Jerry Zhang | df69dd3 | 2017-05-03 17:17:49 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2017 The Android Open Source Project |
| 3 | * |
| 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | * you may not use this file except in compliance with the License. |
| 6 | * You may obtain a copy of the License at |
| 7 | * |
| 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | * |
| 10 | * Unless required by applicable law or agreed to in writing, software |
| 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | * See the License for the specific language governing permissions and |
| 14 | * limitations under the License. |
| 15 | */ |
| 16 | |
| 17 | #include <android-base/logging.h> |
| 18 | #include <android-base/properties.h> |
| 19 | #include <dirent.h> |
| 20 | #include <errno.h> |
| 21 | #include <fcntl.h> |
| 22 | #include <linux/usb/ch9.h> |
| 23 | #include <linux/usb/functionfs.h> |
| 24 | #include <mutex> |
| 25 | #include <stdio.h> |
| 26 | #include <stdlib.h> |
| 27 | #include <string.h> |
| 28 | #include <sys/endian.h> |
| 29 | #include <sys/ioctl.h> |
| 30 | #include <sys/mman.h> |
| 31 | #include <sys/stat.h> |
| 32 | #include <sys/types.h> |
| 33 | #include <unistd.h> |
| 34 | |
| 35 | #include "PosixAsyncIO.h" |
| 36 | #include "MtpFfsCompatHandle.h" |
| 37 | #include "mtp.h" |
| 38 | |
| 39 | #define FUNCTIONFS_ENDPOINT_ALLOC _IOR('g', 231, __u32) |
| 40 | |
| 41 | namespace { |
| 42 | |
| 43 | // Must be divisible by all max packet size values |
| 44 | constexpr int MAX_FILE_CHUNK_SIZE = 3145728; |
| 45 | |
| 46 | // Safe values since some devices cannot handle large DMAs |
| 47 | // To get good performance, override these with |
| 48 | // higher values per device using the properties |
| 49 | // sys.usb.ffs.max_read and sys.usb.ffs.max_write |
| 50 | constexpr int USB_FFS_MAX_WRITE = MTP_BUFFER_SIZE; |
| 51 | constexpr int USB_FFS_MAX_READ = MTP_BUFFER_SIZE; |
| 52 | |
| 53 | static_assert(USB_FFS_MAX_WRITE > 0, "Max r/w values must be > 0!"); |
| 54 | static_assert(USB_FFS_MAX_READ > 0, "Max r/w values must be > 0!"); |
| 55 | |
| 56 | constexpr unsigned int MAX_MTP_FILE_SIZE = 0xFFFFFFFF; |
| 57 | |
| 58 | constexpr size_t ENDPOINT_ALLOC_RETRIES = 10; |
| 59 | |
| 60 | } // anonymous namespace |
| 61 | |
| 62 | namespace android { |
| 63 | |
Jerry Zhang | 63dac45 | 2017-12-06 15:19:36 -0800 | [diff] [blame] | 64 | MtpFfsCompatHandle::MtpFfsCompatHandle(int controlFd) : |
| 65 | MtpFfsHandle(controlFd), |
Jerry Zhang | df69dd3 | 2017-05-03 17:17:49 -0700 | [diff] [blame] | 66 | mMaxWrite(USB_FFS_MAX_WRITE), |
| 67 | mMaxRead(USB_FFS_MAX_READ) {} |
| 68 | |
| 69 | MtpFfsCompatHandle::~MtpFfsCompatHandle() {} |
| 70 | |
| 71 | int MtpFfsCompatHandle::writeHandle(int fd, const void* data, size_t len) { |
| 72 | int ret = 0; |
| 73 | const char* buf = static_cast<const char*>(data); |
| 74 | while (len > 0) { |
| 75 | int write_len = std::min(mMaxWrite, len); |
| 76 | int n = TEMP_FAILURE_RETRY(::write(fd, buf, write_len)); |
| 77 | |
| 78 | if (n < 0) { |
| 79 | PLOG(ERROR) << "write ERROR: fd = " << fd << ", n = " << n; |
| 80 | return -1; |
| 81 | } else if (n < write_len) { |
| 82 | errno = EIO; |
| 83 | PLOG(ERROR) << "less written than expected"; |
| 84 | return -1; |
| 85 | } |
| 86 | buf += n; |
| 87 | len -= n; |
| 88 | ret += n; |
| 89 | } |
| 90 | return ret; |
| 91 | } |
| 92 | |
| 93 | int MtpFfsCompatHandle::readHandle(int fd, void* data, size_t len) { |
| 94 | int ret = 0; |
| 95 | char* buf = static_cast<char*>(data); |
| 96 | while (len > 0) { |
| 97 | int read_len = std::min(mMaxRead, len); |
| 98 | int n = TEMP_FAILURE_RETRY(::read(fd, buf, read_len)); |
| 99 | if (n < 0) { |
| 100 | PLOG(ERROR) << "read ERROR: fd = " << fd << ", n = " << n; |
| 101 | return -1; |
| 102 | } |
| 103 | ret += n; |
| 104 | if (n < read_len) // done reading early |
| 105 | break; |
| 106 | buf += n; |
| 107 | len -= n; |
| 108 | } |
| 109 | return ret; |
| 110 | } |
| 111 | |
Jerry Zhang | 63dac45 | 2017-12-06 15:19:36 -0800 | [diff] [blame] | 112 | int MtpFfsCompatHandle::start(bool ptp) { |
| 113 | if (!openEndpoints(ptp)) |
Jerry Zhang | df69dd3 | 2017-05-03 17:17:49 -0700 | [diff] [blame] | 114 | return -1; |
| 115 | |
| 116 | for (unsigned i = 0; i < NUM_IO_BUFS; i++) { |
| 117 | mIobuf[i].bufs.resize(MAX_FILE_CHUNK_SIZE); |
| 118 | posix_madvise(mIobuf[i].bufs.data(), MAX_FILE_CHUNK_SIZE, |
| 119 | POSIX_MADV_SEQUENTIAL | POSIX_MADV_WILLNEED); |
| 120 | } |
| 121 | |
| 122 | // Get device specific r/w size |
| 123 | mMaxWrite = android::base::GetIntProperty("sys.usb.ffs.max_write", USB_FFS_MAX_WRITE); |
| 124 | mMaxRead = android::base::GetIntProperty("sys.usb.ffs.max_read", USB_FFS_MAX_READ); |
| 125 | |
| 126 | size_t attempts = 0; |
| 127 | while (mMaxWrite >= USB_FFS_MAX_WRITE && mMaxRead >= USB_FFS_MAX_READ && |
| 128 | attempts < ENDPOINT_ALLOC_RETRIES) { |
| 129 | // If larger contiguous chunks of memory aren't available, attempt to try |
| 130 | // smaller allocations. |
| 131 | if (ioctl(mBulkIn, FUNCTIONFS_ENDPOINT_ALLOC, static_cast<__u32>(mMaxWrite)) || |
| 132 | ioctl(mBulkOut, FUNCTIONFS_ENDPOINT_ALLOC, static_cast<__u32>(mMaxRead))) { |
| 133 | if (errno == ENODEV) { |
| 134 | // Driver hasn't enabled endpoints yet. |
| 135 | std::this_thread::sleep_for(std::chrono::milliseconds(100)); |
| 136 | attempts += 1; |
| 137 | continue; |
| 138 | } |
| 139 | mMaxWrite /= 2; |
| 140 | mMaxRead /=2; |
| 141 | } else { |
| 142 | return 0; |
| 143 | } |
| 144 | } |
| 145 | // Try to start MtpServer anyway, with the smallest max r/w values |
| 146 | mMaxWrite = USB_FFS_MAX_WRITE; |
| 147 | mMaxRead = USB_FFS_MAX_READ; |
| 148 | PLOG(ERROR) << "Functionfs could not allocate any memory!"; |
| 149 | return 0; |
| 150 | } |
| 151 | |
| 152 | int MtpFfsCompatHandle::read(void* data, size_t len) { |
| 153 | return readHandle(mBulkOut, data, len); |
| 154 | } |
| 155 | |
| 156 | int MtpFfsCompatHandle::write(const void* data, size_t len) { |
| 157 | return writeHandle(mBulkIn, data, len); |
| 158 | } |
| 159 | |
| 160 | int MtpFfsCompatHandle::receiveFile(mtp_file_range mfr, bool zero_packet) { |
| 161 | // When receiving files, the incoming length is given in 32 bits. |
| 162 | // A >4G file is given as 0xFFFFFFFF |
| 163 | uint32_t file_length = mfr.length; |
| 164 | uint64_t offset = mfr.offset; |
| 165 | int packet_size = getPacketSize(mBulkOut); |
| 166 | |
| 167 | unsigned char *data = mIobuf[0].bufs.data(); |
| 168 | unsigned char *data2 = mIobuf[1].bufs.data(); |
| 169 | |
| 170 | struct aiocb aio; |
| 171 | aio.aio_fildes = mfr.fd; |
| 172 | aio.aio_buf = nullptr; |
| 173 | struct aiocb *aiol[] = {&aio}; |
| 174 | int ret = -1; |
| 175 | size_t length; |
| 176 | bool read = false; |
| 177 | bool write = false; |
| 178 | |
| 179 | posix_fadvise(mfr.fd, 0, 0, POSIX_FADV_SEQUENTIAL | POSIX_FADV_NOREUSE); |
| 180 | |
| 181 | // Break down the file into pieces that fit in buffers |
| 182 | while (file_length > 0 || write) { |
| 183 | if (file_length > 0) { |
| 184 | length = std::min(static_cast<uint32_t>(MAX_FILE_CHUNK_SIZE), file_length); |
| 185 | |
| 186 | // Read data from USB, handle errors after waiting for write thread. |
| 187 | ret = readHandle(mBulkOut, data, length); |
| 188 | |
| 189 | if (file_length != MAX_MTP_FILE_SIZE && ret < static_cast<int>(length)) { |
| 190 | ret = -1; |
| 191 | errno = EIO; |
| 192 | } |
| 193 | read = true; |
| 194 | } |
| 195 | |
| 196 | if (write) { |
| 197 | // get the return status of the last write request |
| 198 | aio_suspend(aiol, 1, nullptr); |
| 199 | |
| 200 | int written = aio_return(&aio); |
| 201 | if (written == -1) { |
| 202 | errno = aio_error(&aio); |
| 203 | return -1; |
| 204 | } |
| 205 | if (static_cast<size_t>(written) < aio.aio_nbytes) { |
| 206 | errno = EIO; |
| 207 | return -1; |
| 208 | } |
| 209 | write = false; |
| 210 | } |
| 211 | |
| 212 | // If there was an error reading above |
| 213 | if (ret == -1) { |
| 214 | return -1; |
| 215 | } |
| 216 | |
| 217 | if (read) { |
| 218 | if (file_length == MAX_MTP_FILE_SIZE) { |
| 219 | // For larger files, receive until a short packet is received. |
| 220 | if (static_cast<size_t>(ret) < length) { |
| 221 | file_length = 0; |
| 222 | } |
| 223 | } else { |
| 224 | file_length -= ret; |
| 225 | } |
| 226 | // Enqueue a new write request |
| 227 | aio_prepare(&aio, data, length, offset); |
| 228 | aio_write(&aio); |
| 229 | |
| 230 | offset += ret; |
| 231 | std::swap(data, data2); |
| 232 | |
| 233 | write = true; |
| 234 | read = false; |
| 235 | } |
| 236 | } |
| 237 | // Receive an empty packet if size is a multiple of the endpoint size. |
| 238 | if (ret % packet_size == 0 || zero_packet) { |
| 239 | if (TEMP_FAILURE_RETRY(::read(mBulkOut, data, packet_size)) != 0) { |
| 240 | return -1; |
| 241 | } |
| 242 | } |
| 243 | return 0; |
| 244 | } |
| 245 | |
| 246 | int MtpFfsCompatHandle::sendFile(mtp_file_range mfr) { |
| 247 | uint64_t file_length = mfr.length; |
| 248 | uint32_t given_length = std::min(static_cast<uint64_t>(MAX_MTP_FILE_SIZE), |
| 249 | file_length + sizeof(mtp_data_header)); |
| 250 | uint64_t offset = mfr.offset; |
| 251 | int packet_size = getPacketSize(mBulkIn); |
| 252 | |
| 253 | // If file_length is larger than a size_t, truncating would produce the wrong comparison. |
| 254 | // Instead, promote the left side to 64 bits, then truncate the small result. |
| 255 | int init_read_len = std::min( |
| 256 | static_cast<uint64_t>(packet_size - sizeof(mtp_data_header)), file_length); |
| 257 | |
| 258 | unsigned char *data = mIobuf[0].bufs.data(); |
| 259 | unsigned char *data2 = mIobuf[1].bufs.data(); |
| 260 | |
| 261 | posix_fadvise(mfr.fd, 0, 0, POSIX_FADV_SEQUENTIAL | POSIX_FADV_NOREUSE); |
| 262 | |
| 263 | struct aiocb aio; |
| 264 | aio.aio_fildes = mfr.fd; |
| 265 | struct aiocb *aiol[] = {&aio}; |
| 266 | int ret, length; |
| 267 | int error = 0; |
| 268 | bool read = false; |
| 269 | bool write = false; |
| 270 | |
| 271 | // Send the header data |
| 272 | mtp_data_header *header = reinterpret_cast<mtp_data_header*>(data); |
| 273 | header->length = htole32(given_length); |
| 274 | header->type = htole16(2); /* data packet */ |
| 275 | header->command = htole16(mfr.command); |
| 276 | header->transaction_id = htole32(mfr.transaction_id); |
| 277 | |
| 278 | // Some hosts don't support header/data separation even though MTP allows it |
| 279 | // Handle by filling first packet with initial file data |
| 280 | if (TEMP_FAILURE_RETRY(pread(mfr.fd, reinterpret_cast<char*>(data) + |
| 281 | sizeof(mtp_data_header), init_read_len, offset)) |
| 282 | != init_read_len) return -1; |
| 283 | if (writeHandle(mBulkIn, data, sizeof(mtp_data_header) + init_read_len) == -1) return -1; |
| 284 | file_length -= init_read_len; |
| 285 | offset += init_read_len; |
| 286 | ret = init_read_len + sizeof(mtp_data_header); |
| 287 | |
| 288 | // Break down the file into pieces that fit in buffers |
| 289 | while (file_length > 0) { |
| 290 | if (read) { |
| 291 | // Wait for the previous read to finish |
| 292 | aio_suspend(aiol, 1, nullptr); |
| 293 | ret = aio_return(&aio); |
| 294 | if (ret == -1) { |
| 295 | errno = aio_error(&aio); |
| 296 | return -1; |
| 297 | } |
| 298 | if (static_cast<size_t>(ret) < aio.aio_nbytes) { |
| 299 | errno = EIO; |
| 300 | return -1; |
| 301 | } |
| 302 | |
| 303 | file_length -= ret; |
| 304 | offset += ret; |
| 305 | std::swap(data, data2); |
| 306 | read = false; |
| 307 | write = true; |
| 308 | } |
| 309 | |
| 310 | if (error == -1) { |
| 311 | return -1; |
| 312 | } |
| 313 | |
| 314 | if (file_length > 0) { |
| 315 | length = std::min(static_cast<uint64_t>(MAX_FILE_CHUNK_SIZE), file_length); |
| 316 | // Queue up another read |
| 317 | aio_prepare(&aio, data, length, offset); |
| 318 | aio_read(&aio); |
| 319 | read = true; |
| 320 | } |
| 321 | |
| 322 | if (write) { |
| 323 | if (writeHandle(mBulkIn, data2, ret) == -1) { |
| 324 | error = -1; |
| 325 | } |
| 326 | write = false; |
| 327 | } |
| 328 | } |
| 329 | |
| 330 | if (ret % packet_size == 0) { |
| 331 | // If the last packet wasn't short, send a final empty packet |
| 332 | if (TEMP_FAILURE_RETRY(::write(mBulkIn, data, 0)) != 0) { |
| 333 | return -1; |
| 334 | } |
| 335 | } |
| 336 | |
| 337 | return 0; |
| 338 | } |
| 339 | |
| 340 | } // namespace android |
| 341 | |