aaudio test: test flowgraph
Construct simple data flow graphs and measure the output.
Bug: 65067568
Test: this is a test
Change-Id: I7d7794fd56c2e2ced130ea501a456f2690a64b59
diff --git a/media/libaaudio/tests/Android.bp b/media/libaaudio/tests/Android.bp
index 68194db..99aa4d6 100644
--- a/media/libaaudio/tests/Android.bp
+++ b/media/libaaudio/tests/Android.bp
@@ -167,3 +167,15 @@
srcs: ["test_atomic_fifo.cpp"],
shared_libs: ["libaaudio"],
}
+
+cc_test {
+ name: "test_flowgraph",
+ defaults: ["libaaudio_tests_defaults"],
+ srcs: ["test_flowgraph.cpp"],
+ shared_libs: [
+ "libaaudio",
+ "libbinder",
+ "libcutils",
+ "libutils",
+ ],
+}
diff --git a/media/libaaudio/tests/test_flowgraph.cpp b/media/libaaudio/tests/test_flowgraph.cpp
new file mode 100644
index 0000000..d563a7e
--- /dev/null
+++ b/media/libaaudio/tests/test_flowgraph.cpp
@@ -0,0 +1,157 @@
+/*
+ * Copyright 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Test FlowGraph
+ */
+
+#include <iostream>
+
+#include <gtest/gtest.h>
+
+#include "flowgraph/ClipToRange.h"
+#include "flowgraph/MonoToMultiConverter.h"
+#include "flowgraph/SourceFloat.h"
+#include "flowgraph/RampLinear.h"
+#include "flowgraph/SinkFloat.h"
+#include "flowgraph/SinkI16.h"
+#include "flowgraph/SinkI24.h"
+#include "flowgraph/SourceI16.h"
+#include "flowgraph/SourceI24.h"
+
+using namespace flowgraph;
+
+constexpr int kBytesPerI24Packed = 3;
+
+TEST(test_flowgraph, module_sinki16) {
+ static const float input[] = {1.0f, 0.5f, -0.25f, -1.0f, 0.0f, 53.9f, -87.2f};
+ static const int16_t expected[] = {32767, 16384, -8192, -32768, 0, 32767, -32768};
+ int16_t output[20];
+ SourceFloat sourceFloat{1};
+ SinkI16 sinkI16{1};
+
+ int numInputFrames = sizeof(input) / sizeof(input[0]);
+ sourceFloat.setData(input, numInputFrames);
+ sourceFloat.output.connect(&sinkI16.input);
+
+ int numOutputFrames = sizeof(output) / sizeof(int16_t);
+ int32_t numRead = sinkI16.read(output, numOutputFrames);
+ ASSERT_EQ(numInputFrames, numRead);
+ for (int i = 0; i < numRead; i++) {
+ EXPECT_EQ(expected[i], output[i]);
+ }
+}
+
+TEST(test_flowgraph, module_mono_to_stereo) {
+ static const float input[] = {1.0f, 2.0f, 3.0f};
+ float output[100] = {};
+ SourceFloat sourceFloat{1};
+ MonoToMultiConverter monoToStereo{2};
+ SinkFloat sinkFloat{2};
+
+ sourceFloat.setData(input, 3);
+
+ sourceFloat.output.connect(&monoToStereo.input);
+ monoToStereo.output.connect(&sinkFloat.input);
+
+ int32_t numRead = sinkFloat.read(output, 8);
+ ASSERT_EQ(3, numRead);
+ EXPECT_EQ(input[0], output[0]);
+ EXPECT_EQ(input[0], output[1]);
+ EXPECT_EQ(input[1], output[2]);
+ EXPECT_EQ(input[1], output[3]);
+}
+
+TEST(test_flowgraph, module_ramp_linear) {
+ constexpr int rampSize = 5;
+ constexpr int numOutput = 100;
+ constexpr float value = 1.0f;
+ constexpr float target = 100.0f;
+ float output[numOutput] = {};
+ RampLinear rampLinear{1};
+ SinkFloat sinkFloat{1};
+
+ rampLinear.input.setValue(value);
+ rampLinear.setLengthInFrames(rampSize);
+ rampLinear.setTarget(target);
+ rampLinear.forceCurrent(0.0f);
+
+ rampLinear.output.connect(&sinkFloat.input);
+
+ int32_t numRead = sinkFloat.read(output, numOutput);
+ ASSERT_EQ(numOutput, numRead);
+ constexpr float tolerance = 0.0001f; // arbitrary
+ int i = 0;
+ for (; i < rampSize; i++) {
+ float expected = i * value * target / rampSize;
+ EXPECT_NEAR(expected, output[i], tolerance);
+ }
+ for (; i < numOutput; i++) {
+ float expected = value * target;
+ EXPECT_NEAR(expected, output[i], tolerance);
+ }
+}
+
+// It is easiest to represent packed 24-bit data as a byte array.
+// This test will read from input, convert to float, then write
+// back to output as bytes.
+TEST(test_flowgraph, module_packed_24) {
+ static const uint8_t input[] = {0x01, 0x23, 0x45,
+ 0x67, 0x89, 0xAB,
+ 0xCD, 0xEF, 0x5A};
+ uint8_t output[99] = {};
+ SourceI24 sourceI24{1};
+ SinkI24 sinkI24{1};
+
+ int numInputFrames = sizeof(input) / kBytesPerI24Packed;
+ sourceI24.setData(input, numInputFrames);
+ sourceI24.output.connect(&sinkI24.input);
+
+ int32_t numRead = sinkI24.read(output, sizeof(output) / kBytesPerI24Packed);
+ ASSERT_EQ(numInputFrames, numRead);
+ for (size_t i = 0; i < sizeof(input); i++) {
+ EXPECT_EQ(input[i], output[i]);
+ }
+}
+
+TEST(test_flowgraph, module_clip_to_range) {
+ constexpr float myMin = -2.0f;
+ constexpr float myMax = 1.5f;
+
+ static const float input[] = {-9.7, 0.5f, -0.25, 1.0f, 12.3};
+ static const float expected[] = {myMin, 0.5f, -0.25, 1.0f, myMax};
+ float output[100];
+ SourceFloat sourceFloat{1};
+ ClipToRange clipper{1};
+ SinkFloat sinkFloat{1};
+
+ int numInputFrames = sizeof(input) / sizeof(input[0]);
+ sourceFloat.setData(input, numInputFrames);
+
+ clipper.setMinimum(myMin);
+ clipper.setMaximum(myMax);
+
+ sourceFloat.output.connect(&clipper.input);
+ clipper.output.connect(&sinkFloat.input);
+
+ int numOutputFrames = sizeof(output) / sizeof(output[0]);
+ int32_t numRead = sinkFloat.read(output, numOutputFrames);
+ ASSERT_EQ(numInputFrames, numRead);
+ constexpr float tolerance = 0.000001f; // arbitrary
+ for (int i = 0; i < numRead; i++) {
+ EXPECT_NEAR(expected[i], output[i], tolerance);
+ }
+}