diff --git a/camera/ndk/impl/ACameraMetadata.cpp b/camera/ndk/impl/ACameraMetadata.cpp
index bfa60d9..631f6cd 100644
--- a/camera/ndk/impl/ACameraMetadata.cpp
+++ b/camera/ndk/impl/ACameraMetadata.cpp
@@ -527,6 +527,7 @@
         case ACAMERA_LENS_OPTICAL_STABILIZATION_MODE:
         case ACAMERA_NOISE_REDUCTION_MODE:
         case ACAMERA_SCALER_CROP_REGION:
+        case ACAMERA_SCALER_ROTATE_AND_CROP:
         case ACAMERA_SENSOR_EXPOSURE_TIME:
         case ACAMERA_SENSOR_FRAME_DURATION:
         case ACAMERA_SENSOR_SENSITIVITY:
diff --git a/camera/ndk/include/camera/NdkCameraMetadataTags.h b/camera/ndk/include/camera/NdkCameraMetadataTags.h
index 16457ac..0808eaa 100644
--- a/camera/ndk/include/camera/NdkCameraMetadataTags.h
+++ b/camera/ndk/include/camera/NdkCameraMetadataTags.h
@@ -3728,6 +3728,108 @@
     ACAMERA_SCALER_AVAILABLE_RECOMMENDED_INPUT_OUTPUT_FORMATS_MAP = 
                                                                 // int32
             ACAMERA_SCALER_START + 15,
+    /**
+     * <p>List of rotate-and-crop modes for ACAMERA_SCALER_ROTATE_AND_CROP that are supported by this camera device.</p>
+     *
+     * @see ACAMERA_SCALER_ROTATE_AND_CROP
+     *
+     * <p>Type: byte[n]</p>
+     *
+     * <p>This tag may appear in:
+     * <ul>
+     *   <li>ACameraMetadata from ACameraManager_getCameraCharacteristics</li>
+     * </ul></p>
+     *
+     * <p>This entry lists the valid modes for ACAMERA_SCALER_ROTATE_AND_CROP for this camera device.</p>
+     * <p>Starting with API level 30, all devices will list at least <code>ROTATE_AND_CROP_NONE</code>.
+     * Devices with support for rotate-and-crop will additionally list at least
+     * <code>ROTATE_AND_CROP_AUTO</code> and <code>ROTATE_AND_CROP_90</code>.</p>
+     *
+     * @see ACAMERA_SCALER_ROTATE_AND_CROP
+     */
+    ACAMERA_SCALER_AVAILABLE_ROTATE_AND_CROP_MODES =            // byte[n]
+            ACAMERA_SCALER_START + 16,
+    /**
+     * <p>Whether a rotation-and-crop operation is applied to processed
+     * outputs from the camera.</p>
+     *
+     * <p>Type: byte (acamera_metadata_enum_android_scaler_rotate_and_crop_t)</p>
+     *
+     * <p>This tag may appear in:
+     * <ul>
+     *   <li>ACameraMetadata from ACameraCaptureSession_captureCallback_result callbacks</li>
+     *   <li>ACaptureRequest</li>
+     * </ul></p>
+     *
+     * <p>This control is primarily intended to help camera applications with no support for
+     * multi-window modes to work correctly on devices where multi-window scenarios are
+     * unavoidable, such as foldables or other devices with variable display geometry or more
+     * free-form window placement (such as laptops, which often place portrait-orientation apps
+     * in landscape with pillarboxing).</p>
+     * <p>If supported, the default value is <code>ROTATE_AND_CROP_AUTO</code>, which allows the camera API
+     * to enable backwards-compatibility support for applications that do not support resizing
+     * / multi-window modes, when the device is in fact in a multi-window mode (such as inset
+     * portrait on laptops, or on a foldable device in some fold states).  In addition,
+     * <code>ROTATE_AND_CROP_NONE</code> and <code>ROTATE_AND_CROP_90</code> will always be available if this control
+     * is supported by the device.  If not supported, devices API level 30 or higher will always
+     * list only <code>ROTATE_AND_CROP_NONE</code>.</p>
+     * <p>When <code>CROP_AUTO</code> is in use, and the camera API activates backward-compatibility mode,
+     * several metadata fields will also be parsed differently to ensure that coordinates are
+     * correctly handled for features like drawing face detection boxes or passing in
+     * tap-to-focus coordinates.  The camera API will convert positions in the active array
+     * coordinate system to/from the cropped-and-rotated coordinate system to make the
+     * operation transparent for applications.  The following controls are affected:</p>
+     * <ul>
+     * <li>ACAMERA_CONTROL_AE_REGIONS</li>
+     * <li>ACAMERA_CONTROL_AF_REGIONS</li>
+     * <li>ACAMERA_CONTROL_AWB_REGIONS</li>
+     * <li>android.statistics.faces</li>
+     * </ul>
+     * <p>Capture results will contain the actual value selected by the API;
+     * <code>ROTATE_AND_CROP_AUTO</code> will never be seen in a capture result.</p>
+     * <p>Applications can also select their preferred cropping mode, either to opt out of the
+     * backwards-compatibility treatment, or to use the cropping feature themselves as needed.
+     * In this case, no coordinate translation will be done automatically, and all controls
+     * will continue to use the normal active array coordinates.</p>
+     * <p>Cropping and rotating is done after the application of digital zoom (via either
+     * ACAMERA_SCALER_CROP_REGION or ACAMERA_CONTROL_ZOOM_RATIO), but before each individual
+     * output is further cropped and scaled. It only affects processed outputs such as
+     * YUV, PRIVATE, and JPEG.  It has no effect on RAW outputs.</p>
+     * <p>When <code>CROP_90</code> or <code>CROP_270</code> are selected, there is a significant loss to the field of
+     * view. For example, with a 4:3 aspect ratio output of 1600x1200, <code>CROP_90</code> will still
+     * produce 1600x1200 output, but these buffers are cropped from a vertical 3:4 slice at the
+     * center of the 4:3 area, then rotated to be 4:3, and then upscaled to 1600x1200.  Only
+     * 56.25% of the original FOV is still visible.  In general, for an aspect ratio of <code>w:h</code>,
+     * the crop and rotate operation leaves <code>(h/w)^2</code> of the field of view visible. For 16:9,
+     * this is ~31.6%.</p>
+     * <p>As a visual example, the figure below shows the effect of <code>ROTATE_AND_CROP_90</code> on the
+     * outputs for the following parameters:</p>
+     * <ul>
+     * <li>Sensor active array: <code>2000x1500</code></li>
+     * <li>Crop region: top-left: <code>(500, 375)</code>, size: <code>(1000, 750)</code> (4:3 aspect ratio)</li>
+     * <li>Output streams: YUV <code>640x480</code> and YUV <code>1280x720</code></li>
+     * <li><code>ROTATE_AND_CROP_90</code></li>
+     * </ul>
+     * <p><img alt="Effect of ROTATE_AND_CROP_90" src="../images/camera2/metadata/android.scaler.rotateAndCrop/crop-region-rotate-90-43-ratio.png" /></p>
+     * <p>With these settings, the regions of the active array covered by the output streams are:</p>
+     * <ul>
+     * <li>640x480 stream crop: top-left: <code>(219, 375)</code>, size: <code>(562, 750)</code></li>
+     * <li>1280x720 stream crop: top-left: <code>(289, 375)</code>, size: <code>(422, 750)</code></li>
+     * </ul>
+     * <p>Since the buffers are rotated, the buffers as seen by the application are:</p>
+     * <ul>
+     * <li>640x480 stream: top-left: <code>(781, 375)</code> on active array, size: <code>(640, 480)</code>, downscaled 1.17x from sensor pixels</li>
+     * <li>1280x720 stream: top-left: <code>(711, 375)</code> on active array, size: <code>(1280, 720)</code>, upscaled 1.71x from sensor pixels</li>
+     * </ul>
+     *
+     * @see ACAMERA_CONTROL_AE_REGIONS
+     * @see ACAMERA_CONTROL_AF_REGIONS
+     * @see ACAMERA_CONTROL_AWB_REGIONS
+     * @see ACAMERA_CONTROL_ZOOM_RATIO
+     * @see ACAMERA_SCALER_CROP_REGION
+     */
+    ACAMERA_SCALER_ROTATE_AND_CROP =                            // byte (acamera_metadata_enum_android_scaler_rotate_and_crop_t)
+            ACAMERA_SCALER_START + 17,
     ACAMERA_SCALER_END,
 
     /**
@@ -8263,6 +8365,51 @@
 
 } acamera_metadata_enum_android_scaler_available_recommended_stream_configurations_t;
 
+// ACAMERA_SCALER_ROTATE_AND_CROP
+typedef enum acamera_metadata_enum_acamera_scaler_rotate_and_crop {
+    /**
+     * <p>No rotate and crop is applied. Processed outputs are in the sensor orientation.</p>
+     */
+    ACAMERA_SCALER_ROTATE_AND_CROP_NONE                              = 0,
+
+    /**
+     * <p>Processed images are rotated by 90 degrees clockwise, and then cropped
+     * to the original aspect ratio.</p>
+     */
+    ACAMERA_SCALER_ROTATE_AND_CROP_90                                = 1,
+
+    /**
+     * <p>Processed images are rotated by 180 degrees.  Since the aspect ratio does not
+     * change, no cropping is performed.</p>
+     */
+    ACAMERA_SCALER_ROTATE_AND_CROP_180                               = 2,
+
+    /**
+     * <p>Processed images are rotated by 270 degrees clockwise, and then cropped
+     * to the original aspect ratio.</p>
+     */
+    ACAMERA_SCALER_ROTATE_AND_CROP_270                               = 3,
+
+    /**
+     * <p>The camera API automatically selects the best concrete value for
+     * rotate-and-crop based on the application's support for resizability and the current
+     * multi-window mode.</p>
+     * <p>If the application does not support resizing but the display mode for its main
+     * Activity is not in a typical orientation, the camera API will set <code>ROTATE_AND_CROP_90</code>
+     * or some other supported rotation value, depending on device configuration,
+     * to ensure preview and captured images are correctly shown to the user. Otherwise,
+     * <code>ROTATE_AND_CROP_NONE</code> will be selected.</p>
+     * <p>When a value other than NONE is selected, several metadata fields will also be parsed
+     * differently to ensure that coordinates are correctly handled for features like drawing
+     * face detection boxes or passing in tap-to-focus coordinates.  The camera API will
+     * convert positions in the active array coordinate system to/from the cropped-and-rotated
+     * coordinate system to make the operation transparent for applications.</p>
+     * <p>No coordinate mapping will be done when the application selects a non-AUTO mode.</p>
+     */
+    ACAMERA_SCALER_ROTATE_AND_CROP_AUTO                              = 4,
+
+} acamera_metadata_enum_android_scaler_rotate_and_crop_t;
+
 
 // ACAMERA_SENSOR_REFERENCE_ILLUMINANT1
 typedef enum acamera_metadata_enum_acamera_sensor_reference_illuminant1 {
diff --git a/camera/ndk/include/camera/NdkCameraWindowType.h b/camera/ndk/include/camera/NdkCameraWindowType.h
index 99f67e9..df977da 100644
--- a/camera/ndk/include/camera/NdkCameraWindowType.h
+++ b/camera/ndk/include/camera/NdkCameraWindowType.h
@@ -44,7 +44,7 @@
  */
 #ifdef __ANDROID_VNDK__
 #include <cutils/native_handle.h>
-typedef native_handle_t ACameraWindowType;
+typedef const native_handle_t ACameraWindowType;
 #else
 #include <android/native_window.h>
 typedef ANativeWindow ACameraWindowType;
diff --git a/camera/ndk/ndk_vendor/impl/ACameraCaptureSessionVendor.h b/camera/ndk/ndk_vendor/impl/ACameraCaptureSessionVendor.h
index e1af8c1..5a1af79 100644
--- a/camera/ndk/ndk_vendor/impl/ACameraCaptureSessionVendor.h
+++ b/camera/ndk/ndk_vendor/impl/ACameraCaptureSessionVendor.h
@@ -18,7 +18,7 @@
 #include "utils.h"
 
 struct ACaptureSessionOutput {
-    explicit ACaptureSessionOutput(native_handle_t* window, bool isShared = false,
+    explicit ACaptureSessionOutput(const native_handle_t* window, bool isShared = false,
             const char* physicalCameraId = "") :
             mWindow(window), mIsShared(isShared), mPhysicalCameraId(physicalCameraId) {};
 
diff --git a/camera/ndk/ndk_vendor/impl/ACameraDevice.cpp b/camera/ndk/ndk_vendor/impl/ACameraDevice.cpp
index e511a3f..0fcb700 100644
--- a/camera/ndk/ndk_vendor/impl/ACameraDevice.cpp
+++ b/camera/ndk/ndk_vendor/impl/ACameraDevice.cpp
@@ -355,7 +355,7 @@
     std::vector<int32_t> requestStreamIdxList;
     std::vector<int32_t> requestSurfaceIdxList;
     for (auto outputTarget : request->targets->mOutputs) {
-        native_handle_t* anw = outputTarget.mWindow;
+        const native_handle_t* anw = outputTarget.mWindow;
         bool found = false;
         req->mSurfaceList.push_back(anw);
         // lookup stream/surface ID
@@ -434,7 +434,7 @@
     }
     pRequest->targets = new ACameraOutputTargets();
     for (size_t i = 0; i < req->mSurfaceList.size(); i++) {
-        native_handle_t* anw = req->mSurfaceList[i];
+        const native_handle_t* anw = req->mSurfaceList[i];
         ACameraOutputTarget outputTarget(anw);
         pRequest->targets->mOutputs.insert(outputTarget);
     }
@@ -611,7 +611,7 @@
 
     std::set<std::pair<native_handle_ptr_wrapper, OutputConfigurationWrapper>> outputSet;
     for (auto outConfig : outputs->mOutputs) {
-        native_handle_t* anw = outConfig.mWindow;
+        const native_handle_t* anw = outConfig.mWindow;
         OutputConfigurationWrapper outConfigInsertW;
         OutputConfiguration &outConfigInsert = outConfigInsertW.mOutputConfiguration;
         outConfigInsert.rotation = utils::convertToHidl(outConfig.mRotation);
@@ -846,8 +846,7 @@
             for (auto streamAndWindowId : request->mCaptureRequest.streamAndWindowIds) {
                 int32_t windowId = streamAndWindowId.windowId;
                 if (utils::isWindowNativeHandleEqual(windowHandles[windowId],outHandle)) {
-                    native_handle_t* anw =
-                        const_cast<native_handle_t *>(windowHandles[windowId].getNativeHandle());
+                    const native_handle_t* anw = windowHandles[windowId].getNativeHandle();
                     ALOGV("Camera %s Lost output buffer for ANW %p frame %" PRId64,
                             getId(), anw, frameNumber);
 
@@ -1244,7 +1243,7 @@
                         return;
                     }
 
-                    native_handle_t* anw;
+                    const native_handle_t* anw;
                     found = msg->findPointer(kAnwKey, (void**) &anw);
                     if (!found) {
                         ALOGE("%s: Cannot find native_handle_t!", __FUNCTION__);
diff --git a/camera/ndk/ndk_vendor/impl/ACaptureRequestVendor.h b/camera/ndk/ndk_vendor/impl/ACaptureRequestVendor.h
index ed67615..5715d77 100644
--- a/camera/ndk/ndk_vendor/impl/ACaptureRequestVendor.h
+++ b/camera/ndk/ndk_vendor/impl/ACaptureRequestVendor.h
@@ -17,7 +17,7 @@
 #include "utils.h"
 
 struct ACameraOutputTarget {
-    explicit ACameraOutputTarget(native_handle_t* window) : mWindow(window) {};
+    explicit ACameraOutputTarget(const native_handle_t* window) : mWindow(window) {};
 
     bool operator == (const ACameraOutputTarget& other) const {
         return mWindow == other.mWindow;
diff --git a/camera/ndk/ndk_vendor/impl/utils.h b/camera/ndk/ndk_vendor/impl/utils.h
index f389f03..6f5820e 100644
--- a/camera/ndk/ndk_vendor/impl/utils.h
+++ b/camera/ndk/ndk_vendor/impl/utils.h
@@ -42,7 +42,7 @@
 // Utility class so that CaptureRequest can be stored by sp<>
 struct CaptureRequest : public RefBase {
   frameworks::cameraservice::device::V2_0::CaptureRequest mCaptureRequest;
-  std::vector<native_handle_t *> mSurfaceList;
+  std::vector<const native_handle_t *> mSurfaceList;
   //Physical camera settings metadata is stored here, since the capture request
   //might not contain it. That's since, fmq might have consumed it.
   hidl_vec<PhysicalCameraSettings> mPhysicalCameraSettings;
@@ -62,13 +62,13 @@
 // Utility class so the native_handle_t can be compared with  its contents instead
 // of just raw pointer comparisons.
 struct native_handle_ptr_wrapper {
-    native_handle_t *mWindow = nullptr;
+    const native_handle_t *mWindow = nullptr;
 
-    native_handle_ptr_wrapper(native_handle_t *nh) : mWindow(nh) { }
+    native_handle_ptr_wrapper(const native_handle_t *nh) : mWindow(nh) { }
 
     native_handle_ptr_wrapper() = default;
 
-    operator native_handle_t *() const { return mWindow; }
+    operator const native_handle_t *() const { return mWindow; }
 
     bool operator ==(const native_handle_ptr_wrapper other) const {
         return isWindowNativeHandleEqual(mWindow, other.mWindow);
diff --git a/camera/ndk/ndk_vendor/tests/AImageReaderVendorTest.cpp b/camera/ndk/ndk_vendor/tests/AImageReaderVendorTest.cpp
index 938b5f5..ba14c5c 100644
--- a/camera/ndk/ndk_vendor/tests/AImageReaderVendorTest.cpp
+++ b/camera/ndk/ndk_vendor/tests/AImageReaderVendorTest.cpp
@@ -50,7 +50,7 @@
 static constexpr int kTestImageFormat = AIMAGE_FORMAT_YUV_420_888;
 
 using android::hardware::camera::common::V1_0::helper::VendorTagDescriptorCache;
-using ConfiguredWindows = std::set<native_handle_t *>;
+using ConfiguredWindows = std::set<const native_handle_t *>;
 
 class CameraHelper {
    public:
@@ -60,11 +60,11 @@
 
     struct PhysicalImgReaderInfo {
         const char* physicalCameraId;
-        native_handle_t* anw;
+        const native_handle_t* anw;
     };
 
     // Retaining the error code in case the caller needs to analyze it.
-    std::variant<int, ConfiguredWindows> initCamera(native_handle_t* imgReaderAnw,
+    std::variant<int, ConfiguredWindows> initCamera(const native_handle_t* imgReaderAnw,
             const std::vector<PhysicalImgReaderInfo>& physicalImgReaders,
             bool usePhysicalSettings) {
         ConfiguredWindows configuredWindows;
@@ -257,7 +257,7 @@
     ACameraDevice_StateCallbacks mDeviceCb{this, nullptr, nullptr};
     ACameraCaptureSession_stateCallbacks mSessionCb{ this, nullptr, nullptr, nullptr};
 
-    native_handle_t* mImgReaderAnw = nullptr;  // not owned by us.
+    const native_handle_t* mImgReaderAnw = nullptr;  // not owned by us.
 
     // Camera device
     ACameraDevice* mDevice = nullptr;
@@ -396,7 +396,7 @@
         return 0;
     }
 
-    native_handle_t* getNativeWindow() { return mImgReaderAnw; }
+    const native_handle_t* getNativeWindow() { return mImgReaderAnw; }
 
     int getAcquiredImageCount() {
         std::lock_guard<std::mutex> lock(mMutex);
diff --git a/media/audioserver/Android.mk b/media/audioserver/Android.mk
index cf1c14c..c948188 100644
--- a/media/audioserver/Android.mk
+++ b/media/audioserver/Android.mk
@@ -19,8 +19,9 @@
 	libmediautils \
 	libnbaio \
 	libnblog \
+	libpowermanager \
 	libutils \
-	libvibrator
+	libvibrator \
 
 LOCAL_HEADER_LIBRARIES := \
 	libaudiohal_headers \
diff --git a/media/libaaudio/Doxyfile.orig b/media/libaaudio/Doxyfile.orig
deleted file mode 100644
index 137facb..0000000
--- a/media/libaaudio/Doxyfile.orig
+++ /dev/null
@@ -1,2303 +0,0 @@
-# Doxyfile 1.8.6
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a double hash (##) is considered a comment and is placed in
-# front of the TAG it is preceding.
-#
-# All text after a single hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists, items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (\" \").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
-# The default value is: UTF-8.
-
-DOXYFILE_ENCODING      = UTF-8
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
-# double-quotes, unless you are using Doxywizard) that should identify the
-# project for which the documentation is generated. This name is used in the
-# title of most generated pages and in a few other places.
-# The default value is: My Project.
-
-PROJECT_NAME           = "My Project"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
-# could be handy for archiving the generated documentation or if some version
-# control system is used.
-
-PROJECT_NUMBER         =
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer a
-# quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF          =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
-# the documentation. The maximum height of the logo should not exceed 55 pixels
-# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
-# to the output directory.
-
-PROJECT_LOGO           =
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
-# into which the generated documentation will be written. If a relative path is
-# entered, it will be relative to the location where doxygen was started. If
-# left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       =
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
-# directories (in 2 levels) under the output directory of each output format and
-# will distribute the generated files over these directories. Enabling this
-# option can be useful when feeding doxygen a huge amount of source files, where
-# putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
-# The default value is: NO.
-
-CREATE_SUBDIRS         = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
-# Ukrainian and Vietnamese.
-# The default value is: English.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
-# descriptions after the members that are listed in the file and class
-# documentation (similar to Javadoc). Set to NO to disable this.
-# The default value is: YES.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
-# description of a member or function before the detailed description
-#
-# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-# The default value is: YES.
-
-REPEAT_BRIEF           = YES
-
-# This tag implements a quasi-intelligent brief description abbreviator that is
-# used to form the text in various listings. Each string in this list, if found
-# as the leading text of the brief description, will be stripped from the text
-# and the result, after processing the whole list, is used as the annotated
-# text. Otherwise, the brief description is used as-is. If left blank, the
-# following values are used ($name is automatically replaced with the name of
-# the entity):The $name class, The $name widget, The $name file, is, provides,
-# specifies, contains, represents, a, an and the.
-
-ABBREVIATE_BRIEF       =
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# doxygen will generate a detailed section even if there is only a brief
-# description.
-# The default value is: NO.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-# The default value is: NO.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
-# before files name in the file list and in the header files. If set to NO the
-# shortest path that makes the file name unique will be used
-# The default value is: YES.
-
-FULL_PATH_NAMES        = YES
-
-# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
-# Stripping is only done if one of the specified strings matches the left-hand
-# part of the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the path to
-# strip.
-#
-# Note that you can specify absolute paths here, but also relative paths, which
-# will be relative from the directory where doxygen is started.
-# This tag requires that the tag FULL_PATH_NAMES is set to YES.
-
-STRIP_FROM_PATH        =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
-# path mentioned in the documentation of a class, which tells the reader which
-# header file to include in order to use a class. If left blank only the name of
-# the header file containing the class definition is used. Otherwise one should
-# specify the list of include paths that are normally passed to the compiler
-# using the -I flag.
-
-STRIP_FROM_INC_PATH    =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
-# less readable) file names. This can be useful is your file systems doesn't
-# support long names like on DOS, Mac, or CD-ROM.
-# The default value is: NO.
-
-SHORT_NAMES            = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
-# first line (until the first dot) of a Javadoc-style comment as the brief
-# description. If set to NO, the Javadoc-style will behave just like regular Qt-
-# style comments (thus requiring an explicit @brief command for a brief
-# description.)
-# The default value is: NO.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
-# line (until the first dot) of a Qt-style comment as the brief description. If
-# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
-# requiring an explicit \brief command for a brief description.)
-# The default value is: NO.
-
-QT_AUTOBRIEF           = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
-# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
-# a brief description. This used to be the default behavior. The new default is
-# to treat a multi-line C++ comment block as a detailed description. Set this
-# tag to YES if you prefer the old behavior instead.
-#
-# Note that setting this tag to YES also means that rational rose comments are
-# not recognized any more.
-# The default value is: NO.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
-# documentation from any documented member that it re-implements.
-# The default value is: YES.
-
-INHERIT_DOCS           = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
-# new page for each member. If set to NO, the documentation of a member will be
-# part of the file/class/namespace that contains it.
-# The default value is: NO.
-
-SEPARATE_MEMBER_PAGES  = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
-# uses this value to replace tabs by spaces in code fragments.
-# Minimum value: 1, maximum value: 16, default value: 4.
-
-TAB_SIZE               = 4
-
-# This tag can be used to specify a number of aliases that act as commands in
-# the documentation. An alias has the form:
-# name=value
-# For example adding
-# "sideeffect=@par Side Effects:\n"
-# will allow you to put the command \sideeffect (or @sideeffect) in the
-# documentation, which will result in a user-defined paragraph with heading
-# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
-
-ALIASES                =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST              =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
-# only. Doxygen will then generate output that is more tailored for C. For
-# instance, some of the names that are used will be different. The list of all
-# members will be omitted, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_FOR_C  = NO
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
-# Python sources only. Doxygen will then generate output that is more tailored
-# for that language. For instance, namespaces will be presented as packages,
-# qualified scopes will look different, etc.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources. Doxygen will then generate output that is tailored for Fortran.
-# The default value is: NO.
-
-OPTIMIZE_FOR_FORTRAN   = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for VHDL.
-# The default value is: NO.
-
-OPTIMIZE_OUTPUT_VHDL   = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given
-# extension. Doxygen has a built-in mapping, but you can override or extend it
-# using this tag. The format is ext=language, where ext is a file extension, and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make
-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
-# (default is Fortran), use: inc=Fortran f=C.
-#
-# Note For files without extension you can use no_extension as a placeholder.
-#
-# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
-
-EXTENSION_MAPPING      =
-
-# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
-# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you can
-# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
-# case of backward compatibilities issues.
-# The default value is: YES.
-
-MARKDOWN_SUPPORT       = YES
-
-# When enabled doxygen tries to link words that correspond to documented
-# classes, or namespaces to their corresponding documentation. Such a link can
-# be prevented in individual cases by by putting a % sign in front of the word
-# or globally by setting AUTOLINK_SUPPORT to NO.
-# The default value is: YES.
-
-AUTOLINK_SUPPORT       = YES
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should set this
-# tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string);
-# versus func(std::string) {}). This also make the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-# The default value is: NO.
-
-BUILTIN_STL_SUPPORT    = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-# The default value is: NO.
-
-CPP_CLI_SUPPORT        = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
-# will parse them like normal C++ but will assume all classes use public instead
-# of private inheritance when no explicit protection keyword is present.
-# The default value is: NO.
-
-SIP_SUPPORT            = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate
-# getter and setter methods for a property. Setting this option to YES will make
-# doxygen to replace the get and set methods by a property in the documentation.
-# This will only work if the methods are indeed getting or setting a simple
-# type. If this is not the case, or you want to show the methods anyway, you
-# should set this option to NO.
-# The default value is: YES.
-
-IDL_PROPERTY_SUPPORT   = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-# The default value is: NO.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# Set the SUBGROUPING tag to YES to allow class member groups of the same type
-# (for instance a group of public functions) to be put as a subgroup of that
-# type (e.g. under the Public Functions section). Set it to NO to prevent
-# subgrouping. Alternatively, this can be done per class using the
-# \nosubgrouping command.
-# The default value is: YES.
-
-SUBGROUPING            = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
-# are shown inside the group in which they are included (e.g. using \ingroup)
-# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
-# and RTF).
-#
-# Note that this feature does not work in combination with
-# SEPARATE_MEMBER_PAGES.
-# The default value is: NO.
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
-# with only public data fields or simple typedef fields will be shown inline in
-# the documentation of the scope in which they are defined (i.e. file,
-# namespace, or group documentation), provided this scope is documented. If set
-# to NO, structs, classes, and unions are shown on a separate page (for HTML and
-# Man pages) or section (for LaTeX and RTF).
-# The default value is: NO.
-
-INLINE_SIMPLE_STRUCTS  = NO
-
-# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
-# enum is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically be
-# useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-# The default value is: NO.
-
-TYPEDEF_HIDES_STRUCT   = NO
-
-# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
-# cache is used to resolve symbols given their name and scope. Since this can be
-# an expensive process and often the same symbol appears multiple times in the
-# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
-# doxygen will become slower. If the cache is too large, memory is wasted. The
-# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
-# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
-# symbols. At the end of a run doxygen will report the cache usage and suggest
-# the optimal cache size from a speed point of view.
-# Minimum value: 0, maximum value: 9, default value: 0.
-
-LOOKUP_CACHE_SIZE      = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available. Private
-# class members and static file members will be hidden unless the
-# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
-# Note: This will also disable the warnings about undocumented members that are
-# normally produced when WARNINGS is set to YES.
-# The default value is: NO.
-
-EXTRACT_ALL            = NO
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
-# be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PRIVATE        = NO
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
-# scope will be included in the documentation.
-# The default value is: NO.
-
-EXTRACT_PACKAGE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
-# included in the documentation.
-# The default value is: NO.
-
-EXTRACT_STATIC         = NO
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
-# locally in source files will be included in the documentation. If set to NO
-# only classes defined in header files are included. Does not have any effect
-# for Java sources.
-# The default value is: YES.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# This flag is only useful for Objective-C code. When set to YES local methods,
-# which are defined in the implementation section but not in the interface are
-# included in the documentation. If set to NO only methods in the interface are
-# included.
-# The default value is: NO.
-
-EXTRACT_LOCAL_METHODS  = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base name of
-# the file that contains the anonymous namespace. By default anonymous namespace
-# are hidden.
-# The default value is: NO.
-
-EXTRACT_ANON_NSPACES   = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
-# undocumented members inside documented classes or files. If set to NO these
-# members will be included in the various overviews, but no documentation
-# section is generated. This option has no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_MEMBERS     = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy. If set
-# to NO these classes will be included in the various overviews. This option has
-# no effect if EXTRACT_ALL is enabled.
-# The default value is: NO.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO these declarations will be
-# included in the documentation.
-# The default value is: NO.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
-# documentation blocks found inside the body of a function. If set to NO these
-# blocks will be appended to the function's detailed documentation block.
-# The default value is: NO.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation that is typed after a
-# \internal command is included. If the tag is set to NO then the documentation
-# will be excluded. Set it to YES to include the internal documentation.
-# The default value is: NO.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-# The default value is: system dependent.
-
-CASE_SENSE_NAMES       = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
-# their full class and namespace scopes in the documentation. If set to YES the
-# scope will be hidden.
-# The default value is: NO.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
-# the files that are included by a file in the documentation of that file.
-# The default value is: YES.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
-# grouped member an include statement to the documentation, telling the reader
-# which file to include in order to use the member.
-# The default value is: NO.
-
-SHOW_GROUPED_MEMB_INC  = NO
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
-# files with double quotes in the documentation rather than with sharp brackets.
-# The default value is: NO.
-
-FORCE_LOCAL_INCLUDES   = NO
-
-# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
-# documentation for inline members.
-# The default value is: YES.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
-# (detailed) documentation of file and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order.
-# The default value is: YES.
-
-SORT_MEMBER_DOCS       = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
-# descriptions of file, namespace and class members alphabetically by member
-# name. If set to NO the members will appear in declaration order. Note that
-# this will also influence the order of the classes in the class list.
-# The default value is: NO.
-
-SORT_BRIEF_DOCS        = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
-# (brief and detailed) documentation of class members so that constructors and
-# destructors are listed first. If set to NO the constructors will appear in the
-# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
-# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
-# member documentation.
-# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
-# detailed member documentation.
-# The default value is: NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
-# of group names into alphabetical order. If set to NO the group names will
-# appear in their defined order.
-# The default value is: NO.
-
-SORT_GROUP_NAMES       = NO
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
-# fully-qualified names, including namespaces. If set to NO, the class list will
-# be sorted only by class name, not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the alphabetical
-# list.
-# The default value is: NO.
-
-SORT_BY_SCOPE_NAME     = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
-# type resolution of all parameters of a function it will reject a match between
-# the prototype and the implementation of a member function even if there is
-# only one candidate or it is obvious which candidate to choose by doing a
-# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
-# accept a match between prototype and implementation in such cases.
-# The default value is: NO.
-
-STRICT_PROTO_MATCHING  = NO
-
-# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
-# todo list. This list is created by putting \todo commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TODOLIST      = YES
-
-# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
-# test list. This list is created by putting \test commands in the
-# documentation.
-# The default value is: YES.
-
-GENERATE_TESTLIST      = YES
-
-# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
-# list. This list is created by putting \bug commands in the documentation.
-# The default value is: YES.
-
-GENERATE_BUGLIST       = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
-# the deprecated list. This list is created by putting \deprecated commands in
-# the documentation.
-# The default value is: YES.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation
-# sections, marked by \if <section_label> ... \endif and \cond <section_label>
-# ... \endcond blocks.
-
-ENABLED_SECTIONS       =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
-# initial value of a variable or macro / define can have for it to appear in the
-# documentation. If the initializer consists of more lines than specified here
-# it will be hidden. Use a value of 0 to hide initializers completely. The
-# appearance of the value of individual variables and macros / defines can be
-# controlled using \showinitializer or \hideinitializer command in the
-# documentation regardless of this setting.
-# Minimum value: 0, maximum value: 10000, default value: 30.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
-# the bottom of the documentation of classes and structs. If set to YES the list
-# will mention the files that were used to generate the documentation.
-# The default value is: YES.
-
-SHOW_USED_FILES        = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
-# will remove the Files entry from the Quick Index and from the Folder Tree View
-# (if specified).
-# The default value is: YES.
-
-SHOW_FILES             = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
-# page. This will remove the Namespaces entry from the Quick Index and from the
-# Folder Tree View (if specified).
-# The default value is: YES.
-
-SHOW_NAMESPACES        = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command command input-file, where command is the value of the
-# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
-# by doxygen. Whatever the program writes to standard output is used as the file
-# version. For an example see the documentation.
-
-FILE_VERSION_FILTER    =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option. You can
-# optionally specify a file name after the option, if omitted DoxygenLayout.xml
-# will be used as the name of the layout file.
-#
-# Note that if you run doxygen from a directory containing a file called
-# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
-# tag is left empty.
-
-LAYOUT_FILE            =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
-# the reference definitions. This must be a list of .bib files. The .bib
-# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
-# For LaTeX the style of the bibliography can be controlled using
-# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
-# search path. Do not use file names with spaces, bibtex cannot handle them. See
-# also \cite for info how to create references.
-
-CITE_BIB_FILES         =
-
-#---------------------------------------------------------------------------
-# Configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated to
-# standard output by doxygen. If QUIET is set to YES this implies that the
-# messages are off.
-# The default value is: NO.
-
-QUIET                  = NO
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
-# this implies that the warnings are on.
-#
-# Tip: Turn warnings on while writing the documentation.
-# The default value is: YES.
-
-WARNINGS               = YES
-
-# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
-# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
-# will automatically be disabled.
-# The default value is: YES.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some parameters
-# in a documented function, or documenting parameters that don't exist or using
-# markup commands wrongly.
-# The default value is: YES.
-
-WARN_IF_DOC_ERROR      = YES
-
-# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
-# are documented, but have no documentation for their parameters or return
-# value. If set to NO doxygen will only warn about wrong or incomplete parameter
-# documentation, but not about the absence of documentation.
-# The default value is: NO.
-
-WARN_NO_PARAMDOC       = NO
-
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen
-# can produce. The string should contain the $file, $line, and $text tags, which
-# will be replaced by the file and line number from which the warning originated
-# and the warning text. Optionally the format may contain $version, which will
-# be replaced by the version of the file (if it could be obtained via
-# FILE_VERSION_FILTER)
-# The default value is: $file:$line: $text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error
-# messages should be written. If left blank the output is written to standard
-# error (stderr).
-
-WARN_LOGFILE           =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag is used to specify the files and/or directories that contain
-# documented source files. You may enter file names like myfile.cpp or
-# directories like /usr/src/myproject. Separate the files or directories with
-# spaces.
-# Note: If this tag is empty the current directory is searched.
-
-INPUT                  =
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
-# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
-# The default value is: UTF-8.
-
-INPUT_ENCODING         = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank the
-# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
-# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
-# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
-# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
-# *.qsf, *.as and *.js.
-
-FILE_PATTERNS          =
-
-# The RECURSIVE tag can be used to specify whether or not subdirectories should
-# be searched for input files as well.
-# The default value is: NO.
-
-RECURSIVE              = NO
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-#
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE                =
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-# The default value is: NO.
-
-EXCLUDE_SYMLINKS       = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories.
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories for example use the pattern */test/*
-
-EXCLUDE_PATTERNS       =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
-
-EXCLUDE_SYMBOLS        =
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories
-# that contain example code fragments that are included (see the \include
-# command).
-
-EXAMPLE_PATH           =
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
-# *.h) to filter out the source-files in the directories. If left blank all
-# files are included.
-
-EXAMPLE_PATTERNS       =
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude commands
-# irrespective of the value of the RECURSIVE tag.
-# The default value is: NO.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or directories
-# that contain images that are to be included in the documentation (see the
-# \image command).
-
-IMAGE_PATH             =
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
-# name of an input file. Doxygen will then use the output that the filter
-# program writes to standard output. If FILTER_PATTERNS is specified, this tag
-# will be ignored.
-#
-# Note that the filter must not add or remove lines; it is applied before the
-# code is scanned, but not when the output code is generated. If lines are added
-# or removed, the anchors will not be placed correctly.
-
-INPUT_FILTER           =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis. Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match. The filters are a list of the form: pattern=filter
-# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
-# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
-# patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS        =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER ) will also be used to filter the input files that are used for
-# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-# The default value is: NO.
-
-FILTER_SOURCE_FILES    = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
-# it is also possible to disable source filtering for a specific pattern using
-# *.ext= (so without naming a filter).
-# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
-
-FILTER_SOURCE_PATTERNS =
-
-# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
-# is part of the input, its contents will be placed on the main page
-# (index.html). This can be useful if you have a project on for instance GitHub
-# and want to reuse the introduction page also for the doxygen output.
-
-USE_MDFILE_AS_MAINPAGE =
-
-#---------------------------------------------------------------------------
-# Configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
-# generated. Documented entities will be cross-referenced with these sources.
-#
-# Note: To get rid of all source code in the generated output, make sure that
-# also VERBATIM_HEADERS is set to NO.
-# The default value is: NO.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body of functions,
-# classes and enums directly into the documentation.
-# The default value is: NO.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
-# special comment blocks from generated source code fragments. Normal C, C++ and
-# Fortran comments will always remain visible.
-# The default value is: YES.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
-# The default value is: NO.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES then for each documented function
-# all documented entities called/used by that function will be listed.
-# The default value is: NO.
-
-REFERENCES_RELATION    = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
-# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
-# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
-# link to the documentation.
-# The default value is: YES.
-
-REFERENCES_LINK_SOURCE = YES
-
-# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
-# source code will show a tooltip with additional information such as prototype,
-# brief description and links to the definition and documentation. Since this
-# will make the HTML file larger and loading of large files a bit slower, you
-# can opt to disable this feature.
-# The default value is: YES.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-SOURCE_TOOLTIPS        = YES
-
-# If the USE_HTAGS tag is set to YES then the references to source code will
-# point to the HTML generated by the htags(1) tool instead of doxygen built-in
-# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
-# 4.8.6 or higher.
-#
-# To use it do the following:
-# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# - Make sure the INPUT points to the root of the source tree
-# - Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these
-# tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to
-# source code will now point to the output of htags.
-# The default value is: NO.
-# This tag requires that the tag SOURCE_BROWSER is set to YES.
-
-USE_HTAGS              = NO
-
-# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
-# verbatim copy of the header file for each class for which an include is
-# specified. Set to NO to disable this.
-# See also: Section \class.
-# The default value is: YES.
-
-VERBATIM_HEADERS       = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
-# compounds will be generated. Enable this if the project contains a lot of
-# classes, structs, unions or interfaces.
-# The default value is: YES.
-
-ALPHABETICAL_INDEX     = YES
-
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all classes will
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
-# while generating the index headers.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-IGNORE_PREFIX          =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
-# The default value is: YES.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
-# generated HTML page (for example: .htm, .php, .asp).
-# The default value is: .html.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
-# each generated HTML page. If the tag is left blank doxygen will generate a
-# standard header.
-#
-# To get valid HTML the header file that includes any scripts and style sheets
-# that doxygen needs, which is dependent on the configuration options used (e.g.
-# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
-# default header using
-# doxygen -w html new_header.html new_footer.html new_stylesheet.css
-# YourConfigFile
-# and then modify the file new_header.html. See also section "Doxygen usage"
-# for information on how to generate the default header that doxygen normally
-# uses.
-# Note: The header is subject to change so you typically have to regenerate the
-# default header when upgrading to a newer version of doxygen. For a description
-# of the possible markers and block names see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_HEADER            =
-
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
-# generated HTML page. If the tag is left blank doxygen will generate a standard
-# footer. See HTML_HEADER for more information on how to generate a default
-# footer and what special commands can be used inside the footer. See also
-# section "Doxygen usage" for information on how to generate the default footer
-# that doxygen normally uses.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_FOOTER            =
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
-# sheet that is used by each HTML page. It can be used to fine-tune the look of
-# the HTML output. If left blank doxygen will generate a default style sheet.
-# See also section "Doxygen usage" for information on how to generate the style
-# sheet that doxygen normally uses.
-# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
-# it is more robust and this tag (HTML_STYLESHEET) will in the future become
-# obsolete.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_STYLESHEET        =
-
-# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user-
-# defined cascading style sheet that is included after the standard style sheets
-# created by doxygen. Using this option one can overrule certain style aspects.
-# This is preferred over using HTML_STYLESHEET since it does not replace the
-# standard style sheet and is therefor more robust against future updates.
-# Doxygen will copy the style sheet file to the output directory. For an example
-# see the documentation.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_STYLESHEET  =
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
-# files will be copied as-is; there are no commands or markers available.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_EXTRA_FILES       =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
-# will adjust the colors in the stylesheet and background images according to
-# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
-# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
-# purple, and 360 is red again.
-# Minimum value: 0, maximum value: 359, default value: 220.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_HUE    = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
-# in the HTML output. For a value of 0 the output will use grayscales only. A
-# value of 255 will produce the most vivid colors.
-# Minimum value: 0, maximum value: 255, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_SAT    = 100
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
-# luminance component of the colors in the HTML output. Values below 100
-# gradually make the output lighter, whereas values above 100 make the output
-# darker. The value divided by 100 is the actual gamma applied, so 80 represents
-# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
-# change the gamma.
-# Minimum value: 40, maximum value: 240, default value: 80.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = YES
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_DYNAMIC_SECTIONS  = NO
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
-# shown in the various tree structured indices initially; the user can expand
-# and collapse entries dynamically later on. Doxygen will expand the tree to
-# such a level that at most the specified number of entries are visible (unless
-# a fully collapsed tree already exceeds this amount). So setting the number of
-# entries 1 will produce a full collapsed tree by default. 0 is a special value
-# representing an infinite number of entries and will result in a full expanded
-# tree by default.
-# Minimum value: 0, maximum value: 9999, default value: 100.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files will be
-# generated that can be used as input for Apple's Xcode 3 integrated development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset in
-# that directory and running make install will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_DOCSET        = NO
-
-# This tag determines the name of the docset feed. A documentation feed provides
-# an umbrella under which multiple documentation sets from a single provider
-# (such as a company or product suite) can be grouped.
-# The default value is: Doxygen generated docs.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_FEEDNAME        = "Doxygen generated docs"
-
-# This tag specifies a string that should uniquely identify the documentation
-# set bundle. This should be a reverse domain-name style string, e.g.
-# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_BUNDLE_ID       = org.doxygen.Project
-
-# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-# The default value is: org.doxygen.Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
-
-# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
-# The default value is: Publisher.
-# This tag requires that the tag GENERATE_DOCSET is set to YES.
-
-DOCSET_PUBLISHER_NAME  = Publisher
-
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
-# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
-# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output
-# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
-# files are now used as the Windows 98 help format, and will replace the old
-# Windows help format (.hlp) on all Windows platforms in the future. Compressed
-# HTML files also contain an index, a table of contents, and you can search for
-# words in the documentation. The HTML workshop also contains a viewer for
-# compressed HTML files.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_HTMLHELP      = NO
-
-# The CHM_FILE tag can be used to specify the file name of the resulting .chm
-# file. You can add a path in front of the file if the result should not be
-# written to the html output directory.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_FILE               =
-
-# The HHC_LOCATION tag can be used to specify the location (absolute path
-# including file name) of the HTML help compiler ( hhc.exe). If non-empty
-# doxygen will try to run the HTML help compiler on the generated index.hhp.
-# The file has to be specified with full path.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-HHC_LOCATION           =
-
-# The GENERATE_CHI flag controls if a separate .chi index file is generated (
-# YES) or that it should be included in the master .chm file ( NO).
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-GENERATE_CHI           = NO
-
-# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
-# and project file content.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-CHM_INDEX_ENCODING     =
-
-# The BINARY_TOC flag controls whether a binary table of contents is generated (
-# YES) or a normal table of contents ( NO) in the .chm file.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to
-# the table of contents of the HTML help documentation and to the tree view.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
-
-TOC_EXPAND             = NO
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
-# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
-# (.qch) of the generated HTML documentation.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_QHP           = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
-# the file name of the resulting .qch file. The path specified is relative to
-# the HTML output folder.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QCH_FILE               =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
-# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_NAMESPACE          = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
-# Help Project output. For more information please see Qt Help Project / Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
-# The default value is: doc.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_VIRTUAL_FOLDER     = doc
-
-# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
-# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_NAME   =
-
-# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_CUST_FILTER_ATTRS  =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHP_SECT_FILTER_ATTRS  =
-
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
-# This tag requires that the tag GENERATE_QHP is set to YES.
-
-QHG_LOCATION           =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
-# generated, together with the HTML files, they form an Eclipse help plugin. To
-# install this plugin and make it available under the help contents menu in
-# Eclipse, the contents of the directory containing the HTML and XML files needs
-# to be copied into the plugins directory of eclipse. The name of the directory
-# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
-# After copying Eclipse needs to be restarted before the help appears.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_ECLIPSEHELP   = NO
-
-# A unique identifier for the Eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have this
-# name. Each documentation set should have its own identifier.
-# The default value is: org.doxygen.Project.
-# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
-
-ECLIPSE_DOC_ID         = org.doxygen.Project
-
-# If you want full control over the layout of the generated HTML pages it might
-# be necessary to disable the index and replace it with your own. The
-# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
-# of each HTML page. A value of NO enables the index and the value YES disables
-# it. Since the tabs in the index contain the same information as the navigation
-# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-DISABLE_INDEX          = NO
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information. If the tag
-# value is set to YES, a side panel will be generated containing a tree-like
-# index structure (just like the one that is generated for HTML Help). For this
-# to work a browser that supports JavaScript, DHTML, CSS and frames is required
-# (i.e. any modern browser). Windows users are probably better off using the
-# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
-# further fine-tune the look of the index. As an example, the default style
-# sheet generated by doxygen has an example that shows how to put an image at
-# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
-# the same information as the tab index, you could consider setting
-# DISABLE_INDEX to YES when enabling this option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-GENERATE_TREEVIEW      = NO
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
-# doxygen will group on one line in the generated HTML documentation.
-#
-# Note that a value of 0 will completely suppress the enum values from appearing
-# in the overview section.
-# Minimum value: 0, maximum value: 20, default value: 4.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-ENUM_VALUES_PER_LINE   = 4
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
-# to set the initial width (in pixels) of the frame in which the tree is shown.
-# Minimum value: 0, maximum value: 1500, default value: 250.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-TREEVIEW_WIDTH         = 250
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
-# external symbols imported via tag files in a separate window.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-EXT_LINKS_IN_WINDOW    = NO
-
-# Use this tag to change the font size of LaTeX formulas included as images in
-# the HTML documentation. When you change the font size after a successful
-# doxygen run you need to manually remove any form_*.png images from the HTML
-# output directory to force them to be regenerated.
-# Minimum value: 8, maximum value: 50, default value: 10.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_FONTSIZE       = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
-# instead of using prerendered bitmaps. Use this if you do not have LaTeX
-# installed or if you want to formulas look prettier in the HTML output. When
-# enabled you may also need to install MathJax separately and configure the path
-# to it using the MATHJAX_RELPATH option.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-USE_MATHJAX            = NO
-
-# When MathJax is enabled you can set the default output format to be used for
-# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
-# Possible values are: HTML-CSS (which is slower, but has the best
-# compatibility), NativeMML (i.e. MathML) and SVG.
-# The default value is: HTML-CSS.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_FORMAT         = HTML-CSS
-
-# When MathJax is enabled you need to specify the location relative to the HTML
-# output directory using the MATHJAX_RELPATH option. The destination directory
-# should contain the MathJax.js script. For instance, if the mathjax directory
-# is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
-# Content Delivery Network so you can quickly see the result without installing
-# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
-# extension names that should be enabled during MathJax rendering. For example
-# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_EXTENSIONS     =
-
-# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
-# of code that will be used on startup of the MathJax code. See the MathJax site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
-# example see the documentation.
-# This tag requires that the tag USE_MATHJAX is set to YES.
-
-MATHJAX_CODEFILE       =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
-# the HTML output. The underlying search engine uses javascript and DHTML and
-# should work on any modern browser. Note that when using HTML help
-# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
-# there is already a search function so this one should typically be disabled.
-# For large projects the javascript based search engine can be slow, then
-# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
-# search using the keyboard; to jump to the search box use <access key> + S
-# (what the <access key> is depends on the OS and browser, but it is typically
-# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
-# key> to jump into the search results window, the results can be navigated
-# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
-# the search. The filter options can be selected when the cursor is inside the
-# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
-# to select a filter and <Enter> or <escape> to activate or cancel the filter
-# option.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-SEARCHENGINE           = YES
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript. There
-# are two flavours of web server based searching depending on the
-# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
-# searching and an index file used by the script. When EXTERNAL_SEARCH is
-# enabled the indexing and searching needs to be provided by external tools. See
-# the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SERVER_BASED_SEARCH    = NO
-
-# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
-# script for searching. Instead the search results are written to an XML file
-# which needs to be processed by an external indexer. Doxygen will invoke an
-# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
-# search results.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
-#
-# See the section "External Indexing and Searching" for details.
-# The default value is: NO.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH        = NO
-
-# The SEARCHENGINE_URL should point to a search engine hosted by a web server
-# which will return the search results when EXTERNAL_SEARCH is enabled.
-#
-# Doxygen ships with an example indexer ( doxyindexer) and search engine
-# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHENGINE_URL       =
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
-# search data is written to a file for indexing by an external tool. With the
-# SEARCHDATA_FILE tag the name of this file can be specified.
-# The default file is: searchdata.xml.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-SEARCHDATA_FILE        = searchdata.xml
-
-# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
-# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
-# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
-# projects and redirect the results back to the right project.
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTERNAL_SEARCH_ID     =
-
-# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
-# projects other than the one defined by this configuration file, but that are
-# all added to the same external search index. Each project needs to have a
-# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
-# to a relative location where the documentation can be found. The format is:
-# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
-# This tag requires that the tag SEARCHENGINE is set to YES.
-
-EXTRA_SEARCH_MAPPINGS  =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
-# The default value is: YES.
-
-GENERATE_LATEX         = YES
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked.
-#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
-# index for LaTeX.
-# The default file is: makeindex.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used by the
-# printer.
-# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
-# 14 inches) and executive (7.25 x 10.5 inches).
-# The default value is: a4.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PAPER_TYPE             = a4
-
-# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
-# that should be included in the LaTeX output. To get the times font for
-# instance you can specify
-# EXTRA_PACKAGES=times
-# If left blank no extra packages will be included.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-EXTRA_PACKAGES         =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
-# generated LaTeX document. The header should contain everything until the first
-# chapter. If it is left blank doxygen will generate a standard header. See
-# section "Doxygen usage" for information on how to let doxygen write the
-# default header to a separate file.
-#
-# Note: Only use a user-defined header if you know what you are doing! The
-# following commands have a special meaning inside the header: $title,
-# $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will
-# replace them by respectively the title of the page, the current date and time,
-# only the current date, the version number of doxygen, the project name (see
-# PROJECT_NAME), or the project number (see PROJECT_NUMBER).
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HEADER           =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
-# generated LaTeX document. The footer should contain everything after the last
-# chapter. If it is left blank doxygen will generate a standard footer.
-#
-# Note: Only use a user-defined footer if you know what you are doing!
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_FOOTER           =
-
-# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the LATEX_OUTPUT output
-# directory. Note that the files will be copied as-is; there are no commands or
-# markers available.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_EXTRA_FILES      =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
-# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
-# contain links (just like the HTML output) instead of page references. This
-# makes the output suitable for online browsing using a PDF viewer.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-PDF_HYPERLINKS         = YES
-
-# If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES to get a
-# higher quality PDF documentation.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-USE_PDFLATEX           = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
-# if errors occur, instead of asking the user for help. This option is also used
-# when generating formulas in HTML.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BATCHMODE        = NO
-
-# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
-# index chapters (such as File Index, Compound Index, etc.) in the output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_HIDE_INDICES     = NO
-
-# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
-# code with syntax highlighting in the LaTeX output.
-#
-# Note that which sources are shown also depends on other settings such as
-# SOURCE_BROWSER.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_SOURCE_CODE      = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
-# The default value is: plain.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_BIB_STYLE        = plain
-
-#---------------------------------------------------------------------------
-# Configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
-# RTF output is optimized for Word 97 and may not look too pretty with other RTF
-# readers/editors.
-# The default value is: NO.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: rtf.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
-# documents. This may be useful for small projects and may help to save some
-# trees in general.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
-# contain hyperlink fields. The RTF file will contain links (just like the HTML
-# output) instead of page references. This makes the output suitable for online
-# browsing using Word or some other Word compatible readers that support those
-# fields.
-#
-# Note: WordPad (write) and others do not support links.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
-#
-# See also section "Doxygen usage" for information on how to generate the
-# default style sheet that doxygen normally uses.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_STYLESHEET_FILE    =
-
-# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
-# This tag requires that the tag GENERATE_RTF is set to YES.
-
-RTF_EXTENSIONS_FILE    =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
-# classes and files.
-# The default value is: NO.
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it. A directory man3 will be created inside the directory specified by
-# MAN_OUTPUT.
-# The default directory is: man.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to the generated
-# man pages. In case the manual section does not start with a number, the number
-# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
-# optional.
-# The default value is: .3.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_EXTENSION          = .3
-
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
-# will generate one additional man file for each entity documented in the real
-# man page(s). These additional files only source the real man page, but without
-# them the man command would be unable to find the correct page.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_MAN is set to YES.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
-# captures the structure of the code including all documentation.
-# The default value is: NO.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
-# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
-# it.
-# The default directory is: xml.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_OUTPUT             = xml
-
-# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a
-# validating XML parser to check the syntax of the XML files.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_SCHEMA             =
-
-# The XML_DTD tag can be used to specify a XML DTD, which can be used by a
-# validating XML parser to check the syntax of the XML files.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_DTD                =
-
-# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
-# listings (including syntax highlighting and cross-referencing information) to
-# the XML output. Note that enabling this will significantly increase the size
-# of the XML output.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_XML is set to YES.
-
-XML_PROGRAMLISTING     = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to the DOCBOOK output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
-# that can be used to generate PDF.
-# The default value is: NO.
-
-GENERATE_DOCBOOK       = NO
-
-# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
-# front of it.
-# The default directory is: docbook.
-# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
-
-DOCBOOK_OUTPUT         = docbook
-
-#---------------------------------------------------------------------------
-# Configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
-# Definitions (see http://autogen.sf.net) file that captures the structure of
-# the code including all documentation. Note that this feature is still
-# experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# Configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
-# file that captures the structure of the code including all documentation.
-#
-# Note that this feature is still experimental and incomplete at the moment.
-# The default value is: NO.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
-# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
-# output from the Perl module output.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
-# formatted so it can be parsed by a human reader. This is useful if you want to
-# understand what is going on. On the other hand, if this tag is set to NO the
-# size of the Perl module output will be much smaller and Perl will parse it
-# just the same.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file are
-# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
-# so different doxyrules.make files included by the same Makefile don't
-# overwrite each other's variables.
-# This tag requires that the tag GENERATE_PERLMOD is set to YES.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
-# C-preprocessor directives found in the sources and include files.
-# The default value is: YES.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
-# in the source code. If set to NO only conditional compilation will be
-# performed. Macro expansion can be done in a controlled way by setting
-# EXPAND_ONLY_PREDEF to YES.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-MACRO_EXPANSION        = NO
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
-# the macro expansion is limited to the macros specified with the PREDEFINED and
-# EXPAND_AS_DEFINED tags.
-# The default value is: NO.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_ONLY_PREDEF     = NO
-
-# If the SEARCH_INCLUDES tag is set to YES the includes files in the
-# INCLUDE_PATH will be searched if a #include is found.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by the
-# preprocessor.
-# This tag requires that the tag SEARCH_INCLUDES is set to YES.
-
-INCLUDE_PATH           =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will be
-# used.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-INCLUDE_FILE_PATTERNS  =
-
-# The PREDEFINED tag can be used to specify one or more macro names that are
-# defined before the preprocessor is started (similar to the -D option of e.g.
-# gcc). The argument of the tag is a list of macros of the form: name or
-# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
-# is assumed. To prevent a macro definition from being undefined via #undef or
-# recursively expanded use the := operator instead of the = operator.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-PREDEFINED             =
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
-# tag can be used to specify a list of macro names that should be expanded. The
-# macro definition that is found in the sources will be used. Use the PREDEFINED
-# tag if you want to use a different macro definition that overrules the
-# definition found in the source code.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-EXPAND_AS_DEFINED      =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
-# remove all refrences to function-like macros that are alone on a line, have an
-# all uppercase name, and do not end with a semicolon. Such function macros are
-# typically used for boiler-plate code, and will confuse the parser if not
-# removed.
-# The default value is: YES.
-# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration options related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES tag can be used to specify one or more tag files. For each tag
-# file the location of the external documentation should be added. The format of
-# a tag file without this location is as follows:
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where loc1 and loc2 can be relative or absolute paths or URLs. See the
-# section "Linking to external documentation" for more information about the use
-# of tag files.
-# Note: Each tag file must have an unique name (where the name does NOT include
-# the path). If a tag file is not located in the directory in which doxygen is
-# run, you must also specify the path to the tagfile here.
-
-TAGFILES               =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
-# tag file that is based on the input files it reads. See section "Linking to
-# external documentation" for more information about the usage of tag files.
-
-GENERATE_TAGFILE       =
-
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
-# class index. If set to NO only the inherited external classes will be listed.
-# The default value is: NO.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
-# the modules index. If set to NO, only the current project's groups will be
-# listed.
-# The default value is: YES.
-
-EXTERNAL_GROUPS        = YES
-
-# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
-# the related pages index. If set to NO, only the current project's pages will
-# be listed.
-# The default value is: YES.
-
-EXTERNAL_PAGES         = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
-# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
-# NO turns the diagrams off. Note that this option also works with HAVE_DOT
-# disabled, but it is recommended to install and use dot, since it yields more
-# powerful graphs.
-# The default value is: YES.
-
-CLASS_DIAGRAMS         = YES
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH            =
-
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
-# If set to YES, the inheritance and collaboration graphs will hide inheritance
-# and usage relations if the target is undocumented or is not a class.
-# The default value is: YES.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
-# Bell Labs. The other options in this section have no effect if this option is
-# set to NO
-# The default value is: NO.
-
-HAVE_DOT               = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
-# to run in parallel. When set to 0 doxygen will base this on the number of
-# processors available in the system. You can set it explicitly to a value
-# larger than 0 to get control over the balance between CPU load and processing
-# speed.
-# Minimum value: 0, maximum value: 32, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_NUM_THREADS        = 0
-
-# When you want a differently looking font n the dot files that doxygen
-# generates you can specify the font name using DOT_FONTNAME. You need to make
-# sure dot is able to find the font, which can be done by putting it in a
-# standard location or by setting the DOTFONTPATH environment variable or by
-# setting DOT_FONTPATH to the directory containing the font.
-# The default value is: Helvetica.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTNAME           = Helvetica
-
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
-# dot graphs.
-# Minimum value: 4, maximum value: 24, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTSIZE           = 10
-
-# By default doxygen will tell dot to use the default font as specified with
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
-# the path where dot can find it using this tag.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_FONTPATH           =
-
-# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
-# each documented class showing the direct and indirect inheritance relations.
-# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CLASS_GRAPH            = YES
-
-# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
-# graph for each documented class showing the direct and indirect implementation
-# dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-COLLABORATION_GRAPH    = YES
-
-# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GROUP_GRAPHS           = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LOOK               = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
-# class node. If there are many fields or methods and many nodes the graph may
-# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
-# number of items for each type to make the size more manageable. Set this to 0
-# for no limit. Note that the threshold may be exceeded by 50% before the limit
-# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
-# but if the number exceeds 15, the total amount of fields shown is limited to
-# 10.
-# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-UML_LIMIT_NUM_FIELDS   = 10
-
-# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
-# collaboration graphs will show the relations between templates and their
-# instances.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-TEMPLATE_RELATIONS     = NO
-
-# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
-# YES then doxygen will generate a graph for each documented file showing the
-# direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDE_GRAPH          = YES
-
-# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
-# set to YES then doxygen will generate a graph for each documented file showing
-# the direct and indirect include dependencies of the file with other documented
-# files.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INCLUDED_BY_GRAPH      = YES
-
-# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable call graphs for selected
-# functions only using the \callgraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALL_GRAPH             = NO
-
-# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
-# dependency graph for every global function or class method.
-#
-# Note that enabling this option will significantly increase the time of a run.
-# So in most cases it will be better to enable caller graphs for selected
-# functions only using the \callergraph command.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-CALLER_GRAPH           = NO
-
-# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
-# hierarchy of all classes instead of a textual one.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GRAPHICAL_HIERARCHY    = YES
-
-# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
-# dependencies a directory has on other directories in a graphical way. The
-# dependency relations are determined by the #include relations between the
-# files in the directories.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DIRECTORY_GRAPH        = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot.
-# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
-# to make the SVG files visible in IE 9+ (other browsers do not have this
-# requirement).
-# Possible values are: png, jpg, gif and svg.
-# The default value is: png.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_IMAGE_FORMAT       = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-#
-# Note that this requires a modern browser other than Internet Explorer. Tested
-# and working are Firefox, Chrome, Safari, and Opera.
-# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
-# the SVG files visible. Older versions of IE do not have SVG support.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-INTERACTIVE_SVG        = NO
-
-# The DOT_PATH tag can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_PATH               =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the \dotfile
-# command).
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOTFILE_DIRS           =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the \mscfile
-# command).
-
-MSCFILE_DIRS           =
-
-# The DIAFILE_DIRS tag can be used to specify one or more directories that
-# contain dia files that are included in the documentation (see the \diafile
-# command).
-
-DIAFILE_DIRS           =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
-# that will be shown in the graph. If the number of nodes in a graph becomes
-# larger than this value, doxygen will truncate the graph, which is visualized
-# by representing a node as a red box. Note that doxygen if the number of direct
-# children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
-# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-# Minimum value: 0, maximum value: 10000, default value: 50.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_GRAPH_MAX_NODES    = 50
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
-# generated by dot. A depth value of 3 means that only nodes reachable from the
-# root by following a path via at most 3 edges will be shown. Nodes that lay
-# further from the root node will be omitted. Note that setting this option to 1
-# or 2 may greatly reduce the computation time needed for large code bases. Also
-# note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-# Minimum value: 0, maximum value: 1000, default value: 0.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-MAX_DOT_GRAPH_DEPTH    = 0
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = NO
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10) support
-# this, this feature is disabled by default.
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_MULTI_TARGETS      = YES
-
-# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
-# explaining the meaning of the various boxes and arrows in the dot generated
-# graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
-# files that are used to generate the various graphs.
-# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_CLEANUP            = YES
diff --git a/media/libeffects/visualizer/Android.bp b/media/libeffects/visualizer/Android.bp
new file mode 100644
index 0000000..f6c585e
--- /dev/null
+++ b/media/libeffects/visualizer/Android.bp
@@ -0,0 +1,32 @@
+// Visualizer library
+cc_library_shared {
+    name: "libvisualizer",
+
+    vendor: true,
+
+    srcs: [
+        "EffectVisualizer.cpp",
+    ],
+
+    cflags: [
+        "-O2",
+        "-fvisibility=hidden",
+
+        "-DBUILD_FLOAT",
+        "-DSUPPORT_MC",
+
+        "-Wall",
+        "-Werror",
+    ],
+
+    shared_libs: [
+        "liblog",
+    ],
+
+    relative_install_path: "soundfx",
+
+    header_libs: [
+        "libaudioeffects",
+        "libaudioutils_headers",
+    ],
+}
diff --git a/media/libeffects/visualizer/Android.mk b/media/libeffects/visualizer/Android.mk
deleted file mode 100644
index 35e2f3d..0000000
--- a/media/libeffects/visualizer/Android.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-LOCAL_PATH:= $(call my-dir)
-
-# Visualizer library
-include $(CLEAR_VARS)
-
-LOCAL_VENDOR_MODULE := true
-LOCAL_SRC_FILES:= \
-	EffectVisualizer.cpp
-
-LOCAL_CFLAGS+= -O2 -fvisibility=hidden
-LOCAL_CFLAGS += -Wall -Werror
-LOCAL_CFLAGS += -DBUILD_FLOAT -DSUPPORT_MC
-
-LOCAL_SHARED_LIBRARIES := \
-	libcutils \
-	liblog \
-	libdl
-
-LOCAL_MODULE_RELATIVE_PATH := soundfx
-LOCAL_MODULE:= libvisualizer
-
-LOCAL_C_INCLUDES := \
-	$(call include-path-for, audio-effects) \
-	$(call include-path-for, audio-utils)
-
-
-LOCAL_HEADER_LIBRARIES += libhardware_headers
-include $(BUILD_SHARED_LIBRARY)
diff --git a/media/libmedia/IMediaPlayer.cpp b/media/libmedia/IMediaPlayer.cpp
index 20bc23d..c08d187 100644
--- a/media/libmedia/IMediaPlayer.cpp
+++ b/media/libmedia/IMediaPlayer.cpp
@@ -40,6 +40,7 @@
     SET_DATA_SOURCE_FD,
     SET_DATA_SOURCE_STREAM,
     SET_DATA_SOURCE_CALLBACK,
+    SET_DATA_SOURCE_RTP,
     SET_BUFFERING_SETTINGS,
     GET_BUFFERING_SETTINGS,
     PREPARE_ASYNC,
@@ -161,6 +162,15 @@
         return reply.readInt32();
     }
 
+    status_t setDataSource(const String8& rtpParams) {
+        Parcel data, reply;
+        data.writeInterfaceToken(IMediaPlayer::getInterfaceDescriptor());
+        data.writeString8(rtpParams);
+        remote()->transact(SET_DATA_SOURCE_RTP, data, &reply);
+
+        return reply.readInt32();
+    }
+
     // pass the buffered IGraphicBufferProducer to the media player service
     status_t setVideoSurfaceTexture(const sp<IGraphicBufferProducer>& bufferProducer)
     {
@@ -685,6 +695,12 @@
             }
             return NO_ERROR;
         }
+        case SET_DATA_SOURCE_RTP: {
+            CHECK_INTERFACE(IMediaPlayer, data, reply);
+            String8 rtpParams = data.readString8();
+            reply->writeInt32(setDataSource(rtpParams));
+            return NO_ERROR;
+        }
         case SET_VIDEO_SURFACETEXTURE: {
             CHECK_INTERFACE(IMediaPlayer, data, reply);
             sp<IGraphicBufferProducer> bufferProducer =
diff --git a/media/libmedia/include/media/IMediaPlayer.h b/media/libmedia/include/media/IMediaPlayer.h
index a4c0ec6..3548a1e 100644
--- a/media/libmedia/include/media/IMediaPlayer.h
+++ b/media/libmedia/include/media/IMediaPlayer.h
@@ -59,6 +59,7 @@
     virtual status_t        setDataSource(int fd, int64_t offset, int64_t length) = 0;
     virtual status_t        setDataSource(const sp<IStreamSource>& source) = 0;
     virtual status_t        setDataSource(const sp<IDataSource>& source) = 0;
+    virtual status_t        setDataSource(const String8& rtpParams) = 0;
     virtual status_t        setVideoSurfaceTexture(
                                     const sp<IGraphicBufferProducer>& bufferProducer) = 0;
     virtual status_t        getBufferingSettings(
diff --git a/media/libmedia/include/media/mediaplayer.h b/media/libmedia/include/media/mediaplayer.h
index 2335c5a..d0a8e38 100644
--- a/media/libmedia/include/media/mediaplayer.h
+++ b/media/libmedia/include/media/mediaplayer.h
@@ -60,6 +60,7 @@
     MEDIA_META_DATA         = 202,
     MEDIA_DRM_INFO          = 210,
     MEDIA_TIME_DISCONTINUITY = 211,
+    MEDIA_IMS_RX_NOTICE     = 300,
     MEDIA_AUDIO_ROUTING_CHANGED = 10000,
 };
 
@@ -217,6 +218,7 @@
 
             status_t        setDataSource(int fd, int64_t offset, int64_t length);
             status_t        setDataSource(const sp<IDataSource> &source);
+            status_t        setDataSource(const String8& rtpParams);
             status_t        setVideoSurfaceTexture(
                                     const sp<IGraphicBufferProducer>& bufferProducer);
             status_t        setListener(const sp<MediaPlayerListener>& listener);
diff --git a/media/libmedia/include/media/mediarecorder.h b/media/libmedia/include/media/mediarecorder.h
index 6e2d94d..fbcdb28 100644
--- a/media/libmedia/include/media/mediarecorder.h
+++ b/media/libmedia/include/media/mediarecorder.h
@@ -291,6 +291,8 @@
     bool                        mIsOutputFileSet;
     Mutex                       mLock;
     Mutex                       mNotifyLock;
+
+    output_format               mOutputFormat;
 };
 
 };  // namespace android
diff --git a/media/libmedia/mediaplayer.cpp b/media/libmedia/mediaplayer.cpp
index 1fadc94..1b89fc7 100644
--- a/media/libmedia/mediaplayer.cpp
+++ b/media/libmedia/mediaplayer.cpp
@@ -195,6 +195,22 @@
     return err;
 }
 
+status_t MediaPlayer::setDataSource(const String8& rtpParams)
+{
+    ALOGV("setDataSource(rtpParams)");
+    status_t err = UNKNOWN_ERROR;
+    const sp<IMediaPlayerService> service(getMediaPlayerService());
+    if (service != 0) {
+        sp<IMediaPlayer> player(service->create(this, mAudioSessionId));
+        if ((NO_ERROR != doSetRetransmitEndpoint(player)) ||
+            (NO_ERROR != player->setDataSource(rtpParams))) {
+            player.clear();
+        }
+        err = attachNewPlayer(player);
+    }
+    return err;
+}
+
 status_t MediaPlayer::invoke(const Parcel& request, Parcel *reply)
 {
     Mutex::Autolock _l(mLock);
@@ -943,6 +959,9 @@
     case MEDIA_META_DATA:
         ALOGV("Received timed metadata message");
         break;
+    case MEDIA_IMS_RX_NOTICE:
+        ALOGV("Received IMS Rx notice message");
+        break;
     default:
         ALOGV("unrecognized message: (%d, %d, %d)", msg, ext1, ext2);
         break;
diff --git a/media/libmedia/mediarecorder.cpp b/media/libmedia/mediarecorder.cpp
index 70655d5..d9d1f25 100644
--- a/media/libmedia/mediarecorder.cpp
+++ b/media/libmedia/mediarecorder.cpp
@@ -244,6 +244,7 @@
         mCurrentState = MEDIA_RECORDER_ERROR;
         return ret;
     }
+    mOutputFormat = (output_format)of;
     mCurrentState = MEDIA_RECORDER_DATASOURCE_CONFIGURED;
     return ret;
 }
@@ -479,6 +480,13 @@
                            (MEDIA_RECORDER_PREPARED |
                             MEDIA_RECORDER_RECORDING |
                             MEDIA_RECORDER_ERROR));
+
+    // For RTP video, parameter should be set dynamically.
+    if (isInvalidState) {
+        if (mCurrentState == MEDIA_RECORDER_RECORDING &&
+            mOutputFormat == OUTPUT_FORMAT_RTP_AVP)
+            isInvalidState = false;
+    }
     if (isInvalidState) {
         ALOGE("setParameters is called in an invalid state: %d", mCurrentState);
         return INVALID_OPERATION;
@@ -737,6 +745,7 @@
     mIsAudioEncoderSet = false;
     mIsVideoEncoderSet = false;
     mIsOutputFileSet   = false;
+    mOutputFormat      = OUTPUT_FORMAT_DEFAULT;
 }
 
 // Release should be OK in any state
diff --git a/media/libmediaplayerservice/Android.bp b/media/libmediaplayerservice/Android.bp
index 5301f5c..902d846 100644
--- a/media/libmediaplayerservice/Android.bp
+++ b/media/libmediaplayerservice/Android.bp
@@ -16,6 +16,8 @@
         "android.hardware.media.c2@1.0",
         "android.hardware.media.omx@1.0",
         "libbase",
+        "libandroid",
+        "libandroid_net",
         "libaudioclient",
         "libbinder",
         "libcamera_client",
diff --git a/media/libmediaplayerservice/MediaPlayerService.cpp b/media/libmediaplayerservice/MediaPlayerService.cpp
index 42a0622..b7313b5 100644
--- a/media/libmediaplayerservice/MediaPlayerService.cpp
+++ b/media/libmediaplayerservice/MediaPlayerService.cpp
@@ -1062,6 +1062,17 @@
     return mStatus = setDataSource_post(p, p->setDataSource(dataSource));
 }
 
+status_t MediaPlayerService::Client::setDataSource(
+        const String8& rtpParams) {
+    player_type playerType = NU_PLAYER;
+    sp<MediaPlayerBase> p = setDataSource_pre(playerType);
+    if (p == NULL) {
+        return NO_INIT;
+    }
+    // now set data source
+    return mStatus = setDataSource_post(p, p->setDataSource(rtpParams));
+}
+
 void MediaPlayerService::Client::disconnectNativeWindow_l() {
     if (mConnectedWindow != NULL) {
         status_t err = nativeWindowDisconnect(
diff --git a/media/libmediaplayerservice/MediaPlayerService.h b/media/libmediaplayerservice/MediaPlayerService.h
index 6431ca1..3d596a5 100644
--- a/media/libmediaplayerservice/MediaPlayerService.h
+++ b/media/libmediaplayerservice/MediaPlayerService.h
@@ -368,6 +368,7 @@
 
         virtual status_t        setDataSource(const sp<IStreamSource> &source);
         virtual status_t        setDataSource(const sp<IDataSource> &source);
+        virtual status_t        setDataSource(const String8& rtpParams);
 
 
         sp<MediaPlayerBase>     setDataSource_pre(player_type playerType);
diff --git a/media/libmediaplayerservice/StagefrightRecorder.cpp b/media/libmediaplayerservice/StagefrightRecorder.cpp
index cf7f423..c6272c8 100644
--- a/media/libmediaplayerservice/StagefrightRecorder.cpp
+++ b/media/libmediaplayerservice/StagefrightRecorder.cpp
@@ -44,6 +44,7 @@
 #include <media/stagefright/CameraSourceTimeLapse.h>
 #include <media/stagefright/MPEG2TSWriter.h>
 #include <media/stagefright/MPEG4Writer.h>
+#include <media/stagefright/MediaCodecConstants.h>
 #include <media/stagefright/MediaDefs.h>
 #include <media/stagefright/MetaData.h>
 #include <media/stagefright/MediaCodecSource.h>
@@ -117,6 +118,11 @@
       mAudioSource((audio_source_t)AUDIO_SOURCE_CNT), // initialize with invalid value
       mPrivacySensitive(PRIVACY_SENSITIVE_DEFAULT),
       mVideoSource(VIDEO_SOURCE_LIST_END),
+      mRTPCVOExtMap(-1),
+      mRTPCVODegrees(0),
+      mRTPSockDscp(0),
+      mRTPSockNetwork(0),
+      mLastSeqNo(0),
       mStarted(false),
       mSelectedDeviceId(AUDIO_PORT_HANDLE_NONE),
       mDeviceCallbackEnabled(false),
@@ -567,6 +573,30 @@
     // range that a specific encoder supports. The mismatch between the
     // the target and requested bit rate will NOT be treated as an error.
     mVideoBitRate = bitRate;
+
+    // A new bitrate(TMMBR) should be applied on runtime as well if OutputFormat is RTP_AVP
+    if (mOutputFormat == OUTPUT_FORMAT_RTP_AVP && mStarted && mPauseStartTimeUs == 0) {
+        // Regular I frames may overload the network so we reduce the bitrate to allow
+        // margins for the I frame overruns.
+        // Still send requested bitrate (TMMBR) in the reply (TMMBN).
+        const float coefficient = 0.8f;
+        mVideoBitRate = (bitRate * coefficient) / 1000 * 1000;
+        mVideoEncoderSource->setEncodingBitrate(mVideoBitRate);
+        ARTPWriter* rtpWriter  = static_cast<ARTPWriter*>(mWriter.get());
+        rtpWriter->setTMMBNInfo(mOpponentID, bitRate);
+    }
+
+    return OK;
+}
+
+status_t StagefrightRecorder::setParamVideoBitRateMode(int32_t bitRateMode) {
+    ALOGV("setParamVideoBitRateMode: %d", bitRateMode);
+    // TODO: clarify what bitrate mode of -1 is as these start from 0
+    if (bitRateMode < -1) {
+        ALOGE("Unsupported video bitrate mode: %d", bitRateMode);
+        return BAD_VALUE;
+    }
+    mVideoBitRateMode = bitRateMode;
     return OK;
 }
 
@@ -776,6 +806,105 @@
     return OK;
 }
 
+status_t StagefrightRecorder::setParamRtpLocalIp(const String8 &localIp) {
+    ALOGV("setParamVideoLocalIp: %s", localIp.string());
+
+    mLocalIp.setTo(localIp.string());
+    return OK;
+}
+
+status_t StagefrightRecorder::setParamRtpLocalPort(int32_t localPort) {
+    ALOGV("setParamVideoLocalPort: %d", localPort);
+
+    mLocalPort = localPort;
+    return OK;
+}
+
+status_t StagefrightRecorder::setParamRtpRemoteIp(const String8 &remoteIp) {
+    ALOGV("setParamVideoRemoteIp: %s", remoteIp.string());
+
+    mRemoteIp.setTo(remoteIp.string());
+    return OK;
+}
+
+status_t StagefrightRecorder::setParamRtpRemotePort(int32_t remotePort) {
+    ALOGV("setParamVideoRemotePort: %d", remotePort);
+
+    mRemotePort = remotePort;
+    return OK;
+}
+
+status_t StagefrightRecorder::setParamSelfID(int32_t selfID) {
+    ALOGV("setParamSelfID: %x", selfID);
+
+    mSelfID = selfID;
+    return OK;
+}
+
+status_t StagefrightRecorder::setParamVideoOpponentID(int32_t opponentID) {
+    mOpponentID = opponentID;
+    return OK;
+}
+
+status_t StagefrightRecorder::setParamPayloadType(int32_t payloadType) {
+    ALOGV("setParamPayloadType: %d", payloadType);
+
+    mPayloadType = payloadType;
+
+    if (mStarted && mOutputFormat == OUTPUT_FORMAT_RTP_AVP) {
+        mWriter->updatePayloadType(mPayloadType);
+    }
+
+    return OK;
+}
+
+status_t StagefrightRecorder::setRTPCVOExtMap(int32_t extmap) {
+    ALOGV("setRtpCvoExtMap: %d", extmap);
+
+    mRTPCVOExtMap = extmap;
+    return OK;
+}
+
+status_t StagefrightRecorder::setRTPCVODegrees(int32_t cvoDegrees) {
+    Mutex::Autolock autolock(mLock);
+    ALOGV("setRtpCvoDegrees: %d", cvoDegrees);
+
+    mRTPCVODegrees = cvoDegrees;
+
+    if (mStarted && mOutputFormat == OUTPUT_FORMAT_RTP_AVP) {
+        mWriter->updateCVODegrees(mRTPCVODegrees);
+    }
+
+    return OK;
+}
+
+status_t StagefrightRecorder::setParamRtpDscp(int32_t dscp) {
+    ALOGV("setParamRtpDscp: %d", dscp);
+
+    mRTPSockDscp = dscp;
+    return OK;
+}
+
+status_t StagefrightRecorder::setSocketNetwork(int64_t networkHandle) {
+    ALOGV("setSocketNetwork: %llu", (unsigned long long) networkHandle);
+
+    mRTPSockNetwork = networkHandle;
+    if (mStarted && mOutputFormat == OUTPUT_FORMAT_RTP_AVP) {
+        mWriter->updateSocketNetwork(mRTPSockNetwork);
+    }
+    return OK;
+}
+
+status_t StagefrightRecorder::requestIDRFrame() {
+    status_t ret = BAD_VALUE;
+    if (mVideoEncoderSource != NULL) {
+        ret = mVideoEncoderSource->requestIDRFrame();
+    } else {
+        ALOGV("requestIDRFrame: Encoder not ready");
+    }
+    return ret;
+}
+
 status_t StagefrightRecorder::setParameter(
         const String8 &key, const String8 &value) {
     ALOGV("setParameter: key (%s) => value (%s)", key.string(), value.string());
@@ -844,6 +973,11 @@
         if (safe_strtoi32(value.string(), &video_bitrate)) {
             return setParamVideoEncodingBitRate(video_bitrate);
         }
+    } else if (key == "video-param-bitrate-mode") {
+        int32_t video_bitrate_mode;
+        if (safe_strtoi32(value.string(), &video_bitrate_mode)) {
+            return setParamVideoBitRateMode(video_bitrate_mode);
+        }
     } else if (key == "video-param-rotation-angle-degrees") {
         int32_t degrees;
         if (safe_strtoi32(value.string(), &degrees)) {
@@ -884,6 +1018,61 @@
         if (safe_strtod(value.string(), &fps)) {
             return setParamCaptureFps(fps);
         }
+    } else if (key == "rtp-param-local-ip") {
+        return setParamRtpLocalIp(value);
+    } else if (key == "rtp-param-local-port") {
+        int32_t localPort;
+        if (safe_strtoi32(value.string(), &localPort)) {
+            return setParamRtpLocalPort(localPort);
+        }
+    } else if (key == "rtp-param-remote-ip") {
+        return setParamRtpRemoteIp(value);
+    } else if (key == "rtp-param-remote-port") {
+        int32_t remotePort;
+        if (safe_strtoi32(value.string(), &remotePort)) {
+            return setParamRtpRemotePort(remotePort);
+        }
+    } else if (key == "rtp-param-self-id") {
+        int32_t selfID;
+        int64_t temp;
+        if (safe_strtoi64(value.string(), &temp)) {
+            selfID = static_cast<int32_t>(temp);
+            return setParamSelfID(selfID);
+        }
+    } else if (key == "rtp-param-opponent-id") {
+        int32_t opnId;
+        int64_t temp;
+        if (safe_strtoi64(value.string(), &temp)) {
+            opnId = static_cast<int32_t>(temp);
+            return setParamVideoOpponentID(opnId);
+        }
+    } else if (key == "rtp-param-payload-type") {
+        int32_t payloadType;
+        if (safe_strtoi32(value.string(), &payloadType)) {
+            return setParamPayloadType(payloadType);
+        }
+    } else if (key == "rtp-param-ext-cvo-extmap") {
+        int32_t extmap;
+        if (safe_strtoi32(value.string(), &extmap)) {
+            return setRTPCVOExtMap(extmap);
+        }
+    } else if (key == "rtp-param-ext-cvo-degrees") {
+        int32_t degrees;
+        if (safe_strtoi32(value.string(), &degrees)) {
+            return setRTPCVODegrees(degrees);
+        }
+    } else if (key == "video-param-request-i-frame") {
+        return requestIDRFrame();
+    } else if (key == "rtp-param-set-socket-dscp") {
+        int32_t dscp;
+        if (safe_strtoi32(value.string(), &dscp)) {
+            return setParamRtpDscp(dscp);
+        }
+    } else if (key == "rtp-param-set-socket-network") {
+        int64_t networkHandle;
+        if (safe_strtoi64(value.string(), &networkHandle)) {
+            return setSocketNetwork(networkHandle);
+        }
     } else {
         ALOGE("setParameter: failed to find key %s", key.string());
     }
@@ -1050,6 +1239,17 @@
             sp<MetaData> meta = new MetaData;
             int64_t startTimeUs = systemTime() / 1000;
             meta->setInt64(kKeyTime, startTimeUs);
+            meta->setInt32(kKeySelfID, mSelfID);
+            meta->setInt32(kKeyPayloadType, mPayloadType);
+            meta->setInt64(kKeySocketNetwork, mRTPSockNetwork);
+            if (mRTPCVOExtMap > 0) {
+                meta->setInt32(kKeyRtpExtMap, mRTPCVOExtMap);
+                meta->setInt32(kKeyRtpCvoDegrees, mRTPCVODegrees);
+            }
+            if (mRTPSockDscp > 0) {
+                meta->setInt32(kKeyRtpDscp, mRTPSockDscp);
+            }
+
             status = mWriter->start(meta.get());
             break;
         }
@@ -1330,7 +1530,7 @@
         mVideoEncoderSource = source;
     }
 
-    mWriter = new ARTPWriter(mOutputFd);
+    mWriter = new ARTPWriter(mOutputFd, mLocalIp, mLocalPort, mRemoteIp, mRemotePort, mLastSeqNo);
     mWriter->addSource(source);
     mWriter->setListener(mListener);
 
@@ -1767,6 +1967,10 @@
         format->setInt32("stride", stride);
         format->setInt32("slice-height", sliceHeight);
         format->setInt32("color-format", colorFormat);
+        if (mOutputFormat == OUTPUT_FORMAT_RTP_AVP) {
+            // This indicates that a raw image provided to encoder needs to be rotated.
+            format->setInt32("rotation-degrees", mRotationDegrees);
+        }
     } else {
         format->setInt32("width", mVideoWidth);
         format->setInt32("height", mVideoHeight);
@@ -1785,6 +1989,7 @@
     }
 
     format->setInt32("bitrate", mVideoBitRate);
+    format->setInt32("bitrate-mode", mVideoBitRateMode);
     format->setInt32("frame-rate", mFrameRate);
     format->setInt32("i-frame-interval", mIFramesIntervalSec);
 
@@ -2129,6 +2334,7 @@
 
     if (mWriter != NULL) {
         err = mWriter->stop();
+        mLastSeqNo = mWriter->getSequenceNum();
         mWriter.clear();
     }
 
@@ -2205,6 +2411,8 @@
     mVideoHeight   = 144;
     mFrameRate     = -1;
     mVideoBitRate  = 192000;
+    // Following MediaCodec's default
+    mVideoBitRateMode = BITRATE_MODE_VBR;
     mSampleRate    = 8000;
     mAudioChannels = 1;
     mAudioBitRate  = 12200;
diff --git a/media/libmediaplayerservice/StagefrightRecorder.h b/media/libmediaplayerservice/StagefrightRecorder.h
index a725bee..0362edd 100644
--- a/media/libmediaplayerservice/StagefrightRecorder.h
+++ b/media/libmediaplayerservice/StagefrightRecorder.h
@@ -119,6 +119,7 @@
     int32_t mVideoWidth, mVideoHeight;
     int32_t mFrameRate;
     int32_t mVideoBitRate;
+    int32_t mVideoBitRateMode;
     int32_t mAudioBitRate;
     int32_t mAudioChannels;
     int32_t mSampleRate;
@@ -138,6 +139,18 @@
     int32_t mLongitudex10000;
     int32_t mStartTimeOffsetMs;
     int32_t mTotalBitRate;
+    String8 mLocalIp;
+    String8 mRemoteIp;
+    int32_t mLocalPort;
+    int32_t mRemotePort;
+    int32_t mSelfID;
+    int32_t mOpponentID;
+    int32_t mPayloadType;
+    int32_t mRTPCVOExtMap;
+    int32_t mRTPCVODegrees;
+    int32_t mRTPSockDscp;
+    int64_t mRTPSockNetwork;
+    uint32_t mLastSeqNo;
 
     int64_t mDurationRecordedUs;
     int64_t mStartedRecordingUs;
@@ -205,6 +218,7 @@
     status_t setParamCaptureFpsEnable(int32_t timeLapseEnable);
     status_t setParamCaptureFps(double fps);
     status_t setParamVideoEncodingBitRate(int32_t bitRate);
+    status_t setParamVideoBitRateMode(int32_t bitRateMode);
     status_t setParamVideoIFramesInterval(int32_t seconds);
     status_t setParamVideoEncoderProfile(int32_t profile);
     status_t setParamVideoEncoderLevel(int32_t level);
@@ -219,6 +233,18 @@
     status_t setParamMovieTimeScale(int32_t timeScale);
     status_t setParamGeoDataLongitude(int64_t longitudex10000);
     status_t setParamGeoDataLatitude(int64_t latitudex10000);
+    status_t setParamRtpLocalIp(const String8 &localIp);
+    status_t setParamRtpLocalPort(int32_t localPort);
+    status_t setParamRtpRemoteIp(const String8 &remoteIp);
+    status_t setParamRtpRemotePort(int32_t remotePort);
+    status_t setParamSelfID(int32_t selfID);
+    status_t setParamVideoOpponentID(int32_t opponentID);
+    status_t setParamPayloadType(int32_t payloadType);
+    status_t setRTPCVOExtMap(int32_t extmap);
+    status_t setRTPCVODegrees(int32_t cvoDegrees);
+    status_t setParamRtpDscp(int32_t dscp);
+    status_t setSocketNetwork(int64_t networkHandle);
+    status_t requestIDRFrame();
     void clipVideoBitRate();
     void clipVideoFrameRate();
     void clipVideoFrameWidth();
diff --git a/media/libmediaplayerservice/include/MediaPlayerInterface.h b/media/libmediaplayerservice/include/MediaPlayerInterface.h
index 436cb31..1b5cb4b 100644
--- a/media/libmediaplayerservice/include/MediaPlayerInterface.h
+++ b/media/libmediaplayerservice/include/MediaPlayerInterface.h
@@ -183,6 +183,10 @@
         return INVALID_OPERATION;
     }
 
+    virtual status_t    setDataSource(const String8& /* rtpParams */) {
+        return INVALID_OPERATION;
+    }
+
     // pass the buffered IGraphicBufferProducer to the media player service
     virtual status_t    setVideoSurfaceTexture(
                                 const sp<IGraphicBufferProducer>& bufferProducer) = 0;
diff --git a/media/libmediaplayerservice/nuplayer/AWakeLock.cpp b/media/libmediaplayerservice/nuplayer/AWakeLock.cpp
index 684ba2e..7bee002 100644
--- a/media/libmediaplayerservice/nuplayer/AWakeLock.cpp
+++ b/media/libmediaplayerservice/nuplayer/AWakeLock.cpp
@@ -52,18 +52,19 @@
             if (binder == NULL) {
                 ALOGW("could not get the power manager service");
             } else {
-                mPowerManager = interface_cast<IPowerManager>(binder);
+                mPowerManager = interface_cast<os::IPowerManager>(binder);
                 binder->linkToDeath(mDeathRecipient);
             }
         }
         if (mPowerManager != NULL) {
             sp<IBinder> binder = new BBinder();
             int64_t token = IPCThreadState::self()->clearCallingIdentity();
-            status_t status = mPowerManager->acquireWakeLock(
-                    POWERMANAGER_PARTIAL_WAKE_LOCK,
-                    binder, String16("AWakeLock"), String16("media"));
+            binder::Status status = mPowerManager->acquireWakeLock(
+                    binder, POWERMANAGER_PARTIAL_WAKE_LOCK,
+                    String16("AWakeLock"), String16("media"),
+                    {} /* workSource */, {} /* historyTag */);
             IPCThreadState::self()->restoreCallingIdentity(token);
-            if (status == NO_ERROR) {
+            if (status.isOk()) {
                 mWakeLockToken = binder;
                 mWakeLockCount++;
                 return true;
diff --git a/media/libmediaplayerservice/nuplayer/AWakeLock.h b/media/libmediaplayerservice/nuplayer/AWakeLock.h
index 323e7d7..8aa3b41 100644
--- a/media/libmediaplayerservice/nuplayer/AWakeLock.h
+++ b/media/libmediaplayerservice/nuplayer/AWakeLock.h
@@ -18,7 +18,7 @@
 #define A_WAKELOCK_H_
 
 #include <media/stagefright/foundation/ABase.h>
-#include <powermanager/IPowerManager.h>
+#include <android/os/IPowerManager.h>
 #include <utils/RefBase.h>
 
 namespace android {
@@ -37,7 +37,7 @@
     virtual ~AWakeLock();
 
 private:
-    sp<IPowerManager> mPowerManager;
+    sp<os::IPowerManager> mPowerManager;
     sp<IBinder>       mWakeLockToken;
     uint32_t          mWakeLockCount;
 
diff --git a/media/libmediaplayerservice/nuplayer/Android.bp b/media/libmediaplayerservice/nuplayer/Android.bp
index 32c97cf..7206eab 100644
--- a/media/libmediaplayerservice/nuplayer/Android.bp
+++ b/media/libmediaplayerservice/nuplayer/Android.bp
@@ -14,6 +14,7 @@
         "NuPlayerRenderer.cpp",
         "NuPlayerStreamListener.cpp",
         "RTSPSource.cpp",
+        "RTPSource.cpp",
         "StreamingSource.cpp",
     ],
 
@@ -30,6 +31,7 @@
         "frameworks/av/media/libstagefright/mpeg2ts",
         "frameworks/av/media/libstagefright/rtsp",
         "frameworks/av/media/libstagefright/timedtext",
+        "frameworks/native/include/android",
     ],
 
     cflags: [
@@ -46,6 +48,8 @@
     },
 
     shared_libs: [
+        "libandroid",
+        "libandroid_net",
         "libbinder",
         "libdatasource",
         "libui",
diff --git a/media/libmediaplayerservice/nuplayer/NuPlayer.cpp b/media/libmediaplayerservice/nuplayer/NuPlayer.cpp
index c1c4b55..4e7daa5 100644
--- a/media/libmediaplayerservice/nuplayer/NuPlayer.cpp
+++ b/media/libmediaplayerservice/nuplayer/NuPlayer.cpp
@@ -31,6 +31,7 @@
 #include "NuPlayerDriver.h"
 #include "NuPlayerRenderer.h"
 #include "NuPlayerSource.h"
+#include "RTPSource.h"
 #include "RTSPSource.h"
 #include "StreamingSource.h"
 #include "GenericSource.h"
@@ -368,6 +369,18 @@
     return err;
 }
 
+void NuPlayer::setDataSourceAsync(const String8& rtpParams) {
+    ALOGD("setDataSourceAsync for RTP = %s", rtpParams.string());
+    sp<AMessage> msg = new AMessage(kWhatSetDataSource, this);
+
+    sp<AMessage> notify = new AMessage(kWhatSourceNotify, this);
+    sp<Source> source = new RTPSource(notify, rtpParams);
+
+    msg->setObject("source", source);
+    msg->post();
+    mDataSourceType = DATA_SOURCE_TYPE_RTP;
+}
+
 void NuPlayer::prepareAsync() {
     ALOGV("prepareAsync");
 
@@ -1915,6 +1928,11 @@
 
     format->setInt32("priority", 0 /* realtime */);
 
+    if (mDataSourceType == DATA_SOURCE_TYPE_RTP) {
+        ALOGV("instantiateDecoder: set decoder error free on stream corrupt.");
+        format->setInt32("corrupt-free", true);
+    }
+
     if (!audio) {
         AString mime;
         CHECK(format->findString("mime", &mime));
@@ -2715,6 +2733,14 @@
             break;
         }
 
+        case Source::kWhatIMSRxNotice:
+        {
+            sp<AMessage> IMSRxNotice;
+            CHECK(msg->findMessage("message", &IMSRxNotice));
+            sendIMSRxNotice(IMSRxNotice);
+            break;
+        }
+
         default:
             TRESPASS();
     }
@@ -2817,11 +2843,53 @@
     }
 }
 
+void NuPlayer::sendIMSRxNotice(const sp<AMessage> &msg) {
+    int32_t payloadType;
+
+    CHECK(msg->findInt32("payload-type", &payloadType));
+
+    Parcel in;
+    in.writeInt32(payloadType);
+
+    switch (payloadType) {
+        case NuPlayer::RTPSource::RTCP_TSFB:   // RTCP TSFB
+        case NuPlayer::RTPSource::RTCP_PSFB:   // RTCP PSFB
+        case NuPlayer::RTPSource::RTP_AUTODOWN:
+        {
+            int32_t feedbackType, id;
+            CHECK(msg->findInt32("feedback-type", &feedbackType));
+            CHECK(msg->findInt32("sender", &id));
+            in.writeInt32(feedbackType);
+            in.writeInt32(id);
+            if (payloadType == NuPlayer::RTPSource::RTCP_TSFB) {
+                int32_t bitrate;
+                CHECK(msg->findInt32("bit-rate", &bitrate));
+                in.writeInt32(bitrate);
+            }
+            break;
+        }
+        case NuPlayer::RTPSource::RTP_CVO:
+        {
+            int32_t cvo;
+            CHECK(msg->findInt32("cvo", &cvo));
+            in.writeInt32(cvo);
+            break;
+        }
+        default:
+        break;
+    }
+
+    notifyListener(MEDIA_IMS_RX_NOTICE, 0, 0, &in);
+}
+
 const char *NuPlayer::getDataSourceType() {
     switch (mDataSourceType) {
         case DATA_SOURCE_TYPE_HTTP_LIVE:
             return "HTTPLive";
 
+        case DATA_SOURCE_TYPE_RTP:
+            return "RTP";
+
         case DATA_SOURCE_TYPE_RTSP:
             return "RTSP";
 
diff --git a/media/libmediaplayerservice/nuplayer/NuPlayer.h b/media/libmediaplayerservice/nuplayer/NuPlayer.h
index ef4354c..0105248 100644
--- a/media/libmediaplayerservice/nuplayer/NuPlayer.h
+++ b/media/libmediaplayerservice/nuplayer/NuPlayer.h
@@ -51,6 +51,8 @@
 
     void setDataSourceAsync(const sp<DataSource> &source);
 
+    void setDataSourceAsync(const String8& rtpParams);
+
     status_t getBufferingSettings(BufferingSettings* buffering /* nonnull */);
     status_t setBufferingSettings(const BufferingSettings& buffering);
 
@@ -117,6 +119,7 @@
     struct GenericSource;
     struct HTTPLiveSource;
     struct Renderer;
+    struct RTPSource;
     struct RTSPSource;
     struct StreamingSource;
     struct Action;
@@ -257,6 +260,7 @@
     typedef enum {
         DATA_SOURCE_TYPE_NONE,
         DATA_SOURCE_TYPE_HTTP_LIVE,
+        DATA_SOURCE_TYPE_RTP,
         DATA_SOURCE_TYPE_RTSP,
         DATA_SOURCE_TYPE_GENERIC_URL,
         DATA_SOURCE_TYPE_GENERIC_FD,
@@ -334,6 +338,7 @@
     void sendSubtitleData(const sp<ABuffer> &buffer, int32_t baseIndex);
     void sendTimedMetaData(const sp<ABuffer> &buffer);
     void sendTimedTextData(const sp<ABuffer> &buffer);
+    void sendIMSRxNotice(const sp<AMessage> &msg);
 
     void writeTrackInfo(Parcel* reply, const sp<AMessage>& format) const;
 
diff --git a/media/libmediaplayerservice/nuplayer/NuPlayerDecoder.cpp b/media/libmediaplayerservice/nuplayer/NuPlayerDecoder.cpp
index f734439..8628edc 100644
--- a/media/libmediaplayerservice/nuplayer/NuPlayerDecoder.cpp
+++ b/media/libmediaplayerservice/nuplayer/NuPlayerDecoder.cpp
@@ -1050,7 +1050,7 @@
         uint32_t flags = 0;
         CHECK(buffer->meta()->findInt64("timeUs", &timeUs));
 
-        int32_t eos, csd;
+        int32_t eos, csd, cvo;
         // we do not expect SYNCFRAME for decoder
         if (buffer->meta()->findInt32("eos", &eos) && eos) {
             flags |= MediaCodec::BUFFER_FLAG_EOS;
@@ -1058,6 +1058,24 @@
             flags |= MediaCodec::BUFFER_FLAG_CODECCONFIG;
         }
 
+        if (buffer->meta()->findInt32("cvo", (int32_t*)&cvo)) {
+            ALOGV("[%s] cvo(%d) found at %lld us", mComponentName.c_str(), cvo, (long long)timeUs);
+            switch (cvo) {
+                case 0:
+                    codecBuffer->meta()->setInt32("cvo", MediaCodec::CVO_DEGREE_0);
+                    break;
+                case 1:
+                    codecBuffer->meta()->setInt32("cvo", MediaCodec::CVO_DEGREE_90);
+                    break;
+                case 2:
+                    codecBuffer->meta()->setInt32("cvo", MediaCodec::CVO_DEGREE_180);
+                    break;
+                case 3:
+                    codecBuffer->meta()->setInt32("cvo", MediaCodec::CVO_DEGREE_270);
+                    break;
+            }
+        }
+
         // Modular DRM
         MediaBufferBase *mediaBuf = NULL;
         NuPlayerDrm::CryptoInfo *cryptInfo = NULL;
diff --git a/media/libmediaplayerservice/nuplayer/NuPlayerDriver.cpp b/media/libmediaplayerservice/nuplayer/NuPlayerDriver.cpp
index 24afd43..039a56b 100644
--- a/media/libmediaplayerservice/nuplayer/NuPlayerDriver.cpp
+++ b/media/libmediaplayerservice/nuplayer/NuPlayerDriver.cpp
@@ -215,6 +215,26 @@
     return mAsyncResult;
 }
 
+status_t NuPlayerDriver::setDataSource(const String8& rtpParams) {
+    ALOGV("setDataSource(%p) rtp source", this);
+    Mutex::Autolock autoLock(mLock);
+
+    if (mState != STATE_IDLE) {
+        return INVALID_OPERATION;
+    }
+
+    mState = STATE_SET_DATASOURCE_PENDING;
+
+    mPlayer->setDataSourceAsync(rtpParams);
+
+    while (mState == STATE_SET_DATASOURCE_PENDING) {
+        mCondition.wait(mLock);
+    }
+
+    return mAsyncResult;
+}
+
+
 status_t NuPlayerDriver::setVideoSurfaceTexture(
         const sp<IGraphicBufferProducer> &bufferProducer) {
     ALOGV("setVideoSurfaceTexture(%p)", this);
diff --git a/media/libmediaplayerservice/nuplayer/NuPlayerDriver.h b/media/libmediaplayerservice/nuplayer/NuPlayerDriver.h
index 7001f4a..6557f0f 100644
--- a/media/libmediaplayerservice/nuplayer/NuPlayerDriver.h
+++ b/media/libmediaplayerservice/nuplayer/NuPlayerDriver.h
@@ -43,6 +43,8 @@
 
     virtual status_t setDataSource(const sp<DataSource>& dataSource);
 
+    virtual status_t setDataSource(const String8& rtpParams);
+
     virtual status_t setVideoSurfaceTexture(
             const sp<IGraphicBufferProducer> &bufferProducer);
 
diff --git a/media/libmediaplayerservice/nuplayer/NuPlayerSource.h b/media/libmediaplayerservice/nuplayer/NuPlayerSource.h
index f137c52..eb39870 100644
--- a/media/libmediaplayerservice/nuplayer/NuPlayerSource.h
+++ b/media/libmediaplayerservice/nuplayer/NuPlayerSource.h
@@ -58,6 +58,7 @@
         kWhatInstantiateSecureDecoders,
         // Modular DRM
         kWhatDrmInfo,
+        kWhatIMSRxNotice,
     };
 
     // The provides message is used to notify the player about various
diff --git a/media/libmediaplayerservice/nuplayer/RTPSource.cpp b/media/libmediaplayerservice/nuplayer/RTPSource.cpp
new file mode 100644
index 0000000..a6601cd
--- /dev/null
+++ b/media/libmediaplayerservice/nuplayer/RTPSource.cpp
@@ -0,0 +1,774 @@
+/*
+ * Copyright (C) 2010 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//#define LOG_NDEBUG 0
+#define LOG_TAG "RTPSource"
+#include <utils/Log.h>
+
+#include "RTPSource.h"
+
+
+
+
+#include <media/stagefright/MediaDefs.h>
+#include <media/stagefright/MetaData.h>
+#include <string.h>
+
+namespace android {
+
+const int64_t kNearEOSTimeoutUs = 2000000ll; // 2 secs
+static int32_t kMaxAllowedStaleAccessUnits = 20;
+
+NuPlayer::RTPSource::RTPSource(
+        const sp<AMessage> &notify,
+        const String8& rtpParams)
+    : Source(notify),
+      mRTPParams(rtpParams),
+      mFlags(0),
+      mState(DISCONNECTED),
+      mFinalResult(OK),
+      mBuffering(false),
+      mInPreparationPhase(true),
+      mRTPConn(new ARTPConnection(ARTPConnection::kViLTEConnection)),
+      mEOSTimeoutAudio(0),
+      mEOSTimeoutVideo(0),
+      mLastCVOUpdated(-1) {
+      ALOGD("RTPSource initialized with rtpParams=%s", rtpParams.string());
+}
+
+NuPlayer::RTPSource::~RTPSource() {
+    if (mLooper != NULL) {
+        mLooper->unregisterHandler(id());
+        mLooper->unregisterHandler(mRTPConn->id());
+        mLooper->stop();
+    }
+}
+
+status_t NuPlayer::RTPSource::getBufferingSettings(
+            BufferingSettings* buffering /* nonnull */) {
+    Mutex::Autolock _l(mBufferingSettingsLock);
+    *buffering = mBufferingSettings;
+    return OK;
+}
+
+status_t NuPlayer::RTPSource::setBufferingSettings(const BufferingSettings& buffering) {
+    Mutex::Autolock _l(mBufferingSettingsLock);
+    mBufferingSettings = buffering;
+    return OK;
+}
+
+void NuPlayer::RTPSource::prepareAsync() {
+    if (mLooper == NULL) {
+        mLooper = new ALooper;
+        mLooper->setName("rtp");
+        mLooper->start();
+
+        mLooper->registerHandler(this);
+        mLooper->registerHandler(mRTPConn);
+    }
+
+    CHECK_EQ(mState, (int)DISCONNECTED);
+    mState = CONNECTING;
+
+    setParameters(mRTPParams);
+
+    TrackInfo *info = NULL;
+    unsigned i;
+    for (i = 0; i < mTracks.size(); i++) {
+        info = &mTracks.editItemAt(i);
+
+        if (info == NULL)
+            break;
+
+        AString sdp;
+        ASessionDescription::SDPStringFactory(sdp, info->mLocalIp,
+                info->mIsAudio, info->mLocalPort, info->mPayloadType, info->mAS, info->mCodecName,
+                NULL, info->mWidth, info->mHeight, info->mCVOExtMap);
+        ALOGD("RTPSource SDP =>\n%s", sdp.c_str());
+
+        sp<ASessionDescription> desc = new ASessionDescription;
+        bool isValidSdp = desc->setTo(sdp.c_str(), sdp.size());
+        ALOGV("RTPSource isValidSdp => %d", isValidSdp);
+
+        int sockRtp, sockRtcp;
+        ARTPConnection::MakeRTPSocketPair(&sockRtp, &sockRtcp, info->mLocalIp, info->mRemoteIp,
+                info->mLocalPort, info->mRemotePort, info->mSocketNetwork);
+
+        sp<AMessage> notify = new AMessage('accu', this);
+
+        ALOGV("RTPSource addStream. track-index=%d", i);
+        notify->setSize("trackIndex", i);
+        // index(i) should be started from 1. 0 is reserved for [root]
+        mRTPConn->addStream(sockRtp, sockRtcp, desc, i + 1, notify, false);
+        mRTPConn->setSelfID(info->mSelfID);
+        mRTPConn->setMinMaxBitrate(kMinVideoBitrate, info->mAS * 1000 /* kbps */);
+
+        info->mRTPSocket = sockRtp;
+        info->mRTCPSocket = sockRtcp;
+        info->mFirstSeqNumInSegment = 0;
+        info->mNewSegment = true;
+        info->mAllowedStaleAccessUnits = kMaxAllowedStaleAccessUnits;
+        info->mRTPAnchor = 0;
+        info->mNTPAnchorUs = -1;
+        info->mNormalPlayTimeRTP = 0;
+        info->mNormalPlayTimeUs = 0ll;
+
+        // index(i) should be started from 1. 0 is reserved for [root]
+        info->mPacketSource = new APacketSource(desc, i + 1);
+
+        int32_t timeScale;
+        sp<MetaData> format = getTrackFormat(i, &timeScale);
+        sp<AnotherPacketSource> source = new AnotherPacketSource(format);
+
+        if (info->mIsAudio) {
+            mAudioTrack = source;
+        } else {
+            mVideoTrack = source;
+        }
+
+        info->mSource = source;
+    }
+
+    if (mInPreparationPhase) {
+        mInPreparationPhase = false;
+        notifyPrepared();
+    }
+}
+
+void NuPlayer::RTPSource::start() {
+}
+
+void NuPlayer::RTPSource::pause() {
+    mState = PAUSED;
+}
+
+void NuPlayer::RTPSource::resume() {
+    mState = CONNECTING;
+}
+
+void NuPlayer::RTPSource::stop() {
+    if (mLooper == NULL) {
+        return;
+    }
+    sp<AMessage> msg = new AMessage(kWhatDisconnect, this);
+
+    sp<AMessage> dummy;
+    msg->postAndAwaitResponse(&dummy);
+}
+
+status_t NuPlayer::RTPSource::feedMoreTSData() {
+    Mutex::Autolock _l(mBufferingLock);
+    return mFinalResult;
+}
+
+sp<MetaData> NuPlayer::RTPSource::getFormatMeta(bool audio) {
+    sp<AnotherPacketSource> source = getSource(audio);
+
+    if (source == NULL) {
+        return NULL;
+    }
+
+    return source->getFormat();
+}
+
+bool NuPlayer::RTPSource::haveSufficientDataOnAllTracks() {
+    // We're going to buffer at least 2 secs worth data on all tracks before
+    // starting playback (both at startup and after a seek).
+
+    static const int64_t kMinDurationUs = 2000000ll;
+
+    int64_t mediaDurationUs = 0;
+    getDuration(&mediaDurationUs);
+    if ((mAudioTrack != NULL && mAudioTrack->isFinished(mediaDurationUs))
+            || (mVideoTrack != NULL && mVideoTrack->isFinished(mediaDurationUs))) {
+        return true;
+    }
+
+    status_t err;
+    int64_t durationUs;
+    if (mAudioTrack != NULL
+            && (durationUs = mAudioTrack->getBufferedDurationUs(&err))
+                    < kMinDurationUs
+            && err == OK) {
+        ALOGV("audio track doesn't have enough data yet. (%.2f secs buffered)",
+              durationUs / 1E6);
+        return false;
+    }
+
+    if (mVideoTrack != NULL
+            && (durationUs = mVideoTrack->getBufferedDurationUs(&err))
+                    < kMinDurationUs
+            && err == OK) {
+        ALOGV("video track doesn't have enough data yet. (%.2f secs buffered)",
+              durationUs / 1E6);
+        return false;
+    }
+
+    return true;
+}
+
+status_t NuPlayer::RTPSource::dequeueAccessUnit(
+        bool audio, sp<ABuffer> *accessUnit) {
+
+    sp<AnotherPacketSource> source = getSource(audio);
+
+    if (mState == PAUSED) {
+        ALOGV("-EWOULDBLOCK");
+        return -EWOULDBLOCK;
+    }
+
+    status_t finalResult;
+    if (!source->hasBufferAvailable(&finalResult)) {
+        if (finalResult == OK) {
+            int64_t mediaDurationUs = 0;
+            getDuration(&mediaDurationUs);
+            sp<AnotherPacketSource> otherSource = getSource(!audio);
+            status_t otherFinalResult;
+
+            // If other source already signaled EOS, this source should also signal EOS
+            if (otherSource != NULL &&
+                    !otherSource->hasBufferAvailable(&otherFinalResult) &&
+                    otherFinalResult == ERROR_END_OF_STREAM) {
+                source->signalEOS(ERROR_END_OF_STREAM);
+                return ERROR_END_OF_STREAM;
+            }
+
+            // If this source has detected near end, give it some time to retrieve more
+            // data before signaling EOS
+            if (source->isFinished(mediaDurationUs)) {
+                int64_t eosTimeout = audio ? mEOSTimeoutAudio : mEOSTimeoutVideo;
+                if (eosTimeout == 0) {
+                    setEOSTimeout(audio, ALooper::GetNowUs());
+                } else if ((ALooper::GetNowUs() - eosTimeout) > kNearEOSTimeoutUs) {
+                    setEOSTimeout(audio, 0);
+                    source->signalEOS(ERROR_END_OF_STREAM);
+                    return ERROR_END_OF_STREAM;
+                }
+                return -EWOULDBLOCK;
+            }
+
+            if (!(otherSource != NULL && otherSource->isFinished(mediaDurationUs))) {
+                // We should not enter buffering mode
+                // if any of the sources already have detected EOS.
+                // TODO: needs to be checked whether below line is needed or not.
+                // startBufferingIfNecessary();
+            }
+
+            return -EWOULDBLOCK;
+        }
+        return finalResult;
+    }
+
+    setEOSTimeout(audio, 0);
+
+    finalResult = source->dequeueAccessUnit(accessUnit);
+    if (finalResult != OK) {
+        return finalResult;
+    }
+
+    int32_t cvo;
+    if ((*accessUnit) != NULL && (*accessUnit)->meta()->findInt32("cvo", &cvo)) {
+        if (cvo != mLastCVOUpdated) {
+            sp<AMessage> msg = new AMessage();
+            msg->setInt32("payload-type", NuPlayer::RTPSource::RTP_CVO);
+            msg->setInt32("cvo", cvo);
+
+            sp<AMessage> notify = dupNotify();
+            notify->setInt32("what", kWhatIMSRxNotice);
+            notify->setMessage("message", msg);
+            notify->post();
+
+            ALOGV("notify cvo updated (%d)->(%d) to upper layer", mLastCVOUpdated, cvo);
+            mLastCVOUpdated = cvo;
+        }
+    }
+
+    return finalResult;
+}
+
+sp<AnotherPacketSource> NuPlayer::RTPSource::getSource(bool audio) {
+    return audio ? mAudioTrack : mVideoTrack;
+}
+
+void NuPlayer::RTPSource::setEOSTimeout(bool audio, int64_t timeout) {
+    if (audio) {
+        mEOSTimeoutAudio = timeout;
+    } else {
+        mEOSTimeoutVideo = timeout;
+    }
+}
+
+status_t NuPlayer::RTPSource::getDuration(int64_t *durationUs) {
+    *durationUs = 0ll;
+
+    int64_t audioDurationUs;
+    if (mAudioTrack != NULL
+            && mAudioTrack->getFormat()->findInt64(
+                kKeyDuration, &audioDurationUs)
+            && audioDurationUs > *durationUs) {
+        *durationUs = audioDurationUs;
+    }
+
+    int64_t videoDurationUs;
+    if (mVideoTrack != NULL
+            && mVideoTrack->getFormat()->findInt64(
+                kKeyDuration, &videoDurationUs)
+            && videoDurationUs > *durationUs) {
+        *durationUs = videoDurationUs;
+    }
+
+    return OK;
+}
+
+status_t NuPlayer::RTPSource::seekTo(int64_t seekTimeUs, MediaPlayerSeekMode mode) {
+    ALOGV("RTPSource::seekTo=%d, mode=%d", (int)seekTimeUs, mode);
+    return OK;
+}
+
+void NuPlayer::RTPSource::schedulePollBuffering() {
+    sp<AMessage> msg = new AMessage(kWhatPollBuffering, this);
+    msg->post(kBufferingPollIntervalUs); // 1 second intervals
+}
+
+void NuPlayer::RTPSource::onPollBuffering() {
+    schedulePollBuffering();
+}
+
+void NuPlayer::RTPSource::onMessageReceived(const sp<AMessage> &msg) {
+    ALOGV("onMessageReceived =%d", msg->what());
+
+    switch (msg->what()) {
+        case kWhatAccessUnitComplete:
+        {
+            if (mState == CONNECTING) {
+                mState = CONNECTED;
+            }
+
+            int32_t timeUpdate;
+            //"time-update" raised from ARTPConnection::parseSR()
+            if (msg->findInt32("time-update", &timeUpdate) && timeUpdate) {
+                size_t trackIndex;
+                CHECK(msg->findSize("trackIndex", &trackIndex));
+
+                uint32_t rtpTime;
+                uint64_t ntpTime;
+                CHECK(msg->findInt32("rtp-time", (int32_t *)&rtpTime));
+                CHECK(msg->findInt64("ntp-time", (int64_t *)&ntpTime));
+
+                onTimeUpdate(trackIndex, rtpTime, ntpTime);
+                break;
+            }
+
+            int32_t firstRTCP;
+            if (msg->findInt32("first-rtcp", &firstRTCP)) {
+                // There won't be an access unit here, it's just a notification
+                // that the data communication worked since we got the first
+                // rtcp packet.
+                ALOGV("first-rtcp");
+                break;
+            }
+
+            int32_t IMSRxNotice;
+            if (msg->findInt32("rtcp-event", &IMSRxNotice)) {
+                int32_t payloadType, feedbackType;
+                CHECK(msg->findInt32("payload-type", &payloadType));
+                CHECK(msg->findInt32("feedback-type", &feedbackType));
+
+                sp<AMessage> notify = dupNotify();
+                notify->setInt32("what", kWhatIMSRxNotice);
+                notify->setMessage("message", msg);
+                notify->post();
+
+                ALOGV("IMSRxNotice \t\t payload : %d feedback : %d",
+                      payloadType, feedbackType);
+                break;
+            }
+
+            size_t trackIndex;
+            CHECK(msg->findSize("trackIndex", &trackIndex));
+
+            sp<ABuffer> accessUnit;
+            if (msg->findBuffer("access-unit", &accessUnit) == false) {
+                break;
+            }
+
+            int32_t damaged;
+            if (accessUnit->meta()->findInt32("damaged", &damaged)
+                    && damaged) {
+                ALOGD("dropping damaged access unit.");
+                break;
+            }
+
+            // Implicitly assert on valid trackIndex here, which we ensure by
+            // never removing tracks.
+            TrackInfo *info = &mTracks.editItemAt(trackIndex);
+
+            sp<AnotherPacketSource> source = info->mSource;
+            if (source != NULL) {
+                uint32_t rtpTime;
+                CHECK(accessUnit->meta()->findInt32("rtp-time", (int32_t *)&rtpTime));
+
+                /* AnotherPacketSource make an assertion if there is no ntp provided
+                   RTPSource should provide ntpUs all the times.
+                if (!info->mNPTMappingValid) {
+                    // This is a live stream, we didn't receive any normal
+                    // playtime mapping. We won't map to npt time.
+                    source->queueAccessUnit(accessUnit);
+                    break;
+                }
+                */
+
+                int64_t nptUs =
+                    ((double)rtpTime - (double)info->mRTPTime)
+                        / info->mTimeScale
+                        * 1000000ll
+                        + info->mNormalPlaytimeUs;
+
+                accessUnit->meta()->setInt64("timeUs", nptUs);
+
+                source->queueAccessUnit(accessUnit);
+            }
+
+            break;
+        }
+        case kWhatDisconnect:
+        {
+            sp<AReplyToken> replyID;
+            CHECK(msg->senderAwaitsResponse(&replyID));
+
+            for (size_t i = 0; i < mTracks.size(); ++i) {
+                TrackInfo *info = &mTracks.editItemAt(i);
+
+                if (info->mIsAudio) {
+                    mAudioTrack->signalEOS(ERROR_END_OF_STREAM);
+                    mAudioTrack = NULL;
+                    ALOGV("mAudioTrack disconnected");
+                } else {
+                    mVideoTrack->signalEOS(ERROR_END_OF_STREAM);
+                    mVideoTrack = NULL;
+                    ALOGV("mVideoTrack disconnected");
+                }
+
+                mRTPConn->removeStream(info->mRTPSocket, info->mRTCPSocket);
+                close(info->mRTPSocket);
+                close(info->mRTCPSocket);
+            }
+
+            mTracks.clear();
+            mFirstAccessUnit = true;
+            mAllTracksHaveTime = false;
+            mNTPAnchorUs = -1;
+            mMediaAnchorUs = -1;
+            mLastMediaTimeUs = -1;
+            mNumAccessUnitsReceived = 0;
+            mReceivedFirstRTCPPacket = false;
+            mReceivedFirstRTPPacket = false;
+            mPausing = false;
+            mPauseGeneration = 0;
+
+            (new AMessage)->postReply(replyID);
+
+            break;
+        }
+        case kWhatPollBuffering:
+            break;
+        default:
+            TRESPASS();
+    }
+}
+
+void NuPlayer::RTPSource::onTimeUpdate(int32_t trackIndex, uint32_t rtpTime, uint64_t ntpTime) {
+    ALOGV("onTimeUpdate track %d, rtpTime = 0x%08x, ntpTime = %#016llx",
+         trackIndex, rtpTime, (long long)ntpTime);
+
+    // convert ntpTime in Q32 seconds to microseconds. Note: this will not lose precision
+    // because ntpTimeUs is at most 52 bits (double holds 53 bits)
+    int64_t ntpTimeUs = (int64_t)(ntpTime * 1E6 / (1ll << 32));
+
+    TrackInfo *track = &mTracks.editItemAt(trackIndex);
+
+    track->mRTPAnchor = rtpTime;
+    track->mNTPAnchorUs = ntpTimeUs;
+
+    if (mNTPAnchorUs < 0) {
+        mNTPAnchorUs = ntpTimeUs;
+        mMediaAnchorUs = mLastMediaTimeUs;
+    }
+
+    if (!mAllTracksHaveTime) {
+        bool allTracksHaveTime = (mTracks.size() > 0);
+        for (size_t i = 0; i < mTracks.size(); ++i) {
+            TrackInfo *track = &mTracks.editItemAt(i);
+            if (track->mNTPAnchorUs < 0) {
+                allTracksHaveTime = false;
+                break;
+            }
+        }
+        if (allTracksHaveTime) {
+            mAllTracksHaveTime = true;
+            ALOGI("Time now established for all tracks.");
+        }
+    }
+    if (mAllTracksHaveTime && dataReceivedOnAllChannels()) {
+        // Time is now established, lets start timestamping immediately
+        for (size_t i = 0; i < mTracks.size(); ++i) {
+            TrackInfo *trackInfo = &mTracks.editItemAt(i);
+            while (!trackInfo->mPackets.empty()) {
+                sp<ABuffer> accessUnit = *trackInfo->mPackets.begin();
+                trackInfo->mPackets.erase(trackInfo->mPackets.begin());
+
+                if (addMediaTimestamp(i, trackInfo, accessUnit)) {
+                    postQueueAccessUnit(i, accessUnit);
+                }
+            }
+        }
+    }
+}
+
+bool NuPlayer::RTPSource::addMediaTimestamp(
+        int32_t trackIndex, const TrackInfo *track,
+        const sp<ABuffer> &accessUnit) {
+
+    uint32_t rtpTime;
+    CHECK(accessUnit->meta()->findInt32(
+                "rtp-time", (int32_t *)&rtpTime));
+
+    int64_t relRtpTimeUs =
+        (((int64_t)rtpTime - (int64_t)track->mRTPAnchor) * 1000000ll)
+        / track->mTimeScale;
+
+    int64_t ntpTimeUs = track->mNTPAnchorUs + relRtpTimeUs;
+
+    int64_t mediaTimeUs = mMediaAnchorUs + ntpTimeUs - mNTPAnchorUs;
+
+    if (mediaTimeUs > mLastMediaTimeUs) {
+        mLastMediaTimeUs = mediaTimeUs;
+    }
+
+    if (mediaTimeUs < 0) {
+        ALOGV("dropping early accessUnit.");
+        return false;
+    }
+
+    ALOGV("track %d rtpTime=%u mediaTimeUs = %lld us (%.2f secs)",
+            trackIndex, rtpTime, (long long)mediaTimeUs, mediaTimeUs / 1E6);
+
+    accessUnit->meta()->setInt64("timeUs", mediaTimeUs);
+
+    return true;
+}
+
+bool NuPlayer::RTPSource::dataReceivedOnAllChannels() {
+    TrackInfo *track;
+    for (size_t i = 0; i < mTracks.size(); ++i) {
+        track = &mTracks.editItemAt(i);
+        if (track->mPackets.empty()) {
+            return false;
+        }
+    }
+    return true;
+}
+
+void NuPlayer::RTPSource::postQueueAccessUnit(
+        size_t trackIndex, const sp<ABuffer> &accessUnit) {
+    sp<AMessage> msg = new AMessage(kWhatAccessUnit, this);
+    msg->setInt32("what", kWhatAccessUnit);
+    msg->setSize("trackIndex", trackIndex);
+    msg->setBuffer("accessUnit", accessUnit);
+    msg->post();
+}
+
+void NuPlayer::RTPSource::postQueueEOS(size_t trackIndex, status_t finalResult) {
+    sp<AMessage> msg = new AMessage(kWhatEOS, this);
+    msg->setInt32("what", kWhatEOS);
+    msg->setSize("trackIndex", trackIndex);
+    msg->setInt32("finalResult", finalResult);
+    msg->post();
+}
+
+sp<MetaData> NuPlayer::RTPSource::getTrackFormat(size_t index, int32_t *timeScale) {
+    CHECK_GE(index, 0u);
+    CHECK_LT(index, mTracks.size());
+
+    const TrackInfo &info = mTracks.itemAt(index);
+
+    *timeScale = info.mTimeScale;
+
+    return info.mPacketSource->getFormat();
+}
+
+void NuPlayer::RTPSource::onConnected() {
+    ALOGV("onConnected");
+    mState = CONNECTED;
+}
+
+void NuPlayer::RTPSource::onDisconnected(const sp<AMessage> &msg) {
+    if (mState == DISCONNECTED) {
+        return;
+    }
+
+    status_t err;
+    CHECK(msg->findInt32("result", &err));
+    CHECK_NE(err, (status_t)OK);
+
+//    mLooper->unregisterHandler(mHandler->id());
+//    mHandler.clear();
+
+    if (mState == CONNECTING) {
+        // We're still in the preparation phase, signal that it
+        // failed.
+        notifyPrepared(err);
+    }
+
+    mState = DISCONNECTED;
+//    setError(err);
+
+}
+
+status_t NuPlayer::RTPSource::setParameter(const String8 &key, const String8 &value) {
+    ALOGV("setParameter: key (%s) => value (%s)", key.string(), value.string());
+
+    bool isAudioKey = key.contains("audio");
+    TrackInfo *info = NULL;
+    for (unsigned i = 0; i < mTracks.size(); ++i) {
+        info = &mTracks.editItemAt(i);
+        if (info != NULL && info->mIsAudio == isAudioKey) {
+            ALOGV("setParameter: %s track (%d) found", isAudioKey ? "audio" : "video" , i);
+            break;
+        }
+    }
+
+    if (info == NULL) {
+        TrackInfo newTrackInfo;
+        newTrackInfo.mIsAudio = isAudioKey;
+        mTracks.push(newTrackInfo);
+        info = &mTracks.editTop();
+    }
+
+    if (key == "rtp-param-mime-type") {
+        info->mMimeType = value;
+
+        const char *mime = value.string();
+        const char *delimiter = strchr(mime, '/');
+        info->mCodecName = delimiter ? (delimiter + 1) : "<none>";
+
+        ALOGV("rtp-param-mime-type: mMimeType (%s) => mCodecName (%s)",
+                info->mMimeType.string(), info->mCodecName.string());
+    } else if (key == "video-param-decoder-profile") {
+        info->mCodecProfile = atoi(value);
+    } else if (key == "video-param-decoder-level") {
+        info->mCodecLevel = atoi(value);
+    } else if (key == "video-param-width") {
+        info->mWidth = atoi(value);
+    } else if (key == "video-param-height") {
+        info->mHeight = atoi(value);
+    } else if (key == "rtp-param-local-ip") {
+        info->mLocalIp = value;
+    } else if (key == "rtp-param-local-port") {
+        info->mLocalPort = atoi(value);
+    } else if (key == "rtp-param-remote-ip") {
+        info->mRemoteIp = value;
+    } else if (key == "rtp-param-remote-port") {
+        info->mRemotePort = atoi(value);
+    } else if (key == "rtp-param-payload-type") {
+        info->mPayloadType = atoi(value);
+    } else if (key == "rtp-param-as") {
+        //AS means guaranteed bit rate that negotiated from sdp.
+        info->mAS = atoi(value);
+    } else if (key == "rtp-param-rtp-timeout") {
+    } else if (key == "rtp-param-rtcp-timeout") {
+    } else if (key == "rtp-param-time-scale") {
+    } else if (key == "rtp-param-self-id") {
+        info->mSelfID = atoi(value);
+    } else if (key == "rtp-param-ext-cvo-extmap") {
+        info->mCVOExtMap = atoi(value);
+    } else if (key == "rtp-param-set-socket-network") {
+        int64_t networkHandle = atoll(value);
+        setSocketNetwork(networkHandle);
+    }
+
+    return OK;
+}
+
+status_t NuPlayer::RTPSource::setParameters(const String8 &params) {
+    ALOGV("setParameters: %s", params.string());
+    const char *cparams = params.string();
+    const char *key_start = cparams;
+    for (;;) {
+        const char *equal_pos = strchr(key_start, '=');
+        if (equal_pos == NULL) {
+            ALOGE("Parameters %s miss a value", cparams);
+            return BAD_VALUE;
+        }
+        String8 key(key_start, equal_pos - key_start);
+        TrimString(&key);
+        if (key.length() == 0) {
+            ALOGE("Parameters %s contains an empty key", cparams);
+            return BAD_VALUE;
+        }
+        const char *value_start = equal_pos + 1;
+        const char *semicolon_pos = strchr(value_start, ';');
+        String8 value;
+        if (semicolon_pos == NULL) {
+            value.setTo(value_start);
+        } else {
+            value.setTo(value_start, semicolon_pos - value_start);
+        }
+        if (setParameter(key, value) != OK) {
+            return BAD_VALUE;
+        }
+        if (semicolon_pos == NULL) {
+            break;  // Reaches the end
+        }
+        key_start = semicolon_pos + 1;
+    }
+    return OK;
+}
+
+void NuPlayer::RTPSource::setSocketNetwork(int64_t networkHandle) {
+    ALOGV("setSocketNetwork: %llu", (unsigned long long)networkHandle);
+
+    TrackInfo *info = NULL;
+    for (size_t i = 0; i < mTracks.size(); ++i) {
+        info = &mTracks.editItemAt(i);
+
+        if (info == NULL)
+            break;
+
+        info->mSocketNetwork = networkHandle;
+    }
+}
+
+// Trim both leading and trailing whitespace from the given string.
+//static
+void NuPlayer::RTPSource::TrimString(String8 *s) {
+    size_t num_bytes = s->bytes();
+    const char *data = s->string();
+
+    size_t leading_space = 0;
+    while (leading_space < num_bytes && isspace(data[leading_space])) {
+        ++leading_space;
+    }
+
+    size_t i = num_bytes;
+    while (i > leading_space && isspace(data[i - 1])) {
+        --i;
+    }
+
+    s->setTo(String8(&data[leading_space], i - leading_space));
+}
+
+}  // namespace android
diff --git a/media/libmediaplayerservice/nuplayer/RTPSource.h b/media/libmediaplayerservice/nuplayer/RTPSource.h
new file mode 100644
index 0000000..5085a7e
--- /dev/null
+++ b/media/libmediaplayerservice/nuplayer/RTPSource.h
@@ -0,0 +1,218 @@
+/*
+ * Copyright (C) 2010 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef RTP_SOURCE_H_
+
+#define RTP_SOURCE_H_
+
+#include <media/stagefright/foundation/ABase.h>
+#include <media/stagefright/foundation/ABuffer.h>
+#include <media/stagefright/foundation/ADebug.h>
+#include <media/stagefright/foundation/AMessage.h>
+#include <media/stagefright/MediaSource.h>
+#include <media/stagefright/Utils.h>
+#include <media/BufferingSettings.h>
+
+#include <utils/KeyedVector.h>
+#include <utils/Vector.h>
+#include <utils/RefBase.h>
+
+#include "AnotherPacketSource.h"
+#include "APacketSource.h"
+#include "ARTPConnection.h"
+#include "ASessionDescription.h"
+#include "NuPlayerSource.h"
+
+
+
+
+
+
+namespace android {
+
+struct ALooper;
+struct AnotherPacketSource;
+
+struct NuPlayer::RTPSource : public NuPlayer::Source {
+    RTPSource(
+            const sp<AMessage> &notify,
+            const String8& rtpParams);
+
+    enum {
+        RTCP_TSFB = 205,
+        RTCP_PSFB = 206,
+        RTP_CVO = 300,
+        RTP_AUTODOWN = 400,
+    };
+
+    virtual status_t getBufferingSettings(
+            BufferingSettings* buffering /* nonnull */) override;
+    virtual status_t setBufferingSettings(const BufferingSettings& buffering) override;
+
+    virtual void prepareAsync();
+    virtual void start();
+    virtual void stop();
+    virtual void pause();
+    virtual void resume();
+
+    virtual status_t feedMoreTSData();
+
+    virtual status_t dequeueAccessUnit(bool audio, sp<ABuffer> *accessUnit);
+
+    virtual status_t getDuration(int64_t *durationUs);
+    virtual status_t seekTo(
+            int64_t seekTimeUs,
+            MediaPlayerSeekMode mode = MediaPlayerSeekMode::SEEK_PREVIOUS_SYNC) override;
+
+    void onMessageReceived(const sp<AMessage> &msg);
+
+protected:
+    virtual ~RTPSource();
+
+    virtual sp<MetaData> getFormatMeta(bool audio);
+
+private:
+    enum {
+        kWhatAccessUnit = 'accU',
+        kWhatAccessUnitComplete = 'accu',
+        kWhatDisconnect = 'disc',
+        kWhatEOS = 'eos!',
+        kWhatPollBuffering = 'poll',
+        kWhatSetBufferingSettings = 'sBuS',
+    };
+
+    const int64_t kBufferingPollIntervalUs = 1000000ll;
+    const int32_t kMinVideoBitrate = 192000; /* bps */
+
+    enum State {
+        DISCONNECTED,
+        CONNECTING,
+        CONNECTED,
+        PAUSED,
+    };
+
+    struct TrackInfo {
+
+        /* SDP of track */
+        bool mIsAudio;
+        int32_t mPayloadType;
+        String8 mMimeType;
+        String8 mCodecName;
+        int32_t mCodecProfile;
+        int32_t mCodecLevel;
+        int32_t mWidth;
+        int32_t mHeight;
+        String8 mLocalIp;
+        String8 mRemoteIp;
+        int32_t mLocalPort;
+        int32_t mRemotePort;
+        int64_t mSocketNetwork;
+        int32_t mTimeScale;
+        int32_t mAS;
+
+        /* Unique ID indicates itself */
+        uint32_t mSelfID;
+        /* extmap:<value> for CVO will be set to here */
+        int32_t mCVOExtMap;
+
+        /* a copy of TrackInfo in RTSPSource */
+        sp<AnotherPacketSource> mSource;
+        uint32_t mRTPTime;
+        int64_t mNormalPlaytimeUs;
+        bool mNPTMappingValid;
+
+        /* a copy of TrackInfo in MyHandler.h */
+        int mRTPSocket;
+        int mRTCPSocket;
+        uint32_t mFirstSeqNumInSegment;
+        bool mNewSegment;
+        int32_t mAllowedStaleAccessUnits;
+        uint32_t mRTPAnchor;
+        int64_t mNTPAnchorUs;
+        bool mEOSReceived;
+        uint32_t mNormalPlayTimeRTP;
+        int64_t mNormalPlayTimeUs;
+        sp<APacketSource> mPacketSource;
+        List<sp<ABuffer>> mPackets;
+    };
+
+    const String8 mRTPParams;
+    uint32_t mFlags;
+    State mState;
+    status_t mFinalResult;
+
+    // below 3 parameters need to be checked whether it needed or not.
+    Mutex mBufferingLock;
+    bool mBuffering;
+    bool mInPreparationPhase;
+    Mutex mBufferingSettingsLock;
+    BufferingSettings mBufferingSettings;
+
+    sp<ALooper> mLooper;
+
+    sp<ARTPConnection> mRTPConn;
+
+    Vector<TrackInfo> mTracks;
+    sp<AnotherPacketSource> mAudioTrack;
+    sp<AnotherPacketSource> mVideoTrack;
+
+    int64_t mEOSTimeoutAudio;
+    int64_t mEOSTimeoutVideo;
+
+    /* MyHandler.h */
+    bool mFirstAccessUnit;
+    bool mAllTracksHaveTime;
+    int64_t mNTPAnchorUs;
+    int64_t mMediaAnchorUs;
+    int64_t mLastMediaTimeUs;
+    int64_t mNumAccessUnitsReceived;
+    int32_t mLastCVOUpdated;
+    bool mReceivedFirstRTCPPacket;
+    bool mReceivedFirstRTPPacket;
+    bool mPausing;
+    int32_t mPauseGeneration;
+
+    sp<AnotherPacketSource> getSource(bool audio);
+
+    /* MyHandler.h */
+    void onTimeUpdate(int32_t trackIndex, uint32_t rtpTime, uint64_t ntpTime);
+    bool addMediaTimestamp(int32_t trackIndex, const TrackInfo *track,
+            const sp<ABuffer> &accessUnit);
+    bool dataReceivedOnAllChannels();
+    void postQueueAccessUnit(size_t trackIndex, const sp<ABuffer> &accessUnit);
+    void postQueueEOS(size_t trackIndex, status_t finalResult);
+    sp<MetaData> getTrackFormat(size_t index, int32_t *timeScale);
+    void onConnected();
+    void onDisconnected(const sp<AMessage> &msg);
+
+    void schedulePollBuffering();
+    void onPollBuffering();
+
+    bool haveSufficientDataOnAllTracks();
+
+    void setEOSTimeout(bool audio, int64_t timeout);
+
+    status_t setParameters(const String8 &params);
+    status_t setParameter(const String8 &key, const String8 &value);
+    void setSocketNetwork(int64_t networkHandle);
+    static void TrimString(String8 *s);
+
+    DISALLOW_EVIL_CONSTRUCTORS(RTPSource);
+};
+
+}  // namespace android
+
+#endif  // RTP_SOURCE_H_
diff --git a/media/libmediatranscoding/.clang-format b/media/libmediatranscoding/.clang-format
index 3198d00..f23b842 100644
--- a/media/libmediatranscoding/.clang-format
+++ b/media/libmediatranscoding/.clang-format
@@ -26,4 +26,26 @@
 DerivePointerAlignment: false
 IndentWidth: 4
 PointerAlignment: Left
-TabWidth: 4
\ No newline at end of file
+TabWidth: 4
+
+# Deviations from the above file:
+# "Don't indent the section label"
+AccessModifierOffset: -4
+# "Each line of text in your code should be at most 100 columns long."
+ColumnLimit: 100
+# "Constructor initializer lists can be all on one line or with subsequent
+# lines indented eight spaces.". clang-format does not support having the colon
+# on the same line as the constructor function name, so this is the best
+# approximation of that rule, which makes all entries in the list (except the
+# first one) have an eight space indentation.
+ConstructorInitializerIndentWidth: 6
+# There is nothing in go/droidcppstyle about case labels, but there seems to be
+# more code that does not indent the case labels in frameworks/base.
+IndentCaseLabels: false
+# There have been some bugs in which subsequent formatting operations introduce
+# weird comment jumps.
+ReflowComments: false
+# Android supports C++17 now, but it seems only Cpp11 will work now.
+# "Cpp11 is a deprecated alias for Latest" according to
+# https://clang.llvm.org/docs/ClangFormatStyleOptions.html
+Standard: Cpp11
diff --git a/media/libmediatranscoding/Android.bp b/media/libmediatranscoding/Android.bp
index 7468426..e3e87e1 100644
--- a/media/libmediatranscoding/Android.bp
+++ b/media/libmediatranscoding/Android.bp
@@ -20,7 +20,8 @@
     local_include_dir: "aidl",
     srcs: [
         "aidl/android/media/IMediaTranscodingService.aidl",
-        "aidl/android/media/ITranscodingServiceClient.aidl",
+        "aidl/android/media/ITranscodingClient.aidl",
+        "aidl/android/media/ITranscodingClientCallback.aidl",
         "aidl/android/media/TranscodingErrorCode.aidl",
         "aidl/android/media/TranscodingJobPriority.aidl",
         "aidl/android/media/TranscodingType.aidl",
@@ -35,7 +36,8 @@
     name: "libmediatranscoding",
 
     srcs: [
-        "TranscodingClientManager.cpp"
+        "TranscodingClientManager.cpp",
+        "TranscodingJobScheduler.cpp",
     ],
 
     shared_libs: [
@@ -43,6 +45,7 @@
         "libcutils",
         "liblog",
         "libutils",
+        "libmediatranscoder",
     ],
 
     export_include_dirs: ["include"],
diff --git a/media/libmediatranscoding/OWNERS b/media/libmediatranscoding/OWNERS
index 02287cb..b08d573 100644
--- a/media/libmediatranscoding/OWNERS
+++ b/media/libmediatranscoding/OWNERS
@@ -1,3 +1,5 @@
-akersten@google.com
+chz@google.com
+gokrishnan@google.com
 hkuang@google.com
 lnilsson@google.com
+pawin@google.com
diff --git a/media/libmediatranscoding/TranscodingClientManager.cpp b/media/libmediatranscoding/TranscodingClientManager.cpp
index 7252437..b05e3a6 100644
--- a/media/libmediatranscoding/TranscodingClientManager.cpp
+++ b/media/libmediatranscoding/TranscodingClientManager.cpp
@@ -17,31 +17,138 @@
 // #define LOG_NDEBUG 0
 #define LOG_TAG "TranscodingClientManager"
 
+#include <aidl/android/media/BnTranscodingClient.h>
+#include <android/binder_ibinder.h>
 #include <inttypes.h>
 #include <media/TranscodingClientManager.h>
+#include <media/TranscodingRequest.h>
 #include <utils/Log.h>
 
 namespace android {
 
+using ::aidl::android::media::BnTranscodingClient;
+using ::aidl::android::media::TranscodingJobParcel;
+using ::aidl::android::media::TranscodingRequestParcel;
 using Status = ::ndk::ScopedAStatus;
+using ::ndk::SpAIBinder;
 
-// static
-TranscodingClientManager& TranscodingClientManager::getInstance() {
-    static TranscodingClientManager gInstance{};
-    return gInstance;
+///////////////////////////////////////////////////////////////////////////////
+
+/**
+ * ClientImpl implements a single client and contains all its information.
+ */
+struct TranscodingClientManager::ClientImpl : public BnTranscodingClient {
+    /* The remote client callback that this ClientInfo is associated with.
+     * Once the ClientInfo is created, we hold an SpAIBinder so that the binder
+     * object doesn't get created again, otherwise the binder object pointer
+     * may not be unique.
+     */
+    SpAIBinder mClientCallback;
+    /* A unique id assigned to the client by the service. This number is used
+     * by the service for indexing. Here we use the binder object's pointer
+     * (casted to int64t_t) as the client id.
+     */
+    ClientIdType mClientId;
+    pid_t mClientPid;
+    uid_t mClientUid;
+    std::string mClientName;
+    std::string mClientOpPackageName;
+
+    // Next jobId to assign
+    std::atomic<std::int32_t> mNextJobId;
+    // Pointer to the client manager for this client
+    TranscodingClientManager* mOwner;
+
+    ClientImpl(const std::shared_ptr<ITranscodingClientCallback>& callback, pid_t pid,
+            uid_t uid, const std::string& clientName, const std::string& opPackageName,
+               TranscodingClientManager* owner);
+
+    Status submitRequest(const TranscodingRequestParcel& /*in_request*/,
+                         TranscodingJobParcel* /*out_job*/, bool* /*_aidl_return*/) override;
+
+    Status cancelJob(int32_t /*in_jobId*/, bool* /*_aidl_return*/) override;
+
+    Status getJobWithId(int32_t /*in_jobId*/, TranscodingJobParcel* /*out_job*/,
+                        bool* /*_aidl_return*/) override;
+
+    Status unregister() override;
+};
+
+TranscodingClientManager::ClientImpl::ClientImpl(
+        const std::shared_ptr<ITranscodingClientCallback>& callback, pid_t pid, uid_t uid,
+        const std::string& clientName, const std::string& opPackageName,
+        TranscodingClientManager* owner)
+      : mClientCallback((callback != nullptr) ? callback->asBinder() : nullptr),
+        mClientId((int64_t)mClientCallback.get()),
+        mClientPid(pid),
+        mClientUid(uid),
+        mClientName(clientName),
+        mClientOpPackageName(opPackageName),
+        mNextJobId(0),
+        mOwner(owner) {}
+
+Status TranscodingClientManager::ClientImpl::submitRequest(
+        const TranscodingRequestParcel& in_request, TranscodingJobParcel* out_job,
+        bool* _aidl_return) {
+    if (in_request.fileName.empty()) {
+        // This is the only error we check for now.
+        *_aidl_return = false;
+        return Status::ok();
+    }
+
+    int32_t jobId = mNextJobId.fetch_add(1);
+
+    *_aidl_return =
+            mOwner->mJobScheduler->submit(mClientId, jobId, mClientPid, in_request,
+                                          ITranscodingClientCallback::fromBinder(mClientCallback));
+
+    if (*_aidl_return) {
+        out_job->jobId = jobId;
+
+        // TODO(chz): is some of this coming from JobScheduler?
+        *(TranscodingRequest*)&out_job->request = in_request;
+        out_job->awaitNumberOfJobs = 0;
+    }
+    return Status::ok();
 }
 
+Status TranscodingClientManager::ClientImpl::cancelJob(int32_t in_jobId, bool* _aidl_return) {
+    *_aidl_return = mOwner->mJobScheduler->cancel(mClientId, in_jobId);
+    return Status::ok();
+}
+
+Status TranscodingClientManager::ClientImpl::getJobWithId(int32_t in_jobId,
+                                                          TranscodingJobParcel* out_job,
+                                                          bool* _aidl_return) {
+    *_aidl_return = mOwner->mJobScheduler->getJob(mClientId, in_jobId, &out_job->request);
+
+    if (*_aidl_return) {
+        out_job->jobId = in_jobId;
+        out_job->awaitNumberOfJobs = 0;
+    }
+    return Status::ok();
+}
+
+Status TranscodingClientManager::ClientImpl::unregister() {
+    // TODO(chz): Decide what to do about this client's jobs.
+    // If app crashed, it could be relaunched later. Do we want to keep the
+    // jobs around for that?
+    mOwner->removeClient(mClientId);
+    return Status::ok();
+}
+
+///////////////////////////////////////////////////////////////////////////////
+
 // static
 void TranscodingClientManager::BinderDiedCallback(void* cookie) {
-    int32_t clientId = static_cast<int32_t>(reinterpret_cast<intptr_t>(cookie));
-    ALOGD("Client %" PRId32 " is dead", clientId);
-    // Don't check for pid validity since we know it's already dead.
-    TranscodingClientManager& manager = TranscodingClientManager::getInstance();
-    manager.removeClient(clientId);
+    ClientImpl* client = static_cast<ClientImpl*>(cookie);
+    ALOGD("Client %lld is dead", (long long)client->mClientId);
+    client->unregister();
 }
 
-TranscodingClientManager::TranscodingClientManager()
-    : mDeathRecipient(AIBinder_DeathRecipient_new(BinderDiedCallback)) {
+TranscodingClientManager::TranscodingClientManager(
+        const std::shared_ptr<SchedulerClientInterface>& scheduler)
+      : mDeathRecipient(AIBinder_DeathRecipient_new(BinderDiedCallback)), mJobScheduler(scheduler) {
     ALOGD("TranscodingClientManager started");
 }
 
@@ -49,9 +156,8 @@
     ALOGD("TranscodingClientManager exited");
 }
 
-bool TranscodingClientManager::isClientIdRegistered(int32_t clientId) const {
-    std::scoped_lock lock{mLock};
-    return mClientIdToClientInfoMap.find(clientId) != mClientIdToClientInfoMap.end();
+bool TranscodingClientManager::isClientIdRegistered(ClientIdType clientId) const {
+    return mClientIdToClientMap.find(clientId) != mClientIdToClientMap.end();
 }
 
 void TranscodingClientManager::dumpAllClients(int fd, const Vector<String16>& args __unused) {
@@ -60,86 +166,87 @@
     const size_t SIZE = 256;
     char buffer[SIZE];
 
-    snprintf(buffer, SIZE, "    Total num of Clients: %zu\n", mClientIdToClientInfoMap.size());
+    snprintf(buffer, SIZE, "    Total num of Clients: %zu\n", mClientIdToClientMap.size());
     result.append(buffer);
 
-    if (mClientIdToClientInfoMap.size() > 0) {
+    if (mClientIdToClientMap.size() > 0) {
         snprintf(buffer, SIZE, "========== Dumping all clients =========\n");
         result.append(buffer);
     }
 
-    for (const auto& iter : mClientIdToClientInfoMap) {
-        const std::shared_ptr<ITranscodingServiceClient> client = iter.second->mClient;
-        std::string clientName;
-        Status status = client->getName(&clientName);
-        if (!status.isOk()) {
-            ALOGE("Failed to get client: %d information", iter.first);
-            continue;
-        }
-        snprintf(buffer, SIZE, "    -- Clients: %d  name: %s\n", iter.first, clientName.c_str());
+    for (const auto& iter : mClientIdToClientMap) {
+        snprintf(buffer, SIZE, "    -- Client id: %lld  name: %s\n", (long long)iter.first,
+                 iter.second->mClientName.c_str());
         result.append(buffer);
     }
 
     write(fd, result.string(), result.size());
 }
 
-status_t TranscodingClientManager::addClient(std::unique_ptr<ClientInfo> client) {
+status_t TranscodingClientManager::addClient(
+        const std::shared_ptr<ITranscodingClientCallback>& callback, pid_t pid, uid_t uid,
+        const std::string& clientName, const std::string& opPackageName,
+        std::shared_ptr<ITranscodingClient>* outClient) {
     // Validate the client.
-    if (client == nullptr || client->mClientId < 0 || client->mClientPid < 0 ||
-        client->mClientUid < 0 || client->mClientOpPackageName.empty() ||
-        client->mClientOpPackageName == "") {
+    if (callback == nullptr || pid < 0 || clientName.empty() || opPackageName.empty()) {
         ALOGE("Invalid client");
         return BAD_VALUE;
     }
 
+    // Creates the client and uses its process id as client id.
+    std::shared_ptr<ClientImpl> client = ::ndk::SharedRefBase::make<ClientImpl>(
+            callback, pid, uid, clientName, opPackageName, this);
+
     std::scoped_lock lock{mLock};
 
-    // Check if the client already exists.
-    if (mClientIdToClientInfoMap.count(client->mClientId) != 0) {
-        ALOGW("Client already exists.");
+    // Checks if the client already registers.
+    if (isClientIdRegistered(client->mClientId)) {
         return ALREADY_EXISTS;
     }
 
-    ALOGD("Adding client id %d pid: %d uid: %d %s", client->mClientId, client->mClientPid,
-          client->mClientUid, client->mClientOpPackageName.c_str());
+    ALOGD("Adding client id %lld, pid %d, uid %d, name %s, package %s",
+          (long long)client->mClientId, client->mClientPid, client->mClientUid,
+          client->mClientName.c_str(), client->mClientOpPackageName.c_str());
 
-    AIBinder_linkToDeath(client->mClient->asBinder().get(), mDeathRecipient.get(),
-                         reinterpret_cast<void*>(client->mClientId));
+    AIBinder_linkToDeath(client->mClientCallback.get(), mDeathRecipient.get(),
+                         reinterpret_cast<void*>(client.get()));
 
     // Adds the new client to the map.
-    mClientIdToClientInfoMap[client->mClientId] = std::move(client);
+    mClientIdToClientMap[client->mClientId] = client;
+
+    *outClient = client;
 
     return OK;
 }
 
-status_t TranscodingClientManager::removeClient(int32_t clientId) {
-    ALOGD("Removing client id %d", clientId);
+status_t TranscodingClientManager::removeClient(ClientIdType clientId) {
+    ALOGD("Removing client id %lld", (long long)clientId);
     std::scoped_lock lock{mLock};
 
     // Checks if the client is valid.
-    auto it = mClientIdToClientInfoMap.find(clientId);
-    if (it == mClientIdToClientInfoMap.end()) {
-        ALOGE("Client id %d does not exist", clientId);
+    auto it = mClientIdToClientMap.find(clientId);
+    if (it == mClientIdToClientMap.end()) {
+        ALOGE("Client id %lld does not exist", (long long)clientId);
         return INVALID_OPERATION;
     }
 
-    std::shared_ptr<ITranscodingServiceClient> client = it->second->mClient;
+    SpAIBinder callback = it->second->mClientCallback;
 
     // Check if the client still live. If alive, unlink the death.
-    if (client) {
-        AIBinder_unlinkToDeath(client->asBinder().get(), mDeathRecipient.get(),
-                               reinterpret_cast<void*>(clientId));
+    if (callback.get() != nullptr) {
+        AIBinder_unlinkToDeath(callback.get(), mDeathRecipient.get(),
+                               reinterpret_cast<void*>(it->second.get()));
     }
 
     // Erase the entry.
-    mClientIdToClientInfoMap.erase(it);
+    mClientIdToClientMap.erase(it);
 
     return OK;
 }
 
 size_t TranscodingClientManager::getNumOfClients() const {
     std::scoped_lock lock{mLock};
-    return mClientIdToClientInfoMap.size();
+    return mClientIdToClientMap.size();
 }
 
 }  // namespace android
diff --git a/media/libmediatranscoding/TranscodingJobScheduler.cpp b/media/libmediatranscoding/TranscodingJobScheduler.cpp
new file mode 100644
index 0000000..9dd070c
--- /dev/null
+++ b/media/libmediatranscoding/TranscodingJobScheduler.cpp
@@ -0,0 +1,369 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// #define LOG_NDEBUG 0
+#define LOG_TAG "TranscodingJobScheduler"
+
+#define VALIDATE_STATE 1
+
+#include <inttypes.h>
+#include <media/TranscodingJobScheduler.h>
+#include <utils/Log.h>
+
+#include <utility>
+
+namespace android {
+
+constexpr static pid_t OFFLINE_PID = -1;
+
+//static
+String8 TranscodingJobScheduler::jobToString(const JobKeyType& jobKey) {
+    return String8::format("{client:%lld, job:%d}", (long long)jobKey.first, jobKey.second);
+}
+
+TranscodingJobScheduler::TranscodingJobScheduler(
+        const std::shared_ptr<TranscoderInterface>& transcoder,
+        const std::shared_ptr<ProcessInfoInterface>& procInfo)
+      : mTranscoder(transcoder), mProcInfo(procInfo), mCurrentJob(nullptr), mResourceLost(false) {
+    // Only push empty offline queue initially. Realtime queues are added when requests come in.
+    mPidSortedList.push_back(OFFLINE_PID);
+    mOfflinePidIterator = mPidSortedList.begin();
+    mJobQueues.emplace(OFFLINE_PID, JobQueueType());
+}
+
+TranscodingJobScheduler::~TranscodingJobScheduler() {}
+
+TranscodingJobScheduler::Job* TranscodingJobScheduler::getTopJob_l() {
+    if (mJobMap.empty()) {
+        return nullptr;
+    }
+    pid_t topPid = *mPidSortedList.begin();
+    JobKeyType topJobKey = *mJobQueues[topPid].begin();
+    return &mJobMap[topJobKey];
+}
+
+void TranscodingJobScheduler::updateCurrentJob_l() {
+    Job* topJob = getTopJob_l();
+    Job* curJob = mCurrentJob;
+    ALOGV("updateCurrentJob: topJob is %s, curJob is %s",
+          topJob == nullptr ? "null" : jobToString(topJob->key).c_str(),
+          curJob == nullptr ? "null" : jobToString(curJob->key).c_str());
+
+    // If we found a topJob that should be run, and it's not already running,
+    // take some actions to ensure it's running.
+    if (topJob != nullptr && (topJob != curJob || topJob->state != Job::RUNNING)) {
+        // If another job is currently running, pause it first.
+        if (curJob != nullptr && curJob->state == Job::RUNNING) {
+            mTranscoder->pause(curJob->key.first, curJob->key.second);
+            curJob->state = Job::PAUSED;
+        }
+        // If we are not experiencing resource loss, we can start or resume
+        // the topJob now.
+        if (!mResourceLost) {
+            if (topJob->state == Job::NOT_STARTED) {
+                mTranscoder->start(topJob->key.first, topJob->key.second);
+            } else if (topJob->state == Job::PAUSED) {
+                mTranscoder->resume(topJob->key.first, topJob->key.second);
+            }
+            topJob->state = Job::RUNNING;
+        }
+    }
+    mCurrentJob = topJob;
+}
+
+void TranscodingJobScheduler::removeJob_l(const JobKeyType& jobKey) {
+    ALOGV("%s: job %s", __FUNCTION__, jobToString(jobKey).c_str());
+
+    if (mJobMap.count(jobKey) == 0) {
+        ALOGE("job %s doesn't exist", jobToString(jobKey).c_str());
+        return;
+    }
+
+    // Remove job from pid's queue.
+    const pid_t pid = mJobMap[jobKey].pid;
+    JobQueueType& jobQueue = mJobQueues[pid];
+    auto it = std::find(jobQueue.begin(), jobQueue.end(), jobKey);
+    if (it == jobQueue.end()) {
+        ALOGE("couldn't find job %s in queue for pid %d", jobToString(jobKey).c_str(), pid);
+        return;
+    }
+    jobQueue.erase(it);
+
+    // If this is the last job in a real-time queue, remove this pid's queue.
+    if (pid != OFFLINE_PID && jobQueue.empty()) {
+        mPidSortedList.remove(pid);
+        mJobQueues.erase(pid);
+    }
+
+    // Clear current job.
+    if (mCurrentJob == &mJobMap[jobKey]) {
+        mCurrentJob = nullptr;
+    }
+
+    // Remove job from job map.
+    mJobMap.erase(jobKey);
+}
+
+bool TranscodingJobScheduler::submit(ClientIdType clientId, int32_t jobId, pid_t pid,
+                                     const TranscodingRequestParcel& request,
+                                     const std::weak_ptr<ITranscodingClientCallback>& callback) {
+    JobKeyType jobKey = std::make_pair(clientId, jobId);
+
+    ALOGV("%s: job %s, pid %d, prioirty %d", __FUNCTION__, jobToString(jobKey).c_str(), pid,
+          (int32_t)request.priority);
+
+    std::scoped_lock lock{mLock};
+
+    if (mJobMap.count(jobKey) > 0) {
+        ALOGE("job %s already exists", jobToString(jobKey).c_str());
+        return false;
+    }
+
+    // TODO(chz): only support offline vs real-time for now. All kUnspecified jobs
+    // go to offline queue.
+    if (request.priority == TranscodingJobPriority::kUnspecified) {
+        pid = OFFLINE_PID;
+    }
+
+    // Add job to job map.
+    mJobMap[jobKey].key = jobKey;
+    mJobMap[jobKey].pid = pid;
+    mJobMap[jobKey].state = Job::NOT_STARTED;
+    mJobMap[jobKey].request = request;
+    mJobMap[jobKey].callback = callback;
+
+    // If it's an offline job, the queue was already added in constructor.
+    // If it's a real-time jobs, check if a queue is already present for the pid,
+    // and add a new queue if needed.
+    if (pid != OFFLINE_PID) {
+        if (mJobQueues.count(pid) == 0) {
+            if (mProcInfo->isProcessOnTop(pid)) {
+                mPidSortedList.push_front(pid);
+            } else {
+                // Shouldn't be submitting real-time requests from non-top app,
+                // put it in front of the offline queue.
+                mPidSortedList.insert(mOfflinePidIterator, pid);
+            }
+        } else if (pid != *mPidSortedList.begin()) {
+            if (mProcInfo->isProcessOnTop(pid)) {
+                mPidSortedList.remove(pid);
+                mPidSortedList.push_front(pid);
+            }
+        }
+    }
+    // Append this job to the pid's queue.
+    mJobQueues[pid].push_back(jobKey);
+
+    updateCurrentJob_l();
+
+    validateState_l();
+    return true;
+}
+
+bool TranscodingJobScheduler::cancel(ClientIdType clientId, int32_t jobId) {
+    JobKeyType jobKey = std::make_pair(clientId, jobId);
+
+    ALOGV("%s: job %s", __FUNCTION__, jobToString(jobKey).c_str());
+
+    std::scoped_lock lock{mLock};
+
+    if (mJobMap.count(jobKey) == 0) {
+        ALOGE("job %s doesn't exist", jobToString(jobKey).c_str());
+        return false;
+    }
+    // If the job is running, pause it first.
+    if (mJobMap[jobKey].state == Job::RUNNING) {
+        mTranscoder->pause(clientId, jobId);
+    }
+
+    // Remove the job.
+    removeJob_l(jobKey);
+
+    // Start next job.
+    updateCurrentJob_l();
+
+    validateState_l();
+    return true;
+}
+
+bool TranscodingJobScheduler::getJob(ClientIdType clientId, int32_t jobId,
+                                     TranscodingRequestParcel* request) {
+    JobKeyType jobKey = std::make_pair(clientId, jobId);
+
+    std::scoped_lock lock{mLock};
+
+    if (mJobMap.count(jobKey) == 0) {
+        ALOGE("job %s doesn't exist", jobToString(jobKey).c_str());
+        return false;
+    }
+
+    *(TranscodingRequest*)request = mJobMap[jobKey].request;
+    return true;
+}
+
+void TranscodingJobScheduler::onFinish(ClientIdType clientId, int32_t jobId) {
+    JobKeyType jobKey = std::make_pair(clientId, jobId);
+
+    ALOGV("%s: job %s", __FUNCTION__, jobToString(jobKey).c_str());
+
+    std::scoped_lock lock{mLock};
+
+    if (mJobMap.count(jobKey) == 0) {
+        ALOGW("ignoring abort for non-existent job");
+        return;
+    }
+
+    // Only ignore if job was never started. In particular, propagate the status
+    // to client if the job is paused. Transcoder could have posted finish when
+    // we're pausing it, and the finish arrived after we changed current job.
+    if (mJobMap[jobKey].state == Job::NOT_STARTED) {
+        ALOGW("ignoring abort for job that was never started");
+        return;
+    }
+
+    {
+        auto clientCallback = mJobMap[jobKey].callback.lock();
+        if (clientCallback != nullptr) {
+            clientCallback->onTranscodingFinished(jobId, TranscodingResultParcel({jobId, 0}));
+        }
+    }
+
+    // Remove the job.
+    removeJob_l(jobKey);
+
+    // Start next job.
+    updateCurrentJob_l();
+
+    validateState_l();
+}
+
+void TranscodingJobScheduler::onError(int64_t clientId, int32_t jobId, TranscodingErrorCode err) {
+    JobKeyType jobKey = std::make_pair(clientId, jobId);
+
+    ALOGV("%s: job %s, err %d", __FUNCTION__, jobToString(jobKey).c_str(), (int32_t)err);
+
+    std::scoped_lock lock{mLock};
+
+    if (mJobMap.count(jobKey) == 0) {
+        ALOGW("ignoring abort for non-existent job");
+        return;
+    }
+
+    // Only ignore if job was never started. In particular, propagate the status
+    // to client if the job is paused. Transcoder could have posted finish when
+    // we're pausing it, and the finish arrived after we changed current job.
+    if (mJobMap[jobKey].state == Job::NOT_STARTED) {
+        ALOGW("ignoring abort for job that was never started");
+        return;
+    }
+
+    {
+        auto clientCallback = mJobMap[jobKey].callback.lock();
+        if (clientCallback != nullptr) {
+            clientCallback->onTranscodingFailed(jobId, err);
+        }
+    }
+
+    // Remove the job.
+    removeJob_l(jobKey);
+
+    // Start next job.
+    updateCurrentJob_l();
+
+    validateState_l();
+}
+
+void TranscodingJobScheduler::onResourceLost() {
+    ALOGV("%s", __FUNCTION__);
+
+    std::scoped_lock lock{mLock};
+
+    // If we receive a resource loss event, the TranscoderLibrary already paused
+    // the transcoding, so we don't need to call onPaused to notify it to pause.
+    // Only need to update the job state here.
+    if (mCurrentJob != nullptr && mCurrentJob->state == Job::RUNNING) {
+        mCurrentJob->state = Job::PAUSED;
+    }
+    mResourceLost = true;
+
+    validateState_l();
+}
+
+void TranscodingJobScheduler::onTopProcessChanged(pid_t pid) {
+    ALOGV("%s: pid %d", __FUNCTION__, pid);
+
+    std::scoped_lock lock{mLock};
+
+    if (pid < 0) {
+        ALOGW("bringProcessToTop: ignoring invalid pid %d", pid);
+        return;
+    }
+    // If this pid doesn't have any jobs, we don't care about it.
+    if (mJobQueues.count(pid) == 0) {
+        ALOGW("bringProcessToTop: ignoring pid %d without any jobs", pid);
+        return;
+    }
+    // If this pid is already top, don't do anything.
+    if (pid == *mPidSortedList.begin()) {
+        ALOGW("pid %d is already top", pid);
+        return;
+    }
+
+    mPidSortedList.remove(pid);
+    mPidSortedList.push_front(pid);
+
+    updateCurrentJob_l();
+
+    validateState_l();
+}
+
+void TranscodingJobScheduler::onResourceAvailable() {
+    ALOGV("%s", __FUNCTION__);
+
+    std::scoped_lock lock{mLock};
+
+    mResourceLost = false;
+    updateCurrentJob_l();
+
+    validateState_l();
+}
+
+void TranscodingJobScheduler::validateState_l() {
+#ifdef VALIDATE_STATE
+    LOG_ALWAYS_FATAL_IF(mJobQueues.count(OFFLINE_PID) != 1,
+                        "mJobQueues offline queue number is not 1");
+    LOG_ALWAYS_FATAL_IF(*mOfflinePidIterator != OFFLINE_PID,
+                        "mOfflinePidIterator not pointing to offline pid");
+    LOG_ALWAYS_FATAL_IF(mPidSortedList.size() != mJobQueues.size(),
+                        "mPidList and mJobQueues size mismatch");
+
+    int32_t totalJobs = 0;
+    for (auto pidIt = mPidSortedList.begin(); pidIt != mPidSortedList.end(); pidIt++) {
+        LOG_ALWAYS_FATAL_IF(mJobQueues.count(*pidIt) != 1, "mJobQueues count for pid %d is not 1",
+                            *pidIt);
+        for (auto jobIt = mJobQueues[*pidIt].begin(); jobIt != mJobQueues[*pidIt].end(); jobIt++) {
+            LOG_ALWAYS_FATAL_IF(mJobMap.count(*jobIt) != 1, "mJobs count for job %s is not 1",
+                                jobToString(*jobIt).c_str());
+        }
+
+        totalJobs += mJobQueues[*pidIt].size();
+    }
+    LOG_ALWAYS_FATAL_IF(mJobMap.size() != totalJobs,
+                        "mJobs size doesn't match total jobs counted from pid queues");
+#endif  // VALIDATE_STATE
+}
+
+}  // namespace android
diff --git a/media/libmediatranscoding/aidl/android/media/IMediaTranscodingService.aidl b/media/libmediatranscoding/aidl/android/media/IMediaTranscodingService.aidl
index 07b6c1a..40ca2c2 100644
--- a/media/libmediatranscoding/aidl/android/media/IMediaTranscodingService.aidl
+++ b/media/libmediatranscoding/aidl/android/media/IMediaTranscodingService.aidl
@@ -16,9 +16,10 @@
 
 package android.media;
 
+import android.media.ITranscodingClient;
+import android.media.ITranscodingClientCallback;
 import android.media.TranscodingJobParcel;
 import android.media.TranscodingRequestParcel;
-import android.media.ITranscodingServiceClient;
 
 /**
  * Binder interface for MediaTranscodingService.
@@ -48,64 +49,29 @@
     /**
      * Register the client with the MediaTranscodingService.
      *
-     * Client must call this function to register itself with the service in order to perform
-     * transcoding. This function will return a unique positive Id assigned by the service.
-     * Client should save this Id and use it for all the transaction with the service.
+     * Client must call this function to register itself with the service in
+     * order to perform transcoding tasks. This function will return an
+     * ITranscodingClient interface object. The client should save and use it
+     * for all future transactions with the service.
      *
-     * @param client interface for the MediaTranscodingService to call the client.
+     * @param callback client interface for the MediaTranscodingService to call
+     *        the client.
+     * @param clientName name of the client.
      * @param opPackageName op package name of the client.
      * @param clientUid user id of the client.
      * @param clientPid process id of the client.
-     * @return a unique positive Id assigned to the client by the service, -1  means failed to
-     * register.
+     * @return an ITranscodingClient interface object, with nullptr indicating
+     *         failure to register.
      */
-    int registerClient(in ITranscodingServiceClient client,
-                       in String opPackageName,
-                       in int clientUid,
-                       in int clientPid);
-
-    /**
-    * Unregister the client with the MediaTranscodingService.
-    *
-    * Client will not be able to perform any more transcoding after unregister.
-    *
-    * @param clientId assigned Id of the client.
-    * @return true if succeeds, false otherwise.
-    */
-    boolean unregisterClient(in int clientId);
+    ITranscodingClient registerClient(
+            in ITranscodingClientCallback callback,
+            in String clientName,
+            in String opPackageName,
+            in int clientUid,
+            in int clientPid);
 
     /**
     * Returns the number of clients. This is used for debugging.
     */
     int getNumOfClients();
-
-    /**
-     * Submits a transcoding request to MediaTranscodingService.
-     *
-     * @param clientId assigned Id of the client.
-     * @param request a TranscodingRequest contains transcoding configuration.
-     * @param job(output variable) a TranscodingJob generated by the MediaTranscodingService.
-     * @return a unique positive jobId generated by the MediaTranscodingService, -1 means failure.
-     */
-    int submitRequest(in int clientId,
-                      in TranscodingRequestParcel request,
-                      out TranscodingJobParcel job);
-
-    /**
-     * Cancels a transcoding job.
-     *
-     * @param clientId assigned id of the client.
-     * @param jobId a TranscodingJob generated by the MediaTranscodingService.
-     * @return true if succeeds, false otherwise.
-     */
-    boolean cancelJob(in int clientId, in int jobId);
-
-    /**
-     * Queries the job detail associated with a jobId.
-     *
-     * @param jobId a TranscodingJob generated by the MediaTranscodingService.
-     * @param job(output variable) the TranscodingJob associated with the jobId.
-     * @return true if succeeds, false otherwise.
-     */
-    boolean getJobWithId(in int jobId, out TranscodingJobParcel job);
 }
diff --git a/media/libmediatranscoding/aidl/android/media/ITranscodingClient.aidl b/media/libmediatranscoding/aidl/android/media/ITranscodingClient.aidl
new file mode 100644
index 0000000..37b5147
--- /dev/null
+++ b/media/libmediatranscoding/aidl/android/media/ITranscodingClient.aidl
@@ -0,0 +1,63 @@
+/**
+ * Copyright (c) 2020, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+package android.media;
+
+import android.media.TranscodingJobParcel;
+import android.media.TranscodingRequestParcel;
+
+/**
+ * ITranscodingClient
+ *
+ * Interface for a client to communicate with MediaTranscodingService.
+ *
+ * {@hide}
+ */
+interface ITranscodingClient {
+    /**
+     * Submits a transcoding request to MediaTranscodingService.
+     *
+     * @param request a TranscodingRequest contains transcoding configuration.
+     * @param job(output variable) a TranscodingJob generated by the MediaTranscodingService.
+     * @return true if success, false otherwise.
+     */
+    boolean submitRequest(in TranscodingRequestParcel request,
+                          out TranscodingJobParcel job);
+
+    /**
+     * Cancels a transcoding job.
+     *
+     * @param jobId a TranscodingJob generated by the MediaTranscodingService.
+     * @return true if succeeds, false otherwise.
+     */
+    boolean cancelJob(in int jobId);
+
+    /**
+     * Queries the job detail associated with a jobId.
+     *
+     * @param jobId a TranscodingJob generated by the MediaTranscodingService.
+     * @param job(output variable) the TranscodingJob associated with the jobId.
+     * @return true if succeeds, false otherwise.
+     */
+    boolean getJobWithId(in int jobId, out TranscodingJobParcel job);
+
+    /**
+    * Unregister the client with the MediaTranscodingService.
+    *
+    * Client will not be able to perform any more transcoding after unregister.
+    */
+    void unregister();
+}
diff --git a/media/libmediatranscoding/aidl/android/media/ITranscodingServiceClient.aidl b/media/libmediatranscoding/aidl/android/media/ITranscodingClientCallback.aidl
similarity index 90%
rename from media/libmediatranscoding/aidl/android/media/ITranscodingServiceClient.aidl
rename to media/libmediatranscoding/aidl/android/media/ITranscodingClientCallback.aidl
index e23c833..e810f1e 100644
--- a/media/libmediatranscoding/aidl/android/media/ITranscodingServiceClient.aidl
+++ b/media/libmediatranscoding/aidl/android/media/ITranscodingClientCallback.aidl
@@ -21,17 +21,13 @@
 import android.media.TranscodingResultParcel;
 
 /**
- * ITranscodingServiceClient interface for the MediaTranscodingervice to communicate with the
- * client.
+ * ITranscodingClientCallback
+ *
+ * Interface for the MediaTranscodingService to communicate with the client.
  *
  * {@hide}
  */
-//TODO(hkuang): Implement the interface.
-interface ITranscodingServiceClient {
-    /**
-     * Retrieves the name of the client.
-     */
-    @utf8InCpp String getName();
+interface ITranscodingClientCallback {
 
     /**
     * Called when the transcoding associated with the jobId finished.
diff --git a/media/libmediatranscoding/aidl/android/media/TranscodingRequestParcel.aidl b/media/libmediatranscoding/aidl/android/media/TranscodingRequestParcel.aidl
index 7b7986d..5857482 100644
--- a/media/libmediatranscoding/aidl/android/media/TranscodingRequestParcel.aidl
+++ b/media/libmediatranscoding/aidl/android/media/TranscodingRequestParcel.aidl
@@ -39,12 +39,12 @@
     /**
      * Input source file descriptor.
      */
-    ParcelFileDescriptor inFd;
+    @nullable ParcelFileDescriptor inFd;
 
     /**
      * Output transcoded file descriptor.
      */
-    ParcelFileDescriptor outFd;
+    @nullable ParcelFileDescriptor outFd;
 
     /**
      * Priority of this transcoding. Service will schedule the transcoding based on the priority.
diff --git a/media/libmediatranscoding/build_and_run_all_unit_tests.sh b/media/libmediatranscoding/build_and_run_all_unit_tests.sh
new file mode 100755
index 0000000..388e2ea
--- /dev/null
+++ b/media/libmediatranscoding/build_and_run_all_unit_tests.sh
@@ -0,0 +1,31 @@
+#!/bin/bash
+#
+# Script to run all transcoding related tests from subfolders.
+# Run script from this folder.
+#
+
+if [ -z "$ANDROID_BUILD_TOP" ]; then
+    echo "Android build environment not set"
+    exit -1
+fi
+
+# ensure we have mm
+. $ANDROID_BUILD_TOP/build/envsetup.sh
+
+mm
+
+echo "waiting for device"
+
+adb root && adb wait-for-device remount && adb sync
+SYNC_FINISHED=true
+
+# Run the transcoding service tests.
+pushd tests
+. build_and_run_all_unit_tests.sh
+popd
+
+# Run the transcoder tests.
+pushd transcoder/tests/
+. build_and_run_all_unit_tests.sh
+popd
+
diff --git a/media/libmediatranscoding/include/media/AdjustableMaxPriorityQueue.h b/media/libmediatranscoding/include/media/AdjustableMaxPriorityQueue.h
index 0e8dcfd..9ca2ee9 100644
--- a/media/libmediatranscoding/include/media/AdjustableMaxPriorityQueue.h
+++ b/media/libmediatranscoding/include/media/AdjustableMaxPriorityQueue.h
@@ -38,7 +38,7 @@
  */
 template <class T, class Comparator = std::less<T>>
 class AdjustableMaxPriorityQueue {
-   public:
+public:
     typedef typename std::vector<T>::iterator iterator;
     typedef typename std::vector<T>::const_iterator const_iterator;
 
@@ -104,7 +104,7 @@
     /* Return the backbone storage of this PriorityQueue. Mainly used for debugging. */
     const std::vector<T>& getStorage() const { return mHeap; };
 
-   private:
+private:
     std::vector<T> mHeap;
 
     /* Implementation shared by both public push() methods. */
diff --git a/media/libmediatranscoding/include/media/ProcessInfoInterface.h b/media/libmediatranscoding/include/media/ProcessInfoInterface.h
new file mode 100644
index 0000000..ef79266
--- /dev/null
+++ b/media/libmediatranscoding/include/media/ProcessInfoInterface.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_MEDIA_PROCESS_INFO_INTERFACE_H
+#define ANDROID_MEDIA_PROCESS_INFO_INTERFACE_H
+
+namespace android {
+
+// Interface for the scheduler to query a process's info.
+class ProcessInfoInterface {
+public:
+    // Determines if a process is currently running as top process.
+    // TODO(chz): this should probably be replaced by a query that determines
+    // which pid has the highest priority among a given set of pids. For now,
+    // we assume that there is a way to determine based on a pid number whether
+    // that pid is on "top", but this may not be possible in some cases, for
+    // example, the client process with highest priority is actually a foreground
+    // service (serving the top-app), but technically is not "top".
+    virtual bool isProcessOnTop(pid_t pid) = 0;
+
+protected:
+    virtual ~ProcessInfoInterface() = default;
+};
+
+// Interface for notifying the scheduler of a change in a process's state or
+// transcoding resource availability.
+class ProcessInfoCallbackInterface {
+public:
+    // Called when a process with pid is brought to top.
+    // TODO(chz): this should probably be replace by a callback when the pid
+    // that was previously identified being the highest priority as in
+    // ProcessInfoInterface::isProcessOnTop() has changed in priority.
+    virtual void onTopProcessChanged(pid_t pid) = 0;
+
+    // Called when resources become available for transcoding use. The scheduler
+    // may use this as a signal to attempt restart transcoding activity that
+    // were previously paused due to temporary resource loss.
+    virtual void onResourceAvailable() = 0;
+
+protected:
+    virtual ~ProcessInfoCallbackInterface() = default;
+};
+
+}  // namespace android
+#endif  // ANDROID_MEDIA_PROCESS_INFO_INTERFACE_H
diff --git a/media/libmediatranscoding/include/media/SchedulerClientInterface.h b/media/libmediatranscoding/include/media/SchedulerClientInterface.h
new file mode 100644
index 0000000..b4cf463
--- /dev/null
+++ b/media/libmediatranscoding/include/media/SchedulerClientInterface.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_MEDIA_SCHEDULER_CLIENT_INTERFACE_H
+#define ANDROID_MEDIA_SCHEDULER_CLIENT_INTERFACE_H
+
+#include <aidl/android/media/ITranscodingClientCallback.h>
+#include <aidl/android/media/TranscodingRequestParcel.h>
+
+namespace android {
+
+using ::aidl::android::media::ITranscodingClientCallback;
+using ::aidl::android::media::TranscodingRequestParcel;
+
+using ClientIdType = int64_t;
+
+// Interface for a client to call the scheduler to schedule or retrieve
+// the status of a job.
+class SchedulerClientInterface {
+public:
+    virtual bool submit(ClientIdType clientId, int32_t jobId, pid_t pid,
+                        const TranscodingRequestParcel& request,
+                        const std::weak_ptr<ITranscodingClientCallback>& clientCallback) = 0;
+
+    virtual bool cancel(ClientIdType clientId, int32_t jobId) = 0;
+
+    virtual bool getJob(ClientIdType clientId, int32_t jobId,
+                        TranscodingRequestParcel* request) = 0;
+
+protected:
+    virtual ~SchedulerClientInterface() = default;
+};
+
+}  // namespace android
+#endif  // ANDROID_MEDIA_SCHEDULER_CLIENT_INTERFACE_H
diff --git a/media/libmediatranscoding/include/media/TranscoderInterface.h b/media/libmediatranscoding/include/media/TranscoderInterface.h
new file mode 100644
index 0000000..d74135a
--- /dev/null
+++ b/media/libmediatranscoding/include/media/TranscoderInterface.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_MEDIA_TRANSCODER_INTERFACE_H
+#define ANDROID_MEDIA_TRANSCODER_INTERFACE_H
+
+#include <aidl/android/media/TranscodingErrorCode.h>
+
+namespace android {
+
+using ::aidl::android::media::TranscodingErrorCode;
+
+// Interface for the scheduler to call the transcoder to take actions.
+class TranscoderInterface {
+public:
+    // TODO(chz): determine what parameters are needed here.
+    // For now, always pass in clientId&jobId.
+    virtual void start(int64_t clientId, int32_t jobId) = 0;
+    virtual void pause(int64_t clientId, int32_t jobId) = 0;
+    virtual void resume(int64_t clientId, int32_t jobId) = 0;
+
+protected:
+    virtual ~TranscoderInterface() = default;
+};
+
+// Interface for the transcoder to notify the scheduler of the status of
+// the currently running job, or temporary loss of transcoding resources.
+class TranscoderCallbackInterface {
+public:
+    // TODO(chz): determine what parameters are needed here.
+    virtual void onFinish(int64_t clientId, int32_t jobId) = 0;
+    virtual void onError(int64_t clientId, int32_t jobId, TranscodingErrorCode err) = 0;
+
+    // Called when transcoding becomes temporarily inaccessible due to loss of resource.
+    // If there is any job currently running, it will be paused. When resource contention
+    // is solved, the scheduler should call TranscoderInterface's to either start a new job,
+    // or resume a paused job.
+    virtual void onResourceLost() = 0;
+
+protected:
+    virtual ~TranscoderCallbackInterface() = default;
+};
+
+}  // namespace android
+#endif  // ANDROID_MEDIA_TRANSCODER_INTERFACE_H
diff --git a/media/libmediatranscoding/include/media/TranscodingClientManager.h b/media/libmediatranscoding/include/media/TranscodingClientManager.h
index eec120a..d8176bf 100644
--- a/media/libmediatranscoding/include/media/TranscodingClientManager.h
+++ b/media/libmediatranscoding/include/media/TranscodingClientManager.h
@@ -17,22 +17,22 @@
 #ifndef ANDROID_MEDIA_TRANSCODING_CLIENT_MANAGER_H
 #define ANDROID_MEDIA_TRANSCODING_CLIENT_MANAGER_H
 
-#include <aidl/android/media/BnTranscodingServiceClient.h>
-#include <android/binder_ibinder.h>
+#include <aidl/android/media/ITranscodingClient.h>
+#include <aidl/android/media/ITranscodingClientCallback.h>
 #include <sys/types.h>
 #include <utils/Condition.h>
-#include <utils/RefBase.h>
 #include <utils/String8.h>
 #include <utils/Vector.h>
 
 #include <mutex>
 #include <unordered_map>
 
+#include "SchedulerClientInterface.h"
+
 namespace android {
 
-using ::aidl::android::media::ITranscodingServiceClient;
-
-class MediaTranscodingService;
+using ::aidl::android::media::ITranscodingClient;
+using ::aidl::android::media::ITranscodingClientCallback;
 
 /*
  * TranscodingClientManager manages all the transcoding clients across different processes.
@@ -46,44 +46,51 @@
  * TODO(hkuang): Hook up with MediaMetrics to log all the transactions.
  */
 class TranscodingClientManager {
-   public:
+public:
     virtual ~TranscodingClientManager();
 
     /**
-     * ClientInfo contains a single client's information.
-     */
-    struct ClientInfo {
-        /* The remote client that this ClientInfo is associated with. */
-        std::shared_ptr<ITranscodingServiceClient> mClient;
-        /* A unique positive Id assigned to the client by the service. */
-        int32_t mClientId;
-        /* Process id of the client */
-        int32_t mClientPid;
-        /* User id of the client. */
-        int32_t mClientUid;
-        /* Package name of the client. */
-        std::string mClientOpPackageName;
-
-        ClientInfo(const std::shared_ptr<ITranscodingServiceClient>& client, int64_t clientId,
-                   int32_t pid, int32_t uid, const std::string& opPackageName)
-            : mClient(client),
-              mClientId(clientId),
-              mClientPid(pid),
-              mClientUid(uid),
-              mClientOpPackageName(opPackageName) {}
-    };
-
-    /**
      * Adds a new client to the manager.
      *
-     * The client must have valid clientId, pid, uid and opPackageName, otherwise, this will return
-     * a non-zero errorcode. If the client has already been added, it will also return non-zero
-     * errorcode.
+     * The client must have valid callback, pid, uid, clientName and opPackageName.
+     * Otherwise, this will return a non-zero errorcode. If the client callback has
+     * already been added, it will also return non-zero errorcode.
      *
-     * @param client to be added to the manager.
+     * @param callback client callback for the service to call this client.
+     * @param pid client's process id.
+     * @param uid client's user id.
+     * @param clientName client's name.
+     * @param opPackageName client's package name.
+     * @param client output holding the ITranscodingClient interface for the client
+     *        to use for subsequent communications with the service.
      * @return 0 if client is added successfully, non-zero errorcode otherwise.
      */
-    status_t addClient(std::unique_ptr<ClientInfo> client);
+    status_t addClient(const std::shared_ptr<ITranscodingClientCallback>& callback, pid_t pid,
+                       uid_t uid, const std::string& clientName, const std::string& opPackageName,
+                       std::shared_ptr<ITranscodingClient>* client);
+
+    /**
+     * Gets the number of clients.
+     */
+    size_t getNumOfClients() const;
+
+    /**
+     * Dump all the client information to the fd.
+     */
+    void dumpAllClients(int fd, const Vector<String16>& args);
+
+private:
+    friend class MediaTranscodingService;
+    friend class TranscodingClientManagerTest;
+    struct ClientImpl;
+
+    // Only allow MediaTranscodingService and unit tests to instantiate.
+    TranscodingClientManager(const std::shared_ptr<SchedulerClientInterface>& scheduler);
+
+    /**
+     * Checks if a client with clientId is already registered.
+     */
+    bool isClientIdRegistered(ClientIdType clientId) const;
 
     /**
      * Removes an existing client from the manager.
@@ -93,39 +100,17 @@
      * @param clientId id of the client to be removed..
      * @return 0 if client is removed successfully, non-zero errorcode otherwise.
      */
-    status_t removeClient(int32_t clientId);
-
-    /**
-     * Gets the number of clients.
-     */
-    size_t getNumOfClients() const;
-
-    /**
-     * Checks if a client with clientId is already registered.
-     */
-    bool isClientIdRegistered(int32_t clientId) const;
-
-    /**
-     * Dump all the client information to the fd.
-     */
-    void dumpAllClients(int fd, const Vector<String16>& args);
-
-   private:
-    friend class MediaTranscodingService;
-    friend class TranscodingClientManagerTest;
-
-    /** Get the singleton instance of the TranscodingClientManager. */
-    static TranscodingClientManager& getInstance();
-
-    TranscodingClientManager();
+    status_t removeClient(ClientIdType clientId);
 
     static void BinderDiedCallback(void* cookie);
 
     mutable std::mutex mLock;
-    std::unordered_map<int32_t, std::unique_ptr<ClientInfo>> mClientIdToClientInfoMap
+    std::unordered_map<ClientIdType, std::shared_ptr<ClientImpl>> mClientIdToClientMap
             GUARDED_BY(mLock);
 
     ::ndk::ScopedAIBinder_DeathRecipient mDeathRecipient;
+
+    std::shared_ptr<SchedulerClientInterface> mJobScheduler;
 };
 
 }  // namespace android
diff --git a/media/libmediatranscoding/include/media/TranscodingJobScheduler.h b/media/libmediatranscoding/include/media/TranscodingJobScheduler.h
new file mode 100644
index 0000000..f4d98ba
--- /dev/null
+++ b/media/libmediatranscoding/include/media/TranscodingJobScheduler.h
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_MEDIA_TRANSCODING_JOB_SCHEDULER_H
+#define ANDROID_MEDIA_TRANSCODING_JOB_SCHEDULER_H
+
+#include <aidl/android/media/TranscodingJobPriority.h>
+#include <media/ProcessInfoInterface.h>
+#include <media/SchedulerClientInterface.h>
+#include <media/TranscoderInterface.h>
+#include <media/TranscodingRequest.h>
+#include <utils/String8.h>
+
+#include <list>
+#include <map>
+#include <mutex>
+
+namespace android {
+using ::aidl::android::media::TranscodingJobPriority;
+using ::aidl::android::media::TranscodingResultParcel;
+
+class TranscodingJobScheduler : public ProcessInfoCallbackInterface,
+                                public SchedulerClientInterface,
+                                public TranscoderCallbackInterface {
+public:
+    virtual ~TranscodingJobScheduler();
+
+    // SchedulerClientInterface
+    bool submit(ClientIdType clientId, int32_t jobId, pid_t pid,
+                const TranscodingRequestParcel& request,
+                const std::weak_ptr<ITranscodingClientCallback>& clientCallback) override;
+    bool cancel(ClientIdType clientId, int32_t jobId) override;
+    bool getJob(ClientIdType clientId, int32_t jobId, TranscodingRequestParcel* request) override;
+    // ~SchedulerClientInterface
+
+    // TranscoderCallbackInterface
+    void onFinish(ClientIdType clientId, int32_t jobId) override;
+    void onError(int64_t clientId, int32_t jobId, TranscodingErrorCode err) override;
+    void onResourceLost() override;
+    // ~TranscoderCallbackInterface
+
+    // ProcessInfoCallbackInterface
+    void onTopProcessChanged(int32_t pid) override;
+    void onResourceAvailable() override;
+    // ~ProcessInfoCallbackInterface
+
+private:
+    friend class MediaTranscodingService;
+    friend class TranscodingJobSchedulerTest;
+
+    using JobKeyType = std::pair<ClientIdType, int32_t /*jobId*/>;
+    using JobQueueType = std::list<JobKeyType>;
+
+    struct Job {
+        JobKeyType key;
+        pid_t pid;
+        enum JobState {
+            NOT_STARTED,
+            RUNNING,
+            PAUSED,
+        } state;
+        TranscodingRequest request;
+        std::weak_ptr<ITranscodingClientCallback> callback;
+    };
+
+    // TODO(chz): call transcoder without global lock.
+    // Use mLock for all entrypoints for now.
+    mutable std::mutex mLock;
+
+    std::map<JobKeyType, Job> mJobMap;
+
+    // Pid->JobQueue map (pid == -1: offline queue)
+    std::map<pid_t, JobQueueType> mJobQueues;
+
+    // Pids, with the head being the most-recently-top app, 2nd item is the
+    // previous top app, etc.
+    std::list<pid_t> mPidSortedList;
+    std::list<pid_t>::iterator mOfflinePidIterator;
+
+    std::shared_ptr<TranscoderInterface> mTranscoder;
+    std::shared_ptr<ProcessInfoInterface> mProcInfo;
+
+    Job* mCurrentJob;
+    bool mResourceLost;
+
+    // Only allow MediaTranscodingService and unit tests to instantiate.
+    TranscodingJobScheduler(const std::shared_ptr<TranscoderInterface>& transcoder,
+                            const std::shared_ptr<ProcessInfoInterface>& procInfo);
+
+    Job* getTopJob_l();
+    void updateCurrentJob_l();
+    void removeJob_l(const JobKeyType& jobKey);
+
+    // Internal state verifier (debug only)
+    void validateState_l();
+
+    static String8 jobToString(const JobKeyType& jobKey);
+};
+
+}  // namespace android
+#endif  // ANDROID_MEDIA_TRANSCODING_JOB_SCHEDULER_H
diff --git a/media/libmediatranscoding/include/media/TranscodingRequest.h b/media/libmediatranscoding/include/media/TranscodingRequest.h
new file mode 100644
index 0000000..1337af3
--- /dev/null
+++ b/media/libmediatranscoding/include/media/TranscodingRequest.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_MEDIA_TRANSCODING_REQUEST_H
+#define ANDROID_MEDIA_TRANSCODING_REQUEST_H
+
+#include <aidl/android/media/TranscodingRequestParcel.h>
+
+namespace android {
+
+using ::aidl::android::media::TranscodingRequestParcel;
+
+// Helper class for duplicating a TranscodingRequestParcel
+class TranscodingRequest : public TranscodingRequestParcel {
+public:
+    TranscodingRequest() = default;
+    TranscodingRequest(const TranscodingRequestParcel& parcel) { setTo(parcel); }
+    TranscodingRequest& operator=(const TranscodingRequest& request) {
+        setTo(request);
+        return *this;
+    }
+
+private:
+    void setTo(const TranscodingRequestParcel& parcel) {
+        fileName = parcel.fileName;
+        transcodingType = parcel.transcodingType;
+        // TODO: determine if the fds need dup
+        inFd.set(dup(parcel.inFd.get()));
+        outFd.set(dup(parcel.outFd.get()));
+        priority = parcel.priority;
+        requestUpdate = parcel.requestUpdate;
+    }
+};
+
+}  // namespace android
+#endif  // ANDROID_MEDIA_TRANSCODING_REQUEST_H
diff --git a/media/libmediatranscoding/tests/AdjustableMaxPriorityQueue_tests.cpp b/media/libmediatranscoding/tests/AdjustableMaxPriorityQueue_tests.cpp
index d58af4e..2e49f32 100644
--- a/media/libmediatranscoding/tests/AdjustableMaxPriorityQueue_tests.cpp
+++ b/media/libmediatranscoding/tests/AdjustableMaxPriorityQueue_tests.cpp
@@ -36,7 +36,7 @@
 namespace android {
 
 class IntUniquePtrComp {
-   public:
+public:
     bool operator()(const std::unique_ptr<int>& lhs, const std::unique_ptr<int>& rhs) const {
         return *lhs < *rhs;
     }
@@ -233,7 +233,7 @@
     // The job is arranging according to priority with highest priority comes first.
     // For the job with the same priority, the job with early createTime will come first.
     class TranscodingJobComp {
-       public:
+    public:
         bool operator()(const std::unique_ptr<TranscodingJob>& lhs,
                         const std::unique_ptr<TranscodingJob>& rhs) const {
             if (lhs->priority != rhs->priority) {
diff --git a/media/libmediatranscoding/tests/Android.bp b/media/libmediatranscoding/tests/Android.bp
index 8191b00..904cf9b 100644
--- a/media/libmediatranscoding/tests/Android.bp
+++ b/media/libmediatranscoding/tests/Android.bp
@@ -37,6 +37,13 @@
     srcs: ["TranscodingClientManager_tests.cpp"],
 }
 
+cc_test {
+    name: "TranscodingJobScheduler_tests",
+    defaults: ["libmediatranscoding_test_defaults"],
+
+    srcs: ["TranscodingJobScheduler_tests.cpp"],
+}
+
 //
 // AdjustableMaxPriorityQueue unit test
 //
diff --git a/media/libmediatranscoding/tests/TranscodingClientManager_tests.cpp b/media/libmediatranscoding/tests/TranscodingClientManager_tests.cpp
index 5d2419d..b58c827 100644
--- a/media/libmediatranscoding/tests/TranscodingClientManager_tests.cpp
+++ b/media/libmediatranscoding/tests/TranscodingClientManager_tests.cpp
@@ -19,52 +19,52 @@
 // #define LOG_NDEBUG 0
 #define LOG_TAG "TranscodingClientManagerTest"
 
-#include <aidl/android/media/BnTranscodingServiceClient.h>
+#include <aidl/android/media/BnTranscodingClientCallback.h>
 #include <aidl/android/media/IMediaTranscodingService.h>
-#include <aidl/android/media/ITranscodingServiceClient.h>
 #include <android-base/logging.h>
 #include <android/binder_manager.h>
 #include <android/binder_process.h>
 #include <gtest/gtest.h>
+#include <media/SchedulerClientInterface.h>
 #include <media/TranscodingClientManager.h>
+#include <media/TranscodingRequest.h>
 #include <utils/Log.h>
 
+#include <list>
+
 namespace android {
 
 using Status = ::ndk::ScopedAStatus;
-using aidl::android::media::BnTranscodingServiceClient;
-using aidl::android::media::IMediaTranscodingService;
-using aidl::android::media::ITranscodingServiceClient;
+using ::aidl::android::media::BnTranscodingClientCallback;
+using ::aidl::android::media::IMediaTranscodingService;
+using ::aidl::android::media::TranscodingErrorCode;
+using ::aidl::android::media::TranscodingJobParcel;
+using ::aidl::android::media::TranscodingRequestParcel;
+using ::aidl::android::media::TranscodingResultParcel;
 
-constexpr int32_t kInvalidClientId = -1;
-constexpr int32_t kInvalidClientPid = -1;
-constexpr int32_t kInvalidClientUid = -1;
-constexpr const char* kInvalidClientOpPackageName = "";
+constexpr pid_t kInvalidClientPid = -1;
+constexpr const char* kInvalidClientName = "";
+constexpr const char* kInvalidClientPackage = "";
 
-constexpr int32_t kClientId = 1;
-constexpr int32_t kClientPid = 2;
-constexpr int32_t kClientUid = 3;
-constexpr const char* kClientOpPackageName = "TestClient";
+constexpr pid_t kClientPid = 2;
+constexpr uid_t kClientUid = 3;
+constexpr const char* kClientName = "TestClientName";
+constexpr const char* kClientPackage = "TestClientPackage";
 
-struct TestClient : public BnTranscodingServiceClient {
-    TestClient(const std::shared_ptr<IMediaTranscodingService>& service) : mService(service) {
-        ALOGD("TestClient Created");
-    }
+struct TestClientCallback : public BnTranscodingClientCallback {
+    TestClientCallback() { ALOGI("TestClientCallback Created"); }
 
-    Status getName(std::string* _aidl_return) override {
-        *_aidl_return = "test_client";
+    virtual ~TestClientCallback() { ALOGI("TestClientCallback destroyed"); };
+
+    Status onTranscodingFinished(int32_t in_jobId,
+                                 const TranscodingResultParcel& in_result) override {
+        EXPECT_EQ(in_jobId, in_result.jobId);
+        mEventQueue.push_back(Finished(in_jobId));
         return Status::ok();
     }
 
-    Status onTranscodingFinished(
-            int32_t /* in_jobId */,
-            const ::aidl::android::media::TranscodingResultParcel& /* in_result */) override {
-        return Status::ok();
-    }
-
-    Status onTranscodingFailed(
-            int32_t /* in_jobId */,
-            ::aidl::android::media::TranscodingErrorCode /*in_errorCode */) override {
+    Status onTranscodingFailed(int32_t in_jobId, TranscodingErrorCode /*in_errorCode */) override {
+        mEventQueue.push_back(Failed(in_jobId));
         return Status::ok();
     }
 
@@ -77,204 +77,371 @@
         return Status::ok();
     }
 
-    virtual ~TestClient() { ALOGI("TestClient destroyed"); };
+    struct Event {
+        enum {
+            NoEvent,
+            Finished,
+            Failed,
+        } type;
+        int32_t jobId;
+    };
 
-   private:
-    std::shared_ptr<IMediaTranscodingService> mService;
-    TestClient(const TestClient&) = delete;
-    TestClient& operator=(const TestClient&) = delete;
+    static constexpr Event NoEvent = {Event::NoEvent, 0};
+#define DECLARE_EVENT(action) \
+    static Event action(int32_t jobId) { return {Event::action, jobId}; }
+
+    DECLARE_EVENT(Finished);
+    DECLARE_EVENT(Failed);
+
+    const Event& popEvent() {
+        if (mEventQueue.empty()) {
+            mPoppedEvent = NoEvent;
+        } else {
+            mPoppedEvent = *mEventQueue.begin();
+            mEventQueue.pop_front();
+        }
+        return mPoppedEvent;
+    }
+
+private:
+    Event mPoppedEvent;
+    std::list<Event> mEventQueue;
+
+    TestClientCallback(const TestClientCallback&) = delete;
+    TestClientCallback& operator=(const TestClientCallback&) = delete;
+};
+
+bool operator==(const TestClientCallback::Event& lhs, const TestClientCallback::Event& rhs) {
+    return lhs.type == rhs.type && lhs.jobId == rhs.jobId;
+}
+
+struct TestScheduler : public SchedulerClientInterface {
+    TestScheduler() { ALOGI("TestScheduler Created"); }
+
+    virtual ~TestScheduler() { ALOGI("TestScheduler Destroyed"); }
+
+    bool submit(int64_t clientId, int32_t jobId, pid_t /*pid*/,
+                const TranscodingRequestParcel& request,
+                const std::weak_ptr<ITranscodingClientCallback>& clientCallback) override {
+        JobKeyType jobKey = std::make_pair(clientId, jobId);
+        if (mJobs.count(jobKey) > 0) {
+            return false;
+        }
+
+        // This is the secret name we'll check, to test error propagation from
+        // the scheduler back to client.
+        if (request.fileName == "bad_file") {
+            return false;
+        }
+
+        mJobs[jobKey].request = request;
+        mJobs[jobKey].callback = clientCallback;
+
+        mLastJob = jobKey;
+        return true;
+    }
+
+    bool cancel(int64_t clientId, int32_t jobId) override {
+        JobKeyType jobKey = std::make_pair(clientId, jobId);
+
+        if (mJobs.count(jobKey) == 0) {
+            return false;
+        }
+        mJobs.erase(jobKey);
+        return true;
+    }
+
+    bool getJob(int64_t clientId, int32_t jobId, TranscodingRequestParcel* request) override {
+        JobKeyType jobKey = std::make_pair(clientId, jobId);
+        if (mJobs.count(jobKey) == 0) {
+            return false;
+        }
+
+        *(TranscodingRequest*)request = mJobs[jobKey].request;
+        return true;
+    }
+
+    void finishLastJob() {
+        auto it = mJobs.find(mLastJob);
+        if (it == mJobs.end()) {
+            return;
+        }
+        {
+            auto clientCallback = it->second.callback.lock();
+            if (clientCallback != nullptr) {
+                clientCallback->onTranscodingFinished(
+                        mLastJob.second, TranscodingResultParcel({mLastJob.second, 0}));
+            }
+        }
+        mJobs.erase(it);
+    }
+
+    void abortLastJob() {
+        auto it = mJobs.find(mLastJob);
+        if (it == mJobs.end()) {
+            return;
+        }
+        {
+            auto clientCallback = it->second.callback.lock();
+            if (clientCallback != nullptr) {
+                clientCallback->onTranscodingFailed(
+                        mLastJob.second, TranscodingErrorCode::kUnknown);
+            }
+        }
+        mJobs.erase(it);
+    }
+
+    struct Job {
+        TranscodingRequest request;
+        std::weak_ptr<ITranscodingClientCallback> callback;
+    };
+
+    typedef std::pair<int64_t, int32_t> JobKeyType;
+    std::map<JobKeyType, Job> mJobs;
+    JobKeyType mLastJob;
 };
 
 class TranscodingClientManagerTest : public ::testing::Test {
-   public:
-    TranscodingClientManagerTest() : mClientManager(TranscodingClientManager::getInstance()) {
+public:
+    TranscodingClientManagerTest()
+          : mScheduler(new TestScheduler()),
+            mClientManager(new TranscodingClientManager(mScheduler)) {
         ALOGD("TranscodingClientManagerTest created");
     }
 
     void SetUp() override {
-        ::ndk::SpAIBinder binder(AServiceManager_getService("media.transcoding"));
-        mService = IMediaTranscodingService::fromBinder(binder);
-        if (mService == nullptr) {
-            ALOGE("Failed to connect to the media.trascoding service.");
-            return;
-        }
-
-        mTestClient = ::ndk::SharedRefBase::make<TestClient>(mService);
+        mClientCallback1 = ::ndk::SharedRefBase::make<TestClientCallback>();
+        mClientCallback2 = ::ndk::SharedRefBase::make<TestClientCallback>();
+        mClientCallback3 = ::ndk::SharedRefBase::make<TestClientCallback>();
     }
 
-    void TearDown() override {
-        ALOGI("TranscodingClientManagerTest tear down");
-        mService = nullptr;
-    }
+    void TearDown() override { ALOGI("TranscodingClientManagerTest tear down"); }
 
     ~TranscodingClientManagerTest() { ALOGD("TranscodingClientManagerTest destroyed"); }
 
-    TranscodingClientManager& mClientManager;
-    std::shared_ptr<ITranscodingServiceClient> mTestClient = nullptr;
-    std::shared_ptr<IMediaTranscodingService> mService = nullptr;
+    void addMultipleClients() {
+        EXPECT_EQ(mClientManager->addClient(mClientCallback1, kClientPid, kClientUid, kClientName,
+                                            kClientPackage, &mClient1),
+                  OK);
+        EXPECT_NE(mClient1, nullptr);
+
+        EXPECT_EQ(mClientManager->addClient(mClientCallback2, kClientPid, kClientUid, kClientName,
+                                            kClientPackage, &mClient2),
+                  OK);
+        EXPECT_NE(mClient2, nullptr);
+
+        EXPECT_EQ(mClientManager->addClient(mClientCallback3, kClientPid, kClientUid, kClientName,
+                                            kClientPackage, &mClient3),
+                  OK);
+        EXPECT_NE(mClient3, nullptr);
+
+        EXPECT_EQ(mClientManager->getNumOfClients(), 3);
+    }
+
+    void unregisterMultipleClients() {
+        EXPECT_TRUE(mClient1->unregister().isOk());
+        EXPECT_TRUE(mClient2->unregister().isOk());
+        EXPECT_TRUE(mClient3->unregister().isOk());
+        EXPECT_EQ(mClientManager->getNumOfClients(), 0);
+    }
+
+    std::shared_ptr<TestScheduler> mScheduler;
+    std::shared_ptr<TranscodingClientManager> mClientManager;
+    std::shared_ptr<ITranscodingClient> mClient1;
+    std::shared_ptr<ITranscodingClient> mClient2;
+    std::shared_ptr<ITranscodingClient> mClient3;
+    std::shared_ptr<TestClientCallback> mClientCallback1;
+    std::shared_ptr<TestClientCallback> mClientCallback2;
+    std::shared_ptr<TestClientCallback> mClientCallback3;
 };
 
-TEST_F(TranscodingClientManagerTest, TestAddingWithInvalidClientId) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-
-    // Create a client with invalid client id.
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client, kInvalidClientId, kClientPid, kClientUid, kClientOpPackageName);
-
-    // Add the client to the manager and expect failure.
-    status_t err = mClientManager.addClient(std::move(clientInfo));
-    EXPECT_TRUE(err != OK);
+TEST_F(TranscodingClientManagerTest, TestAddingWithInvalidClientCallback) {
+    // Add a client with null callback and expect failure.
+    std::shared_ptr<ITranscodingClient> client;
+    status_t err = mClientManager->addClient(nullptr, kClientPid, kClientUid, kClientName,
+                                             kClientPackage, &client);
+    EXPECT_EQ(err, BAD_VALUE);
 }
 
 TEST_F(TranscodingClientManagerTest, TestAddingWithInvalidClientPid) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-
-    // Create a client with invalid Pid.
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client, kClientId, kInvalidClientPid, kClientUid, kClientOpPackageName);
-
-    // Add the client to the manager and expect failure.
-    status_t err = mClientManager.addClient(std::move(clientInfo));
-    EXPECT_TRUE(err != OK);
+    // Add a client with invalid Pid and expect failure.
+    std::shared_ptr<ITranscodingClient> client;
+    status_t err = mClientManager->addClient(mClientCallback1, kInvalidClientPid, kClientUid,
+                                             kClientName, kClientPackage, &client);
+    EXPECT_EQ(err, BAD_VALUE);
 }
 
-TEST_F(TranscodingClientManagerTest, TestAddingWithInvalidClientUid) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-
-    // Create a client with invalid Uid.
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client, kClientId, kClientPid, kInvalidClientUid, kClientOpPackageName);
-
-    // Add the client to the manager and expect failure.
-    status_t err = mClientManager.addClient(std::move(clientInfo));
-    EXPECT_TRUE(err != OK);
+TEST_F(TranscodingClientManagerTest, TestAddingWithInvalidClientName) {
+    // Add a client with invalid name and expect failure.
+    std::shared_ptr<ITranscodingClient> client;
+    status_t err = mClientManager->addClient(mClientCallback1, kClientPid, kClientUid,
+                                             kInvalidClientName, kClientPackage, &client);
+    EXPECT_EQ(err, BAD_VALUE);
 }
 
 TEST_F(TranscodingClientManagerTest, TestAddingWithInvalidClientPackageName) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-
-    // Create a client with invalid packagename.
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client, kClientId, kClientPid, kClientUid, kInvalidClientOpPackageName);
-
-    // Add the client to the manager and expect failure.
-    status_t err = mClientManager.addClient(std::move(clientInfo));
-    EXPECT_TRUE(err != OK);
+    // Add a client with invalid packagename and expect failure.
+    std::shared_ptr<ITranscodingClient> client;
+    status_t err = mClientManager->addClient(mClientCallback1, kClientPid, kClientUid, kClientName,
+                                             kInvalidClientPackage, &client);
+    EXPECT_EQ(err, BAD_VALUE);
 }
 
 TEST_F(TranscodingClientManagerTest, TestAddingValidClient) {
-    std::shared_ptr<ITranscodingServiceClient> client1 =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
+    // Add a valid client, should succeed.
+    std::shared_ptr<ITranscodingClient> client;
+    status_t err = mClientManager->addClient(mClientCallback1, kClientPid, kClientUid, kClientName,
+                                             kClientPackage, &client);
+    EXPECT_EQ(err, OK);
+    EXPECT_NE(client.get(), nullptr);
+    EXPECT_EQ(mClientManager->getNumOfClients(), 1);
 
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client1, kClientId, kClientPid, kClientUid, kClientOpPackageName);
-
-    status_t err = mClientManager.addClient(std::move(clientInfo));
-    EXPECT_TRUE(err == OK);
-
-    size_t numOfClients = mClientManager.getNumOfClients();
-    EXPECT_EQ(numOfClients, 1);
-
-    err = mClientManager.removeClient(kClientId);
-    EXPECT_TRUE(err == OK);
+    // Unregister client, should succeed.
+    Status status = client->unregister();
+    EXPECT_TRUE(status.isOk());
+    EXPECT_EQ(mClientManager->getNumOfClients(), 0);
 }
 
 TEST_F(TranscodingClientManagerTest, TestAddingDupliacteClient) {
-    std::shared_ptr<ITranscodingServiceClient> client1 =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
+    std::shared_ptr<ITranscodingClient> client;
+    status_t err = mClientManager->addClient(mClientCallback1, kClientPid, kClientUid, kClientName,
+                                             kClientPackage, &client);
+    EXPECT_EQ(err, OK);
+    EXPECT_NE(client.get(), nullptr);
+    EXPECT_EQ(mClientManager->getNumOfClients(), 1);
 
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client1, kClientId, kClientPid, kClientUid, kClientOpPackageName);
+    std::shared_ptr<ITranscodingClient> dupClient;
+    err = mClientManager->addClient(mClientCallback1, kClientPid, kClientUid, "dupClient",
+                                    "dupPackage", &dupClient);
+    EXPECT_EQ(err, ALREADY_EXISTS);
+    EXPECT_EQ(dupClient.get(), nullptr);
+    EXPECT_EQ(mClientManager->getNumOfClients(), 1);
 
-    status_t err = mClientManager.addClient(std::move(clientInfo));
-    EXPECT_TRUE(err == OK);
+    Status status = client->unregister();
+    EXPECT_TRUE(status.isOk());
+    EXPECT_EQ(mClientManager->getNumOfClients(), 0);
 
-    err = mClientManager.addClient(std::move(clientInfo));
-    EXPECT_TRUE(err != OK);
+    err = mClientManager->addClient(mClientCallback1, kClientPid, kClientUid, "dupClient",
+                                    "dupPackage", &dupClient);
+    EXPECT_EQ(err, OK);
+    EXPECT_NE(dupClient.get(), nullptr);
+    EXPECT_EQ(mClientManager->getNumOfClients(), 1);
 
-    err = mClientManager.removeClient(kClientId);
-    EXPECT_TRUE(err == OK);
+    status = dupClient->unregister();
+    EXPECT_TRUE(status.isOk());
+    EXPECT_EQ(mClientManager->getNumOfClients(), 0);
 }
 
 TEST_F(TranscodingClientManagerTest, TestAddingMultipleClient) {
-    std::shared_ptr<ITranscodingServiceClient> client1 =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo1 =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client1, kClientId, kClientPid, kClientUid, kClientOpPackageName);
-
-    status_t err = mClientManager.addClient(std::move(clientInfo1));
-    EXPECT_TRUE(err == OK);
-
-    std::shared_ptr<ITranscodingServiceClient> client2 =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo2 =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client2, kClientId + 1, kClientPid, kClientUid, kClientOpPackageName);
-
-    err = mClientManager.addClient(std::move(clientInfo2));
-    EXPECT_TRUE(err == OK);
-
-    std::shared_ptr<ITranscodingServiceClient> client3 =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-
-    // Create a client with invalid packagename.
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo3 =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client3, kClientId + 2, kClientPid, kClientUid, kClientOpPackageName);
-
-    err = mClientManager.addClient(std::move(clientInfo3));
-    EXPECT_TRUE(err == OK);
-
-    size_t numOfClients = mClientManager.getNumOfClients();
-    EXPECT_EQ(numOfClients, 3);
-
-    err = mClientManager.removeClient(kClientId);
-    EXPECT_TRUE(err == OK);
-
-    err = mClientManager.removeClient(kClientId + 1);
-    EXPECT_TRUE(err == OK);
-
-    err = mClientManager.removeClient(kClientId + 2);
-    EXPECT_TRUE(err == OK);
+    addMultipleClients();
+    unregisterMultipleClients();
 }
 
-TEST_F(TranscodingClientManagerTest, TestRemovingNonExistClient) {
-    status_t err = mClientManager.removeClient(kInvalidClientId);
-    EXPECT_TRUE(err != OK);
+TEST_F(TranscodingClientManagerTest, TestSubmitCancelGetJobs) {
+    addMultipleClients();
 
-    err = mClientManager.removeClient(1000 /* clientId */);
-    EXPECT_TRUE(err != OK);
+    // Test jobId assignment.
+    TranscodingRequestParcel request;
+    request.fileName = "test_file_0";
+    TranscodingJobParcel job;
+    bool result;
+    EXPECT_TRUE(mClient1->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 0);
+
+    request.fileName = "test_file_1";
+    EXPECT_TRUE(mClient1->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 1);
+
+    request.fileName = "test_file_2";
+    EXPECT_TRUE(mClient1->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 2);
+
+    // Test submit bad request (no valid fileName) fails.
+    TranscodingRequestParcel badRequest;
+    badRequest.fileName = "bad_file";
+    EXPECT_TRUE(mClient1->submitRequest(badRequest, &job, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test get jobs by id.
+    EXPECT_TRUE(mClient1->getJobWithId(2, &job, &result).isOk());
+    EXPECT_EQ(job.jobId, 2);
+    EXPECT_EQ(job.request.fileName, "test_file_2");
+    EXPECT_TRUE(result);
+
+    // Test get jobs by invalid id fails.
+    EXPECT_TRUE(mClient1->getJobWithId(100, &job, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test cancel non-existent job fail.
+    EXPECT_TRUE(mClient2->cancelJob(100, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test cancel valid jobId in arbitrary order.
+    EXPECT_TRUE(mClient1->cancelJob(2, &result).isOk());
+    EXPECT_TRUE(result);
+
+    EXPECT_TRUE(mClient1->cancelJob(0, &result).isOk());
+    EXPECT_TRUE(result);
+
+    EXPECT_TRUE(mClient1->cancelJob(1, &result).isOk());
+    EXPECT_TRUE(result);
+
+    // Test cancel job again fails.
+    EXPECT_TRUE(mClient1->cancelJob(1, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test get job after cancel fails.
+    EXPECT_TRUE(mClient1->getJobWithId(2, &job, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test jobId independence for each client.
+    EXPECT_TRUE(mClient2->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 0);
+
+    EXPECT_TRUE(mClient2->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 1);
+
+    unregisterMultipleClients();
 }
 
-TEST_F(TranscodingClientManagerTest, TestCheckClientWithClientId) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
+TEST_F(TranscodingClientManagerTest, TestClientCallback) {
+    addMultipleClients();
 
-    std::unique_ptr<TranscodingClientManager::ClientInfo> clientInfo =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    client, kClientId, kClientPid, kClientUid, kClientOpPackageName);
+    TranscodingRequestParcel request;
+    request.fileName = "test_file_name";
+    TranscodingJobParcel job;
+    bool result;
+    EXPECT_TRUE(mClient1->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 0);
 
-    status_t err = mClientManager.addClient(std::move(clientInfo));
-    EXPECT_TRUE(err == OK);
+    mScheduler->finishLastJob();
+    EXPECT_EQ(mClientCallback1->popEvent(), TestClientCallback::Finished(job.jobId));
 
-    bool res = mClientManager.isClientIdRegistered(kClientId);
-    EXPECT_TRUE(res);
+    EXPECT_TRUE(mClient1->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 1);
 
-    res = mClientManager.isClientIdRegistered(kInvalidClientId);
-    EXPECT_FALSE(res);
+    mScheduler->abortLastJob();
+    EXPECT_EQ(mClientCallback1->popEvent(), TestClientCallback::Failed(job.jobId));
+
+    EXPECT_TRUE(mClient1->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 2);
+
+    EXPECT_TRUE(mClient2->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 0);
+
+    mScheduler->finishLastJob();
+    EXPECT_EQ(mClientCallback2->popEvent(), TestClientCallback::Finished(job.jobId));
+
+    unregisterMultipleClients();
 }
 
-}  // namespace android
\ No newline at end of file
+}  // namespace android
diff --git a/media/libmediatranscoding/tests/TranscodingJobScheduler_tests.cpp b/media/libmediatranscoding/tests/TranscodingJobScheduler_tests.cpp
new file mode 100644
index 0000000..d062d93
--- /dev/null
+++ b/media/libmediatranscoding/tests/TranscodingJobScheduler_tests.cpp
@@ -0,0 +1,486 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// Unit Test for TranscodingJobScheduler
+
+// #define LOG_NDEBUG 0
+#define LOG_TAG "TranscodingJobSchedulerTest"
+
+#include <aidl/android/media/BnTranscodingClientCallback.h>
+#include <aidl/android/media/IMediaTranscodingService.h>
+#include <aidl/android/media/ITranscodingClient.h>
+#include <aidl/android/media/ITranscodingClientCallback.h>
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+#include <gtest/gtest.h>
+#include <media/TranscodingClientManager.h>
+#include <media/TranscodingJobScheduler.h>
+#include <utils/Log.h>
+
+namespace android {
+
+using Status = ::ndk::ScopedAStatus;
+using aidl::android::media::BnTranscodingClientCallback;
+using aidl::android::media::IMediaTranscodingService;
+using aidl::android::media::ITranscodingClient;
+
+constexpr int64_t kClientId = 1000;
+constexpr int32_t kClientJobId = 0;
+constexpr pid_t kClientPid = 5000;
+constexpr pid_t kInvalidPid = -1;
+
+#define CLIENT(n) (kClientId + (n))
+#define JOB(n) (kClientJobId + (n))
+#define PID(n) (kClientPid + (n))
+
+class TestCallback : public TranscoderInterface, public ProcessInfoInterface {
+public:
+    TestCallback() : mTopPid(-1), mLastError(TranscodingErrorCode::kUnknown) {}
+    virtual ~TestCallback() {}
+
+    // TranscoderInterface
+    void start(int64_t clientId, int32_t jobId) override {
+        mEventQueue.push_back(Start(clientId, jobId));
+    }
+    void pause(int64_t clientId, int32_t jobId) override {
+        mEventQueue.push_back(Pause(clientId, jobId));
+    }
+    void resume(int64_t clientId, int32_t jobId) override {
+        mEventQueue.push_back(Resume(clientId, jobId));
+    }
+
+    // ProcessInfoInterface
+    bool isProcessOnTop(pid_t pid) override { return pid == mTopPid; }
+
+    void onFinished(int64_t clientId, int32_t jobId) {
+        mEventQueue.push_back(Finished(clientId, jobId));
+    }
+
+    void onFailed(int64_t clientId, int32_t jobId, TranscodingErrorCode err) {
+        mLastError = err;
+        mEventQueue.push_back(Failed(clientId, jobId));
+    }
+
+    void setTop(pid_t pid) { mTopPid = pid; }
+
+    TranscodingErrorCode getLastError() {
+        TranscodingErrorCode result = mLastError;
+        mLastError = TranscodingErrorCode::kUnknown;
+        return result;
+    }
+
+    struct Event {
+        enum { NoEvent, Start, Pause, Resume, Finished, Failed } type;
+        int64_t clientId;
+        int32_t jobId;
+    };
+
+    static constexpr Event NoEvent = {Event::NoEvent, 0, 0};
+
+#define DECLARE_EVENT(action)                              \
+    static Event action(int64_t clientId, int32_t jobId) { \
+        return {Event::action, clientId, jobId};           \
+    }
+
+    DECLARE_EVENT(Start);
+    DECLARE_EVENT(Pause);
+    DECLARE_EVENT(Resume);
+    DECLARE_EVENT(Finished);
+    DECLARE_EVENT(Failed);
+
+    const Event& popEvent() {
+        if (mEventQueue.empty()) {
+            mPoppedEvent = NoEvent;
+        } else {
+            mPoppedEvent = *mEventQueue.begin();
+            mEventQueue.pop_front();
+        }
+        return mPoppedEvent;
+    }
+
+private:
+    Event mPoppedEvent;
+    std::list<Event> mEventQueue;
+    pid_t mTopPid;
+    TranscodingErrorCode mLastError;
+};
+
+bool operator==(const TestCallback::Event& lhs, const TestCallback::Event& rhs) {
+    return lhs.type == rhs.type && lhs.clientId == rhs.clientId && lhs.jobId == rhs.jobId;
+}
+
+struct TestClientCallback : public BnTranscodingClientCallback {
+    TestClientCallback(TestCallback* owner, int64_t clientId) : mOwner(owner), mClientId(clientId) {
+        ALOGD("TestClient Created");
+    }
+
+    Status onTranscodingFinished(int32_t in_jobId,
+                                 const TranscodingResultParcel& in_result) override {
+        EXPECT_EQ(in_jobId, in_result.jobId);
+        mOwner->onFinished(mClientId, in_jobId);
+        return Status::ok();
+    }
+
+    Status onTranscodingFailed(int32_t in_jobId, TranscodingErrorCode in_errorCode) override {
+        mOwner->onFailed(mClientId, in_jobId, in_errorCode);
+        return Status::ok();
+    }
+
+    Status onAwaitNumberOfJobsChanged(int32_t /* in_jobId */, int32_t /* in_oldAwaitNumber */,
+                                      int32_t /* in_newAwaitNumber */) override {
+        return Status::ok();
+    }
+
+    Status onProgressUpdate(int32_t /* in_jobId */, int32_t /* in_progress */) override {
+        return Status::ok();
+    }
+
+    virtual ~TestClientCallback() { ALOGI("TestClient destroyed"); };
+
+private:
+    TestCallback* mOwner;
+    int64_t mClientId;
+    TestClientCallback(const TestClientCallback&) = delete;
+    TestClientCallback& operator=(const TestClientCallback&) = delete;
+};
+
+class TranscodingJobSchedulerTest : public ::testing::Test {
+public:
+    TranscodingJobSchedulerTest() { ALOGI("TranscodingJobSchedulerTest created"); }
+
+    void SetUp() override {
+        ALOGI("TranscodingJobSchedulerTest set up");
+        mCallback.reset(new TestCallback());
+        mScheduler.reset(new TranscodingJobScheduler(mCallback, mCallback));
+
+        // Set priority only, ignore other fields for now.
+        mOfflineRequest.priority = TranscodingJobPriority::kUnspecified;
+        mRealtimeRequest.priority = TranscodingJobPriority::kHigh;
+        mClientCallback0 =
+                ::ndk::SharedRefBase::make<TestClientCallback>(mCallback.get(), CLIENT(0));
+        mClientCallback1 =
+                ::ndk::SharedRefBase::make<TestClientCallback>(mCallback.get(), CLIENT(1));
+        mClientCallback2 =
+                ::ndk::SharedRefBase::make<TestClientCallback>(mCallback.get(), CLIENT(2));
+        mClientCallback3 =
+                ::ndk::SharedRefBase::make<TestClientCallback>(mCallback.get(), CLIENT(3));
+    }
+
+    void TearDown() override { ALOGI("TranscodingJobSchedulerTest tear down"); }
+
+    ~TranscodingJobSchedulerTest() { ALOGD("TranscodingJobSchedulerTest destroyed"); }
+
+    std::shared_ptr<TestCallback> mCallback;
+    std::shared_ptr<TranscodingJobScheduler> mScheduler;
+    TranscodingRequestParcel mOfflineRequest;
+    TranscodingRequestParcel mRealtimeRequest;
+    std::shared_ptr<TestClientCallback> mClientCallback0;
+    std::shared_ptr<TestClientCallback> mClientCallback1;
+    std::shared_ptr<TestClientCallback> mClientCallback2;
+    std::shared_ptr<TestClientCallback> mClientCallback3;
+};
+
+TEST_F(TranscodingJobSchedulerTest, TestSubmitJob) {
+    ALOGD("TestSubmitJob");
+
+    // Start with PID(1) on top.
+    mCallback->setTop(PID(1));
+
+    // Submit offline job to CLIENT(0) in PID(0).
+    // Should start immediately (because this is the only job).
+    mScheduler->submit(CLIENT(0), JOB(0), PID(0), mOfflineRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), 0));
+
+    // Submit real-time job to CLIENT(0).
+    // Should pause offline job and start new job,  even if PID(0) is not on top.
+    mScheduler->submit(CLIENT(0), JOB(1), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(0), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(1)));
+
+    // Submit real-time job to CLIENT(0), should be queued after the previous job.
+    mScheduler->submit(CLIENT(0), JOB(2), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Submit real-time job to CLIENT(1) in same pid, should be queued after the previous job.
+    mScheduler->submit(CLIENT(1), JOB(0), PID(0), mRealtimeRequest, mClientCallback1);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Submit real-time job to CLIENT(2) in PID(1).
+    // Should pause previous job and start new job, because PID(1) is top.
+    mCallback->setTop(PID(1));
+    mScheduler->submit(CLIENT(2), JOB(0), PID(1), mRealtimeRequest, mClientCallback2);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(0), JOB(1)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(2), JOB(0)));
+
+    // Submit offline job, shouldn't generate any event.
+    mScheduler->submit(CLIENT(2), JOB(1), PID(1), mOfflineRequest, mClientCallback2);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    mCallback->setTop(PID(0));
+    // Submit real-time job to CLIENT(1) in PID(0).
+    // Should pause current job, and resume last job in PID(0).
+    mScheduler->submit(CLIENT(1), JOB(1), PID(0), mRealtimeRequest, mClientCallback1);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(2), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Resume(CLIENT(0), JOB(1)));
+}
+
+TEST_F(TranscodingJobSchedulerTest, TestCancelJob) {
+    ALOGD("TestCancelJob");
+
+    // Submit real-time job JOB(0), should start immediately.
+    mScheduler->submit(CLIENT(0), JOB(0), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(0)));
+
+    // Submit real-time job JOB(1), should not start.
+    mScheduler->submit(CLIENT(0), JOB(1), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Submit offline job JOB(2), should not start.
+    mScheduler->submit(CLIENT(0), JOB(2), PID(0), mOfflineRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Cancel queued real-time job.
+    // Cancel real-time job JOB(1), should be cancelled.
+    EXPECT_TRUE(mScheduler->cancel(CLIENT(0), JOB(1)));
+
+    // Cancel queued offline job.
+    // Cancel offline job JOB(2), should be cancelled.
+    EXPECT_TRUE(mScheduler->cancel(CLIENT(0), JOB(2)));
+
+    // Submit offline job JOB(3), shouldn't cause any event.
+    mScheduler->submit(CLIENT(0), JOB(3), PID(0), mOfflineRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Cancel running real-time job JOB(0).
+    // - Should be paused first then cancelled.
+    // - Should also start offline job JOB(2) because real-time queue is empty.
+    EXPECT_TRUE(mScheduler->cancel(CLIENT(0), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(0), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(3)));
+}
+
+TEST_F(TranscodingJobSchedulerTest, TestFinishJob) {
+    ALOGD("TestFinishJob");
+
+    // Fail without any jobs submitted, should be ignored.
+    mScheduler->onFinish(CLIENT(0), JOB(0));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Submit offline job JOB(0), should start immediately.
+    mScheduler->submit(CLIENT(0), JOB(0), PID(0), mOfflineRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(0)));
+
+    // Submit real-time job JOB(1), should pause offline job and start immediately.
+    mScheduler->submit(CLIENT(0), JOB(1), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(0), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(1)));
+
+    // Submit real-time job JOB(2), should not start.
+    mScheduler->submit(CLIENT(0), JOB(2), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Fail when the job never started, should be ignored.
+    mScheduler->onFinish(CLIENT(0), JOB(2));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // PID(1) moves to top.
+    mCallback->setTop(PID(1));
+    // Submit real-time job to CLIENT(1) in PID(1), should pause previous job and start new job.
+    mScheduler->submit(CLIENT(1), JOB(0), PID(1), mRealtimeRequest, mClientCallback1);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(0), JOB(1)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(1), JOB(0)));
+
+    // Simulate Fail that arrived late, after pause issued by scheduler.
+    // Should still be propagated to client, but shouldn't trigger any new start.
+    mScheduler->onFinish(CLIENT(0), JOB(1));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Finished(CLIENT(0), JOB(1)));
+
+    // Fail running real-time job, should start next real-time job in queue.
+    mScheduler->onFinish(CLIENT(1), JOB(0));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Finished(CLIENT(1), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(2)));
+
+    // Fail running real-time job, should resume next job (offline job) in queue.
+    mScheduler->onFinish(CLIENT(0), JOB(2));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Finished(CLIENT(0), JOB(2)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Resume(CLIENT(0), JOB(0)));
+
+    // Fail running offline job.
+    mScheduler->onFinish(CLIENT(0), JOB(0));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Finished(CLIENT(0), JOB(0)));
+
+    // Duplicate fail for last job, should be ignored.
+    mScheduler->onFinish(CLIENT(0), JOB(0));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+}
+
+TEST_F(TranscodingJobSchedulerTest, TestFailJob) {
+    ALOGD("TestFailJob");
+
+    // Fail without any jobs submitted, should be ignored.
+    mScheduler->onError(CLIENT(0), JOB(0), TranscodingErrorCode::kUnknown);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Submit offline job JOB(0), should start immediately.
+    mScheduler->submit(CLIENT(0), JOB(0), PID(0), mOfflineRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(0)));
+
+    // Submit real-time job JOB(1), should pause offline job and start immediately.
+    mScheduler->submit(CLIENT(0), JOB(1), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(0), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(1)));
+
+    // Submit real-time job JOB(2), should not start.
+    mScheduler->submit(CLIENT(0), JOB(2), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Fail when the job never started, should be ignored.
+    mScheduler->onError(CLIENT(0), JOB(2), TranscodingErrorCode::kUnknown);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // PID(1) moves to top.
+    mCallback->setTop(PID(1));
+    // Submit real-time job to CLIENT(1) in PID(1), should pause previous job and start new job.
+    mScheduler->submit(CLIENT(1), JOB(0), PID(1), mRealtimeRequest, mClientCallback1);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(0), JOB(1)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(1), JOB(0)));
+
+    // Simulate Fail that arrived late, after pause issued by scheduler.
+    // Should still be propagated to client, but shouldn't trigger any new start.
+    mScheduler->onError(CLIENT(0), JOB(1), TranscodingErrorCode::kUnknown);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Failed(CLIENT(0), JOB(1)));
+
+    // Fail running real-time job, should start next real-time job in queue.
+    mScheduler->onError(CLIENT(1), JOB(0), TranscodingErrorCode::kUnknown);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Failed(CLIENT(1), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(2)));
+
+    // Fail running real-time job, should resume next job (offline job) in queue.
+    mScheduler->onError(CLIENT(0), JOB(2), TranscodingErrorCode::kUnknown);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Failed(CLIENT(0), JOB(2)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Resume(CLIENT(0), JOB(0)));
+
+    // Fail running offline job, and test error code propagation.
+    mScheduler->onError(CLIENT(0), JOB(0), TranscodingErrorCode::kInvalidBitstream);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Failed(CLIENT(0), JOB(0)));
+    EXPECT_EQ(mCallback->getLastError(), TranscodingErrorCode::kInvalidBitstream);
+
+    // Duplicate fail for last job, should be ignored.
+    mScheduler->onError(CLIENT(0), JOB(0), TranscodingErrorCode::kUnknown);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+}
+
+TEST_F(TranscodingJobSchedulerTest, TestTopProcessChanged) {
+    ALOGD("TestTopProcessChanged");
+
+    // Submit real-time job to CLIENT(0), job should start immediately.
+    mScheduler->submit(CLIENT(0), JOB(0), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(0)));
+
+    // Submit offline job to CLIENT(0), should not start.
+    mScheduler->submit(CLIENT(1), JOB(0), PID(0), mOfflineRequest, mClientCallback1);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Move PID(1) to top.
+    mCallback->setTop(PID(1));
+    // Submit real-time job to CLIENT(2) in different pid PID(1).
+    // Should pause previous job and start new job.
+    mScheduler->submit(CLIENT(2), JOB(0), PID(1), mRealtimeRequest, mClientCallback2);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(0), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(2), JOB(0)));
+
+    // Bring PID(0) back to top.
+    mCallback->setTop(PID(0));
+    mScheduler->onTopProcessChanged(PID(0));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(2), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Resume(CLIENT(0), JOB(0)));
+
+    // Bring invalid process to top.
+    mScheduler->onTopProcessChanged(kInvalidPid);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Finish job, next real-time job should resume.
+    mScheduler->onFinish(CLIENT(0), JOB(0));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Finished(CLIENT(0), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Resume(CLIENT(2), JOB(0)));
+
+    // Finish job, offline job should start.
+    mScheduler->onFinish(CLIENT(2), JOB(0));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Finished(CLIENT(2), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(1), JOB(0)));
+}
+
+TEST_F(TranscodingJobSchedulerTest, TestResourceLost) {
+    ALOGD("TestResourceLost");
+
+    // Submit real-time job to CLIENT(0), job should start immediately.
+    mScheduler->submit(CLIENT(0), JOB(0), PID(0), mRealtimeRequest, mClientCallback0);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(0), JOB(0)));
+
+    // Submit offline job to CLIENT(0), should not start.
+    mScheduler->submit(CLIENT(1), JOB(0), PID(0), mOfflineRequest, mClientCallback1);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Move PID(1) to top.
+    mCallback->setTop(PID(1));
+
+    // Submit real-time job to CLIENT(2) in different pid PID(1).
+    // Should pause previous job and start new job.
+    mScheduler->submit(CLIENT(2), JOB(0), PID(1), mRealtimeRequest, mClientCallback2);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Pause(CLIENT(0), JOB(0)));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(2), JOB(0)));
+
+    // Test 1: No queue change during resource loss.
+    // Signal resource lost.
+    mScheduler->onResourceLost();
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Signal resource available, CLIENT(2) should resume.
+    mScheduler->onResourceAvailable();
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Resume(CLIENT(2), JOB(0)));
+
+    // Test 2: Change of queue order during resource loss.
+    // Signal resource lost.
+    mScheduler->onResourceLost();
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Move PID(0) back to top, should have no resume due to no resource.
+    mScheduler->onTopProcessChanged(PID(0));
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Signal resource available, CLIENT(0) should resume.
+    mScheduler->onResourceAvailable();
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Resume(CLIENT(0), JOB(0)));
+
+    // Test 3: Adding new queue during resource loss.
+    // Signal resource lost.
+    mScheduler->onResourceLost();
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Move PID(2) to top.
+    mCallback->setTop(PID(2));
+
+    // Submit real-time job to CLIENT(3) in PID(2), job shouldn't start due to no resource.
+    mScheduler->submit(CLIENT(3), JOB(0), PID(2), mRealtimeRequest, mClientCallback3);
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::NoEvent);
+
+    // Signal resource available, CLIENT(3)'s job should start.
+    mScheduler->onResourceAvailable();
+    EXPECT_EQ(mCallback->popEvent(), TestCallback::Start(CLIENT(3), JOB(0)));
+}
+
+}  // namespace android
diff --git a/media/libmediatranscoding/tests/build_and_run_all_unit_tests.sh b/media/libmediatranscoding/tests/build_and_run_all_unit_tests.sh
index d8e4830..ff6df2c 100644
--- a/media/libmediatranscoding/tests/build_and_run_all_unit_tests.sh
+++ b/media/libmediatranscoding/tests/build_and_run_all_unit_tests.sh
@@ -3,24 +3,32 @@
 # Run tests in this directory.
 #
 
-if [ -z "$ANDROID_BUILD_TOP" ]; then
-    echo "Android build environment not set"
-    exit -1
+if [ "$SYNC_FINISHED" != true ]; then
+  if [ -z "$ANDROID_BUILD_TOP" ]; then
+      echo "Android build environment not set"
+      exit -1
+  fi
+
+  # ensure we have mm
+  . $ANDROID_BUILD_TOP/build/envsetup.sh
+
+  mm
+
+  echo "waiting for device"
+
+  adb root && adb wait-for-device remount && adb sync
 fi
 
-# ensure we have mm
-. $ANDROID_BUILD_TOP/build/envsetup.sh
-
-mm
-
-echo "waiting for device"
-
-adb root && adb wait-for-device remount && adb sync
-
 echo "========================================"
 
 echo "testing TranscodingClientManager"
-adb shell /data/nativetest64/TranscodingClientManager_tests/TranscodingClientManager_tests
+#adb shell /data/nativetest64/TranscodingClientManager_tests/TranscodingClientManager_tests
+adb shell /data/nativetest/TranscodingClientManager_tests/TranscodingClientManager_tests
 
 echo "testing AdjustableMaxPriorityQueue"
-adb shell /data/nativetest64/AdjustableMaxPriorityQueue_tests/AdjustableMaxPriorityQueue_tests
+#adb shell /data/nativetest64/AdjustableMaxPriorityQueue_tests/AdjustableMaxPriorityQueue_tests
+adb shell /data/nativetest/AdjustableMaxPriorityQueue_tests/AdjustableMaxPriorityQueue_tests
+
+echo "testing TranscodingJobScheduler"
+#adb shell /data/nativetest64/TranscodingJobScheduler_tests/TranscodingJobScheduler_tests
+adb shell /data/nativetest/TranscodingJobScheduler_tests/TranscodingJobScheduler_tests
diff --git a/media/libmediatranscoding/transcoder/Android.bp b/media/libmediatranscoding/transcoder/Android.bp
new file mode 100644
index 0000000..a8caebe
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/Android.bp
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+cc_library_shared {
+    name: "libmediatranscoder",
+
+    srcs: [
+        "MediaSampleReaderNDK.cpp",
+    ],
+
+    shared_libs: [
+        "libbase",
+        "libcutils",
+        "libmediandk",
+        "libutils",
+    ],
+
+    export_include_dirs: [
+        "include",
+    ],
+
+    cflags: [
+        "-Werror",
+        "-Wno-error=deprecated-declarations",
+        "-Wall",
+    ],
+
+    sanitize: {
+        misc_undefined: [
+            "unsigned-integer-overflow",
+            "signed-integer-overflow",
+        ],
+        cfi: true,
+    },
+}
diff --git a/media/libmediatranscoding/transcoder/MediaSampleReaderNDK.cpp b/media/libmediatranscoding/transcoder/MediaSampleReaderNDK.cpp
new file mode 100644
index 0000000..d0f117d
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/MediaSampleReaderNDK.cpp
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// #define LOG_NDEBUG 0
+#define LOG_TAG "MediaSampleReader"
+
+#include <android-base/logging.h>
+#include <media/MediaSampleReaderNDK.h>
+
+#include <algorithm>
+#include <vector>
+
+namespace android {
+
+// static
+std::shared_ptr<MediaSampleReader> MediaSampleReaderNDK::createFromFd(int fd, size_t offset,
+                                                                      size_t size) {
+    AMediaExtractor* extractor = AMediaExtractor_new();
+    if (extractor == nullptr) {
+        LOG(ERROR) << "Unable to allocate AMediaExtractor";
+        return nullptr;
+    }
+
+    media_status_t status = AMediaExtractor_setDataSourceFd(extractor, fd, offset, size);
+    if (status != AMEDIA_OK) {
+        LOG(ERROR) << "AMediaExtractor_setDataSourceFd returned error: " << status;
+        AMediaExtractor_delete(extractor);
+        return nullptr;
+    }
+
+    auto sampleReader = std::shared_ptr<MediaSampleReaderNDK>(new MediaSampleReaderNDK(extractor));
+    status = sampleReader->init();
+    if (status != AMEDIA_OK) {
+        LOG(ERROR) << "MediaSampleReaderNDK::init returned error: " << status;
+        return nullptr;
+    }
+
+    return sampleReader;
+}
+
+MediaSampleReaderNDK::MediaSampleReaderNDK(AMediaExtractor* extractor)
+      : mExtractor(extractor), mTrackCount(AMediaExtractor_getTrackCount(mExtractor)) {
+    if (mTrackCount > 0) {
+        mTrackCursors.resize(mTrackCount);
+        mTrackCursors.resize(mTrackCount);
+    }
+}
+
+media_status_t MediaSampleReaderNDK::init() {
+    for (size_t trackIndex = 0; trackIndex < mTrackCount; trackIndex++) {
+        media_status_t status = AMediaExtractor_selectTrack(mExtractor, trackIndex);
+        if (status != AMEDIA_OK) {
+            LOG(ERROR) << "AMediaExtractor_selectTrack returned error: " << status;
+            return status;
+        }
+    }
+
+    mExtractorTrackIndex = AMediaExtractor_getSampleTrackIndex(mExtractor);
+    if (mExtractorTrackIndex >= 0) {
+        mTrackCursors[mExtractorTrackIndex].current.set(mExtractorSampleIndex,
+                                                        AMediaExtractor_getSampleTime(mExtractor));
+    } else if (mTrackCount > 0) {
+        // The extractor track index is only allowed to be invalid if there are no tracks.
+        LOG(ERROR) << "Track index " << mExtractorTrackIndex << " is invalid for track count "
+                   << mTrackCount;
+        return AMEDIA_ERROR_MALFORMED;
+    }
+
+    return AMEDIA_OK;
+}
+
+MediaSampleReaderNDK::~MediaSampleReaderNDK() {
+    if (mExtractor != nullptr) {
+        AMediaExtractor_delete(mExtractor);
+    }
+}
+
+bool MediaSampleReaderNDK::advanceExtractor_l() {
+    // Reset the "next" sample time whenever the extractor advances past a sample that is current,
+    // to ensure that "next" is appropriately updated when the extractor advances over the next
+    // sample of that track.
+    if (mTrackCursors[mExtractorTrackIndex].current.isSet &&
+        mTrackCursors[mExtractorTrackIndex].current.index == mExtractorSampleIndex) {
+        mTrackCursors[mExtractorTrackIndex].next.reset();
+    }
+
+    if (!AMediaExtractor_advance(mExtractor)) {
+        return false;
+    }
+
+    mExtractorTrackIndex = AMediaExtractor_getSampleTrackIndex(mExtractor);
+    mExtractorSampleIndex++;
+
+    SampleCursor& cursor = mTrackCursors[mExtractorTrackIndex];
+    if (mExtractorSampleIndex > cursor.previous.index) {
+        if (!cursor.current.isSet) {
+            cursor.current.set(mExtractorSampleIndex, AMediaExtractor_getSampleTime(mExtractor));
+        } else if (!cursor.next.isSet && mExtractorSampleIndex > cursor.current.index) {
+            cursor.next.set(mExtractorSampleIndex, AMediaExtractor_getSampleTime(mExtractor));
+        }
+    }
+    return true;
+}
+
+media_status_t MediaSampleReaderNDK::seekExtractorBackwards_l(int64_t targetTimeUs,
+                                                              int targetTrackIndex,
+                                                              uint64_t targetSampleIndex) {
+    if (targetSampleIndex > mExtractorSampleIndex) {
+        LOG(ERROR) << "Error: Forward seek is not supported";
+        return AMEDIA_ERROR_UNSUPPORTED;
+    }
+
+    // AMediaExtractor supports reading negative timestamps but does not support seeking to them.
+    const int64_t seekToTimeUs = std::max(targetTimeUs, (int64_t)0);
+    media_status_t status =
+            AMediaExtractor_seekTo(mExtractor, seekToTimeUs, AMEDIAEXTRACTOR_SEEK_PREVIOUS_SYNC);
+    if (status != AMEDIA_OK) {
+        LOG(ERROR) << "Unable to seek to " << seekToTimeUs << ", target " << targetTimeUs;
+        return status;
+    }
+    mExtractorTrackIndex = AMediaExtractor_getSampleTrackIndex(mExtractor);
+    int64_t sampleTimeUs = AMediaExtractor_getSampleTime(mExtractor);
+
+    while (sampleTimeUs != targetTimeUs || mExtractorTrackIndex != targetTrackIndex) {
+        if (!AMediaExtractor_advance(mExtractor)) {
+            return AMEDIA_ERROR_END_OF_STREAM;
+        }
+        mExtractorTrackIndex = AMediaExtractor_getSampleTrackIndex(mExtractor);
+        sampleTimeUs = AMediaExtractor_getSampleTime(mExtractor);
+    }
+    mExtractorSampleIndex = targetSampleIndex;
+    return AMEDIA_OK;
+}
+
+void MediaSampleReaderNDK::advanceTrack(int trackIndex) {
+    std::scoped_lock lock(mExtractorMutex);
+
+    if (trackIndex < 0 || trackIndex >= mTrackCount) {
+        LOG(ERROR) << "Invalid trackIndex " << trackIndex << " for trackCount " << mTrackCount;
+        return;
+    }
+
+    // Note: Positioning the extractor before advancing the track is needed for two reasons:
+    // 1. To enable multiple advances without explicitly letting the extractor catch up.
+    // 2. To prevent the extractor from being farther than "next".
+    (void)positionExtractorForTrack_l(trackIndex);
+
+    SampleCursor& cursor = mTrackCursors[trackIndex];
+    cursor.previous = cursor.current;
+    cursor.current = cursor.next;
+    cursor.next.reset();
+}
+
+media_status_t MediaSampleReaderNDK::positionExtractorForTrack_l(int trackIndex) {
+    media_status_t status = AMEDIA_OK;
+    const SampleCursor& cursor = mTrackCursors[trackIndex];
+
+    // Seek backwards if the extractor is ahead of the current time.
+    if (cursor.current.isSet && mExtractorSampleIndex > cursor.current.index) {
+        status = seekExtractorBackwards_l(cursor.current.timeStampUs, trackIndex,
+                                          cursor.current.index);
+        if (status != AMEDIA_OK) return status;
+    }
+
+    // Advance until extractor points to the current sample.
+    while (!(cursor.current.isSet && cursor.current.index == mExtractorSampleIndex)) {
+        if (!advanceExtractor_l()) {
+            return AMEDIA_ERROR_END_OF_STREAM;
+        }
+    }
+
+    return AMEDIA_OK;
+}
+
+media_status_t MediaSampleReaderNDK::getSampleInfoForTrack(int trackIndex, MediaSampleInfo* info) {
+    std::scoped_lock lock(mExtractorMutex);
+
+    if (trackIndex < 0 || trackIndex >= mTrackCount) {
+        LOG(ERROR) << "Invalid trackIndex " << trackIndex << " for trackCount " << mTrackCount;
+        return AMEDIA_ERROR_INVALID_PARAMETER;
+    } else if (info == nullptr) {
+        LOG(ERROR) << "MediaSampleInfo pointer is NULL.";
+        return AMEDIA_ERROR_INVALID_PARAMETER;
+    }
+
+    media_status_t status = positionExtractorForTrack_l(trackIndex);
+    if (status == AMEDIA_OK) {
+        info->presentationTimeUs = AMediaExtractor_getSampleTime(mExtractor);
+        info->flags = AMediaExtractor_getSampleFlags(mExtractor);
+        info->size = AMediaExtractor_getSampleSize(mExtractor);
+    } else if (status == AMEDIA_ERROR_END_OF_STREAM) {
+        info->presentationTimeUs = 0;
+        info->flags = SAMPLE_FLAG_END_OF_STREAM;
+        info->size = 0;
+    }
+
+    return status;
+}
+
+media_status_t MediaSampleReaderNDK::readSampleDataForTrack(int trackIndex, uint8_t* buffer,
+                                                            size_t bufferSize) {
+    std::scoped_lock lock(mExtractorMutex);
+
+    if (trackIndex < 0 || trackIndex >= mTrackCount) {
+        LOG(ERROR) << "Invalid trackIndex " << trackIndex << " for trackCount " << mTrackCount;
+        return AMEDIA_ERROR_INVALID_PARAMETER;
+    } else if (buffer == nullptr) {
+        LOG(ERROR) << "buffer pointer is NULL";
+        return AMEDIA_ERROR_INVALID_PARAMETER;
+    }
+
+    media_status_t status = positionExtractorForTrack_l(trackIndex);
+    if (status != AMEDIA_OK) return status;
+
+    ssize_t sampleSize = AMediaExtractor_getSampleSize(mExtractor);
+    if (bufferSize < sampleSize) {
+        LOG(ERROR) << "Buffer is too small for sample, " << bufferSize << " vs " << sampleSize;
+        return AMEDIA_ERROR_INVALID_PARAMETER;
+    }
+
+    ssize_t bytesRead = AMediaExtractor_readSampleData(mExtractor, buffer, bufferSize);
+    if (bytesRead < sampleSize) {
+        LOG(ERROR) << "Unable to read full sample, " << bytesRead << " vs " << sampleSize;
+        return AMEDIA_ERROR_INVALID_PARAMETER;
+    }
+
+    return AMEDIA_OK;
+}
+
+AMediaFormat* MediaSampleReaderNDK::getFileFormat() {
+    return AMediaExtractor_getFileFormat(mExtractor);
+}
+
+size_t MediaSampleReaderNDK::getTrackCount() const {
+    return mTrackCount;
+}
+
+AMediaFormat* MediaSampleReaderNDK::getTrackFormat(int trackIndex) {
+    if (trackIndex < 0 || trackIndex >= mTrackCount) {
+        LOG(ERROR) << "Invalid trackIndex " << trackIndex << " for trackCount " << mTrackCount;
+        return AMediaFormat_new();
+    }
+
+    return AMediaExtractor_getTrackFormat(mExtractor, trackIndex);
+}
+
+}  // namespace android
diff --git a/media/libmediatranscoding/transcoder/include/media/MediaSample.h b/media/libmediatranscoding/transcoder/include/media/MediaSample.h
new file mode 100644
index 0000000..2b9be9f
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/include/media/MediaSample.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_MEDIA_SAMPLE_H
+#define ANDROID_MEDIA_SAMPLE_H
+
+#include <cstdint>
+
+namespace android {
+
+/**
+ * Media sample flags.
+ * These flags purposely match the media NDK's buffer and extractor flags with one exception. The
+ * NDK extractor's flag for encrypted samples (AMEDIAEXTRACTOR_SAMPLE_FLAG_ENCRYPTED) is equal to 2,
+ * i.e. the same as SAMPLE_FLAG_CODEC_CONFIG below and NDK's AMEDIACODEC_BUFFER_FLAG_CODEC_CONFIG.
+ * Sample producers based on the NDK's extractor is responsible for catching those values.
+ * Note that currently the media transcoder does not support encrypted samples.
+ */
+enum : uint32_t {
+    SAMPLE_FLAG_SYNC_SAMPLE = 1,
+    SAMPLE_FLAG_CODEC_CONFIG = 2,
+    SAMPLE_FLAG_END_OF_STREAM = 4,
+    SAMPLE_FLAG_PARTIAL_FRAME = 8,
+};
+
+// Check that the sample flags have the expected NDK meaning.
+namespace {
+#include <media/NdkMediaCodec.h>
+#include <media/NdkMediaExtractor.h>
+
+static_assert(SAMPLE_FLAG_SYNC_SAMPLE == AMEDIAEXTRACTOR_SAMPLE_FLAG_SYNC,
+              "Sample flag mismatch: SYNC_SAMPLE");
+static_assert(SAMPLE_FLAG_CODEC_CONFIG == AMEDIACODEC_BUFFER_FLAG_CODEC_CONFIG,
+              "Sample flag mismatch: CODEC_CONFIG");
+static_assert(SAMPLE_FLAG_END_OF_STREAM == AMEDIACODEC_BUFFER_FLAG_END_OF_STREAM,
+              "Sample flag mismatch: END_OF_STREAM");
+static_assert(SAMPLE_FLAG_PARTIAL_FRAME == AMEDIACODEC_BUFFER_FLAG_PARTIAL_FRAME,
+              "Sample flag mismatch: PARTIAL_FRAME");
+}  // anonymous namespace
+
+/**
+ * MediaSampleInfo is an object that carries information about a compressed media sample without
+ * holding any sample data.
+ */
+struct MediaSampleInfo {
+    /** The sample's presentation timestamp in microseconds. */
+    int64_t presentationTimeUs = 0;
+
+    /** The size of the compressed sample data in bytes. */
+    size_t size = 0;
+
+    /** Sample flags. */
+    uint32_t flags = 0;
+};
+
+/**
+ * MediaSample holds a compressed media sample in memory.
+ */
+struct MediaSample {
+    /**
+     * Byte buffer containing the sample's compressed data.
+     * The memory backing this buffer is not managed by the MediaSample object so a separate
+     * mechanism to release a buffer is needed between a producer and a consumer.
+     */
+    const uint8_t* buffer = nullptr;
+
+    /** Offset, in bytes, to the sample's compressed data inside the buffer. */
+    size_t dataOffset = 0;
+
+    /**
+     * Buffer identifier. This identifier is likely only meaningful to the sample data producer and
+     * can be used for reclaiming the buffer once a consumer is done processing it.
+     */
+    uint32_t bufferId = 0xBAADF00D;
+
+    /** Media sample information. */
+    MediaSampleInfo info;
+};
+
+}  // namespace android
+#endif  // ANDROID_MEDIA_SAMPLE_H
diff --git a/media/libmediatranscoding/transcoder/include/media/MediaSampleReader.h b/media/libmediatranscoding/transcoder/include/media/MediaSampleReader.h
new file mode 100644
index 0000000..acebac2
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/include/media/MediaSampleReader.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_MEDIA_SAMPLE_READER_H
+#define ANDROID_MEDIA_SAMPLE_READER_H
+
+#include <media/MediaSample.h>
+#include <media/NdkMediaError.h>
+#include <media/NdkMediaFormat.h>
+
+namespace android {
+
+/**
+ * MediaSampleReader is an interface for reading media samples from a container.
+ * MediaSampleReader allows for reading samples from multiple tracks independently of each other
+ * while preserving the order of samples within each individual track.
+ * MediaSampleReader implementations are thread safe and can be used by multiple threads
+ * concurrently. But note that MediaSampleReader only maintains one state per track so concurrent
+ * usage of the same track from multiple threads has no benefit.
+ */
+class MediaSampleReader {
+public:
+    /**
+     * Returns the file format of the media container as a AMediaFormat.
+     * The caller is responsible for releasing the format when finished with it using
+     * AMediaFormat_delete().
+     * @return The file media format.
+     */
+    virtual AMediaFormat* getFileFormat() = 0;
+
+    /**
+     * Returns the number of tracks in the media container.
+     * @return The number of tracks.
+     */
+    virtual size_t getTrackCount() const = 0;
+
+    /**
+     * Returns the media format of a specific track as a AMediaFormat.
+     * The caller is responsible for releasing the format when finished with it using
+     * AMediaFormat_delete().
+     * @param trackIndex The track index (zero-based).
+     * @return The track media format.
+     */
+    virtual AMediaFormat* getTrackFormat(int trackIndex) = 0;
+
+    /**
+     * Returns the sample information for the current sample in the specified track.
+     * @param trackIndex The track index (zero-based).
+     * @param info Pointer to a MediaSampleInfo object where the sample information is written.
+     * @return AMEDIA_OK on success, AMEDIA_ERROR_END_OF_STREAM if there are no more samples to read
+     * from the track and AMEDIA_ERROR_INVALID_PARAMETER if trackIndex is out of bounds or the
+     * info pointer is NULL. Other AMEDIA_ERROR_* return values may not be recoverable.
+     */
+    virtual media_status_t getSampleInfoForTrack(int trackIndex, MediaSampleInfo* info) = 0;
+
+    /**
+     * Reads the current sample's data into the supplied buffer.
+     * @param trackIndex The track index (zero-based).
+     * @param buffer The buffer to write the sample's data to.
+     * @param bufferSize The size of the supplied buffer.
+     * @return AMEDIA_OK on success, AMEDIA_ERROR_END_OF_STREAM if there are no more samples to read
+     * from the track and AMEDIA_ERROR_INVALID_PARAMETER if trackIndex is out of bounds, if the
+     * buffer pointer is NULL or if bufferSize is too small for the sample. Other AMEDIA_ERROR_*
+     * return values may not be recoverable.
+     */
+    virtual media_status_t readSampleDataForTrack(int trackIndex, uint8_t* buffer,
+                                                  size_t bufferSize) = 0;
+
+    /**
+     * Advance the specified track to the next sample.
+     * @param trackIndex The track index (zero-based).
+     */
+    virtual void advanceTrack(int trackIndex) = 0;
+
+    /** Destructor. */
+    virtual ~MediaSampleReader() = default;
+
+    /** Constructor. */
+    MediaSampleReader() = default;
+
+private:
+    MediaSampleReader(const MediaSampleReader&) = delete;
+    MediaSampleReader& operator=(const MediaSampleReader&) = delete;
+};
+
+}  // namespace android
+#endif  // ANDROID_MEDIA_SAMPLE_READER_H
diff --git a/media/libmediatranscoding/transcoder/include/media/MediaSampleReaderNDK.h b/media/libmediatranscoding/transcoder/include/media/MediaSampleReaderNDK.h
new file mode 100644
index 0000000..668be9b
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/include/media/MediaSampleReaderNDK.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_MEDIA_SAMPLE_READER_NDK_H
+#define ANDROID_MEDIA_SAMPLE_READER_NDK_H
+
+#include <media/MediaSampleReader.h>
+#include <media/NdkMediaExtractor.h>
+
+#include <mutex>
+#include <vector>
+
+namespace android {
+
+/**
+ * MediaSampleReaderNDK is a concrete implementation of the MediaSampleReader interface based on the
+ * media NDK extractor.
+ */
+class MediaSampleReaderNDK : public MediaSampleReader {
+public:
+    /**
+     * Creates a new MediaSampleReaderNDK instance wrapped in a shared pointer.
+     * @param fd Source file descriptor. The caller is responsible for closing the fd and it is safe
+     *           to do so when this method returns.
+     * @param offset Source data offset.
+     * @param size Source data size.
+     * @return A shared pointer referencing the new MediaSampleReaderNDK instance on success, or an
+     *         empty shared pointer if an error occurred.
+     */
+    static std::shared_ptr<MediaSampleReader> createFromFd(int fd, size_t offset, size_t size);
+
+    AMediaFormat* getFileFormat() override;
+    size_t getTrackCount() const override;
+    AMediaFormat* getTrackFormat(int trackIndex) override;
+    media_status_t getSampleInfoForTrack(int trackIndex, MediaSampleInfo* info) override;
+    media_status_t readSampleDataForTrack(int trackIndex, uint8_t* buffer,
+                                          size_t bufferSize) override;
+    void advanceTrack(int trackIndex) override;
+
+    virtual ~MediaSampleReaderNDK() override;
+
+private:
+    /**
+     * Creates a new MediaSampleReaderNDK object from an AMediaExtractor. The extractor needs to be
+     * initialized with a valid data source before attempting to create a MediaSampleReaderNDK.
+     * @param extractor The initialized media extractor.
+     */
+    MediaSampleReaderNDK(AMediaExtractor* extractor);
+    media_status_t init();
+
+    AMediaExtractor* mExtractor = nullptr;
+    std::mutex mExtractorMutex;
+    const size_t mTrackCount;
+
+    int mExtractorTrackIndex = -1;
+    uint64_t mExtractorSampleIndex = 0;
+
+    /**
+     * SamplePosition describes the position of a single sample in the media file using its
+     * timestamp and index in the file.
+     */
+    struct SamplePosition {
+        uint64_t index = 0;
+        int64_t timeStampUs = 0;
+        bool isSet = false;
+
+        void set(uint64_t sampleIndex, int64_t sampleTimeUs) {
+            index = sampleIndex;
+            timeStampUs = sampleTimeUs;
+            isSet = true;
+        }
+
+        void reset() { isSet = false; }
+    };
+
+    /**
+     * SampleCursor keeps track of the sample position for a specific track. When the track is
+     * advanced, previous is set to current, current to next and next is reset. As the extractor
+     * advances over the combined timeline of tracks, it updates current and next for the track it
+     * points to if they are not already set.
+     */
+    struct SampleCursor {
+        SamplePosition previous;
+        SamplePosition current;
+        SamplePosition next;
+    };
+
+    /** Samples cursor for each track in the file. */
+    std::vector<SampleCursor> mTrackCursors;
+
+    bool advanceExtractor_l();
+    media_status_t positionExtractorForTrack_l(int trackIndex);
+    media_status_t seekExtractorBackwards_l(int64_t targetTimeUs, int targetTrackIndex,
+                                            uint64_t targetSampleIndex);
+};
+
+}  // namespace android
+#endif  // ANDROID_MEDIA_SAMPLE_READER_NDK_H
diff --git a/media/libmediatranscoding/transcoder/tests/Android.bp b/media/libmediatranscoding/transcoder/tests/Android.bp
new file mode 100644
index 0000000..99b3245
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/tests/Android.bp
@@ -0,0 +1,39 @@
+// Unit tests for libmediatranscoder.
+
+filegroup {
+    name: "test_assets",
+    srcs: ["assets/*"],
+}
+
+cc_defaults {
+    name: "testdefaults",
+
+    header_libs: [
+        "libbase_headers",
+        "libmedia_headers",
+    ],
+
+    shared_libs: [
+        "libbase",
+        "libcutils",
+        "libmediandk",
+        "libmediatranscoder",
+        "libutils",
+    ],
+
+    cflags: [
+        "-Werror",
+        "-Wall",
+    ],
+
+    data: [":test_assets"],
+    test_config_template: "AndroidTestTemplate.xml",
+    test_suites: ["device-tests", "TranscoderTests"],
+}
+
+// MediaSampleReaderNDK unit test
+cc_test {
+    name: "MediaSampleReaderNDKTests",
+    defaults: ["testdefaults"],
+    srcs: ["MediaSampleReaderNDKTests.cpp"],
+}
diff --git a/media/libmediatranscoding/transcoder/tests/AndroidTestTemplate.xml b/media/libmediatranscoding/transcoder/tests/AndroidTestTemplate.xml
new file mode 100644
index 0000000..23d1bab
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/tests/AndroidTestTemplate.xml
@@ -0,0 +1,29 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2020 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<configuration description="Unit test configuration for {MODULE}">
+    <option name="test-suite-tag" value="TranscoderTests" />
+    <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+        <option name="cleanup" value="false" />
+        <option name="push-file"
+            key="assets"
+            value="/data/local/tmp/TranscoderTestAssets" />
+    </target_preparer>
+
+    <test class="com.android.tradefed.testtype.GTest" >
+        <option name="module-name" value="{MODULE}" />
+    </test>
+</configuration>
+
diff --git a/media/libmediatranscoding/transcoder/tests/MediaSampleReaderNDKTests.cpp b/media/libmediatranscoding/transcoder/tests/MediaSampleReaderNDKTests.cpp
new file mode 100644
index 0000000..858fcb3
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/tests/MediaSampleReaderNDKTests.cpp
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2020 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+// Unit Test for MediaSampleReaderNDK
+
+// #define LOG_NDEBUG 0
+#define LOG_TAG "MediaSampleReaderNDKTests"
+
+#include <android-base/logging.h>
+#include <android/binder_manager.h>
+#include <android/binder_process.h>
+#include <fcntl.h>
+#include <gtest/gtest.h>
+#include <media/MediaSampleReaderNDK.h>
+#include <utils/Timers.h>
+
+// TODO(b/153453392): Test more asset types and validate sample data from readSampleDataForTrack.
+
+namespace android {
+
+#define SEC_TO_USEC(s) ((s)*1000 * 1000)
+
+class MediaSampleReaderNDKTests : public ::testing::Test {
+public:
+    MediaSampleReaderNDKTests() { LOG(DEBUG) << "MediaSampleReaderNDKTests created"; }
+
+    void SetUp() override {
+        LOG(DEBUG) << "MediaSampleReaderNDKTests set up";
+        const char* sourcePath =
+                "/data/local/tmp/TranscoderTestAssets/cubicle_avc_480x240_aac_24KHz.mp4";
+
+        mExtractor = AMediaExtractor_new();
+        ASSERT_NE(mExtractor, nullptr);
+
+        mSourceFd = open(sourcePath, O_RDONLY);
+        ASSERT_GT(mSourceFd, 0);
+
+        mFileSize = lseek(mSourceFd, 0, SEEK_END);
+        lseek(mSourceFd, 0, SEEK_SET);
+
+        media_status_t status =
+                AMediaExtractor_setDataSourceFd(mExtractor, mSourceFd, 0, mFileSize);
+        ASSERT_EQ(status, AMEDIA_OK);
+
+        mTrackCount = AMediaExtractor_getTrackCount(mExtractor);
+        for (size_t trackIndex = 0; trackIndex < mTrackCount; trackIndex++) {
+            AMediaExtractor_selectTrack(mExtractor, trackIndex);
+        }
+    }
+
+    void initExtractorTimestamps() {
+        // Save all sample timestamps, per track, as reported by the extractor.
+        mExtractorTimestamps.resize(mTrackCount);
+        do {
+            const int trackIndex = AMediaExtractor_getSampleTrackIndex(mExtractor);
+            const int64_t sampleTime = AMediaExtractor_getSampleTime(mExtractor);
+
+            mExtractorTimestamps[trackIndex].push_back(sampleTime);
+        } while (AMediaExtractor_advance(mExtractor));
+    }
+
+    void TearDown() override {
+        LOG(DEBUG) << "MediaSampleReaderNDKTests tear down";
+        AMediaExtractor_delete(mExtractor);
+        close(mSourceFd);
+    }
+
+    ~MediaSampleReaderNDKTests() { LOG(DEBUG) << "MediaSampleReaderNDKTests destroyed"; }
+
+    AMediaExtractor* mExtractor = nullptr;
+    size_t mTrackCount;
+    int mSourceFd;
+    size_t mFileSize;
+    std::vector<std::vector<int64_t>> mExtractorTimestamps;
+};
+
+TEST_F(MediaSampleReaderNDKTests, TestSampleTimes) {
+    LOG(DEBUG) << "TestSampleTimes Starts";
+
+    std::shared_ptr<MediaSampleReader> sampleReader =
+            MediaSampleReaderNDK::createFromFd(mSourceFd, 0, mFileSize);
+    ASSERT_TRUE(sampleReader);
+
+    MediaSampleInfo info;
+    int trackEosCount = 0;
+    std::vector<bool> trackReachedEos(mTrackCount, false);
+    std::vector<std::vector<int64_t>> readerTimestamps(mTrackCount);
+
+    // Initialize the extractor timestamps.
+    initExtractorTimestamps();
+
+    // Read 5s of each track at a time.
+    const int64_t chunkDurationUs = SEC_TO_USEC(5);
+    int64_t chunkEndTimeUs = chunkDurationUs;
+
+    // Loop until all tracks have reached End Of Stream.
+    while (trackEosCount < mTrackCount) {
+        for (int trackIndex = 0; trackIndex < mTrackCount; trackIndex++) {
+            if (trackReachedEos[trackIndex]) continue;
+
+            // Advance current track to next chunk end time.
+            do {
+                media_status_t status = sampleReader->getSampleInfoForTrack(trackIndex, &info);
+                if (status != AMEDIA_OK) {
+                    ASSERT_EQ(status, AMEDIA_ERROR_END_OF_STREAM);
+                    ASSERT_TRUE((info.flags & SAMPLE_FLAG_END_OF_STREAM) != 0);
+                    trackReachedEos[trackIndex] = true;
+                    trackEosCount++;
+                    break;
+                }
+                ASSERT_TRUE((info.flags & SAMPLE_FLAG_END_OF_STREAM) == 0);
+                readerTimestamps[trackIndex].push_back(info.presentationTimeUs);
+                sampleReader->advanceTrack(trackIndex);
+            } while (info.presentationTimeUs < chunkEndTimeUs);
+        }
+        chunkEndTimeUs += chunkDurationUs;
+    }
+
+    for (int trackIndex = 0; trackIndex < mTrackCount; trackIndex++) {
+        LOG(DEBUG) << "Track " << trackIndex << ", comparing "
+                   << readerTimestamps[trackIndex].size() << " samples.";
+        ASSERT_EQ(readerTimestamps[trackIndex].size(), mExtractorTimestamps[trackIndex].size());
+        for (size_t sampleIndex = 0; sampleIndex < readerTimestamps[trackIndex].size();
+             sampleIndex++) {
+            ASSERT_EQ(readerTimestamps[trackIndex][sampleIndex],
+                      mExtractorTimestamps[trackIndex][sampleIndex]);
+        }
+    }
+}
+
+TEST_F(MediaSampleReaderNDKTests, TestInvalidFd) {
+    std::shared_ptr<MediaSampleReader> sampleReader =
+            MediaSampleReaderNDK::createFromFd(0, 0, mFileSize);
+    ASSERT_TRUE(sampleReader == nullptr);
+
+    sampleReader = MediaSampleReaderNDK::createFromFd(-1, 0, mFileSize);
+    ASSERT_TRUE(sampleReader == nullptr);
+}
+
+TEST_F(MediaSampleReaderNDKTests, TestZeroSize) {
+    std::shared_ptr<MediaSampleReader> sampleReader =
+            MediaSampleReaderNDK::createFromFd(mSourceFd, 0, 0);
+    ASSERT_TRUE(sampleReader == nullptr);
+}
+
+TEST_F(MediaSampleReaderNDKTests, TestInvalidOffset) {
+    std::shared_ptr<MediaSampleReader> sampleReader =
+            MediaSampleReaderNDK::createFromFd(mSourceFd, mFileSize, mFileSize);
+    ASSERT_TRUE(sampleReader == nullptr);
+}
+
+}  // namespace android
+
+int main(int argc, char** argv) {
+    ::testing::InitGoogleTest(&argc, argv);
+    return RUN_ALL_TESTS();
+}
diff --git a/media/libmediatranscoding/transcoder/tests/README.md b/media/libmediatranscoding/transcoder/tests/README.md
new file mode 100644
index 0000000..59417b0
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/tests/README.md
@@ -0,0 +1,14 @@
+## Transcoder Testing ##
+---
+#### Transcoder unit tests :
+To run all transcoder unit tests, run the supplied script from this folder:
+
+```
+./build_and_run_all_unit_tests.sh
+```
+
+To run individual unit test modules, use atest:
+
+```
+atest MediaSampleReaderNDK
+```
diff --git a/media/libmediatranscoding/transcoder/tests/assets/cubicle_avc_480x240_aac_24KHz.mp4 b/media/libmediatranscoding/transcoder/tests/assets/cubicle_avc_480x240_aac_24KHz.mp4
new file mode 100644
index 0000000..ef7e1b7
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/tests/assets/cubicle_avc_480x240_aac_24KHz.mp4
Binary files differ
diff --git a/media/libmediatranscoding/transcoder/tests/build_and_run_all_unit_tests.sh b/media/libmediatranscoding/transcoder/tests/build_and_run_all_unit_tests.sh
new file mode 100755
index 0000000..2d9dccf
--- /dev/null
+++ b/media/libmediatranscoding/transcoder/tests/build_and_run_all_unit_tests.sh
@@ -0,0 +1,26 @@
+#!/bin/bash
+#
+# Run tests in this directory.
+#
+
+if [ "$SYNC_FINISHED" != true ]; then
+  if [ -z "$ANDROID_BUILD_TOP" ]; then
+      echo "Android build environment not set"
+      exit -1
+  fi
+
+  # ensure we have mm
+  . $ANDROID_BUILD_TOP/build/envsetup.sh
+
+  mm
+
+  echo "waiting for device"
+
+  adb root && adb wait-for-device remount && adb sync
+fi
+adb push assets /data/local/tmp/TranscoderTestAssets
+
+echo "========================================"
+
+echo "testing MediaSampleReaderNDK"
+adb shell /data/nativetest64/MediaSampleReaderNDKTests/MediaSampleReaderNDKTests
diff --git a/media/libstagefright/ACodec.cpp b/media/libstagefright/ACodec.cpp
index 73d3a0b..1a0010f 100644
--- a/media/libstagefright/ACodec.cpp
+++ b/media/libstagefright/ACodec.cpp
@@ -555,6 +555,7 @@
       mShutdownInProgress(false),
       mExplicitShutdown(false),
       mIsLegacyVP9Decoder(false),
+      mIsStreamCorruptFree(false),
       mEncoderDelay(0),
       mEncoderPadding(0),
       mRotationDegrees(0),
@@ -2306,6 +2307,12 @@
         mChannelMaskPresent = false;
     }
 
+    int32_t isCorruptFree = 0;
+    if (msg->findInt32("corrupt-free", &isCorruptFree)) {
+        mIsStreamCorruptFree = isCorruptFree == 1 ? true : false;
+        ALOGV("corrupt-free=[%d]", mIsStreamCorruptFree);
+    }
+
     int32_t maxInputSize;
     if (msg->findInt32("max-input-size", &maxInputSize)) {
         err = setMinBufferSize(kPortIndexInput, (size_t)maxInputSize);
@@ -4110,6 +4117,29 @@
         ALOGI("setupVideoEncoder succeeded");
     }
 
+    // Video should be encoded as stand straight because RTP protocol
+    // can provide rotation information only if CVO is supported.
+    // This needs to be added to support non-CVO case for video streaming scenario.
+    int32_t rotation = 0;
+    if (msg->findInt32("rotation-degrees", &rotation)) {
+        OMX_CONFIG_ROTATIONTYPE config;
+        InitOMXParams(&config);
+        config.nPortIndex = kPortIndexOutput;
+        status_t err = mOMXNode->getConfig(
+                (OMX_INDEXTYPE)OMX_IndexConfigCommonRotate, &config, sizeof(config));
+        if (err != OK) {
+            ALOGW("Failed to getConfig of OMX_IndexConfigCommonRotate(err %d)", err);
+        }
+        config.nRotation = rotation;
+        err = mOMXNode->setConfig(
+                (OMX_INDEXTYPE)OMX_IndexConfigCommonRotate, &config, sizeof(config));
+
+        ALOGD("Applying encoder-rotation=[%d] to video encoder.", config.nRotation);
+        if (err != OK) {
+            ALOGW("Failed to setConfig of OMX_IndexConfigCommonRotate(err %d)", err);
+        }
+    }
+
     return err;
 }
 
@@ -5957,6 +5987,12 @@
         return false;
     }
 
+    if (mCodec->mIsStreamCorruptFree && data1 == (OMX_U32)OMX_ErrorStreamCorrupt) {
+        ALOGV("[%s] handle OMX_ErrorStreamCorrupt as a normal operation",
+                mCodec->mComponentName.c_str());
+        return true;
+    }
+
     ALOGE("[%s] ERROR(0x%08x)", mCodec->mComponentName.c_str(), data1);
 
     // verify OMX component sends back an error we expect.
@@ -6064,6 +6100,13 @@
         return;
     }
 
+    int32_t cvo;
+    if (mCodec->mNativeWindow != NULL && buffer != NULL &&
+            buffer->meta()->findInt32("cvo", &cvo)) {
+        ALOGV("cvo(%d) found in buffer #%u", cvo, bufferID);
+        setNativeWindowRotation(mCodec->mNativeWindow.get(), cvo);
+    }
+
     info->mStatus = BufferInfo::OWNED_BY_US;
     info->mData = buffer;
 
diff --git a/media/libstagefright/FrameDecoder.cpp b/media/libstagefright/FrameDecoder.cpp
index 734f5bb..965b6dd 100644
--- a/media/libstagefright/FrameDecoder.cpp
+++ b/media/libstagefright/FrameDecoder.cpp
@@ -19,6 +19,7 @@
 
 #include "include/FrameDecoder.h"
 #include "include/FrameCaptureLayer.h"
+#include "include/HevcUtils.h"
 #include <binder/MemoryBase.h>
 #include <binder/MemoryHeapBase.h>
 #include <gui/Surface.h>
@@ -456,7 +457,8 @@
         const sp<IMediaSource> &source)
     : FrameDecoder(componentName, trackMeta, source),
       mFrame(NULL),
-      mIsAvcOrHevc(false),
+      mIsAvc(false),
+      mIsHevc(false),
       mSeekMode(MediaSource::ReadOptions::SEEK_PREVIOUS_SYNC),
       mTargetTimeUs(-1LL),
       mDefaultSampleDurationUs(0) {
@@ -479,8 +481,8 @@
         return NULL;
     }
 
-    mIsAvcOrHevc = !strcasecmp(mime, MEDIA_MIMETYPE_VIDEO_AVC)
-            || !strcasecmp(mime, MEDIA_MIMETYPE_VIDEO_HEVC);
+    mIsAvc = !strcasecmp(mime, MEDIA_MIMETYPE_VIDEO_AVC);
+    mIsHevc = !strcasecmp(mime, MEDIA_MIMETYPE_VIDEO_HEVC);
 
     if (frameTimeUs < 0) {
         int64_t thumbNailTime = -1ll;
@@ -543,8 +545,10 @@
         ALOGV("Seeking closest: targetTimeUs=%lld", (long long)mTargetTimeUs);
     }
 
-    if (mIsAvcOrHevc && !isSeekingClosest
-            && IsIDR(codecBuffer->data(), codecBuffer->size())) {
+    if (!isSeekingClosest
+            && ((mIsAvc && IsIDR(codecBuffer->data(), codecBuffer->size()))
+            || (mIsHevc && IsIDR(
+            codecBuffer->data(), codecBuffer->size())))) {
         // Only need to decode one IDR frame, unless we're seeking with CLOSEST
         // option, in which case we need to actually decode to targetTimeUs.
         *flags |= MediaCodec::BUFFER_FLAG_EOS;
diff --git a/media/libstagefright/HevcUtils.cpp b/media/libstagefright/HevcUtils.cpp
index 482a1a7..9faa28c 100644
--- a/media/libstagefright/HevcUtils.cpp
+++ b/media/libstagefright/HevcUtils.cpp
@@ -32,7 +32,10 @@
 
 namespace android {
 
-static const uint8_t kHevcNalUnitTypes[5] = {
+static const uint8_t kHevcNalUnitTypes[8] = {
+    kHevcNalUnitTypeCodedSliceIdr,
+    kHevcNalUnitTypeCodedSliceIdrNoLP,
+    kHevcNalUnitTypeCodedSliceCra,
     kHevcNalUnitTypeVps,
     kHevcNalUnitTypeSps,
     kHevcNalUnitTypePps,
@@ -488,4 +491,26 @@
     return OK;
 }
 
+bool HevcParameterSets::IsHevcIDR(const uint8_t *data, size_t size) {
+    bool foundIDR = false;
+    const uint8_t *nalStart;
+    size_t nalSize;
+    while (!foundIDR && getNextNALUnit(&data, &size, &nalStart, &nalSize, true) == OK) {
+        if (nalSize == 0) {
+            ALOGE("Encountered zero-length HEVC NAL");
+            return false;
+        }
+
+        uint8_t nalType = (nalStart[0] & 0x7E) >> 1;
+        switch(nalType) {
+            case kHevcNalUnitTypeCodedSliceIdr:
+            case kHevcNalUnitTypeCodedSliceIdrNoLP:
+            case kHevcNalUnitTypeCodedSliceCra:
+                foundIDR = true;
+                break;
+        }
+    }
+
+    return foundIDR;
+}
 }  // namespace android
diff --git a/media/libstagefright/MediaCodecSource.cpp b/media/libstagefright/MediaCodecSource.cpp
index 1395c27..bc656a2 100644
--- a/media/libstagefright/MediaCodecSource.cpp
+++ b/media/libstagefright/MediaCodecSource.cpp
@@ -435,6 +435,30 @@
     buffer->release();
 }
 
+status_t MediaCodecSource::setEncodingBitrate(int32_t bitRate) {
+    ALOGV("setEncodingBitrate (%d)", bitRate);
+
+    if (mEncoder == NULL) {
+        ALOGW("setEncodingBitrate (%d) : mEncoder is null", bitRate);
+        return BAD_VALUE;
+    }
+
+    sp<AMessage> params = new AMessage;
+    params->setInt32("video-bitrate", bitRate);
+
+    return mEncoder->setParameters(params);
+}
+
+status_t MediaCodecSource::requestIDRFrame() {
+    if (mEncoder == NULL) {
+        ALOGW("requestIDRFrame : mEncoder is null");
+        return BAD_VALUE;
+    } else {
+        mEncoder->requestIDRFrame();
+        return OK;
+    }
+}
+
 MediaCodecSource::MediaCodecSource(
         const sp<ALooper> &looper,
         const sp<AMessage> &outputFormat,
diff --git a/media/libstagefright/SurfaceUtils.cpp b/media/libstagefright/SurfaceUtils.cpp
index 4c94baa..85ff474 100644
--- a/media/libstagefright/SurfaceUtils.cpp
+++ b/media/libstagefright/SurfaceUtils.cpp
@@ -165,6 +165,22 @@
     ALOGW_IF(err != 0, "failed to set cta861_3 metadata on surface (%d)", err);
 }
 
+status_t setNativeWindowRotation(
+        ANativeWindow *nativeWindow /* nonnull */, int rotation) {
+
+    int transform = 0;
+    if ((rotation % 90) == 0) {
+        switch ((rotation / 90) & 3) {
+            case 1:  transform = HAL_TRANSFORM_ROT_90;  break;
+            case 2:  transform = HAL_TRANSFORM_ROT_180; break;
+            case 3:  transform = HAL_TRANSFORM_ROT_270; break;
+            default: transform = 0;                     break;
+        }
+    }
+
+    return native_window_set_buffers_transform(nativeWindow, transform);
+}
+
 status_t pushBlankBuffersToNativeWindow(ANativeWindow *nativeWindow /* nonnull */) {
     status_t err = NO_ERROR;
     ANativeWindowBuffer* anb = NULL;
diff --git a/media/libstagefright/include/FrameDecoder.h b/media/libstagefright/include/FrameDecoder.h
index 19ae0e3..bca7f01 100644
--- a/media/libstagefright/include/FrameDecoder.h
+++ b/media/libstagefright/include/FrameDecoder.h
@@ -135,7 +135,8 @@
 private:
     sp<FrameCaptureLayer> mCaptureLayer;
     VideoFrame *mFrame;
-    bool mIsAvcOrHevc;
+    bool mIsAvc;
+    bool mIsHevc;
     MediaSource::ReadOptions::SeekMode mSeekMode;
     int64_t mTargetTimeUs;
     List<int64_t> mSampleDurations;
diff --git a/media/libstagefright/include/HevcUtils.h b/media/libstagefright/include/HevcUtils.h
index 0f59631..d2a86eb 100644
--- a/media/libstagefright/include/HevcUtils.h
+++ b/media/libstagefright/include/HevcUtils.h
@@ -30,6 +30,10 @@
 namespace android {
 
 enum {
+    kHevcNalUnitTypeCodedSliceIdr = 19,
+    kHevcNalUnitTypeCodedSliceIdrNoLP = 20,
+    kHevcNalUnitTypeCodedSliceCra = 21,
+
     kHevcNalUnitTypeVps = 32,
     kHevcNalUnitTypeSps = 33,
     kHevcNalUnitTypePps = 34,
@@ -92,6 +96,7 @@
     status_t makeHvcc(uint8_t *hvcc, size_t *hvccSize, size_t nalSizeLength);
 
     Info getInfo() const { return mInfo; }
+    static bool IsHevcIDR(const uint8_t *data, size_t size);
 
 private:
     status_t parseVps(const uint8_t* data, size_t size);
diff --git a/media/libstagefright/include/media/stagefright/ACodec.h b/media/libstagefright/include/media/stagefright/ACodec.h
index 83e92b9..cc40f76 100644
--- a/media/libstagefright/include/media/stagefright/ACodec.h
+++ b/media/libstagefright/include/media/stagefright/ACodec.h
@@ -272,6 +272,7 @@
     bool mShutdownInProgress;
     bool mExplicitShutdown;
     bool mIsLegacyVP9Decoder;
+    bool mIsStreamCorruptFree;
 
     // If "mKeepComponentAllocated" we only transition back to Loaded state
     // and do not release the component instance.
diff --git a/media/libstagefright/include/media/stagefright/MediaCodec.h b/media/libstagefright/include/media/stagefright/MediaCodec.h
index 022c48e..736f626 100644
--- a/media/libstagefright/include/media/stagefright/MediaCodec.h
+++ b/media/libstagefright/include/media/stagefright/MediaCodec.h
@@ -81,6 +81,13 @@
         BUFFER_FLAG_MUXER_DATA    = 16,
     };
 
+    enum CVODegree {
+        CVO_DEGREE_0   = 0,
+        CVO_DEGREE_90  = 90,
+        CVO_DEGREE_180 = 180,
+        CVO_DEGREE_270 = 270,
+    };
+
     enum {
         CB_INPUT_AVAILABLE = 1,
         CB_OUTPUT_AVAILABLE = 2,
diff --git a/media/libstagefright/include/media/stagefright/MediaCodecSource.h b/media/libstagefright/include/media/stagefright/MediaCodecSource.h
index 2f98af1..0f7b535 100644
--- a/media/libstagefright/include/media/stagefright/MediaCodecSource.h
+++ b/media/libstagefright/include/media/stagefright/MediaCodecSource.h
@@ -64,12 +64,15 @@
 
     // MediaBufferObserver
     virtual void signalBufferReturned(MediaBufferBase *buffer);
+    virtual status_t setEncodingBitrate(int32_t bitRate /* bps */);
 
     // for AHandlerReflector
     void onMessageReceived(const sp<AMessage> &msg);
 
 
 
+    status_t requestIDRFrame();
+
 protected:
     virtual ~MediaCodecSource();
 
diff --git a/media/libstagefright/include/media/stagefright/MediaWriter.h b/media/libstagefright/include/media/stagefright/MediaWriter.h
index 08e54b3..fd2c171 100644
--- a/media/libstagefright/include/media/stagefright/MediaWriter.h
+++ b/media/libstagefright/include/media/stagefright/MediaWriter.h
@@ -55,6 +55,10 @@
     virtual void setStartTimeOffsetMs(int /*ms*/) {}
     virtual int32_t getStartTimeOffsetMs() const { return 0; }
     virtual status_t setNextFd(int /*fd*/) { return INVALID_OPERATION; }
+    virtual void updateCVODegrees(int32_t /*cvoDegrees*/) {}
+    virtual void updatePayloadType(int32_t /*payloadType*/) {}
+    virtual void updateSocketNetwork(int64_t /*socketNetwork*/) {}
+    virtual uint32_t getSequenceNum() { return 0; }
 
 protected:
     virtual ~MediaWriter() {}
diff --git a/media/libstagefright/include/media/stagefright/MetaDataBase.h b/media/libstagefright/include/media/stagefright/MetaDataBase.h
index 3b701f6..847093d 100644
--- a/media/libstagefright/include/media/stagefright/MetaDataBase.h
+++ b/media/libstagefright/include/media/stagefright/MetaDataBase.h
@@ -241,6 +241,15 @@
 
     // Treat empty track as malformed for MediaRecorder.
     kKeyEmptyTrackMalFormed = 'nemt', // bool (int32_t)
+
+    kKeySps              = 'sSps', // int32_t, indicates that a buffer is sps (value ignored).
+    kKeyPps              = 'sPps', // int32_t, indicates that a buffer is pps (value ignored).
+    kKeySelfID           = 'sfid', // int32_t, source ID to identify itself on RTP protocol.
+    kKeyPayloadType      = 'pTyp', // int32_t, SDP negotiated payload type.
+    kKeyRtpExtMap        = 'extm', // int32_t, rtp extension ID for cvo on RTP protocol.
+    kKeyRtpCvoDegrees    = 'cvod', // int32_t, rtp cvo degrees as per 3GPP 26.114.
+    kKeyRtpDscp          = 'dscp', // int32_t, DSCP(Differentiated services codepoint) of RFC 2474.
+    kKeySocketNetwork    = 'sNet', // int64_t, socket will be bound to network handle.
 };
 
 enum {
diff --git a/media/libstagefright/include/media/stagefright/RemoteDataSource.h b/media/libstagefright/include/media/stagefright/RemoteDataSource.h
index d82be8a..d605cda 100644
--- a/media/libstagefright/include/media/stagefright/RemoteDataSource.h
+++ b/media/libstagefright/include/media/stagefright/RemoteDataSource.h
@@ -41,6 +41,11 @@
         close();
     }
     virtual sp<IMemory> getIMemory() {
+        Mutex::Autolock lock(mLock);
+        if (mMemory.get() == nullptr) {
+            ALOGE("getIMemory() failed, mMemory is nullptr");
+            return nullptr;
+        }
         return mMemory;
     }
     virtual ssize_t readAt(off64_t offset, size_t size) {
@@ -48,19 +53,35 @@
         if (size > kBufferSize) {
             size = kBufferSize;
         }
+
+        Mutex::Autolock lock(mLock);
+        if (mSource.get() == nullptr) {
+            ALOGE("readAt() failed, mSource is nullptr");
+            return 0;
+        }
         return mSource->readAt(offset, mMemory->unsecurePointer(), size);
     }
     virtual status_t getSize(off64_t *size) {
+        Mutex::Autolock lock(mLock);
+        if (mSource.get() == nullptr) {
+            ALOGE("getSize() failed, mSource is nullptr");
+            return INVALID_OPERATION;
+        }
         return mSource->getSize(size);
     }
     virtual void close() {
         // Protect strong pointer assignments. This also can be called from the binder
         // clean-up procedure which is running on a separate thread.
-        Mutex::Autolock lock(mCloseLock);
+        Mutex::Autolock lock(mLock);
         mSource = nullptr;
         mMemory = nullptr;
     }
     virtual uint32_t getFlags() {
+        Mutex::Autolock lock(mLock);
+        if (mSource.get() == nullptr) {
+            ALOGE("getSize() failed, mSource is nullptr");
+            return 0;
+        }
         return mSource->flags();
     }
     virtual String8 toString()  {
@@ -75,9 +96,10 @@
     sp<IMemory> mMemory;
     sp<DataSource> mSource;
     String8 mName;
-    Mutex mCloseLock;
+    Mutex mLock;
 
     explicit RemoteDataSource(const sp<DataSource> &source) {
+        Mutex::Autolock lock(mLock);
         mSource = source;
         sp<MemoryDealer> memoryDealer = new MemoryDealer(kBufferSize, "RemoteDataSource");
         mMemory = memoryDealer->allocate(kBufferSize);
diff --git a/media/libstagefright/include/media/stagefright/SurfaceUtils.h b/media/libstagefright/include/media/stagefright/SurfaceUtils.h
index ae55c65..35b3fa2 100644
--- a/media/libstagefright/include/media/stagefright/SurfaceUtils.h
+++ b/media/libstagefright/include/media/stagefright/SurfaceUtils.h
@@ -38,6 +38,8 @@
         int width, int height, int format, int rotation, int usage, bool reconnect);
 void setNativeWindowHdrMetadata(
         ANativeWindow *nativeWindow /* nonnull */, HDRStaticInfo *info /* nonnull */);
+status_t setNativeWindowRotation(
+        ANativeWindow *nativeWindow /* nonnull */, int rotation);
 status_t pushBlankBuffersToNativeWindow(ANativeWindow *nativeWindow /* nonnull */);
 status_t nativeWindowConnect(ANativeWindow *surface, const char *reason);
 status_t nativeWindowDisconnect(ANativeWindow *surface, const char *reason);
diff --git a/media/libstagefright/rtsp/AAVCAssembler.cpp b/media/libstagefright/rtsp/AAVCAssembler.cpp
index 4bc67e8..0164040 100644
--- a/media/libstagefright/rtsp/AAVCAssembler.cpp
+++ b/media/libstagefright/rtsp/AAVCAssembler.cpp
@@ -51,7 +51,66 @@
         return NOT_ENOUGH_DATA;
     }
 
+    sp<ABuffer> buffer = *queue->begin();
+    int32_t rtpTime;
+    CHECK(buffer->meta()->findInt32("rtp-time", &rtpTime));
+    int64_t startTime = source->mFirstSysTime / 1000;
+    int64_t nowTime = ALooper::GetNowUs() / 1000;
+    int64_t playedTime = nowTime - startTime;
+    int32_t playedTimeRtp = source->mFirstRtpTime +
+        (((uint32_t)playedTime) * (source->mClockRate / 1000));
+    const int32_t jitterTime = source->mClockRate / 5;  // 200ms
+    int32_t expiredTimeInJb = rtpTime + jitterTime;
+    bool isExpired = expiredTimeInJb <= (playedTimeRtp);
+    bool isTooLate200 = expiredTimeInJb < (playedTimeRtp - jitterTime);
+    bool isTooLate300 = expiredTimeInJb < (playedTimeRtp - (jitterTime * 3 / 2));
+
+    if (mShowQueue && mShowQueueCnt < 20) {
+        showCurrentQueue(queue);
+        ALOGD("start=%lld, now=%lld, played=%lld", (long long)startTime,
+                (long long)nowTime, (long long)playedTime);
+        ALOGD("rtp-time(JB)=%d, played-rtp-time(JB)=%d, expired-rtp-time(JB)=%d isExpired=%d",
+                rtpTime, playedTimeRtp, expiredTimeInJb, isExpired);
+        mShowQueueCnt++;
+    }
+
+    ALOGV("start=%lld, now=%lld, played=%lld", (long long)startTime,
+            (long long)nowTime, (long long)playedTime);
+    ALOGV("rtp-time(JB)=%d, played-rtp-time(JB)=%d, expired-rtp-time(JB)=%d isExpired=%d",
+            rtpTime, playedTimeRtp, expiredTimeInJb, isExpired);
+
+    if (!isExpired) {
+        ALOGV("buffering in jitter buffer.");
+        return NOT_ENOUGH_DATA;
+    }
+
+    if (isTooLate200)
+        ALOGW("=== WARNING === buffer arrived 200ms late. === WARNING === ");
+
+    if (isTooLate300) {
+        ALOGW("buffer arrived too late. 300ms..");
+        ALOGW("start=%lld, now=%lld, played=%lld", (long long)startTime,
+                (long long)nowTime, (long long)playedTime);
+        ALOGW("rtp-time(JB)=%d, plyed-rtp-time(JB)=%d, exp-rtp-time(JB)=%d diff=%lld isExpired=%d",
+                rtpTime, playedTimeRtp, expiredTimeInJb,
+                ((long long)playedTimeRtp) - expiredTimeInJb, isExpired);
+        ALOGW("expected Seq. NO =%d", buffer->int32Data());
+
+        List<sp<ABuffer> >::iterator it = queue->begin();
+        while (it != queue->end()) {
+            CHECK((*it)->meta()->findInt32("rtp-time", &rtpTime));
+            if (rtpTime + jitterTime >= playedTimeRtp) {
+                mNextExpectedSeqNo = (*it)->int32Data();
+                break;
+            }
+            it++;
+        }
+        source->noticeAbandonBuffer();
+    }
+
     if (mNextExpectedSeqNoValid) {
+        int32_t size = queue->size();
+        int32_t cnt = 0;
         List<sp<ABuffer> >::iterator it = queue->begin();
         while (it != queue->end()) {
             if ((uint32_t)(*it)->int32Data() >= mNextExpectedSeqNo) {
@@ -59,14 +118,19 @@
             }
 
             it = queue->erase(it);
+            cnt++;
         }
 
+        if (cnt > 0) {
+            source->noticeAbandonBuffer(cnt);
+            ALOGW("delete %d of %d buffers", cnt, size);
+        }
         if (queue->empty()) {
             return NOT_ENOUGH_DATA;
         }
     }
 
-    sp<ABuffer> buffer = *queue->begin();
+    buffer = *queue->begin();
 
     if (!mNextExpectedSeqNoValid) {
         mNextExpectedSeqNoValid = true;
@@ -290,6 +354,7 @@
     unit->data()[0] = (nri << 5) | nalType;
 
     size_t offset = 1;
+    int32_t cvo = -1;
     List<sp<ABuffer> >::iterator it = queue->begin();
     for (size_t i = 0; i < totalCount; ++i) {
         const sp<ABuffer> &buffer = *it;
@@ -300,6 +365,8 @@
 #endif
 
         memcpy(unit->data() + offset, buffer->data() + 2, buffer->size() - 2);
+
+        buffer->meta()->findInt32("cvo", &cvo);
         offset += buffer->size() - 2;
 
         it = queue->erase(it);
@@ -307,6 +374,10 @@
 
     unit->setRange(0, totalSize);
 
+    if (cvo >= 0) {
+        unit->meta()->setInt32("cvo", cvo);
+    }
+
     addSingleNALUnit(unit);
 
     ALOGV("successfully assembled a NAL unit from fragments.");
@@ -327,6 +398,7 @@
 
     sp<ABuffer> accessUnit = new ABuffer(totalSize);
     size_t offset = 0;
+    int32_t cvo = -1;
     for (List<sp<ABuffer> >::iterator it = mNALUnits.begin();
          it != mNALUnits.end(); ++it) {
         memcpy(accessUnit->data() + offset, "\x00\x00\x00\x01", 4);
@@ -335,6 +407,8 @@
         sp<ABuffer> nal = *it;
         memcpy(accessUnit->data() + offset, nal->data(), nal->size());
         offset += nal->size();
+
+        nal->meta()->findInt32("cvo", &cvo);
     }
 
     CopyTimes(accessUnit, *mNALUnits.begin());
@@ -343,6 +417,9 @@
     printf(mAccessUnitDamaged ? "X" : ".");
     fflush(stdout);
 #endif
+    if (cvo >= 0) {
+        accessUnit->meta()->setInt32("cvo", cvo);
+    }
 
     if (mAccessUnitDamaged) {
         accessUnit->meta()->setInt32("damaged", true);
diff --git a/media/libstagefright/rtsp/AHEVCAssembler.cpp b/media/libstagefright/rtsp/AHEVCAssembler.cpp
new file mode 100644
index 0000000..93869fb
--- /dev/null
+++ b/media/libstagefright/rtsp/AHEVCAssembler.cpp
@@ -0,0 +1,428 @@
+/*
+ * Copyright (C) 2010 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_NDEBUG 0
+#define LOG_TAG "AHEVCAssembler"
+#include <utils/Log.h>
+
+#include "AHEVCAssembler.h"
+
+#include "ARTPSource.h"
+
+#include <media/stagefright/foundation/ABuffer.h>
+#include <media/stagefright/foundation/ADebug.h>
+#include <media/stagefright/foundation/AMessage.h>
+#include <media/stagefright/foundation/hexdump.h>
+
+#include <stdint.h>
+
+#define H265_NALU_MASK 0x3F
+#define H265_NALU_VPS 0x20
+#define H265_NALU_SPS 0x21
+#define H265_NALU_PPS 0x22
+#define H265_NALU_AP 0x30
+#define H265_NALU_FU 0x31
+#define H265_NALU_PACI 0x32
+
+
+namespace android {
+
+// static
+AHEVCAssembler::AHEVCAssembler(const sp<AMessage> &notify)
+    : mNotifyMsg(notify),
+      mAccessUnitRTPTime(0),
+      mNextExpectedSeqNoValid(false),
+      mNextExpectedSeqNo(0),
+      mAccessUnitDamaged(false) {
+
+      ALOGV("Constructor");
+}
+
+AHEVCAssembler::~AHEVCAssembler() {
+}
+
+ARTPAssembler::AssemblyStatus AHEVCAssembler::addNALUnit(
+        const sp<ARTPSource> &source) {
+    List<sp<ABuffer> > *queue = source->queue();
+
+    if (queue->empty()) {
+        return NOT_ENOUGH_DATA;
+    }
+
+    sp<ABuffer> buffer = *queue->begin();
+    int32_t rtpTime;
+    CHECK(buffer->meta()->findInt32("rtp-time", &rtpTime));
+    int64_t startTime = source->mFirstSysTime / 1000;
+    int64_t nowTime = ALooper::GetNowUs() / 1000;
+    int64_t playedTime = nowTime - startTime;
+    int32_t playedTimeRtp = source->mFirstRtpTime +
+        (((uint32_t)playedTime) * (source->mClockRate / 1000));
+    int32_t expiredTimeInJb = rtpTime + (source->mClockRate / 5);
+    bool isExpired = expiredTimeInJb <= (playedTimeRtp);
+    ALOGV("start=%lld, now=%lld, played=%lld", (long long)startTime,
+            (long long)nowTime, (long long)playedTime);
+    ALOGV("rtp-time(JB)=%d, played-rtp-time(JB)=%d, expired-rtp-time(JB)=%d isExpired=%d",
+            rtpTime, playedTimeRtp, expiredTimeInJb, isExpired);
+
+    if (!isExpired) {
+        ALOGV("buffering in jitter buffer.");
+        return NOT_ENOUGH_DATA;
+    }
+
+    if (mNextExpectedSeqNoValid) {
+        List<sp<ABuffer> >::iterator it = queue->begin();
+        while (it != queue->end()) {
+            if ((uint32_t)(*it)->int32Data() >= mNextExpectedSeqNo) {
+                break;
+            }
+
+            it = queue->erase(it);
+        }
+
+        if (queue->empty()) {
+            return NOT_ENOUGH_DATA;
+        }
+    }
+
+    buffer = *queue->begin();
+
+    if (!mNextExpectedSeqNoValid) {
+        mNextExpectedSeqNoValid = true;
+        mNextExpectedSeqNo = (uint32_t)buffer->int32Data();
+    } else if ((uint32_t)buffer->int32Data() != mNextExpectedSeqNo) {
+        ALOGV("Not the sequence number I expected");
+
+        return WRONG_SEQUENCE_NUMBER;
+    }
+
+    const uint8_t *data = buffer->data();
+    size_t size = buffer->size();
+
+    if (size < 1 || (data[0] & 0x80)) {
+        // Corrupt.
+
+        ALOGV("Ignoring corrupt buffer.");
+        queue->erase(queue->begin());
+
+        ++mNextExpectedSeqNo;
+        return MALFORMED_PACKET;
+    }
+
+    unsigned nalType = (data[0] >> 1) & H265_NALU_MASK;
+    if (nalType > 0 && nalType < H265_NALU_AP) {
+        addSingleNALUnit(buffer);
+        queue->erase(queue->begin());
+        ++mNextExpectedSeqNo;
+        return OK;
+    } else if (nalType == H265_NALU_FU) {
+        // FU-A
+        return addFragmentedNALUnit(queue);
+    } else if (nalType == H265_NALU_AP) {
+        // STAP-A
+        bool success = addSingleTimeAggregationPacket(buffer);
+        queue->erase(queue->begin());
+        ++mNextExpectedSeqNo;
+
+        return success ? OK : MALFORMED_PACKET;
+    } else if (nalType == 0) {
+        ALOGV("Ignoring undefined nal type.");
+
+        queue->erase(queue->begin());
+        ++mNextExpectedSeqNo;
+
+        return OK;
+    } else {
+        ALOGV("Ignoring unsupported buffer (nalType=%d)", nalType);
+
+        queue->erase(queue->begin());
+        ++mNextExpectedSeqNo;
+
+        return MALFORMED_PACKET;
+    }
+}
+
+void AHEVCAssembler::addSingleNALUnit(const sp<ABuffer> &buffer) {
+    ALOGV("addSingleNALUnit of size %zu", buffer->size());
+#if !LOG_NDEBUG
+    hexdump(buffer->data(), buffer->size());
+#endif
+
+    uint32_t rtpTime;
+    CHECK(buffer->meta()->findInt32("rtp-time", (int32_t *)&rtpTime));
+
+    if (!mNALUnits.empty() && rtpTime != mAccessUnitRTPTime) {
+        submitAccessUnit();
+    }
+    mAccessUnitRTPTime = rtpTime;
+
+    mNALUnits.push_back(buffer);
+}
+
+bool AHEVCAssembler::addSingleTimeAggregationPacket(const sp<ABuffer> &buffer) {
+    const uint8_t *data = buffer->data();
+    size_t size = buffer->size();
+
+    if (size < 3) {
+        ALOGV("Discarding too small STAP-A packet.");
+        return false;
+    }
+
+    ++data;
+    --size;
+    while (size >= 2) {
+        size_t nalSize = (data[0] << 8) | data[1];
+
+        if (size < nalSize + 2) {
+            ALOGV("Discarding malformed STAP-A packet.");
+            return false;
+        }
+
+        sp<ABuffer> unit = new ABuffer(nalSize);
+        memcpy(unit->data(), &data[2], nalSize);
+
+        CopyTimes(unit, buffer);
+
+        addSingleNALUnit(unit);
+
+        data += 2 + nalSize;
+        size -= 2 + nalSize;
+    }
+
+    if (size != 0) {
+        ALOGV("Unexpected padding at end of STAP-A packet.");
+    }
+
+    return true;
+}
+
+ARTPAssembler::AssemblyStatus AHEVCAssembler::addFragmentedNALUnit(
+        List<sp<ABuffer> > *queue) {
+    CHECK(!queue->empty());
+
+    sp<ABuffer> buffer = *queue->begin();
+    const uint8_t *data = buffer->data();
+    size_t size = buffer->size();
+
+    CHECK(size > 0);
+    /*   H265 payload header is 16 bit
+        0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
+       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+       |F|     Type  |  Layer ID | TID |
+       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+     */
+    unsigned indicator = (data[0] >> 1);
+
+    CHECK((indicator & H265_NALU_MASK) == H265_NALU_FU);
+
+    if (size < 3) {
+        ALOGV("Ignoring malformed FU buffer (size = %zu)", size);
+
+        queue->erase(queue->begin());
+        ++mNextExpectedSeqNo;
+        return MALFORMED_PACKET;
+    }
+
+    if (!(data[2] & 0x80)) {
+        // Start bit not set on the first buffer.
+
+        ALOGV("Start bit not set on first buffer");
+
+        queue->erase(queue->begin());
+        ++mNextExpectedSeqNo;
+        return MALFORMED_PACKET;
+    }
+
+    /*  FU INDICATOR HDR
+        0 1 2 3 4 5 6 7
+       +-+-+-+-+-+-+-+-+
+       |S|E|   Type    |
+       +-+-+-+-+-+-+-+-+
+     */
+    uint32_t nalType = data[2] & H265_NALU_MASK;
+    uint32_t tid = data[1] & 0x7;
+    ALOGV("nalType =%u, tid =%u", nalType, tid);
+
+    uint32_t expectedSeqNo = (uint32_t)buffer->int32Data() + 1;
+    size_t totalSize = size - 3;
+    size_t totalCount = 1;
+    bool complete = false;
+
+    if (data[2] & 0x40) {
+        // Huh? End bit also set on the first buffer.
+
+        ALOGV("Grrr. This isn't fragmented at all.");
+
+        complete = true;
+    } else {
+        List<sp<ABuffer> >::iterator it = ++queue->begin();
+        while (it != queue->end()) {
+            ALOGV("sequence length %zu", totalCount);
+
+            const sp<ABuffer> &buffer = *it;
+
+            const uint8_t *data = buffer->data();
+            size_t size = buffer->size();
+
+            if ((uint32_t)buffer->int32Data() != expectedSeqNo) {
+                ALOGV("sequence not complete, expected seqNo %d, got %d",
+                     expectedSeqNo, (uint32_t)buffer->int32Data());
+
+                return WRONG_SEQUENCE_NUMBER;
+            }
+
+            if (size < 3
+                    || ((data[0] >> 1) & H265_NALU_MASK) != indicator
+                    || (data[2] & H265_NALU_MASK) != nalType
+                    || (data[2] & 0x80)) {
+                ALOGV("Ignoring malformed FU buffer.");
+
+                // Delete the whole start of the FU.
+
+                it = queue->begin();
+                for (size_t i = 0; i <= totalCount; ++i) {
+                    it = queue->erase(it);
+                }
+
+                mNextExpectedSeqNo = expectedSeqNo + 1;
+
+                return MALFORMED_PACKET;
+            }
+
+            totalSize += size - 3;
+            ++totalCount;
+
+            expectedSeqNo = expectedSeqNo + 1;
+
+            if (data[2] & 0x40) {
+                // This is the last fragment.
+                complete = true;
+                break;
+            }
+
+            ++it;
+        }
+    }
+
+    if (!complete) {
+        return NOT_ENOUGH_DATA;
+    }
+
+    mNextExpectedSeqNo = expectedSeqNo;
+
+    // We found all the fragments that make up the complete NAL unit.
+
+    // Leave room for the header. So far totalSize did not include the
+    // header byte.
+    totalSize += 2;
+
+    sp<ABuffer> unit = new ABuffer(totalSize);
+    CopyTimes(unit, *queue->begin());
+
+    unit->data()[0] = (nalType << 1);
+    unit->data()[1] = tid;
+
+    size_t offset = 2;
+    List<sp<ABuffer> >::iterator it = queue->begin();
+    for (size_t i = 0; i < totalCount; ++i) {
+        const sp<ABuffer> &buffer = *it;
+
+        ALOGV("piece #%zu/%zu", i + 1, totalCount);
+#if !LOG_NDEBUG
+        hexdump(buffer->data(), buffer->size());
+#endif
+
+        memcpy(unit->data() + offset, buffer->data() + 3, buffer->size() - 3);
+        offset += buffer->size() - 3;
+
+        it = queue->erase(it);
+    }
+
+    unit->setRange(0, totalSize);
+
+    addSingleNALUnit(unit);
+
+    ALOGV("successfully assembled a NAL unit from fragments.");
+
+    return OK;
+}
+
+void AHEVCAssembler::submitAccessUnit() {
+    CHECK(!mNALUnits.empty());
+
+    ALOGV("Access unit complete (%zu nal units)", mNALUnits.size());
+
+    size_t totalSize = 0;
+    for (List<sp<ABuffer> >::iterator it = mNALUnits.begin();
+         it != mNALUnits.end(); ++it) {
+        totalSize += 4 + (*it)->size();
+    }
+
+    sp<ABuffer> accessUnit = new ABuffer(totalSize);
+    size_t offset = 0;
+    for (List<sp<ABuffer> >::iterator it = mNALUnits.begin();
+         it != mNALUnits.end(); ++it) {
+        memcpy(accessUnit->data() + offset, "\x00\x00\x00\x01", 4);
+        offset += 4;
+
+        sp<ABuffer> nal = *it;
+        memcpy(accessUnit->data() + offset, nal->data(), nal->size());
+        offset += nal->size();
+    }
+
+    CopyTimes(accessUnit, *mNALUnits.begin());
+
+#if 0
+    printf(mAccessUnitDamaged ? "X" : ".");
+    fflush(stdout);
+#endif
+
+    if (mAccessUnitDamaged) {
+        accessUnit->meta()->setInt32("damaged", true);
+    }
+
+    mNALUnits.clear();
+    mAccessUnitDamaged = false;
+
+    sp<AMessage> msg = mNotifyMsg->dup();
+    msg->setBuffer("access-unit", accessUnit);
+    msg->post();
+}
+
+ARTPAssembler::AssemblyStatus AHEVCAssembler::assembleMore(
+        const sp<ARTPSource> &source) {
+    AssemblyStatus status = addNALUnit(source);
+    if (status == MALFORMED_PACKET) {
+        mAccessUnitDamaged = true;
+    }
+    return status;
+}
+
+void AHEVCAssembler::packetLost() {
+    CHECK(mNextExpectedSeqNoValid);
+    ALOGV("packetLost (expected %d)", mNextExpectedSeqNo);
+
+    ++mNextExpectedSeqNo;
+
+    mAccessUnitDamaged = true;
+}
+
+void AHEVCAssembler::onByeReceived() {
+    sp<AMessage> msg = mNotifyMsg->dup();
+    msg->setInt32("eos", true);
+    msg->post();
+}
+
+}  // namespace android
diff --git a/media/libstagefright/rtsp/AHEVCAssembler.h b/media/libstagefright/rtsp/AHEVCAssembler.h
new file mode 100644
index 0000000..cc20622
--- /dev/null
+++ b/media/libstagefright/rtsp/AHEVCAssembler.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2010 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef A_HEVC_ASSEMBLER_H_
+
+#define A_HEVC_ASSEMBLER_H_
+
+#include "ARTPAssembler.h"
+
+#include <utils/List.h>
+#include <utils/RefBase.h>
+
+namespace android {
+
+struct ABuffer;
+struct AMessage;
+
+struct AHEVCAssembler : public ARTPAssembler {
+    AHEVCAssembler(const sp<AMessage> &notify);
+
+protected:
+    virtual ~AHEVCAssembler();
+
+    virtual AssemblyStatus assembleMore(const sp<ARTPSource> &source);
+    virtual void onByeReceived();
+    virtual void packetLost();
+
+private:
+    sp<AMessage> mNotifyMsg;
+
+    uint32_t mAccessUnitRTPTime;
+    bool mNextExpectedSeqNoValid;
+    uint32_t mNextExpectedSeqNo;
+    bool mAccessUnitDamaged;
+    List<sp<ABuffer> > mNALUnits;
+
+    AssemblyStatus addNALUnit(const sp<ARTPSource> &source);
+    void addSingleNALUnit(const sp<ABuffer> &buffer);
+    AssemblyStatus addFragmentedNALUnit(List<sp<ABuffer> > *queue);
+    bool addSingleTimeAggregationPacket(const sp<ABuffer> &buffer);
+
+    void submitAccessUnit();
+
+    DISALLOW_EVIL_CONSTRUCTORS(AHEVCAssembler);
+};
+
+}  // namespace android
+
+#endif  // A_HEVC_ASSEMBLER_H_
diff --git a/media/libstagefright/rtsp/APacketSource.cpp b/media/libstagefright/rtsp/APacketSource.cpp
index 574bd7a..8f4df8e 100644
--- a/media/libstagefright/rtsp/APacketSource.cpp
+++ b/media/libstagefright/rtsp/APacketSource.cpp
@@ -454,6 +454,17 @@
 
         mFormat->setInt32(kKeyWidth, width);
         mFormat->setInt32(kKeyHeight, height);
+    } else if (!strncmp(desc.c_str(), "H265/", 5)) {
+        mFormat->setCString(kKeyMIMEType, MEDIA_MIMETYPE_VIDEO_HEVC);
+
+        int32_t width, height;
+        if (!sessionDesc->getDimensions(index, PT, &width, &height)) {
+            width = -1;
+            height = -1;
+        }
+
+        mFormat->setInt32(kKeyWidth, width);
+        mFormat->setInt32(kKeyHeight, height);
     } else if (!strncmp(desc.c_str(), "H263-2000/", 10)
             || !strncmp(desc.c_str(), "H263-1998/", 10)) {
         mFormat->setCString(kKeyMIMEType, MEDIA_MIMETYPE_VIDEO_H263);
diff --git a/media/libstagefright/rtsp/ARTPAssembler.cpp b/media/libstagefright/rtsp/ARTPAssembler.cpp
index befc226..52aa3a0 100644
--- a/media/libstagefright/rtsp/ARTPAssembler.cpp
+++ b/media/libstagefright/rtsp/ARTPAssembler.cpp
@@ -14,6 +14,7 @@
  * limitations under the License.
  */
 
+#define LOG_TAG "ARTPAssembler"
 #include "ARTPAssembler.h"
 
 #include <media/stagefright/foundation/ABuffer.h>
@@ -21,12 +22,16 @@
 #include <media/stagefright/foundation/ALooper.h>
 #include <media/stagefright/foundation/AMessage.h>
 
+#include <android-base/properties.h>
+
 #include <stdint.h>
 
 namespace android {
 
 ARTPAssembler::ARTPAssembler()
-    : mFirstFailureTimeUs(-1) {
+    : mShowQueueCnt(0),
+      mFirstFailureTimeUs(-1) {
+    mShowQueue = android::base::GetBoolProperty("debug.stagefright.rtp", false);
 }
 
 void ARTPAssembler::onPacketReceived(const sp<ARTPSource> &source) {
@@ -141,4 +146,15 @@
     return accessUnit;
 }
 
+void ARTPAssembler::showCurrentQueue(List<sp<ABuffer> > *queue) {
+    AString temp("Queue elem size : ");
+    List<sp<ABuffer> >::iterator it = queue->begin();
+    while (it != queue->end()) {
+        temp.append((*it)->size());
+        temp.append("  \t");
+        it++;
+    }
+    ALOGD("%s",temp.c_str());
+};
+
 }  // namespace android
diff --git a/media/libstagefright/rtsp/ARTPAssembler.h b/media/libstagefright/rtsp/ARTPAssembler.h
index 4082d4c..191f08e 100644
--- a/media/libstagefright/rtsp/ARTPAssembler.h
+++ b/media/libstagefright/rtsp/ARTPAssembler.h
@@ -56,6 +56,11 @@
     static sp<ABuffer> MakeCompoundFromPackets(
             const List<sp<ABuffer> > &frames);
 
+    void showCurrentQueue(List<sp<ABuffer> > *queue);
+
+    bool mShowQueue;
+    int32_t mShowQueueCnt;
+
 private:
     int64_t mFirstFailureTimeUs;
 
diff --git a/media/libstagefright/rtsp/ARTPConnection.cpp b/media/libstagefright/rtsp/ARTPConnection.cpp
index 6a4706d..1346c9a 100644
--- a/media/libstagefright/rtsp/ARTPConnection.cpp
+++ b/media/libstagefright/rtsp/ARTPConnection.cpp
@@ -30,6 +30,8 @@
 #include <media/stagefright/foundation/AString.h>
 #include <media/stagefright/foundation/hexdump.h>
 
+#include <android/multinetwork.h>
+
 #include <arpa/inet.h>
 #include <sys/socket.h>
 
@@ -53,6 +55,7 @@
 const int64_t ARTPConnection::kSelectTimeoutUs = 1000LL;
 
 struct ARTPConnection::StreamInfo {
+    bool isIPv6;
     int mRTPSocket;
     int mRTCPSocket;
     sp<ASessionDescription> mSessionDesc;
@@ -63,14 +66,19 @@
     int64_t mNumRTCPPacketsReceived;
     int64_t mNumRTPPacketsReceived;
     struct sockaddr_in mRemoteRTCPAddr;
+    struct sockaddr_in6 mRemoteRTCPAddr6;
 
     bool mIsInjected;
+
+    // RTCP Extension for CVO
+    int mCVOExtMap; // will be set to 0 if cvo is not negotiated in sdp
 };
 
 ARTPConnection::ARTPConnection(uint32_t flags)
     : mFlags(flags),
       mPollEventPending(false),
-      mLastReceiverReportTimeUs(-1) {
+      mLastReceiverReportTimeUs(-1),
+      mLastBitrateReportTimeUs(-1) {
 }
 
 ARTPConnection::~ARTPConnection() {
@@ -145,6 +153,117 @@
     TRESPASS();
 }
 
+// static
+void ARTPConnection::MakeRTPSocketPair(
+        int *rtpSocket, int *rtcpSocket, const char *localIp, const char *remoteIp,
+        unsigned localPort, unsigned remotePort, int64_t socketNetwork) {
+    bool isIPv6 = false;
+    if (strchr(localIp, ':') != NULL)
+        isIPv6 = true;
+
+    *rtpSocket = socket(isIPv6 ? AF_INET6 : AF_INET, SOCK_DGRAM, 0);
+    CHECK_GE(*rtpSocket, 0);
+
+    bumpSocketBufferSize(*rtpSocket);
+
+    *rtcpSocket = socket(isIPv6 ? AF_INET6 : AF_INET, SOCK_DGRAM, 0);
+    CHECK_GE(*rtcpSocket, 0);
+
+    if (socketNetwork != 0) {
+        ALOGD("trying to bind rtp socket(%d) to network(%llu).",
+                *rtpSocket, (unsigned long long)socketNetwork);
+
+        int result = android_setsocknetwork((net_handle_t)socketNetwork, *rtpSocket);
+        if (result != 0) {
+            ALOGW("failed(%d) to bind rtp socket(%d) to network(%llu)",
+                    result, *rtpSocket, (unsigned long long)socketNetwork);
+        }
+        result = android_setsocknetwork((net_handle_t)socketNetwork, *rtcpSocket);
+        if (result != 0) {
+            ALOGW("failed(%d) to bind rtcp socket(%d) to network(%llu)",
+                    result, *rtcpSocket, (unsigned long long)socketNetwork);
+        }
+    }
+
+    bumpSocketBufferSize(*rtcpSocket);
+
+    struct sockaddr *addr;
+    struct sockaddr_in addr4;
+    struct sockaddr_in6 addr6;
+
+    if (isIPv6) {
+        addr = (struct sockaddr *)&addr6;
+        memset(&addr6, 0, sizeof(addr6));
+        addr6.sin6_family = AF_INET6;
+        inet_pton(AF_INET6, localIp, &addr6.sin6_addr);
+        addr6.sin6_port = htons((uint16_t)localPort);
+    } else {
+        addr = (struct sockaddr *)&addr4;
+        memset(&addr4, 0, sizeof(addr4));
+        addr4.sin_family = AF_INET;
+        addr4.sin_addr.s_addr = inet_addr(localIp);
+        addr4.sin_port = htons((uint16_t)localPort);
+    }
+
+    int sockopt = 1;
+    setsockopt(*rtpSocket, SOL_SOCKET, SO_REUSEADDR, (int *)&sockopt, sizeof(sockopt));
+    setsockopt(*rtcpSocket, SOL_SOCKET, SO_REUSEADDR, (int *)&sockopt, sizeof(sockopt));
+
+    int sizeSockSt = isIPv6 ? sizeof(addr6) : sizeof(addr4);
+
+    if (bind(*rtpSocket, addr, sizeSockSt) == 0) {
+        ALOGI("rtp socket successfully binded. addr=%s:%d", localIp, localPort);
+    } else {
+        ALOGE("failed to bind rtp socket addr=%s:%d err=%s", localIp, localPort, strerror(errno));
+        return;
+    }
+
+    if (isIPv6)
+        addr6.sin6_port = htons(localPort + 1);
+    else
+        addr4.sin_port = htons(localPort + 1);
+
+    if (bind(*rtcpSocket, addr, sizeSockSt) == 0) {
+        ALOGI("rtcp socket successfully binded. addr=%s:%d", localIp, localPort + 1);
+    } else {
+        ALOGE("failed to bind rtcp socket addr=%s:%d err=%s", localIp,
+                localPort + 1, strerror(errno));
+    }
+
+    // Re uses addr variable as remote addr.
+    if (isIPv6) {
+        memset(&addr6, 0, sizeof(addr6));
+        addr6.sin6_family = AF_INET6;
+        inet_pton(AF_INET6, remoteIp, &addr6.sin6_addr);
+        addr6.sin6_port = htons((uint16_t)remotePort);
+    } else {
+        memset(&addr4, 0, sizeof(addr4));
+        addr4.sin_family = AF_INET;
+        addr4.sin_addr.s_addr = inet_addr(remoteIp);
+        addr4.sin_port = htons((uint16_t)remotePort);
+    }
+    if (connect(*rtpSocket, addr, sizeSockSt) == 0) {
+        ALOGI("rtp socket successfully connected to remote=%s:%d", remoteIp, remotePort);
+    } else {
+        ALOGE("failed to connect rtp socket to remote addr=%s:%d err=%s", remoteIp,
+                remotePort, strerror(errno));
+        return;
+    }
+
+    if (isIPv6)
+        addr6.sin6_port = htons(remotePort + 1);
+    else
+        addr4.sin_port = htons(remotePort + 1);
+
+    if (connect(*rtcpSocket, addr, sizeSockSt) == 0) {
+        ALOGI("rtcp socket successfully connected to remote=%s:%d", remoteIp, remotePort + 1);
+    } else {
+        ALOGE("failed to connect rtcp socket addr=%s:%d err=%s", remoteIp,
+                remotePort + 1, strerror(errno));
+        return;
+    }
+}
+
 void ARTPConnection::onMessageReceived(const sp<AMessage> &msg) {
     switch (msg->what()) {
         case kWhatAddStream:
@@ -204,6 +323,19 @@
     info->mNumRTCPPacketsReceived = 0;
     info->mNumRTPPacketsReceived = 0;
     memset(&info->mRemoteRTCPAddr, 0, sizeof(info->mRemoteRTCPAddr));
+    memset(&info->mRemoteRTCPAddr6, 0, sizeof(info->mRemoteRTCPAddr6));
+
+    sp<ASessionDescription> sessionDesc = info->mSessionDesc;
+    info->mCVOExtMap = 0;
+    for (size_t i = 1; i < sessionDesc->countTracks(); ++i) {
+        int32_t cvoExtMap;
+        if (sessionDesc->getCvoExtMap(i, &cvoExtMap)) {
+            info->mCVOExtMap = cvoExtMap;
+            ALOGI("urn:3gpp:video-orientation(cvo) found as extmap:%d", info->mCVOExtMap);
+        } else {
+            ALOGI("urn:3gpp:video-orientation(cvo) not found :%d", info->mCVOExtMap);
+        }
+    }
 
     if (!injected) {
         postPollEvent();
@@ -295,6 +427,12 @@
 
             if (err == -ECONNRESET) {
                 // socket failure, this stream is dead, Jim.
+                sp<AMessage> notify = it->mNotifyMsg->dup();
+                notify->setInt32("rtcp-event", 1);
+                notify->setInt32("payload-type", 400);
+                notify->setInt32("feedback-type", 1);
+                notify->setInt32("sender", it->mSources.valueAt(0)->getSelfID());
+                notify->post();
 
                 ALOGW("failed to receive RTP/RTCP datagram.");
                 it = mStreams.erase(it);
@@ -306,6 +444,8 @@
     }
 
     int64_t nowUs = ALooper::GetNowUs();
+    checkRxBitrate(nowUs);
+
     if (mLastReceiverReportTimeUs <= 0
             || mLastReceiverReportTimeUs + 5000000LL <= nowUs) {
         sp<ABuffer> buffer = new ABuffer(kMaxUDPSize);
@@ -340,13 +480,7 @@
             if (buffer->size() > 0) {
                 ALOGV("Sending RR...");
 
-                ssize_t n;
-                do {
-                    n = sendto(
-                        s->mRTCPSocket, buffer->data(), buffer->size(), 0,
-                        (const struct sockaddr *)&s->mRemoteRTCPAddr,
-                        sizeof(s->mRemoteRTCPAddr));
-                } while (n < 0 && errno == EINTR);
+                ssize_t n = send(s, buffer);
 
                 if (n <= 0) {
                     ALOGW("failed to send RTCP receiver report (%s).",
@@ -377,9 +511,21 @@
 
     sp<ABuffer> buffer = new ABuffer(65536);
 
+    struct sockaddr *pRemoteRTCPAddr;
+    int sizeSockSt;
+    if (s->isIPv6) {
+        pRemoteRTCPAddr = (struct sockaddr *)&s->mRemoteRTCPAddr6;
+        sizeSockSt = sizeof(struct sockaddr_in6);
+    } else {
+        pRemoteRTCPAddr = (struct sockaddr *)&s->mRemoteRTCPAddr;
+        sizeSockSt = sizeof(struct sockaddr_in);
+    }
     socklen_t remoteAddrLen =
         (!receiveRTP && s->mNumRTCPPacketsReceived == 0)
-            ? sizeof(s->mRemoteRTCPAddr) : 0;
+            ? sizeSockSt : 0;
+
+    if (mFlags & kViLTEConnection)
+        remoteAddrLen = 0;
 
     ssize_t nbytes;
     do {
@@ -388,8 +534,9 @@
             buffer->data(),
             buffer->capacity(),
             0,
-            remoteAddrLen > 0 ? (struct sockaddr *)&s->mRemoteRTCPAddr : NULL,
+            remoteAddrLen > 0 ? pRemoteRTCPAddr : NULL,
             remoteAddrLen > 0 ? &remoteAddrLen : NULL);
+        mCumulativeBytes += nbytes;
     } while (nbytes < 0 && errno == EINTR);
 
     if (nbytes <= 0) {
@@ -410,6 +557,36 @@
     return err;
 }
 
+ssize_t ARTPConnection::send(const StreamInfo *info, const sp<ABuffer> buffer) {
+        struct sockaddr* pRemoteRTCPAddr;
+        int sizeSockSt;
+
+        /* It seems this isIPv6 variable is useless.
+         * We should remove it to prevent confusion */
+        if (info->isIPv6) {
+            pRemoteRTCPAddr = (struct sockaddr *)&info->mRemoteRTCPAddr6;
+            sizeSockSt = sizeof(struct sockaddr_in6);
+        } else {
+            pRemoteRTCPAddr = (struct sockaddr *)&info->mRemoteRTCPAddr;
+            sizeSockSt = sizeof(struct sockaddr_in);
+        }
+
+        if (mFlags & kViLTEConnection) {
+            ALOGV("ViLTE RTCP");
+            pRemoteRTCPAddr = NULL;
+            sizeSockSt = 0;
+        }
+
+        ssize_t n;
+        do {
+            n = sendto(
+                    info->mRTCPSocket, buffer->data(), buffer->size(), 0,
+                    pRemoteRTCPAddr, sizeSockSt);
+        } while (n < 0 && errno == EINTR);
+
+        return n;
+}
+
 status_t ARTPConnection::parseRTP(StreamInfo *s, const sp<ABuffer> &buffer) {
     if (s->mNumRTPPacketsReceived++ == 0) {
         sp<AMessage> notify = s->mNotifyMsg->dup();
@@ -431,6 +608,11 @@
         return -1;
     }
 
+    if ((data[1] & 0x7f) == 20 /* decimal */) {
+        // Unassigned payload type
+        return -1;
+    }
+
     if (data[0] & 0x20) {
         // Padding present.
 
@@ -454,6 +636,7 @@
         return -1;
     }
 
+    int32_t cvoDegrees = -1;
     if (data[0] & 0x10) {
         // Header eXtension present.
 
@@ -473,6 +656,7 @@
             return -1;
         }
 
+        parseRTPExt(s, (const uint8_t *)extensionData, extensionLength, &cvoDegrees);
         payloadOffset += 4 + extensionLength;
     }
 
@@ -487,6 +671,8 @@
     meta->setInt32("rtp-time", rtpTime);
     meta->setInt32("PT", data[1] & 0x7f);
     meta->setInt32("M", data[1] >> 7);
+    if (cvoDegrees >= 0)
+        meta->setInt32("cvo", cvoDegrees);
 
     buffer->setInt32Data(u16at(&data[2]));
     buffer->setRange(payloadOffset, size - payloadOffset);
@@ -496,11 +682,65 @@
     return OK;
 }
 
+status_t ARTPConnection::parseRTPExt(StreamInfo *s,
+        const uint8_t *extHeader, size_t extLen, int32_t *cvoDegrees) {
+    if (extLen < 4)
+        return -1;
+
+    uint16_t header = (extHeader[0] << 8) | (extHeader[1]);
+    bool isOnebyteHeader = false;
+
+    if (header == 0xBEDE) {
+        isOnebyteHeader = true;
+    } else if (header == 0x1000) {
+        ALOGW("parseRTPExt: two-byte header is not implemented yet");
+        return -1;
+    } else {
+        ALOGW("parseRTPExt: can not recognize header");
+        return -1;
+    }
+
+    const uint8_t *extPayload = extHeader + 4;
+    extLen -= 4;
+    size_t offset = 0; //start from first payload of rtp extension.
+    // one-byte header parser
+    while (isOnebyteHeader && offset < extLen) {
+        uint8_t extmapId = extPayload[offset] >> 4;
+        uint8_t length = (extPayload[offset] & 0xF) + 1;
+        offset++;
+
+        // padding case
+        if (extmapId == 0)
+            continue;
+
+        uint8_t data[16]; // maximum length value
+        for (uint8_t j = 0; offset + j <= extLen && j < length; j++) {
+            data[j] = extPayload[offset + j];
+        }
+
+        offset += length;
+
+        if (extmapId == s->mCVOExtMap) {
+            *cvoDegrees = (int32_t)data[0];
+            return OK;
+        }
+    }
+
+    return BAD_VALUE;
+}
+
 status_t ARTPConnection::parseRTCP(StreamInfo *s, const sp<ABuffer> &buffer) {
     if (s->mNumRTCPPacketsReceived++ == 0) {
         sp<AMessage> notify = s->mNotifyMsg->dup();
         notify->setInt32("first-rtcp", true);
         notify->post();
+
+        ALOGI("send first-rtcp event to upper layer as ImsRxNotice");
+        sp<AMessage> imsNotify = s->mNotifyMsg->dup();
+        imsNotify->setInt32("rtcp-event", 1);
+        imsNotify->setInt32("payload-type", 101);
+        imsNotify->setInt32("feedback-type", 0);
+        imsNotify->post();
     }
 
     const uint8_t *data = buffer->data();
@@ -551,8 +791,12 @@
                 break;
 
             case 205:  // TSFB (transport layer specific feedback)
+                parseTSFB(s, data, headerLength);
+                break;
             case 206:  // PSFB (payload specific feedback)
                 // hexdump(data, headerLength);
+                parsePSFB(s, data, headerLength);
+                ALOGI("RTCP packet type %u of size %zu", (unsigned)data[1], headerLength);
                 break;
 
             case 203:
@@ -621,6 +865,144 @@
     return 0;
 }
 
+status_t ARTPConnection::parseTSFB(
+        StreamInfo *s, const uint8_t *data, size_t size) {
+    if (size < 12) {
+        // broken packet
+        return -1;
+    }
+
+    uint8_t msgType = data[0] & 0x1f;
+    uint32_t id = u32at(&data[4]);
+
+    const uint8_t *ptr = &data[12];
+    size -= 12;
+
+    using namespace std;
+    size_t FCISize;
+    switch(msgType) {
+        case 1:     // Generic NACK
+        {
+            FCISize = 4;
+            while (size >= FCISize) {
+                uint16_t PID = u16at(&ptr[0]);  // lost packet RTP number
+                uint16_t BLP = u16at(&ptr[2]);  // Bitmask of following Lost Packets
+
+                size -= FCISize;
+                ptr += FCISize;
+
+                AString list_of_losts;
+                list_of_losts.append(PID);
+                for (int i=0 ; i<16 ; i++) {
+                    bool is_lost = BLP & (0x1 << i);
+                    if (is_lost) {
+                        list_of_losts.append(", ");
+                        list_of_losts.append(PID + i);
+                    }
+                }
+                ALOGI("Opponent losts packet of RTP %s", list_of_losts.c_str());
+            }
+            break;
+        }
+        case 3:     // TMMBR
+        case 4:     // TMMBN
+        {
+            FCISize = 8;
+            while (size >= FCISize) {
+                uint32_t MxTBR = u32at(&ptr[4]);
+                uint32_t MxTBRExp = MxTBR >> 26;
+                uint32_t MxTBRMantissa = (MxTBR >> 9) & 0x01FFFF;
+                uint32_t overhead = MxTBR & 0x01FF;
+
+                size -= FCISize;
+                ptr += FCISize;
+
+                uint32_t bitRate = (1 << MxTBRExp) * MxTBRMantissa;
+
+                if (msgType == 3)
+                    ALOGI("Op -> UE Req Tx bitrate : %d X 2^%d = %d",
+                        MxTBRMantissa, MxTBRExp, bitRate);
+                else if (msgType == 4)
+                    ALOGI("OP -> UE Noti Rx bitrate : %d X 2^%d = %d",
+                        MxTBRMantissa, MxTBRExp, bitRate);
+
+                sp<AMessage> notify = s->mNotifyMsg->dup();
+                notify->setInt32("rtcp-event", 1);
+                notify->setInt32("payload-type", 205);
+                notify->setInt32("feedback-type", msgType);
+                notify->setInt32("sender", id);
+                notify->setInt32("bit-rate", bitRate);
+                notify->post();
+                ALOGI("overhead : %d", overhead);
+            }
+            break;
+        }
+        default:
+        {
+            ALOGI("Not supported TSFB type %d", msgType);
+            break;
+        }
+    }
+
+    return 0;
+}
+
+status_t ARTPConnection::parsePSFB(
+        StreamInfo *s, const uint8_t *data, size_t size) {
+    if (size < 12) {
+        // broken packet
+        return -1;
+    }
+
+    uint8_t msgType = data[0] & 0x1f;
+    uint32_t id = u32at(&data[4]);
+
+    const uint8_t *ptr = &data[12];
+    size -= 12;
+
+    using namespace std;
+    switch(msgType) {
+        case 1:     // Picture Loss Indication (PLI)
+        {
+            if (size > 0) {
+                // PLI does not need parameters
+                break;
+            };
+            sp<AMessage> notify = s->mNotifyMsg->dup();
+            notify->setInt32("rtcp-event", 1);
+            notify->setInt32("payload-type", 206);
+            notify->setInt32("feedback-type", msgType);
+            notify->setInt32("sender", id);
+            notify->post();
+            ALOGI("PLI detected.");
+            break;
+        }
+        case 4:     // Full Intra Request (FIR)
+        {
+            if (size < 4) {
+                break;
+            }
+            uint32_t requestedId = u32at(&ptr[0]);
+            if (requestedId == (uint32_t)mSelfID) {
+                sp<AMessage> notify = s->mNotifyMsg->dup();
+                notify->setInt32("rtcp-event", 1);
+                notify->setInt32("payload-type", 206);
+                notify->setInt32("feedback-type", msgType);
+                notify->setInt32("sender", id);
+                notify->post();
+                ALOGI("FIR detected.");
+            }
+            break;
+        }
+        default:
+        {
+            ALOGI("Not supported PSFB type %d", msgType);
+            break;
+        }
+    }
+
+    return 0;
+}
 sp<ARTPSource> ARTPConnection::findSource(StreamInfo *info, uint32_t srcId) {
     sp<ARTPSource> source;
     ssize_t index = info->mSources.indexOfKey(srcId);
@@ -630,6 +1012,8 @@
         source = new ARTPSource(
                 srcId, info->mSessionDesc, info->mIndex, info->mNotifyMsg);
 
+        source->setSelfID(mSelfID);
+        source->setMinMaxBitrate(mMinBitrate, mMaxBitrate);
         info->mSources.add(srcId, source);
     } else {
         source = info->mSources.valueAt(index);
@@ -645,6 +1029,78 @@
     msg->post();
 }
 
+void ARTPConnection::setSelfID(const uint32_t selfID) {
+    mSelfID = selfID;
+}
+
+void ARTPConnection::setMinMaxBitrate(int32_t min, int32_t max) {
+    mMinBitrate = min;
+    mMaxBitrate = max;
+}
+
+void ARTPConnection::checkRxBitrate(int64_t nowUs) {
+    if (mLastBitrateReportTimeUs <= 0) {
+        mCumulativeBytes = 0;
+        mLastBitrateReportTimeUs = nowUs;
+    }
+    else if (mLastBitrateReportTimeUs + 1000000ll <= nowUs) {
+        int32_t timeDiff = (nowUs - mLastBitrateReportTimeUs) / 1000000ll;
+        int32_t bitrate = mCumulativeBytes * 8 / timeDiff;
+        ALOGI("Actual Rx bitrate : %d bits/sec", bitrate);
+
+        sp<ABuffer> buffer = new ABuffer(kMaxUDPSize);
+        List<StreamInfo>::iterator it = mStreams.begin();
+        while (it != mStreams.end()) {
+            StreamInfo *s = &*it;
+            if (s->mIsInjected) {
+                ++it;
+                continue;
+            }
+
+            if (s->mNumRTCPPacketsReceived == 0) {
+                // We have never received any RTCP packets on this stream,
+                // we don't even know where to send a report.
+                ++it;
+                continue;
+            }
+
+            buffer->setRange(0, 0);
+
+            for (size_t i = 0; i < s->mSources.size(); ++i) {
+                sp<ARTPSource> source = s->mSources.valueAt(i);
+                source->setBitrateData(bitrate, nowUs);
+                source->setTargetBitrate();
+                source->addTMMBR(buffer);
+                if (source->isNeedToDowngrade()) {
+                    sp<AMessage> notify = s->mNotifyMsg->dup();
+                    notify->setInt32("rtcp-event", 1);
+                    notify->setInt32("payload-type", 400);
+                    notify->setInt32("feedback-type", 1);
+                    notify->setInt32("sender", source->getSelfID());
+                    notify->post();
+                }
+            }
+            if (buffer->size() > 0) {
+                ALOGV("Sending TMMBR...");
+
+                ssize_t n = send(s, buffer);
+
+                if (n <= 0) {
+                    ALOGW("failed to send RTCP TMMBR (%s).",
+                         n == 0 ? "connection gone" : strerror(errno));
+
+                    it = mStreams.erase(it);
+                    continue;
+                }
+
+                CHECK_EQ(n, (ssize_t)buffer->size());
+            }
+            ++it;
+        }
+        mCumulativeBytes = 0;
+        mLastBitrateReportTimeUs = nowUs;
+    }
+}
 void ARTPConnection::onInjectPacket(const sp<AMessage> &msg) {
     int32_t index;
     CHECK(msg->findInt32("index", &index));
@@ -672,4 +1128,3 @@
 }
 
 }  // namespace android
-
diff --git a/media/libstagefright/rtsp/ARTPConnection.h b/media/libstagefright/rtsp/ARTPConnection.h
index d5f7c2e..712eec5 100644
--- a/media/libstagefright/rtsp/ARTPConnection.h
+++ b/media/libstagefright/rtsp/ARTPConnection.h
@@ -30,6 +30,7 @@
 struct ARTPConnection : public AHandler {
     enum Flags {
         kRegularlyRequestFIR = 2,
+        kViLTEConnection = 4,
     };
 
     explicit ARTPConnection(uint32_t flags = 0);
@@ -44,11 +45,21 @@
 
     void injectPacket(int index, const sp<ABuffer> &buffer);
 
+    void setSelfID(const uint32_t selfID);
+    void setMinMaxBitrate(int32_t min, int32_t max);
+
     // Creates a pair of UDP datagram sockets bound to adjacent ports
     // (the rtpSocket is bound to an even port, the rtcpSocket to the
     // next higher port).
     static void MakePortPair(
             int *rtpSocket, int *rtcpSocket, unsigned *rtpPort);
+    // Creates a pair of UDP datagram sockets bound to assigned ip and
+    // ports (the rtpSocket is bound to an even port, the rtcpSocket
+    // to the next higher port).
+    static void MakeRTPSocketPair(
+            int *rtpSocket, int *rtcpSocket,
+            const char *localIp, const char *remoteIp,
+            unsigned localPort, unsigned remotePort, int64_t socketNetwork = 0);
 
 protected:
     virtual ~ARTPConnection();
@@ -71,18 +82,30 @@
 
     bool mPollEventPending;
     int64_t mLastReceiverReportTimeUs;
+    int64_t mLastBitrateReportTimeUs;
+
+    int32_t mSelfID;
+
+    int32_t mMinBitrate;
+    int32_t mMaxBitrate;
+    int32_t mCumulativeBytes;
 
     void onAddStream(const sp<AMessage> &msg);
     void onRemoveStream(const sp<AMessage> &msg);
     void onPollStreams();
     void onInjectPacket(const sp<AMessage> &msg);
     void onSendReceiverReports();
+    void checkRxBitrate(int64_t nowUs);
 
     status_t receive(StreamInfo *info, bool receiveRTP);
+    ssize_t send(const StreamInfo *info, const sp<ABuffer> buffer);
 
     status_t parseRTP(StreamInfo *info, const sp<ABuffer> &buffer);
+    status_t parseRTPExt(StreamInfo *s, const uint8_t *extData, size_t extLen, int32_t *cvoDegrees);
     status_t parseRTCP(StreamInfo *info, const sp<ABuffer> &buffer);
     status_t parseSR(StreamInfo *info, const uint8_t *data, size_t size);
+    status_t parseTSFB(StreamInfo *info, const uint8_t *data, size_t size);
+    status_t parsePSFB(StreamInfo *info, const uint8_t *data, size_t size);
     status_t parseBYE(StreamInfo *info, const uint8_t *data, size_t size);
 
     sp<ARTPSource> findSource(StreamInfo *info, uint32_t id);
diff --git a/media/libstagefright/rtsp/ARTPSource.cpp b/media/libstagefright/rtsp/ARTPSource.cpp
index f5f8128..bbe9d94 100644
--- a/media/libstagefright/rtsp/ARTPSource.cpp
+++ b/media/libstagefright/rtsp/ARTPSource.cpp
@@ -22,6 +22,7 @@
 
 #include "AAMRAssembler.h"
 #include "AAVCAssembler.h"
+#include "AHEVCAssembler.h"
 #include "AH263Assembler.h"
 #include "AMPEG2TSAssembler.h"
 #include "AMPEG4AudioAssembler.h"
@@ -35,13 +36,17 @@
 
 namespace android {
 
-static const uint32_t kSourceID = 0xdeadbeef;
+static uint32_t kSourceID = 0xdeadbeef;
 
 ARTPSource::ARTPSource(
         uint32_t id,
         const sp<ASessionDescription> &sessionDesc, size_t index,
         const sp<AMessage> &notify)
-    : mID(id),
+    : mFirstSeqNumber(0),
+      mFirstRtpTime(0),
+      mFirstSysTime(0),
+      mClockRate(0),
+      mID(id),
       mHighestSeqNumber(0),
       mPrevExpected(0),
       mBaseSeqNumber(0),
@@ -61,6 +66,9 @@
     if (!strncmp(desc.c_str(), "H264/", 5)) {
         mAssembler = new AAVCAssembler(notify);
         mIssueFIRRequests = true;
+    } else if (!strncmp(desc.c_str(), "H265/", 5)) {
+        mAssembler = new AHEVCAssembler(notify);
+        mIssueFIRRequests = true;
     } else if (!strncmp(desc.c_str(), "MP4A-LATM/", 10)) {
         mAssembler = new AMPEG4AudioAssembler(notify, params);
     } else if (!strncmp(desc.c_str(), "H263-1998/", 10)
@@ -112,9 +120,16 @@
 bool ARTPSource::queuePacket(const sp<ABuffer> &buffer) {
     uint32_t seqNum = (uint32_t)buffer->int32Data();
 
-    if (mNumBuffersReceived++ == 0) {
+    if (mNumBuffersReceived++ == 0 && mFirstSysTime == 0) {
+        int32_t firstRtpTime;
+        CHECK(buffer->meta()->findInt32("rtp-time", &firstRtpTime));
+        mFirstSysTime = ALooper::GetNowUs();
         mHighestSeqNumber = seqNum;
         mBaseSeqNumber = seqNum;
+        mFirstRtpTime = firstRtpTime;
+        ALOGV("first-rtp arrived: first-rtp-time=%d, sys-time=%lld, seq-num=%u",
+                mFirstRtpTime, (long long)mFirstSysTime, mHighestSeqNumber);
+        mClockRate = 90000;
         mQueue.push_back(buffer);
         return true;
     }
@@ -306,6 +321,97 @@
     buffer->setRange(buffer->offset(), buffer->size() + 32);
 }
 
+void ARTPSource::addTMMBR(const sp<ABuffer> &buffer) {
+    if (buffer->size() + 20 > buffer->capacity()) {
+        ALOGW("RTCP buffer too small to accommodate RR.");
+        return;
+    }
+
+    int32_t targetBitrate = mQualManager.getTargetBitrate();
+    if (targetBitrate <= 0)
+        return;
+
+    uint8_t *data = buffer->data() + buffer->size();
+
+    data[0] = 0x80 | 3; // TMMBR
+    data[1] = 205;      // TSFB
+    data[2] = 0;
+    data[3] = 4;        // total (4+1) * sizeof(int32_t) = 20 bytes
+    data[4] = kSourceID >> 24;
+    data[5] = (kSourceID >> 16) & 0xff;
+    data[6] = (kSourceID >> 8) & 0xff;
+    data[7] = kSourceID & 0xff;
+
+    *(int32_t*)(&data[8]) = 0;  // 4 bytes blank
+
+    data[12] = mID >> 24;
+    data[13] = (mID >> 16) & 0xff;
+    data[14] = (mID >> 8) & 0xff;
+    data[15] = mID & 0xff;
+
+    int32_t exp, mantissa;
+
+    // Round off to the nearest 2^4th
+    ALOGI("UE -> Op Req Rx bitrate : %d ", targetBitrate & 0xfffffff0);
+    for (exp=4 ; exp < 32 ; exp++)
+        if (((targetBitrate >> exp) & 0x01) != 0)
+            break;
+    mantissa = targetBitrate >> exp;
+
+    data[16] = ((exp << 2) & 0xfc) | ((mantissa & 0x18000) >> 15);
+    data[17] =                        (mantissa & 0x07f80) >> 7;
+    data[18] =                        (mantissa & 0x0007f) << 1;
+    data[19] = 40;              // 40 bytes overhead;
+
+    buffer->setRange(buffer->offset(), buffer->size() + 20);
+}
+
+uint32_t ARTPSource::getSelfID() {
+    return kSourceID;
+}
+void ARTPSource::setSelfID(const uint32_t selfID) {
+    kSourceID = selfID;
+}
+
+void ARTPSource::setMinMaxBitrate(int32_t min, int32_t max) {
+    mQualManager.setMinMaxBitrate(min, max);
+}
+
+void ARTPSource::setBitrateData(int32_t bitrate, int64_t time) {
+    mQualManager.setBitrateData(bitrate, time);
+}
+
+void ARTPSource::setTargetBitrate() {
+    uint8_t fraction = 0;
+
+    // According to appendix A.3 in RFC 3550
+    uint32_t expected = mHighestSeqNumber - mBaseSeqNumber + 1;
+    int64_t intervalExpected = expected - mPrevExpected;
+    int64_t intervalReceived = mNumBuffersReceived - mPrevNumBuffersReceived;
+    int64_t intervalPacketLost = intervalExpected - intervalReceived;
+
+    ALOGI("UID %p expectedPkts %lld lostPkts %lld", this, (long long)intervalExpected, (long long)intervalPacketLost);
+
+    if (intervalPacketLost < 0 || intervalExpected == 0)
+        fraction = 0;
+    else if (intervalExpected <= intervalPacketLost)
+        fraction = 255;
+    else
+        fraction = (intervalPacketLost << 8) / intervalExpected;
+
+    mQualManager.setTargetBitrate(fraction, ALooper::GetNowUs(), intervalExpected < 5);
+}
+
+bool ARTPSource::isNeedToReport() {
+    int64_t intervalReceived = mNumBuffersReceived - mPrevNumBuffersReceived;
+    return (intervalReceived > 0) ? true : false;
+}
+
+bool ARTPSource::isNeedToDowngrade() {
+    return mQualManager.isNeedToDowngrade();
+}
+
+void ARTPSource::noticeAbandonBuffer(int cnt) {
+    mNumBuffersReceived -= cnt;
+}
 }  // namespace android
-
-
diff --git a/media/libstagefright/rtsp/ARTPSource.h b/media/libstagefright/rtsp/ARTPSource.h
index f44e83f..652e753 100644
--- a/media/libstagefright/rtsp/ARTPSource.h
+++ b/media/libstagefright/rtsp/ARTPSource.h
@@ -23,6 +23,7 @@
 #include <media/stagefright/foundation/ABase.h>
 #include <utils/List.h>
 #include <utils/RefBase.h>
+#include <QualManager.h>
 
 namespace android {
 
@@ -45,8 +46,25 @@
 
     void addReceiverReport(const sp<ABuffer> &buffer);
     void addFIR(const sp<ABuffer> &buffer);
+    void addTMMBR(const sp<ABuffer> &buffer);
+    uint32_t getSelfID();
+    void setSelfID(const uint32_t selfID);
+    void setMinMaxBitrate(int32_t min, int32_t max);
+    void setBitrateData(int32_t bitrate, int64_t time);
+    void setTargetBitrate();
+
+    bool isNeedToReport();
+    bool isNeedToDowngrade();
+
+    void noticeAbandonBuffer(int cnt=1);
+
+    int32_t mFirstSeqNumber;
+    int32_t mFirstRtpTime;
+    int64_t mFirstSysTime;
+    int32_t mClockRate;
 
 private:
+
     uint32_t mID;
     uint32_t mHighestSeqNumber;
     uint32_t mPrevExpected;
@@ -66,6 +84,8 @@
 
     sp<AMessage> mNotify;
 
+    QualManager mQualManager;
+
     bool queuePacket(const sp<ABuffer> &buffer);
 
     DISALLOW_EVIL_CONSTRUCTORS(ARTPSource);
diff --git a/media/libstagefright/rtsp/ARTPWriter.cpp b/media/libstagefright/rtsp/ARTPWriter.cpp
index 58d6086..70d34de 100644
--- a/media/libstagefright/rtsp/ARTPWriter.cpp
+++ b/media/libstagefright/rtsp/ARTPWriter.cpp
@@ -35,10 +35,29 @@
 #define PT      97
 #define PT_STR  "97"
 
+#define H264_NALU_MASK 0x1F
+#define H264_NALU_SPS 0x7
+#define H264_NALU_PPS 0x8
+#define H264_NALU_IFRAME 0x5
+#define H264_NALU_PFRAME 0x1
+
+#define H265_NALU_MASK 0x3F
+#define H265_NALU_VPS 0x40
+#define H265_NALU_SPS 0x42
+#define H265_NALU_PPS 0x44
+
+#define UDP_HEADER_SIZE 8
+#define RTP_HEADER_SIZE 12
+#define RTP_HEADER_EXT_SIZE 1
+#define RTP_FU_HEADER_SIZE 2
+#define RTP_PAYLOAD_ROOM_SIZE 140
+
+
 namespace android {
 
 // static const size_t kMaxPacketSize = 65507;  // maximum payload in UDP over IP
 static const size_t kMaxPacketSize = 1500;
+static char kCNAME[255] = "someone@somewhere";
 
 static int UniformRand(int limit) {
     return ((double)rand() * limit) / RAND_MAX;
@@ -50,13 +69,16 @@
       mLooper(new ALooper),
       mReflector(new AHandlerReflector<ARTPWriter>(this)) {
     CHECK_GE(fd, 0);
+    mIsIPv6 = false;
 
     mLooper->setName("rtp writer");
     mLooper->registerHandler(mReflector);
     mLooper->start();
 
-    mSocket = socket(AF_INET, SOCK_DGRAM, 0);
-    CHECK_GE(mSocket, 0);
+    mRTPSocket = socket(AF_INET, SOCK_DGRAM, 0);
+    CHECK_GE(mRTPSocket, 0);
+    mRTCPSocket = socket(AF_INET, SOCK_DGRAM, 0);
+    CHECK_GE(mRTCPSocket, 0);
 
     memset(mRTPAddr.sin_zero, 0, sizeof(mRTPAddr.sin_zero));
     mRTPAddr.sin_family = AF_INET;
@@ -72,6 +94,42 @@
 
     mRTCPAddr = mRTPAddr;
     mRTCPAddr.sin_port = htons(ntohs(mRTPAddr.sin_port) | 1);
+    mSPSBuf = NULL;
+    mPPSBuf = NULL;
+
+#if LOG_TO_FILES
+    mRTPFd = open(
+            "/data/misc/rtpout.bin",
+            O_WRONLY | O_CREAT | O_TRUNC,
+            0644);
+    CHECK_GE(mRTPFd, 0);
+
+    mRTCPFd = open(
+            "/data/misc/rtcpout.bin",
+            O_WRONLY | O_CREAT | O_TRUNC,
+            0644);
+    CHECK_GE(mRTCPFd, 0);
+#endif
+}
+
+ARTPWriter::ARTPWriter(int fd, String8& localIp, int localPort, String8& remoteIp,
+    int remotePort, uint32_t seqNo)
+    : mFlags(0),
+      mFd(dup(fd)),
+      mLooper(new ALooper),
+      mReflector(new AHandlerReflector<ARTPWriter>(this)) {
+    CHECK_GE(fd, 0);
+    mIsIPv6 = false;
+
+    mLooper->setName("rtp writer");
+    mLooper->registerHandler(mReflector);
+    mLooper->start();
+
+    makeSocketPairAndBind(localIp, localPort, remoteIp , remotePort);
+    mSPSBuf = NULL;
+    mPPSBuf = NULL;
+
+    mSeqNo = seqNo;
 
 #if LOG_TO_FILES
     mRTPFd = open(
@@ -89,6 +147,16 @@
 }
 
 ARTPWriter::~ARTPWriter() {
+    if (mSPSBuf != NULL) {
+        mSPSBuf->release();
+        mSPSBuf = NULL;
+    }
+
+    if (mPPSBuf != NULL) {
+        mPPSBuf->release();
+        mPPSBuf = NULL;
+    }
+
 #if LOG_TO_FILES
     close(mRTCPFd);
     mRTCPFd = -1;
@@ -97,8 +165,11 @@
     mRTPFd = -1;
 #endif
 
-    close(mSocket);
-    mSocket = -1;
+    close(mRTPSocket);
+    mRTPSocket = -1;
+
+    close(mRTCPSocket);
+    mRTCPSocket = -1;
 
     close(mFd);
     mFd = -1;
@@ -114,28 +185,61 @@
     return (mFlags & kFlagEOS) != 0;
 }
 
-status_t ARTPWriter::start(MetaData * /* params */) {
+status_t ARTPWriter::start(MetaData * params) {
     Mutex::Autolock autoLock(mLock);
     if (mFlags & kFlagStarted) {
         return INVALID_OPERATION;
     }
 
     mFlags &= ~kFlagEOS;
-    mSourceID = rand();
-    mSeqNo = UniformRand(65536);
-    mRTPTimeBase = rand();
+    if (mSourceID == 0)
+        mSourceID = rand();
+    if (mSeqNo == 0)
+        mSeqNo = UniformRand(65536);
+    mRTPTimeBase = 0;
     mNumRTPSent = 0;
     mNumRTPOctetsSent = 0;
     mLastRTPTime = 0;
     mLastNTPTime = 0;
+    mOpponentID = 0;
+    mBitrate = 192000;
     mNumSRsSent = 0;
+    mRTPCVOExtMap = -1;
+    mRTPCVODegrees = 0;
+    mRTPSockNetwork = 0;
 
     const char *mime;
     CHECK(mSource->getFormat()->findCString(kKeyMIMEType, &mime));
 
+    int32_t selfID = 0;
+    if (params->findInt32(kKeySelfID, &selfID))
+        mSourceID = selfID;
+
+    int32_t payloadType = 0;
+    if (params->findInt32(kKeyPayloadType, &payloadType))
+        mPayloadType = payloadType;
+
+    int32_t rtpExtMap = 0;
+    if (params->findInt32(kKeyRtpExtMap, &rtpExtMap))
+        mRTPCVOExtMap = rtpExtMap;
+
+    int32_t rtpCVODegrees = 0;
+    if (params->findInt32(kKeyRtpCvoDegrees, &rtpCVODegrees))
+        mRTPCVODegrees = rtpCVODegrees;
+
+    int32_t dscp = 0;
+    if (params->findInt32(kKeyRtpDscp, &dscp))
+        updateSocketDscp(dscp);
+
+    int64_t sockNetwork = 0;
+    if (params->findInt64(kKeySocketNetwork, &sockNetwork))
+        updateSocketNetwork(sockNetwork);
+
     mMode = INVALID;
     if (!strcasecmp(mime, MEDIA_MIMETYPE_VIDEO_AVC)) {
         mMode = H264;
+    } else if (!strcasecmp(mime, MEDIA_MIMETYPE_VIDEO_HEVC)) {
+        mMode = H265;
     } else if (!strcasecmp(mime, MEDIA_MIMETYPE_VIDEO_H263)) {
         mMode = H263;
     } else if (!strcasecmp(mime, MEDIA_MIMETYPE_AUDIO_AMR_NB)) {
@@ -173,9 +277,12 @@
     return OK;
 }
 
-static void StripStartcode(MediaBufferBase *buffer) {
+// return size of SPS if there is more NAL unit found following to SPS.
+static uint32_t StripStartcode(MediaBufferBase *buffer) {
+    uint32_t nalSize = 0;
+
     if (buffer->range_length() < 4) {
-        return;
+        return 0;
     }
 
     const uint8_t *ptr =
@@ -185,13 +292,65 @@
         buffer->set_range(
                 buffer->range_offset() + 4, buffer->range_length() - 4);
     }
+
+    ptr = (const uint8_t *)buffer->data() + buffer->range_offset();
+
+    if (buffer->range_length() > 0 && (*ptr & H264_NALU_MASK) == H264_NALU_SPS) {
+        for (uint32_t i = 1; i + 4 <= buffer->range_length(); i++) {
+
+            if (!memcmp(ptr + i, "\x00\x00\x00\x01", 4)) {
+                // Now, we found one more NAL unit in the media buffer.
+                // Mostly, it will be a PPS.
+                nalSize = i;
+                ALOGV("SPS found. size=%d", nalSize);
+            }
+        }
+    }
+
+    return nalSize;
+}
+
+static void SpsPpsParser(MediaBufferBase *mediaBuffer,
+    MediaBufferBase **spsBuffer, MediaBufferBase **ppsBuffer, uint32_t spsSize) {
+
+    if (mediaBuffer == NULL || mediaBuffer->range_length() < 4)
+        return;
+
+    if ((*spsBuffer) != NULL) {
+        (*spsBuffer)->release();
+        (*spsBuffer) = NULL;
+    }
+
+    if ((*ppsBuffer) != NULL) {
+        (*ppsBuffer)->release();
+        (*ppsBuffer) = NULL;
+    }
+
+    // we got sps/pps but startcode of sps is striped.
+    (*spsBuffer) = MediaBufferBase::Create(spsSize);
+    memcpy((*spsBuffer)->data(),
+            (const uint8_t *)mediaBuffer->data() + mediaBuffer->range_offset(),
+            spsSize);
+
+    int32_t ppsSize = mediaBuffer->range_length() - spsSize - 4 /*startcode*/;
+    if (ppsSize > 0) {
+        (*ppsBuffer) = MediaBufferBase::Create(ppsSize);
+        ALOGV("PPS found. size=%d", (int)ppsSize);
+        mediaBuffer->set_range(mediaBuffer->range_offset() + spsSize + 4 /*startcode*/,
+                mediaBuffer->range_length() - spsSize - 4 /*startcode*/);
+        memcpy((*ppsBuffer)->data(),
+                (const uint8_t *)mediaBuffer->data() + mediaBuffer->range_offset(),
+                ppsSize);
+    }
 }
 
 void ARTPWriter::onMessageReceived(const sp<AMessage> &msg) {
     switch (msg->what()) {
         case kWhatStart:
         {
-            CHECK_EQ(mSource->start(), (status_t)OK);
+            sp<MetaData> meta = new MetaData();
+            meta->setInt64(kKeyTime, 10ll);
+            CHECK_EQ(mSource->start(meta.get()), (status_t)OK);
 
 #if 0
             if (mMode == H264) {
@@ -264,6 +423,18 @@
     }
 }
 
+void ARTPWriter::setTMMBNInfo(uint32_t opponentID, uint32_t bitrate) {
+    mOpponentID = opponentID;
+    mBitrate = bitrate;
+
+    sp<ABuffer> buffer = new ABuffer(65536);
+    buffer->setRange(0, 0);
+
+    addTMMBN(buffer);
+
+    send(buffer, true /* isRTCP */);
+}
+
 void ARTPWriter::onRead(const sp<AMessage> &msg) {
     MediaBufferBase *mediaBuf;
     status_t err = mSource->read(&mediaBuf);
@@ -280,8 +451,15 @@
         ALOGV("read buffer of size %zu", mediaBuf->range_length());
 
         if (mMode == H264) {
+            uint32_t spsSize = 0;
+            if ((spsSize = StripStartcode(mediaBuf)) > 0) {
+                SpsPpsParser(mediaBuf, &mSPSBuf, &mPPSBuf, spsSize);
+            } else {
+                sendAVCData(mediaBuf);
+            }
+        } else if (mMode == H265) {
             StripStartcode(mediaBuf);
-            sendAVCData(mediaBuf);
+            sendHEVCData(mediaBuf);
         } else if (mMode == H263) {
             sendH263Data(mediaBuf);
         } else if (mMode == AMR_NB || mMode == AMR_WB) {
@@ -309,12 +487,29 @@
 }
 
 void ARTPWriter::send(const sp<ABuffer> &buffer, bool isRTCP) {
-    ssize_t n = sendto(
-            mSocket, buffer->data(), buffer->size(), 0,
-            (const struct sockaddr *)(isRTCP ? &mRTCPAddr : &mRTPAddr),
-            sizeof(mRTCPAddr));
+    int sizeSockSt;
+    struct sockaddr *remAddr;
 
-    CHECK_EQ(n, (ssize_t)buffer->size());
+    if (mIsIPv6) {
+        sizeSockSt = sizeof(struct sockaddr_in6);
+        if (isRTCP)
+            remAddr = (struct sockaddr *)&mRTCPAddr6;
+        else
+            remAddr = (struct sockaddr *)&mRTPAddr6;
+    } else {
+        sizeSockSt = sizeof(struct sockaddr_in);
+        if (isRTCP)
+            remAddr = (struct sockaddr *)&mRTCPAddr;
+        else
+            remAddr = (struct sockaddr *)&mRTPAddr;
+    }
+
+    ssize_t n = sendto(isRTCP ? mRTCPSocket : mRTPSocket,
+            buffer->data(), buffer->size(), 0, remAddr, sizeSockSt);
+
+    if (n != (ssize_t)buffer->size()) {
+        ALOGW("packets can not be sent. ret=%d, buf=%d", (int)n, (int)buffer->size());
+    }
 
 #if LOG_TO_FILES
     int fd = isRTCP ? mRTCPFd : mRTPFd;
@@ -379,7 +574,6 @@
 
     data[offset++] = 1;  // CNAME
 
-    static const char *kCNAME = "someone@somewhere";
     data[offset++] = strlen(kCNAME);
 
     memcpy(&data[offset], kCNAME, strlen(kCNAME));
@@ -416,9 +610,52 @@
     buffer->setRange(buffer->offset(), buffer->size() + offset);
 }
 
+void ARTPWriter::addTMMBN(const sp<ABuffer> &buffer) {
+    if (buffer->size() + 20 > buffer->capacity()) {
+        ALOGW("RTCP buffer too small to accommodate SR.");
+        return;
+    }
+    if (mOpponentID == 0)
+        return;
+
+    uint8_t *data = buffer->data() + buffer->size();
+
+    data[0] = 0x80 | 4; // TMMBN
+    data[1] = 205;      // TSFB
+    data[2] = 0;
+    data[3] = 4;        // total (4+1) * sizeof(int32_t) = 20 bytes
+    data[4] = mSourceID >> 24;
+    data[5] = (mSourceID >> 16) & 0xff;
+    data[6] = (mSourceID >> 8) & 0xff;
+    data[7] = mSourceID & 0xff;
+
+    *(int32_t*)(&data[8]) = 0;  // 4 bytes blank
+
+    data[12] = mOpponentID >> 24;
+    data[13] = (mOpponentID >> 16) & 0xff;
+    data[14] = (mOpponentID >> 8) & 0xff;
+    data[15] = mOpponentID & 0xff;
+
+    int32_t exp, mantissa;
+
+    // Round off to the nearest 2^4th
+    ALOGI("UE -> Op Noti Tx bitrate : %d ", mBitrate & 0xfffffff0);
+    for (exp=4 ; exp < 32 ; exp++)
+        if (((mBitrate >> exp) & 0x01) != 0)
+            break;
+    mantissa = mBitrate >> exp;
+
+    data[16] = ((exp << 2) & 0xfc) | ((mantissa & 0x18000) >> 15);
+    data[17] =                        (mantissa & 0x07f80) >> 7;
+    data[18] =                        (mantissa & 0x0007f) << 1;
+    data[19] = 40;              // 40 bytes overhead;
+
+    buffer->setRange(buffer->offset(), buffer->size() + 20);
+}
+
 // static
 uint64_t ARTPWriter::GetNowNTP() {
-    uint64_t nowUs = ALooper::GetNowUs();
+    uint64_t nowUs = systemTime(SYSTEM_TIME_REALTIME) / 1000ll;
 
     nowUs += ((70LL * 365 + 17) * 24) * 60 * 60 * 1000000LL;
 
@@ -463,7 +700,7 @@
         sdp.append("m=audio ");
     }
 
-    sdp.append(AStringPrintf("%d", ntohs(mRTPAddr.sin_port)));
+    sdp.append(AStringPrintf("%d", mIsIPv6 ? ntohs(mRTPAddr6.sin6_port) : ntohs(mRTPAddr.sin_port)));
     sdp.append(
           " RTP/AVP " PT_STR "\r\n"
           "b=AS 320000\r\n"
@@ -569,24 +806,49 @@
     send(buffer, true /* isRTCP */);
 }
 
-void ARTPWriter::sendAVCData(MediaBufferBase *mediaBuf) {
+void ARTPWriter::sendSPSPPSIfIFrame(MediaBufferBase *mediaBuf, int64_t timeUs) {
+    const uint8_t *mediaData =
+        (const uint8_t *)mediaBuf->data() + mediaBuf->range_offset();
+
+    if (mediaBuf->range_length() == 0
+            || (mediaData[0] & H264_NALU_MASK) != H264_NALU_IFRAME)
+        return;
+
+    if (mSPSBuf != NULL) {
+        mSPSBuf->meta_data().setInt64(kKeyTime, timeUs);
+        mSPSBuf->meta_data().setInt32(kKeySps, 1);
+        sendAVCData(mSPSBuf);
+    }
+
+    if (mPPSBuf != NULL) {
+        mPPSBuf->meta_data().setInt64(kKeyTime, timeUs);
+        mPPSBuf->meta_data().setInt32(kKeyPps, 1);
+        sendAVCData(mPPSBuf);
+    }
+}
+
+void ARTPWriter::sendHEVCData(MediaBufferBase *mediaBuf) {
     // 12 bytes RTP header + 2 bytes for the FU-indicator and FU-header.
     CHECK_GE(kMaxPacketSize, 12u + 2u);
 
     int64_t timeUs;
     CHECK(mediaBuf->meta_data().findInt64(kKeyTime, &timeUs));
 
-    uint32_t rtpTime = mRTPTimeBase + (timeUs * 9 / 100LL);
+    sendSPSPPSIfIFrame(mediaBuf, timeUs);
+
+    uint32_t rtpTime = mRTPTimeBase + (timeUs * 9 / 100ll);
 
     const uint8_t *mediaData =
         (const uint8_t *)mediaBuf->data() + mediaBuf->range_offset();
 
     sp<ABuffer> buffer = new ABuffer(kMaxPacketSize);
-    if (mediaBuf->range_length() + 12 <= buffer->capacity()) {
+
+    if (mediaBuf->range_length() + UDP_HEADER_SIZE + RTP_HEADER_SIZE + RTP_PAYLOAD_ROOM_SIZE
+            <= buffer->capacity()) {
         // The data fits into a single packet
         uint8_t *data = buffer->data();
         data[0] = 0x80;
-        data[1] = (1 << 7) | PT;  // M-bit
+        data[1] = (1 << 7) | mPayloadType;  // M-bit
         data[2] = (mSeqNo >> 8) & 0xff;
         data[3] = mSeqNo & 0xff;
         data[4] = rtpTime >> 24;
@@ -611,21 +873,24 @@
     } else {
         // FU-A
 
-        unsigned nalType = mediaData[0];
-        size_t offset = 1;
+        unsigned nalType = (mediaData[0] >> 1) & H265_NALU_MASK;
+        ALOGV("H265 nalType 0x%x, data[0]=0x%x", nalType, mediaData[0]);
+        size_t offset = 2; //H265 payload header is 16 bit.
 
         bool firstPacket = true;
         while (offset < mediaBuf->range_length()) {
             size_t size = mediaBuf->range_length() - offset;
             bool lastPacket = true;
-            if (size + 12 + 2 > buffer->capacity()) {
+            if (size + UDP_HEADER_SIZE + RTP_HEADER_SIZE + RTP_FU_HEADER_SIZE +
+                    RTP_PAYLOAD_ROOM_SIZE > buffer->capacity()) {
                 lastPacket = false;
-                size = buffer->capacity() - 12 - 2;
+                size = buffer->capacity() - UDP_HEADER_SIZE - RTP_HEADER_SIZE -
+                    RTP_FU_HEADER_SIZE - RTP_PAYLOAD_ROOM_SIZE;
             }
 
             uint8_t *data = buffer->data();
             data[0] = 0x80;
-            data[1] = (lastPacket ? (1 << 7) : 0x00) | PT;  // M-bit
+            data[1] = (lastPacket ? (1 << 7) : 0x00) | mPayloadType;  // M-bit
             data[2] = (mSeqNo >> 8) & 0xff;
             data[3] = mSeqNo & 0xff;
             data[4] = rtpTime >> 24;
@@ -637,18 +902,39 @@
             data[10] = (mSourceID >> 8) & 0xff;
             data[11] = mSourceID & 0xff;
 
-            data[12] = 28 | (nalType & 0xe0);
+            /*  H265 payload header is 16 bit
+                 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
+                +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+                |F|     Type  |  Layer ID | TID |
+                +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+            */
+            ALOGV("H265 payload header 0x%x %x", mediaData[0], mediaData[1]);
+            // excludes Type from 1st byte of H265 payload header.
+            data[12] = mediaData[0] & 0x81;
+            // fills Type as FU (49 == 0x31)
+            data[12] = data[12] | (0x31 << 1);
+            data[13] = mediaData[1];
+
+            ALOGV("H265 FU header 0x%x %x", data[12], data[13]);
 
             CHECK(!firstPacket || !lastPacket);
+            /*
+                FU INDICATOR HDR
+                0 1 2 3 4 5 6 7
+                +-+-+-+-+-+-+-+
+                |S|E|   Type  |
+                +-+-+-+-+-+-+-+
+            */
 
-            data[13] =
+            data[14] =
                 (firstPacket ? 0x80 : 0x00)
                 | (lastPacket ? 0x40 : 0x00)
-                | (nalType & 0x1f);
+                | (nalType & H265_NALU_MASK);
+            ALOGV("H265 FU indicator 0x%x", data[14]);
 
-            memcpy(&data[14], &mediaData[offset], size);
+            memcpy(&data[15], &mediaData[offset], size);
 
-            buffer->setRange(0, 14 + size);
+            buffer->setRange(0, 15 + size);
 
             send(buffer, false /* isRTCP */);
 
@@ -663,6 +949,170 @@
 
     mLastRTPTime = rtpTime;
     mLastNTPTime = GetNowNTP();
+
+}
+
+void ARTPWriter::sendAVCData(MediaBufferBase *mediaBuf) {
+    // 12 bytes RTP header + 2 bytes for the FU-indicator and FU-header.
+    CHECK_GE(kMaxPacketSize, 12u + 2u);
+
+    int64_t timeUs;
+    CHECK(mediaBuf->meta_data().findInt64(kKeyTime, &timeUs));
+
+    sendSPSPPSIfIFrame(mediaBuf, timeUs);
+
+    uint32_t rtpTime = mRTPTimeBase + (timeUs * 9 / 100LL);
+
+    const uint8_t *mediaData =
+        (const uint8_t *)mediaBuf->data() + mediaBuf->range_offset();
+
+    int32_t sps, pps;
+    bool isSpsPps = false;
+    if (mediaBuf->meta_data().findInt32(kKeySps, &sps) ||
+            mediaBuf->meta_data().findInt32(kKeyPps, &pps)) {
+        isSpsPps = true;
+    }
+
+    sp<ABuffer> buffer = new ABuffer(kMaxPacketSize);
+    if (mediaBuf->range_length() + UDP_HEADER_SIZE + RTP_HEADER_SIZE + RTP_PAYLOAD_ROOM_SIZE
+            <= buffer->capacity()) {
+        // The data fits into a single packet
+        uint8_t *data = buffer->data();
+        data[0] = 0x80;
+        if (mRTPCVOExtMap > 0)
+            data[0] |= 0x10;
+        if (isSpsPps)
+            data[1] = mPayloadType;  // Marker bit should not be set in case of sps/pps
+        else
+            data[1] = (1 << 7) | mPayloadType;
+        data[2] = (mSeqNo >> 8) & 0xff;
+        data[3] = mSeqNo & 0xff;
+        data[4] = rtpTime >> 24;
+        data[5] = (rtpTime >> 16) & 0xff;
+        data[6] = (rtpTime >> 8) & 0xff;
+        data[7] = rtpTime & 0xff;
+        data[8] = mSourceID >> 24;
+        data[9] = (mSourceID >> 16) & 0xff;
+        data[10] = (mSourceID >> 8) & 0xff;
+        data[11] = mSourceID & 0xff;
+
+        int rtpExtIndex = 0;
+        if (mRTPCVOExtMap > 0) {
+            /*
+                0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+               |       0xBE    |    0xDE       |           length=3            |
+               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+               |  ID   | L=0   |     data      |  ID   |  L=1  |   data...
+               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+                     ...data   |    0 (pad)    |    0 (pad)    |  ID   | L=3   |
+               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+               |                          data                                 |
+               +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+
+
+              In the one-byte header form of extensions, the 16-bit value required
+              by the RTP specification for a header extension, labeled in the RTP
+              specification as "defined by profile", takes the fixed bit pattern
+              0xBEDE (the first version of this specification was written on the
+              feast day of the Venerable Bede).
+            */
+            data[12] = 0xBE;
+            data[13] = 0xDE;
+            // put a length of RTP Extension.
+            data[14] = 0x00;
+            data[15] = 0x01;
+            // put extmap of RTP assigned for CVO.
+            data[16] = (mRTPCVOExtMap << 4) | 0x0;
+            // put image degrees as per CVO specification.
+            data[17] = mRTPCVODegrees;
+            data[18] = 0x0;
+            data[19] = 0x0;
+            rtpExtIndex = 8;
+        }
+
+        memcpy(&data[12 + rtpExtIndex],
+               mediaData, mediaBuf->range_length());
+
+        buffer->setRange(0, mediaBuf->range_length() + (12 + rtpExtIndex));
+
+        send(buffer, false /* isRTCP */);
+
+        ++mSeqNo;
+        ++mNumRTPSent;
+        mNumRTPOctetsSent += buffer->size() - (12 + rtpExtIndex);
+    } else {
+        // FU-A
+
+        unsigned nalType = mediaData[0];
+        size_t offset = 1;
+
+        bool firstPacket = true;
+        while (offset < mediaBuf->range_length()) {
+            size_t size = mediaBuf->range_length() - offset;
+            bool lastPacket = true;
+            if (size + UDP_HEADER_SIZE + RTP_HEADER_SIZE + RTP_FU_HEADER_SIZE +
+                    RTP_PAYLOAD_ROOM_SIZE > buffer->capacity()) {
+                lastPacket = false;
+                size = buffer->capacity() - UDP_HEADER_SIZE - RTP_HEADER_SIZE -
+                    RTP_FU_HEADER_SIZE - RTP_PAYLOAD_ROOM_SIZE;
+            }
+
+            uint8_t *data = buffer->data();
+            data[0] = 0x80;
+            if (lastPacket && mRTPCVOExtMap > 0)
+                data[0] |= 0x10;
+            data[1] = (lastPacket ? (1 << 7) : 0x00) | mPayloadType;  // M-bit
+            data[2] = (mSeqNo >> 8) & 0xff;
+            data[3] = mSeqNo & 0xff;
+            data[4] = rtpTime >> 24;
+            data[5] = (rtpTime >> 16) & 0xff;
+            data[6] = (rtpTime >> 8) & 0xff;
+            data[7] = rtpTime & 0xff;
+            data[8] = mSourceID >> 24;
+            data[9] = (mSourceID >> 16) & 0xff;
+            data[10] = (mSourceID >> 8) & 0xff;
+            data[11] = mSourceID & 0xff;
+
+            int rtpExtIndex = 0;
+            if (lastPacket && mRTPCVOExtMap > 0) {
+                data[12] = 0xBE;
+                data[13] = 0xDE;
+                data[14] = 0x00;
+                data[15] = 0x01;
+                data[16] = (mRTPCVOExtMap << 4) | 0x0;
+                data[17] = mRTPCVODegrees;
+                data[18] = 0x0;
+                data[19] = 0x0;
+                rtpExtIndex = 8;
+            }
+
+            data[12 + rtpExtIndex] = 28 | (nalType & 0xe0);
+
+            CHECK(!firstPacket || !lastPacket);
+
+            data[13 + rtpExtIndex] =
+                (firstPacket ? 0x80 : 0x00)
+                | (lastPacket ? 0x40 : 0x00)
+                | (nalType & 0x1f);
+
+            memcpy(&data[14 + rtpExtIndex], &mediaData[offset], size);
+
+            buffer->setRange(0, 14 + rtpExtIndex + size);
+
+            send(buffer, false /* isRTCP */);
+
+            ++mSeqNo;
+            ++mNumRTPSent;
+            mNumRTPOctetsSent += buffer->size() - (12 + rtpExtIndex);
+
+            firstPacket = false;
+            offset += size;
+        }
+    }
+
+    mLastRTPTime = rtpTime;
+    mLastNTPTime = GetNowNTP();
 }
 
 void ARTPWriter::sendH263Data(MediaBufferBase *mediaBuf) {
@@ -696,7 +1146,7 @@
 
         uint8_t *data = buffer->data();
         data[0] = 0x80;
-        data[1] = (lastPacket ? 0x80 : 0x00) | PT;  // M-bit
+        data[1] = (lastPacket ? 0x80 : 0x00) | mPayloadType;  // M-bit
         data[2] = (mSeqNo >> 8) & 0xff;
         data[3] = mSeqNo & 0xff;
         data[4] = rtpTime >> 24;
@@ -727,6 +1177,54 @@
     mLastNTPTime = GetNowNTP();
 }
 
+void ARTPWriter::updateCVODegrees(int32_t cvoDegrees) {
+    Mutex::Autolock autoLock(mLock);
+    mRTPCVODegrees = cvoDegrees;
+}
+
+void ARTPWriter::updatePayloadType(int32_t payloadType) {
+    Mutex::Autolock autoLock(mLock);
+    mPayloadType = payloadType;
+}
+
+void ARTPWriter::updateSocketDscp(int32_t dscp) {
+    mRtpLayer3Dscp = dscp << 2;
+
+    /* mRtpLayer3Dscp will be mapped to WMM(Wifi) as per operator's requirement */
+    if (setsockopt(mRTPSocket, IPPROTO_IP, IP_TOS,
+                (int *)&mRtpLayer3Dscp, sizeof(mRtpLayer3Dscp)) < 0) {
+        ALOGE("failed to set dscp on rtpsock. err=%s", strerror(errno));
+    } else {
+        ALOGD("successfully set dscp on rtpsock. opt=%d", mRtpLayer3Dscp);
+        setsockopt(mRTCPSocket, IPPROTO_IP, IP_TOS,
+                (int *)&mRtpLayer3Dscp, sizeof(mRtpLayer3Dscp));
+        ALOGD("successfully set dscp on rtcpsock. opt=%d", mRtpLayer3Dscp);
+    }
+}
+
+void ARTPWriter::updateSocketNetwork(int64_t socketNetwork) {
+    mRTPSockNetwork = (net_handle_t)socketNetwork;
+    ALOGI("trying to bind rtp socket(%d) to network(%llu).",
+                mRTPSocket, (unsigned long long)mRTPSockNetwork);
+
+    int result = android_setsocknetwork(mRTPSockNetwork, mRTPSocket);
+    if (result != 0) {
+        ALOGW("failed(%d) to bind rtp socket(%d) to network(%llu)",
+                result, mRTPSocket, (unsigned long long)mRTPSockNetwork);
+    }
+    result = android_setsocknetwork(mRTPSockNetwork, mRTCPSocket);
+    if (result != 0) {
+        ALOGW("failed(%d) to bind rtcp socket(%d) to network(%llu)",
+                result, mRTCPSocket, (unsigned long long)mRTPSockNetwork);
+    }
+    ALOGI("done. bind rtp socket(%d) to network(%llu)",
+                mRTPSocket, (unsigned long long)mRTPSockNetwork);
+}
+
+uint32_t ARTPWriter::getSequenceNum() {
+    return mSeqNo;
+}
+
 static size_t getFrameSize(bool isWide, unsigned FT) {
     static const size_t kFrameSizeNB[8] = {
         95, 103, 118, 134, 148, 159, 204, 244
@@ -778,7 +1276,7 @@
     // The data fits into a single packet
     uint8_t *data = buffer->data();
     data[0] = 0x80;
-    data[1] = PT;
+    data[1] = mPayloadType;
     if (mNumRTPSent == 0) {
         // Signal start of talk-spurt.
         data[1] |= 0x80;  // M-bit
@@ -834,5 +1332,80 @@
     mLastNTPTime = GetNowNTP();
 }
 
-}  // namespace android
+void ARTPWriter::makeSocketPairAndBind(String8& localIp, int localPort,
+        String8& remoteIp, int remotePort) {
+    static char kSomeone[16] = "someone@";
+    int nameLength = strlen(kSomeone);
+    memcpy(kCNAME, kSomeone, nameLength);
+    memcpy(kCNAME + nameLength, localIp.c_str(), localIp.length() + 1);
 
+    if (localIp.contains(":"))
+        mIsIPv6 = true;
+    else
+        mIsIPv6 = false;
+
+    mRTPSocket = socket(mIsIPv6 ? AF_INET6 : AF_INET, SOCK_DGRAM, 0);
+    CHECK_GE(mRTPSocket, 0);
+    mRTCPSocket = socket(mIsIPv6 ? AF_INET6 : AF_INET, SOCK_DGRAM, 0);
+    CHECK_GE(mRTCPSocket, 0);
+
+    int sockopt = 1;
+    setsockopt(mRTPSocket, SOL_SOCKET, SO_REUSEADDR, (int *)&sockopt, sizeof(sockopt));
+    setsockopt(mRTCPSocket, SOL_SOCKET, SO_REUSEADDR, (int *)&sockopt, sizeof(sockopt));
+
+    if (mIsIPv6) {
+        memset(&mLocalAddr6, 0, sizeof(mLocalAddr6));
+        memset(&mRTPAddr6, 0, sizeof(mRTPAddr6));
+        memset(&mRTCPAddr6, 0, sizeof(mRTCPAddr6));
+
+        mLocalAddr6.sin6_family = AF_INET6;
+        inet_pton(AF_INET6, localIp.string(), &mLocalAddr6.sin6_addr);
+        mLocalAddr6.sin6_port = htons((uint16_t)localPort);
+
+        mRTPAddr6.sin6_family = AF_INET6;
+        inet_pton(AF_INET6, remoteIp.string(), &mRTPAddr6.sin6_addr);
+        mRTPAddr6.sin6_port = htons((uint16_t)remotePort);
+
+        mRTCPAddr6 = mRTPAddr6;
+        mRTCPAddr6.sin6_port = htons((uint16_t)(remotePort + 1));
+    } else {
+        memset(&mLocalAddr, 0, sizeof(mLocalAddr));
+        memset(&mRTPAddr, 0, sizeof(mRTPAddr));
+        memset(&mRTCPAddr, 0, sizeof(mRTCPAddr));
+
+        mLocalAddr.sin_family = AF_INET;
+        mLocalAddr.sin_addr.s_addr = inet_addr(localIp.string());
+        mLocalAddr.sin_port = htons((uint16_t)localPort);
+
+        mRTPAddr.sin_family = AF_INET;
+        mRTPAddr.sin_addr.s_addr = inet_addr(remoteIp.string());
+        mRTPAddr.sin_port = htons((uint16_t)remotePort);
+
+        mRTCPAddr = mRTPAddr;
+        mRTCPAddr.sin_port = htons((uint16_t)(remotePort + 1));
+    }
+
+    struct sockaddr *localAddr = mIsIPv6 ?
+        (struct sockaddr*)&mLocalAddr6 : (struct sockaddr*)&mLocalAddr;
+
+    int sizeSockSt = mIsIPv6 ? sizeof(mLocalAddr6) : sizeof(mLocalAddr);
+
+    if (bind(mRTPSocket, localAddr, sizeSockSt) == -1) {
+        ALOGE("failed to bind rtp %s:%d err=%s", localIp.string(), localPort, strerror(errno));
+    } else {
+        ALOGD("succeed to bind rtp %s:%d", localIp.string(), localPort);
+    }
+
+    if (mIsIPv6)
+        mLocalAddr6.sin6_port = htons((uint16_t)(localPort + 1));
+    else
+        mLocalAddr.sin_port = htons((uint16_t)(localPort + 1));
+
+    if (bind(mRTCPSocket, localAddr, sizeSockSt) == -1) {
+        ALOGE("failed to bind rtcp %s:%d err=%s", localIp.string(), localPort + 1, strerror(errno));
+    } else {
+        ALOGD("succeed to bind rtcp %s:%d", localIp.string(), localPort + 1);
+    }
+}
+
+}  // namespace android
diff --git a/media/libstagefright/rtsp/ARTPWriter.h b/media/libstagefright/rtsp/ARTPWriter.h
index 2f13486..f7e2204 100644
--- a/media/libstagefright/rtsp/ARTPWriter.h
+++ b/media/libstagefright/rtsp/ARTPWriter.h
@@ -27,6 +27,8 @@
 #include <arpa/inet.h>
 #include <sys/socket.h>
 
+#include <android/multinetwork.h>
+
 #define LOG_TO_FILES    0
 
 namespace android {
@@ -36,14 +38,23 @@
 
 struct ARTPWriter : public MediaWriter {
     explicit ARTPWriter(int fd);
+    explicit ARTPWriter(int fd, String8& localIp, int localPort,
+                                String8& remoteIp, int remotePort,
+                                uint32_t seqNo);
 
     virtual status_t addSource(const sp<MediaSource> &source);
     virtual bool reachedEOS();
     virtual status_t start(MetaData *params);
     virtual status_t stop();
     virtual status_t pause();
+    void updateCVODegrees(int32_t cvoDegrees);
+    void updatePayloadType(int32_t payloadType);
+    void updateSocketDscp(int32_t dscp);
+    void updateSocketNetwork(int64_t socketNetwork);
+    uint32_t getSequenceNum();
 
     virtual void onMessageReceived(const sp<AMessage> &msg);
+    virtual void setTMMBNInfo(uint32_t opponentID, uint32_t bitrate);
 
 protected:
     virtual ~ARTPWriter();
@@ -76,15 +87,26 @@
     sp<ALooper> mLooper;
     sp<AHandlerReflector<ARTPWriter> > mReflector;
 
-    int mSocket;
+    bool mIsIPv6;
+    int mRTPSocket, mRTCPSocket;
+    struct sockaddr_in mLocalAddr;
     struct sockaddr_in mRTPAddr;
     struct sockaddr_in mRTCPAddr;
+    struct sockaddr_in6 mLocalAddr6;
+    struct sockaddr_in6 mRTPAddr6;
+    struct sockaddr_in6 mRTCPAddr6;
+    int32_t mRtpLayer3Dscp;
+    net_handle_t mRTPSockNetwork;
 
     AString mProfileLevel;
     AString mSeqParamSet;
     AString mPicParamSet;
 
+    MediaBufferBase *mSPSBuf;
+    MediaBufferBase *mPPSBuf;
+
     uint32_t mSourceID;
+    uint32_t mPayloadType;
     uint32_t mSeqNo;
     uint32_t mRTPTimeBase;
     uint32_t mNumRTPSent;
@@ -92,10 +114,16 @@
     uint32_t mLastRTPTime;
     uint64_t mLastNTPTime;
 
+    uint32_t mOpponentID;
+    uint32_t mBitrate;
+
     int32_t mNumSRsSent;
+    int32_t mRTPCVOExtMap;
+    int32_t mRTPCVODegrees;
 
     enum {
         INVALID,
+        H265,
         H264,
         H263,
         AMR_NB,
@@ -109,16 +137,20 @@
 
     void addSR(const sp<ABuffer> &buffer);
     void addSDES(const sp<ABuffer> &buffer);
+    void addTMMBN(const sp<ABuffer> &buffer);
 
     void makeH264SPropParamSets(MediaBufferBase *buffer);
     void dumpSessionDesc();
 
     void sendBye();
+    void sendSPSPPSIfIFrame(MediaBufferBase *mediaBuf, int64_t timeUs);
+    void sendHEVCData(MediaBufferBase *mediaBuf);
     void sendAVCData(MediaBufferBase *mediaBuf);
     void sendH263Data(MediaBufferBase *mediaBuf);
     void sendAMRData(MediaBufferBase *mediaBuf);
 
     void send(const sp<ABuffer> &buffer, bool isRTCP);
+    void makeSocketPairAndBind(String8& localIp, int localPort, String8& remoteIp, int remotePort);
 
     DISALLOW_EVIL_CONSTRUCTORS(ARTPWriter);
 };
diff --git a/media/libstagefright/rtsp/ASessionDescription.cpp b/media/libstagefright/rtsp/ASessionDescription.cpp
index 2b42040..4502f62 100644
--- a/media/libstagefright/rtsp/ASessionDescription.cpp
+++ b/media/libstagefright/rtsp/ASessionDescription.cpp
@@ -103,7 +103,7 @@
                     key.setTo(line, 0, colonPos);
 
                     if (key == "a=fmtp" || key == "a=rtpmap"
-                            || key == "a=framesize") {
+                            || key == "a=framesize" || key == "a=extmap") {
                         ssize_t spacePos = line.find(" ", colonPos + 1);
                         if (spacePos < 0) {
                             return false;
@@ -201,6 +201,33 @@
     return true;
 }
 
+bool ASessionDescription::getCvoExtMap(
+        size_t index, int32_t *cvoExtMap) const {
+    CHECK_GE(index, 0u);
+    CHECK_LT(index, mTracks.size());
+
+    AString key, value;
+    *cvoExtMap = 0;
+
+    const Attribs &track = mTracks.itemAt(index);
+    for (size_t i = 0; i < track.size(); i++) {
+        value = track.valueAt(i);
+        if (value.size() > 0 && strcmp(value.c_str(), "urn:3gpp:video-orientation") == 0) {
+            key = track.keyAt(i);
+            break;
+        }
+    }
+
+    if (key.size() > 0) {
+        const char *colonPos = strrchr(key.c_str(), ':');
+        colonPos++;
+        *cvoExtMap = atoi(colonPos);
+        return true;
+    }
+
+    return false;
+}
+
 void ASessionDescription::getFormatType(
         size_t index, unsigned long *PT,
         AString *desc, AString *params) const {
@@ -345,5 +372,74 @@
     return *npt2 > *npt1;
 }
 
+// static
+void ASessionDescription::SDPStringFactory(AString &sdp,
+        const char *ip, bool isAudio, unsigned port, unsigned payloadType,
+        unsigned as, const char *codec, const char *fmtp,
+        int32_t width, int32_t height, int32_t cvoExtMap)
+{
+    bool isIPv4 = (AString(ip).find("::") == -1) ? true : false;
+    sdp.clear();
+    sdp.append("v=0\r\n");
+
+    sdp.append("a=range:npt=now-\r\n");
+
+    sdp.append("m=");
+    sdp.append(isAudio ? "audio " : "video ");
+    sdp.append(port);
+    sdp.append(" RTP/AVP ");
+    sdp.append(payloadType);
+    sdp.append("\r\n");
+
+    sdp.append("c= IN IP");
+    if (isIPv4) {
+        sdp.append("4 ");
+    } else {
+        sdp.append("6 ");
+    }
+    sdp.append(ip);
+    sdp.append("\r\n");
+
+    sdp.append("b=AS:");
+    sdp.append(as > 0 ? as : 960);
+    sdp.append("\r\n");
+
+    sdp.append("a=rtpmap:");
+    sdp.append(payloadType);
+    sdp.append(" ");
+    sdp.append(codec);
+    sdp.append("/");
+    sdp.append(isAudio ? "8000" : "90000");
+    sdp.append("\r\n");
+
+    if (fmtp != NULL) {
+        sdp.append("a=fmtp:");
+        sdp.append(payloadType);
+        sdp.append(" ");
+        sdp.append(fmtp);
+        sdp.append("\r\n");
+    }
+
+    if (width > 0 && height > 0) {
+        sdp.append("a=framesize:");
+        sdp.append(payloadType);
+        sdp.append(" ");
+        sdp.append(width);
+        sdp.append("-");
+        sdp.append(height);
+        sdp.append("\r\n");
+    }
+
+    if (cvoExtMap > 0) {
+        sdp.append("a=extmap:");
+        sdp.append(cvoExtMap);
+        sdp.append(" ");
+        sdp.append("urn:3gpp:video-orientation");
+        sdp.append("\r\n");
+    }
+
+    ALOGV("SDPStringFactory => %s", sdp.c_str());
+}
+
 }  // namespace android
 
diff --git a/media/libstagefright/rtsp/ASessionDescription.h b/media/libstagefright/rtsp/ASessionDescription.h
index b462983..91f5442 100644
--- a/media/libstagefright/rtsp/ASessionDescription.h
+++ b/media/libstagefright/rtsp/ASessionDescription.h
@@ -40,6 +40,8 @@
     size_t countTracks() const;
     void getFormat(size_t index, AString *value) const;
 
+    bool getCvoExtMap(size_t index, int32_t *cvoExtMap) const;
+
     void getFormatType(
             size_t index, unsigned long *PT,
             AString *desc, AString *params) const;
@@ -63,6 +65,9 @@
     // i.e. we have a fixed duration, otherwise this is live streaming.
     static bool parseNTPRange(const char *s, float *npt1, float *npt2);
 
+    static void SDPStringFactory(AString &sdp, const char *ip, bool isAudio, unsigned port,
+        unsigned payloadType, unsigned as, const char *codec, const char *fmtp = NULL,
+        int32_t width = 0, int32_t height = 0, int32_t cvoExtMap = 0);
 protected:
     virtual ~ASessionDescription();
 
diff --git a/media/libstagefright/rtsp/Android.bp b/media/libstagefright/rtsp/Android.bp
index a5a895e..84a47af 100644
--- a/media/libstagefright/rtsp/Android.bp
+++ b/media/libstagefright/rtsp/Android.bp
@@ -4,6 +4,7 @@
     srcs: [
         "AAMRAssembler.cpp",
         "AAVCAssembler.cpp",
+        "AHEVCAssembler.cpp",
         "AH263Assembler.cpp",
         "AMPEG2TSAssembler.cpp",
         "AMPEG4AudioAssembler.cpp",
@@ -17,9 +18,12 @@
         "ARTSPConnection.cpp",
         "ASessionDescription.cpp",
         "SDPLoader.cpp",
+        "QualManager.cpp",
     ],
 
     shared_libs: [
+        "libandroid",
+        "libandroid_net",
         "libcrypto",
         "libdatasource",
         "libmedia",
@@ -28,6 +32,7 @@
     include_dirs: [
         "frameworks/av/media/libstagefright",
         "frameworks/native/include/media/openmax",
+        "frameworks/native/include/android",
     ],
 
     arch: {
diff --git a/media/libstagefright/rtsp/MyHandler.h b/media/libstagefright/rtsp/MyHandler.h
index 7f025a5..0fdf431 100644
--- a/media/libstagefright/rtsp/MyHandler.h
+++ b/media/libstagefright/rtsp/MyHandler.h
@@ -1032,6 +1032,11 @@
                     break;
                 }
 
+                int32_t rtcpEvent;
+                if (msg->findInt32("rtcp-event", &rtcpEvent)) {
+                    break;
+                }
+
                 ++mNumAccessUnitsReceived;
                 postAccessUnitTimeoutCheck();
 
diff --git a/media/libstagefright/rtsp/QualManager.cpp b/media/libstagefright/rtsp/QualManager.cpp
new file mode 100644
index 0000000..37aa326
--- /dev/null
+++ b/media/libstagefright/rtsp/QualManager.cpp
@@ -0,0 +1,174 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#define LOG_TAG "QualManager"
+
+#include <algorithm>
+
+#include <sys/prctl.h>
+#include <utils/Log.h>
+
+#include "QualManager.h"
+
+namespace android {
+
+QualManager::Watcher::Watcher(int32_t timeLimit)
+    : Thread(false), mWatching(false), mSwitch(false),
+      mTimeLimit(timeLimit * 1000000LL)     // timeLimit ms
+{
+}
+
+bool QualManager::Watcher::isExpired() const
+{
+    return mSwitch;
+}
+
+void QualManager::Watcher::setup() {
+    AutoMutex _l(mMyLock);
+    if (mWatching == false) {
+        mWatching = true;
+        mMyCond.signal();
+    }
+}
+
+void QualManager::Watcher::release() {
+    AutoMutex _l(mMyLock);
+    if (mSwitch) {
+        ALOGW("%s DISARMED", name);
+        mSwitch = false;
+    }
+    if (mWatching == true) {
+        ALOGW("%s DISARMED", name);
+        mWatching = false;
+        mMyCond.signal();
+    }
+}
+
+void QualManager::Watcher::exit() {
+    AutoMutex _l(mMyLock);
+    // The order is important to avoid dead lock.
+    Thread::requestExit();
+    mMyCond.signal();
+}
+
+QualManager::Watcher::~Watcher() {
+    ALOGI("%s thread dead", name);
+}
+
+bool QualManager::Watcher::threadLoop() {
+    AutoMutex _l(mMyLock);
+#if defined(__linux__)
+    prctl(PR_GET_NAME, name, 0, 0, 0);
+#endif
+    while (!exitPending()) {
+        ALOGW("%s Timer init", name);
+        mMyCond.wait(mMyLock);                      // waits as non-watching state
+        if (exitPending())
+            return false;
+        ALOGW("%s timer BOOM after %d msec", name, (int)(mTimeLimit / 1000000LL));
+        mMyCond.waitRelative(mMyLock, mTimeLimit);  // waits as watching satte
+        if (mWatching == true) {
+            mSwitch = true;
+            ALOGW("%s BOOM!!!!", name);
+        }
+        mWatching = false;
+    }
+    return false;
+}
+
+
+QualManager::QualManager()
+    : mMinBitrate(-1), mMaxBitrate(-1),
+      mTargetBitrate(512000), mLastTargetBitrate(-1),
+      mLastSetBitrateTime(0), mIsNewTargetBitrate(false)
+{
+    VFPWatcher = new Watcher(3000);     //Very Few Packet Watcher
+    VFPWatcher->run("VeryFewPtk");
+    LBRWatcher = new Watcher(10000);    //Low Bit Rate Watcher
+    LBRWatcher->run("LowBitRate");
+}
+
+QualManager::~QualManager() {
+    VFPWatcher->exit();
+    LBRWatcher->exit();
+}
+
+int32_t QualManager::getTargetBitrate() {
+    if (mIsNewTargetBitrate) {
+        mIsNewTargetBitrate = false;
+        mLastTargetBitrate = clampingBitrate(mTargetBitrate);
+        mTargetBitrate = mLastTargetBitrate;
+        return mTargetBitrate;
+    } else {
+        return -1;
+    }
+}
+
+bool QualManager::isNeedToDowngrade() {
+    return LBRWatcher->isExpired();
+}
+
+void QualManager::setTargetBitrate(uint8_t fraction, int64_t nowUs, bool isTooLowPkts) {
+    /* Too Low Packet. Maybe opponent is switching camera.
+     * If this condition goes longer, we should down bitrate.
+     */
+    if (isTooLowPkts) {
+        VFPWatcher->setup();
+    } else {
+        VFPWatcher->release();
+    }
+
+    if ((fraction > (256 * 5 / 100) && !isTooLowPkts) || VFPWatcher->isExpired()) {
+        // loss more than 5%                          or  VFPWatcher BOOMED
+        mTargetBitrate -= mBitrateStep * 3;
+    } else if (fraction <= (256 * 2 /100)) {
+        // loss less than 2%
+        mTargetBitrate += mBitrateStep;
+    }
+
+    if (mTargetBitrate > mMaxBitrate) {
+        mTargetBitrate = mMaxBitrate + mBitrateStep;
+    } else if (mTargetBitrate < mMinBitrate) {
+        LBRWatcher->setup();
+        mTargetBitrate = mMinBitrate - mBitrateStep;
+    }
+
+    if (mLastTargetBitrate != clampingBitrate(mTargetBitrate) ||
+        nowUs - mLastSetBitrateTime > 5000000ll) {
+        mIsNewTargetBitrate = true;
+        mLastSetBitrateTime = nowUs;
+    }
+}
+
+void QualManager::setMinMaxBitrate(int32_t min, int32_t max) {
+    mMinBitrate = min;
+    mMaxBitrate = max;
+    mBitrateStep = (max - min) / 8;
+}
+
+void QualManager::setBitrateData(int32_t bitrate, int64_t /*now*/) {
+    // A bitrate that is considered packetloss also should be good.
+    if (bitrate >= mMinBitrate && mTargetBitrate >= mMinBitrate) {
+        LBRWatcher->release();
+    } else if (bitrate < mMinBitrate){
+        LBRWatcher->setup();
+    }
+}
+
+int32_t QualManager::clampingBitrate(int32_t bitrate) {
+    return std::min(std::max(mMinBitrate, bitrate), mMaxBitrate);
+}
+} // namespace android
diff --git a/media/libstagefright/rtsp/QualManager.h b/media/libstagefright/rtsp/QualManager.h
new file mode 100644
index 0000000..a7dc921
--- /dev/null
+++ b/media/libstagefright/rtsp/QualManager.h
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2018 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef QUAL_MANAGER_H_
+
+#define QUAL_MANAGER_H_
+
+#include <stdint.h>
+#include <utils/Thread.h>
+
+namespace android {
+class QualManager {
+public:
+    QualManager();
+    ~QualManager();
+
+    int32_t getTargetBitrate();
+    bool isNeedToDowngrade();
+
+    void setTargetBitrate(uint8_t fraction, int64_t nowUs, bool isTooLowPkts);
+    void setMinMaxBitrate(int32_t min, int32_t max);
+    void setBitrateData(int32_t bitrate, int64_t now);
+private:
+    class Watcher : public Thread
+    {
+    public:
+        Watcher(int32_t timeLimit);
+
+        void setup();
+        void release();
+        void exit();
+        bool isExpired() const;
+    private:
+        virtual ~Watcher();
+        virtual bool threadLoop();
+
+        char name[32] = {0,};
+
+        Condition mMyCond;
+        Mutex mMyLock;
+
+        bool mWatching;
+        bool mSwitch;
+        const nsecs_t mTimeLimit;
+    };
+    sp<Watcher> VFPWatcher;
+    sp<Watcher> LBRWatcher;
+    int32_t mMinBitrate;
+    int32_t mMaxBitrate;
+    int32_t mBitrateStep;
+
+    int32_t mTargetBitrate;
+    int32_t mLastTargetBitrate;
+    int64_t mLastSetBitrateTime;
+
+    bool mIsNewTargetBitrate;
+
+    int32_t clampingBitrate(int32_t bitrate);
+};
+} //namespace android
+
+#endif  // QUAL_MANAGER_H_
diff --git a/media/ndk/NdkImagePriv.h b/media/ndk/NdkImagePriv.h
index 0e8cbcb..b019448 100644
--- a/media/ndk/NdkImagePriv.h
+++ b/media/ndk/NdkImagePriv.h
@@ -30,6 +30,18 @@
 
 using namespace android;
 
+// Formats not listed in the public API, but still available to AImageReader
+enum AIMAGE_PRIVATE_FORMATS {
+    /**
+     * Unprocessed implementation-dependent raw
+     * depth measurements, opaque with 16 bit
+     * samples.
+     *
+     */
+
+    AIMAGE_FORMAT_RAW_DEPTH = 0x1002,
+};
+
 // TODO: this only supports ImageReader
 struct AImage {
     AImage(AImageReader* reader, int32_t format, uint64_t usage, BufferItem* buffer,
diff --git a/media/ndk/NdkImageReader.cpp b/media/ndk/NdkImageReader.cpp
index c0ceb3d..5d8f0b8 100644
--- a/media/ndk/NdkImageReader.cpp
+++ b/media/ndk/NdkImageReader.cpp
@@ -21,7 +21,6 @@
 
 #include "NdkImagePriv.h"
 #include "NdkImageReaderPriv.h"
-#include <private/media/NdkImage.h>
 
 #include <cutils/atomic.h>
 #include <utils/Log.h>
diff --git a/media/ndk/include/private/media/NdkImage.h b/media/ndk/include/private/media/NdkImage.h
deleted file mode 100644
index 4368a56..0000000
--- a/media/ndk/include/private/media/NdkImage.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2019 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef _PRIVATE_MEDIA_NDKIMAGE_H_
-#define _PRIVATE_MEDIA_NDKIMAGE_H_
-// Formats not listed in the public API, but still available to AImageReader
-enum AIMAGE_PRIVATE_FORMATS {
-    /**
-     * Unprocessed implementation-dependent raw
-     * depth measurements, opaque with 16 bit
-     * samples.
-     *
-     */
-
-    AIMAGE_FORMAT_RAW_DEPTH = 0x1002,
-};
-#endif // _PRIVATE_MEDIA_NDKIMAGE
diff --git a/media/ndk/tests/AImageReaderWindowHandleTest.cpp b/media/ndk/tests/AImageReaderWindowHandleTest.cpp
index 5b65064..27864c2 100644
--- a/media/ndk/tests/AImageReaderWindowHandleTest.cpp
+++ b/media/ndk/tests/AImageReaderWindowHandleTest.cpp
@@ -17,10 +17,10 @@
 #include <gtest/gtest.h>
 #include <media/NdkImageReader.h>
 #include <media/NdkImage.h>
-#include <private/media/NdkImage.h>
 #include <mediautils/AImageReaderUtils.h>
 #include <gui/IGraphicBufferProducer.h>
 #include <gui/bufferqueue/1.0/H2BGraphicBufferProducer.h>
+#include <NdkImagePriv.h>
 #include <NdkImageReaderPriv.h>
 #include <vndk/hardware_buffer.h>
 #include <memory>
diff --git a/services/audioflinger/AudioFlinger.h b/services/audioflinger/AudioFlinger.h
index 5c20a2d..3e486c3 100644
--- a/services/audioflinger/AudioFlinger.h
+++ b/services/audioflinger/AudioFlinger.h
@@ -89,7 +89,7 @@
 #include "AudioHwDevice.h"
 #include "NBAIO_Tee.h"
 
-#include <powermanager/IPowerManager.h>
+#include <android/os/IPowerManager.h>
 
 #include <media/nblog/NBLog.h>
 #include <private/media/AudioEffectShared.h>
diff --git a/services/audioflinger/Threads.cpp b/services/audioflinger/Threads.cpp
index 105fa14..0e96522 100644
--- a/services/audioflinger/Threads.cpp
+++ b/services/audioflinger/Threads.cpp
@@ -983,15 +983,16 @@
     if (mPowerManager != 0) {
         sp<IBinder> binder = new BBinder();
         // Uses AID_AUDIOSERVER for wakelock.  updateWakeLockUids_l() updates with client uids.
-        status_t status = mPowerManager->acquireWakeLock(POWERMANAGER_PARTIAL_WAKE_LOCK,
-                    binder,
+        binder::Status status = mPowerManager->acquireWakeLockAsync(binder,
+                    POWERMANAGER_PARTIAL_WAKE_LOCK,
                     getWakeLockTag(),
                     String16("audioserver"),
-                    true /* FIXME force oneway contrary to .aidl */);
-        if (status == NO_ERROR) {
+                    {} /* workSource */,
+                    {} /* historyTag */);
+        if (status.isOk()) {
             mWakeLockToken = binder;
         }
-        ALOGV("acquireWakeLock_l() %s status %d", mThreadName, status);
+        ALOGV("acquireWakeLock_l() %s status %d", mThreadName, status.exceptionCode());
     }
 
     gBoottime.acquire(mWakeLockToken);
@@ -1011,8 +1012,7 @@
     if (mWakeLockToken != 0) {
         ALOGV("releaseWakeLock_l() %s", mThreadName);
         if (mPowerManager != 0) {
-            mPowerManager->releaseWakeLock(mWakeLockToken, 0,
-                    true /* FIXME force oneway contrary to .aidl */);
+            mPowerManager->releaseWakeLockAsync(mWakeLockToken, 0);
         }
         mWakeLockToken.clear();
     }
@@ -1026,7 +1026,7 @@
         if (binder == 0) {
             ALOGW("Thread %s cannot connect to the power manager service", mThreadName);
         } else {
-            mPowerManager = interface_cast<IPowerManager>(binder);
+            mPowerManager = interface_cast<os::IPowerManager>(binder);
             binder->linkToDeath(mDeathRecipient);
         }
     }
@@ -1053,10 +1053,9 @@
     }
     if (mPowerManager != 0) {
         std::vector<int> uidsAsInt(uids.begin(), uids.end()); // powermanager expects uids as ints
-        status_t status = mPowerManager->updateWakeLockUids(
-                mWakeLockToken, uidsAsInt.size(), uidsAsInt.data(),
-                true /* FIXME force oneway contrary to .aidl */);
-        ALOGV("updateWakeLockUids_l() %s status %d", mThreadName, status);
+        binder::Status status = mPowerManager->updateWakeLockUidsAsync(
+                mWakeLockToken, uidsAsInt);
+        ALOGV("updateWakeLockUids_l() %s status %d", mThreadName, status.exceptionCode());
     }
 }
 
diff --git a/services/audioflinger/Threads.h b/services/audioflinger/Threads.h
index e5a6196..b56eabc 100644
--- a/services/audioflinger/Threads.h
+++ b/services/audioflinger/Threads.h
@@ -562,7 +562,7 @@
 
                 static const int        kThreadNameLength = 16; // prctl(PR_SET_NAME) limit
                 char                    mThreadName[kThreadNameLength]; // guaranteed NUL-terminated
-                sp<IPowerManager>       mPowerManager;
+                sp<os::IPowerManager>   mPowerManager;
                 sp<IBinder>             mWakeLockToken;
                 const sp<PMDeathRecipient> mDeathRecipient;
                 // list of suspended effects per session and per type. The first (outer) vector is
diff --git a/services/audiopolicy/engine/common/src/VolumeCurve.cpp b/services/audiopolicy/engine/common/src/VolumeCurve.cpp
index c352578..8aa4b08 100644
--- a/services/audiopolicy/engine/common/src/VolumeCurve.cpp
+++ b/services/audiopolicy/engine/common/src/VolumeCurve.cpp
@@ -43,10 +43,24 @@
         indexInUi = volIndexMax;
     }
 
+    // Calculate the new volume index
     size_t nbCurvePoints = mCurvePoints.size();
-    // the volume index in the UI is relative to the min and max volume indices for this stream
-    int nbSteps = 1 + mCurvePoints[nbCurvePoints - 1].mIndex - mCurvePoints[0].mIndex;
-    int volIdx = (nbSteps * (indexInUi - volIndexMin)) / (volIndexMax - volIndexMin);
+
+    int volIdx;
+    if (volIndexMin == volIndexMax) {
+        if (indexInUi == volIndexMin) {
+            volIdx = volIndexMin;
+        } else {
+            // This would result in a divide-by-zero below
+            ALOG_ASSERT(volIndexmin != volIndexMax, "Invalid volume index range & value: 0");
+            return NAN;
+        }
+    } else {
+        // interpolaate
+        // the volume index in the UI is relative to the min and max volume indices for this stream
+        int nbSteps = 1 + mCurvePoints[nbCurvePoints - 1].mIndex - mCurvePoints[0].mIndex;
+        volIdx = (nbSteps * (indexInUi - volIndexMin)) / (volIndexMax - volIndexMin);
+    }
 
     // Where would this volume index been inserted in the curve point
     size_t indexInUiPosition = mCurvePoints.orderOf(CurvePoint(volIdx, 0));
diff --git a/services/audiopolicy/manager/Android.bp b/services/audiopolicy/manager/Android.bp
new file mode 100644
index 0000000..5bb432f
--- /dev/null
+++ b/services/audiopolicy/manager/Android.bp
@@ -0,0 +1,32 @@
+cc_library_shared {
+    name: "libaudiopolicymanager",
+
+    srcs: [
+        "AudioPolicyFactory.cpp",
+    ],
+
+    include_dirs: [
+        "frameworks/av/services/audioflinger"
+    ],
+
+    shared_libs: [
+        "libaudiopolicymanagerdefault",
+    ],
+
+    static_libs: [
+        "libaudiopolicycomponents",
+    ],
+
+    header_libs: [
+        "libaudiopolicycommon",
+        "libaudiopolicyengine_interface_headers",
+        "libaudiopolicymanager_interface_headers",
+        "libaudioutils_headers",
+    ],
+
+    cflags: [
+        "-Werror",
+        "-Wall",
+    ],
+
+}
diff --git a/services/audiopolicy/manager/Android.mk b/services/audiopolicy/manager/Android.mk
deleted file mode 100644
index cae6cfa..0000000
--- a/services/audiopolicy/manager/Android.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-LOCAL_PATH:= $(call my-dir)
-
-ifneq ($(USE_CUSTOM_AUDIO_POLICY), 1)
-
-include $(CLEAR_VARS)
-
-LOCAL_SRC_FILES:= \
-    AudioPolicyFactory.cpp
-
-LOCAL_SHARED_LIBRARIES := \
-    libaudiopolicymanagerdefault
-
-LOCAL_STATIC_LIBRARIES := \
-    libaudiopolicycomponents
-
-LOCAL_C_INCLUDES += \
-    $(call include-path-for, audio-utils)
-
-LOCAL_HEADER_LIBRARIES := \
-    libaudiopolicycommon \
-    libaudiopolicyengine_interface_headers \
-    libaudiopolicymanager_interface_headers
-
-LOCAL_CFLAGS := -Wall -Werror
-
-LOCAL_MODULE:= libaudiopolicymanager
-
-include $(BUILD_SHARED_LIBRARY)
-
-endif #ifneq ($(USE_CUSTOM_AUDIO_POLICY), 1)
diff --git a/services/audiopolicy/service/Android.bp b/services/audiopolicy/service/Android.bp
new file mode 100644
index 0000000..6ee573f
--- /dev/null
+++ b/services/audiopolicy/service/Android.bp
@@ -0,0 +1,54 @@
+cc_library_shared {
+    name: "libaudiopolicyservice",
+
+    srcs: [
+        "AudioPolicyClientImpl.cpp",
+        "AudioPolicyEffects.cpp",
+        "AudioPolicyInterfaceImpl.cpp",
+        "AudioPolicyService.cpp",
+        "CaptureStateNotifier.cpp",
+    ],
+
+    include_dirs: [
+        "frameworks/av/services/audioflinger"
+    ],
+
+    shared_libs: [
+        "libaudioclient",
+        "libaudiofoundation",
+        "libaudiopolicymanager",
+        "libaudioutils",
+        "libbinder",
+        "libcutils",
+        "libeffectsconfig",
+        "libhardware_legacy",
+        "liblog",
+        "libmedia_helper",
+        "libmediametrics",
+        "libmediautils",
+        "libsensorprivacy",
+        "libutils",
+        "capture_state_listener-aidl-cpp",
+    ],
+
+    static_libs: [
+        "libaudiopolicycomponents",
+    ],
+
+    header_libs: [
+        "libaudiopolicycommon",
+        "libaudiopolicyengine_interface_headers",
+        "libaudiopolicymanager_interface_headers",
+        "libaudioutils_headers",
+    ],
+
+    cflags: [
+        "-fvisibility=hidden",
+        "-Werror",
+        "-Wall",
+    ],
+
+    export_shared_lib_headers: [
+        "libsensorprivacy",
+    ],
+}
diff --git a/services/audiopolicy/service/Android.mk b/services/audiopolicy/service/Android.mk
deleted file mode 100644
index 94e4811..0000000
--- a/services/audiopolicy/service/Android.mk
+++ /dev/null
@@ -1,50 +0,0 @@
-LOCAL_PATH:= $(call my-dir)
-
-include $(CLEAR_VARS)
-
-LOCAL_SRC_FILES:= \
-    AudioPolicyService.cpp \
-    AudioPolicyEffects.cpp \
-    AudioPolicyInterfaceImpl.cpp \
-    AudioPolicyClientImpl.cpp \
-    CaptureStateNotifier.cpp
-
-LOCAL_C_INCLUDES := \
-    frameworks/av/services/audioflinger \
-    $(call include-path-for, audio-utils)
-
-LOCAL_HEADER_LIBRARIES := \
-    libaudiopolicycommon \
-    libaudiopolicyengine_interface_headers \
-    libaudiopolicymanager_interface_headers
-
-LOCAL_SHARED_LIBRARIES := \
-    libcutils \
-    libutils \
-    liblog \
-    libbinder \
-    libaudioclient \
-    libaudioutils \
-    libaudiofoundation \
-    libhardware_legacy \
-    libaudiopolicymanager \
-    libmedia_helper \
-    libmediametrics \
-    libmediautils \
-    libeffectsconfig \
-    libsensorprivacy \
-    capture_state_listener-aidl-cpp
-
-LOCAL_EXPORT_SHARED_LIBRARY_HEADERS := \
-    libsensorprivacy
-
-LOCAL_STATIC_LIBRARIES := \
-    libaudiopolicycomponents
-
-LOCAL_MODULE:= libaudiopolicyservice
-
-LOCAL_CFLAGS += -fvisibility=hidden
-LOCAL_CFLAGS += -Wall -Werror
-
-include $(BUILD_SHARED_LIBRARY)
-
diff --git a/services/mediatranscoding/MediaTranscodingService.cpp b/services/mediatranscoding/MediaTranscodingService.cpp
index 82d4161..0289613 100644
--- a/services/mediatranscoding/MediaTranscodingService.cpp
+++ b/services/mediatranscoding/MediaTranscodingService.cpp
@@ -16,9 +16,12 @@
 
 //#define LOG_NDEBUG 0
 #define LOG_TAG "MediaTranscodingService"
-#include <MediaTranscodingService.h>
+#include "MediaTranscodingService.h"
+
 #include <android/binder_manager.h>
 #include <android/binder_process.h>
+#include <media/TranscodingClientManager.h>
+#include <media/TranscodingJobScheduler.h>
 #include <private/android_filesystem_config.h>
 #include <utils/Log.h>
 #include <utils/Vector.h>
@@ -45,8 +48,41 @@
     }
 }
 
+// DummyTranscoder and DummyProcessInfo are currently used to instantiate
+// MediaTranscodingService on service side for testing, so that we could
+// actually test the IPC calls of MediaTranscodingService to expose some
+// issues that's observable only over IPC.
+class DummyTranscoder : public TranscoderInterface {
+    void start(int64_t clientId, int32_t jobId) override {
+        (void)clientId;
+        (void)jobId;
+    }
+    void pause(int64_t clientId, int32_t jobId) override {
+        (void)clientId;
+        (void)jobId;
+    }
+    void resume(int64_t clientId, int32_t jobId) override {
+        (void)clientId;
+        (void)jobId;
+    }
+};
+
+class DummyProcessInfo : public ProcessInfoInterface {
+    bool isProcessOnTop(int32_t pid) override {
+        (void)pid;
+        return true;
+    }
+};
+
 MediaTranscodingService::MediaTranscodingService()
-      : mTranscodingClientManager(TranscodingClientManager::getInstance()) {
+      : MediaTranscodingService(std::make_shared<DummyTranscoder>(),
+                                std::make_shared<DummyProcessInfo>()) {}
+
+MediaTranscodingService::MediaTranscodingService(
+        const std::shared_ptr<TranscoderInterface>& transcoder,
+        const std::shared_ptr<ProcessInfoInterface>& procInfo)
+      : mJobScheduler(new TranscodingJobScheduler(transcoder, procInfo)),
+        mClientManager(new TranscodingClientManager(mJobScheduler)) {
     ALOGV("MediaTranscodingService is created");
 }
 
@@ -64,7 +100,7 @@
     write(fd, result.string(), result.size());
 
     Vector<String16> args;
-    mTranscodingClientManager.dumpAllClients(fd, args);
+    mClientManager->dumpAllClients(fd, args);
     return OK;
 }
 
@@ -80,19 +116,20 @@
 }
 
 Status MediaTranscodingService::registerClient(
-        const std::shared_ptr<ITranscodingServiceClient>& in_client,
-        const std::string& in_opPackageName, int32_t in_clientUid, int32_t in_clientPid,
-        int32_t* _aidl_return) {
-    if (in_client == nullptr) {
-        ALOGE("Client can not be null");
-        *_aidl_return = kInvalidJobId;
+        const std::shared_ptr<ITranscodingClientCallback>& in_callback,
+        const std::string& in_clientName, const std::string& in_opPackageName, int32_t in_clientUid,
+        int32_t in_clientPid, std::shared_ptr<ITranscodingClient>* _aidl_return) {
+    if (in_callback == nullptr) {
+        ALOGE("Client callback can not be null");
+        *_aidl_return = nullptr;
         return Status::fromServiceSpecificError(ERROR_ILLEGAL_ARGUMENT);
     }
 
     int32_t callingPid = AIBinder_getCallingPid();
     int32_t callingUid = AIBinder_getCallingUid();
 
-    // Check if we can trust clientUid. Only privilege caller could forward the uid on app client's behalf.
+    // Check if we can trust clientUid. Only privilege caller could forward the
+    // uid on app client's behalf.
     if (in_clientUid == USE_CALLING_UID) {
         in_clientUid = callingUid;
     } else if (!isTrustedCallingUid(callingUid)) {
@@ -106,7 +143,8 @@
                                 in_clientPid, in_clientUid);
     }
 
-    // Check if we can trust clientPid. Only privilege caller could forward the pid on app client's behalf.
+    // Check if we can trust clientPid. Only privilege caller could forward the
+    // pid on app client's behalf.
     if (in_clientPid == USE_CALLING_PID) {
         in_clientPid = callingPid;
     } else if (!isTrustedCallingUid(callingUid)) {
@@ -120,78 +158,23 @@
                                 in_clientPid, in_clientUid);
     }
 
-    // We know the clientId must be equal to its pid as we assigned client's pid as its clientId.
-    int32_t clientId = in_clientPid;
-
-    // Checks if the client already registers.
-    if (mTranscodingClientManager.isClientIdRegistered(clientId)) {
-        return Status::fromServiceSpecificError(ERROR_ALREADY_EXISTS);
-    }
-
     // Creates the client and uses its process id as client id.
-    std::unique_ptr<TranscodingClientManager::ClientInfo> newClient =
-            std::make_unique<TranscodingClientManager::ClientInfo>(
-                    in_client, clientId, in_clientPid, in_clientUid, in_opPackageName);
-    status_t err = mTranscodingClientManager.addClient(std::move(newClient));
+    std::shared_ptr<ITranscodingClient> newClient;
+
+    status_t err = mClientManager->addClient(in_callback, in_clientPid, in_clientUid, in_clientName,
+                                             in_opPackageName, &newClient);
     if (err != OK) {
-        *_aidl_return = kInvalidClientId;
+        *_aidl_return = nullptr;
         return STATUS_ERROR_FMT(err, "Failed to add client to TranscodingClientManager");
     }
 
-    ALOGD("Assign client: %s pid: %d, uid: %d with id: %d", in_opPackageName.c_str(), in_clientPid,
-          in_clientUid, clientId);
-
-    *_aidl_return = clientId;
-    return Status::ok();
-}
-
-Status MediaTranscodingService::unregisterClient(int32_t clientId, bool* _aidl_return) {
-    ALOGD("unregisterClient id: %d", clientId);
-    int32_t callingUid = AIBinder_getCallingUid();
-    int32_t callingPid = AIBinder_getCallingPid();
-
-    // Only the client with clientId or the trusted caller could unregister the client.
-    if (callingPid != clientId) {
-        if (!isTrustedCallingUid(callingUid)) {
-            ALOGE("Untrusted caller (calling PID %d, UID %d) trying to "
-                  "unregister client with id: %d",
-                  callingUid, callingPid, clientId);
-            *_aidl_return = true;
-            return STATUS_ERROR_FMT(ERROR_PERMISSION_DENIED,
-                                    "Untrusted caller (calling PID %d, UID %d) trying to "
-                                    "unregister client with id: %d",
-                                    callingUid, callingPid, clientId);
-        }
-    }
-
-    *_aidl_return = (mTranscodingClientManager.removeClient(clientId) == OK);
+    *_aidl_return = newClient;
     return Status::ok();
 }
 
 Status MediaTranscodingService::getNumOfClients(int32_t* _aidl_return) {
     ALOGD("MediaTranscodingService::getNumOfClients");
-    *_aidl_return = mTranscodingClientManager.getNumOfClients();
-    return Status::ok();
-}
-
-Status MediaTranscodingService::submitRequest(int32_t /*clientId*/,
-                                              const TranscodingRequestParcel& /*request*/,
-                                              TranscodingJobParcel* /*job*/,
-                                              int32_t* /*_aidl_return*/) {
-    // TODO(hkuang): Add implementation.
-    return Status::ok();
-}
-
-Status MediaTranscodingService::cancelJob(int32_t /*in_clientId*/, int32_t /*in_jobId*/,
-                                          bool* /*_aidl_return*/) {
-    // TODO(hkuang): Add implementation.
-    return Status::ok();
-}
-
-Status MediaTranscodingService::getJobWithId(int32_t /*in_jobId*/,
-                                             TranscodingJobParcel* /*out_job*/,
-                                             bool* /*_aidl_return*/) {
-    // TODO(hkuang): Add implementation.
+    *_aidl_return = mClientManager->getNumOfClients();
     return Status::ok();
 }
 
diff --git a/services/mediatranscoding/MediaTranscodingService.h b/services/mediatranscoding/MediaTranscodingService.h
index cc69727..36db9b3 100644
--- a/services/mediatranscoding/MediaTranscodingService.h
+++ b/services/mediatranscoding/MediaTranscodingService.h
@@ -19,15 +19,19 @@
 
 #include <aidl/android/media/BnMediaTranscodingService.h>
 #include <binder/IServiceManager.h>
-#include <media/TranscodingClientManager.h>
 
 namespace android {
 
 using Status = ::ndk::ScopedAStatus;
 using ::aidl::android::media::BnMediaTranscodingService;
-using ::aidl::android::media::ITranscodingServiceClient;
+using ::aidl::android::media::ITranscodingClient;
+using ::aidl::android::media::ITranscodingClientCallback;
 using ::aidl::android::media::TranscodingJobParcel;
 using ::aidl::android::media::TranscodingRequestParcel;
+class TranscodingClientManager;
+class TranscodingJobScheduler;
+class TranscoderInterface;
+class ProcessInfoInterface;
 
 class MediaTranscodingService : public BnMediaTranscodingService {
 public:
@@ -35,28 +39,21 @@
     static constexpr int32_t kInvalidClientId = -1;
 
     MediaTranscodingService();
+    MediaTranscodingService(const std::shared_ptr<TranscoderInterface>& transcoder,
+                            const std::shared_ptr<ProcessInfoInterface>& procInfo);
     virtual ~MediaTranscodingService();
 
     static void instantiate();
 
     static const char* getServiceName() { return "media.transcoding"; }
 
-    Status registerClient(const std::shared_ptr<ITranscodingServiceClient>& in_client,
-                          const std::string& in_opPackageName, int32_t in_clientUid,
-                          int32_t in_clientPid, int32_t* _aidl_return) override;
-
-    Status unregisterClient(int32_t clientId, bool* _aidl_return) override;
+    Status registerClient(const std::shared_ptr<ITranscodingClientCallback>& in_callback,
+                          const std::string& in_clientName, const std::string& in_opPackageName,
+                          int32_t in_clientUid, int32_t in_clientPid,
+                          std::shared_ptr<ITranscodingClient>* _aidl_return) override;
 
     Status getNumOfClients(int32_t* _aidl_return) override;
 
-    Status submitRequest(int32_t in_clientId, const TranscodingRequestParcel& in_request,
-                         TranscodingJobParcel* out_job, int32_t* _aidl_return) override;
-
-    Status cancelJob(int32_t in_clientId, int32_t in_jobId, bool* _aidl_return) override;
-
-    Status getJobWithId(int32_t in_jobId, TranscodingJobParcel* out_job,
-                        bool* _aidl_return) override;
-
     virtual inline binder_status_t dump(int /*fd*/, const char** /*args*/, uint32_t /*numArgs*/);
 
 private:
@@ -64,7 +61,8 @@
 
     mutable std::mutex mServiceLock;
 
-    TranscodingClientManager& mTranscodingClientManager;
+    std::shared_ptr<TranscodingJobScheduler> mJobScheduler;
+    std::shared_ptr<TranscodingClientManager> mClientManager;
 };
 
 }  // namespace android
diff --git a/services/mediatranscoding/tests/build_and_run_all_unit_tests.sh b/services/mediatranscoding/tests/build_and_run_all_unit_tests.sh
index bcdc7f7..ce017d7 100644
--- a/services/mediatranscoding/tests/build_and_run_all_unit_tests.sh
+++ b/services/mediatranscoding/tests/build_and_run_all_unit_tests.sh
@@ -20,4 +20,5 @@
 echo "========================================"
 
 echo "testing mediatranscodingservice"
-adb shell /data/nativetest64/mediatranscodingservice_tests/mediatranscodingservice_tests
+#adb shell /data/nativetest64/mediatranscodingservice_tests/mediatranscodingservice_tests
+adb shell /data/nativetest/mediatranscodingservice_tests/mediatranscodingservice_tests
diff --git a/services/mediatranscoding/tests/mediatranscodingservice_tests.cpp b/services/mediatranscoding/tests/mediatranscodingservice_tests.cpp
index 5a791fe..351f830 100644
--- a/services/mediatranscoding/tests/mediatranscodingservice_tests.cpp
+++ b/services/mediatranscoding/tests/mediatranscodingservice_tests.cpp
@@ -14,14 +14,17 @@
  * limitations under the License.
  */
 
-// Unit Test for MediaTranscoding Service.
+// Unit Test for MediaTranscodingService.
 
 //#define LOG_NDEBUG 0
 #define LOG_TAG "MediaTranscodingServiceTest"
 
-#include <aidl/android/media/BnTranscodingServiceClient.h>
+#include <aidl/android/media/BnTranscodingClientCallback.h>
 #include <aidl/android/media/IMediaTranscodingService.h>
-#include <aidl/android/media/ITranscodingServiceClient.h>
+#include <aidl/android/media/ITranscodingClient.h>
+#include <aidl/android/media/ITranscodingClientCallback.h>
+#include <aidl/android/media/TranscodingJobParcel.h>
+#include <aidl/android/media/TranscodingRequestParcel.h>
 #include <android-base/logging.h>
 #include <android-base/unique_fd.h>
 #include <android/binder_ibinder_jni.h>
@@ -38,49 +41,28 @@
 namespace media {
 
 using Status = ::ndk::ScopedAStatus;
-using aidl::android::media::BnTranscodingServiceClient;
+using aidl::android::media::BnTranscodingClientCallback;
 using aidl::android::media::IMediaTranscodingService;
-using aidl::android::media::ITranscodingServiceClient;
-
-constexpr int32_t kInvalidClientId = -5;
+using aidl::android::media::ITranscodingClient;
+using aidl::android::media::ITranscodingClientCallback;
+using aidl::android::media::TranscodingJobParcel;
+using aidl::android::media::TranscodingRequestParcel;
 
 // Note that -1 is valid and means using calling pid/uid for the service. But only privilege caller could
 // use them. This test is not a privilege caller.
 constexpr int32_t kInvalidClientPid = -5;
-constexpr int32_t kInvalidClientUid = -5;
+constexpr const char* kInvalidClientName = "";
 constexpr const char* kInvalidClientOpPackageName = "";
 
-constexpr int32_t kClientUseCallingPid = -1;
-constexpr int32_t kClientUseCallingUid = -1;
-constexpr const char* kClientOpPackageName = "TestClient";
+constexpr int32_t kClientUseCallingPid = IMediaTranscodingService::USE_CALLING_PID;
+constexpr int32_t kClientUseCallingUid = IMediaTranscodingService::USE_CALLING_UID;
+constexpr const char* kClientName = "TestClient";
+constexpr const char* kClientOpPackageName = "TestClientPackage";
 
-class MediaTranscodingServiceTest : public ::testing::Test {
-public:
-    MediaTranscodingServiceTest() { ALOGD("MediaTranscodingServiceTest created"); }
+struct TestClient : public BnTranscodingClientCallback {
+    TestClient() { ALOGD("TestClient Created"); }
 
-    void SetUp() override {
-        ::ndk::SpAIBinder binder(AServiceManager_getService("media.transcoding"));
-        mService = IMediaTranscodingService::fromBinder(binder);
-        if (mService == nullptr) {
-            ALOGE("Failed to connect to the media.trascoding service.");
-            return;
-        }
-    }
-
-    ~MediaTranscodingServiceTest() { ALOGD("MediaTranscodingingServiceTest destroyed"); }
-
-    std::shared_ptr<IMediaTranscodingService> mService = nullptr;
-};
-
-struct TestClient : public BnTranscodingServiceClient {
-    TestClient(const std::shared_ptr<IMediaTranscodingService>& service) : mService(service) {
-        ALOGD("TestClient Created");
-    }
-
-    Status getName(std::string* _aidl_return) override {
-        *_aidl_return = "test_client";
-        return Status::ok();
-    }
+    virtual ~TestClient() { ALOGI("TestClient destroyed"); }
 
     Status onTranscodingFinished(
             int32_t /* in_jobId */,
@@ -102,71 +84,125 @@
     Status onProgressUpdate(int32_t /* in_jobId */, int32_t /* in_progress */) override {
         return Status::ok();
     }
+};
 
-    virtual ~TestClient() { ALOGI("TestClient destroyed"); };
+class MediaTranscodingServiceTest : public ::testing::Test {
+public:
+    MediaTranscodingServiceTest() { ALOGD("MediaTranscodingServiceTest created"); }
 
-private:
+    ~MediaTranscodingServiceTest() { ALOGD("MediaTranscodingingServiceTest destroyed"); }
+
+    void SetUp() override {
+        ::ndk::SpAIBinder binder(AServiceManager_getService("media.transcoding"));
+        mService = IMediaTranscodingService::fromBinder(binder);
+        if (mService == nullptr) {
+            ALOGE("Failed to connect to the media.trascoding service.");
+            return;
+        }
+        mClientCallback = ::ndk::SharedRefBase::make<TestClient>();
+        mClientCallback2 = ::ndk::SharedRefBase::make<TestClient>();
+        mClientCallback3 = ::ndk::SharedRefBase::make<TestClient>();
+    }
+
+    void registerMultipleClients() {
+        // Register 3 clients.
+        Status status =
+                mService->registerClient(mClientCallback, kClientName, kClientOpPackageName,
+                                         kClientUseCallingUid, kClientUseCallingPid, &mClient1);
+        EXPECT_TRUE(status.isOk());
+        EXPECT_TRUE(mClient1 != nullptr);
+
+        status = mService->registerClient(mClientCallback2, kClientName, kClientOpPackageName,
+                                          kClientUseCallingUid, kClientUseCallingPid, &mClient2);
+        EXPECT_TRUE(status.isOk());
+        EXPECT_TRUE(mClient2 != nullptr);
+
+        status = mService->registerClient(mClientCallback3, kClientName, kClientOpPackageName,
+                                          kClientUseCallingUid, kClientUseCallingPid, &mClient3);
+        EXPECT_TRUE(status.isOk());
+        EXPECT_TRUE(mClient3 != nullptr);
+
+        // Check the number of clients.
+        int32_t numOfClients;
+        status = mService->getNumOfClients(&numOfClients);
+        EXPECT_TRUE(status.isOk());
+        EXPECT_EQ(3, numOfClients);
+    }
+
+    void unregisterMultipleClients() {
+        // Unregister the clients.
+        Status status = mClient1->unregister();
+        EXPECT_TRUE(status.isOk());
+
+        status = mClient2->unregister();
+        EXPECT_TRUE(status.isOk());
+
+        status = mClient3->unregister();
+        EXPECT_TRUE(status.isOk());
+
+        // Check the number of clients.
+        int32_t numOfClients;
+        status = mService->getNumOfClients(&numOfClients);
+        EXPECT_TRUE(status.isOk());
+        EXPECT_EQ(0, numOfClients);
+    }
+
     std::shared_ptr<IMediaTranscodingService> mService;
+    std::shared_ptr<ITranscodingClientCallback> mClientCallback;
+    std::shared_ptr<ITranscodingClientCallback> mClientCallback2;
+    std::shared_ptr<ITranscodingClientCallback> mClientCallback3;
+    std::shared_ptr<ITranscodingClient> mClient1;
+    std::shared_ptr<ITranscodingClient> mClient2;
+    std::shared_ptr<ITranscodingClient> mClient3;
 };
 
 TEST_F(MediaTranscodingServiceTest, TestRegisterNullClient) {
-    std::shared_ptr<ITranscodingServiceClient> client = nullptr;
-    int32_t clientId = 0;
-    Status status = mService->registerClient(client, kClientOpPackageName, kClientUseCallingUid,
-                                             kClientUseCallingPid, &clientId);
+    std::shared_ptr<ITranscodingClient> client;
+
+    // Register the client with null callback.
+    Status status = mService->registerClient(nullptr, kClientName, kClientOpPackageName,
+                                             kClientUseCallingUid, kClientUseCallingPid, &client);
     EXPECT_FALSE(status.isOk());
 }
 
 TEST_F(MediaTranscodingServiceTest, TestRegisterClientWithInvalidClientPid) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-    EXPECT_TRUE(client != nullptr);
+    std::shared_ptr<ITranscodingClient> client;
 
     // Register the client with the service.
-    int32_t clientId = 0;
-    Status status = mService->registerClient(client, kClientOpPackageName, kClientUseCallingUid,
-                                             kInvalidClientPid, &clientId);
+    Status status = mService->registerClient(mClientCallback, kClientName, kClientOpPackageName,
+                                             kClientUseCallingUid, kInvalidClientPid, &client);
     EXPECT_FALSE(status.isOk());
 }
 
-TEST_F(MediaTranscodingServiceTest, TestRegisterClientWithInvalidClientUid) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-    EXPECT_TRUE(client != nullptr);
+TEST_F(MediaTranscodingServiceTest, TestRegisterClientWithInvalidClientName) {
+    std::shared_ptr<ITranscodingClient> client;
 
     // Register the client with the service.
-    int32_t clientId = 0;
-    Status status = mService->registerClient(client, kClientOpPackageName, kInvalidClientUid,
-                                             kClientUseCallingPid, &clientId);
+    Status status = mService->registerClient(mClientCallback, kInvalidClientName,
+                                             kInvalidClientOpPackageName, kClientUseCallingUid,
+                                             kClientUseCallingPid, &client);
     EXPECT_FALSE(status.isOk());
 }
 
 TEST_F(MediaTranscodingServiceTest, TestRegisterClientWithInvalidClientPackageName) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-    EXPECT_TRUE(client != nullptr);
+    std::shared_ptr<ITranscodingClient> client;
 
     // Register the client with the service.
-    int32_t clientId = 0;
-    Status status = mService->registerClient(client, kInvalidClientOpPackageName,
-                                             kClientUseCallingUid, kClientUseCallingPid, &clientId);
+    Status status =
+            mService->registerClient(mClientCallback, kClientName, kInvalidClientOpPackageName,
+                                     kClientUseCallingUid, kClientUseCallingPid, &client);
     EXPECT_FALSE(status.isOk());
 }
 
 TEST_F(MediaTranscodingServiceTest, TestRegisterOneClient) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-    EXPECT_TRUE(client != nullptr);
+    std::shared_ptr<ITranscodingClient> client;
 
-    // Register the client with the service.
-    int32_t clientId = 0;
-    Status status = mService->registerClient(client, kClientOpPackageName, kClientUseCallingPid,
-                                             kClientUseCallingUid, &clientId);
-    ALOGD("client id is %d", clientId);
+    Status status = mService->registerClient(mClientCallback, kClientName, kClientOpPackageName,
+                                             kClientUseCallingUid, kClientUseCallingPid, &client);
     EXPECT_TRUE(status.isOk());
 
-    // Validate the clientId.
-    EXPECT_TRUE(clientId > 0);
+    // Validate the client.
+    EXPECT_TRUE(client != nullptr);
 
     // Check the number of Clients.
     int32_t numOfClients;
@@ -175,64 +211,110 @@
     EXPECT_EQ(1, numOfClients);
 
     // Unregister the client.
-    bool res;
-    status = mService->unregisterClient(clientId, &res);
+    status = client->unregister();
     EXPECT_TRUE(status.isOk());
-    EXPECT_TRUE(res);
-}
-
-TEST_F(MediaTranscodingServiceTest, TestUnRegisterClientWithInvalidClientId) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-    EXPECT_TRUE(client != nullptr);
-
-    // Register the client with the service.
-    int32_t clientId = 0;
-    Status status = mService->registerClient(client, kClientOpPackageName, kClientUseCallingUid,
-                                             kClientUseCallingPid, &clientId);
-    ALOGD("client id is %d", clientId);
-    EXPECT_TRUE(status.isOk());
-
-    // Validate the clientId.
-    EXPECT_TRUE(clientId > 0);
 
     // Check the number of Clients.
-    int32_t numOfClients;
     status = mService->getNumOfClients(&numOfClients);
     EXPECT_TRUE(status.isOk());
-    EXPECT_EQ(1, numOfClients);
-
-    // Unregister the client with invalid ID
-    bool res;
-    mService->unregisterClient(kInvalidClientId, &res);
-    EXPECT_FALSE(res);
-
-    // Unregister the valid client.
-    mService->unregisterClient(clientId, &res);
+    EXPECT_EQ(0, numOfClients);
 }
 
 TEST_F(MediaTranscodingServiceTest, TestRegisterClientTwice) {
-    std::shared_ptr<ITranscodingServiceClient> client =
-            ::ndk::SharedRefBase::make<TestClient>(mService);
-    EXPECT_TRUE(client != nullptr);
+    std::shared_ptr<ITranscodingClient> client;
 
-    // Register the client with the service.
-    int32_t clientId = 0;
-    Status status = mService->registerClient(client, kClientOpPackageName, kClientUseCallingUid,
-                                             kClientUseCallingPid, &clientId);
+    Status status = mService->registerClient(mClientCallback, kClientName, kClientOpPackageName,
+                                             kClientUseCallingUid, kClientUseCallingPid, &client);
     EXPECT_TRUE(status.isOk());
 
-    // Validate the clientId.
-    EXPECT_TRUE(clientId > 0);
+    // Validate the client.
+    EXPECT_TRUE(client != nullptr);
 
     // Register the client again and expects failure.
-    status = mService->registerClient(client, kClientOpPackageName, kClientUseCallingUid,
-                                      kClientUseCallingPid, &clientId);
+    std::shared_ptr<ITranscodingClient> client1;
+    status = mService->registerClient(mClientCallback, kClientName, kClientOpPackageName,
+                                      kClientUseCallingUid, kClientUseCallingPid, &client1);
     EXPECT_FALSE(status.isOk());
 
-    // Unregister the valid client.
-    bool res;
-    mService->unregisterClient(clientId, &res);
+    // Unregister the client.
+    status = client->unregister();
+    EXPECT_TRUE(status.isOk());
+}
+
+TEST_F(MediaTranscodingServiceTest, TestRegisterMultipleClients) {
+    registerMultipleClients();
+    unregisterMultipleClients();
+}
+
+TEST_F(MediaTranscodingServiceTest, TestSubmitCancelGetJobs) {
+    registerMultipleClients();
+
+    // Test jobId assignment.
+    TranscodingRequestParcel request;
+    request.fileName = "test_file_0";
+    TranscodingJobParcel job;
+    bool result;
+    EXPECT_TRUE(mClient1->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 0);
+
+    request.fileName = "test_file_1";
+    EXPECT_TRUE(mClient1->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 1);
+
+    request.fileName = "test_file_2";
+    EXPECT_TRUE(mClient1->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 2);
+
+    // Test submit bad request (no valid fileName) fails.
+    TranscodingRequestParcel badRequest;
+    EXPECT_TRUE(mClient1->submitRequest(badRequest, &job, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test get jobs by id.
+    EXPECT_TRUE(mClient1->getJobWithId(2, &job, &result).isOk());
+    EXPECT_EQ(job.jobId, 2);
+    EXPECT_EQ(job.request.fileName, "test_file_2");
+    EXPECT_TRUE(result);
+
+    // Test get jobs by invalid id fails.
+    EXPECT_TRUE(mClient1->getJobWithId(100, &job, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test cancel non-existent job fail.
+    EXPECT_TRUE(mClient2->cancelJob(100, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test cancel valid jobId in arbitrary order.
+    EXPECT_TRUE(mClient1->cancelJob(2, &result).isOk());
+    EXPECT_TRUE(result);
+
+    EXPECT_TRUE(mClient1->cancelJob(0, &result).isOk());
+    EXPECT_TRUE(result);
+
+    EXPECT_TRUE(mClient1->cancelJob(1, &result).isOk());
+    EXPECT_TRUE(result);
+
+    // Test cancel job again fails.
+    EXPECT_TRUE(mClient1->cancelJob(1, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test get job after cancel fails.
+    EXPECT_TRUE(mClient1->getJobWithId(2, &job, &result).isOk());
+    EXPECT_FALSE(result);
+
+    // Test jobId independence for each client.
+    EXPECT_TRUE(mClient2->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 0);
+
+    EXPECT_TRUE(mClient2->submitRequest(request, &job, &result).isOk());
+    EXPECT_TRUE(result);
+    EXPECT_EQ(job.jobId, 1);
+
+    unregisterMultipleClients();
 }
 
 }  // namespace media