diff --git a/include/camera/CameraParameters2.h b/include/camera/CameraParameters2.h
new file mode 100644
index 0000000..88ad812
--- /dev/null
+++ b/include/camera/CameraParameters2.h
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_HARDWARE_CAMERA_PARAMETERS2_H
+#define ANDROID_HARDWARE_CAMERA_PARAMETERS2_H
+
+#include <utils/Vector.h>
+#include <utils/String8.h>
+#include "CameraParameters.h"
+
+namespace android {
+
+/**
+ * A copy of CameraParameters plus ABI-breaking changes. Needed
+ * because some camera HALs directly link to CameraParameters and cannot
+ * tolerate an ABI change.
+ */
+class CameraParameters2
+{
+public:
+    CameraParameters2();
+    CameraParameters2(const String8 &params) { unflatten(params); }
+    ~CameraParameters2();
+
+    String8 flatten() const;
+    void unflatten(const String8 &params);
+
+    void set(const char *key, const char *value);
+    void set(const char *key, int value);
+    void setFloat(const char *key, float value);
+    // Look up string value by key.
+    // -- The string remains valid until the next set/remove of the same key,
+    //    or until the map gets cleared.
+    const char *get(const char *key) const;
+    int getInt(const char *key) const;
+    float getFloat(const char *key) const;
+
+    // Compare the order that key1 was set vs the order that key2 was set.
+    //
+    // Sets the order parameter to an integer less than, equal to, or greater
+    // than zero if key1's set order was respectively, to be less than, to
+    // match, or to be greater than key2's set order.
+    //
+    // Error codes:
+    //  * NAME_NOT_FOUND - if either key has not been set previously
+    //  * BAD_VALUE - if any of the parameters are NULL
+    status_t compareSetOrder(const char *key1, const char *key2,
+            /*out*/
+            int *order) const;
+
+    void remove(const char *key);
+
+    void setPreviewSize(int width, int height);
+    void getPreviewSize(int *width, int *height) const;
+    void getSupportedPreviewSizes(Vector<Size> &sizes) const;
+
+    // Set the dimensions in pixels to the given width and height
+    // for video frames. The given width and height must be one
+    // of the supported dimensions returned from
+    // getSupportedVideoSizes(). Must not be called if
+    // getSupportedVideoSizes() returns an empty Vector of Size.
+    void setVideoSize(int width, int height);
+    // Retrieve the current dimensions (width and height)
+    // in pixels for video frames, which must be one of the
+    // supported dimensions returned from getSupportedVideoSizes().
+    // Must not be called if getSupportedVideoSizes() returns an
+    // empty Vector of Size.
+    void getVideoSize(int *width, int *height) const;
+    // Retrieve a Vector of supported dimensions (width and height)
+    // in pixels for video frames. If sizes returned from the method
+    // is empty, the camera does not support calls to setVideoSize()
+    // or getVideoSize(). In adddition, it also indicates that
+    // the camera only has a single output, and does not have
+    // separate output for video frames and preview frame.
+    void getSupportedVideoSizes(Vector<Size> &sizes) const;
+    // Retrieve the preferred preview size (width and height) in pixels
+    // for video recording. The given width and height must be one of
+    // supported preview sizes returned from getSupportedPreviewSizes().
+    // Must not be called if getSupportedVideoSizes() returns an empty
+    // Vector of Size. If getSupportedVideoSizes() returns an empty
+    // Vector of Size, the width and height returned from this method
+    // is invalid, and is "-1x-1".
+    void getPreferredPreviewSizeForVideo(int *width, int *height) const;
+
+    void setPreviewFrameRate(int fps);
+    int getPreviewFrameRate() const;
+    void getPreviewFpsRange(int *min_fps, int *max_fps) const;
+    void setPreviewFpsRange(int min_fps, int max_fps);
+    void setPreviewFormat(const char *format);
+    const char *getPreviewFormat() const;
+    void setPictureSize(int width, int height);
+    void getPictureSize(int *width, int *height) const;
+    void getSupportedPictureSizes(Vector<Size> &sizes) const;
+    void setPictureFormat(const char *format);
+    const char *getPictureFormat() const;
+
+    void dump() const;
+    status_t dump(int fd, const Vector<String16>& args) const;
+
+private:
+
+    // Quick and dirty map that maintains insertion order
+    template <typename KeyT, typename ValueT>
+    struct OrderedKeyedVector {
+
+        ssize_t add(const KeyT& key, const ValueT& value) {
+            return mList.add(Pair(key, value));
+        }
+
+        size_t size() const {
+            return mList.size();
+        }
+
+        const KeyT& keyAt(size_t idx) const {
+            return mList[idx].mKey;
+        }
+
+        const ValueT& valueAt(size_t idx) const {
+            return mList[idx].mValue;
+        }
+
+        const ValueT& valueFor(const KeyT& key) const {
+            ssize_t i = indexOfKey(key);
+            LOG_ALWAYS_FATAL_IF(i<0, "%s: key not found", __PRETTY_FUNCTION__);
+
+            return valueAt(i);
+        }
+
+        ssize_t indexOfKey(const KeyT& key) const {
+                size_t vectorIdx = 0;
+                for (; vectorIdx < mList.size(); ++vectorIdx) {
+                    if (mList[vectorIdx].mKey == key) {
+                        return (ssize_t) vectorIdx;
+                    }
+                }
+
+                return NAME_NOT_FOUND;
+        }
+
+        ssize_t removeItem(const KeyT& key) {
+            size_t vectorIdx = (size_t) indexOfKey(key);
+
+            if (vectorIdx < 0) {
+                return vectorIdx;
+            }
+
+            return mList.removeAt(vectorIdx);
+        }
+
+        void clear() {
+            mList.clear();
+        }
+
+        // Same as removing and re-adding. The key's index changes to max.
+        ssize_t replaceValueFor(const KeyT& key, const ValueT& value) {
+            removeItem(key);
+            return add(key, value);
+        }
+
+    private:
+
+        struct Pair {
+            Pair() : mKey(), mValue() {}
+            Pair(const KeyT& key, const ValueT& value) :
+                    mKey(key),
+                    mValue(value) {}
+            KeyT   mKey;
+            ValueT mValue;
+        };
+
+        Vector<Pair> mList;
+    };
+
+    /**
+     * Order matters: Keys that are set() later are stored later in the map.
+     *
+     * If two keys have meaning that conflict, then the later-set key
+     * wins.
+     *
+     * For example, preview FPS and preview FPS range conflict since only
+     * we only want to use the FPS range if that's the last thing that was set.
+     * So in that case, only use preview FPS range if it was set later than
+     * the preview FPS.
+     */
+    OrderedKeyedVector<String8,String8>    mMap;
+};
+
+}; // namespace android
+
+#endif