x++] = 'g'; |
| if (preserve_devices) |
| argstr[x++] = 'D'; |
| if (preserve_times) |
| argstr[x++] = 't'; |
| if (omit_dir_times == 2 && am_sender) |
| argstr[x++] = 'O'; |
| if (preserve_perms) |
| argstr[x++] = 'p'; |
| if (recurse) |
| argstr[x++] = 'r'; |
| if (always_checksum) |
| argstr[x++] = 'c'; |
| if (cvs_exclude) |
| argstr[x++] = 'C'; |
| if (ignore_times) |
| argstr[x++] = 'I'; |
| if (relative_paths) |
| argstr[x++] = 'R'; |
| if (one_file_system) |
| argstr[x++] = 'x'; |
| if (sparse_files) |
| argstr[x++] = 'S'; |
| if (do_compression) |
| argstr[x++] = 'z'; |
| |
| /* This is a complete hack - blame Rusty. FIXME! |
| * This hack is only needed for older rsync versions that |
| * don't understand the --list-only option. */ |
| if (list_only == 1 && !recurse) |
| argstr[x++] = 'r'; |
| |
| argstr[x] = 0; |
| |
| if (x != 1) |
| args[ac++] = argstr; |
| |
| if (list_only > 1) |
| args[ac++] = "--list-only"; |
| |
| /* The server side doesn't use our log-format, but in certain |
| * circumstances they need to know a little about the option. */ |
| if (log_format && am_sender) { |
| if (log_format_has_i) |
| args[ac++] = "--log-format=%i"; |
| else if (log_format_has_o_or_i) |
| args[ac++] = "--log-format=%o"; |
| else if (!verbose) |
| args[ac++] = "--log-format=X"; |
| } |
| |
| if (block_size) { |
| if (asprintf(&arg, "-B%lu", block_size) < 0) |
| goto oom; |
| args[ac++] = arg; |
| } |
| |
| if (max_delete && am_sender) { |
| if (asprintf(&arg, "--max-delete=%d", max_delete) < 0) |
| goto oom; |
| args[ac++] = arg; |
| } |
| |
| if (max_size && am_sender) { |
| args[ac++] = "--max-size"; |
| args[ac++] = max_size_arg; |
| } |
| |
| if (io_timeout) { |
| if (asprintf(&arg, "--timeout=%d", io_timeout) < 0) |
| goto oom; |
| args[ac++] = arg; |
| } |
| |
| if (bwlimit) { |
| if (asprintf(&arg, "--bwlimit=%d", bwlimit) < 0) |
| goto oom; |
| args[ac++] = arg; |
| } |
| |
| if (backup_dir) { |
| args[ac++] = "--backup-dir"; |
| args[ac++] = backup_dir; |
| } |
| |
| /* Only send --suffix if it specifies a non-default value. */ |
| if (strcmp(backup_suffix, backup_dir ? "" : BACKUP_SUFFIX) != 0) { |
| /* We use the following syntax to avoid weirdness with '~'. */ |
| if (asprintf(&arg, "--suffix=%s", backup_suffix) < 0) |
| goto oom; |
| args[ac++] = arg; |
| } |
| |
| if (am_sender) { |
| if (delete_excluded) |
| args[ac++] = "--delete-excluded"; |
| else if (delete_before == 1 || delete_after) |
| args[ac++] = "--delete"; |
| if (delete_before > 1) |
| args[ac++] = "--delete-before"; |
| if (delete_during) |
| args[ac++] = "--delete-during"; |
| if (delete_after) |
| args[ac++] = "--delete-after"; |
| if (force_delete) |
| args[ac++] = "--force"; |
| if (write_batch < 0) |
| args[ac++] = "--only-write-batch=X"; |
| } |
| |
| if (size_only) |
| args[ac++] = "--size-only"; |
| |
| if (modify_window_set) { |
| if (asprintf(&arg, "--modify-window=%d", modify_window) < 0) |
| goto oom; |
| args[ac++] = arg; |
| } |
| |
| if (checksum_seed) { |
| if (asprintf(&arg, "--checksum-seed=%d", checksum_seed) < 0) |
| goto oom; |
| args[ac++] = arg; |
| } |
| |
| if (partial_dir && am_sender) { |
| if (partial_dir != partialdir_for_delayupdate) { |
| args[ac++] = "--partial-dir"; |
| args[ac++] = partial_dir; |
| } |
| if (delay_updates) |
| args[ac++] = "--delay-updates"; |
| } else if (keep_partial) |
| args[ac++] = "--partial"; |
| |
| if (ignore_errors) |
| args[ac++] = "--ignore-errors"; |
| |
| if (copy_unsafe_links) |
| args[ac++] = "--copy-unsafe-links"; |
| |
| if (safe_symlinks) |
| args[ac++] = "--safe-links"; |
| |
| if (numeric_ids) |
| args[ac++] = "--numeric-ids"; |
| |
| if (only_existing && am_sender) |
| args[ac++] = "--existing"; |
| |
| if (opt_ignore_existing && am_sender) |
| args[ac++] = "--ignore-existing"; |
| |
| if (inplace) |
| args[ac++] = "--inplace"; |
| |
| if (tmpdir) { |
| args[ac++] = "--temp-dir"; |
| args[ac++] = tmpdir; |
| } |
| |
| if (basis_dir[0] && am_sender) { |
| /* the server only needs this option if it is not the sender, |
| * and it may be an older version that doesn't know this |
| * option, so don't send it if client is the sender. |
| */ |
| int i; |
| for (i = 0; i < basis_dir_cnt; i++) { |
| args[ac++] = dest_option; |
| args[ac++] = basis_dir[i]; |
| } |
| } |
| |
| if (files_from && (!am_sender || filesfrom_host)) { |
| if (filesfrom_host) { |
| args[ac++] = "--files-from"; |
| args[ac++] = files_from; |
| if (eol_nulls) |
| args[ac++] = "--from0"; |
| } else { |
| args[ac++] = "--files-from=-"; |
| args[ac++] = "--from0"; |
| } |
| if (!relative_paths) |
| args[ac++] = "--no-relative"; |
| } |
| if (!implied_dirs && !am_sender) |
| args[ac++] = "--no-implied-dirs"; |
| |
| if (fuzzy_basis && am_sender) |
| args[ac++] = "--fuzzy"; |
| |
| if (remove_sent_files) |
| args[ac++] = "--remove-sent-files"; |
| |
| *argc = ac; |
| return; |
| |
| oom: |
| out_of_memory("server_options"); |
| } |
| |
| /* Look for a HOST specfication of the form "HOST:PATH", "HOST::PATH", or |
| * "rsync://HOST:PORT/PATH". If found, *host_ptr will be set to some allocated |
| * memory with the HOST. If a daemon-accessing spec was specified, the value |
| * of *port_ptr will contain a non-0 port number, otherwise it will be set to |
| * 0. The return value is a pointer to the PATH. Note that the HOST spec can |
| * be an IPv6 literal address enclosed in '[' and ']' (such as "[::1]" or |
| * "[::ffff:127.0.0.1]") which is returned without the '[' and ']'. */ |
| char *check_for_hostspec(char *s, char **host_ptr, int *port_ptr) |
| { |
| char *p; |
| int not_host; |
| |
| if (port_ptr && strncasecmp(URL_PREFIX, s, strlen(URL_PREFIX)) == 0) { |
| char *path; |
| int hostlen; |
| s += strlen(URL_PREFIX); |
| if ((p = strchr(s, '/')) != NULL) { |
| hostlen = p - s; |
| path = p + 1; |
| } else { |
| hostlen = strlen(s); |
| path = ""; |
| } |
| if (*s == '[' && (p = strchr(s, ']')) != NULL) { |
| s++; |
| hostlen = p - s; |
| if (p[1] == ':') |
| *port_ptr = atoi(p+2); |
| } else { |
| if ((p = strchr(s, ':')) != NULL) { |
| hostlen = p - s; |
| *port_ptr = atoi(p+1); |
| } |
| } |
| if (!*port_ptr) |
| *port_ptr = RSYNC_PORT; |
| *host_ptr = new_array(char, hostlen + 1); |
| strlcpy(*host_ptr, s, hostlen + 1); |
| return path; |
| } |
| |
| if (*s == '[' && (p = strchr(s, ']')) != NULL && p[1] == ':') { |
| s++; |
| *p = '\0'; |
| not_host = strchr(s, '/') || !strchr(s, ':'); |
| *p = ']'; |
| if (not_host) |
| return NULL; |
| p++; |
| } else { |
| if (!(p = strchr(s, ':'))) |
| return NULL; |
| *p = '\0'; |
| not_host = strchr(s, '/') != NULL; |
| *p = ':'; |
| if (not_host) |
| return NULL; |
| } |
| |
| *host_ptr = new_array(char, p - s + 1); |
| strlcpy(*host_ptr, s, p - s + 1); |
| |
| if (p[1] == ':') { |
| if (port_ptr && !*port_ptr) |
| *port_ptr = RSYNC_PORT; |
| return p + 2; |
| } |
| if (port_ptr) |
| *port_ptr = 0; |
| |
| return p + 1; |
| } |