blob: 7443c53205de4e1b46b7304050f98345194bd690 [file] [log] [blame]
preludedrewf4ed1b62010-12-30 20:53:51 -07001/*
2 * Copyright 2001-2008 Texas Instruments - http://www.ti.com/
3 *
4 * Licensed under the Apache License, Version 2.0 (the "License");
5 * you may not use this file except in compliance with the License.
6 * You may obtain a copy of the License at
7 *
8 * http://www.apache.org/licenses/LICENSE-2.0
9 *
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
15 */
16
17
18/*
19 * ======== cmmdefs.h ========
20 * DSP-BIOS Bridge driver support functions for TI OMAP processors.
21 * Purpose:
22 * Global MEM constants and types.
23 *
24 *! Revision History:
25 *! ================
26 *! 12-Nov-2001 ag CMM_KERNMAPTYPE added for dsp<->device process addr map'n.
27 *! This allows addr conversion from drvr process <-> DSP addr.
28 *! 29-Aug-2001 ag Added CMM_ALLSEGMENTS.
29 *! 08-Dec-2000 ag Added bus address conversion type CMM_POMAPEMIF2DSPBUS.
30 *! 05-Dec-2000 ag Added default CMM_DEFLTCONVFACTOR & CMM_DEFLTDSPADDROFFSET.
31 *! 29-Oct-2000 ag Added converstion factor for GPP DSP Pa translation.
32 *! 15-Oct-2000 ag Added address translator attributes and defaults.
33 *! 12-Jul-2000 ag Created.
34 */
35
36#ifndef CMMDEFS_
37#define CMMDEFS_
38
39#ifdef __cplusplus
40extern "C" {
41#endif
42
43#include <list.h>
44
45/* Cmm attributes used in CMM_Create() */
46 struct CMM_MGRATTRS {
47 ULONG ulMinBlockSize; /* Minimum SM allocation; default 32 bytes. */
48 };
49
50/* Attributes for CMM_AllocBuf() & CMM_AllocDesc() */
51 struct CMM_ATTRS {
52 ULONG ulSegId; /* 1,2... are SM segments. 0 is not. */
53 ULONG ulAlignment; /* 0,1,2,4....ulMinBlockSize */
54 } ;
55
56/*
57 * DSPPa to GPPPa Conversion Factor.
58 *
59 * For typical platforms:
60 * converted Address = PaDSP + ( cFactor * addressToConvert).
61 */
62 typedef enum {
63 CMM_SUBFROMDSPPA = -1,
64 CMM_POMAPEMIF2DSPBUS = 0, /* PreOMAP is special case: not simple offset */
65 CMM_ADDTODSPPA = 1
66 } CMM_CNVTTYPE;
67
68#define CMM_DEFLTDSPADDROFFSET 0
69#define CMM_DEFLTCONVFACTOR CMM_POMAPEMIF2DSPBUS /* PreOMAP DSPBUS<->EMIF */
70#define CMM_ALLSEGMENTS 0xFFFFFF /* All SegIds */
71#define CMM_MAXGPPSEGS 1 /* Maximum # of SM segs */
72
73/*
74 * SMSEGs are SM segments the DSP allocates from.
75 *
76 * This info is used by the GPP to xlate DSP allocated PAs.
77 */
78 struct CMM_SMSEG {
79 DWORD dwSMBasePA; /* Physical SM Base address(GPP). */
80 ULONG ulTotalSizePA; /* Size of SM segment in GPP bytes. */
81 DWORD dwPAPAConvert; /* DSP PA to GPP PA Conversion. */
82 CMM_CNVTTYPE cFactor; /* CMM_ADDTOPA=1, CMM_SUBFROMPA=-1 */
83 } ;
84
85/* Fixed size memory descriptor */
86 struct CMM_FDESC {
87 struct LST_ELEM link; /* must be 1st element */
88 DWORD dwPA;
89 DWORD dwVA;
90 DWORD dwSize;
91 DWORD dwAttrs; /* [31-1 reserved ][0 - SM] */
92 } ;
93
94 struct CMM_SEGINFO {
95 DWORD dwSegBasePa; /* Start Phys address of SM segment */
96 ULONG ulTotalSegSize; /* Total size in bytes of segment: DSP+GPP */
97 DWORD dwGPPBasePA; /* Start Phys addr of Gpp SM seg */
98 ULONG ulGPPSize; /* Size of Gpp SM seg in bytes */
99 DWORD dwDSPBaseVA; /* DSP virt base byte address */
100 ULONG ulDSPSize; /* DSP seg size in bytes */
101 ULONG ulInUseCnt; /* # of current GPP allocations from this segment */
102 DWORD dwSegBaseVa; /* Start Virt address of SM seg */
103
104 } ;
105
106/* CMM useful information */
107 struct CMM_INFO {
108 ULONG ulNumGPPSMSegs; /* # of SM segments registered with this Cmm. */
109 ULONG ulTotalInUseCnt; /* Total # of allocations outstanding for CMM */
110 /* Min SM block size allocation from CMM_Create() */
111 ULONG ulMinBlockSize;
112 /* Info per registered SM segment. */
113 struct CMM_SEGINFO segInfo[CMM_MAXGPPSEGS];
114 } ;
115
116/* XlatorCreate attributes */
117 struct CMM_XLATORATTRS {
118 ULONG ulSegId; /* segment Id used for SM allocations */
119 DWORD dwDSPBufs; /* # of DSP-side bufs */
120 DWORD dwDSPBufSize; /* size of DSP-side bufs in GPP bytes */
121 PVOID pVmBase; /* Vm base address alloc'd in client process context */
122 DWORD dwVmSize; /* dwVmSize must be >= (dwMaxNumBufs * dwMaxSize) */
123 } ;
124
125/* Descriptor attributes */
126 typedef enum {
127 CMM_LOCAL = 0, /* Bit 0 =0 is local memory from default heap */
128 CMM_SHARED = 1, /* Bit 0 =1 descriptor is SM */
129 /* Bits 1- 31 RESERVED for future use */
130 } CMM_DESCTYPE;
131
132/*
133 * Cmm translation types. Use to map SM addresses to process context.
134 */
135 typedef enum {
136 CMM_VA2PA = 0, /* Virtual to GPP physical address xlation */
137 CMM_PA2VA = 1, /* GPP Physical to virtual */
138 CMM_VA2DSPPA = 2, /* Va to DSP Pa */
139 CMM_PA2DSPPA = 3, /* GPP Pa to DSP Pa */
140 CMM_DSPPA2PA = 4, /* DSP Pa to GPP Pa */
141 } CMM_XLATETYPE;
142
143/*
144 * Used to "map" between device process virt addr and dsp addr.
145 */
146 typedef enum {
147 CMM_KERNVA2DSP = 0, /* Device process context to dsp address. */
148 CMM_DSP2KERNVA = 1, /* Dsp address to device process context. */
149 } CMM_KERNMAPTYPE;
150
151 struct CMM_OBJECT;
152 /*typedef struct CMM_OBJECT *CMM_HMGR;*/
153 struct CMM_XLATOROBJECT;
154 /*typedef struct CMM_XLATOROBJECT *CMM_HXLATOR;*/
155
156#ifdef __cplusplus
157}
158#endif
159#endif /* CMMDEFS_ */