Initial commit from HTC m7ul-3.4.10-jb-crc-ddcfb8c
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
new file mode 100644
index 0000000..6004a73
--- /dev/null
+++ b/include/linux/mtd/bbm.h
@@ -0,0 +1,121 @@
+/*
+ * linux/include/linux/mtd/bbm.h
+ *
+ * NAND family Bad Block Management (BBM) header file
+ * - Bad Block Table (BBT) implementation
+ *
+ * Copyright © 2005 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Copyright © 2000-2005
+ * Thomas Gleixner <tglx@linuxtronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+#ifndef __LINUX_MTD_BBM_H
+#define __LINUX_MTD_BBM_H
+
+#define NAND_MAX_CHIPS 8
+
+/**
+ * struct nand_bbt_descr - bad block table descriptor
+ * @options: options for this descriptor
+ * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE
+ * when bbt is searched, then we store the found bbts pages here.
+ * Its an array and supports up to 8 chips now
+ * @offs: offset of the pattern in the oob area of the page
+ * @veroffs: offset of the bbt version counter in the oob are of the page
+ * @version: version read from the bbt page during scan
+ * @len: length of the pattern, if 0 no pattern check is performed
+ * @maxblocks: maximum number of blocks to search for a bbt. This number of
+ * blocks is reserved at the end of the device where the tables are
+ * written.
+ * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
+ * bad) block in the stored bbt
+ * @pattern: pattern to identify bad block table or factory marked good /
+ * bad blocks, can be NULL, if len = 0
+ *
+ * Descriptor for the bad block table marker and the descriptor for the
+ * pattern which identifies good and bad blocks. The assumption is made
+ * that the pattern and the version count are always located in the oob area
+ * of the first block.
+ */
+struct nand_bbt_descr {
+ int options;
+ int pages[NAND_MAX_CHIPS];
+ int offs;
+ int veroffs;
+ uint8_t version[NAND_MAX_CHIPS];
+ int len;
+ int maxblocks;
+ int reserved_block_code;
+ uint8_t *pattern;
+};
+
+
+#define NAND_BBT_NRBITS_MSK 0x0000000F
+#define NAND_BBT_1BIT 0x00000001
+#define NAND_BBT_2BIT 0x00000002
+#define NAND_BBT_4BIT 0x00000004
+#define NAND_BBT_8BIT 0x00000008
+#define NAND_BBT_LASTBLOCK 0x00000010
+#define NAND_BBT_ABSPAGE 0x00000020
+#define NAND_BBT_SEARCH 0x00000040
+#define NAND_BBT_PERCHIP 0x00000080
+#define NAND_BBT_VERSION 0x00000100
+#define NAND_BBT_CREATE 0x00000200
+#define NAND_BBT_CREATE_EMPTY 0x00000400
+#define NAND_BBT_SCANALLPAGES 0x00000800
+#define NAND_BBT_SCANEMPTY 0x00001000
+#define NAND_BBT_WRITE 0x00002000
+#define NAND_BBT_SAVECONTENT 0x00004000
+#define NAND_BBT_SCAN2NDPAGE 0x00008000
+#define NAND_BBT_SCANLASTPAGE 0x00010000
+#define NAND_BBT_USE_FLASH 0x00020000
+#define NAND_BBT_NO_OOB 0x00040000
+#define NAND_BBT_NO_OOB_BBM 0x00080000
+
+#define NAND_BBT_DYNAMICSTRUCT 0x80000000
+
+#define NAND_BBT_SCAN_MAXBLOCKS 4
+
+#define NAND_SMALL_BADBLOCK_POS 5
+#define NAND_LARGE_BADBLOCK_POS 0
+#define ONENAND_BADBLOCK_POS 0
+
+#define ONENAND_BBT_READ_ERROR 1
+#define ONENAND_BBT_READ_ECC_ERROR 2
+#define ONENAND_BBT_READ_FATAL_ERROR 4
+
+struct bbm_info {
+ int bbt_erase_shift;
+ int badblockpos;
+ int options;
+
+ uint8_t *bbt;
+
+ int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt);
+
+
+ struct nand_bbt_descr *badblock_pattern;
+
+ void *priv;
+};
+
+extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int onenand_default_bbt(struct mtd_info *mtd);
+
+#endif
diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h
new file mode 100644
index 0000000..ed270bd
--- /dev/null
+++ b/include/linux/mtd/blktrans.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright © 2003-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __MTD_TRANS_H__
+#define __MTD_TRANS_H__
+
+#include <linux/mutex.h>
+#include <linux/kref.h>
+#include <linux/sysfs.h>
+
+struct hd_geometry;
+struct mtd_info;
+struct mtd_blktrans_ops;
+struct file;
+struct inode;
+
+struct mtd_blktrans_dev {
+ struct mtd_blktrans_ops *tr;
+ struct list_head list;
+ struct mtd_info *mtd;
+ struct mutex lock;
+ int devnum;
+ bool bg_stop;
+ unsigned long size;
+ int readonly;
+ int open;
+ struct kref ref;
+ struct gendisk *disk;
+ struct attribute_group *disk_attributes;
+ struct task_struct *thread;
+ struct request_queue *rq;
+ spinlock_t queue_lock;
+ void *priv;
+ fmode_t file_mode;
+};
+
+struct mtd_blktrans_ops {
+ char *name;
+ int major;
+ int part_bits;
+ int blksize;
+ int blkshift;
+
+ /* Access functions */
+ int (*readsect)(struct mtd_blktrans_dev *dev,
+ unsigned long block, char *buffer);
+ int (*writesect)(struct mtd_blktrans_dev *dev,
+ unsigned long block, char *buffer);
+ int (*discard)(struct mtd_blktrans_dev *dev,
+ unsigned long block, unsigned nr_blocks);
+ void (*background)(struct mtd_blktrans_dev *dev);
+
+ /* Block layer ioctls */
+ int (*getgeo)(struct mtd_blktrans_dev *dev, struct hd_geometry *geo);
+ int (*flush)(struct mtd_blktrans_dev *dev);
+
+ /* Called with mtd_table_mutex held; no race with add/remove */
+ int (*open)(struct mtd_blktrans_dev *dev);
+ int (*release)(struct mtd_blktrans_dev *dev);
+
+ /* Called on {de,}registration and on subsequent addition/removal
+ of devices, with mtd_table_mutex held. */
+ void (*add_mtd)(struct mtd_blktrans_ops *tr, struct mtd_info *mtd);
+ void (*remove_dev)(struct mtd_blktrans_dev *dev);
+
+ struct list_head devs;
+ struct list_head list;
+ struct module *owner;
+};
+
+extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr);
+extern int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr);
+extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
+extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev);
+extern int mtd_blktrans_cease_background(struct mtd_blktrans_dev *dev);
+
+
+#endif /* __MTD_TRANS_H__ */
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h
new file mode 100644
index 0000000..37ef6b1
--- /dev/null
+++ b/include/linux/mtd/cfi.h
@@ -0,0 +1,564 @@
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __MTD_CFI_H__
+#define __MTD_CFI_H__
+
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/bug.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi_endian.h>
+#include <linux/mtd/xip.h>
+
+#ifdef CONFIG_MTD_CFI_I1
+#define cfi_interleave(cfi) 1
+#define cfi_interleave_is_1(cfi) (cfi_interleave(cfi) == 1)
+#else
+#define cfi_interleave_is_1(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I2
+# ifdef cfi_interleave
+# undef cfi_interleave
+# define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+# define cfi_interleave(cfi) 2
+# endif
+#define cfi_interleave_is_2(cfi) (cfi_interleave(cfi) == 2)
+#else
+#define cfi_interleave_is_2(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I4
+# ifdef cfi_interleave
+# undef cfi_interleave
+# define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+# define cfi_interleave(cfi) 4
+# endif
+#define cfi_interleave_is_4(cfi) (cfi_interleave(cfi) == 4)
+#else
+#define cfi_interleave_is_4(cfi) (0)
+#endif
+
+#ifdef CONFIG_MTD_CFI_I8
+# ifdef cfi_interleave
+# undef cfi_interleave
+# define cfi_interleave(cfi) ((cfi)->interleave)
+# else
+# define cfi_interleave(cfi) 8
+# endif
+#define cfi_interleave_is_8(cfi) (cfi_interleave(cfi) == 8)
+#else
+#define cfi_interleave_is_8(cfi) (0)
+#endif
+
+#ifndef cfi_interleave
+#warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work.
+static inline int cfi_interleave(void *cfi)
+{
+ BUG();
+ return 0;
+}
+#endif
+
+static inline int cfi_interleave_supported(int i)
+{
+ switch (i) {
+#ifdef CONFIG_MTD_CFI_I1
+ case 1:
+#endif
+#ifdef CONFIG_MTD_CFI_I2
+ case 2:
+#endif
+#ifdef CONFIG_MTD_CFI_I4
+ case 4:
+#endif
+#ifdef CONFIG_MTD_CFI_I8
+ case 8:
+#endif
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+
+/* NB: these values must represents the number of bytes needed to meet the
+ * device type (x8, x16, x32). Eg. a 32 bit device is 4 x 8 bytes.
+ * These numbers are used in calculations.
+ */
+#define CFI_DEVICETYPE_X8 (8 / 8)
+#define CFI_DEVICETYPE_X16 (16 / 8)
+#define CFI_DEVICETYPE_X32 (32 / 8)
+#define CFI_DEVICETYPE_X64 (64 / 8)
+
+
+/* Device Interface Code Assignments from the "Common Flash Memory Interface
+ * Publication 100" dated December 1, 2001.
+ */
+#define CFI_INTERFACE_X8_ASYNC 0x0000
+#define CFI_INTERFACE_X16_ASYNC 0x0001
+#define CFI_INTERFACE_X8_BY_X16_ASYNC 0x0002
+#define CFI_INTERFACE_X32_ASYNC 0x0003
+#define CFI_INTERFACE_X16_BY_X32_ASYNC 0x0005
+#define CFI_INTERFACE_NOT_ALLOWED 0xffff
+
+
+/* NB: We keep these structures in memory in HOST byteorder, except
+ * where individually noted.
+ */
+
+/* Basic Query Structure */
+struct cfi_ident {
+ uint8_t qry[3];
+ uint16_t P_ID;
+ uint16_t P_ADR;
+ uint16_t A_ID;
+ uint16_t A_ADR;
+ uint8_t VccMin;
+ uint8_t VccMax;
+ uint8_t VppMin;
+ uint8_t VppMax;
+ uint8_t WordWriteTimeoutTyp;
+ uint8_t BufWriteTimeoutTyp;
+ uint8_t BlockEraseTimeoutTyp;
+ uint8_t ChipEraseTimeoutTyp;
+ uint8_t WordWriteTimeoutMax;
+ uint8_t BufWriteTimeoutMax;
+ uint8_t BlockEraseTimeoutMax;
+ uint8_t ChipEraseTimeoutMax;
+ uint8_t DevSize;
+ uint16_t InterfaceDesc;
+ uint16_t MaxBufWriteSize;
+ uint8_t NumEraseRegions;
+ uint32_t EraseRegionInfo[0]; /* Not host ordered */
+} __attribute__((packed));
+
+/* Extended Query Structure for both PRI and ALT */
+
+struct cfi_extquery {
+ uint8_t pri[3];
+ uint8_t MajorVersion;
+ uint8_t MinorVersion;
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */
+
+struct cfi_pri_intelext {
+ uint8_t pri[3];
+ uint8_t MajorVersion;
+ uint8_t MinorVersion;
+ uint32_t FeatureSupport; /* if bit 31 is set then an additional uint32_t feature
+ block follows - FIXME - not currently supported */
+ uint8_t SuspendCmdSupport;
+ uint16_t BlkStatusRegMask;
+ uint8_t VccOptimal;
+ uint8_t VppOptimal;
+ uint8_t NumProtectionFields;
+ uint16_t ProtRegAddr;
+ uint8_t FactProtRegSize;
+ uint8_t UserProtRegSize;
+ uint8_t extra[0];
+} __attribute__((packed));
+
+struct cfi_intelext_otpinfo {
+ uint32_t ProtRegAddr;
+ uint16_t FactGroups;
+ uint8_t FactProtRegSize;
+ uint16_t UserGroups;
+ uint8_t UserProtRegSize;
+} __attribute__((packed));
+
+struct cfi_intelext_blockinfo {
+ uint16_t NumIdentBlocks;
+ uint16_t BlockSize;
+ uint16_t MinBlockEraseCycles;
+ uint8_t BitsPerCell;
+ uint8_t BlockCap;
+} __attribute__((packed));
+
+struct cfi_intelext_regioninfo {
+ uint16_t NumIdentPartitions;
+ uint8_t NumOpAllowed;
+ uint8_t NumOpAllowedSimProgMode;
+ uint8_t NumOpAllowedSimEraMode;
+ uint8_t NumBlockTypes;
+ struct cfi_intelext_blockinfo BlockTypes[1];
+} __attribute__((packed));
+
+struct cfi_intelext_programming_regioninfo {
+ uint8_t ProgRegShift;
+ uint8_t Reserved1;
+ uint8_t ControlValid;
+ uint8_t Reserved2;
+ uint8_t ControlInvalid;
+ uint8_t Reserved3;
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */
+
+struct cfi_pri_amdstd {
+ uint8_t pri[3];
+ uint8_t MajorVersion;
+ uint8_t MinorVersion;
+ uint8_t SiliconRevision; /* bits 1-0: Address Sensitive Unlock */
+ uint8_t EraseSuspend;
+ uint8_t BlkProt;
+ uint8_t TmpBlkUnprotect;
+ uint8_t BlkProtUnprot;
+ uint8_t SimultaneousOps;
+ uint8_t BurstMode;
+ uint8_t PageMode;
+ uint8_t VppMin;
+ uint8_t VppMax;
+ uint8_t TopBottom;
+} __attribute__((packed));
+
+/* Vendor-Specific PRI for Atmel chips (command set 0x0002) */
+
+struct cfi_pri_atmel {
+ uint8_t pri[3];
+ uint8_t MajorVersion;
+ uint8_t MinorVersion;
+ uint8_t Features;
+ uint8_t BottomBoot;
+ uint8_t BurstMode;
+ uint8_t PageMode;
+} __attribute__((packed));
+
+struct cfi_pri_query {
+ uint8_t NumFields;
+ uint32_t ProtField[1]; /* Not host ordered */
+} __attribute__((packed));
+
+struct cfi_bri_query {
+ uint8_t PageModeReadCap;
+ uint8_t NumFields;
+ uint32_t ConfField[1]; /* Not host ordered */
+} __attribute__((packed));
+
+#define P_ID_NONE 0x0000
+#define P_ID_INTEL_EXT 0x0001
+#define P_ID_AMD_STD 0x0002
+#define P_ID_INTEL_STD 0x0003
+#define P_ID_AMD_EXT 0x0004
+#define P_ID_WINBOND 0x0006
+#define P_ID_ST_ADV 0x0020
+#define P_ID_MITSUBISHI_STD 0x0100
+#define P_ID_MITSUBISHI_EXT 0x0101
+#define P_ID_SST_PAGE 0x0102
+#define P_ID_SST_OLD 0x0701
+#define P_ID_INTEL_PERFORMANCE 0x0200
+#define P_ID_INTEL_DATA 0x0210
+#define P_ID_RESERVED 0xffff
+
+
+#define CFI_MODE_CFI 1
+#define CFI_MODE_JEDEC 0
+
+struct cfi_private {
+ uint16_t cmdset;
+ void *cmdset_priv;
+ int interleave;
+ int device_type;
+ int cfi_mode; /* Are we a JEDEC device pretending to be CFI? */
+ int addr_unlock1;
+ int addr_unlock2;
+ struct mtd_info *(*cmdset_setup)(struct map_info *);
+ struct cfi_ident *cfiq; /* For now only one. We insist that all devs
+ must be of the same type. */
+ int mfr, id;
+ int numchips;
+ map_word sector_erase_cmd;
+ unsigned long chipshift; /* Because they're of the same type */
+ const char *im_name; /* inter_module name for cmdset_setup */
+ struct flchip chips[0]; /* per-chip data structure for each chip */
+};
+
+/*
+ * Returns the command address according to the given geometry.
+ */
+static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
+ struct map_info *map, struct cfi_private *cfi)
+{
+ unsigned bankwidth = map_bankwidth(map);
+ unsigned interleave = cfi_interleave(cfi);
+ unsigned type = cfi->device_type;
+ uint32_t addr;
+
+ addr = (cmd_ofs * type) * interleave;
+
+ /* Modify the unlock address if we are in compatibility mode.
+ * For 16bit devices on 8 bit busses
+ * and 32bit devices on 16 bit busses
+ * set the low bit of the alternating bit sequence of the address.
+ */
+ if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa))
+ addr |= (type >> 1)*interleave;
+
+ return addr;
+}
+
+/*
+ * Transforms the CFI command for the given geometry (bus width & interleave).
+ * It looks too long to be inline, but in the common case it should almost all
+ * get optimised away.
+ */
+static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi)
+{
+ map_word val = { {0} };
+ int wordwidth, words_per_bus, chip_mode, chips_per_word;
+ unsigned long onecmd;
+ int i;
+
+ /* We do it this way to give the compiler a fighting chance
+ of optimising away all the crap for 'bankwidth' larger than
+ an unsigned long, in the common case where that support is
+ disabled */
+ if (map_bankwidth_is_large(map)) {
+ wordwidth = sizeof(unsigned long);
+ words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
+ } else {
+ wordwidth = map_bankwidth(map);
+ words_per_bus = 1;
+ }
+
+ chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
+ chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
+
+ /* First, determine what the bit-pattern should be for a single
+ device, according to chip mode and endianness... */
+ switch (chip_mode) {
+ default: BUG();
+ case 1:
+ onecmd = cmd;
+ break;
+ case 2:
+ onecmd = cpu_to_cfi16(map, cmd);
+ break;
+ case 4:
+ onecmd = cpu_to_cfi32(map, cmd);
+ break;
+ }
+
+ /* Now replicate it across the size of an unsigned long, or
+ just to the bus width as appropriate */
+ switch (chips_per_word) {
+ default: BUG();
+#if BITS_PER_LONG >= 64
+ case 8:
+ onecmd |= (onecmd << (chip_mode * 32));
+#endif
+ case 4:
+ onecmd |= (onecmd << (chip_mode * 16));
+ case 2:
+ onecmd |= (onecmd << (chip_mode * 8));
+ case 1:
+ ;
+ }
+
+ /* And finally, for the multi-word case, replicate it
+ in all words in the structure */
+ for (i=0; i < words_per_bus; i++) {
+ val.x[i] = onecmd;
+ }
+
+ return val;
+}
+#define CMD(x) cfi_build_cmd((x), map, cfi)
+
+
+static inline unsigned long cfi_merge_status(map_word val, struct map_info *map,
+ struct cfi_private *cfi)
+{
+ int wordwidth, words_per_bus, chip_mode, chips_per_word;
+ unsigned long onestat, res = 0;
+ int i;
+
+ /* We do it this way to give the compiler a fighting chance
+ of optimising away all the crap for 'bankwidth' larger than
+ an unsigned long, in the common case where that support is
+ disabled */
+ if (map_bankwidth_is_large(map)) {
+ wordwidth = sizeof(unsigned long);
+ words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
+ } else {
+ wordwidth = map_bankwidth(map);
+ words_per_bus = 1;
+ }
+
+ chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
+ chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
+
+ onestat = val.x[0];
+ /* Or all status words together */
+ for (i=1; i < words_per_bus; i++) {
+ onestat |= val.x[i];
+ }
+
+ res = onestat;
+ switch(chips_per_word) {
+ default: BUG();
+#if BITS_PER_LONG >= 64
+ case 8:
+ res |= (onestat >> (chip_mode * 32));
+#endif
+ case 4:
+ res |= (onestat >> (chip_mode * 16));
+ case 2:
+ res |= (onestat >> (chip_mode * 8));
+ case 1:
+ ;
+ }
+
+ /* Last, determine what the bit-pattern should be for a single
+ device, according to chip mode and endianness... */
+ switch (chip_mode) {
+ case 1:
+ break;
+ case 2:
+ res = cfi16_to_cpu(map, res);
+ break;
+ case 4:
+ res = cfi32_to_cpu(map, res);
+ break;
+ default: BUG();
+ }
+ return res;
+}
+
+#define MERGESTATUS(x) cfi_merge_status((x), map, cfi)
+
+
+/*
+ * Sends a CFI command to a bank of flash for the given geometry.
+ *
+ * Returns the offset in flash where the command was written.
+ * If prev_val is non-null, it will be set to the value at the command address,
+ * before the command was written.
+ */
+static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
+ struct map_info *map, struct cfi_private *cfi,
+ int type, map_word *prev_val)
+{
+ map_word val;
+ uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi);
+ val = cfi_build_cmd(cmd, map, cfi);
+
+ if (prev_val)
+ *prev_val = map_read(map, addr);
+
+ map_write(map, val, addr);
+
+ return addr - base;
+}
+
+static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr)
+{
+ map_word val = map_read(map, addr);
+
+ if (map_bankwidth_is_1(map)) {
+ return val.x[0];
+ } else if (map_bankwidth_is_2(map)) {
+ return cfi16_to_cpu(map, val.x[0]);
+ } else {
+ /* No point in a 64-bit byteswap since that would just be
+ swapping the responses from different chips, and we are
+ only interested in one chip (a representative sample) */
+ return cfi32_to_cpu(map, val.x[0]);
+ }
+}
+
+static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr)
+{
+ map_word val = map_read(map, addr);
+
+ if (map_bankwidth_is_1(map)) {
+ return val.x[0] & 0xff;
+ } else if (map_bankwidth_is_2(map)) {
+ return cfi16_to_cpu(map, val.x[0]);
+ } else {
+ /* No point in a 64-bit byteswap since that would just be
+ swapping the responses from different chips, and we are
+ only interested in one chip (a representative sample) */
+ return cfi32_to_cpu(map, val.x[0]);
+ }
+}
+
+static inline void cfi_udelay(int us)
+{
+ if (us >= 1000) {
+ msleep((us+999)/1000);
+ } else {
+ udelay(us);
+ cond_resched();
+ }
+}
+
+int __xipram cfi_qry_present(struct map_info *map, __u32 base,
+ struct cfi_private *cfi);
+int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
+ struct cfi_private *cfi);
+void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
+ struct cfi_private *cfi);
+
+struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size,
+ const char* name);
+struct cfi_fixup {
+ uint16_t mfr;
+ uint16_t id;
+ void (*fixup)(struct mtd_info *mtd);
+};
+
+#define CFI_MFR_ANY 0xFFFF
+#define CFI_ID_ANY 0xFFFF
+#define CFI_MFR_CONTINUATION 0x007F
+
+#define CFI_MFR_AMD 0x0001
+#define CFI_MFR_AMIC 0x0037
+#define CFI_MFR_ATMEL 0x001F
+#define CFI_MFR_EON 0x001C
+#define CFI_MFR_FUJITSU 0x0004
+#define CFI_MFR_HYUNDAI 0x00AD
+#define CFI_MFR_INTEL 0x0089
+#define CFI_MFR_MACRONIX 0x00C2
+#define CFI_MFR_NEC 0x0010
+#define CFI_MFR_PMC 0x009D
+#define CFI_MFR_SAMSUNG 0x00EC
+#define CFI_MFR_SHARP 0x00B0
+#define CFI_MFR_SST 0x00BF
+#define CFI_MFR_ST 0x0020 /* STMicroelectronics */
+#define CFI_MFR_TOSHIBA 0x0098
+#define CFI_MFR_WINBOND 0x00DA
+
+void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups);
+
+typedef int (*varsize_frob_t)(struct map_info *map, struct flchip *chip,
+ unsigned long adr, int len, void *thunk);
+
+int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
+ loff_t ofs, size_t len, void *thunk);
+
+
+#endif /* __MTD_CFI_H__ */
diff --git a/include/linux/mtd/cfi_endian.h b/include/linux/mtd/cfi_endian.h
new file mode 100644
index 0000000..b97a625
--- /dev/null
+++ b/include/linux/mtd/cfi_endian.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <asm/byteorder.h>
+
+#define CFI_HOST_ENDIAN 1
+#define CFI_LITTLE_ENDIAN 2
+#define CFI_BIG_ENDIAN 3
+
+#if !defined(CONFIG_MTD_CFI_ADV_OPTIONS) || defined(CONFIG_MTD_CFI_NOSWAP)
+#define CFI_DEFAULT_ENDIAN CFI_HOST_ENDIAN
+#elif defined(CONFIG_MTD_CFI_LE_BYTE_SWAP)
+#define CFI_DEFAULT_ENDIAN CFI_LITTLE_ENDIAN
+#elif defined(CONFIG_MTD_CFI_BE_BYTE_SWAP)
+#define CFI_DEFAULT_ENDIAN CFI_BIG_ENDIAN
+#else
+#error No CFI endianness defined
+#endif
+
+#define cfi_default(s) ((s)?:CFI_DEFAULT_ENDIAN)
+#define cfi_be(s) (cfi_default(s) == CFI_BIG_ENDIAN)
+#define cfi_le(s) (cfi_default(s) == CFI_LITTLE_ENDIAN)
+#define cfi_host(s) (cfi_default(s) == CFI_HOST_ENDIAN)
+
+#define cpu_to_cfi8(map, x) (x)
+#define cfi8_to_cpu(map, x) (x)
+#define cpu_to_cfi16(map, x) _cpu_to_cfi(16, (map)->swap, (x))
+#define cpu_to_cfi32(map, x) _cpu_to_cfi(32, (map)->swap, (x))
+#define cpu_to_cfi64(map, x) _cpu_to_cfi(64, (map)->swap, (x))
+#define cfi16_to_cpu(map, x) _cfi_to_cpu(16, (map)->swap, (x))
+#define cfi32_to_cpu(map, x) _cfi_to_cpu(32, (map)->swap, (x))
+#define cfi64_to_cpu(map, x) _cfi_to_cpu(64, (map)->swap, (x))
+
+#define _cpu_to_cfi(w, s, x) (cfi_host(s)?(x):_swap_to_cfi(w, s, x))
+#define _cfi_to_cpu(w, s, x) (cfi_host(s)?(x):_swap_to_cpu(w, s, x))
+#define _swap_to_cfi(w, s, x) (cfi_be(s)?cpu_to_be##w(x):cpu_to_le##w(x))
+#define _swap_to_cpu(w, s, x) (cfi_be(s)?be##w##_to_cpu(x):le##w##_to_cpu(x))
diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h
new file mode 100644
index 0000000..ccdbe93
--- /dev/null
+++ b/include/linux/mtd/concat.h
@@ -0,0 +1,34 @@
+/*
+ * MTD device concatenation layer definitions
+ *
+ * Copyright © 2002 Robert Kaiser <rkaiser@sysgo.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef MTD_CONCAT_H
+#define MTD_CONCAT_H
+
+
+struct mtd_info *mtd_concat_create(
+ struct mtd_info *subdev[], /* subdevices to concatenate */
+ int num_devs, /* number of subdevices */
+ const char *name); /* name for the new device */
+
+void mtd_concat_destroy(struct mtd_info *mtd);
+
+#endif
+
diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h
new file mode 100644
index 0000000..0f6fea7
--- /dev/null
+++ b/include/linux/mtd/doc2000.h
@@ -0,0 +1,206 @@
+/*
+ * Linux driver for Disk-On-Chip devices
+ *
+ * Copyright © 1999 Machine Vision Holdings, Inc.
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2002-2003 Greg Ungerer <gerg@snapgear.com>
+ * Copyright © 2002-2003 SnapGear Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __MTD_DOC2000_H__
+#define __MTD_DOC2000_H__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mutex.h>
+
+#define DoC_Sig1 0
+#define DoC_Sig2 1
+
+#define DoC_ChipID 0x1000
+#define DoC_DOCStatus 0x1001
+#define DoC_DOCControl 0x1002
+#define DoC_FloorSelect 0x1003
+#define DoC_CDSNControl 0x1004
+#define DoC_CDSNDeviceSelect 0x1005
+#define DoC_ECCConf 0x1006
+#define DoC_2k_ECCStatus 0x1007
+
+#define DoC_CDSNSlowIO 0x100d
+#define DoC_ECCSyndrome0 0x1010
+#define DoC_ECCSyndrome1 0x1011
+#define DoC_ECCSyndrome2 0x1012
+#define DoC_ECCSyndrome3 0x1013
+#define DoC_ECCSyndrome4 0x1014
+#define DoC_ECCSyndrome5 0x1015
+#define DoC_AliasResolution 0x101b
+#define DoC_ConfigInput 0x101c
+#define DoC_ReadPipeInit 0x101d
+#define DoC_WritePipeTerm 0x101e
+#define DoC_LastDataRead 0x101f
+#define DoC_NOP 0x1020
+
+#define DoC_Mil_CDSN_IO 0x0800
+#define DoC_2k_CDSN_IO 0x1800
+
+#define DoC_Mplus_NOP 0x1002
+#define DoC_Mplus_AliasResolution 0x1004
+#define DoC_Mplus_DOCControl 0x1006
+#define DoC_Mplus_AccessStatus 0x1008
+#define DoC_Mplus_DeviceSelect 0x1008
+#define DoC_Mplus_Configuration 0x100a
+#define DoC_Mplus_OutputControl 0x100c
+#define DoC_Mplus_FlashControl 0x1020
+#define DoC_Mplus_FlashSelect 0x1022
+#define DoC_Mplus_FlashCmd 0x1024
+#define DoC_Mplus_FlashAddress 0x1026
+#define DoC_Mplus_FlashData0 0x1028
+#define DoC_Mplus_FlashData1 0x1029
+#define DoC_Mplus_ReadPipeInit 0x102a
+#define DoC_Mplus_LastDataRead 0x102c
+#define DoC_Mplus_LastDataRead1 0x102d
+#define DoC_Mplus_WritePipeTerm 0x102e
+#define DoC_Mplus_ECCSyndrome0 0x1040
+#define DoC_Mplus_ECCSyndrome1 0x1041
+#define DoC_Mplus_ECCSyndrome2 0x1042
+#define DoC_Mplus_ECCSyndrome3 0x1043
+#define DoC_Mplus_ECCSyndrome4 0x1044
+#define DoC_Mplus_ECCSyndrome5 0x1045
+#define DoC_Mplus_ECCConf 0x1046
+#define DoC_Mplus_Toggle 0x1046
+#define DoC_Mplus_DownloadStatus 0x1074
+#define DoC_Mplus_CtrlConfirm 0x1076
+#define DoC_Mplus_Power 0x1fff
+
+/* How to access the device?
+ * On ARM, it'll be mmap'd directly with 32-bit wide accesses.
+ * On PPC, it's mmap'd and 16-bit wide.
+ * Others use readb/writeb
+ */
+#if defined(__arm__)
+#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2))))
+#define WriteDOC_(d, adr, reg) do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0)
+#define DOC_IOREMAP_LEN 0x8000
+#elif defined(__ppc__)
+#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1))))
+#define WriteDOC_(d, adr, reg) do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0)
+#define DOC_IOREMAP_LEN 0x4000
+#else
+#define ReadDOC_(adr, reg) readb((void __iomem *)(adr) + (reg))
+#define WriteDOC_(d, adr, reg) writeb(d, (void __iomem *)(adr) + (reg))
+#define DOC_IOREMAP_LEN 0x2000
+
+#endif
+
+#if defined(__i386__) || defined(__x86_64__)
+#define USE_MEMCPY
+#endif
+
+/* These are provided to directly use the DoC_xxx defines */
+#define ReadDOC(adr, reg) ReadDOC_(adr,DoC_##reg)
+#define WriteDOC(d, adr, reg) WriteDOC_(d,adr,DoC_##reg)
+
+#define DOC_MODE_RESET 0
+#define DOC_MODE_NORMAL 1
+#define DOC_MODE_RESERVED1 2
+#define DOC_MODE_RESERVED2 3
+
+#define DOC_MODE_CLR_ERR 0x80
+#define DOC_MODE_RST_LAT 0x10
+#define DOC_MODE_BDECT 0x08
+#define DOC_MODE_MDWREN 0x04
+
+#define DOC_ChipID_Doc2k 0x20
+#define DOC_ChipID_Doc2kTSOP 0x21 /* internal number for MTD */
+#define DOC_ChipID_DocMil 0x30
+#define DOC_ChipID_DocMilPlus32 0x40
+#define DOC_ChipID_DocMilPlus16 0x41
+
+#define CDSN_CTRL_FR_B 0x80
+#define CDSN_CTRL_FR_B0 0x40
+#define CDSN_CTRL_FR_B1 0x80
+
+#define CDSN_CTRL_ECC_IO 0x20
+#define CDSN_CTRL_FLASH_IO 0x10
+#define CDSN_CTRL_WP 0x08
+#define CDSN_CTRL_ALE 0x04
+#define CDSN_CTRL_CLE 0x02
+#define CDSN_CTRL_CE 0x01
+
+#define DOC_ECC_RESET 0
+#define DOC_ECC_ERROR 0x80
+#define DOC_ECC_RW 0x20
+#define DOC_ECC__EN 0x08
+#define DOC_TOGGLE_BIT 0x04
+#define DOC_ECC_RESV 0x02
+#define DOC_ECC_IGNORE 0x01
+
+#define DOC_FLASH_CE 0x80
+#define DOC_FLASH_WP 0x40
+#define DOC_FLASH_BANK 0x02
+
+/* We have to also set the reserved bit 1 for enable */
+#define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV)
+#define DOC_ECC_DIS (DOC_ECC_RESV)
+
+struct Nand {
+ char floor, chip;
+ unsigned long curadr;
+ unsigned char curmode;
+ /* Also some erase/write/pipeline info when we get that far */
+};
+
+#define MAX_FLOORS 4
+#define MAX_CHIPS 4
+
+#define MAX_FLOORS_MIL 1
+#define MAX_CHIPS_MIL 1
+
+#define MAX_FLOORS_MPLUS 2
+#define MAX_CHIPS_MPLUS 1
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+struct DiskOnChip {
+ unsigned long physadr;
+ void __iomem *virtadr;
+ unsigned long totlen;
+ unsigned char ChipID; /* Type of DiskOnChip */
+ int ioreg;
+
+ unsigned long mfr; /* Flash IDs - only one type of flash per device */
+ unsigned long id;
+ int chipshift;
+ char page256;
+ char pageadrlen;
+ char interleave; /* Internal interleaving - Millennium Plus style */
+ unsigned long erasesize;
+
+ int curfloor;
+ int curchip;
+
+ int numchips;
+ struct Nand *chips;
+ struct mtd_info *nextdoc;
+ struct mutex lock;
+};
+
+int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]);
+
+#endif /* __MTD_DOC2000_H__ */
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
new file mode 100644
index 0000000..ea876d6
--- /dev/null
+++ b/include/linux/mtd/flashchip.h
@@ -0,0 +1,95 @@
+/*
+ * Copyright © 2000 Red Hat UK Limited
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __MTD_FLASHCHIP_H__
+#define __MTD_FLASHCHIP_H__
+
+#include <linux/sched.h>
+#include <linux/mutex.h>
+
+typedef enum {
+ FL_READY,
+ FL_STATUS,
+ FL_CFI_QUERY,
+ FL_JEDEC_QUERY,
+ FL_ERASING,
+ FL_ERASE_SUSPENDING,
+ FL_ERASE_SUSPENDED,
+ FL_WRITING,
+ FL_WRITING_TO_BUFFER,
+ FL_OTP_WRITE,
+ FL_WRITE_SUSPENDING,
+ FL_WRITE_SUSPENDED,
+ FL_PM_SUSPENDED,
+ FL_SYNCING,
+ FL_UNLOADING,
+ FL_LOCKING,
+ FL_UNLOCKING,
+ FL_POINT,
+ FL_XIP_WHILE_ERASING,
+ FL_XIP_WHILE_WRITING,
+ FL_SHUTDOWN,
+
+ FL_READING,
+ FL_CACHEDPRG,
+
+ FL_RESETING,
+ FL_OTPING,
+ FL_PREPARING_ERASE,
+ FL_VERIFYING_ERASE,
+
+ FL_UNKNOWN
+} flstate_t;
+
+
+
+
+struct flchip {
+ unsigned long start;
+
+ int ref_point_counter;
+ flstate_t state;
+ flstate_t oldstate;
+
+ unsigned int write_suspended:1;
+ unsigned int erase_suspended:1;
+ unsigned long in_progress_block_addr;
+
+ struct mutex mutex;
+ wait_queue_head_t wq;
+ int word_write_time;
+ int buffer_write_time;
+ int erase_time;
+
+ int word_write_time_max;
+ int buffer_write_time_max;
+ int erase_time_max;
+
+ void *priv;
+};
+
+struct flchip_shared {
+ struct mutex lock;
+ struct flchip *writing;
+ struct flchip *erasing;
+};
+
+
+#endif
diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h
new file mode 100644
index 0000000..b200292
--- /dev/null
+++ b/include/linux/mtd/fsmc.h
@@ -0,0 +1,176 @@
+/*
+ * incude/mtd/fsmc.h
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * platform data interface and header file
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MTD_FSMC_H
+#define __MTD_FSMC_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/types.h>
+#include <linux/mtd/partitions.h>
+#include <asm/param.h>
+
+#define FSMC_NAND_BW8 1
+#define FSMC_NAND_BW16 2
+
+#define FSMC_MAX_NOR_BANKS 4
+#define FSMC_MAX_NAND_BANKS 4
+
+#define FSMC_FLASH_WIDTH8 1
+#define FSMC_FLASH_WIDTH16 2
+
+/* fsmc controller registers for NOR flash */
+#define CTRL 0x0
+ /* ctrl register definitions */
+ #define BANK_ENABLE (1 << 0)
+ #define MUXED (1 << 1)
+ #define NOR_DEV (2 << 2)
+ #define WIDTH_8 (0 << 4)
+ #define WIDTH_16 (1 << 4)
+ #define RSTPWRDWN (1 << 6)
+ #define WPROT (1 << 7)
+ #define WRT_ENABLE (1 << 12)
+ #define WAIT_ENB (1 << 13)
+
+#define CTRL_TIM 0x4
+ /* ctrl_tim register definitions */
+
+#define FSMC_NOR_BANK_SZ 0x8
+#define FSMC_NOR_REG_SIZE 0x40
+
+#define FSMC_NOR_REG(base, bank, reg) (base + \
+ FSMC_NOR_BANK_SZ * (bank) + \
+ reg)
+
+/* fsmc controller registers for NAND flash */
+#define PC 0x00
+ /* pc register definitions */
+ #define FSMC_RESET (1 << 0)
+ #define FSMC_WAITON (1 << 1)
+ #define FSMC_ENABLE (1 << 2)
+ #define FSMC_DEVTYPE_NAND (1 << 3)
+ #define FSMC_DEVWID_8 (0 << 4)
+ #define FSMC_DEVWID_16 (1 << 4)
+ #define FSMC_ECCEN (1 << 6)
+ #define FSMC_ECCPLEN_512 (0 << 7)
+ #define FSMC_ECCPLEN_256 (1 << 7)
+ #define FSMC_TCLR_1 (1)
+ #define FSMC_TCLR_SHIFT (9)
+ #define FSMC_TCLR_MASK (0xF)
+ #define FSMC_TAR_1 (1)
+ #define FSMC_TAR_SHIFT (13)
+ #define FSMC_TAR_MASK (0xF)
+#define STS 0x04
+ /* sts register definitions */
+ #define FSMC_CODE_RDY (1 << 15)
+#define COMM 0x08
+ /* comm register definitions */
+ #define FSMC_TSET_0 0
+ #define FSMC_TSET_SHIFT 0
+ #define FSMC_TSET_MASK 0xFF
+ #define FSMC_TWAIT_6 6
+ #define FSMC_TWAIT_SHIFT 8
+ #define FSMC_TWAIT_MASK 0xFF
+ #define FSMC_THOLD_4 4
+ #define FSMC_THOLD_SHIFT 16
+ #define FSMC_THOLD_MASK 0xFF
+ #define FSMC_THIZ_1 1
+ #define FSMC_THIZ_SHIFT 24
+ #define FSMC_THIZ_MASK 0xFF
+#define ATTRIB 0x0C
+#define IOATA 0x10
+#define ECC1 0x14
+#define ECC2 0x18
+#define ECC3 0x1C
+#define FSMC_NAND_BANK_SZ 0x20
+
+#define FSMC_NAND_REG(base, bank, reg) (base + FSMC_NOR_REG_SIZE + \
+ (FSMC_NAND_BANK_SZ * (bank)) + \
+ reg)
+
+#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
+
+/*
+ * There are 13 bytes of ecc for every 512 byte block in FSMC version 8
+ * and it has to be read consecutively and immediately after the 512
+ * byte data block for hardware to generate the error bit offsets
+ * Managing the ecc bytes in the following way is easier. This way is
+ * similar to oobfree structure maintained already in u-boot nand driver
+ */
+#define MAX_ECCPLACE_ENTRIES 32
+
+struct fsmc_nand_eccplace {
+ uint8_t offset;
+ uint8_t length;
+};
+
+struct fsmc_eccplace {
+ struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES];
+};
+
+struct fsmc_nand_timings {
+ uint8_t tclr;
+ uint8_t tar;
+ uint8_t thiz;
+ uint8_t thold;
+ uint8_t twait;
+ uint8_t tset;
+};
+
+enum access_mode {
+ USE_DMA_ACCESS = 1,
+ USE_WORD_ACCESS,
+};
+
+/**
+ * fsmc_nand_platform_data - platform specific NAND controller config
+ * @partitions: partition table for the platform, use a default fallback
+ * if this is NULL
+ * @nr_partitions: the number of partitions in the previous entry
+ * @options: different options for the driver
+ * @width: bus width
+ * @bank: default bank
+ * @select_bank: callback to select a certain bank, this is
+ * platform-specific. If the controller only supports one bank
+ * this may be set to NULL
+ */
+struct fsmc_nand_platform_data {
+ struct fsmc_nand_timings *nand_timings;
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
+ unsigned int options;
+ unsigned int width;
+ unsigned int bank;
+
+ /* CLE, ALE offsets */
+ unsigned int cle_off;
+ unsigned int ale_off;
+ enum access_mode mode;
+
+ void (*select_bank)(uint32_t bank, uint32_t busw);
+
+ /* priv structures for dma accesses */
+ void *read_dma_priv;
+ void *write_dma_priv;
+};
+
+extern int __init fsmc_nor_init(struct platform_device *pdev,
+ unsigned long base, uint32_t bank, uint32_t width);
+extern void __init fsmc_init_board_info(struct platform_device *pdev,
+ struct mtd_partition *partitions, unsigned int nr_partitions,
+ unsigned int width);
+
+#endif /* __MTD_FSMC_H */
diff --git a/include/linux/mtd/ftl.h b/include/linux/mtd/ftl.h
new file mode 100644
index 0000000..0555f7a
--- /dev/null
+++ b/include/linux/mtd/ftl.h
@@ -0,0 +1,74 @@
+/*
+ * Derived from (and probably identical to):
+ * ftl.h 1.7 1999/10/25 20:23:17
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#ifndef _LINUX_FTL_H
+#define _LINUX_FTL_H
+
+typedef struct erase_unit_header_t {
+ uint8_t LinkTargetTuple[5];
+ uint8_t DataOrgTuple[10];
+ uint8_t NumTransferUnits;
+ uint32_t EraseCount;
+ uint16_t LogicalEUN;
+ uint8_t BlockSize;
+ uint8_t EraseUnitSize;
+ uint16_t FirstPhysicalEUN;
+ uint16_t NumEraseUnits;
+ uint32_t FormattedSize;
+ uint32_t FirstVMAddress;
+ uint16_t NumVMPages;
+ uint8_t Flags;
+ uint8_t Code;
+ uint32_t SerialNumber;
+ uint32_t AltEUHOffset;
+ uint32_t BAMOffset;
+ uint8_t Reserved[12];
+ uint8_t EndTuple[2];
+} erase_unit_header_t;
+
+/* Flags in erase_unit_header_t */
+#define HIDDEN_AREA 0x01
+#define REVERSE_POLARITY 0x02
+#define DOUBLE_BAI 0x04
+
+/* Definitions for block allocation information */
+
+#define BLOCK_FREE(b) ((b) == 0xffffffff)
+#define BLOCK_DELETED(b) (((b) == 0) || ((b) == 0xfffffffe))
+
+#define BLOCK_TYPE(b) ((b) & 0x7f)
+#define BLOCK_ADDRESS(b) ((b) & ~0x7f)
+#define BLOCK_NUMBER(b) ((b) >> 9)
+#define BLOCK_CONTROL 0x30
+#define BLOCK_DATA 0x40
+#define BLOCK_REPLACEMENT 0x60
+#define BLOCK_BAD 0x70
+
+#endif /* _LINUX_FTL_H */
diff --git a/include/linux/mtd/gen_probe.h b/include/linux/mtd/gen_probe.h
new file mode 100644
index 0000000..2c45605
--- /dev/null
+++ b/include/linux/mtd/gen_probe.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright © 2001 Red Hat UK Limited
+ * Copyright © 2001-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __LINUX_MTD_GEN_PROBE_H__
+#define __LINUX_MTD_GEN_PROBE_H__
+
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/cfi.h>
+#include <linux/bitops.h>
+
+struct chip_probe {
+ char *name;
+ int (*probe_chip)(struct map_info *map, __u32 base,
+ unsigned long *chip_map, struct cfi_private *cfi);
+};
+
+struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp);
+
+#endif /* __LINUX_MTD_GEN_PROBE_H__ */
diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h
new file mode 100644
index 0000000..69b6dbf
--- /dev/null
+++ b/include/linux/mtd/gpmi-nand.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MXS_GPMI_NAND_H__
+#define __MACH_MXS_GPMI_NAND_H__
+
+/* The size of the resources is fixed. */
+#define GPMI_NAND_RES_SIZE 6
+
+/* Resource names for the GPMI NAND driver. */
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "GPMI NAND GPMI Registers"
+#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME "GPMI NAND GPMI Interrupt"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "GPMI NAND BCH Registers"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "GPMI NAND BCH Interrupt"
+#define GPMI_NAND_DMA_CHANNELS_RES_NAME "GPMI NAND DMA Channels"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "GPMI NAND DMA Interrupt"
+
+/**
+ * struct gpmi_nand_platform_data - GPMI NAND driver platform data.
+ *
+ * This structure communicates platform-specific information to the GPMI NAND
+ * driver that can't be expressed as resources.
+ *
+ * @platform_init: A pointer to a function the driver will call to
+ * initialize the platform (e.g., set up the pin mux).
+ * @min_prop_delay_in_ns: Minimum propagation delay of GPMI signals to and
+ * from the NAND Flash device, in nanoseconds.
+ * @max_prop_delay_in_ns: Maximum propagation delay of GPMI signals to and
+ * from the NAND Flash device, in nanoseconds.
+ * @max_chip_count: The maximum number of chips for which the driver
+ * should configure the hardware. This value most
+ * likely reflects the number of pins that are
+ * connected to a NAND Flash device. If this is
+ * greater than the SoC hardware can support, the
+ * driver will print a message and fail to initialize.
+ * @partitions: An optional pointer to an array of partition
+ * descriptions.
+ * @partition_count: The number of elements in the partitions array.
+ */
+struct gpmi_nand_platform_data {
+ /* SoC hardware information. */
+ int (*platform_init)(void);
+
+ /* NAND Flash information. */
+ unsigned int min_prop_delay_in_ns;
+ unsigned int max_prop_delay_in_ns;
+ unsigned int max_chip_count;
+
+ /* Medium information. */
+ struct mtd_partition *partitions;
+ unsigned partition_count;
+};
+#endif
diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h
new file mode 100644
index 0000000..02cd5f9
--- /dev/null
+++ b/include/linux/mtd/inftl.h
@@ -0,0 +1,63 @@
+/*
+ * inftl.h -- defines to support the Inverse NAND Flash Translation Layer
+ *
+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+#ifndef __MTD_INFTL_H__
+#define __MTD_INFTL_H__
+
+#ifndef __KERNEL__
+#error This is a kernel header. Perhaps include nftl-user.h instead?
+#endif
+
+#include <linux/mtd/blktrans.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nftl.h>
+
+#include <mtd/inftl-user.h>
+
+#ifndef INFTL_MAJOR
+#define INFTL_MAJOR 96
+#endif
+#define INFTL_PARTN_BITS 4
+
+#ifdef __KERNEL__
+
+struct INFTLrecord {
+ struct mtd_blktrans_dev mbd;
+ __u16 MediaUnit;
+ __u32 EraseSize;
+ struct INFTLMediaHeader MediaHdr;
+ int usecount;
+ unsigned char heads;
+ unsigned char sectors;
+ unsigned short cylinders;
+ __u16 numvunits;
+ __u16 firstEUN;
+ __u16 lastEUN;
+ __u16 numfreeEUNs;
+ __u16 LastFreeEUN; /* To speed up finding a free EUN */
+ int head,sect,cyl;
+ __u16 *PUtable; /* Physical Unit Table */
+ __u16 *VUtable; /* Virtual Unit Table */
+ unsigned int nb_blocks; /* number of physical blocks */
+ unsigned int nb_boot_blocks; /* number of blocks used by the bios */
+ struct erase_info instr;
+ struct nand_ecclayout oobinfo;
+};
+
+int INFTL_mount(struct INFTLrecord *s);
+int INFTL_formatblock(struct INFTLrecord *s, int block);
+
+void INFTL_dumptables(struct INFTLrecord *s);
+void INFTL_dumpVUchains(struct INFTLrecord *s);
+
+int inftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf);
+int inftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf);
+
+#endif /* __KERNEL__ */
+
+#endif /* __MTD_INFTL_H__ */
diff --git a/include/linux/mtd/latch-addr-flash.h b/include/linux/mtd/latch-addr-flash.h
new file mode 100644
index 0000000..e94b8e1
--- /dev/null
+++ b/include/linux/mtd/latch-addr-flash.h
@@ -0,0 +1,29 @@
+/*
+ * Interface for NOR flash driver whose high address lines are latched
+ *
+ * Copyright © 2008 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __LATCH_ADDR_FLASH__
+#define __LATCH_ADDR_FLASH__
+
+struct map_info;
+struct mtd_partition;
+
+struct latch_addr_flash_data {
+ unsigned int width;
+ unsigned int size;
+
+ int (*init)(void *data, int cs);
+ void (*done)(void *data);
+ void (*set_window)(unsigned long offset, void *data);
+ void *data;
+
+ unsigned int nr_parts;
+ struct mtd_partition *parts;
+};
+
+#endif
diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h
new file mode 100644
index 0000000..3595a02
--- /dev/null
+++ b/include/linux/mtd/map.h
@@ -0,0 +1,465 @@
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+/* Overhauled routines for dealing with different mmap regions of flash */
+
+#ifndef __LINUX_MTD_MAP_H__
+#define __LINUX_MTD_MAP_H__
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <asm/unaligned.h>
+#include <asm/io.h>
+#include <asm/barrier.h>
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
+#define map_bankwidth(map) 1
+#define map_bankwidth_is_1(map) (map_bankwidth(map) == 1)
+#define map_bankwidth_is_large(map) (0)
+#define map_words(map) (1)
+#define MAX_MAP_BANKWIDTH 1
+#else
+#define map_bankwidth_is_1(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2
+# ifdef map_bankwidth
+# undef map_bankwidth
+# define map_bankwidth(map) ((map)->bankwidth)
+# else
+# define map_bankwidth(map) 2
+# define map_bankwidth_is_large(map) (0)
+# define map_words(map) (1)
+# endif
+#define map_bankwidth_is_2(map) (map_bankwidth(map) == 2)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 2
+#else
+#define map_bankwidth_is_2(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4
+# ifdef map_bankwidth
+# undef map_bankwidth
+# define map_bankwidth(map) ((map)->bankwidth)
+# else
+# define map_bankwidth(map) 4
+# define map_bankwidth_is_large(map) (0)
+# define map_words(map) (1)
+# endif
+#define map_bankwidth_is_4(map) (map_bankwidth(map) == 4)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 4
+#else
+#define map_bankwidth_is_4(map) (0)
+#endif
+
+/* ensure we never evaluate anything shorted than an unsigned long
+ * to zero, and ensure we'll never miss the end of an comparison (bjd) */
+
+#define map_calc_words(map) ((map_bankwidth(map) + (sizeof(unsigned long)-1))/ sizeof(unsigned long))
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8
+# ifdef map_bankwidth
+# undef map_bankwidth
+# define map_bankwidth(map) ((map)->bankwidth)
+# if BITS_PER_LONG < 64
+# undef map_bankwidth_is_large
+# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+# undef map_words
+# define map_words(map) map_calc_words(map)
+# endif
+# else
+# define map_bankwidth(map) 8
+# define map_bankwidth_is_large(map) (BITS_PER_LONG < 64)
+# define map_words(map) map_calc_words(map)
+# endif
+#define map_bankwidth_is_8(map) (map_bankwidth(map) == 8)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 8
+#else
+#define map_bankwidth_is_8(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16
+# ifdef map_bankwidth
+# undef map_bankwidth
+# define map_bankwidth(map) ((map)->bankwidth)
+# undef map_bankwidth_is_large
+# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+# undef map_words
+# define map_words(map) map_calc_words(map)
+# else
+# define map_bankwidth(map) 16
+# define map_bankwidth_is_large(map) (1)
+# define map_words(map) map_calc_words(map)
+# endif
+#define map_bankwidth_is_16(map) (map_bankwidth(map) == 16)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 16
+#else
+#define map_bankwidth_is_16(map) (0)
+#endif
+
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32
+# ifdef map_bankwidth
+# undef map_bankwidth
+# define map_bankwidth(map) ((map)->bankwidth)
+# undef map_bankwidth_is_large
+# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8)
+# undef map_words
+# define map_words(map) map_calc_words(map)
+# else
+# define map_bankwidth(map) 32
+# define map_bankwidth_is_large(map) (1)
+# define map_words(map) map_calc_words(map)
+# endif
+#define map_bankwidth_is_32(map) (map_bankwidth(map) == 32)
+#undef MAX_MAP_BANKWIDTH
+#define MAX_MAP_BANKWIDTH 32
+#else
+#define map_bankwidth_is_32(map) (0)
+#endif
+
+#ifndef map_bankwidth
+#warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work"
+static inline int map_bankwidth(void *map)
+{
+ BUG();
+ return 0;
+}
+#define map_bankwidth_is_large(map) (0)
+#define map_words(map) (0)
+#define MAX_MAP_BANKWIDTH 1
+#endif
+
+static inline int map_bankwidth_supported(int w)
+{
+ switch (w) {
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
+ case 1:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2
+ case 2:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4
+ case 4:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8
+ case 8:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16
+ case 16:
+#endif
+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32
+ case 32:
+#endif
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+#define MAX_MAP_LONGS ( ((MAX_MAP_BANKWIDTH*8) + BITS_PER_LONG - 1) / BITS_PER_LONG )
+
+typedef union {
+ unsigned long x[MAX_MAP_LONGS];
+} map_word;
+
+/* The map stuff is very simple. You fill in your struct map_info with
+ a handful of routines for accessing the device, making sure they handle
+ paging etc. correctly if your device needs it. Then you pass it off
+ to a chip probe routine -- either JEDEC or CFI probe or both -- via
+ do_map_probe(). If a chip is recognised, the probe code will invoke the
+ appropriate chip driver (if present) and return a struct mtd_info.
+ At which point, you fill in the mtd->module with your own module
+ address, and register it with the MTD core code. Or you could partition
+ it and register the partitions instead, or keep it for your own private
+ use; whatever.
+
+ The mtd->priv field will point to the struct map_info, and any further
+ private data required by the chip driver is linked from the
+ mtd->priv->fldrv_priv field. This allows the map driver to get at
+ the destructor function map->fldrv_destroy() when it's tired
+ of living.
+*/
+
+struct map_info {
+ const char *name;
+ unsigned long size;
+ resource_size_t phys;
+#define NO_XIP (-1UL)
+
+ void __iomem *virt;
+ void *cached;
+
+ int swap; /* this mapping's byte-swapping requirement */
+ int bankwidth; /* in octets. This isn't necessarily the width
+ of actual bus cycles -- it's the repeat interval
+ in bytes, before you are talking to the first chip again.
+ */
+
+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
+ map_word (*read)(struct map_info *, unsigned long);
+ void (*copy_from)(struct map_info *, void *, unsigned long, ssize_t);
+
+ void (*write)(struct map_info *, const map_word, unsigned long);
+ void (*copy_to)(struct map_info *, unsigned long, const void *, ssize_t);
+
+ /* We can perhaps put in 'point' and 'unpoint' methods, if we really
+ want to enable XIP for non-linear mappings. Not yet though. */
+#endif
+ /* It's possible for the map driver to use cached memory in its
+ copy_from implementation (and _only_ with copy_from). However,
+ when the chip driver knows some flash area has changed contents,
+ it will signal it to the map driver through this routine to let
+ the map driver invalidate the corresponding cache as needed.
+ If there is no cache to care about this can be set to NULL. */
+ void (*inval_cache)(struct map_info *, unsigned long, ssize_t);
+
+ /* set_vpp() must handle being reentered -- enable, enable, disable
+ must leave it enabled. */
+ void (*set_vpp)(struct map_info *, int);
+
+ unsigned long pfow_base;
+ unsigned long map_priv_1;
+ unsigned long map_priv_2;
+ void *fldrv_priv;
+ struct mtd_chip_driver *fldrv;
+};
+
+struct mtd_chip_driver {
+ struct mtd_info *(*probe)(struct map_info *map);
+ void (*destroy)(struct mtd_info *);
+ struct module *module;
+ char *name;
+ struct list_head list;
+};
+
+void register_mtd_chip_driver(struct mtd_chip_driver *);
+void unregister_mtd_chip_driver(struct mtd_chip_driver *);
+
+struct mtd_info *do_map_probe(const char *name, struct map_info *map);
+void map_destroy(struct mtd_info *mtd);
+
+#define ENABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 1); } while(0)
+#define DISABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 0); } while(0)
+
+#define INVALIDATE_CACHED_RANGE(map, from, size) \
+ do { if(map->inval_cache) map->inval_cache(map, from, size); } while(0)
+
+
+static inline int map_word_equal(struct map_info *map, map_word val1, map_word val2)
+{
+ int i;
+ for (i=0; i<map_words(map); i++) {
+ if (val1.x[i] != val2.x[i])
+ return 0;
+ }
+ return 1;
+}
+
+static inline map_word map_word_and(struct map_info *map, map_word val1, map_word val2)
+{
+ map_word r;
+ int i;
+
+ for (i=0; i<map_words(map); i++) {
+ r.x[i] = val1.x[i] & val2.x[i];
+ }
+ return r;
+}
+
+static inline map_word map_word_clr(struct map_info *map, map_word val1, map_word val2)
+{
+ map_word r;
+ int i;
+
+ for (i=0; i<map_words(map); i++) {
+ r.x[i] = val1.x[i] & ~val2.x[i];
+ }
+ return r;
+}
+
+static inline map_word map_word_or(struct map_info *map, map_word val1, map_word val2)
+{
+ map_word r;
+ int i;
+
+ for (i=0; i<map_words(map); i++) {
+ r.x[i] = val1.x[i] | val2.x[i];
+ }
+ return r;
+}
+
+#define map_word_andequal(m, a, b, z) map_word_equal(m, z, map_word_and(m, a, b))
+
+static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word val2)
+{
+ int i;
+
+ for (i=0; i<map_words(map); i++) {
+ if (val1.x[i] & val2.x[i])
+ return 1;
+ }
+ return 0;
+}
+
+static inline map_word map_word_load(struct map_info *map, const void *ptr)
+{
+ map_word r;
+
+ if (map_bankwidth_is_1(map))
+ r.x[0] = *(unsigned char *)ptr;
+ else if (map_bankwidth_is_2(map))
+ r.x[0] = get_unaligned((uint16_t *)ptr);
+ else if (map_bankwidth_is_4(map))
+ r.x[0] = get_unaligned((uint32_t *)ptr);
+#if BITS_PER_LONG >= 64
+ else if (map_bankwidth_is_8(map))
+ r.x[0] = get_unaligned((uint64_t *)ptr);
+#endif
+ else if (map_bankwidth_is_large(map))
+ memcpy(r.x, ptr, map->bankwidth);
+
+ return r;
+}
+
+static inline map_word map_word_load_partial(struct map_info *map, map_word orig, const unsigned char *buf, int start, int len)
+{
+ int i;
+
+ if (map_bankwidth_is_large(map)) {
+ char *dest = (char *)&orig;
+ memcpy(dest+start, buf, len);
+ } else {
+ for (i=start; i < start+len; i++) {
+ int bitpos;
+#ifdef __LITTLE_ENDIAN
+ bitpos = i*8;
+#else /* __BIG_ENDIAN */
+ bitpos = (map_bankwidth(map)-1-i)*8;
+#endif
+ orig.x[0] &= ~(0xff << bitpos);
+ orig.x[0] |= buf[i-start] << bitpos;
+ }
+ }
+ return orig;
+}
+
+#if BITS_PER_LONG < 64
+#define MAP_FF_LIMIT 4
+#else
+#define MAP_FF_LIMIT 8
+#endif
+
+static inline map_word map_word_ff(struct map_info *map)
+{
+ map_word r;
+ int i;
+
+ if (map_bankwidth(map) < MAP_FF_LIMIT) {
+ int bw = 8 * map_bankwidth(map);
+ r.x[0] = (1 << bw) - 1;
+ } else {
+ for (i=0; i<map_words(map); i++)
+ r.x[i] = ~0UL;
+ }
+ return r;
+}
+
+static inline map_word inline_map_read(struct map_info *map, unsigned long ofs)
+{
+ map_word r;
+
+ if (map_bankwidth_is_1(map))
+ r.x[0] = __raw_readb(map->virt + ofs);
+ else if (map_bankwidth_is_2(map))
+ r.x[0] = __raw_readw(map->virt + ofs);
+ else if (map_bankwidth_is_4(map))
+ r.x[0] = __raw_readl(map->virt + ofs);
+#if BITS_PER_LONG >= 64
+ else if (map_bankwidth_is_8(map))
+ r.x[0] = __raw_readq(map->virt + ofs);
+#endif
+ else if (map_bankwidth_is_large(map))
+ memcpy_fromio(r.x, map->virt+ofs, map->bankwidth);
+ else
+ BUG();
+
+ return r;
+}
+
+static inline void inline_map_write(struct map_info *map, const map_word datum, unsigned long ofs)
+{
+ if (map_bankwidth_is_1(map))
+ __raw_writeb(datum.x[0], map->virt + ofs);
+ else if (map_bankwidth_is_2(map))
+ __raw_writew(datum.x[0], map->virt + ofs);
+ else if (map_bankwidth_is_4(map))
+ __raw_writel(datum.x[0], map->virt + ofs);
+#if BITS_PER_LONG >= 64
+ else if (map_bankwidth_is_8(map))
+ __raw_writeq(datum.x[0], map->virt + ofs);
+#endif
+ else if (map_bankwidth_is_large(map))
+ memcpy_toio(map->virt+ofs, datum.x, map->bankwidth);
+ mb();
+}
+
+static inline void inline_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ if (map->cached)
+ memcpy(to, (char *)map->cached + from, len);
+ else
+ memcpy_fromio(to, map->virt + from, len);
+}
+
+static inline void inline_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ memcpy_toio(map->virt + to, from, len);
+}
+
+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
+#define map_read(map, ofs) (map)->read(map, ofs)
+#define map_copy_from(map, to, from, len) (map)->copy_from(map, to, from, len)
+#define map_write(map, datum, ofs) (map)->write(map, datum, ofs)
+#define map_copy_to(map, to, from, len) (map)->copy_to(map, to, from, len)
+
+extern void simple_map_init(struct map_info *);
+#define map_is_linear(map) (map->phys != NO_XIP)
+
+#else
+#define map_read(map, ofs) inline_map_read(map, ofs)
+#define map_copy_from(map, to, from, len) inline_map_copy_from(map, to, from, len)
+#define map_write(map, datum, ofs) inline_map_write(map, datum, ofs)
+#define map_copy_to(map, to, from, len) inline_map_copy_to(map, to, from, len)
+
+
+#define simple_map_init(map) BUG_ON(!map_bankwidth_supported((map)->bankwidth))
+#define map_is_linear(map) ({ (void)(map); 1; })
+
+#endif /* !CONFIG_MTD_COMPLEX_MAPPINGS */
+
+#endif /* __LINUX_MTD_MAP_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
new file mode 100644
index 0000000..a0a61af
--- /dev/null
+++ b/include/linux/mtd/mtd.h
@@ -0,0 +1,353 @@
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __MTD_MTD_H__
+#define __MTD_MTD_H__
+
+#include <linux/types.h>
+#include <linux/uio.h>
+#include <linux/notifier.h>
+#include <linux/device.h>
+
+#include <mtd/mtd-abi.h>
+
+#include <asm/div64.h>
+
+#define MTD_CHAR_MAJOR 90
+#define MTD_BLOCK_MAJOR 31
+
+#define MTD_ERASE_PENDING 0x01
+#define MTD_ERASING 0x02
+#define MTD_ERASE_SUSPEND 0x04
+#define MTD_ERASE_DONE 0x08
+#define MTD_ERASE_FAILED 0x10
+
+#define MTD_FAIL_ADDR_UNKNOWN -1LL
+
+struct erase_info {
+ struct mtd_info *mtd;
+ uint64_t addr;
+ uint64_t len;
+ uint64_t fail_addr;
+ u_long time;
+ u_long retries;
+ unsigned dev;
+ unsigned cell;
+ void (*callback) (struct erase_info *self);
+ u_long priv;
+ u_char state;
+ struct erase_info *next;
+};
+
+struct mtd_erase_region_info {
+ uint64_t offset;
+ uint32_t erasesize;
+ uint32_t numblocks;
+ unsigned long *lockmap;
+};
+
+/**
+ * struct mtd_oob_ops - oob operation operands
+ * @mode: operation mode
+ *
+ * @len: number of data bytes to write/read
+ *
+ * @retlen: number of data bytes written/read
+ *
+ * @ooblen: number of oob bytes to write/read
+ * @oobretlen: number of oob bytes written/read
+ * @ooboffs: offset of oob data in the oob area (only relevant when
+ * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
+ * @datbuf: data buffer - if NULL only oob data are read/written
+ * @oobbuf: oob data buffer
+ *
+ * Note, it is allowed to read more than one OOB area at one go, but not write.
+ * The interface assumes that the OOB write requests program only one page's
+ * OOB area.
+ */
+struct mtd_oob_ops {
+ unsigned int mode;
+ size_t len;
+ size_t retlen;
+ size_t ooblen;
+ size_t oobretlen;
+ uint32_t ooboffs;
+ uint8_t *datbuf;
+ uint8_t *oobbuf;
+};
+
+#define MTD_MAX_OOBFREE_ENTRIES_LARGE 32
+#define MTD_MAX_ECCPOS_ENTRIES_LARGE 448
+struct nand_ecclayout {
+ __u32 eccbytes;
+ __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
+ __u32 oobavail;
+ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
+};
+
+struct module;
+
+struct mtd_info {
+ u_char type;
+ uint32_t flags;
+ uint64_t size;
+
+ uint32_t erasesize;
+ uint32_t writesize;
+
+ uint32_t writebufsize;
+
+ uint32_t oobsize;
+ uint32_t oobavail;
+
+ unsigned int erasesize_shift;
+ unsigned int writesize_shift;
+
+ unsigned int erasesize_mask;
+ unsigned int writesize_mask;
+
+
+ const char *name;
+ int index;
+
+
+ struct nand_ecclayout *ecclayout;
+
+
+ unsigned int ecc_strength;
+
+ int numeraseregions;
+ struct mtd_erase_region_info *eraseregions;
+
+ int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
+ int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, void **virt, resource_size_t *phys);
+ int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
+ unsigned long (*_get_unmapped_area) (struct mtd_info *mtd,
+ unsigned long len,
+ unsigned long offset,
+ unsigned long flags);
+ int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf);
+ int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf);
+ int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf);
+ int (*_read_oob) (struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops);
+ int (*_write_oob) (struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops);
+ int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+ size_t len);
+ int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf);
+ int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+ size_t len);
+ int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+ size_t len, size_t *retlen, u_char *buf);
+ int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
+ size_t len, size_t *retlen, u_char *buf);
+ int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+ size_t len);
+ int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs,
+ unsigned long count, loff_t to, size_t *retlen);
+ void (*_sync) (struct mtd_info *mtd);
+ int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+ int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+ int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+ int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
+ int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
+ int (*_suspend) (struct mtd_info *mtd);
+ void (*_resume) (struct mtd_info *mtd);
+ int (*_get_device) (struct mtd_info *mtd);
+ void (*_put_device) (struct mtd_info *mtd);
+
+ struct backing_dev_info *backing_dev_info;
+
+ struct notifier_block reboot_notifier;
+
+
+ struct mtd_ecc_stats ecc_stats;
+
+ int subpage_sft;
+
+ void *priv;
+
+ struct module *owner;
+ struct device dev;
+ int usecount;
+};
+
+int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
+int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+ void **virt, resource_size_t *phys);
+int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len);
+unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len,
+ unsigned long offset, unsigned long flags);
+int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+ u_char *buf);
+int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+ const u_char *buf);
+int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+ const u_char *buf);
+
+static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ ops->retlen = ops->oobretlen = 0;
+ if (!mtd->_read_oob)
+ return -EOPNOTSUPP;
+ return mtd->_read_oob(mtd, from, ops);
+}
+
+static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ ops->retlen = ops->oobretlen = 0;
+ if (!mtd->_write_oob)
+ return -EOPNOTSUPP;
+ if (!(mtd->flags & MTD_WRITEABLE))
+ return -EROFS;
+ return mtd->_write_oob(mtd, to, ops);
+}
+
+int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+ size_t len);
+int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf);
+int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+ size_t len);
+int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf);
+int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, u_char *buf);
+int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
+
+int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+ unsigned long count, loff_t to, size_t *retlen);
+
+static inline void mtd_sync(struct mtd_info *mtd)
+{
+ if (mtd->_sync)
+ mtd->_sync(mtd);
+}
+
+int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
+int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
+
+static inline int mtd_suspend(struct mtd_info *mtd)
+{
+ return mtd->_suspend ? mtd->_suspend(mtd) : 0;
+}
+
+static inline void mtd_resume(struct mtd_info *mtd)
+{
+ if (mtd->_resume)
+ mtd->_resume(mtd);
+}
+
+static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
+{
+ if (mtd->erasesize_shift)
+ return sz >> mtd->erasesize_shift;
+ do_div(sz, mtd->erasesize);
+ return sz;
+}
+
+static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
+{
+ if (mtd->erasesize_shift)
+ return sz & mtd->erasesize_mask;
+ return do_div(sz, mtd->erasesize);
+}
+
+static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
+{
+ if (mtd->writesize_shift)
+ return sz >> mtd->writesize_shift;
+ do_div(sz, mtd->writesize);
+ return sz;
+}
+
+static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd)
+{
+ if (mtd->writesize_shift)
+ return sz & mtd->writesize_mask;
+ return do_div(sz, mtd->writesize);
+}
+
+static inline int mtd_has_oob(const struct mtd_info *mtd)
+{
+ return mtd->_read_oob && mtd->_write_oob;
+}
+
+static inline int mtd_can_have_bb(const struct mtd_info *mtd)
+{
+ return !!mtd->_block_isbad;
+}
+
+
+
+struct mtd_partition;
+struct mtd_part_parser_data;
+
+extern int mtd_device_parse_register(struct mtd_info *mtd,
+ const char **part_probe_types,
+ struct mtd_part_parser_data *parser_data,
+ const struct mtd_partition *defparts,
+ int defnr_parts);
+#define mtd_device_register(master, parts, nr_parts) \
+ mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
+extern int mtd_device_unregister(struct mtd_info *master);
+extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
+extern int __get_mtd_device(struct mtd_info *mtd);
+extern void __put_mtd_device(struct mtd_info *mtd);
+extern struct mtd_info *get_mtd_device_nm(const char *name);
+extern void put_mtd_device(struct mtd_info *mtd);
+
+
+struct mtd_notifier {
+ void (*add)(struct mtd_info *mtd);
+ void (*remove)(struct mtd_info *mtd);
+ struct list_head list;
+};
+
+
+extern void register_mtd_user (struct mtd_notifier *new);
+extern int unregister_mtd_user (struct mtd_notifier *old);
+void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
+
+void mtd_erase_callback(struct erase_info *instr);
+
+static inline int mtd_is_bitflip(int err) {
+ return err == -EUCLEAN;
+}
+
+static inline int mtd_is_eccerr(int err) {
+ return err == -EBADMSG;
+}
+
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+ return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
+
+#endif
diff --git a/include/linux/mtd/mtdram.h b/include/linux/mtd/mtdram.h
new file mode 100644
index 0000000..6889131
--- /dev/null
+++ b/include/linux/mtd/mtdram.h
@@ -0,0 +1,8 @@
+#ifndef __MTD_MTDRAM_H__
+#define __MTD_MTDRAM_H__
+
+#include <linux/mtd/mtd.h>
+int mtdram_init_device(struct mtd_info *mtd, void *mapped_address,
+ unsigned long size, char *name);
+
+#endif /* __MTD_MTDRAM_H__ */
diff --git a/include/linux/mtd/nand-gpio.h b/include/linux/mtd/nand-gpio.h
new file mode 100644
index 0000000..51534e5
--- /dev/null
+++ b/include/linux/mtd/nand-gpio.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_MTD_NAND_GPIO_H
+#define __LINUX_MTD_NAND_GPIO_H
+
+#include <linux/mtd/nand.h>
+
+struct gpio_nand_platdata {
+ int gpio_nce;
+ int gpio_nwp;
+ int gpio_cle;
+ int gpio_ale;
+ int gpio_rdy;
+ void (*adjust_parts)(struct gpio_nand_platdata *, size_t);
+ struct mtd_partition *parts;
+ unsigned int num_parts;
+ unsigned int options;
+ int chip_delay;
+};
+
+#endif
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
new file mode 100644
index 0000000..ae7d80a
--- /dev/null
+++ b/include/linux/mtd/nand.h
@@ -0,0 +1,410 @@
+/*
+ * linux/include/linux/mtd/nand.h
+ *
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ * Steven J. Hill <sjhill@realitydiluted.com>
+ * Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Info:
+ * Contains standard defines and IDs for NAND flash devices
+ *
+ * Changelog:
+ * See git changelog.
+ */
+#ifndef __LINUX_MTD_NAND_H
+#define __LINUX_MTD_NAND_H
+
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/bbm.h>
+
+struct mtd_info;
+struct nand_flash_dev;
+extern int nand_scan(struct mtd_info *mtd, int max_chips);
+extern int nand_scan_ident(struct mtd_info *mtd, int max_chips,
+ struct nand_flash_dev *table);
+extern int nand_scan_tail(struct mtd_info *mtd);
+
+extern void nand_release(struct mtd_info *mtd);
+
+extern void nand_wait_ready(struct mtd_info *mtd);
+
+extern int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+
+#define NAND_MAX_CHIPS 8
+
+#define NAND_MAX_OOBSIZE 576
+#define NAND_MAX_PAGESIZE 8192
+
+#define NAND_NCE 0x01
+#define NAND_CLE 0x02
+#define NAND_ALE 0x04
+
+#define NAND_CTRL_CLE (NAND_NCE | NAND_CLE)
+#define NAND_CTRL_ALE (NAND_NCE | NAND_ALE)
+#define NAND_CTRL_CHANGE 0x80
+
+#define NAND_CMD_READ0 0
+#define NAND_CMD_READ1 1
+#define NAND_CMD_RNDOUT 5
+#define NAND_CMD_PAGEPROG 0x10
+#define NAND_CMD_READOOB 0x50
+#define NAND_CMD_ERASE1 0x60
+#define NAND_CMD_STATUS 0x70
+#define NAND_CMD_STATUS_MULTI 0x71
+#define NAND_CMD_SEQIN 0x80
+#define NAND_CMD_RNDIN 0x85
+#define NAND_CMD_READID 0x90
+#define NAND_CMD_ERASE2 0xd0
+#define NAND_CMD_PARAM 0xec
+#define NAND_CMD_RESET 0xff
+
+#define NAND_CMD_LOCK 0x2a
+#define NAND_CMD_UNLOCK1 0x23
+#define NAND_CMD_UNLOCK2 0x24
+
+#define NAND_CMD_READSTART 0x30
+#define NAND_CMD_RNDOUTSTART 0xE0
+#define NAND_CMD_CACHEDPROG 0x15
+
+#define NAND_CMD_DEPLETE1 0x100
+#define NAND_CMD_DEPLETE2 0x38
+#define NAND_CMD_STATUS_MULTI 0x71
+#define NAND_CMD_STATUS_ERROR 0x72
+#define NAND_CMD_STATUS_ERROR0 0x73
+#define NAND_CMD_STATUS_ERROR1 0x74
+#define NAND_CMD_STATUS_ERROR2 0x75
+#define NAND_CMD_STATUS_ERROR3 0x76
+#define NAND_CMD_STATUS_RESET 0x7f
+#define NAND_CMD_STATUS_CLEAR 0xff
+
+#define NAND_CMD_NONE -1
+
+#define NAND_STATUS_FAIL 0x01
+#define NAND_STATUS_FAIL_N1 0x02
+#define NAND_STATUS_TRUE_READY 0x20
+#define NAND_STATUS_READY 0x40
+#define NAND_STATUS_WP 0x80
+
+typedef enum {
+ NAND_ECC_NONE,
+ NAND_ECC_SOFT,
+ NAND_ECC_HW,
+ NAND_ECC_HW_SYNDROME,
+ NAND_ECC_HW_OOB_FIRST,
+ NAND_ECC_SOFT_BCH,
+} nand_ecc_modes_t;
+
+#define NAND_ECC_READ 0
+#define NAND_ECC_WRITE 1
+#define NAND_ECC_READSYN 2
+
+#define NAND_GET_DEVICE 0x80
+
+
+#define NAND_NO_AUTOINCR 0x00000001
+#define NAND_BUSWIDTH_16 0x00000002
+#define NAND_NO_PADDING 0x00000004
+#define NAND_CACHEPRG 0x00000008
+#define NAND_COPYBACK 0x00000010
+#define NAND_IS_AND 0x00000020
+#define NAND_4PAGE_ARRAY 0x00000040
+/*
+ * Chip requires that BBT is periodically rewritten to prevent
+ * bits from adjacent blocks from 'leaking' in altering data.
+ * This happens with the Renesas AG-AND chips, possibly others.
+ */
+#define BBT_AUTO_REFRESH 0x00000080
+#define NAND_NO_READRDY 0x00000100
+#define NAND_NO_SUBPAGE_WRITE 0x00000200
+
+#define NAND_BROKEN_XD 0x00000400
+
+#define NAND_ROM 0x00000800
+
+#define NAND_SAMSUNG_LP_OPTIONS \
+ (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
+
+#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR))
+#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
+#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
+#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
+#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
+ && (chip->page_shift > 9))
+
+#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
+
+#define NAND_SKIP_BBTSCAN 0x00010000
+#define NAND_OWN_BUFFERS 0x00020000
+#define NAND_SCAN_SILENT_NODEV 0x00040000
+
+#define NAND_CONTROLLER_ALLOC 0x80000000
+
+#define NAND_CI_CHIPNR_MSK 0x03
+#define NAND_CI_CELLTYPE_MSK 0x0C
+
+struct nand_chip;
+
+struct nand_onfi_params {
+
+
+ u8 sig[4];
+ __le16 revision;
+ __le16 features;
+ __le16 opt_cmd;
+ u8 reserved[22];
+
+
+ char manufacturer[12];
+ char model[20];
+ u8 jedec_id;
+ __le16 date_code;
+ u8 reserved2[13];
+
+
+ __le32 byte_per_page;
+ __le16 spare_bytes_per_page;
+ __le32 data_bytes_per_ppage;
+ __le16 spare_bytes_per_ppage;
+ __le32 pages_per_block;
+ __le32 blocks_per_lun;
+ u8 lun_count;
+ u8 addr_cycles;
+ u8 bits_per_cell;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 guaranteed_good_blocks;
+ __le16 guaranteed_block_endurance;
+ u8 programs_per_page;
+ u8 ppage_attr;
+ u8 ecc_bits;
+ u8 interleaved_bits;
+ u8 interleaved_ops;
+ u8 reserved3[13];
+
+
+ u8 io_pin_capacitance_max;
+ __le16 async_timing_mode;
+ __le16 program_cache_timing_mode;
+ __le16 t_prog;
+ __le16 t_bers;
+ __le16 t_r;
+ __le16 t_ccs;
+ __le16 src_sync_timing_mode;
+ __le16 src_ssync_features;
+ __le16 clk_pin_capacitance_typ;
+ __le16 io_pin_capacitance_typ;
+ __le16 input_pin_capacitance_typ;
+ u8 input_pin_capacitance_max;
+ u8 driver_strenght_support;
+ __le16 t_int_r;
+ __le16 t_ald;
+ u8 reserved4[7];
+
+
+ u8 reserved5[90];
+
+ __le16 crc;
+} __attribute__((packed));
+
+#define ONFI_CRC_BASE 0x4F4E
+
+struct nand_hw_control {
+ spinlock_t lock;
+ struct nand_chip *active;
+ wait_queue_head_t wq;
+};
+
+struct nand_ecc_ctrl {
+ nand_ecc_modes_t mode;
+ int steps;
+ int size;
+ int bytes;
+ int total;
+ int strength;
+ int prepad;
+ int postpad;
+ struct nand_ecclayout *layout;
+ void *priv;
+ void (*hwctl)(struct mtd_info *mtd, int mode);
+ int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
+ uint8_t *ecc_code);
+ int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
+ uint8_t *calc_ecc);
+ int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page);
+ void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf);
+ int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page);
+ int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offs, uint32_t len, uint8_t *buf);
+ void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf);
+ int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+ int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd);
+ int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
+ int sndcmd);
+ int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
+ int page);
+};
+
+struct nand_buffers {
+ uint8_t ecccalc[NAND_MAX_OOBSIZE];
+ uint8_t ecccode[NAND_MAX_OOBSIZE];
+ uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE];
+};
+
+
+struct nand_chip {
+ void __iomem *IO_ADDR_R;
+ void __iomem *IO_ADDR_W;
+
+ uint8_t (*read_byte)(struct mtd_info *mtd);
+ u16 (*read_word)(struct mtd_info *mtd);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
+ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ int (*init_size)(struct mtd_info *mtd, struct nand_chip *this,
+ u8 *id_data);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
+ int page_addr);
+ int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
+ void (*erase_cmd)(struct mtd_info *mtd, int page);
+ int (*scan_bbt)(struct mtd_info *mtd);
+ int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
+ int status, int page);
+ int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int page, int cached, int raw);
+
+ int chip_delay;
+ unsigned int options;
+ unsigned int bbt_options;
+
+ int page_shift;
+ int phys_erase_shift;
+ int bbt_erase_shift;
+ int chip_shift;
+ int numchips;
+ uint64_t chipsize;
+ int pagemask;
+ int pagebuf;
+ int subpagesize;
+ uint8_t cellinfo;
+ int badblockpos;
+ int badblockbits;
+
+ int onfi_version;
+ struct nand_onfi_params onfi_params;
+
+ flstate_t state;
+
+ uint8_t *oob_poi;
+ struct nand_hw_control *controller;
+ struct nand_ecclayout *ecclayout;
+
+ struct nand_ecc_ctrl ecc;
+ struct nand_buffers *buffers;
+ struct nand_hw_control hwcontrol;
+
+ uint8_t *bbt;
+ struct nand_bbt_descr *bbt_td;
+ struct nand_bbt_descr *bbt_md;
+
+ struct nand_bbt_descr *badblock_pattern;
+
+ void *priv;
+};
+
+#define NAND_MFR_TOSHIBA 0x98
+#define NAND_MFR_SAMSUNG 0xec
+#define NAND_MFR_FUJITSU 0x04
+#define NAND_MFR_NATIONAL 0x8f
+#define NAND_MFR_RENESAS 0x07
+#define NAND_MFR_STMICRO 0x20
+#define NAND_MFR_HYNIX 0xad
+#define NAND_MFR_MICRON 0x2c
+#define NAND_MFR_AMD 0x01
+#define NAND_MFR_MACRONIX 0xc2
+
+struct nand_flash_dev {
+ char *name;
+ int id;
+ unsigned long pagesize;
+ unsigned long chipsize;
+ unsigned long erasesize;
+ unsigned long options;
+};
+
+struct nand_manufacturers {
+ int id;
+ char *name;
+};
+
+extern struct nand_flash_dev nand_flash_ids[];
+extern struct nand_manufacturers nand_manuf_ids[];
+
+extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
+extern int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
+extern int nand_default_bbt(struct mtd_info *mtd);
+extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
+extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
+ int allowbbt);
+extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, uint8_t *buf);
+
+struct platform_nand_chip {
+ int nr_chips;
+ int chip_offset;
+ int nr_partitions;
+ struct mtd_partition *partitions;
+ struct nand_ecclayout *ecclayout;
+ int chip_delay;
+ unsigned int options;
+ unsigned int bbt_options;
+ const char **part_probe_types;
+};
+
+struct platform_device;
+
+struct platform_nand_ctrl {
+ int (*probe)(struct platform_device *pdev);
+ void (*remove)(struct platform_device *pdev);
+ void (*hwcontrol)(struct mtd_info *mtd, int cmd);
+ int (*dev_ready)(struct mtd_info *mtd);
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+ void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
+ void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
+ void *priv;
+};
+
+struct platform_nand_data {
+ struct platform_nand_chip chip;
+ struct platform_nand_ctrl ctrl;
+};
+
+static inline
+struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ return chip->priv;
+}
+
+#endif
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
new file mode 100644
index 0000000..74acf53
--- /dev/null
+++ b/include/linux/mtd/nand_bch.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright © 2011 Ivan Djelic <ivan.djelic@parrot.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file is the header for the NAND BCH ECC implementation.
+ */
+
+#ifndef __MTD_NAND_BCH_H__
+#define __MTD_NAND_BCH_H__
+
+struct mtd_info;
+struct nand_bch_control;
+
+#if defined(CONFIG_MTD_NAND_ECC_BCH)
+
+static inline int mtd_nand_has_bch(void) { return 1; }
+
+/*
+ * Calculate BCH ecc code
+ */
+int nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code);
+
+/*
+ * Detect and correct bit errors
+ */
+int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc,
+ u_char *calc_ecc);
+/*
+ * Initialize BCH encoder/decoder
+ */
+struct nand_bch_control *
+nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
+ unsigned int eccbytes, struct nand_ecclayout **ecclayout);
+/*
+ * Release BCH encoder/decoder resources
+ */
+void nand_bch_free(struct nand_bch_control *nbc);
+
+#else /* !CONFIG_MTD_NAND_ECC_BCH */
+
+static inline int mtd_nand_has_bch(void) { return 0; }
+
+static inline int
+nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ return -1;
+}
+
+static inline int
+nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ return -1;
+}
+
+static inline struct nand_bch_control *
+nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
+ unsigned int eccbytes, struct nand_ecclayout **ecclayout)
+{
+ return NULL;
+}
+
+static inline void nand_bch_free(struct nand_bch_control *nbc) {}
+
+#endif /* CONFIG_MTD_NAND_ECC_BCH */
+
+#endif /* __MTD_NAND_BCH_H__ */
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
new file mode 100644
index 0000000..4d8406c
--- /dev/null
+++ b/include/linux/mtd/nand_ecc.h
@@ -0,0 +1,42 @@
+/*
+ * drivers/mtd/nand_ecc.h
+ *
+ * Copyright (C) 2000-2010 Steven J. Hill <sjhill@realitydiluted.com>
+ * David Woodhouse <dwmw2@infradead.org>
+ * Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file is the header for the ECC algorithm.
+ */
+
+#ifndef __MTD_NAND_ECC_H__
+#define __MTD_NAND_ECC_H__
+
+struct mtd_info;
+
+/*
+ * Calculate 3 byte ECC code for eccsize byte block
+ */
+void __nand_calculate_ecc(const u_char *dat, unsigned int eccsize,
+ u_char *ecc_code);
+
+/*
+ * Calculate 3 byte ECC code for 256/512 byte block
+ */
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
+
+/*
+ * Detect and correct a 1 bit error for eccsize byte block
+ */
+int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc,
+ unsigned int eccsize);
+
+/*
+ * Detect and correct a 1 bit error for 256/512 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+
+#endif /* __MTD_NAND_ECC_H__ */
diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h
new file mode 100644
index 0000000..d0558a9
--- /dev/null
+++ b/include/linux/mtd/ndfc.h
@@ -0,0 +1,67 @@
+/*
+ * linux/include/linux/mtd/ndfc.h
+ *
+ * Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Info:
+ * Contains defines, datastructures for ndfc nand controller
+ *
+ */
+#ifndef __LINUX_MTD_NDFC_H
+#define __LINUX_MTD_NDFC_H
+
+/* NDFC Register definitions */
+#define NDFC_CMD 0x00
+#define NDFC_ALE 0x04
+#define NDFC_DATA 0x08
+#define NDFC_ECC 0x10
+#define NDFC_BCFG0 0x30
+#define NDFC_BCFG1 0x34
+#define NDFC_BCFG2 0x38
+#define NDFC_BCFG3 0x3c
+#define NDFC_CCR 0x40
+#define NDFC_STAT 0x44
+#define NDFC_HWCTL 0x48
+#define NDFC_REVID 0x50
+
+#define NDFC_STAT_IS_READY 0x01000000
+
+#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */
+#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */
+#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */
+#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */
+#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */
+#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */
+#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */
+#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */
+#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */
+#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */
+#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */
+#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */
+#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */
+#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */
+#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */
+#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */
+
+#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */
+#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */
+#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */
+#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */
+#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */
+
+#define NDFC_MAX_BANKS 4
+
+struct ndfc_controller_settings {
+ uint32_t ccr_settings;
+ uint64_t ndfc_erpn;
+};
+
+struct ndfc_chip_settings {
+ uint32_t bank_settings;
+};
+
+#endif
diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h
new file mode 100644
index 0000000..b059629
--- /dev/null
+++ b/include/linux/mtd/nftl.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __MTD_NFTL_H__
+#define __MTD_NFTL_H__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/blktrans.h>
+
+#include <mtd/nftl-user.h>
+
+/* these info are used in ReplUnitTable */
+#define BLOCK_NIL 0xffff /* last block of a chain */
+#define BLOCK_FREE 0xfffe /* free block */
+#define BLOCK_NOTEXPLORED 0xfffd /* non explored block, only used during mounting */
+#define BLOCK_RESERVED 0xfffc /* bios block or bad block */
+
+struct NFTLrecord {
+ struct mtd_blktrans_dev mbd;
+ __u16 MediaUnit, SpareMediaUnit;
+ __u32 EraseSize;
+ struct NFTLMediaHeader MediaHdr;
+ int usecount;
+ unsigned char heads;
+ unsigned char sectors;
+ unsigned short cylinders;
+ __u16 numvunits;
+ __u16 lastEUN; /* should be suppressed */
+ __u16 numfreeEUNs;
+ __u16 LastFreeEUN; /* To speed up finding a free EUN */
+ int head,sect,cyl;
+ __u16 *EUNtable; /* [numvunits]: First EUN for each virtual unit */
+ __u16 *ReplUnitTable; /* [numEUNs]: ReplUnitNumber for each */
+ unsigned int nb_blocks; /* number of physical blocks */
+ unsigned int nb_boot_blocks; /* number of blocks used by the bios */
+ struct erase_info instr;
+ struct nand_ecclayout oobinfo;
+};
+
+int NFTL_mount(struct NFTLrecord *s);
+int NFTL_formatblock(struct NFTLrecord *s, int block);
+
+int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf);
+int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len,
+ size_t *retlen, uint8_t *buf);
+
+#ifndef NFTL_MAJOR
+#define NFTL_MAJOR 93
+#endif
+
+#define MAX_NFTLS 16
+#define MAX_SECTORS_PER_UNIT 64
+#define NFTL_PARTN_BITS 4
+
+#endif /* __MTD_NFTL_H__ */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
new file mode 100644
index 0000000..4596503
--- /dev/null
+++ b/include/linux/mtd/onenand.h
@@ -0,0 +1,242 @@
+/*
+ * linux/include/linux/mtd/onenand.h
+ *
+ * Copyright © 2005-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MTD_ONENAND_H
+#define __LINUX_MTD_ONENAND_H
+
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/mtd/bbm.h>
+
+#define MAX_DIES 2
+#define MAX_BUFFERRAM 2
+
+/* Scan and identify a OneNAND device */
+extern int onenand_scan(struct mtd_info *mtd, int max_chips);
+/* Free resources held by the OneNAND device */
+extern void onenand_release(struct mtd_info *mtd);
+
+/**
+ * struct onenand_bufferram - OneNAND BufferRAM Data
+ * @blockpage: block & page address in BufferRAM
+ */
+struct onenand_bufferram {
+ int blockpage;
+};
+
+/**
+ * struct onenand_chip - OneNAND Private Flash Chip Data
+ * @base: [BOARDSPECIFIC] address to access OneNAND
+ * @dies: [INTERN][FLEX-ONENAND] number of dies on chip
+ * @boundary: [INTERN][FLEX-ONENAND] Boundary of the dies
+ * @diesize: [INTERN][FLEX-ONENAND] Size of the dies
+ * @chipsize: [INTERN] the size of one chip for multichip arrays
+ * FIXME For Flex-OneNAND, chipsize holds maximum possible
+ * device size ie when all blocks are considered MLC
+ * @device_id: [INTERN] device ID
+ * @density_mask: chip density, used for DDP devices
+ * @verstion_id: [INTERN] version ID
+ * @options: [BOARDSPECIFIC] various chip options. They can
+ * partly be set to inform onenand_scan about
+ * @erase_shift: [INTERN] number of address bits in a block
+ * @page_shift: [INTERN] number of address bits in a page
+ * @page_mask: [INTERN] a page per block mask
+ * @writesize: [INTERN] a real page size
+ * @bufferram_index: [INTERN] BufferRAM index
+ * @bufferram: [INTERN] BufferRAM info
+ * @readw: [REPLACEABLE] hardware specific function for read short
+ * @writew: [REPLACEABLE] hardware specific function for write short
+ * @command: [REPLACEABLE] hardware specific function for writing
+ * commands to the chip
+ * @wait: [REPLACEABLE] hardware specific function for wait on ready
+ * @bbt_wait: [REPLACEABLE] hardware specific function for bbt wait on ready
+ * @unlock_all: [REPLACEABLE] hardware specific function for unlock all
+ * @read_bufferram: [REPLACEABLE] hardware specific function for BufferRAM Area
+ * @write_bufferram: [REPLACEABLE] hardware specific function for BufferRAM Area
+ * @read_word: [REPLACEABLE] hardware specific function for read
+ * register of OneNAND
+ * @write_word: [REPLACEABLE] hardware specific function for write
+ * register of OneNAND
+ * @mmcontrol: sync burst read function
+ * @chip_probe: [REPLACEABLE] hardware specific function for chip probe
+ * @block_markbad: function to mark a block as bad
+ * @scan_bbt: [REPLACEALBE] hardware specific function for scanning
+ * Bad block Table
+ * @chip_lock: [INTERN] spinlock used to protect access to this
+ * structure and the chip
+ * @wq: [INTERN] wait queue to sleep on if a OneNAND
+ * operation is in progress
+ * @state: [INTERN] the current state of the OneNAND device
+ * @page_buf: [INTERN] page main data buffer
+ * @oob_buf: [INTERN] page oob data buffer
+ * @subpagesize: [INTERN] holds the subpagesize
+ * @ecclayout: [REPLACEABLE] the default ecc placement scheme
+ * @bbm: [REPLACEABLE] pointer to Bad Block Management
+ * @priv: [OPTIONAL] pointer to private chip date
+ */
+struct onenand_chip {
+ void __iomem *base;
+ unsigned dies;
+ unsigned boundary[MAX_DIES];
+ loff_t diesize[MAX_DIES];
+ unsigned int chipsize;
+ unsigned int device_id;
+ unsigned int version_id;
+ unsigned int technology;
+ unsigned int density_mask;
+ unsigned int options;
+
+ unsigned int erase_shift;
+ unsigned int page_shift;
+ unsigned int page_mask;
+ unsigned int writesize;
+
+ unsigned int bufferram_index;
+ struct onenand_bufferram bufferram[MAX_BUFFERRAM];
+
+ int (*command)(struct mtd_info *mtd, int cmd, loff_t address, size_t len);
+ int (*wait)(struct mtd_info *mtd, int state);
+ int (*bbt_wait)(struct mtd_info *mtd, int state);
+ void (*unlock_all)(struct mtd_info *mtd);
+ int (*read_bufferram)(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset, size_t count);
+ int (*write_bufferram)(struct mtd_info *mtd, int area,
+ const unsigned char *buffer, int offset, size_t count);
+ unsigned short (*read_word)(void __iomem *addr);
+ void (*write_word)(unsigned short value, void __iomem *addr);
+ void (*mmcontrol)(struct mtd_info *mtd, int sync_read);
+ int (*chip_probe)(struct mtd_info *mtd);
+ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
+ int (*scan_bbt)(struct mtd_info *mtd);
+ int (*enable)(struct mtd_info *mtd);
+ int (*disable)(struct mtd_info *mtd);
+
+ struct completion complete;
+ int irq;
+
+ spinlock_t chip_lock;
+ wait_queue_head_t wq;
+ flstate_t state;
+ unsigned char *page_buf;
+ unsigned char *oob_buf;
+#ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
+ unsigned char *verify_buf;
+#endif
+
+ int subpagesize;
+ struct nand_ecclayout *ecclayout;
+
+ void *bbm;
+
+ void *priv;
+
+ /*
+ * Shows that the current operation is composed
+ * of sequence of commands. For example, cache program.
+ * Such command status OnGo bit is checked at the end of
+ * sequence.
+ */
+ unsigned int ongoing;
+};
+
+/*
+ * Helper macros
+ */
+#define ONENAND_PAGES_PER_BLOCK (1<<6)
+
+#define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index)
+#define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1)
+#define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1)
+#define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1)
+#define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0)
+#define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1)
+
+#define FLEXONENAND(this) \
+ (this->device_id & DEVICE_IS_FLEXONENAND)
+#define ONENAND_GET_SYS_CFG1(this) \
+ (this->read_word(this->base + ONENAND_REG_SYS_CFG1))
+#define ONENAND_SET_SYS_CFG1(v, this) \
+ (this->write_word(v, this->base + ONENAND_REG_SYS_CFG1))
+
+#define ONENAND_IS_DDP(this) \
+ (this->device_id & ONENAND_DEVICE_IS_DDP)
+
+#define ONENAND_IS_MLC(this) \
+ (this->technology & ONENAND_TECHNOLOGY_IS_MLC)
+
+#ifdef CONFIG_MTD_ONENAND_2X_PROGRAM
+#define ONENAND_IS_2PLANE(this) \
+ (this->options & ONENAND_HAS_2PLANE)
+#else
+#define ONENAND_IS_2PLANE(this) (0)
+#endif
+
+#define ONENAND_IS_CACHE_PROGRAM(this) \
+ (this->options & ONENAND_HAS_CACHE_PROGRAM)
+
+#define ONENAND_IS_NOP_1(this) \
+ (this->options & ONENAND_HAS_NOP_1)
+
+/* Check byte access in OneNAND */
+#define ONENAND_CHECK_BYTE_ACCESS(addr) (addr & 0x1)
+
+/*
+ * Options bits
+ */
+#define ONENAND_HAS_CONT_LOCK (0x0001)
+#define ONENAND_HAS_UNLOCK_ALL (0x0002)
+#define ONENAND_HAS_2PLANE (0x0004)
+#define ONENAND_HAS_4KB_PAGE (0x0008)
+#define ONENAND_HAS_CACHE_PROGRAM (0x0010)
+#define ONENAND_HAS_NOP_1 (0x0020)
+#define ONENAND_SKIP_UNLOCK_CHECK (0x0100)
+#define ONENAND_PAGEBUF_ALLOC (0x1000)
+#define ONENAND_OOBBUF_ALLOC (0x2000)
+#define ONENAND_SKIP_INITIAL_UNLOCKING (0x4000)
+
+#define ONENAND_IS_4KB_PAGE(this) \
+ (this->options & ONENAND_HAS_4KB_PAGE)
+
+/*
+ * OneNAND Flash Manufacturer ID Codes
+ */
+#define ONENAND_MFR_SAMSUNG 0xec
+#define ONENAND_MFR_NUMONYX 0x20
+
+/**
+ * struct onenand_manufacturers - NAND Flash Manufacturer ID Structure
+ * @name: Manufacturer name
+ * @id: manufacturer ID code of device.
+*/
+struct onenand_manufacturers {
+ int id;
+ char *name;
+};
+
+int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops);
+unsigned onenand_block(struct onenand_chip *this, loff_t addr);
+loff_t onenand_addr(struct onenand_chip *this, int block);
+int flexonenand_region(struct mtd_info *mtd, loff_t addr);
+
+struct mtd_partition;
+
+struct onenand_platform_data {
+ void (*mmcontrol)(struct mtd_info *mtd, int sync_read);
+ int (*read_bufferram)(struct mtd_info *mtd, int area,
+ unsigned char *buffer, int offset, size_t count);
+ struct mtd_partition *parts;
+ unsigned int nr_parts;
+};
+
+#endif /* __LINUX_MTD_ONENAND_H */
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
new file mode 100644
index 0000000..d60130f
--- /dev/null
+++ b/include/linux/mtd/onenand_regs.h
@@ -0,0 +1,223 @@
+/*
+ * linux/include/linux/mtd/onenand_regs.h
+ *
+ * OneNAND Register header file
+ *
+ * Copyright (C) 2005-2007 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ONENAND_REG_H
+#define __ONENAND_REG_H
+
+/* Memory Address Map Translation (Word order) */
+#define ONENAND_MEMORY_MAP(x) ((x) << 1)
+
+/*
+ * External BufferRAM area
+ */
+#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000)
+#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200)
+#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010)
+
+/*
+ * OneNAND Registers
+ */
+#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000)
+#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001)
+#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002)
+#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003)
+#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004)
+#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005)
+#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006)
+
+#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100)
+#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101)
+#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102)
+#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103)
+#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104)
+#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105)
+#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106)
+#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107)
+
+#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200)
+#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220)
+#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221)
+#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222)
+#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240)
+#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241)
+#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C)
+#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D)
+#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E)
+
+#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00)
+#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01)
+#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02)
+#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03)
+#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04)
+#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05)
+#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06)
+#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07)
+#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08)
+
+/*
+ * Device ID Register F001h (R)
+ */
+#define DEVICE_IS_FLEXONENAND (1 << 9)
+#define FLEXONENAND_PI_MASK (0x3ff)
+#define FLEXONENAND_PI_UNLOCK_SHIFT (14)
+#define ONENAND_DEVICE_DENSITY_MASK (0xf)
+#define ONENAND_DEVICE_DENSITY_SHIFT (4)
+#define ONENAND_DEVICE_IS_DDP (1 << 3)
+#define ONENAND_DEVICE_IS_DEMUX (1 << 2)
+#define ONENAND_DEVICE_VCC_MASK (0x3)
+
+#define ONENAND_DEVICE_DENSITY_512Mb (0x002)
+#define ONENAND_DEVICE_DENSITY_1Gb (0x003)
+#define ONENAND_DEVICE_DENSITY_2Gb (0x004)
+#define ONENAND_DEVICE_DENSITY_4Gb (0x005)
+
+/*
+ * Version ID Register F002h (R)
+ */
+#define ONENAND_VERSION_PROCESS_SHIFT (8)
+
+/*
+ * Technology Register F006h (R)
+ */
+#define ONENAND_TECHNOLOGY_IS_MLC (1 << 0)
+
+/*
+ * Start Address 1 F100h (R/W) & Start Address 2 F101h (R/W)
+ */
+#define ONENAND_DDP_SHIFT (15)
+#define ONENAND_DDP_CHIP0 (0)
+#define ONENAND_DDP_CHIP1 (1 << ONENAND_DDP_SHIFT)
+
+/*
+ * Start Address 8 F107h (R/W)
+ */
+/* Note: It's actually 0x3f in case of SLC */
+#define ONENAND_FPA_MASK (0x7f)
+#define ONENAND_FPA_SHIFT (2)
+#define ONENAND_FSA_MASK (0x03)
+
+/*
+ * Start Buffer Register F200h (R/W)
+ */
+#define ONENAND_BSA_MASK (0x03)
+#define ONENAND_BSA_SHIFT (8)
+#define ONENAND_BSA_BOOTRAM (0 << 2)
+#define ONENAND_BSA_DATARAM0 (2 << 2)
+#define ONENAND_BSA_DATARAM1 (3 << 2)
+/* Note: It's actually 0x03 in case of SLC */
+#define ONENAND_BSC_MASK (0x07)
+
+/*
+ * Command Register F220h (R/W)
+ */
+#define ONENAND_CMD_READ (0x00)
+#define ONENAND_CMD_READOOB (0x13)
+#define ONENAND_CMD_PROG (0x80)
+#define ONENAND_CMD_PROGOOB (0x1A)
+#define ONENAND_CMD_2X_PROG (0x7D)
+#define ONENAND_CMD_2X_CACHE_PROG (0x7F)
+#define ONENAND_CMD_UNLOCK (0x23)
+#define ONENAND_CMD_LOCK (0x2A)
+#define ONENAND_CMD_LOCK_TIGHT (0x2C)
+#define ONENAND_CMD_UNLOCK_ALL (0x27)
+#define ONENAND_CMD_ERASE (0x94)
+#define ONENAND_CMD_MULTIBLOCK_ERASE (0x95)
+#define ONENAND_CMD_ERASE_VERIFY (0x71)
+#define ONENAND_CMD_RESET (0xF0)
+#define ONENAND_CMD_OTP_ACCESS (0x65)
+#define ONENAND_CMD_READID (0x90)
+#define FLEXONENAND_CMD_PI_UPDATE (0x05)
+#define FLEXONENAND_CMD_PI_ACCESS (0x66)
+#define FLEXONENAND_CMD_RECOVER_LSB (0x05)
+
+/* NOTE: Those are not *REAL* commands */
+#define ONENAND_CMD_BUFFERRAM (0x1978)
+#define FLEXONENAND_CMD_READ_PI (0x1985)
+
+/*
+ * System Configuration 1 Register F221h (R, R/W)
+ */
+#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15)
+#define ONENAND_SYS_CFG1_BRL_7 (7 << 12)
+#define ONENAND_SYS_CFG1_BRL_6 (6 << 12)
+#define ONENAND_SYS_CFG1_BRL_5 (5 << 12)
+#define ONENAND_SYS_CFG1_BRL_4 (4 << 12)
+#define ONENAND_SYS_CFG1_BRL_3 (3 << 12)
+#define ONENAND_SYS_CFG1_BRL_10 (2 << 12)
+#define ONENAND_SYS_CFG1_BRL_9 (1 << 12)
+#define ONENAND_SYS_CFG1_BRL_8 (0 << 12)
+#define ONENAND_SYS_CFG1_BRL_SHIFT (12)
+#define ONENAND_SYS_CFG1_BL_32 (4 << 9)
+#define ONENAND_SYS_CFG1_BL_16 (3 << 9)
+#define ONENAND_SYS_CFG1_BL_8 (2 << 9)
+#define ONENAND_SYS_CFG1_BL_4 (1 << 9)
+#define ONENAND_SYS_CFG1_BL_CONT (0 << 9)
+#define ONENAND_SYS_CFG1_BL_SHIFT (9)
+#define ONENAND_SYS_CFG1_NO_ECC (1 << 8)
+#define ONENAND_SYS_CFG1_RDY (1 << 7)
+#define ONENAND_SYS_CFG1_INT (1 << 6)
+#define ONENAND_SYS_CFG1_IOBE (1 << 5)
+#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4)
+#define ONENAND_SYS_CFG1_VHF (1 << 3)
+#define ONENAND_SYS_CFG1_HF (1 << 2)
+#define ONENAND_SYS_CFG1_SYNC_WRITE (1 << 1)
+
+/*
+ * Controller Status Register F240h (R)
+ */
+#define ONENAND_CTRL_ONGO (1 << 15)
+#define ONENAND_CTRL_LOCK (1 << 14)
+#define ONENAND_CTRL_LOAD (1 << 13)
+#define ONENAND_CTRL_PROGRAM (1 << 12)
+#define ONENAND_CTRL_ERASE (1 << 11)
+#define ONENAND_CTRL_ERROR (1 << 10)
+#define ONENAND_CTRL_RSTB (1 << 7)
+#define ONENAND_CTRL_OTP_L (1 << 6)
+#define ONENAND_CTRL_OTP_BL (1 << 5)
+
+/*
+ * Interrupt Status Register F241h (R)
+ */
+#define ONENAND_INT_MASTER (1 << 15)
+#define ONENAND_INT_READ (1 << 7)
+#define ONENAND_INT_WRITE (1 << 6)
+#define ONENAND_INT_ERASE (1 << 5)
+#define ONENAND_INT_RESET (1 << 4)
+#define ONENAND_INT_CLEAR (0 << 0)
+
+/*
+ * NAND Flash Write Protection Status Register F24Eh (R)
+ */
+#define ONENAND_WP_US (1 << 2)
+#define ONENAND_WP_LS (1 << 1)
+#define ONENAND_WP_LTS (1 << 0)
+
+/*
+ * ECC Status Reigser FF00h (R)
+ */
+#define ONENAND_ECC_1BIT (1 << 0)
+#define ONENAND_ECC_1BIT_ALL (0x5555)
+#define ONENAND_ECC_2BIT (1 << 1)
+#define ONENAND_ECC_2BIT_ALL (0xAAAA)
+#define FLEXONENAND_UNCORRECTABLE_ERROR (0x1010)
+#define ONENAND_ECC_3BIT (1 << 2)
+#define ONENAND_ECC_4BIT (1 << 3)
+#define ONENAND_ECC_4BIT_UNCORRECTABLE (0x1010)
+
+/*
+ * One-Time Programmable (OTP)
+ */
+#define FLEXONENAND_OTP_LOCK_OFFSET (2048)
+#define ONENAND_OTP_LOCK_OFFSET (14)
+
+#endif /* __ONENAND_REG_H */
diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h
new file mode 100644
index 0000000..15c93ba
--- /dev/null
+++ b/include/linux/mtd/partitions.h
@@ -0,0 +1,58 @@
+/*
+ * MTD partitioning layer definitions
+ *
+ * (C) 2000 Nicolas Pitre <nico@fluxnic.net>
+ *
+ * This code is GPL
+ */
+
+#ifndef MTD_PARTITIONS_H
+#define MTD_PARTITIONS_H
+
+#include <linux/types.h>
+
+
+
+struct mtd_partition {
+ char *name;
+ uint64_t size;
+ uint64_t offset;
+ uint32_t mask_flags;
+ struct nand_ecclayout *ecclayout;
+};
+
+#define MTDPART_OFS_RETAIN (-3)
+#define MTDPART_OFS_NXTBLK (-2)
+#define MTDPART_OFS_APPEND (-1)
+#define MTDPART_SIZ_FULL (0)
+
+
+struct mtd_info;
+struct device_node;
+
+struct mtd_part_parser_data {
+ unsigned long origin;
+ struct device_node *of_node;
+};
+
+
+void part_fill_badblockstats(struct mtd_info *mtd);
+
+
+struct mtd_part_parser {
+ struct list_head list;
+ struct module *owner;
+ const char *name;
+ int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
+ struct mtd_part_parser_data *);
+};
+
+extern int register_mtd_parser(struct mtd_part_parser *parser);
+extern int deregister_mtd_parser(struct mtd_part_parser *parser);
+
+int mtd_is_partition(struct mtd_info *mtd);
+int mtd_add_partition(struct mtd_info *master, char *name,
+ long long offset, long long length);
+int mtd_del_partition(struct mtd_info *master, int partno);
+
+#endif
diff --git a/include/linux/mtd/pfow.h b/include/linux/mtd/pfow.h
new file mode 100644
index 0000000..b730d4f
--- /dev/null
+++ b/include/linux/mtd/pfow.h
@@ -0,0 +1,159 @@
+/* Primary function overlay window definitions
+ * and service functions used by LPDDR chips
+ */
+#ifndef __LINUX_MTD_PFOW_H
+#define __LINUX_MTD_PFOW_H
+
+#include <linux/mtd/qinfo.h>
+
+/* PFOW registers addressing */
+/* Address of symbol "P" */
+#define PFOW_QUERY_STRING_P 0x0000
+/* Address of symbol "F" */
+#define PFOW_QUERY_STRING_F 0x0002
+/* Address of symbol "O" */
+#define PFOW_QUERY_STRING_O 0x0004
+/* Address of symbol "W" */
+#define PFOW_QUERY_STRING_W 0x0006
+/* Identification info for LPDDR chip */
+#define PFOW_MANUFACTURER_ID 0x0020
+#define PFOW_DEVICE_ID 0x0022
+/* Address in PFOW where prog buffer can can be found */
+#define PFOW_PROGRAM_BUFFER_OFFSET 0x0040
+/* Size of program buffer in words */
+#define PFOW_PROGRAM_BUFFER_SIZE 0x0042
+/* Address command code register */
+#define PFOW_COMMAND_CODE 0x0080
+/* command data register */
+#define PFOW_COMMAND_DATA 0x0084
+/* command address register lower address bits */
+#define PFOW_COMMAND_ADDRESS_L 0x0088
+/* command address register upper address bits */
+#define PFOW_COMMAND_ADDRESS_H 0x008a
+/* number of bytes to be proggrammed lower address bits */
+#define PFOW_DATA_COUNT_L 0x0090
+/* number of bytes to be proggrammed higher address bits */
+#define PFOW_DATA_COUNT_H 0x0092
+/* command execution register, the only possible value is 0x01 */
+#define PFOW_COMMAND_EXECUTE 0x00c0
+/* 0x01 should be written at this address to clear buffer */
+#define PFOW_CLEAR_PROGRAM_BUFFER 0x00c4
+/* device program/erase suspend register */
+#define PFOW_PROGRAM_ERASE_SUSPEND 0x00c8
+/* device status register */
+#define PFOW_DSR 0x00cc
+
+/* LPDDR memory device command codes */
+/* They are possible values of PFOW command code register */
+#define LPDDR_WORD_PROGRAM 0x0041
+#define LPDDR_BUFF_PROGRAM 0x00E9
+#define LPDDR_BLOCK_ERASE 0x0020
+#define LPDDR_LOCK_BLOCK 0x0061
+#define LPDDR_UNLOCK_BLOCK 0x0062
+#define LPDDR_READ_BLOCK_LOCK_STATUS 0x0065
+#define LPDDR_INFO_QUERY 0x0098
+#define LPDDR_READ_OTP 0x0097
+#define LPDDR_PROG_OTP 0x00C0
+#define LPDDR_RESUME 0x00D0
+
+/* Defines possible value of PFOW command execution register */
+#define LPDDR_START_EXECUTION 0x0001
+
+/* Defines possible value of PFOW program/erase suspend register */
+#define LPDDR_SUSPEND 0x0001
+
+/* Possible values of PFOW device status register */
+/* access R - read; RC read & clearable */
+#define DSR_DPS (1<<1) /* RC; device protect status
+ * 0 - not protected 1 - locked */
+#define DSR_PSS (1<<2) /* R; program suspend status;
+ * 0-prog in progress/completed,
+ * 1- prog suspended */
+#define DSR_VPPS (1<<3) /* RC; 0-Vpp OK, * 1-Vpp low */
+#define DSR_PROGRAM_STATUS (1<<4) /* RC; 0-successful, 1-error */
+#define DSR_ERASE_STATUS (1<<5) /* RC; erase or blank check status;
+ * 0-success erase/blank check,
+ * 1 blank check error */
+#define DSR_ESS (1<<6) /* R; erase suspend status;
+ * 0-erase in progress/complete,
+ * 1 erase suspended */
+#define DSR_READY_STATUS (1<<7) /* R; Device status
+ * 0-busy,
+ * 1-ready */
+#define DSR_RPS (0x3<<8) /* RC; region program status
+ * 00 - Success,
+ * 01-re-program attempt in region with
+ * object mode data,
+ * 10-object mode program w attempt in
+ * region with control mode data
+ * 11-attempt to program invalid half
+ * with 0x41 command */
+#define DSR_AOS (1<<12) /* RC; 1- AO related failure */
+#define DSR_AVAILABLE (1<<15) /* R; Device availbility
+ * 1 - Device available
+ * 0 - not available */
+
+/* The superset of all possible error bits in DSR */
+#define DSR_ERR 0x133A
+
+static inline void send_pfow_command(struct map_info *map,
+ unsigned long cmd_code, unsigned long adr,
+ unsigned long len, map_word *datum)
+{
+ int bits_per_chip = map_bankwidth(map) * 8;
+ int chipnum;
+ struct lpddr_private *lpddr = map->fldrv_priv;
+ chipnum = adr >> lpddr->chipshift;
+
+ map_write(map, CMD(cmd_code), map->pfow_base + PFOW_COMMAND_CODE);
+ map_write(map, CMD(adr & ((1<<bits_per_chip) - 1)),
+ map->pfow_base + PFOW_COMMAND_ADDRESS_L);
+ map_write(map, CMD(adr>>bits_per_chip),
+ map->pfow_base + PFOW_COMMAND_ADDRESS_H);
+ if (len) {
+ map_write(map, CMD(len & ((1<<bits_per_chip) - 1)),
+ map->pfow_base + PFOW_DATA_COUNT_L);
+ map_write(map, CMD(len>>bits_per_chip),
+ map->pfow_base + PFOW_DATA_COUNT_H);
+ }
+ if (datum)
+ map_write(map, *datum, map->pfow_base + PFOW_COMMAND_DATA);
+
+ /* Command execution start */
+ map_write(map, CMD(LPDDR_START_EXECUTION),
+ map->pfow_base + PFOW_COMMAND_EXECUTE);
+}
+
+static inline void print_drs_error(unsigned dsr)
+{
+ int prog_status = (dsr & DSR_RPS) >> 8;
+
+ if (!(dsr & DSR_AVAILABLE))
+ printk(KERN_NOTICE"DSR.15: (0) Device not Available\n");
+ if (prog_status & 0x03)
+ printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid "
+ "half with 41h command\n");
+ else if (prog_status & 0x02)
+ printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt "
+ "in region with Control Mode data\n");
+ else if (prog_status & 0x01)
+ printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region "
+ "with Object Mode data\n");
+ if (!(dsr & DSR_READY_STATUS))
+ printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n");
+ if (dsr & DSR_ESS)
+ printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n");
+ if (dsr & DSR_ERASE_STATUS)
+ printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n");
+ if (dsr & DSR_PROGRAM_STATUS)
+ printk(KERN_NOTICE"DSR.4: (1) Program Error\n");
+ if (dsr & DSR_VPPS)
+ printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation "
+ "aborted\n");
+ if (dsr & DSR_PSS)
+ printk(KERN_NOTICE"DSR.2: (1) Program suspended\n");
+ if (dsr & DSR_DPS)
+ printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt "
+ "on locked block\n");
+}
+#endif /* __LINUX_MTD_PFOW_H */
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
new file mode 100644
index 0000000..d2887e7
--- /dev/null
+++ b/include/linux/mtd/physmap.h
@@ -0,0 +1,36 @@
+/*
+ * For boards with physically mapped flash and using
+ * drivers/mtd/maps/physmap.c mapping driver.
+ *
+ * Copyright (C) 2003 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MTD_PHYSMAP__
+#define __LINUX_MTD_PHYSMAP__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct map_info;
+struct platform_device;
+
+struct physmap_flash_data {
+ unsigned int width;
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
+ void (*set_vpp)(struct platform_device *, int);
+ unsigned int nr_parts;
+ unsigned int pfow_base;
+ char *probe_type;
+ struct mtd_partition *parts;
+ const char **part_probe_types;
+};
+
+#endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/include/linux/mtd/pismo.h b/include/linux/mtd/pismo.h
new file mode 100644
index 0000000..8dfb7e1
--- /dev/null
+++ b/include/linux/mtd/pismo.h
@@ -0,0 +1,17 @@
+/*
+ * PISMO memory driver - http://www.pismoworld.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#ifndef __LINUX_MTD_PISMO_H
+#define __LINUX_MTD_PISMO_H
+
+struct pismo_pdata {
+ void (*set_vpp)(void *, int);
+ void *vpp_data;
+ phys_addr_t cs_addrs[5];
+};
+
+#endif
diff --git a/include/linux/mtd/plat-ram.h b/include/linux/mtd/plat-ram.h
new file mode 100644
index 0000000..e07890a
--- /dev/null
+++ b/include/linux/mtd/plat-ram.h
@@ -0,0 +1,34 @@
+/* linux/include/linux/mtd/plat-ram.h
+ *
+ * (c) 2004 Simtec Electronics
+ * http://www.simtec.co.uk/products/SWLINUX/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Generic platform device based RAM map
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __LINUX_MTD_PLATRAM_H
+#define __LINUX_MTD_PLATRAM_H __FILE__
+
+#define PLATRAM_RO (0)
+#define PLATRAM_RW (1)
+
+struct platdata_mtd_ram {
+ const char *mapname;
+ const char **map_probes;
+ const char **probes;
+ struct mtd_partition *partitions;
+ int nr_partitions;
+ int bankwidth;
+
+ /* control callbacks */
+
+ void (*set_rw)(struct device *dev, int to);
+};
+
+#endif /* __LINUX_MTD_PLATRAM_H */
diff --git a/include/linux/mtd/qinfo.h b/include/linux/mtd/qinfo.h
new file mode 100644
index 0000000..7b3d487
--- /dev/null
+++ b/include/linux/mtd/qinfo.h
@@ -0,0 +1,91 @@
+#ifndef __LINUX_MTD_QINFO_H
+#define __LINUX_MTD_QINFO_H
+
+#include <linux/mtd/map.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/flashchip.h>
+#include <linux/mtd/partitions.h>
+
+/* lpddr_private describes lpddr flash chip in memory map
+ * @ManufactId - Chip Manufacture ID
+ * @DevId - Chip Device ID
+ * @qinfo - pointer to qinfo records describing the chip
+ * @numchips - number of chips including virual RWW partitions
+ * @chipshift - Chip/partiton size 2^chipshift
+ * @chips - per-chip data structure
+ */
+struct lpddr_private {
+ uint16_t ManufactId;
+ uint16_t DevId;
+ struct qinfo_chip *qinfo;
+ int numchips;
+ unsigned long chipshift;
+ struct flchip chips[0];
+};
+
+/* qinfo_query_info structure contains request information for
+ * each qinfo record
+ * @major - major number of qinfo record
+ * @major - minor number of qinfo record
+ * @id_str - descriptive string to access the record
+ * @desc - detailed description for the qinfo record
+ */
+struct qinfo_query_info {
+ uint8_t major;
+ uint8_t minor;
+ char *id_str;
+ char *desc;
+};
+
+/*
+ * qinfo_chip structure contains necessary qinfo records data
+ * @DevSizeShift - Device size 2^n bytes
+ * @BufSizeShift - Program buffer size 2^n bytes
+ * @TotalBlocksNum - Total number of blocks
+ * @UniformBlockSizeShift - Uniform block size 2^UniformBlockSizeShift bytes
+ * @HWPartsNum - Number of hardware partitions
+ * @SuspEraseSupp - Suspend erase supported
+ * @SingleWordProgTime - Single word program 2^SingleWordProgTime u-sec
+ * @ProgBufferTime - Program buffer write 2^ProgBufferTime u-sec
+ * @BlockEraseTime - Block erase 2^BlockEraseTime m-sec
+ */
+struct qinfo_chip {
+ /* General device info */
+ uint16_t DevSizeShift;
+ uint16_t BufSizeShift;
+ /* Erase block information */
+ uint16_t TotalBlocksNum;
+ uint16_t UniformBlockSizeShift;
+ /* Partition information */
+ uint16_t HWPartsNum;
+ /* Optional features */
+ uint16_t SuspEraseSupp;
+ /* Operation typical time */
+ uint16_t SingleWordProgTime;
+ uint16_t ProgBufferTime;
+ uint16_t BlockEraseTime;
+};
+
+/* defines for fixup usage */
+#define LPDDR_MFR_ANY 0xffff
+#define LPDDR_ID_ANY 0xffff
+#define NUMONYX_MFGR_ID 0x0089
+#define R18_DEVICE_ID_1G 0x893c
+
+static inline map_word lpddr_build_cmd(u_long cmd, struct map_info *map)
+{
+ map_word val = { {0} };
+ val.x[0] = cmd;
+ return val;
+}
+
+#define CMD(x) lpddr_build_cmd(x, map)
+#define CMDVAL(cmd) cmd.x[0]
+
+struct mtd_info *lpddr_cmdset(struct map_info *);
+
+#endif
+
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
new file mode 100644
index 0000000..a38e1fa
--- /dev/null
+++ b/include/linux/mtd/sh_flctl.h
@@ -0,0 +1,171 @@
+/*
+ * SuperH FLCTL nand controller
+ *
+ * Copyright © 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __SH_FLCTL_H__
+#define __SH_FLCTL_H__
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/pm_qos.h>
+
+/* FLCTL registers */
+#define FLCMNCR(f) (f->reg + 0x0)
+#define FLCMDCR(f) (f->reg + 0x4)
+#define FLCMCDR(f) (f->reg + 0x8)
+#define FLADR(f) (f->reg + 0xC)
+#define FLADR2(f) (f->reg + 0x3C)
+#define FLDATAR(f) (f->reg + 0x10)
+#define FLDTCNTR(f) (f->reg + 0x14)
+#define FLINTDMACR(f) (f->reg + 0x18)
+#define FLBSYTMR(f) (f->reg + 0x1C)
+#define FLBSYCNT(f) (f->reg + 0x20)
+#define FLDTFIFO(f) (f->reg + 0x24)
+#define FLECFIFO(f) (f->reg + 0x28)
+#define FLTRCR(f) (f->reg + 0x2C)
+#define FLHOLDCR(f) (f->reg + 0x38)
+#define FL4ECCRESULT0(f) (f->reg + 0x80)
+#define FL4ECCRESULT1(f) (f->reg + 0x84)
+#define FL4ECCRESULT2(f) (f->reg + 0x88)
+#define FL4ECCRESULT3(f) (f->reg + 0x8C)
+#define FL4ECCCR(f) (f->reg + 0x90)
+#define FL4ECCCNT(f) (f->reg + 0x94)
+#define FLERRADR(f) (f->reg + 0x98)
+
+/* FLCMNCR control bits */
+#define ECCPOS2 (0x1 << 25)
+#define _4ECCCNTEN (0x1 << 24)
+#define _4ECCEN (0x1 << 23)
+#define _4ECCCORRECT (0x1 << 22)
+#define SHBUSSEL (0x1 << 20)
+#define SEL_16BIT (0x1 << 19)
+#define SNAND_E (0x1 << 18) /* SNAND (0=512 1=2048)*/
+#define QTSEL_E (0x1 << 17)
+#define ENDIAN (0x1 << 16) /* 1 = little endian */
+#define FCKSEL_E (0x1 << 15)
+#define ECCPOS_00 (0x00 << 12)
+#define ECCPOS_01 (0x01 << 12)
+#define ECCPOS_02 (0x02 << 12)
+#define ACM_SACCES_MODE (0x01 << 10)
+#define NANWF_E (0x1 << 9)
+#define SE_D (0x1 << 8) /* Spare area disable */
+#define CE1_ENABLE (0x1 << 4) /* Chip Enable 1 */
+#define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */
+#define TYPESEL_SET (0x1 << 0)
+
+/*
+ * Clock settings using the PULSEx registers from FLCMNCR
+ *
+ * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
+ * to control the clock divider used between the High-Speed Peripheral Clock
+ * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
+ * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
+ * bit version the divider is seperate for the pulse width of high and low
+ * signals.
+ */
+#define PULSE3 (0x1 << 27)
+#define PULSE2 (0x1 << 17)
+#define PULSE1 (0x1 << 15)
+#define PULSE0 (0x1 << 9)
+#define CLK_8B_0_5 PULSE1
+#define CLK_8B_1 0x0
+#define CLK_8B_1_5 (PULSE1 | PULSE2)
+#define CLK_8B_2 PULSE0
+#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2)
+#define CLK_8B_4 (PULSE0 | PULSE2)
+#define CLK_16B_6L_2H PULSE0
+#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2)
+#define CLK_16B_12L_4H (PULSE0 | PULSE2)
+
+/* FLCMDCR control bits */
+#define ADRCNT2_E (0x1 << 31) /* 5byte address enable */
+#define ADRMD_E (0x1 << 26) /* Sector address access */
+#define CDSRC_E (0x1 << 25) /* Data buffer selection */
+#define DOSR_E (0x1 << 24) /* Status read check */
+#define SELRW (0x1 << 21) /* 0:read 1:write */
+#define DOADR_E (0x1 << 20) /* Address stage execute */
+#define ADRCNT_1 (0x00 << 18) /* Address data bytes: 1byte */
+#define ADRCNT_2 (0x01 << 18) /* Address data bytes: 2byte */
+#define ADRCNT_3 (0x02 << 18) /* Address data bytes: 3byte */
+#define ADRCNT_4 (0x03 << 18) /* Address data bytes: 4byte */
+#define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */
+#define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */
+
+/* FLTRCR control bits */
+#define TRSTRT (0x1 << 0) /* translation start */
+#define TREND (0x1 << 1) /* translation end */
+
+/*
+ * FLHOLDCR control bits
+ *
+ * HOLDEN: Bus Occupancy Enable (inverted)
+ * Enable this bit when the external bus might be used in between transfers.
+ * If not set and the bus gets used by other modules, a deadlock occurs.
+ */
+#define HOLDEN (0x1 << 0)
+
+/* FL4ECCCR control bits */
+#define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */
+#define _4ECCEND (0x1 << 1) /* 4 symbols end */
+#define _4ECCEXST (0x1 << 0) /* 4 symbols exist */
+
+#define INIT_FL4ECCRESULT_VAL 0x03FF03FF
+#define LOOP_TIMEOUT_MAX 0x00010000
+
+struct sh_flctl {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct platform_device *pdev;
+ struct dev_pm_qos_request pm_qos;
+ void __iomem *reg;
+
+ uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
+ int read_bytes;
+ int index;
+ int seqin_column; /* column in SEQIN cmd */
+ int seqin_page_addr; /* page_addr in SEQIN cmd */
+ uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */
+ int erase1_page_addr; /* page_addr in ERASE1 cmd */
+ uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */
+ uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */
+ uint32_t flcmncr_base; /* base value of FLCMNCR */
+
+ int hwecc_cant_correct[4];
+
+ unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */
+ unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */
+ unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */
+ unsigned qos_request:1; /* QoS request to prevent deep power shutdown */
+};
+
+struct sh_flctl_platform_data {
+ struct mtd_partition *parts;
+ int nr_parts;
+ unsigned long flcmncr_val;
+
+ unsigned has_hwecc:1;
+ unsigned use_holden:1;
+};
+
+static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
+{
+ return container_of(mtdinfo, struct sh_flctl, mtd);
+}
+
+#endif /* __SH_FLCTL_H__ */
diff --git a/include/linux/mtd/sharpsl.h b/include/linux/mtd/sharpsl.h
new file mode 100644
index 0000000..25f4d2a
--- /dev/null
+++ b/include/linux/mtd/sharpsl.h
@@ -0,0 +1,20 @@
+/*
+ * SharpSL NAND support
+ *
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+struct sharpsl_nand_platform_data {
+ struct nand_bbt_descr *badblock_pattern;
+ struct nand_ecclayout *ecc_layout;
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
+};
diff --git a/include/linux/mtd/spear_smi.h b/include/linux/mtd/spear_smi.h
new file mode 100644
index 0000000..8ae1726
--- /dev/null
+++ b/include/linux/mtd/spear_smi.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright © 2010 ST Microelectronics
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MTD_SPEAR_SMI_H
+#define __MTD_SPEAR_SMI_H
+
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+/* max possible slots for serial-nor flash chip in the SMI controller */
+#define MAX_NUM_FLASH_CHIP 4
+
+/* macro to define partitions for flash devices */
+#define DEFINE_PARTS(n, of, s) \
+{ \
+ .name = n, \
+ .offset = of, \
+ .size = s, \
+}
+
+/**
+ * struct spear_smi_flash_info - platform structure for passing flash
+ * information
+ *
+ * name: name of the serial nor flash for identification
+ * mem_base: the memory base on which the flash is mapped
+ * size: size of the flash in bytes
+ * partitions: parition details
+ * nr_partitions: number of partitions
+ * fast_mode: whether flash supports fast mode
+ */
+
+struct spear_smi_flash_info {
+ char *name;
+ unsigned long mem_base;
+ unsigned long size;
+ struct mtd_partition *partitions;
+ int nr_partitions;
+ u8 fast_mode;
+};
+
+/**
+ * struct spear_smi_plat_data - platform structure for configuring smi
+ *
+ * clk_rate: clk rate at which SMI must operate
+ * num_flashes: number of flashes present on board
+ * board_flash_info: specific details of each flash present on board
+ */
+struct spear_smi_plat_data {
+ unsigned long clk_rate;
+ int num_flashes;
+ struct spear_smi_flash_info *board_flash_info;
+ struct device_node *np[MAX_NUM_FLASH_CHIP];
+};
+
+#endif /* __MTD_SPEAR_SMI_H */
diff --git a/include/linux/mtd/super.h b/include/linux/mtd/super.h
new file mode 100644
index 0000000..f456230
--- /dev/null
+++ b/include/linux/mtd/super.h
@@ -0,0 +1,29 @@
+/* MTD-based superblock handling
+ *
+ * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __MTD_SUPER_H__
+#define __MTD_SUPER_H__
+
+#ifdef __KERNEL__
+
+#include <linux/mtd/mtd.h>
+#include <linux/fs.h>
+#include <linux/mount.h>
+
+extern struct dentry *mount_mtd(struct file_system_type *fs_type, int flags,
+ const char *dev_name, void *data,
+ int (*fill_super)(struct super_block *, void *, int));
+extern void kill_mtd_super(struct super_block *sb);
+
+
+#endif /* __KERNEL__ */
+
+#endif /* __MTD_SUPER_H__ */
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
new file mode 100644
index 0000000..db4836b
--- /dev/null
+++ b/include/linux/mtd/ubi.h
@@ -0,0 +1,250 @@
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+#ifndef __LINUX_UBI_H__
+#define __LINUX_UBI_H__
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <mtd/ubi-user.h>
+
+/*
+ * enum ubi_open_mode - UBI volume open mode constants.
+ *
+ * UBI_READONLY: read-only mode
+ * UBI_READWRITE: read-write mode
+ * UBI_EXCLUSIVE: exclusive mode
+ */
+enum {
+ UBI_READONLY = 1,
+ UBI_READWRITE,
+ UBI_EXCLUSIVE
+};
+
+/**
+ * struct ubi_volume_info - UBI volume description data structure.
+ * @vol_id: volume ID
+ * @ubi_num: UBI device number this volume belongs to
+ * @size: how many physical eraseblocks are reserved for this volume
+ * @used_bytes: how many bytes of data this volume contains
+ * @used_ebs: how many physical eraseblocks of this volume actually contain any
+ * data
+ * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
+ * @corrupted: non-zero if the volume is corrupted (static volumes only)
+ * @upd_marker: non-zero if the volume has update marker set
+ * @alignment: volume alignment
+ * @usable_leb_size: how many bytes are available in logical eraseblocks of
+ * this volume
+ * @name_len: volume name length
+ * @name: volume name
+ * @cdev: UBI volume character device major and minor numbers
+ *
+ * The @corrupted flag is only relevant to static volumes and is always zero
+ * for dynamic ones. This is because UBI does not care about dynamic volume
+ * data protection and only cares about protecting static volume data.
+ *
+ * The @upd_marker flag is set if the volume update operation was interrupted.
+ * Before touching the volume data during the update operation, UBI first sets
+ * the update marker flag for this volume. If the volume update operation was
+ * further interrupted, the update marker indicates this. If the update marker
+ * is set, the contents of the volume is certainly damaged and a new volume
+ * update operation has to be started.
+ *
+ * To put it differently, @corrupted and @upd_marker fields have different
+ * semantics:
+ * o the @corrupted flag means that this static volume is corrupted for some
+ * reasons, but not because an interrupted volume update
+ * o the @upd_marker field means that the volume is damaged because of an
+ * interrupted update operation.
+ *
+ * I.e., the @corrupted flag is never set if the @upd_marker flag is set.
+ *
+ * The @used_bytes and @used_ebs fields are only really needed for static
+ * volumes and contain the number of bytes stored in this static volume and how
+ * many eraseblock this data occupies. In case of dynamic volumes, the
+ * @used_bytes field is equivalent to @size*@usable_leb_size, and the @used_ebs
+ * field is equivalent to @size.
+ *
+ * In general, logical eraseblock size is a property of the UBI device, not
+ * of the UBI volume. Indeed, the logical eraseblock size depends on the
+ * physical eraseblock size and on how much bytes UBI headers consume. But
+ * because of the volume alignment (@alignment), the usable size of logical
+ * eraseblocks if a volume may be less. The following equation is true:
+ * @usable_leb_size = LEB size - (LEB size mod @alignment),
+ * where LEB size is the logical eraseblock size defined by the UBI device.
+ *
+ * The alignment is multiple to the minimal flash input/output unit size or %1
+ * if all the available space is used.
+ *
+ * To put this differently, alignment may be considered is a way to change
+ * volume logical eraseblock sizes.
+ */
+struct ubi_volume_info {
+ int ubi_num;
+ int vol_id;
+ int size;
+ long long used_bytes;
+ int used_ebs;
+ int vol_type;
+ int corrupted;
+ int upd_marker;
+ int alignment;
+ int usable_leb_size;
+ int name_len;
+ const char *name;
+ dev_t cdev;
+};
+
+/**
+ * struct ubi_device_info - UBI device description data structure.
+ * @ubi_num: ubi device number
+ * @leb_size: logical eraseblock size on this UBI device
+ * @leb_start: starting offset of logical eraseblocks within physical
+ * eraseblocks
+ * @min_io_size: minimal I/O unit size
+ * @max_write_size: maximum amount of bytes the underlying flash can write at a
+ * time (MTD write buffer size)
+ * @ro_mode: if this device is in read-only mode
+ * @cdev: UBI character device major and minor numbers
+ *
+ * Note, @leb_size is the logical eraseblock size offered by the UBI device.
+ * Volumes of this UBI device may have smaller logical eraseblock size if their
+ * alignment is not equivalent to %1.
+ *
+ * The @max_write_size field describes flash write maximum write unit. For
+ * example, NOR flash allows for changing individual bytes, so @min_io_size is
+ * %1. However, it does not mean than NOR flash has to write data byte-by-byte.
+ * Instead, CFI NOR flashes have a write-buffer of, e.g., 64 bytes, and when
+ * writing large chunks of data, they write 64-bytes at a time. Obviously, this
+ * improves write throughput.
+ *
+ * Also, the MTD device may have N interleaved (striped) flash chips
+ * underneath, in which case @min_io_size can be physical min. I/O size of
+ * single flash chip, while @max_write_size can be N * @min_io_size.
+ *
+ * The @max_write_size field is always greater or equivalent to @min_io_size.
+ * E.g., some NOR flashes may have (@min_io_size = 1, @max_write_size = 64). In
+ * contrast, NAND flashes usually have @min_io_size = @max_write_size = NAND
+ * page size.
+ */
+struct ubi_device_info {
+ int ubi_num;
+ int leb_size;
+ int leb_start;
+ int min_io_size;
+ int max_write_size;
+ int ro_mode;
+ dev_t cdev;
+};
+
+/*
+ * Volume notification types.
+ * @UBI_VOLUME_ADDED: a volume has been added (an UBI device was attached or a
+ * volume was created)
+ * @UBI_VOLUME_REMOVED: a volume has been removed (an UBI device was detached
+ * or a volume was removed)
+ * @UBI_VOLUME_RESIZED: a volume has been re-sized
+ * @UBI_VOLUME_RENAMED: a volume has been re-named
+ * @UBI_VOLUME_UPDATED: data has been written to a volume
+ *
+ * These constants define which type of event has happened when a volume
+ * notification function is invoked.
+ */
+enum {
+ UBI_VOLUME_ADDED,
+ UBI_VOLUME_REMOVED,
+ UBI_VOLUME_RESIZED,
+ UBI_VOLUME_RENAMED,
+ UBI_VOLUME_UPDATED,
+};
+
+/*
+ * struct ubi_notification - UBI notification description structure.
+ * @di: UBI device description object
+ * @vi: UBI volume description object
+ *
+ * UBI notifiers are called with a pointer to an object of this type. The
+ * object describes the notification. Namely, it provides a description of the
+ * UBI device and UBI volume the notification informs about.
+ */
+struct ubi_notification {
+ struct ubi_device_info di;
+ struct ubi_volume_info vi;
+};
+
+/* UBI descriptor given to users when they open UBI volumes */
+struct ubi_volume_desc;
+
+int ubi_get_device_info(int ubi_num, struct ubi_device_info *di);
+void ubi_get_volume_info(struct ubi_volume_desc *desc,
+ struct ubi_volume_info *vi);
+struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode);
+struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
+ int mode);
+struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode);
+
+int ubi_register_volume_notifier(struct notifier_block *nb,
+ int ignore_existing);
+int ubi_unregister_volume_notifier(struct notifier_block *nb);
+
+void ubi_close_volume(struct ubi_volume_desc *desc);
+int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
+ int len, int check);
+int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
+ int offset, int len, int dtype);
+int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
+ int len, int dtype);
+int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
+int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype);
+int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
+int ubi_sync(int ubi_num);
+
+/*
+ * This function is the same as the 'ubi_leb_read()' function, but it does not
+ * provide the checking capability.
+ */
+static inline int ubi_read(struct ubi_volume_desc *desc, int lnum, char *buf,
+ int offset, int len)
+{
+ return ubi_leb_read(desc, lnum, buf, offset, len, 0);
+}
+
+/*
+ * This function is the same as the 'ubi_leb_write()' functions, but it does
+ * not have the data type argument.
+ */
+static inline int ubi_write(struct ubi_volume_desc *desc, int lnum,
+ const void *buf, int offset, int len)
+{
+ return ubi_leb_write(desc, lnum, buf, offset, len, UBI_UNKNOWN);
+}
+
+/*
+ * This function is the same as the 'ubi_leb_change()' functions, but it does
+ * not have the data type argument.
+ */
+static inline int ubi_change(struct ubi_volume_desc *desc, int lnum,
+ const void *buf, int len)
+{
+ return ubi_leb_change(desc, lnum, buf, len, UBI_UNKNOWN);
+}
+
+#endif /* !__LINUX_UBI_H__ */
diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h
new file mode 100644
index 0000000..abed4de
--- /dev/null
+++ b/include/linux/mtd/xip.h
@@ -0,0 +1,99 @@
+/*
+ * MTD primitives for XIP support
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 2, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This XIP support for MTD has been loosely inspired
+ * by an earlier patch authored by David Woodhouse.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MTD_XIP_H__
+#define __LINUX_MTD_XIP_H__
+
+
+#ifdef CONFIG_MTD_XIP
+
+/*
+ * We really don't want gcc to guess anything.
+ * We absolutely _need_ proper inlining.
+ */
+#include <linux/compiler.h>
+
+/*
+ * Function that are modifying the flash state away from array mode must
+ * obviously not be running from flash. The __xipram is therefore marking
+ * those functions so they get relocated to ram.
+ */
+#define __xipram noinline __attribute__ ((__section__ (".data")))
+
+/*
+ * Each architecture has to provide the following macros. They must access
+ * the hardware directly and not rely on any other (XIP) functions since they
+ * won't be available when used (flash not in array mode).
+ *
+ * xip_irqpending()
+ *
+ * return non zero when any hardware interrupt is pending.
+ *
+ * xip_currtime()
+ *
+ * return a platform specific time reference to be used with
+ * xip_elapsed_since().
+ *
+ * xip_elapsed_since(x)
+ *
+ * return in usecs the elapsed timebetween now and the reference x as
+ * returned by xip_currtime().
+ *
+ * note 1: conversion to usec can be approximated, as long as the
+ * returned value is <= the real elapsed time.
+ * note 2: this should be able to cope with a few seconds without
+ * overflowing.
+ *
+ * xip_iprefetch()
+ *
+ * Macro to fill instruction prefetch
+ * e.g. a series of nops: asm volatile (".rep 8; nop; .endr");
+ */
+
+#include <asm/mtd-xip.h>
+
+#ifndef xip_irqpending
+
+#warning "missing IRQ and timer primitives for XIP MTD support"
+#warning "some of the XIP MTD support code will be disabled"
+#warning "your system will therefore be unresponsive when writing or erasing flash"
+
+#define xip_irqpending() (0)
+#define xip_currtime() (0)
+#define xip_elapsed_since(x) (0)
+
+#endif
+
+#ifndef xip_iprefetch
+#define xip_iprefetch() do { } while (0)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period. This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * This should not rely upon standard kernel code.
+ */
+#ifndef xip_cpu_idle
+#define xip_cpu_idle() do { } while (0)
+#endif
+
+#else
+
+#define __xipram
+
+#endif /* CONFIG_MTD_XIP */
+
+#endif /* __LINUX_MTD_XIP_H__ */