Initial commit from HTC m7ul-3.4.10-jb-crc-ddcfb8c
diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild
new file mode 100644
index 0000000..b607f35
--- /dev/null
+++ b/include/linux/usb/Kbuild
@@ -0,0 +1,10 @@
+header-y += audio.h
+header-y += cdc.h
+header-y += ch9.h
+header-y += ch11.h
+header-y += functionfs.h
+header-y += gadgetfs.h
+header-y += midi.h
+header-y += g_printer.h
+header-y += tmc.h
+header-y += video.h
diff --git a/include/linux/usb/android_composite.h b/include/linux/usb/android_composite.h
new file mode 100644
index 0000000..b8c0a06
--- /dev/null
+++ b/include/linux/usb/android_composite.h
@@ -0,0 +1,112 @@
+/*
+ * Platform data for Android USB
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __LINUX_USB_ANDROID_H
+#define __LINUX_USB_ANDROID_H
+
+#include <linux/usb/composite.h>
+#include <linux/if_ether.h>
+
+#if 0
+struct android_usb_function {
+ struct list_head list;
+ char *name;
+ int (*bind_config)(struct usb_configuration *c);
+};
+#endif
+struct android_usb_product {
+ __u16 vendor_id;
+
+
+ __u16 product_id;
+
+ int num_functions;
+ char **functions;
+};
+
+struct android_usb_platform_data {
+
+ __u16 vendor_id;
+
+
+ __u16 product_id;
+
+ __u16 version;
+
+ char *product_name;
+ char *manufacturer_name;
+ char *serial_number;
+
+ int num_products;
+ struct android_usb_product *products;
+
+ int num_functions;
+ char **functions;
+
+ void (*enable_fast_charge)(bool enable);
+ bool RndisDisableMPDecision;
+
+ int usb_id_pin_gpio;
+
+ int (*update_pid_and_serial_num)(uint32_t, const char *);
+
+ char *fserial_init_string;
+
+ char *usb_rmnet_interface;
+ char *usb_diag_interface;
+
+ unsigned char diag_init:1;
+ unsigned char modem_init:1;
+ unsigned char rmnet_init:1;
+ unsigned char reserved:5;
+
+
+
+
+ int nluns;
+ int cdrom_lun;
+ int cdrom_cttype;
+ u32 swfi_latency;
+ int (*match)(int product_id, int intrsharing);
+ u8 usb_core_id;
+ int adb_perf_lock_on;
+ int mtp_perf_lock_on;
+};
+
+struct usb_mass_storage_platform_data {
+
+ char *vendor;
+ char *product;
+ int release;
+
+ char can_stall;
+
+ int nluns;
+};
+
+struct usb_ether_platform_data {
+ u8 ethaddr[ETH_ALEN];
+ u32 vendorID;
+ const char *vendorDescr;
+};
+int htc_usb_enable_function(char *name, int ebl);
+#if 0
+extern void android_register_function(struct android_usb_function *f);
+
+extern int android_enable_function(struct usb_function *f, int enable);
+#endif
+
+#endif
diff --git a/include/linux/usb/association.h b/include/linux/usb/association.h
new file mode 100644
index 0000000..0a4a18b
--- /dev/null
+++ b/include/linux/usb/association.h
@@ -0,0 +1,150 @@
+/*
+ * Wireless USB - Cable Based Association
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_USB_ASSOCIATION_H
+#define __LINUX_USB_ASSOCIATION_H
+
+
+/*
+ * Association attributes
+ *
+ * Association Models Supplement to WUSB 1.0 T[3-1]
+ *
+ * Each field in the structures has it's ID, it's length and then the
+ * value. This is the actual definition of the field's ID and its
+ * length.
+ */
+struct wusb_am_attr {
+ __u8 id;
+ __u8 len;
+};
+
+/* Different fields defined by the spec */
+#define WUSB_AR_AssociationTypeId { .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) }
+#define WUSB_AR_AssociationSubTypeId { .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) }
+#define WUSB_AR_Length { .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) }
+#define WUSB_AR_AssociationStatus { .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) }
+#define WUSB_AR_LangID { .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) }
+#define WUSB_AR_DeviceFriendlyName { .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_HostFriendlyName { .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_CHID { .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) }
+#define WUSB_AR_CDID { .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) }
+#define WUSB_AR_ConnectionContext { .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) }
+#define WUSB_AR_BandGroups { .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) }
+
+/* CBAF Control Requests (AMS1.0[T4-1] */
+enum {
+ CBAF_REQ_GET_ASSOCIATION_INFORMATION = 0x01,
+ CBAF_REQ_GET_ASSOCIATION_REQUEST,
+ CBAF_REQ_SET_ASSOCIATION_RESPONSE
+};
+
+/*
+ * CBAF USB-interface defitions
+ *
+ * No altsettings, one optional interrupt endpoint.
+ */
+enum {
+ CBAF_IFACECLASS = 0xef,
+ CBAF_IFACESUBCLASS = 0x03,
+ CBAF_IFACEPROTOCOL = 0x01,
+};
+
+/* Association Information (AMS1.0[T4-3]) */
+struct wusb_cbaf_assoc_info {
+ __le16 Length;
+ __u8 NumAssociationRequests;
+ __le16 Flags;
+ __u8 AssociationRequestsArray[];
+} __attribute__((packed));
+
+/* Association Request (AMS1.0[T4-4]) */
+struct wusb_cbaf_assoc_request {
+ __u8 AssociationDataIndex;
+ __u8 Reserved;
+ __le16 AssociationTypeId;
+ __le16 AssociationSubTypeId;
+ __le32 AssociationTypeInfoSize;
+} __attribute__((packed));
+
+enum {
+ AR_TYPE_WUSB = 0x0001,
+ AR_TYPE_WUSB_RETRIEVE_HOST_INFO = 0x0000,
+ AR_TYPE_WUSB_ASSOCIATE = 0x0001,
+};
+
+/* Association Attribute header (AMS1.0[3.8]) */
+struct wusb_cbaf_attr_hdr {
+ __le16 id;
+ __le16 len;
+} __attribute__((packed));
+
+/* Host Info (AMS1.0[T4-7]) (yeah, more headers and fields...) */
+struct wusb_cbaf_host_info {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr CHID_hdr;
+ struct wusb_ckhdid CHID;
+ struct wusb_cbaf_attr_hdr LangID_hdr;
+ __le16 LangID;
+ struct wusb_cbaf_attr_hdr HostFriendlyName_hdr;
+ __u8 HostFriendlyName[];
+} __attribute__((packed));
+
+/* Device Info (AMS1.0[T4-8])
+ *
+ * I still don't get this tag'n'header stuff for each goddamn
+ * field...
+ */
+struct wusb_cbaf_device_info {
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le32 Length;
+ struct wusb_cbaf_attr_hdr CDID_hdr;
+ struct wusb_ckhdid CDID;
+ struct wusb_cbaf_attr_hdr BandGroups_hdr;
+ __le16 BandGroups;
+ struct wusb_cbaf_attr_hdr LangID_hdr;
+ __le16 LangID;
+ struct wusb_cbaf_attr_hdr DeviceFriendlyName_hdr;
+ __u8 DeviceFriendlyName[];
+} __attribute__((packed));
+
+/* Connection Context; CC_DATA - Success case (AMS1.0[T4-9]) */
+struct wusb_cbaf_cc_data {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le32 Length;
+ struct wusb_cbaf_attr_hdr ConnectionContext_hdr;
+ struct wusb_ckhdid CHID;
+ struct wusb_ckhdid CDID;
+ struct wusb_ckhdid CK;
+ struct wusb_cbaf_attr_hdr BandGroups_hdr;
+ __le16 BandGroups;
+} __attribute__((packed));
+
+/* CC_DATA - Failure case (AMS1.0[T4-10]) */
+struct wusb_cbaf_cc_data_fail {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le16 Length;
+ struct wusb_cbaf_attr_hdr AssociationStatus_hdr;
+ __u32 AssociationStatus;
+} __attribute__((packed));
+
+#endif /* __LINUX_USB_ASSOCIATION_H */
diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h
new file mode 100644
index 0000000..ba99af2
--- /dev/null
+++ b/include/linux/usb/atmel_usba_udc.h
@@ -0,0 +1,23 @@
+/*
+ * Platform data definitions for Atmel USBA gadget driver.
+ */
+#ifndef __LINUX_USB_USBA_H
+#define __LINUX_USB_USBA_H
+
+struct usba_ep_data {
+ char *name;
+ int index;
+ int fifo_size;
+ int nr_banks;
+ int can_dma;
+ int can_isoc;
+};
+
+struct usba_platform_data {
+ int vbus_pin;
+ int vbus_pin_inverted;
+ int num_ep;
+ struct usba_ep_data ep[0];
+};
+
+#endif /* __LINUX_USB_USBA_H */
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
new file mode 100644
index 0000000..762438f
--- /dev/null
+++ b/include/linux/usb/audio-v2.h
@@ -0,0 +1,396 @@
+/*
+ * Copyright (c) 2010 Daniel Mack <daniel@caiaq.de>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for Audio Devices in version 2.0.
+ * Comments below reference relevant sections of the documents contained
+ * in http://www.usb.org/developers/devclass_docs/Audio2.0_final.zip
+ */
+
+#ifndef __LINUX_USB_AUDIO_V2_H
+#define __LINUX_USB_AUDIO_V2_H
+
+#include <linux/types.h>
+
+
+
+static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x1;
+}
+
+static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x2;
+}
+
+struct uac2_ac_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __le16 bcdADC;
+ __u8 bCategory;
+ __le16 wTotalLength;
+ __u8 bmControls;
+} __packed;
+
+struct uac2_format_type_i_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u8 bSubslotSize;
+ __u8 bBitResolution;
+} __packed;
+
+
+struct uac_clock_source_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bmAttributes;
+ __u8 bmControls;
+ __u8 bAssocTerminal;
+ __u8 iClockSource;
+} __attribute__((packed));
+
+#define UAC_CLOCK_SOURCE_TYPE_EXT 0x0
+#define UAC_CLOCK_SOURCE_TYPE_INT_FIXED 0x1
+#define UAC_CLOCK_SOURCE_TYPE_INT_VAR 0x2
+#define UAC_CLOCK_SOURCE_TYPE_INT_PROG 0x3
+#define UAC_CLOCK_SOURCE_SYNCED_TO_SOF (1 << 2)
+
+
+struct uac_clock_selector_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bNrInPins;
+ __u8 baCSourceID[];
+
+} __attribute__((packed));
+
+
+struct uac_clock_multiplier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bCSourceID;
+ __u8 bmControls;
+ __u8 iClockMultiplier;
+} __attribute__((packed));
+
+
+struct uac2_input_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 bCSourceID;
+ __u8 bNrChannels;
+ __u32 bmChannelConfig;
+ __u8 iChannelNames;
+ __u16 bmControls;
+ __u8 iTerminal;
+} __attribute__((packed));
+
+
+struct uac2_output_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 bSourceID;
+ __u8 bCSourceID;
+ __u16 bmControls;
+ __u8 iTerminal;
+} __attribute__((packed));
+
+
+
+
+struct uac2_feature_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u8 bSourceID;
+ __u8 bmaControls[0];
+} __attribute__((packed));
+
+
+struct uac2_as_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalLink;
+ __u8 bmControls;
+ __u8 bFormatType;
+ __u32 bmFormats;
+ __u8 bNrChannels;
+ __u32 bmChannelConfig;
+ __u8 iChannelNames;
+} __attribute__((packed));
+
+
+struct uac2_iso_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bmAttributes;
+ __u8 bmControls;
+ __u8 bLockDelayUnits;
+ __le16 wLockDelay;
+} __attribute__((packed));
+
+#define UAC2_CONTROL_PITCH (3 << 0)
+#define UAC2_CONTROL_DATA_OVERRUN (3 << 2)
+#define UAC2_CONTROL_DATA_UNDERRUN (3 << 4)
+
+
+#define UAC2_INTERRUPT_DATA_MSG_VENDOR (1 << 0)
+#define UAC2_INTERRUPT_DATA_MSG_EP (1 << 1)
+
+struct uac2_interrupt_data_msg {
+ __u8 bInfo;
+ __u8 bAttribute;
+ __le16 wValue;
+ __le16 wIndex;
+} __attribute__((packed));
+
+#define UAC2_FUNCTION_SUBCLASS_UNDEFINED 0x00
+#define UAC2_FUNCTION_DESKTOP_SPEAKER 0x01
+#define UAC2_FUNCTION_HOME_THEATER 0x02
+#define UAC2_FUNCTION_MICROPHONE 0x03
+#define UAC2_FUNCTION_HEADSET 0x04
+#define UAC2_FUNCTION_TELEPHONE 0x05
+#define UAC2_FUNCTION_CONVERTER 0x06
+#define UAC2_FUNCTION_SOUND_RECORDER 0x07
+#define UAC2_FUNCTION_IO_BOX 0x08
+#define UAC2_FUNCTION_MUSICAL_INSTRUMENT 0x09
+#define UAC2_FUNCTION_PRO_AUDIO 0x0a
+#define UAC2_FUNCTION_AUDIO_VIDEO 0x0b
+#define UAC2_FUNCTION_CONTROL_PANEL 0x0c
+#define UAC2_FUNCTION_OTHER 0xff
+
+#define UAC2_EFFECT_UNIT 0x07
+#define UAC2_PROCESSING_UNIT_V2 0x08
+#define UAC2_EXTENSION_UNIT_V2 0x09
+#define UAC2_CLOCK_SOURCE 0x0a
+#define UAC2_CLOCK_SELECTOR 0x0b
+#define UAC2_CLOCK_MULTIPLIER 0x0c
+#define UAC2_SAMPLE_RATE_CONVERTER 0x0d
+
+#define UAC2_ENCODER 0x03
+#define UAC2_DECODER 0x04
+
+#define UAC2_EFFECT_UNDEFINED 0x00
+#define UAC2_EFFECT_PARAM_EQ 0x01
+#define UAC2_EFFECT_REVERB 0x02
+#define UAC2_EFFECT_MOD_DELAY 0x03
+#define UAC2_EFFECT_DYN_RANGE_COMP 0x04
+
+#define UAC2_PROCESS_UNDEFINED 0x00
+#define UAC2_PROCESS_UP_DOWNMIX 0x01
+#define UAC2_PROCESS_DOLBY_PROLOCIC 0x02
+#define UAC2_PROCESS_STEREO_EXTENDER 0x03
+
+#define UAC2_CS_CUR 0x01
+#define UAC2_CS_RANGE 0x02
+#define UAC2_CS_MEM 0x03
+
+#define UAC2_ENCODER_UNDEFINED 0x00
+#define UAC2_ENCODER_OTHER 0x01
+#define UAC2_ENCODER_MPEG 0x02
+#define UAC2_ENCODER_AC3 0x03
+#define UAC2_ENCODER_WMA 0x04
+#define UAC2_ENCODER_DTS 0x05
+
+#define UAC2_DECODER_UNDEFINED 0x00
+#define UAC2_DECODER_OTHER 0x01
+#define UAC2_DECODER_MPEG 0x02
+#define UAC2_DECODER_AC3 0x03
+#define UAC2_DECODER_WMA 0x04
+#define UAC2_DECODER_DTS 0x05
+
+#define UAC2_CS_UNDEFINED 0x00
+#define UAC2_CS_CONTROL_SAM_FREQ 0x01
+#define UAC2_CS_CONTROL_CLOCK_VALID 0x02
+
+#define UAC2_CX_UNDEFINED 0x00
+#define UAC2_CX_CLOCK_SELECTOR 0x01
+
+#define UAC2_CM_UNDEFINED 0x00
+#define UAC2_CM_NUMERATOR 0x01
+#define UAC2_CM_DENOMINTATOR 0x02
+
+#define UAC2_TE_UNDEFINED 0x00
+#define UAC2_TE_COPY_PROTECT 0x01
+#define UAC2_TE_CONNECTOR 0x02
+#define UAC2_TE_OVERLOAD 0x03
+#define UAC2_TE_CLUSTER 0x04
+#define UAC2_TE_UNDERFLOW 0x05
+#define UAC2_TE_OVERFLOW 0x06
+#define UAC2_TE_LATENCY 0x07
+
+#define UAC2_MU_UNDEFINED 0x00
+#define UAC2_MU_MIXER 0x01
+#define UAC2_MU_CLUSTER 0x02
+#define UAC2_MU_UNDERFLOW 0x03
+#define UAC2_MU_OVERFLOW 0x04
+#define UAC2_MU_LATENCY 0x05
+
+#define UAC2_SU_UNDEFINED 0x00
+#define UAC2_SU_SELECTOR 0x01
+#define UAC2_SU_LATENCY 0x02
+
+#define UAC2_FU_INPUT_GAIN 0x0b
+#define UAC2_FU_INPUT_GAIN_PAD 0x0c
+#define UAC2_FU_PHASE_INVERTER 0x0d
+#define UAC2_FU_UNDERFLOW 0x0e
+#define UAC2_FU_OVERFLOW 0x0f
+#define UAC2_FU_LATENCY 0x10
+
+#define UAC2_PE_UNDEFINED 0x00
+#define UAC2_PE_ENABLE 0x01
+#define UAC2_PE_CENTERFREQ 0x02
+#define UAC2_PE_QFACTOR 0x03
+#define UAC2_PE_GAIN 0x04
+#define UAC2_PE_UNDERFLOW 0x05
+#define UAC2_PE_OVERFLOW 0x06
+#define UAC2_PE_LATENCY 0x07
+
+#define UAC2_RV_UNDEFINED 0x00
+#define UAC2_RV_ENABLE 0x01
+#define UAC2_RV_TYPE 0x02
+#define UAC2_RV_LEVEL 0x03
+#define UAC2_RV_TIME 0x04
+#define UAC2_RV_FEEDBACK 0x05
+#define UAC2_RV_PREDELAY 0x06
+#define UAC2_RV_DENSITY 0x07
+#define UAC2_RV_HIFREQ_ROLLOFF 0x08
+#define UAC2_RV_UNDERFLOW 0x09
+#define UAC2_RV_OVERFLOW 0x0a
+#define UAC2_RV_LATENCY 0x0b
+
+#define UAC2_MD_UNDEFINED 0x00
+#define UAC2_MD_ENABLE 0x01
+#define UAC2_MD_BALANCE 0x02
+#define UAC2_MD_RATE 0x03
+#define UAC2_MD_DEPTH 0x04
+#define UAC2_MD_TIME 0x05
+#define UAC2_MD_FEEDBACK 0x06
+#define UAC2_MD_UNDERFLOW 0x07
+#define UAC2_MD_OVERFLOW 0x08
+#define UAC2_MD_LATENCY 0x09
+
+#define UAC2_DR_UNDEFINED 0x00
+#define UAC2_DR_ENABLE 0x01
+#define UAC2_DR_COMPRESSION_RATE 0x02
+#define UAC2_DR_MAXAMPL 0x03
+#define UAC2_DR_THRESHOLD 0x04
+#define UAC2_DR_ATTACK_TIME 0x05
+#define UAC2_DR_RELEASE_TIME 0x06
+#define UAC2_DR_UNDEFLOW 0x07
+#define UAC2_DR_OVERFLOW 0x08
+#define UAC2_DR_LATENCY 0x09
+
+#define UAC2_UD_UNDEFINED 0x00
+#define UAC2_UD_ENABLE 0x01
+#define UAC2_UD_MODE_SELECT 0x02
+#define UAC2_UD_CLUSTER 0x03
+#define UAC2_UD_UNDERFLOW 0x04
+#define UAC2_UD_OVERFLOW 0x05
+#define UAC2_UD_LATENCY 0x06
+
+#define UAC2_DP_UNDEFINED 0x00
+#define UAC2_DP_ENABLE 0x01
+#define UAC2_DP_MODE_SELECT 0x02
+#define UAC2_DP_CLUSTER 0x03
+#define UAC2_DP_UNDERFFLOW 0x04
+#define UAC2_DP_OVERFLOW 0x05
+#define UAC2_DP_LATENCY 0x06
+
+#define UAC2_ST_EXT_UNDEFINED 0x00
+#define UAC2_ST_EXT_ENABLE 0x01
+#define UAC2_ST_EXT_WIDTH 0x02
+#define UAC2_ST_EXT_UNDEFLOW 0x03
+#define UAC2_ST_EXT_OVERFLOW 0x04
+#define UAC2_ST_EXT_LATENCY 0x05
+
+#define UAC2_XU_UNDEFINED 0x00
+#define UAC2_XU_ENABLE 0x01
+#define UAC2_XU_CLUSTER 0x02
+#define UAC2_XU_UNDERFLOW 0x03
+#define UAC2_XU_OVERFLOW 0x04
+#define UAC2_XU_LATENCY 0x05
+
+#define UAC2_AS_UNDEFINED 0x00
+#define UAC2_AS_ACT_ALT_SETTING 0x01
+#define UAC2_AS_VAL_ALT_SETTINGS 0x02
+#define UAC2_AS_AUDIO_DATA_FORMAT 0x03
+
+#define UAC2_EN_UNDEFINED 0x00
+#define UAC2_EN_BIT_RATE 0x01
+#define UAC2_EN_QUALITY 0x02
+#define UAC2_EN_VBR 0x03
+#define UAC2_EN_TYPE 0x04
+#define UAC2_EN_UNDERFLOW 0x05
+#define UAC2_EN_OVERFLOW 0x06
+#define UAC2_EN_ENCODER_ERROR 0x07
+#define UAC2_EN_PARAM1 0x08
+#define UAC2_EN_PARAM2 0x09
+#define UAC2_EN_PARAM3 0x0a
+#define UAC2_EN_PARAM4 0x0b
+#define UAC2_EN_PARAM5 0x0c
+#define UAC2_EN_PARAM6 0x0d
+#define UAC2_EN_PARAM7 0x0e
+#define UAC2_EN_PARAM8 0x0f
+
+#define UAC2_MPEG_UNDEFINED 0x00
+#define UAC2_MPEG_DUAL_CHANNEL 0x01
+#define UAC2_MPEG_SECOND_STEREO 0x02
+#define UAC2_MPEG_MULTILINGUAL 0x03
+#define UAC2_MPEG_DYN_RANGE 0x04
+#define UAC2_MPEG_SCALING 0x05
+#define UAC2_MPEG_HILO_SCALING 0x06
+#define UAC2_MPEG_UNDERFLOW 0x07
+#define UAC2_MPEG_OVERFLOW 0x08
+#define UAC2_MPEG_DECODER_ERROR 0x09
+
+#define UAC2_AC3_UNDEFINED 0x00
+#define UAC2_AC3_MODE 0x01
+#define UAC2_AC3_DYN_RANGE 0x02
+#define UAC2_AC3_SCALING 0x03
+#define UAC2_AC3_HILO_SCALING 0x04
+#define UAC2_AC3_UNDERFLOW 0x05
+#define UAC2_AC3_OVERFLOW 0x06
+#define UAC2_AC3_DECODER_ERROR 0x07
+
+#define UAC2_WMA_UNDEFINED 0x00
+#define UAC2_WMA_UNDERFLOW 0x01
+#define UAC2_WMA_OVERFLOW 0x02
+#define UAC2_WMA_DECODER_ERROR 0x03
+
+#define UAC2_DTS_UNDEFINED 0x00
+#define UAC2_DTS_UNDERFLOW 0x01
+#define UAC2_DTS_OVERFLOW 0x02
+#define UAC2_DTS_DECODER_ERROR 0x03
+
+#define UAC2_EP_CS_UNDEFINED 0x00
+#define UAC2_EP_CS_PITCH 0x01
+#define UAC2_EP_CS_DATA_OVERRUN 0x02
+#define UAC2_EP_CS_DATA_UNDERRUN 0x03
+
+#endif
+
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
new file mode 100644
index 0000000..dfefa94
--- /dev/null
+++ b/include/linux/usb/audio.h
@@ -0,0 +1,526 @@
+/*
+ * <linux/usb/audio.h> -- USB Audio definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for Audio Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/audio10.pdf
+ *
+ * Types and defines in this file are either specific to version 1.0 of
+ * this standard or common for newer versions.
+ */
+
+#ifndef __LINUX_USB_AUDIO_H
+#define __LINUX_USB_AUDIO_H
+
+#include <linux/types.h>
+
+#define UAC_VERSION_1 0x00
+#define UAC_VERSION_2 0x20
+
+#define USB_SUBCLASS_AUDIOCONTROL 0x01
+#define USB_SUBCLASS_AUDIOSTREAMING 0x02
+#define USB_SUBCLASS_MIDISTREAMING 0x03
+
+#define UAC_HEADER 0x01
+#define UAC_INPUT_TERMINAL 0x02
+#define UAC_OUTPUT_TERMINAL 0x03
+#define UAC_MIXER_UNIT 0x04
+#define UAC_SELECTOR_UNIT 0x05
+#define UAC_FEATURE_UNIT 0x06
+#define UAC1_PROCESSING_UNIT 0x07
+#define UAC1_EXTENSION_UNIT 0x08
+
+#define UAC_AS_GENERAL 0x01
+#define UAC_FORMAT_TYPE 0x02
+#define UAC_FORMAT_SPECIFIC 0x03
+
+#define UAC_PROCESS_UNDEFINED 0x00
+#define UAC_PROCESS_UP_DOWNMIX 0x01
+#define UAC_PROCESS_DOLBY_PROLOGIC 0x02
+#define UAC_PROCESS_STEREO_EXTENDER 0x03
+#define UAC_PROCESS_REVERB 0x04
+#define UAC_PROCESS_CHORUS 0x05
+#define UAC_PROCESS_DYN_RANGE_COMP 0x06
+
+#define UAC_EP_GENERAL 0x01
+
+#define UAC_SET_ 0x00
+#define UAC_GET_ 0x80
+
+#define UAC__CUR 0x1
+#define UAC__MIN 0x2
+#define UAC__MAX 0x3
+#define UAC__RES 0x4
+#define UAC__MEM 0x5
+
+#define UAC_SET_CUR (UAC_SET_ | UAC__CUR)
+#define UAC_GET_CUR (UAC_GET_ | UAC__CUR)
+#define UAC_SET_MIN (UAC_SET_ | UAC__MIN)
+#define UAC_GET_MIN (UAC_GET_ | UAC__MIN)
+#define UAC_SET_MAX (UAC_SET_ | UAC__MAX)
+#define UAC_GET_MAX (UAC_GET_ | UAC__MAX)
+#define UAC_SET_RES (UAC_SET_ | UAC__RES)
+#define UAC_GET_RES (UAC_GET_ | UAC__RES)
+#define UAC_SET_MEM (UAC_SET_ | UAC__MEM)
+#define UAC_GET_MEM (UAC_GET_ | UAC__MEM)
+
+#define UAC_GET_STAT 0xff
+
+
+#define UAC_TERM_COPY_PROTECT 0x01
+
+#define UAC_FU_MUTE 0x01
+#define UAC_FU_VOLUME 0x02
+#define UAC_FU_BASS 0x03
+#define UAC_FU_MID 0x04
+#define UAC_FU_TREBLE 0x05
+#define UAC_FU_GRAPHIC_EQUALIZER 0x06
+#define UAC_FU_AUTOMATIC_GAIN 0x07
+#define UAC_FU_DELAY 0x08
+#define UAC_FU_BASS_BOOST 0x09
+#define UAC_FU_LOUDNESS 0x0a
+
+#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1))
+
+#define UAC_UD_ENABLE 0x01
+#define UAC_UD_MODE_SELECT 0x02
+
+#define UAC_DP_ENABLE 0x01
+#define UAC_DP_MODE_SELECT 0x02
+
+#define UAC_3D_ENABLE 0x01
+#define UAC_3D_SPACE 0x02
+
+#define UAC_REVERB_ENABLE 0x01
+#define UAC_REVERB_LEVEL 0x02
+#define UAC_REVERB_TIME 0x03
+#define UAC_REVERB_FEEDBACK 0x04
+
+#define UAC_CHORUS_ENABLE 0x01
+#define UAC_CHORUS_LEVEL 0x02
+#define UAC_CHORUS_RATE 0x03
+#define UAC_CHORUS_DEPTH 0x04
+
+#define UAC_DCR_ENABLE 0x01
+#define UAC_DCR_RATE 0x02
+#define UAC_DCR_MAXAMPL 0x03
+#define UAC_DCR_THRESHOLD 0x04
+#define UAC_DCR_ATTACK_TIME 0x05
+#define UAC_DCR_RELEASE_TIME 0x06
+
+#define UAC_XU_ENABLE 0x01
+
+#define UAC_MS_HEADER 0x01
+#define UAC_MIDI_IN_JACK 0x02
+#define UAC_MIDI_OUT_JACK 0x03
+
+#define UAC_MS_GENERAL 0x01
+
+#define UAC_TERMINAL_UNDEFINED 0x100
+#define UAC_TERMINAL_STREAMING 0x101
+#define UAC_TERMINAL_VENDOR_SPEC 0x1FF
+
+struct uac1_ac_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __le16 bcdADC;
+ __le16 wTotalLength;
+ __u8 bInCollection;
+ __u8 baInterfaceNr[];
+} __attribute__ ((packed));
+
+#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n))
+
+#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \
+struct uac1_ac_header_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __le16 bcdADC; \
+ __le16 wTotalLength; \
+ __u8 bInCollection; \
+ __u8 baInterfaceNr[n]; \
+} __attribute__ ((packed))
+
+struct uac_input_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalID;
+ __le16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 bNrChannels;
+ __le16 wChannelConfig;
+ __u8 iChannelNames;
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define UAC_DT_INPUT_TERMINAL_SIZE 12
+
+#define UAC_INPUT_TERMINAL_UNDEFINED 0x200
+#define UAC_INPUT_TERMINAL_MICROPHONE 0x201
+#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202
+#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203
+#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204
+#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205
+#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206
+
+
+#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01
+
+struct uac1_output_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalID;
+ __le16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 bSourceID;
+ __u8 iTerminal;
+} __attribute__ ((packed));
+
+#define UAC_DT_OUTPUT_TERMINAL_SIZE 9
+
+#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300
+#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301
+#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302
+#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303
+#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304
+#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305
+#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306
+#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307
+
+#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2)
+
+#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \
+struct uac_feature_unit_descriptor_##ch { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bUnitID; \
+ __u8 bSourceID; \
+ __u8 bControlSize; \
+ __le16 bmaControls[ch + 1]; \
+ __u8 iFeature; \
+} __attribute__ ((packed))
+
+struct uac_mixer_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u8 bNrInPins;
+ __u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc)
+{
+ return desc->baSourceID[desc->bNrInPins];
+}
+
+static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc,
+ int protocol)
+{
+ if (protocol == UAC_VERSION_1)
+ return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ desc->baSourceID[desc->bNrInPins + 1];
+ else
+ return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
+ (desc->baSourceID[desc->bNrInPins + 3] << 16) |
+ (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ (desc->baSourceID[desc->bNrInPins + 1]);
+}
+
+static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ desc->baSourceID[desc->bNrInPins + 3] :
+ desc->baSourceID[desc->bNrInPins + 5];
+}
+
+static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ &desc->baSourceID[desc->bNrInPins + 4] :
+ &desc->baSourceID[desc->bNrInPins + 6];
+}
+
+static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc)
+{
+ __u8 *raw = (__u8 *) desc;
+ return raw[desc->bLength - 1];
+}
+
+struct uac_selector_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUintID;
+ __u8 bNrInPins;
+ __u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc)
+{
+ __u8 *raw = (__u8 *) desc;
+ return raw[desc->bLength - 1];
+}
+
+struct uac_feature_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u8 bSourceID;
+ __u8 bControlSize;
+ __u8 bmaControls[0];
+} __attribute__((packed));
+
+static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc)
+{
+ __u8 *raw = (__u8 *) desc;
+ return raw[desc->bLength - 1];
+}
+
+struct uac_processing_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u16 wProcessType;
+ __u8 bNrInPins;
+ __u8 baSourceID[];
+} __attribute__ ((packed));
+
+static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc)
+{
+ return desc->baSourceID[desc->bNrInPins];
+}
+
+static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ if (protocol == UAC_VERSION_1)
+ return (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ desc->baSourceID[desc->bNrInPins + 1];
+ else
+ return (desc->baSourceID[desc->bNrInPins + 4] << 24) |
+ (desc->baSourceID[desc->bNrInPins + 3] << 16) |
+ (desc->baSourceID[desc->bNrInPins + 2] << 8) |
+ (desc->baSourceID[desc->bNrInPins + 1]);
+}
+
+static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ desc->baSourceID[desc->bNrInPins + 3] :
+ desc->baSourceID[desc->bNrInPins + 5];
+}
+
+static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ desc->baSourceID[desc->bNrInPins + 4] :
+ desc->baSourceID[desc->bNrInPins + 6];
+}
+
+static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ return (protocol == UAC_VERSION_1) ?
+ &desc->baSourceID[desc->bNrInPins + 5] :
+ &desc->baSourceID[desc->bNrInPins + 7];
+}
+
+static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
+ return desc->baSourceID[desc->bNrInPins + control_size];
+}
+
+static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc,
+ int protocol)
+{
+ __u8 control_size = uac_processing_unit_bControlSize(desc, protocol);
+ return &desc->baSourceID[desc->bNrInPins + control_size + 1];
+}
+
+struct uac1_as_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalLink;
+ __u8 bDelay;
+ __le16 wFormatTag;
+} __attribute__ ((packed));
+
+#define UAC_DT_AS_HEADER_SIZE 7
+
+#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0
+#define UAC_FORMAT_TYPE_I_PCM 0x1
+#define UAC_FORMAT_TYPE_I_PCM8 0x2
+#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3
+#define UAC_FORMAT_TYPE_I_ALAW 0x4
+#define UAC_FORMAT_TYPE_I_MULAW 0x5
+
+struct uac_format_type_i_continuous_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u8 bNrChannels;
+ __u8 bSubframeSize;
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tLowerSamFreq[3];
+ __u8 tUpperSamFreq[3];
+} __attribute__ ((packed));
+
+#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14
+
+struct uac_format_type_i_discrete_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u8 bNrChannels;
+ __u8 bSubframeSize;
+ __u8 bBitResolution;
+ __u8 bSamFreqType;
+ __u8 tSamFreq[][3];
+} __attribute__ ((packed));
+
+#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \
+struct uac_format_type_i_discrete_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bFormatType; \
+ __u8 bNrChannels; \
+ __u8 bSubframeSize; \
+ __u8 bBitResolution; \
+ __u8 bSamFreqType; \
+ __u8 tSamFreq[n][3]; \
+} __attribute__ ((packed))
+
+#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3))
+
+struct uac_format_type_i_ext_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u8 bSubslotSize;
+ __u8 bBitResolution;
+ __u8 bHeaderLength;
+ __u8 bControlSize;
+ __u8 bSideBandProtocol;
+} __attribute__((packed));
+
+
+#define UAC_FORMAT_TYPE_II_MPEG 0x1001
+#define UAC_FORMAT_TYPE_II_AC3 0x1002
+
+struct uac_format_type_ii_discrete_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __le16 wMaxBitRate;
+ __le16 wSamplesPerFrame;
+ __u8 bSamFreqType;
+ __u8 tSamFreq[][3];
+} __attribute__((packed));
+
+struct uac_format_type_ii_ext_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bFormatType;
+ __u16 wMaxBitRate;
+ __u16 wSamplesPerFrame;
+ __u8 bHeaderLength;
+ __u8 bSideBandProtocol;
+} __attribute__((packed));
+
+#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005
+#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006
+
+#define UAC_FORMAT_TYPE_UNDEFINED 0x0
+#define UAC_FORMAT_TYPE_I 0x1
+#define UAC_FORMAT_TYPE_II 0x2
+#define UAC_FORMAT_TYPE_III 0x3
+#define UAC_EXT_FORMAT_TYPE_I 0x81
+#define UAC_EXT_FORMAT_TYPE_II 0x82
+#define UAC_EXT_FORMAT_TYPE_III 0x83
+
+struct uac_iso_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bmAttributes;
+ __u8 bLockDelayUnits;
+ __le16 wLockDelay;
+} __attribute__((packed));
+#define UAC_ISO_ENDPOINT_DESC_SIZE 7
+
+#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01
+#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02
+#define UAC_EP_CS_ATTR_FILL_MAX 0x80
+
+
+#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1
+#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2
+
+#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7)
+#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6)
+
+struct uac1_status_word {
+ __u8 bStatusType;
+ __u8 bOriginator;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+
+struct usb_audio_control {
+ struct list_head list;
+ const char *name;
+ u8 type;
+ int data[5];
+ int (*set)(struct usb_audio_control *con, u8 cmd, int value);
+ int (*get)(struct usb_audio_control *con, u8 cmd);
+};
+
+struct usb_audio_control_selector {
+ struct list_head list;
+ struct list_head control;
+ u8 id;
+ const char *name;
+ u8 type;
+ struct usb_descriptor_header *desc;
+};
+
+#endif
+
+#endif
diff --git a/include/linux/usb/c67x00.h b/include/linux/usb/c67x00.h
new file mode 100644
index 0000000..83c6b45
--- /dev/null
+++ b/include/linux/usb/c67x00.h
@@ -0,0 +1,48 @@
+/*
+ * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#ifndef _LINUX_USB_C67X00_H
+#define _LINUX_USB_C67X00_H
+
+/* SIE configuration */
+#define C67X00_SIE_UNUSED 0
+#define C67X00_SIE_HOST 1
+#define C67X00_SIE_PERIPHERAL_A 2 /* peripheral on A port */
+#define C67X00_SIE_PERIPHERAL_B 3 /* peripheral on B port */
+
+#define c67x00_sie_config(config, n) (((config)>>(4*(n)))&0x3)
+
+#define C67X00_SIE1_UNUSED (C67X00_SIE_UNUSED << 0)
+#define C67X00_SIE1_HOST (C67X00_SIE_HOST << 0)
+#define C67X00_SIE1_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 0)
+#define C67X00_SIE1_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 0)
+
+#define C67X00_SIE2_UNUSED (C67X00_SIE_UNUSED << 4)
+#define C67X00_SIE2_HOST (C67X00_SIE_HOST << 4)
+#define C67X00_SIE2_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 4)
+#define C67X00_SIE2_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 4)
+
+struct c67x00_platform_data {
+ int sie_config; /* SIEs config (C67X00_SIEx_*) */
+ unsigned long hpi_regstep; /* Step between HPI registers */
+};
+
+#endif /* _LINUX_USB_C67X00_H */
diff --git a/include/linux/usb/ccid_desc.h b/include/linux/usb/ccid_desc.h
new file mode 100644
index 0000000..7f46dd7
--- /dev/null
+++ b/include/linux/usb/ccid_desc.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details
+ */
+
+#ifndef __LINUX_USB_CCID_DESC_H
+#define __LINUX_USB_CCID_DESC_H
+
+#define CCID1_10 0x0110
+
+#define SMART_CARD_DEVICE_CLASS 0x0B
+#define CCID_DECRIPTOR_TYPE 0x21
+
+#define CCIDGENERICREQ_ABORT 0x01
+#define CCIDGENERICREQ_GET_CLOCK_FREQUENCIES 0x02
+#define CCIDGENERICREQ_GET_DATA_RATES 0x03
+
+#define PC_TO_RDR_ICCPOWERON 0x62
+#define PC_TO_RDR_ICCPOWEROFF 0x63
+#define PC_TO_RDR_GETSLOTSTATUS 0x65
+#define PC_TO_RDR_XFRBLOCK 0x6F
+#define PC_TO_RDR_GETPARAMETERS 0x6C
+#define PC_TO_RDR_RESETPARAMETERS 0x6D
+#define PC_TO_RDR_SETPARAMETERS 0x61
+#define PC_TO_RDR_ESCAPE 0x6B
+#define PC_TO_RDR_ICCCLOCK 0x6E
+#define PC_TO_RDR_T0APDU 0x6A
+#define PC_TO_RDR_SECURE 0x69
+#define PC_TO_RDR_MECHANICAL 0x71
+#define PC_TO_RDR_ABORT 0x72
+#define PC_TO_RDR_SETDATARATEANDCLOCKFREQUENCY 0x73
+
+#define RDR_TO_PC_DATABLOCK 0x80
+#define RDR_TO_PC_SLOTSTATUS 0x81
+#define RDR_TO_PC_PARAMETERS 0x82
+#define RDR_TO_PC_ESCAPE 0x83
+#define RDR_TO_PC_DATARATEANDCLOCKFREQUENCY 0x84
+
+#define RDR_TO_PC_NOTIFYSLOTCHANGE 0x50
+#define RDR_TO_PC_HARDWAREERROR 0x51
+
+#define CMD_ABORTED 0xFF
+#define ICC_MUTE 0xFE
+#define XFR_PARITY_ERROR 0xFD
+#define XFR_OVERRUN 0xFC
+#define HW_ERROR 0xFB
+#define BAD_ATR_TS 0xF8
+#define BAD_ATR_TCK 0xF7
+#define ICC_PROTOCOL_NOT_SUPPORTED 0xF6
+#define ICC_CLASS_NOT_SUPPORTED 0xF5
+#define PROCEDURE_BYTE_CONFLICT 0xF4
+#define DEACTIVATED_PROTOCOL 0xF3
+#define BUSY_WITH_AUTO_SEQUENCE 0xF2
+#define PIN_TIMEOUT 0xF0
+#define PIN_CANCELLED 0xEF
+#define CMD_SLOT_BUSY 0xE0
+
+#define VOLTS_AUTO 0x00
+#define VOLTS_5_0 0x01
+#define VOLTS_3_0 0x02
+#define VOLTS_1_8 0x03
+
+#define ICC_NOT_PRESENT 0x00
+#define ICC_PRESENT 0x01
+#define ICC_CHANGE 0x02
+#define ICC_INSERTED_EVENT (ICC_PRESENT+ICC_CHANGE)
+
+struct usb_ccid_class_descriptor {
+ unsigned char bLength;
+ unsigned char bDescriptorType;
+ unsigned short bcdCCID;
+ unsigned char bMaxSlotIndex;
+ unsigned char bVoltageSupport;
+ unsigned long dwProtocols;
+ unsigned long dwDefaultClock;
+ unsigned long dwMaximumClock;
+ unsigned char bNumClockSupported;
+ unsigned long dwDataRate;
+ unsigned long dwMaxDataRate;
+ unsigned char bNumDataRatesSupported;
+ unsigned long dwMaxIFSD;
+ unsigned long dwSynchProtocols;
+ unsigned long dwMechanical;
+ unsigned long dwFeatures;
+ unsigned long dwMaxCCIDMessageLength;
+ unsigned char bClassGetResponse;
+ unsigned char bClassEnvelope;
+ unsigned short wLcdLayout;
+ unsigned char bPINSupport;
+ unsigned char bMaxCCIDBusySlots;
+} __packed;
+#endif
diff --git a/include/linux/usb/cdc-wdm.h b/include/linux/usb/cdc-wdm.h
new file mode 100644
index 0000000..719c332
--- /dev/null
+++ b/include/linux/usb/cdc-wdm.h
@@ -0,0 +1,19 @@
+/*
+ * USB CDC Device Management subdriver
+ *
+ * Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_USB_CDC_WDM_H
+#define __LINUX_USB_CDC_WDM_H
+
+extern struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
+ struct usb_endpoint_descriptor *ep,
+ int bufsize,
+ int (*manage_power)(struct usb_interface *, int));
+
+#endif /* __LINUX_USB_CDC_WDM_H */
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
new file mode 100644
index 0000000..36fd11a
--- /dev/null
+++ b/include/linux/usb/cdc.h
@@ -0,0 +1,357 @@
+
+#ifndef __LINUX_USB_CDC_H
+#define __LINUX_USB_CDC_H
+
+#include <linux/types.h>
+
+#define USB_CDC_SUBCLASS_ACM 0x02
+#define USB_CDC_SUBCLASS_ETHERNET 0x06
+#define USB_CDC_SUBCLASS_WHCM 0x08
+#define USB_CDC_SUBCLASS_DMM 0x09
+#define USB_CDC_SUBCLASS_MDLM 0x0a
+#define USB_CDC_SUBCLASS_OBEX 0x0b
+#define USB_CDC_SUBCLASS_EEM 0x0c
+#define USB_CDC_SUBCLASS_NCM 0x0d
+
+#define USB_CDC_PROTO_NONE 0
+
+#define USB_CDC_ACM_PROTO_AT_V25TER 1
+#define USB_CDC_ACM_PROTO_AT_PCCA101 2
+#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3
+#define USB_CDC_ACM_PROTO_AT_GSM 4
+#define USB_CDC_ACM_PROTO_AT_3G 5
+#define USB_CDC_ACM_PROTO_AT_CDMA 6
+#define USB_CDC_ACM_PROTO_VENDOR 0xff
+
+#define USB_CDC_PROTO_EEM 7
+
+#define USB_CDC_NCM_PROTO_NTB 1
+
+
+
+#define USB_CDC_HEADER_TYPE 0x00
+#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01
+#define USB_CDC_ACM_TYPE 0x02
+#define USB_CDC_UNION_TYPE 0x06
+#define USB_CDC_COUNTRY_TYPE 0x07
+#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a
+#define USB_CDC_ETHERNET_TYPE 0x0f
+#define USB_CDC_WHCM_TYPE 0x11
+#define USB_CDC_MDLM_TYPE 0x12
+#define USB_CDC_MDLM_DETAIL_TYPE 0x13
+#define USB_CDC_DMM_TYPE 0x14
+#define USB_CDC_OBEX_TYPE 0x15
+#define USB_CDC_NCM_TYPE 0x1a
+#define USB_CDC_MBB_TYPE 0x1b
+
+struct usb_cdc_header_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdCDC;
+} __attribute__ ((packed));
+
+struct usb_cdc_call_mgmt_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 bmCapabilities;
+#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01
+#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02
+
+ __u8 bDataInterface;
+} __attribute__ ((packed));
+
+struct usb_cdc_acm_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 bmCapabilities;
+} __attribute__ ((packed));
+
+
+#define USB_CDC_COMM_FEATURE 0x01
+#define USB_CDC_CAP_LINE 0x02
+#define USB_CDC_CAP_BRK 0x04
+#define USB_CDC_CAP_NOTIFY 0x08
+
+struct usb_cdc_union_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 bMasterInterface0;
+ __u8 bSlaveInterface0;
+
+} __attribute__ ((packed));
+
+struct usb_cdc_country_functional_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 iCountryCodeRelDate;
+ __le16 wCountyCode0;
+
+} __attribute__ ((packed));
+
+struct usb_cdc_network_terminal_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 bEntityId;
+ __u8 iName;
+ __u8 bChannelIndex;
+ __u8 bPhysicalInterface;
+} __attribute__ ((packed));
+
+struct usb_cdc_ether_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __u8 iMACAddress;
+ __le32 bmEthernetStatistics;
+ __le16 wMaxSegmentSize;
+ __le16 wNumberMCFilters;
+ __u8 bNumberPowerFilters;
+} __attribute__ ((packed));
+
+struct usb_cdc_dmm_desc {
+ __u8 bFunctionLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u16 bcdVersion;
+ __le16 wMaxCommand;
+} __attribute__ ((packed));
+
+struct usb_cdc_mdlm_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdVersion;
+ __u8 bGUID[16];
+} __attribute__ ((packed));
+
+struct usb_cdc_mdlm_detail_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+
+ __u8 bGuidDescriptorType;
+ __u8 bDetailData[0];
+} __attribute__ ((packed));
+
+struct usb_cdc_obex_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdVersion;
+} __attribute__ ((packed));
+
+struct usb_cdc_ncm_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdNcmVersion;
+ __u8 bmNetworkCapabilities;
+} __attribute__ ((packed));
+
+struct usb_cdc_mbb_desc {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+
+ __le16 bcdMbbVersion;
+ __le16 wMaxControlMessage;
+ __u8 bNumberFilters;
+ __u8 bMaxFilterSize;
+ __le16 wMaxSegmentSize;
+ __u8 bmNetworkCapabilities;
+} __packed;
+
+
+
+#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00
+#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01
+#define USB_CDC_RESET_FUNCTION 0x05
+#define USB_CDC_REQ_SET_LINE_CODING 0x20
+#define USB_CDC_REQ_GET_LINE_CODING 0x21
+#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22
+#define USB_CDC_REQ_SEND_BREAK 0x23
+#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40
+#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41
+#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42
+#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43
+#define USB_CDC_GET_ETHERNET_STATISTIC 0x44
+#define USB_CDC_GET_NTB_PARAMETERS 0x80
+#define USB_CDC_GET_NET_ADDRESS 0x81
+#define USB_CDC_SET_NET_ADDRESS 0x82
+#define USB_CDC_GET_NTB_FORMAT 0x83
+#define USB_CDC_SET_NTB_FORMAT 0x84
+#define USB_CDC_GET_NTB_INPUT_SIZE 0x85
+#define USB_CDC_SET_NTB_INPUT_SIZE 0x86
+#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87
+#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88
+#define USB_CDC_GET_CRC_MODE 0x89
+#define USB_CDC_SET_CRC_MODE 0x8a
+
+struct usb_cdc_line_coding {
+ __le32 dwDTERate;
+ __u8 bCharFormat;
+#define USB_CDC_1_STOP_BITS 0
+#define USB_CDC_1_5_STOP_BITS 1
+#define USB_CDC_2_STOP_BITS 2
+
+ __u8 bParityType;
+#define USB_CDC_NO_PARITY 0
+#define USB_CDC_ODD_PARITY 1
+#define USB_CDC_EVEN_PARITY 2
+#define USB_CDC_MARK_PARITY 3
+#define USB_CDC_SPACE_PARITY 4
+
+ __u8 bDataBits;
+} __attribute__ ((packed));
+
+#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0)
+#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1)
+#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2)
+#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3)
+#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4)
+
+
+
+
+#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00
+#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01
+#define USB_CDC_NOTIFY_SERIAL_STATE 0x20
+#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a
+
+struct usb_cdc_notification {
+ __u8 bmRequestType;
+ __u8 bNotificationType;
+ __le16 wValue;
+ __le16 wIndex;
+ __le16 wLength;
+} __attribute__ ((packed));
+
+struct usb_cdc_speed_change {
+ __le32 DLBitRRate;
+ __le32 ULBitRate;
+} __attribute__ ((packed));
+
+
+
+struct usb_cdc_ncm_ntb_parameters {
+ __le16 wLength;
+ __le16 bmNtbFormatsSupported;
+ __le32 dwNtbInMaxSize;
+ __le16 wNdpInDivisor;
+ __le16 wNdpInPayloadRemainder;
+ __le16 wNdpInAlignment;
+ __le16 wPadding1;
+ __le32 dwNtbOutMaxSize;
+ __le16 wNdpOutDivisor;
+ __le16 wNdpOutPayloadRemainder;
+ __le16 wNdpOutAlignment;
+ __le16 wNtbOutMaxDatagrams;
+} __attribute__ ((packed));
+
+
+#define USB_CDC_NCM_NTH16_SIGN 0x484D434E
+#define USB_CDC_NCM_NTH32_SIGN 0x686D636E
+
+struct usb_cdc_ncm_nth16 {
+ __le32 dwSignature;
+ __le16 wHeaderLength;
+ __le16 wSequence;
+ __le16 wBlockLength;
+ __le16 wNdpIndex;
+} __attribute__ ((packed));
+
+struct usb_cdc_ncm_nth32 {
+ __le32 dwSignature;
+ __le16 wHeaderLength;
+ __le16 wSequence;
+ __le32 dwBlockLength;
+ __le32 dwNdpIndex;
+} __attribute__ ((packed));
+
+
+#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E
+#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E
+#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E
+#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E
+
+struct usb_cdc_ncm_dpe16 {
+ __le16 wDatagramIndex;
+ __le16 wDatagramLength;
+} __attribute__((__packed__));
+
+struct usb_cdc_ncm_ndp16 {
+ __le32 dwSignature;
+ __le16 wLength;
+ __le16 wNextNdpIndex;
+ struct usb_cdc_ncm_dpe16 dpe16[0];
+} __attribute__ ((packed));
+
+struct usb_cdc_ncm_dpe32 {
+ __le32 dwDatagramIndex;
+ __le32 dwDatagramLength;
+} __attribute__((__packed__));
+
+struct usb_cdc_ncm_ndp32 {
+ __le32 dwSignature;
+ __le16 wLength;
+ __le16 wReserved6;
+ __le32 dwNextNdpIndex;
+ __le32 dwReserved12;
+ struct usb_cdc_ncm_dpe32 dpe32[0];
+} __attribute__ ((packed));
+
+#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C
+#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010
+
+#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30
+#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31
+
+#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00
+#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE
+
+#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0)
+#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1)
+#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2)
+#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3)
+#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4)
+#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5)
+
+#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0)
+#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1)
+
+#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04
+#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C
+
+#define USB_CDC_NCM_NTB16_FORMAT 0x00
+#define USB_CDC_NCM_NTB32_FORMAT 0x01
+
+#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048
+#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048
+
+struct usb_cdc_ncm_ndp_input_size {
+ __le32 dwNtbInMaxSize;
+ __le16 wNtbInMaxDatagrams;
+ __le16 wReserved;
+} __attribute__ ((packed));
+
+#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00
+#define USB_CDC_NCM_CRC_APPENDED 0x01
+
+#endif
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
new file mode 100644
index 0000000..bb5c1ae
--- /dev/null
+++ b/include/linux/usb/ch11.h
@@ -0,0 +1,184 @@
+
+#ifndef __LINUX_CH11_H
+#define __LINUX_CH11_H
+
+#include <linux/types.h>
+
+
+#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE)
+#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER)
+
+#define HUB_CLEAR_TT_BUFFER 8
+#define HUB_RESET_TT 9
+#define HUB_GET_TT_STATE 10
+#define HUB_STOP_TT 11
+
+#define HUB_SET_DEPTH 12
+#define HUB_GET_PORT_ERR_COUNT 13
+
+#define C_HUB_LOCAL_POWER 0
+#define C_HUB_OVER_CURRENT 1
+
+#define USB_PORT_FEAT_CONNECTION 0
+#define USB_PORT_FEAT_ENABLE 1
+#define USB_PORT_FEAT_SUSPEND 2
+#define USB_PORT_FEAT_OVER_CURRENT 3
+#define USB_PORT_FEAT_RESET 4
+#define USB_PORT_FEAT_L1 5
+#define USB_PORT_FEAT_POWER 8
+#define USB_PORT_FEAT_LOWSPEED 9
+#define USB_PORT_FEAT_C_CONNECTION 16
+#define USB_PORT_FEAT_C_ENABLE 17
+#define USB_PORT_FEAT_C_SUSPEND 18
+#define USB_PORT_FEAT_C_OVER_CURRENT 19
+#define USB_PORT_FEAT_C_RESET 20
+#define USB_PORT_FEAT_TEST 21
+#define USB_PORT_FEAT_INDICATOR 22
+#define USB_PORT_FEAT_C_PORT_L1 23
+
+#define USB_PORT_FEAT_LINK_STATE 5
+#define USB_PORT_FEAT_U1_TIMEOUT 23
+#define USB_PORT_FEAT_U2_TIMEOUT 24
+#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
+#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
+#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
+#define USB_PORT_FEAT_BH_PORT_RESET 28
+#define USB_PORT_FEAT_C_BH_PORT_RESET 29
+#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
+
+#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8)
+#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9)
+#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10)
+
+struct usb_port_status {
+ __le16 wPortStatus;
+ __le16 wPortChange;
+} __attribute__ ((packed));
+
+#define USB_PORT_STAT_CONNECTION 0x0001
+#define USB_PORT_STAT_ENABLE 0x0002
+#define USB_PORT_STAT_SUSPEND 0x0004
+#define USB_PORT_STAT_OVERCURRENT 0x0008
+#define USB_PORT_STAT_RESET 0x0010
+#define USB_PORT_STAT_L1 0x0020
+#define USB_PORT_STAT_POWER 0x0100
+#define USB_PORT_STAT_LOW_SPEED 0x0200
+#define USB_PORT_STAT_HIGH_SPEED 0x0400
+#define USB_PORT_STAT_TEST 0x0800
+#define USB_PORT_STAT_INDICATOR 0x1000
+
+#define USB_PORT_STAT_LINK_STATE 0x01e0
+#define USB_SS_PORT_STAT_POWER 0x0200
+#define USB_SS_PORT_STAT_SPEED 0x1c00
+#define USB_PORT_STAT_SPEED_5GBPS 0x0000
+#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \
+ USB_PORT_STAT_ENABLE | \
+ USB_PORT_STAT_OVERCURRENT | \
+ USB_PORT_STAT_RESET)
+
+#define USB_SS_PORT_LS_U0 0x0000
+#define USB_SS_PORT_LS_U1 0x0020
+#define USB_SS_PORT_LS_U2 0x0040
+#define USB_SS_PORT_LS_U3 0x0060
+#define USB_SS_PORT_LS_SS_DISABLED 0x0080
+#define USB_SS_PORT_LS_RX_DETECT 0x00a0
+#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0
+#define USB_SS_PORT_LS_POLLING 0x00e0
+#define USB_SS_PORT_LS_RECOVERY 0x0100
+#define USB_SS_PORT_LS_HOT_RESET 0x0120
+#define USB_SS_PORT_LS_COMP_MOD 0x0140
+#define USB_SS_PORT_LS_LOOPBACK 0x0160
+
+#define USB_PORT_STAT_C_CONNECTION 0x0001
+#define USB_PORT_STAT_C_ENABLE 0x0002
+#define USB_PORT_STAT_C_SUSPEND 0x0004
+#define USB_PORT_STAT_C_OVERCURRENT 0x0008
+#define USB_PORT_STAT_C_RESET 0x0010
+#define USB_PORT_STAT_C_L1 0x0020
+#define USB_PORT_STAT_C_BH_RESET 0x0020
+#define USB_PORT_STAT_C_LINK_STATE 0x0040
+#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080
+
+#define HUB_CHAR_LPSM 0x0003
+#define HUB_CHAR_COMMON_LPSM 0x0000
+#define HUB_CHAR_INDV_PORT_LPSM 0x0001
+#define HUB_CHAR_NO_LPSM 0x0002
+
+#define HUB_CHAR_COMPOUND 0x0004
+
+#define HUB_CHAR_OCPM 0x0018
+#define HUB_CHAR_COMMON_OCPM 0x0000
+#define HUB_CHAR_INDV_PORT_OCPM 0x0008
+#define HUB_CHAR_NO_OCPM 0x0010
+
+#define HUB_CHAR_TTTT 0x0060
+#define HUB_CHAR_PORTIND 0x0080
+
+struct usb_hub_status {
+ __le16 wHubStatus;
+ __le16 wHubChange;
+} __attribute__ ((packed));
+
+#define HUB_STATUS_LOCAL_POWER 0x0001
+#define HUB_STATUS_OVERCURRENT 0x0002
+#define HUB_CHANGE_LOCAL_POWER 0x0001
+#define HUB_CHANGE_OVERCURRENT 0x0002
+
+
+
+#define USB_DT_HUB (USB_TYPE_CLASS | 0x09)
+#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a)
+#define USB_DT_HUB_NONVAR_SIZE 7
+#define USB_DT_SS_HUB_SIZE 12
+
+
+#define USB_HUB_PR_FS 0
+#define USB_HUB_PR_HS_NO_TT 0
+#define USB_HUB_PR_HS_SINGLE_TT 1
+#define USB_HUB_PR_HS_MULTI_TT 2
+#define USB_HUB_PR_SS 3
+
+struct usb_hub_descriptor {
+ __u8 bDescLength;
+ __u8 bDescriptorType;
+ __u8 bNbrPorts;
+ __le16 wHubCharacteristics;
+ __u8 bPwrOn2PwrGood;
+ __u8 bHubContrCurrent;
+
+
+ union {
+ struct {
+
+ __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
+ __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
+ } __attribute__ ((packed)) hs;
+
+ struct {
+ __u8 bHubHdrDecLat;
+ __u16 wHubDelay;
+ __u16 DeviceRemovable;
+ } __attribute__ ((packed)) ss;
+ } u;
+} __attribute__ ((packed));
+
+#define HUB_LED_AUTO 0
+#define HUB_LED_AMBER 1
+#define HUB_LED_GREEN 2
+#define HUB_LED_OFF 3
+
+enum hub_led_mode {
+ INDICATOR_AUTO = 0,
+ INDICATOR_CYCLE,
+
+ INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
+ INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
+ INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
+} __attribute__ ((packed));
+
+#define HUB_TTTT_8_BITS 0x00
+#define HUB_TTTT_16_BITS 0x20
+#define HUB_TTTT_24_BITS 0x40
+#define HUB_TTTT_32_BITS 0x60
+
+#endif
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
new file mode 100644
index 0000000..17bdfea
--- /dev/null
+++ b/include/linux/usb/ch9.h
@@ -0,0 +1,648 @@
+
+#ifndef __LINUX_USB_CH9_H
+#define __LINUX_USB_CH9_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+
+
+#define USB_DIR_OUT 0
+#define USB_DIR_IN 0x80
+
+#define USB_TYPE_MASK (0x03 << 5)
+#define USB_TYPE_STANDARD (0x00 << 5)
+#define USB_TYPE_CLASS (0x01 << 5)
+#define USB_TYPE_VENDOR (0x02 << 5)
+#define USB_TYPE_RESERVED (0x03 << 5)
+
+#define USB_RECIP_MASK 0x1f
+#define USB_RECIP_DEVICE 0x00
+#define USB_RECIP_INTERFACE 0x01
+#define USB_RECIP_ENDPOINT 0x02
+#define USB_RECIP_OTHER 0x03
+#define USB_RECIP_PORT 0x04
+#define USB_RECIP_RPIPE 0x05
+
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+
+#define USB_REQ_SET_ENCRYPTION 0x0D
+#define USB_REQ_GET_ENCRYPTION 0x0E
+#define USB_REQ_RPIPE_ABORT 0x0E
+#define USB_REQ_SET_HANDSHAKE 0x0F
+#define USB_REQ_RPIPE_RESET 0x0F
+#define USB_REQ_GET_HANDSHAKE 0x10
+#define USB_REQ_SET_CONNECTION 0x11
+#define USB_REQ_SET_SECURITY_DATA 0x12
+#define USB_REQ_GET_SECURITY_DATA 0x13
+#define USB_REQ_SET_WUSB_DATA 0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
+#define USB_REQ_LOOPBACK_DATA_READ 0x16
+#define USB_REQ_SET_INTERFACE_DS 0x17
+
+#define USB_REQ_HTC_FUNCTION 0x01
+
+#define USB_WVAL_ADB 0x01
+
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
+ * are at most sixteen features of each type.) Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
+ */
+#define USB_DEVICE_SELF_POWERED 0
+#define USB_DEVICE_REMOTE_WAKEUP 1
+#define USB_DEVICE_TEST_MODE 2
+#define USB_DEVICE_BATTERY 2
+#define USB_DEVICE_B_HNP_ENABLE 3
+#define USB_DEVICE_WUSB_DEVICE 3
+#define USB_DEVICE_A_HNP_SUPPORT 4
+#define USB_DEVICE_A_ALT_HNP_SUPPORT 5
+#define USB_DEVICE_DEBUG_MODE 6
+
+#define TEST_J 1
+#define TEST_K 2
+#define TEST_SE0_NAK 3
+#define TEST_PACKET 4
+#define TEST_FORCE_EN 5
+
+#define TEST_OTG_SRP_REQD 6
+#define TEST_OTG_HNP_REQD 7
+
+#define USB_DEVICE_U1_ENABLE 48
+#define USB_DEVICE_U2_ENABLE 49
+#define USB_DEVICE_LTM_ENABLE 50
+#define USB_INTRF_FUNC_SUSPEND 0
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
+#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
+
+#define USB_ENDPOINT_HALT 0
+
+#define OTG_STATUS_SELECTOR 0xF000
+#define HOST_REQUEST_FLAG 0
+#define THOST_REQ_POLL 1500
+#define OTG_TTST_SUSP 70
+
+#define OTG_TTST_VBUS_OFF 1
+
+#define USB_DEV_STAT_U1_ENABLED 2
+#define USB_DEV_STAT_U2_ENABLED 3
+#define USB_DEV_STAT_LTM_ENABLED 4
+
+struct usb_ctrlrequest {
+ __u8 bRequestType;
+ __u8 bRequest;
+ __le16 wValue;
+ __le16 wIndex;
+ __le16 wLength;
+} __attribute__ ((packed));
+
+
+
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+#define USB_DT_DEVICE_QUALIFIER 0x06
+#define USB_DT_OTHER_SPEED_CONFIG 0x07
+#define USB_DT_INTERFACE_POWER 0x08
+#define USB_DT_OTG 0x09
+#define USB_DT_DEBUG 0x0a
+#define USB_DT_INTERFACE_ASSOCIATION 0x0b
+#define USB_DT_SECURITY 0x0c
+#define USB_DT_KEY 0x0d
+#define USB_DT_ENCRYPTION_TYPE 0x0e
+#define USB_DT_BOS 0x0f
+#define USB_DT_DEVICE_CAPABILITY 0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
+#define USB_DT_WIRE_ADAPTER 0x21
+#define USB_DT_RPIPE 0x22
+#define USB_DT_CS_RADIO_CONTROL 0x23
+#define USB_DT_PIPE_USAGE 0x24
+#define USB_DT_SS_ENDPOINT_COMP 0x30
+
+#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE)
+#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG)
+#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING)
+#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE)
+#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT)
+
+struct usb_descriptor_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+} __attribute__ ((packed));
+
+
+
+struct usb_device_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __le16 idVendor;
+ __le16 idProduct;
+ __le16 bcdDevice;
+ __u8 iManufacturer;
+ __u8 iProduct;
+ __u8 iSerialNumber;
+ __u8 bNumConfigurations;
+} __attribute__ ((packed));
+
+#define USB_DT_DEVICE_SIZE 18
+
+
+#define USB_CLASS_PER_INTERFACE 0
+#define USB_CLASS_AUDIO 1
+#define USB_CLASS_COMM 2
+#define USB_CLASS_HID 3
+#define USB_CLASS_PHYSICAL 5
+#define USB_CLASS_STILL_IMAGE 6
+#define USB_CLASS_PRINTER 7
+#define USB_CLASS_MASS_STORAGE 8
+#define USB_CLASS_HUB 9
+#define USB_CLASS_CDC_DATA 0x0a
+#define USB_CLASS_CSCID 0x0b
+#define USB_CLASS_CONTENT_SEC 0x0d
+#define USB_CLASS_VIDEO 0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
+#define USB_CLASS_MISC 0xef
+#define USB_CLASS_APP_SPEC 0xfe
+#define USB_CLASS_VENDOR_SPEC 0xff
+
+#define USB_SUBCLASS_VENDOR_SPEC 0xff
+
+
+struct usb_config_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumInterfaces;
+ __u8 bConfigurationValue;
+ __u8 iConfiguration;
+ __u8 bmAttributes;
+ __u8 bMaxPower;
+} __attribute__ ((packed));
+
+#define USB_DT_CONFIG_SIZE 9
+
+#define USB_CONFIG_ATT_ONE (1 << 7)
+#define USB_CONFIG_ATT_SELFPOWER (1 << 6)
+#define USB_CONFIG_ATT_WAKEUP (1 << 5)
+#define USB_CONFIG_ATT_BATTERY (1 << 4)
+
+
+struct usb_string_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wData[1];
+} __attribute__ ((packed));
+
+
+
+struct usb_interface_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bInterfaceNumber;
+ __u8 bAlternateSetting;
+ __u8 bNumEndpoints;
+ __u8 bInterfaceClass;
+ __u8 bInterfaceSubClass;
+ __u8 bInterfaceProtocol;
+ __u8 iInterface;
+} __attribute__ ((packed));
+
+#define USB_DT_INTERFACE_SIZE 9
+
+
+struct usb_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEndpointAddress;
+ __u8 bmAttributes;
+ __le16 wMaxPacketSize;
+ __u8 bInterval;
+
+
+
+ __u8 bRefresh;
+ __u8 bSynchAddress;
+} __attribute__ ((packed));
+
+#define USB_DT_ENDPOINT_SIZE 7
+#define USB_DT_ENDPOINT_AUDIO_SIZE 9
+
+
+#define USB_ENDPOINT_NUMBER_MASK 0x0f
+#define USB_ENDPOINT_DIR_MASK 0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK 0x03
+#define USB_ENDPOINT_XFER_CONTROL 0
+#define USB_ENDPOINT_XFER_ISOC 1
+#define USB_ENDPOINT_XFER_BULK 2
+#define USB_ENDPOINT_XFER_INT 3
+#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+
+#define USB_ENDPOINT_SYNCTYPE 0x0c
+#define USB_ENDPOINT_SYNC_NONE (0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20
+
+
+static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+}
+
+static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+}
+
+static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
+}
+
+static inline int usb_endpoint_dir_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
+}
+
+static inline int usb_endpoint_xfer_bulk(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_BULK);
+}
+
+static inline int usb_endpoint_xfer_control(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_CONTROL);
+}
+
+static inline int usb_endpoint_xfer_int(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_INT);
+}
+
+static inline int usb_endpoint_xfer_isoc(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC);
+}
+
+static inline int usb_endpoint_is_bulk_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
+}
+
+static inline int usb_endpoint_is_bulk_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
+}
+
+static inline int usb_endpoint_is_int_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
+}
+
+static inline int usb_endpoint_is_int_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
+}
+
+static inline int usb_endpoint_is_isoc_in(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
+}
+
+static inline int usb_endpoint_is_isoc_out(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
+}
+
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+ return __le16_to_cpu(epd->wMaxPacketSize);
+}
+
+
+struct usb_ss_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bmAttributes;
+ __le16 wBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SS_EP_COMP_SIZE 6
+
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+ int max_streams;
+
+ if (!comp)
+ return 0;
+
+ max_streams = comp->bmAttributes & 0x1f;
+
+ if (!max_streams)
+ return 0;
+
+ max_streams = 1 << max_streams;
+
+ return max_streams;
+}
+
+#define USB_SS_MULT(p) (1 + ((p) & 0x3))
+
+
+struct usb_qualifier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __u8 bNumConfigurations;
+ __u8 bRESERVED;
+} __attribute__ ((packed));
+
+
+
+struct usb_otg_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bmAttributes;
+ __le16 bcdOTG;
+} __attribute__ ((packed));
+
+#define USB_DT_OTG_SIZE 5
+#define USB_OTG_SRP (1 << 0)
+#define USB_OTG_HNP (1 << 1)
+
+
+struct usb_debug_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+
+ __u8 bDebugInEndpoint;
+ __u8 bDebugOutEndpoint;
+} __attribute__((packed));
+
+
+struct usb_interface_assoc_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bFirstInterface;
+ __u8 bInterfaceCount;
+ __u8 bFunctionClass;
+ __u8 bFunctionSubClass;
+ __u8 bFunctionProtocol;
+ __u8 iFunction;
+} __attribute__ ((packed));
+
+
+
+struct usb_security_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumEncryptionTypes;
+} __attribute__((packed));
+
+
+struct usb_key_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 bKeyData[0];
+} __attribute__((packed));
+
+
+struct usb_encryption_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEncryptionType;
+#define USB_ENC_TYPE_UNSECURE 0
+#define USB_ENC_TYPE_WIRED 1
+#define USB_ENC_TYPE_CCM_1 2
+#define USB_ENC_TYPE_RSA_1 3
+ __u8 bEncryptionValue;
+ __u8 bAuthKeyIndex;
+} __attribute__((packed));
+
+
+
+struct usb_bos_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumDeviceCaps;
+} __attribute__((packed));
+
+#define USB_DT_BOS_SIZE 5
+
+struct usb_dev_cap_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+} __attribute__((packed));
+
+#define USB_CAP_TYPE_WIRELESS_USB 1
+
+struct usb_wireless_cap_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+
+ __u8 bmAttributes;
+#define USB_WIRELESS_P2P_DRD (1 << 1)
+#define USB_WIRELESS_BEACON_MASK (3 << 2)
+#define USB_WIRELESS_BEACON_SELF (1 << 2)
+#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
+#define USB_WIRELESS_BEACON_NONE (3 << 2)
+ __le16 wPHYRates;
+#define USB_WIRELESS_PHY_53 (1 << 0)
+#define USB_WIRELESS_PHY_80 (1 << 1)
+#define USB_WIRELESS_PHY_107 (1 << 2)
+#define USB_WIRELESS_PHY_160 (1 << 3)
+#define USB_WIRELESS_PHY_200 (1 << 4)
+#define USB_WIRELESS_PHY_320 (1 << 5)
+#define USB_WIRELESS_PHY_400 (1 << 6)
+#define USB_WIRELESS_PHY_480 (1 << 7)
+ __u8 bmTFITXPowerInfo;
+ __u8 bmFFITXPowerInfo;
+ __le16 bmBandGroup;
+ __u8 bReserved;
+} __attribute__((packed));
+
+#define USB_CAP_TYPE_EXT 2
+
+struct usb_ext_cap_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __le32 bmAttributes;
+#define USB_LPM_SUPPORT (1 << 1)
+#define USB_BESL_SUPPORT (1 << 2)
+#define USB_BESL_BASELINE_VALID (1 << 3)
+#define USB_BESL_DEEP_VALID (1 << 4)
+#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
+} __attribute__((packed));
+
+#define USB_DT_USB_EXT_CAP_SIZE 7
+
+#define USB_SS_CAP_TYPE 3
+struct usb_ss_cap_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bmAttributes;
+#define USB_LTM_SUPPORT (1 << 1)
+ __le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION (1)
+#define USB_FULL_SPEED_OPERATION (1 << 1)
+#define USB_HIGH_SPEED_OPERATION (1 << 2)
+#define USB_5GBPS_OPERATION (1 << 3)
+ __u8 bFunctionalitySupport;
+ __u8 bU1devExitLat;
+ __le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE 10
+
+#define CONTAINER_ID_TYPE 4
+struct usb_ss_container_id_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved;
+ __u8 ContainerID[16];
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE 20
+
+struct usb_wireless_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bMaxSequence;
+ __le16 wMaxStreamDelay;
+ __le16 wOverTheAirPacketSize;
+ __u8 bOverTheAirInterval;
+ __u8 bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK 0x03
+#define USB_ENDPOINT_SWITCH_NO 0
+#define USB_ENDPOINT_SWITCH_SWITCH 1
+#define USB_ENDPOINT_SWITCH_SCALE 2
+} __attribute__((packed));
+
+
+struct usb_handshake {
+ __u8 bMessageNumber;
+ __u8 bStatus;
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 CDID[16];
+ __u8 nonce[16];
+ __u8 MIC[8];
+} __attribute__((packed));
+
+
+struct usb_connection_context {
+ __u8 CHID[16];
+ __u8 CDID[16];
+ __u8 CK[16];
+} __attribute__((packed));
+
+
+
+enum usb_device_speed {
+ USB_SPEED_UNKNOWN = 0,
+ USB_SPEED_LOW, USB_SPEED_FULL,
+ USB_SPEED_HIGH,
+ USB_SPEED_WIRELESS,
+ USB_SPEED_SUPER,
+};
+
+#ifdef __KERNEL__
+
+extern const char *usb_speed_string(enum usb_device_speed speed);
+
+#endif
+
+enum usb_device_state {
+ USB_STATE_NOTATTACHED = 0,
+
+
+ USB_STATE_ATTACHED,
+ USB_STATE_POWERED,
+ USB_STATE_RECONNECTING,
+ USB_STATE_UNAUTHENTICATED,
+ USB_STATE_DEFAULT,
+ USB_STATE_ADDRESS,
+ USB_STATE_CONFIGURED,
+
+ USB_STATE_SUSPENDED
+
+};
+
+
+#define USB_SELF_POWER_VBUS_MAX_DRAW 100
+
+#endif
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
new file mode 100644
index 0000000..153b7b3
--- /dev/null
+++ b/include/linux/usb/composite.h
@@ -0,0 +1,194 @@
+/*
+ * composite.h -- framework for usb gadgets which are composite devices
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __LINUX_USB_COMPOSITE_H
+#define __LINUX_USB_COMPOSITE_H
+
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/switch.h>
+
+#define USB_GADGET_DELAYED_STATUS 0x7fff
+
+struct usb_configuration;
+
+struct usb_function {
+ const char *name;
+ struct usb_gadget_strings **strings;
+ struct usb_descriptor_header **descriptors;
+ struct usb_descriptor_header **hs_descriptors;
+ struct usb_descriptor_header **ss_descriptors;
+
+ struct usb_configuration *config;
+
+
+
+ int (*bind)(struct usb_configuration *,
+ struct usb_function *);
+ void (*unbind)(struct usb_configuration *,
+ struct usb_function *);
+
+
+ int (*set_alt)(struct usb_function *,
+ unsigned interface, unsigned alt);
+ int (*get_alt)(struct usb_function *,
+ unsigned interface);
+ void (*disable)(struct usb_function *);
+ int (*setup)(struct usb_function *,
+ const struct usb_ctrlrequest *);
+ void (*suspend)(struct usb_function *);
+ void (*resume)(struct usb_function *);
+
+
+ int (*get_status)(struct usb_function *);
+ int (*func_suspend)(struct usb_function *,
+ u8 suspend_opt);
+
+
+ struct list_head list;
+ DECLARE_BITMAP(endpoints, 32);
+};
+
+int usb_add_function(struct usb_configuration *, struct usb_function *);
+
+int usb_function_deactivate(struct usb_function *);
+int usb_function_activate(struct usb_function *);
+
+int usb_interface_id(struct usb_configuration *, struct usb_function *);
+
+int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
+ struct usb_ep *_ep);
+
+#define MAX_CONFIG_INTERFACES 16
+
+struct usb_configuration {
+ const char *label;
+ struct usb_gadget_strings **strings;
+ const struct usb_descriptor_header **descriptors;
+
+
+
+ void (*unbind)(struct usb_configuration *);
+ int (*setup)(struct usb_configuration *,
+ const struct usb_ctrlrequest *);
+
+
+ u8 bConfigurationValue;
+ u8 iConfiguration;
+ u8 bmAttributes;
+ u8 bMaxPower;
+
+ struct usb_composite_dev *cdev;
+
+
+
+ struct list_head list;
+ struct list_head functions;
+ u8 next_interface_id;
+ unsigned superspeed:1;
+ unsigned highspeed:1;
+ unsigned fullspeed:1;
+ struct usb_function *interface[MAX_CONFIG_INTERFACES];
+};
+
+int usb_add_config(struct usb_composite_dev *,
+ struct usb_configuration *,
+ int (*)(struct usb_configuration *));
+
+int usb_remove_config(struct usb_composite_dev *,
+ struct usb_configuration *);
+
+struct usb_composite_driver {
+ const char *name;
+ const char *iProduct;
+ const char *iManufacturer;
+ const struct usb_device_descriptor *dev;
+ struct usb_gadget_strings **strings;
+ enum usb_device_speed max_speed;
+ unsigned needs_serial:1;
+
+ int (*unbind)(struct usb_composite_dev *);
+
+ void (*disconnect)(struct usb_composite_dev *);
+
+
+ void (*suspend)(struct usb_composite_dev *);
+ void (*resume)(struct usb_composite_dev *);
+};
+
+extern int usb_composite_probe(struct usb_composite_driver *driver,
+ int (*bind)(struct usb_composite_dev *cdev));
+extern void usb_composite_unregister(struct usb_composite_driver *driver);
+extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
+
+
+struct usb_composite_dev {
+ struct usb_gadget *gadget;
+ struct usb_request *req;
+ unsigned bufsiz;
+
+ struct usb_configuration *config;
+
+
+
+ unsigned int suspended:1;
+ struct usb_device_descriptor desc;
+ struct list_head configs;
+ struct usb_composite_driver *driver;
+ u8 next_string_id;
+ u8 manufacturer_override;
+ u8 product_override;
+ u8 serial_override;
+
+ unsigned deactivations;
+
+ int delayed_status;
+
+
+ spinlock_t lock;
+
+
+ struct switch_dev sw_connect2pc;
+
+ bool connected;
+
+ struct work_struct switch_work;
+ struct delayed_work request_reset;
+};
+
+extern int usb_string_id(struct usb_composite_dev *c);
+extern int usb_string_ids_tab(struct usb_composite_dev *c,
+ struct usb_string *str);
+extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+
+
+#define DBG(d, fmt, args...) \
+ dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+ dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+ dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARNING(d, fmt, args...) \
+ dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+ dev_info(&(d)->gadget->dev , fmt , ## args)
+
+#endif
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
new file mode 100644
index 0000000..6721e39
--- /dev/null
+++ b/include/linux/usb/ehci_def.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_EHCI_DEF_H
+#define __LINUX_USB_EHCI_DEF_H
+
+
+struct ehci_caps {
+ u32 hc_capbase;
+#define HC_LENGTH(ehci, p) (0x00ff&((p) >> \
+ (ehci_big_endian_capbase(ehci) ? 24 : 0)))
+#define HC_VERSION(ehci, p) (0xffff&((p) >> \
+ (ehci_big_endian_capbase(ehci) ? 0 : 16)))
+ u32 hcs_params;
+#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf)
+#define HCS_INDICATOR(p) ((p)&(1 << 16))
+#define HCS_N_CC(p) (((p)>>12)&0xf)
+#define HCS_N_PCC(p) (((p)>>8)&0xf)
+#define HCS_PORTROUTED(p) ((p)&(1 << 7))
+#define HCS_PPC(p) ((p)&(1 << 4))
+#define HCS_N_PORTS(p) (((p)>>0)&0xf)
+
+ u32 hcc_params;
+#define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19))
+#define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18))
+#define HCC_LPM(p) ((p)&(1 << 17))
+#define HCC_HW_PREFETCH(p) ((p)&(1 << 16))
+
+#define HCC_EXT_CAPS(p) (((p)>>8)&0xff)
+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7))
+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7)
+#define HCC_CANPARK(p) ((p)&(1 << 2))
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))
+#define HCC_64BIT_ADDR(p) ((p)&(1))
+ u8 portroute[8];
+};
+
+
+struct ehci_regs {
+
+
+ u32 command;
+
+#define CMD_HIRD (0xf<<24)
+#define CMD_PPCEE (1<<15)
+#define CMD_FSP (1<<14)
+#define CMD_ASPE (1<<13)
+#define CMD_PSPE (1<<12)
+#define CMD_PARK (1<<11)
+#define CMD_PARK_CNT(c) (((c)>>8)&3)
+#define CMD_LRESET (1<<7)
+#define CMD_IAAD (1<<6)
+#define CMD_ASE (1<<5)
+#define CMD_PSE (1<<4)
+#define CMD_RESET (1<<1)
+#define CMD_RUN (1<<0)
+
+
+ u32 status;
+#define STS_PPCE_MASK (0xff<<16)
+#define STS_ASS (1<<15)
+#define STS_PSS (1<<14)
+#define STS_RECL (1<<13)
+#define STS_HALT (1<<12)
+
+#define STS_IAA (1<<5)
+#define STS_FATAL (1<<4)
+#define STS_FLR (1<<3)
+#define STS_PCD (1<<2)
+#define STS_ERR (1<<1)
+#define STS_INT (1<<0)
+
+
+ u32 intr_enable;
+
+
+ u32 frame_index;
+
+ u32 segment;
+
+ u32 frame_list;
+
+ u32 async_next;
+
+ u32 reserved[9];
+
+
+ u32 configured_flag;
+#define FLAG_CF (1<<0)
+
+
+ u32 port_status[0];
+#define PORTSC_SUSPEND_STS_ACK 0
+#define PORTSC_SUSPEND_STS_NYET 1
+#define PORTSC_SUSPEND_STS_STALL 2
+#define PORTSC_SUSPEND_STS_ERR 3
+
+#define PORT_DEV_ADDR (0x7f<<25)
+#define PORT_SSTS (0x3<<23)
+#define PORT_WKOC_E (1<<22)
+#define PORT_WKDISC_E (1<<21)
+#define PORT_WKCONN_E (1<<20)
+#define PORT_TEST(x) (((x)&0xf)<<16)
+#define PORT_TEST_PKT PORT_TEST(0x4)
+#define PORT_TEST_FORCE PORT_TEST(0x5)
+#define PORT_LED_OFF (0<<14)
+#define PORT_LED_AMBER (1<<14)
+#define PORT_LED_GREEN (2<<14)
+#define PORT_LED_MASK (3<<14)
+#define PORT_OWNER (1<<13)
+#define PORT_POWER (1<<12)
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))
+#define PORT_LPM (1<<9)
+#define PORT_RESET (1<<8)
+#define PORT_SUSPEND (1<<7)
+#define PORT_RESUME (1<<6)
+#define PORT_OCC (1<<5)
+#define PORT_OC (1<<4)
+#define PORT_PEC (1<<3)
+#define PORT_PE (1<<2)
+#define PORT_CSC (1<<1)
+#define PORT_CONNECT (1<<0)
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+};
+
+#define USBMODE 0x68
+#define USBMODE_SDIS (1<<3)
+#define USBMODE_BE (1<<2)
+#define USBMODE_CM_HC (3<<0)
+#define USBMODE_CM_IDLE (0<<0)
+
+#define HOSTPC0 0x84
+#define HOSTPC_PHCD (1<<22)
+#define HOSTPC_PSPD (3<<25)
+#define USBMODE_EX 0xc8
+#define USBMODE_EX_VBPS (1<<5)
+#define USBMODE_EX_HC (3<<0)
+#define TXFILLTUNING 0x24
+#define TXFIFO_DEFAULT (8<<16)
+
+struct ehci_dbg_port {
+ u32 control;
+#define DBGP_OWNER (1<<30)
+#define DBGP_ENABLED (1<<28)
+#define DBGP_DONE (1<<16)
+#define DBGP_INUSE (1<<10)
+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
+# define DBGP_ERR_BAD 1
+# define DBGP_ERR_SIGNAL 2
+#define DBGP_ERROR (1<<6)
+#define DBGP_GO (1<<5)
+#define DBGP_OUT (1<<4)
+#define DBGP_LEN(x) (((x)>>0)&0x0f)
+ u32 pids;
+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
+ u32 data03;
+ u32 data47;
+ u32 address;
+#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
+};
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+#include <linux/init.h>
+extern int __init early_dbgp_init(char *s);
+extern struct console early_dbgp_console;
+#endif
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+extern int dbgp_external_startup(void);
+extern int dbgp_reset_prep(void);
+#else
+static inline int dbgp_reset_prep(void)
+{
+ return 1;
+}
+static inline int dbgp_external_startup(void)
+{
+ return -1;
+}
+#endif
+
+#endif
diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h
new file mode 100644
index 0000000..1894f42
--- /dev/null
+++ b/include/linux/usb/ehci_pdriver.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_EHCI_PDRIVER_H
+#define __USB_CORE_EHCI_PDRIVER_H
+
+/**
+ * struct usb_ehci_pdata - platform_data for generic ehci driver
+ *
+ * @caps_offset: offset of the EHCI Capability Registers to the start of
+ * the io memory region provided to the driver.
+ * @has_tt: set to 1 if TT is integrated in root hub.
+ * @port_power_on: set to 1 if the controller needs a power up after
+ * initialization.
+ * @port_power_off: set to 1 if the controller needs to be powered down
+ * after initialization.
+ *
+ * These are general configuration options for the EHCI controller. All of
+ * these options are activating more or less workarounds for some hardware.
+ */
+struct usb_ehci_pdata {
+ int caps_offset;
+ unsigned has_tt:1;
+ unsigned has_synopsys_hc_bug:1;
+ unsigned big_endian_desc:1;
+ unsigned big_endian_mmio:1;
+ unsigned port_power_on:1;
+ unsigned port_power_off:1;
+};
+
+#endif /* __USB_CORE_EHCI_PDRIVER_H */
diff --git a/include/linux/usb/f_accessory.h b/include/linux/usb/f_accessory.h
new file mode 100644
index 0000000..3e4cdb2
--- /dev/null
+++ b/include/linux/usb/f_accessory.h
@@ -0,0 +1,49 @@
+/*
+ * Gadget Function Driver for Android USB accessories
+ *
+ * Copyright (C) 2011 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_F_ACCESSORY_H
+#define __LINUX_USB_F_ACCESSORY_H
+
+#define USB_ACCESSORY_VENDOR_ID 0x18D1
+
+
+#define USB_ACCESSORY_PRODUCT_ID 0x2D00
+
+#define USB_ACCESSORY_ADB_PRODUCT_ID 0x2D01
+
+#define ACCESSORY_STRING_MANUFACTURER 0
+#define ACCESSORY_STRING_MODEL 1
+#define ACCESSORY_STRING_DESCRIPTION 2
+#define ACCESSORY_STRING_VERSION 3
+#define ACCESSORY_STRING_URI 4
+#define ACCESSORY_STRING_SERIAL 5
+
+#define ACCESSORY_GET_PROTOCOL 51
+
+#define ACCESSORY_SEND_STRING 52
+
+#define ACCESSORY_START 53
+
+#define ACCESSORY_GET_STRING_MANUFACTURER _IOW('M', 1, char[256])
+#define ACCESSORY_GET_STRING_MODEL _IOW('M', 2, char[256])
+#define ACCESSORY_GET_STRING_DESCRIPTION _IOW('M', 3, char[256])
+#define ACCESSORY_GET_STRING_VERSION _IOW('M', 4, char[256])
+#define ACCESSORY_GET_STRING_URI _IOW('M', 5, char[256])
+#define ACCESSORY_GET_STRING_SERIAL _IOW('M', 6, char[256])
+#define ACCESSORY_IS_START_REQUESTED _IO('M', 7)
+
+#endif
diff --git a/include/linux/usb/f_mtp.h b/include/linux/usb/f_mtp.h
new file mode 100644
index 0000000..35aa4b6
--- /dev/null
+++ b/include/linux/usb/f_mtp.h
@@ -0,0 +1,63 @@
+/*
+ * Gadget Function Driver for MTP
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_F_MTP_H
+#define __LINUX_USB_F_MTP_H
+
+#include <linux/ioctl.h>
+
+#ifdef __KERNEL__
+
+struct mtp_data_header {
+
+ uint32_t length;
+
+ uint16_t type;
+
+ uint16_t command;
+
+ uint32_t transaction_id;
+};
+
+#endif
+
+struct mtp_file_range {
+
+ int fd;
+
+ loff_t offset;
+
+ int64_t length;
+ uint16_t command;
+ uint32_t transaction_id;
+};
+
+struct mtp_event {
+
+ size_t length;
+
+ void *data;
+};
+
+#define MTP_SEND_FILE _IOW('M', 0, struct mtp_file_range)
+#define MTP_RECEIVE_FILE _IOW('M', 1, struct mtp_file_range)
+#define MTP_SEND_EVENT _IOW('M', 3, struct mtp_event)
+#define MTP_SEND_FILE_WITH_HEADER _IOW('M', 4, struct mtp_file_range)
+
+#define MTP_SET_CPU_PERF _IOW('M', 5, int)
+
+#endif
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
new file mode 100644
index 0000000..7587ef9
--- /dev/null
+++ b/include/linux/usb/functionfs.h
@@ -0,0 +1,199 @@
+#ifndef __LINUX_FUNCTIONFS_H__
+#define __LINUX_FUNCTIONFS_H__ 1
+
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
+
+enum {
+ FUNCTIONFS_DESCRIPTORS_MAGIC = 1,
+ FUNCTIONFS_STRINGS_MAGIC = 2
+};
+
+
+#ifndef __KERNEL__
+
+/* Descriptor of an non-audio endpoint */
+struct usb_endpoint_descriptor_no_audio {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEndpointAddress;
+ __u8 bmAttributes;
+ __le16 wMaxPacketSize;
+ __u8 bInterval;
+} __attribute__((packed));
+
+
+/*
+ * All numbers must be in little endian order.
+ */
+
+struct usb_functionfs_descs_head {
+ __le32 magic;
+ __le32 length;
+ __le32 fs_count;
+ __le32 hs_count;
+} __attribute__((packed));
+
+/*
+ * Descriptors format:
+ *
+ * | off | name | type | description |
+ * |-----+-----------+--------------+--------------------------------------|
+ * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC |
+ * | 4 | length | LE32 | length of the whole data chunk |
+ * | 8 | fs_count | LE32 | number of full-speed descriptors |
+ * | 12 | hs_count | LE32 | number of high-speed descriptors |
+ * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors |
+ * | | hs_descrs | Descriptor[] | list of high-speed descriptors |
+ *
+ * descs are just valid USB descriptors and have the following format:
+ *
+ * | off | name | type | description |
+ * |-----+-----------------+------+--------------------------|
+ * | 0 | bLength | U8 | length of the descriptor |
+ * | 1 | bDescriptorType | U8 | descriptor type |
+ * | 2 | payload | | descriptor's payload |
+ */
+
+struct usb_functionfs_strings_head {
+ __le32 magic;
+ __le32 length;
+ __le32 str_count;
+ __le32 lang_count;
+} __attribute__((packed));
+
+/*
+ * Strings format:
+ *
+ * | off | name | type | description |
+ * |-----+------------+-----------------------+----------------------------|
+ * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC |
+ * | 4 | length | LE32 | length of the data chunk |
+ * | 8 | str_count | LE32 | number of strings |
+ * | 12 | lang_count | LE32 | number of languages |
+ * | 16 | stringtab | StringTab[lang_count] | table of strings per lang |
+ *
+ * For each language there is one stringtab entry (ie. there are lang_count
+ * stringtab entires). Each StringTab has following format:
+ *
+ * | off | name | type | description |
+ * |-----+---------+-------------------+------------------------------------|
+ * | 0 | lang | LE16 | language code |
+ * | 2 | strings | String[str_count] | array of strings in given language |
+ *
+ * For each string there is one strings entry (ie. there are str_count
+ * string entries). Each String is a NUL terminated string encoded in
+ * UTF-8.
+ */
+
+#endif
+
+
+/*
+ * Events are delivered on the ep0 file descriptor, when the user mode driver
+ * reads from this file descriptor after writing the descriptors. Don't
+ * stop polling this descriptor.
+ */
+
+enum usb_functionfs_event_type {
+ FUNCTIONFS_BIND,
+ FUNCTIONFS_UNBIND,
+
+ FUNCTIONFS_ENABLE,
+ FUNCTIONFS_DISABLE,
+
+ FUNCTIONFS_SETUP,
+
+ FUNCTIONFS_SUSPEND,
+ FUNCTIONFS_RESUME
+};
+
+/* NOTE: this structure must stay the same size and layout on
+ * both 32-bit and 64-bit kernels.
+ */
+struct usb_functionfs_event {
+ union {
+ /* SETUP: packet; DATA phase i/o precedes next event
+ *(setup.bmRequestType & USB_DIR_IN) flags direction */
+ struct usb_ctrlrequest setup;
+ } __attribute__((packed)) u;
+
+ /* enum usb_functionfs_event_type */
+ __u8 type;
+ __u8 _pad[3];
+} __attribute__((packed));
+
+
+/* Endpoint ioctls */
+/* The same as in gadgetfs */
+
+/* IN transfers may be reported to the gadget driver as complete
+ * when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ * complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define FUNCTIONFS_FIFO_STATUS _IO('g', 1)
+
+/* discards any unclaimed data in the fifo. */
+#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define FUNCTIONFS_CLEAR_HALT _IO('g', 3)
+
+/* Specific for functionfs */
+
+/*
+ * Returns reverse mapping of an interface. Called on EP0. If there
+ * is no such interface returns -EDOM. If function is not active
+ * returns -ENODEV.
+ */
+#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128)
+
+/*
+ * Returns real bEndpointAddress of an endpoint. If function is not
+ * active returns -ENODEV.
+ */
+#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129)
+
+
+#ifdef __KERNEL__
+
+struct ffs_data;
+struct usb_composite_dev;
+struct usb_configuration;
+
+
+static int functionfs_init(void) __attribute__((warn_unused_result));
+static void functionfs_cleanup(void);
+
+static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
+ __attribute__((warn_unused_result, nonnull));
+static void functionfs_unbind(struct ffs_data *ffs)
+ __attribute__((nonnull));
+
+static int functionfs_bind_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *c,
+ struct ffs_data *ffs)
+ __attribute__((warn_unused_result, nonnull));
+
+
+static int functionfs_ready_callback(struct ffs_data *ffs)
+ __attribute__((warn_unused_result, nonnull));
+static void functionfs_closed_callback(struct ffs_data *ffs)
+ __attribute__((nonnull));
+static int functionfs_check_dev_callback(const char *dev_name)
+ __attribute__((warn_unused_result, nonnull));
+
+
+#endif
+
+#endif
diff --git a/include/linux/usb/g_hid.h b/include/linux/usb/g_hid.h
new file mode 100644
index 0000000..50f5745
--- /dev/null
+++ b/include/linux/usb/g_hid.h
@@ -0,0 +1,32 @@
+/*
+ * g_hid.h -- Header file for USB HID gadget driver
+ *
+ * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_G_HID_H
+#define __LINUX_USB_G_HID_H
+
+struct hidg_func_descriptor {
+ unsigned char subclass;
+ unsigned char protocol;
+ unsigned short report_length;
+ unsigned short report_desc_length;
+ unsigned char report_desc[];
+};
+
+#endif /* __LINUX_USB_G_HID_H */
diff --git a/include/linux/usb/g_printer.h b/include/linux/usb/g_printer.h
new file mode 100644
index 0000000..6178fde
--- /dev/null
+++ b/include/linux/usb/g_printer.h
@@ -0,0 +1,35 @@
+/*
+ * g_printer.h -- Header file for USB Printer gadget driver
+ *
+ * Copyright (C) 2007 Craig W. Nadler
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_G_PRINTER_H
+#define __LINUX_USB_G_PRINTER_H
+
+#define PRINTER_NOT_ERROR 0x08
+#define PRINTER_SELECTED 0x10
+#define PRINTER_PAPER_EMPTY 0x20
+
+/* The 'g' code is also used by gadgetfs ioctl requests.
+ * Don't add any colliding codes to either driver, and keep
+ * them in unique ranges (size 0x20 for now).
+ */
+#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char)
+#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char)
+
+#endif /* __LINUX_USB_G_PRINTER_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
new file mode 100644
index 0000000..6043a75
--- /dev/null
+++ b/include/linux/usb/gadget.h
@@ -0,0 +1,537 @@
+/*
+ * <linux/usb/gadget.h>
+ *
+ * We call the USB code inside a Linux-based peripheral device a "gadget"
+ * driver, except for the hardware-specific bus glue. One USB host can
+ * master many USB gadgets, but the gadgets are only slaved to one host.
+ *
+ *
+ * (C) Copyright 2002-2004 by David Brownell
+ * All Rights Reserved.
+ *
+ * This software is licensed under the GNU GPL version 2.
+ */
+
+#ifndef __LINUX_USB_GADGET_H
+#define __LINUX_USB_GADGET_H
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+
+struct usb_ep;
+
+/**
+ * struct usb_request - describes one i/o request
+ * @buf: Buffer used for data. Always provide this; some controllers
+ * only use PIO, or don't use DMA for some endpoints.
+ * @dma: DMA address corresponding to 'buf'. If you don't set this
+ * field, and the usb controller needs one, it is responsible
+ * for mapping and unmapping the buffer.
+ * @sg: a scatterlist for SG-capable controllers.
+ * @num_sgs: number of SG entries
+ * @num_mapped_sgs: number of SG entries mapped to DMA (internal)
+ * @length: Length of that data
+ * @stream_id: The stream id, when USB3.0 bulk streams are being used
+ * @no_interrupt: If true, hints that no completion irq is needed.
+ * Helpful sometimes with deep request queues that are handled
+ * directly by DMA controllers.
+ * @zero: If true, when writing data, makes the last packet be "short"
+ * by adding a zero length packet as needed;
+ * @short_not_ok: When reading data, makes short packets be
+ * treated as errors (queue stops advancing till cleanup).
+ * @complete: Function called when request completes, so this request and
+ * its buffer may be re-used. The function will always be called with
+ * interrupts disabled, and it must not sleep.
+ * Reads terminate with a short packet, or when the buffer fills,
+ * whichever comes first. When writes terminate, some data bytes
+ * will usually still be in flight (often in a hardware fifo).
+ * Errors (for reads or writes) stop the queue from advancing
+ * until the completion function returns, so that any transfers
+ * invalidated by the error may first be dequeued.
+ * @context: For use by the completion callback
+ * @list: For use by the gadget driver.
+ * @status: Reports completion code, zero or a negative errno.
+ * Normally, faults block the transfer queue from advancing until
+ * the completion callback returns.
+ * Code "-ESHUTDOWN" indicates completion caused by device disconnect,
+ * or when the driver disabled the endpoint.
+ * @actual: Reports bytes transferred to/from the buffer. For reads (OUT
+ * transfers) this may be less than the requested length. If the
+ * short_not_ok flag is set, short reads are treated as errors
+ * even when status otherwise indicates successful completion.
+ * Note that for writes (IN transfers) some data bytes may still
+ * reside in a device-side FIFO when the request is reported as
+ * complete.
+ *@udc_priv: Vendor private data in usage by the UDC.
+ *
+ * These are allocated/freed through the endpoint they're used with. The
+ * hardware's driver can add extra per-request data to the memory it returns,
+ * which often avoids separate memory allocations (potential failures),
+ * later when the request is queued.
+ *
+ * Request flags affect request handling, such as whether a zero length
+ * packet is written (the "zero" flag), whether a short read should be
+ * treated as an error (blocking request queue advance, the "short_not_ok"
+ * flag), or hinting that an interrupt is not required (the "no_interrupt"
+ * flag, for use with deep request queues).
+ *
+ * Bulk endpoints can use any size buffers, and can also be used for interrupt
+ * transfers. interrupt-only endpoints can be much less functional.
+ *
+ * NOTE: this is analogous to 'struct urb' on the host side, except that
+ * it's thinner and promotes more pre-allocation.
+ */
+
+struct usb_request {
+ void *buf;
+ unsigned length;
+ dma_addr_t dma;
+
+ struct scatterlist *sg;
+ unsigned num_sgs;
+ unsigned num_mapped_sgs;
+
+ unsigned stream_id:16;
+ unsigned no_interrupt:1;
+ unsigned zero:1;
+ unsigned short_not_ok:1;
+
+ void (*complete)(struct usb_ep *ep,
+ struct usb_request *req);
+ void *context;
+ struct list_head list;
+
+ int status;
+ unsigned actual;
+ unsigned udc_priv;
+};
+
+
+struct usb_ep_ops {
+ int (*enable) (struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *desc);
+ int (*disable) (struct usb_ep *ep);
+
+ struct usb_request *(*alloc_request) (struct usb_ep *ep,
+ gfp_t gfp_flags);
+ void (*free_request) (struct usb_ep *ep, struct usb_request *req);
+ int (*queue) (struct usb_ep *ep, struct usb_request *req,
+ gfp_t gfp_flags);
+ int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
+
+ int (*set_halt) (struct usb_ep *ep, int value);
+ int (*set_wedge) (struct usb_ep *ep);
+
+ int (*fifo_status) (struct usb_ep *ep);
+ void (*fifo_flush) (struct usb_ep *ep);
+};
+
+struct usb_ep {
+ void *driver_data;
+
+ const char *name;
+ const struct usb_ep_ops *ops;
+ struct list_head ep_list;
+ unsigned maxpacket:16;
+ unsigned max_streams:16;
+ unsigned mult:2;
+ unsigned maxburst:5;
+ u8 address;
+ const struct usb_endpoint_descriptor *desc;
+ const struct usb_ss_ep_comp_descriptor *comp_desc;
+};
+
+
+static inline int usb_ep_enable(struct usb_ep *ep)
+{
+ return ep->ops->enable(ep, ep->desc);
+}
+
+static inline int usb_ep_disable(struct usb_ep *ep)
+{
+ return ep->ops->disable(ep);
+}
+
+static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
+ gfp_t gfp_flags)
+{
+ return ep->ops->alloc_request(ep, gfp_flags);
+}
+
+static inline void usb_ep_free_request(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ ep->ops->free_request(ep, req);
+}
+
+/**
+ * usb_ep_queue - queues (submits) an I/O request to an endpoint.
+ * @ep:the endpoint associated with the request
+ * @req:the request being submitted
+ * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
+ * pre-allocate all necessary memory with the request.
+ *
+ * This tells the device controller to perform the specified request through
+ * that endpoint (reading or writing a buffer). When the request completes,
+ * including being canceled by usb_ep_dequeue(), the request's completion
+ * routine is called to return the request to the driver. Any endpoint
+ * (except control endpoints like ep0) may have more than one transfer
+ * request queued; they complete in FIFO order. Once a gadget driver
+ * submits a request, that request may not be examined or modified until it
+ * is given back to that driver through the completion callback.
+ *
+ * Each request is turned into one or more packets. The controller driver
+ * never merges adjacent requests into the same packet. OUT transfers
+ * will sometimes use data that's already buffered in the hardware.
+ * Drivers can rely on the fact that the first byte of the request's buffer
+ * always corresponds to the first byte of some USB packet, for both
+ * IN and OUT transfers.
+ *
+ * Bulk endpoints can queue any amount of data; the transfer is packetized
+ * automatically. The last packet will be short if the request doesn't fill it
+ * out completely. Zero length packets (ZLPs) should be avoided in portable
+ * protocols since not all usb hardware can successfully handle zero length
+ * packets. (ZLPs may be explicitly written, and may be implicitly written if
+ * the request 'zero' flag is set.) Bulk endpoints may also be used
+ * for interrupt transfers; but the reverse is not true, and some endpoints
+ * won't support every interrupt transfer. (Such as 768 byte packets.)
+ *
+ * Interrupt-only endpoints are less functional than bulk endpoints, for
+ * example by not supporting queueing or not handling buffers that are
+ * larger than the endpoint's maxpacket size. They may also treat data
+ * toggle differently.
+ *
+ * Control endpoints ... after getting a setup() callback, the driver queues
+ * one response (even if it would be zero length). That enables the
+ * status ack, after transferring data as specified in the response. Setup
+ * functions may return negative error codes to generate protocol stalls.
+ * (Note that some USB device controllers disallow protocol stall responses
+ * in some cases.) When control responses are deferred (the response is
+ * written after the setup callback returns), then usb_ep_set_halt() may be
+ * used on ep0 to trigger protocol stalls. Depending on the controller,
+ * it may not be possible to trigger a status-stage protocol stall when the
+ * data stage is over, that is, from within the response's completion
+ * routine.
+ *
+ * For periodic endpoints, like interrupt or isochronous ones, the usb host
+ * arranges to poll once per interval, and the gadget driver usually will
+ * have queued some data to transfer at that time.
+ *
+ * Returns zero, or a negative error code. Endpoints that are not enabled
+ * report errors; errors will also be
+ * reported when the usb peripheral is disconnected.
+ */
+static inline int usb_ep_queue(struct usb_ep *ep,
+ struct usb_request *req, gfp_t gfp_flags)
+{
+ return ep->ops->queue(ep, req, gfp_flags);
+}
+
+static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+ return ep->ops->dequeue(ep, req);
+}
+
+static inline int usb_ep_set_halt(struct usb_ep *ep)
+{
+ return ep->ops->set_halt(ep, 1);
+}
+
+static inline int usb_ep_clear_halt(struct usb_ep *ep)
+{
+ return ep->ops->set_halt(ep, 0);
+}
+
+static inline int
+usb_ep_set_wedge(struct usb_ep *ep)
+{
+ if (ep->ops->set_wedge)
+ return ep->ops->set_wedge(ep);
+ else
+ return ep->ops->set_halt(ep, 1);
+}
+
+/**
+ * usb_ep_fifo_status - returns number of bytes in fifo, or error
+ * @ep: the endpoint whose fifo status is being checked.
+ *
+ * FIFO endpoints may have "unclaimed data" in them in certain cases,
+ * such as after aborted transfers. Hosts may not have collected all
+ * the IN data written by the gadget driver (and reported by a request
+ * completion). The gadget driver may not have collected all the data
+ * written OUT to it by the host. Drivers that need precise handling for
+ * fault reporting or recovery may need to use this call.
+ *
+ * This returns the number of such bytes in the fifo, or a negative
+ * errno if the endpoint doesn't use a FIFO or doesn't support such
+ * precise handling.
+ */
+static inline int usb_ep_fifo_status(struct usb_ep *ep)
+{
+ if (ep->ops->fifo_status)
+ return ep->ops->fifo_status(ep);
+ else
+ return -EOPNOTSUPP;
+}
+
+static inline void usb_ep_fifo_flush(struct usb_ep *ep)
+{
+ if (ep->ops->fifo_flush)
+ ep->ops->fifo_flush(ep);
+}
+
+
+
+struct usb_dcd_config_params {
+ __u8 bU1devExitLat;
+#define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01
+ __le16 bU2DevExitLat;
+#define USB_DEFAULT_U2_DEV_EXIT_LAT 0x1F4
+};
+
+
+struct usb_gadget;
+struct usb_gadget_driver;
+
+struct usb_gadget_ops {
+ int (*get_frame)(struct usb_gadget *);
+ int (*wakeup)(struct usb_gadget *);
+ int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
+ int (*vbus_session) (struct usb_gadget *, int is_active);
+ int (*vbus_draw) (struct usb_gadget *, unsigned mA);
+ int (*pullup) (struct usb_gadget *, int is_on);
+ int (*ioctl)(struct usb_gadget *,
+ unsigned code, unsigned long param);
+ void (*get_config_params)(struct usb_dcd_config_params *);
+ int (*udc_start)(struct usb_gadget *,
+ struct usb_gadget_driver *);
+ int (*udc_stop)(struct usb_gadget *,
+ struct usb_gadget_driver *);
+ int (*req_reset) (struct usb_gadget *);
+
+
+ int (*start)(struct usb_gadget_driver *,
+ int (*bind)(struct usb_gadget *));
+ int (*stop)(struct usb_gadget_driver *);
+};
+
+struct usb_gadget {
+
+ const struct usb_gadget_ops *ops;
+ struct usb_ep *ep0;
+ struct list_head ep_list;
+ enum usb_device_speed speed;
+ enum usb_device_speed max_speed;
+ unsigned sg_supported:1;
+ unsigned is_otg:1;
+ unsigned is_a_peripheral:1;
+ unsigned b_hnp_enable:1;
+ unsigned a_hnp_support:1;
+ unsigned a_alt_hnp_support:1;
+ unsigned host_request:1;
+ unsigned otg_srp_reqd:1;
+ const char *name;
+ struct device dev;
+ u8 usb_core_id;
+ int miMaxMtu;
+};
+
+static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
+ { dev_set_drvdata(&gadget->dev, data); }
+static inline void *get_gadget_data(struct usb_gadget *gadget)
+ { return dev_get_drvdata(&gadget->dev); }
+static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
+{
+ return container_of(dev, struct usb_gadget, dev);
+}
+
+#define gadget_for_each_ep(tmp, gadget) \
+ list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
+
+
+static inline int gadget_is_dualspeed(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+static inline int gadget_is_superspeed(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_GADGET_SUPERSPEED
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+static inline int gadget_is_otg(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_OTG
+ return g->is_otg;
+#else
+ return 0;
+#endif
+}
+
+static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
+{
+ return gadget->ops->get_frame(gadget);
+}
+
+static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->wakeup)
+ return -EOPNOTSUPP;
+ return gadget->ops->wakeup(gadget);
+}
+
+static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->set_selfpowered)
+ return -EOPNOTSUPP;
+ return gadget->ops->set_selfpowered(gadget, 1);
+}
+
+static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->set_selfpowered)
+ return -EOPNOTSUPP;
+ return gadget->ops->set_selfpowered(gadget, 0);
+}
+
+static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->vbus_session)
+ return -EOPNOTSUPP;
+ return gadget->ops->vbus_session(gadget, 1);
+}
+
+static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+ if (!gadget->ops->vbus_draw)
+ return -EOPNOTSUPP;
+ return gadget->ops->vbus_draw(gadget, mA);
+}
+
+static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->vbus_session)
+ return -EOPNOTSUPP;
+ return gadget->ops->vbus_session(gadget, 0);
+}
+
+static inline int usb_gadget_connect(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->pullup)
+ return -EOPNOTSUPP;
+ return gadget->ops->pullup(gadget, 1);
+}
+
+static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->pullup)
+ return -EOPNOTSUPP;
+ return gadget->ops->pullup(gadget, 0);
+}
+
+static inline int usb_gadget_request_reset(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->req_reset)
+ return -EOPNOTSUPP;
+ return gadget->ops->req_reset(gadget);
+}
+
+
+struct usb_gadget_driver {
+ char *function;
+ enum usb_device_speed max_speed;
+ void (*unbind)(struct usb_gadget *);
+ int (*setup)(struct usb_gadget *,
+ const struct usb_ctrlrequest *);
+ void (*disconnect)(struct usb_gadget *);
+ void (*mute_disconnect)(struct usb_gadget *);
+ void (*suspend)(struct usb_gadget *);
+ void (*resume)(struct usb_gadget *);
+
+
+ struct device_driver driver;
+
+ u8 usb_core_id;
+};
+
+
+
+
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+ int (*bind)(struct usb_gadget *));
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
+
+extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
+extern void usb_del_gadget_udc(struct usb_gadget *gadget);
+
+
+
+struct usb_string {
+ u8 id;
+ const char *s;
+};
+
+struct usb_gadget_strings {
+ u16 language;
+ struct usb_string *strings;
+};
+
+int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf);
+
+
+
+int
+usb_find_descriptor_fillbuf(void *, unsigned,
+ const struct usb_descriptor_header **, u8);
+
+int usb_descriptor_fillbuf(void *, unsigned,
+ const struct usb_descriptor_header **);
+
+int usb_gadget_config_buf(const struct usb_config_descriptor *config,
+ void *buf, unsigned buflen, const struct usb_descriptor_header **desc);
+
+struct usb_descriptor_header **usb_copy_descriptors(
+ struct usb_descriptor_header **);
+
+static inline void usb_free_descriptors(struct usb_descriptor_header **v)
+{
+ kfree(v);
+}
+
+
+
+extern int usb_gadget_map_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in);
+
+extern void usb_gadget_unmap_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in);
+
+
+
+extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
+ struct usb_endpoint_descriptor *);
+
+
+extern struct usb_ep *usb_ep_autoconfig_ss(struct usb_gadget *,
+ struct usb_endpoint_descriptor *,
+ struct usb_ss_ep_comp_descriptor *);
+
+extern void usb_ep_autoconfig_reset(struct usb_gadget *);
+
+#endif
diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
new file mode 100644
index 0000000..0bb12e0
--- /dev/null
+++ b/include/linux/usb/gadgetfs.h
@@ -0,0 +1,88 @@
+/*
+ * Filesystem based user-mode API to USB Gadget controller hardware
+ *
+ * Other than ep0 operations, most things are done by read() and write()
+ * on endpoint files found in one directory. They are configured by
+ * writing descriptors, and then may be used for normal stream style
+ * i/o requests. When ep0 is configured, the device can enumerate;
+ * when it's closed, the device disconnects from usb. Operations on
+ * ep0 require ioctl() operations.
+ *
+ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
+ * which may then be used to read usb_gadgetfs_event structs. The driver
+ * may activate endpoints as it handles SET_CONFIGURATION setup events,
+ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
+ * then performing data transfers by reading or writing.
+ */
+
+#ifndef __LINUX_USB_GADGETFS_H
+#define __LINUX_USB_GADGETFS_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
+/*
+ * Events are delivered on the ep0 file descriptor, when the user mode driver
+ * reads from this file descriptor after writing the descriptors. Don't
+ * stop polling this descriptor.
+ */
+
+enum usb_gadgetfs_event_type {
+ GADGETFS_NOP = 0,
+
+ GADGETFS_CONNECT,
+ GADGETFS_DISCONNECT,
+ GADGETFS_SETUP,
+ GADGETFS_SUSPEND,
+ /* and likely more ! */
+};
+
+/* NOTE: this structure must stay the same size and layout on
+ * both 32-bit and 64-bit kernels.
+ */
+struct usb_gadgetfs_event {
+ union {
+ /* NOP, DISCONNECT, SUSPEND: nothing
+ * ... some hardware can't report disconnection
+ */
+
+ /* CONNECT: just the speed */
+ enum usb_device_speed speed;
+
+ /* SETUP: packet; DATA phase i/o precedes next event
+ *(setup.bmRequestType & USB_DIR_IN) flags direction
+ * ... includes SET_CONFIGURATION, SET_INTERFACE
+ */
+ struct usb_ctrlrequest setup;
+ } u;
+ enum usb_gadgetfs_event_type type;
+};
+
+
+/* The 'g' code is also used by printer gadget ioctl requests.
+ * Don't add any colliding codes to either driver, and keep
+ * them in unique ranges (size 0x20 for now).
+ */
+
+/* endpoint ioctls */
+
+/* IN transfers may be reported to the gadget driver as complete
+ * when the fifo is loaded, before the host reads the data;
+ * OUT transfers may be reported to the host's "client" driver as
+ * complete when they're sitting in the FIFO unread.
+ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+ * (needed for precise fault handling, when the hardware allows it)
+ */
+#define GADGETFS_FIFO_STATUS _IO('g', 1)
+
+/* discards any unclaimed data in the fifo. */
+#define GADGETFS_FIFO_FLUSH _IO('g', 2)
+
+/* resets endpoint halt+toggle; used to implement set_interface.
+ * some hardware (like pxa2xx) can't support this.
+ */
+#define GADGETFS_CLEAR_HALT _IO('g', 3)
+
+#endif /* __LINUX_USB_GADGETFS_H */
diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
new file mode 100644
index 0000000..d9f03cc
--- /dev/null
+++ b/include/linux/usb/gpio_vbus.h
@@ -0,0 +1,30 @@
+/*
+ * A simple GPIO VBUS sensing driver for B peripheral only devices
+ * with internal transceivers.
+ * Optionally D+ pullup can be controlled by a second GPIO.
+ *
+ * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * struct gpio_vbus_mach_info - configuration for gpio_vbus
+ * @gpio_vbus: VBUS sensing GPIO
+ * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
+ * @gpio_vbus_inverted: true if gpio_vbus is active low
+ * @gpio_pullup_inverted: true if gpio_pullup is active low
+ *
+ * The VBUS sensing GPIO should have a pulldown, which will normally be
+ * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
+ * value the GPIO detects as active. Some systems will use comparators.
+ */
+struct gpio_vbus_mach_info {
+ int gpio_vbus;
+ int gpio_pullup;
+ bool gpio_vbus_inverted;
+ bool gpio_pullup_inverted;
+};
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
new file mode 100644
index 0000000..6114850
--- /dev/null
+++ b/include/linux/usb/hcd.h
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_HCD_H
+#define __USB_CORE_HCD_H
+
+#ifdef __KERNEL__
+
+#include <linux/rwsem.h>
+
+#define MAX_TOPO_LEVEL 6
+
+
+#define USB_PID_EXT 0xf0
+#define USB_PID_OUT 0xe1
+#define USB_PID_ACK 0xd2
+#define USB_PID_DATA0 0xc3
+#define USB_PID_PING 0xb4
+#define USB_PID_SOF 0xa5
+#define USB_PID_NYET 0x96
+#define USB_PID_DATA2 0x87
+#define USB_PID_SPLIT 0x78
+#define USB_PID_IN 0x69
+#define USB_PID_NAK 0x5a
+#define USB_PID_DATA1 0x4b
+#define USB_PID_PREAMBLE 0x3c
+#define USB_PID_ERR 0x3c
+#define USB_PID_SETUP 0x2d
+#define USB_PID_STALL 0x1e
+#define USB_PID_MDATA 0x0f
+
+
+
+
+struct usb_hcd {
+
+ struct usb_bus self;
+ struct kref kref;
+
+ const char *product_desc;
+ int speed;
+ char irq_descr[24];
+
+ struct timer_list rh_timer;
+ struct urb *status_urb;
+#ifdef CONFIG_USB_SUSPEND
+ struct work_struct wakeup_work;
+#endif
+
+ const struct hc_driver *driver;
+
+ unsigned long flags;
+#define HCD_FLAG_HW_ACCESSIBLE 0
+#define HCD_FLAG_POLL_RH 2
+#define HCD_FLAG_POLL_PENDING 3
+#define HCD_FLAG_WAKEUP_PENDING 4
+#define HCD_FLAG_RH_RUNNING 5
+#define HCD_FLAG_DEAD 6
+
+#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
+#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
+#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
+#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
+
+
+ unsigned rh_registered:1;
+ unsigned rh_pollable:1;
+ unsigned msix_enabled:1;
+
+ unsigned uses_new_polling:1;
+ unsigned wireless:1;
+ unsigned authorized_default:1;
+ unsigned has_tt:1;
+
+ unsigned int irq;
+ void __iomem *regs;
+ u64 rsrc_start;
+ u64 rsrc_len;
+ unsigned power_budget;
+
+ struct mutex *bandwidth_mutex;
+ struct usb_hcd *shared_hcd;
+ struct usb_hcd *primary_hcd;
+
+ struct work_struct ssr_work;
+#define HCD_BUFFER_POOLS 4
+ struct dma_pool *pool[HCD_BUFFER_POOLS];
+
+ int state;
+# define __ACTIVE 0x01
+# define __SUSPEND 0x04
+# define __TRANSIENT 0x80
+
+# define HC_STATE_HALT 0
+# define HC_STATE_RUNNING (__ACTIVE)
+# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
+# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
+# define HC_STATE_SUSPENDED (__SUSPEND)
+
+#define HC_IS_RUNNING(state) ((state) & __ACTIVE)
+#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
+
+
+ unsigned long hcd_priv[0]
+ __attribute__ ((aligned(sizeof(s64))));
+};
+
+static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
+{
+ return &hcd->self;
+}
+
+static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
+{
+ return container_of(bus, struct usb_hcd, self);
+}
+
+struct hcd_timeout {
+ struct list_head timeout_list;
+ struct timer_list timer;
+};
+
+
+
+struct hc_driver {
+ const char *description;
+ const char *product_desc;
+ size_t hcd_priv_size;
+
+
+ irqreturn_t (*irq) (struct usb_hcd *hcd);
+
+ int flags;
+#define HCD_MEMORY 0x0001
+#define HCD_LOCAL_MEM 0x0002
+#define HCD_SHARED 0x0004
+#define HCD_OLD_ENUM 0x0008
+#define HCD_USB11 0x0010
+#define HCD_USB2 0x0020
+#define HCD_USB3 0x0040
+#define HCD_MASK 0x0070
+
+
+ int (*reset) (struct usb_hcd *hcd);
+ int (*start) (struct usb_hcd *hcd);
+
+
+ int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
+
+
+ int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
+
+
+ void (*stop) (struct usb_hcd *hcd);
+
+
+ void (*shutdown) (struct usb_hcd *hcd);
+
+
+ int (*get_frame_number) (struct usb_hcd *hcd);
+
+
+ int (*urb_enqueue)(struct usb_hcd *hcd,
+ struct urb *urb, gfp_t mem_flags);
+ int (*urb_dequeue)(struct usb_hcd *hcd,
+ struct urb *urb, int status);
+
+ int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+ void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
+
+
+ void (*endpoint_disable)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
+ void (*endpoint_reset)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
+
+ int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
+ int (*hub_control) (struct usb_hcd *hcd,
+ u16 typeReq, u16 wValue, u16 wIndex,
+ char *buf, u16 wLength);
+ int (*bus_suspend)(struct usb_hcd *);
+ int (*bus_resume)(struct usb_hcd *);
+ int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
+
+
+ void (*relinquish_port)(struct usb_hcd *, int);
+
+ int (*port_handed_over)(struct usb_hcd *, int);
+
+
+ void (*clear_tt_buffer_complete)(struct usb_hcd *,
+ struct usb_host_endpoint *);
+
+
+
+ int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
+
+ void (*free_dev)(struct usb_hcd *, struct usb_device *);
+
+ int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags);
+ int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags);
+
+
+
+ int (*add_endpoint)(struct usb_hcd *, struct usb_device *,
+ struct usb_host_endpoint *);
+
+ int (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
+ struct usb_host_endpoint *);
+ int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+
+ int (*address_device)(struct usb_hcd *, struct usb_device *udev);
+ int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
+ struct usb_tt *tt, gfp_t mem_flags);
+ int (*reset_device)(struct usb_hcd *, struct usb_device *);
+ int (*update_device)(struct usb_hcd *, struct usb_device *);
+ int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
+
+
+ void (*log_urb_complete)(struct urb *urb, char * event,
+ unsigned extra);
+ void (*dump_regs)(struct usb_hcd *);
+ void (*dump_qh_qtd)(struct usb_hcd *);
+ void (*enable_ulpi_control)(struct usb_hcd *hcd, u32 linestate);
+ void (*disable_ulpi_control)(struct usb_hcd *hcd);
+};
+
+extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
+extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
+
+extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
+extern int usb_hcd_unlink_urb(struct urb *urb, int status);
+extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_flush_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_disable_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
+extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
+ struct usb_host_config *new_config,
+ struct usb_host_interface *old_alt,
+ struct usb_host_interface *new_alt);
+extern int usb_hcd_get_frame_number(struct usb_device *udev);
+
+extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
+ struct device *dev, const char *bus_name);
+extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+ struct device *dev, const char *bus_name,
+ struct usb_hcd *shared_hcd);
+extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
+extern void usb_put_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
+#ifdef CONFIG_USB
+extern int usb_add_hcd(struct usb_hcd *hcd,
+ unsigned int irqnum, unsigned long irqflags);
+extern void usb_remove_hcd(struct usb_hcd *hcd);
+#else
+static inline int
+usb_add_hcd(struct usb_hcd *hcd, unsigned int irqnum, unsigned long irqflags)
+{
+ return 0;
+}
+static inline void usb_remove_hcd(struct usb_hcd *hcd) {}
+#endif
+
+struct platform_device;
+extern void usb_hcd_platform_shutdown(struct platform_device *dev);
+
+#ifdef CONFIG_PCI
+struct pci_dev;
+struct pci_device_id;
+extern int usb_hcd_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id);
+extern void usb_hcd_pci_remove(struct pci_dev *dev);
+extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+
+#ifdef CONFIG_PM_SLEEP
+extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
+#endif
+#endif
+
+int hcd_buffer_create(struct usb_hcd *hcd);
+void hcd_buffer_destroy(struct usb_hcd *hcd);
+
+void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
+ gfp_t mem_flags, dma_addr_t *dma);
+void hcd_buffer_free(struct usb_bus *bus, size_t size,
+ void *addr, dma_addr_t dma);
+
+extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
+
+extern void usb_hc_died(struct usb_hcd *hcd);
+extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+extern void usb_wakeup_notification(struct usb_device *hdev,
+ unsigned int portnum);
+
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+ ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+ ((bit) << (ep)))
+
+
+extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
+ struct usb_bus *, unsigned port);
+extern int usb_new_device(struct usb_device *dev);
+extern void usb_disconnect(struct usb_device **);
+
+extern int usb_get_configuration(struct usb_device *dev);
+extern void usb_destroy_configuration(struct usb_device *dev);
+
+
+
+#include <linux/usb/ch11.h>
+
+
+struct usb_device;
+
+struct usb_tt {
+ struct usb_device *hub;
+ int multi;
+ unsigned think_time;
+
+
+ spinlock_t lock;
+ struct list_head clear_list;
+ struct work_struct clear_work;
+};
+
+struct usb_tt_clear {
+ struct list_head clear_list;
+ unsigned tt;
+ u16 devinfo;
+ struct usb_hcd *hcd;
+ struct usb_host_endpoint *ep;
+};
+
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
+extern void usb_ep0_reinit(struct usb_device *);
+
+#define DeviceRequest \
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+#define DeviceOutRequest \
+ ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+
+#define InterfaceRequest \
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+#define EndpointRequest \
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+#define EndpointOutRequest \
+ ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
+#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
+#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
+#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
+#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
+#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
+#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
+
+
+
+#define SetHubDepth (0x3000 | HUB_SET_DEPTH)
+#define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT)
+
+#define FRAME_TIME_USECS 1000L
+#define BitTime(bytecount) (7 * 8 * bytecount / 6)
+
+
+#define NS_TO_US(ns) ((ns + 500L) / 1000L)
+
+
+
+#define BW_HOST_DELAY 1000L
+#define BW_HUB_LS_SETUP 333L
+
+
+#define FRAME_TIME_BITS 12000L
+#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
+#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
+
+#define USB2_HOST_DELAY 5
+#define HS_NSECS(bytes) (((55 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ + USB2_HOST_DELAY)
+#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ + USB2_HOST_DELAY)
+#define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes))
+
+extern long usb_calc_bus_time(int speed, int is_input,
+ int isoc, int bytecount);
+
+
+extern void usb_set_device_state(struct usb_device *udev,
+ enum usb_device_state new_state);
+
+
+
+extern struct list_head usb_bus_list;
+extern struct mutex usb_bus_list_lock;
+extern wait_queue_head_t usb_kill_urb_queue;
+
+extern int usb_find_interface_driver(struct usb_device *dev,
+ struct usb_interface *interface);
+
+#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
+
+#ifdef CONFIG_PM
+extern void usb_root_hub_lost_power(struct usb_device *rhdev);
+extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
+extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
+#endif
+
+#ifdef CONFIG_USB_SUSPEND
+extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
+#else
+static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+#endif
+
+
+
+#ifdef CONFIG_USB_DEVICEFS
+
+extern void usbfs_update_special(void);
+extern int usbfs_init(void);
+extern void usbfs_cleanup(void);
+
+#else
+
+static inline void usbfs_update_special(void) {}
+static inline int usbfs_init(void) { return 0; }
+static inline void usbfs_cleanup(void) { }
+
+#endif
+
+
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+
+struct usb_mon_operations {
+ void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
+ void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
+ void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
+
+};
+
+extern struct usb_mon_operations *mon_ops;
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_submit)(bus, urb);
+}
+
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+ int error)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_submit_error)(bus, urb, error);
+}
+
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+ int status)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_complete)(bus, urb, status);
+}
+
+int usb_mon_register(struct usb_mon_operations *ops);
+void usb_mon_deregister(void);
+
+#else
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+ int error) {}
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+ int status) {}
+
+#endif
+
+
+
+#define RUN_CONTEXT (in_irq() ? "in_irq" \
+ : (in_interrupt() ? "in_interrupt" : "can sleep"))
+
+
+extern struct rw_semaphore ehci_cf_port_reset_rwsem;
+
+#define USB_UHCI_LOADED 0
+#define USB_OHCI_LOADED 1
+#define USB_EHCI_LOADED 2
+extern unsigned long usb_hcds_loaded;
+
+#endif
+
+#endif
diff --git a/include/linux/usb/htc_info.h b/include/linux/usb/htc_info.h
new file mode 100644
index 0000000..5646aa6
--- /dev/null
+++ b/include/linux/usb/htc_info.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2011 HTC, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __HTC_INFO__
+#define __HTC_INFO__
+
+#include <mach/board.h>
+struct usb_info {
+ int *phy_init_seq;
+ void (*phy_reset)(void);
+ void (*hw_reset)(bool en);
+ void (*usb_uart_switch)(int);
+ void (*serial_debug_gpios)(int);
+ void (*usb_hub_enable)(bool);
+ int (*china_ac_detect)(void);
+ void (*disable_usb_charger)(void);
+ void (*change_phy_voltage)(int);
+ int (*ldo_init) (int init);
+ int (*ldo_enable) (int enable);
+ void (*usb_mhl_switch)(bool);
+
+
+ int connect_type_ready;
+ void (*usb_connected)(int);
+
+ enum usb_connect_type connect_type;
+ struct delayed_work chg_stop;
+};
+
+extern ssize_t otg_show_usb_phy_setting(char *buf);
+extern ssize_t otg_store_usb_phy_setting(const char *buf, size_t count);
+
+extern int usb_get_connect_type(void);
+extern int android_switch_function(unsigned func);
+extern int android_show_function(char *buf);
+extern void android_set_serialno(char *serialno);
+extern void android_force_reset(void);
+extern int htc_usb_enable_function(char *name, int ebl);
+
+extern void htc_mode_enable(int enable);
+extern int check_htc_mode_status(void);
+extern void android_switch_default(void);
+extern void android_switch_htc_mode(void);
+
+#ifdef err
+#undef err
+#endif
+#ifdef warn
+#undef warn
+#endif
+#ifdef info
+#undef info
+#endif
+
+#define USB_ERR(fmt, args...) \
+ printk(KERN_ERR "[USB:ERR] " fmt, ## args)
+#define USB_WARNING(fmt, args...) \
+ printk(KERN_WARNING "[USB] " fmt, ## args)
+#define USB_INFO(fmt, args...) \
+ printk(KERN_INFO "[USB] " fmt, ## args)
+#define USB_DEBUG(fmt, args...) \
+ printk(KERN_DEBUG "[USB] " fmt, ## args)
+
+#define USBH_ERR(fmt, args...) \
+ printk(KERN_ERR "[USBH:ERR] " fmt, ## args)
+#define USBH_WARNING(fmt, args...) \
+ printk(KERN_WARNING "[USBH] " fmt, ## args)
+#define USBH_INFO(fmt, args...) \
+ printk(KERN_INFO "[USBH] " fmt, ## args)
+#define USBH_DEBUG(fmt, args...) \
+ printk(KERN_DEBUG "[USBH] " fmt, ## args)
+
+#ifdef dev_err
+#undef dev_err
+#endif
+#define dev_err(dev, fmt, args...) \
+ printk(KERN_ERR "[USB] " pr_fmt(fmt), ## args)
+
+#ifdef dev_dbg
+#undef dev_dbg
+#endif
+#define dev_dbg(dev, fmt, args...) \
+ printk(KERN_INFO "[USB] " pr_fmt(fmt), ## args)
+
+#ifdef dev_info
+#undef dev_info
+#endif
+#define dev_info(dev, fmt, args...) \
+ printk(KERN_INFO "[USB] " pr_fmt(fmt), ## args)
+
+#ifdef pr_debug
+#undef pr_debug
+#endif
+#define pr_debug(fmt, args...) \
+ printk(KERN_INFO "[USB] " pr_fmt(fmt), ## args)
+
+#ifdef pr_err
+#undef pr_err
+#endif
+#define pr_err(fmt, args...) \
+ printk(KERN_ERR "[USB] " pr_fmt(fmt), ## args)
+
+#ifdef pr_info
+#undef pr_info
+#endif
+#define pr_info(fmt, args...) \
+ printk(KERN_INFO "[USB] " pr_fmt(fmt), ## args)
+
+#endif
+
diff --git a/include/linux/usb/input.h b/include/linux/usb/input.h
new file mode 100644
index 0000000..320e6e7
--- /dev/null
+++ b/include/linux/usb/input.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2005 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __LINUX_USB_INPUT_H
+#define __LINUX_USB_INPUT_H
+
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <asm/byteorder.h>
+
+static inline void
+usb_to_input_id(const struct usb_device *dev, struct input_id *id)
+{
+ id->bustype = BUS_USB;
+ id->vendor = le16_to_cpu(dev->descriptor.idVendor);
+ id->product = le16_to_cpu(dev->descriptor.idProduct);
+ id->version = le16_to_cpu(dev->descriptor.bcdDevice);
+}
+
+#endif
diff --git a/include/linux/usb/intel_mid_otg.h b/include/linux/usb/intel_mid_otg.h
new file mode 100644
index 0000000..756cf55
--- /dev/null
+++ b/include/linux/usb/intel_mid_otg.h
@@ -0,0 +1,180 @@
+/*
+ * Intel MID (Langwell/Penwell) USB OTG Transceiver driver
+ * Copyright (C) 2008 - 2010, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __INTEL_MID_OTG_H
+#define __INTEL_MID_OTG_H
+
+#include <linux/pm.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+
+struct intel_mid_otg_xceiv;
+
+/* This is a common data structure for Intel MID platform to
+ * save values of the OTG state machine */
+struct otg_hsm {
+ /* Input */
+ int a_bus_resume;
+ int a_bus_suspend;
+ int a_conn;
+ int a_sess_vld;
+ int a_srp_det;
+ int a_vbus_vld;
+ int b_bus_resume;
+ int b_bus_suspend;
+ int b_conn;
+ int b_se0_srp;
+ int b_ssend_srp;
+ int b_sess_end;
+ int b_sess_vld;
+ int id;
+/* id values */
+#define ID_B 0x05
+#define ID_A 0x04
+#define ID_ACA_C 0x03
+#define ID_ACA_B 0x02
+#define ID_ACA_A 0x01
+ int power_up;
+ int adp_change;
+ int test_device;
+
+ /* Internal variables */
+ int a_set_b_hnp_en;
+ int b_srp_done;
+ int b_hnp_enable;
+ int hnp_poll_enable;
+
+ /* Timeout indicator for timers */
+ int a_wait_vrise_tmout;
+ int a_wait_bcon_tmout;
+ int a_aidl_bdis_tmout;
+ int a_bidl_adis_tmout;
+ int a_bidl_adis_tmr;
+ int a_wait_vfall_tmout;
+ int b_ase0_brst_tmout;
+ int b_bus_suspend_tmout;
+ int b_srp_init_tmout;
+ int b_srp_fail_tmout;
+ int b_srp_fail_tmr;
+ int b_adp_sense_tmout;
+
+ /* Informative variables */
+ int a_bus_drop;
+ int a_bus_req;
+ int a_clr_err;
+ int b_bus_req;
+ int a_suspend_req;
+ int b_bus_suspend_vld;
+
+ /* Output */
+ int drv_vbus;
+ int loc_conn;
+ int loc_sof;
+
+ /* Others */
+ int vbus_srp_up;
+};
+
+/* must provide ULPI access function to read/write registers implemented in
+ * ULPI address space */
+struct iotg_ulpi_access_ops {
+ int (*read)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 *val);
+ int (*write)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 val);
+};
+
+#define OTG_A_DEVICE 0x0
+#define OTG_B_DEVICE 0x1
+
+/*
+ * the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact
+ * with device and host drivers to implement the USB OTG related feature. More
+ * function members are added based on usb_phy data structure for this
+ * purpose.
+ */
+struct intel_mid_otg_xceiv {
+ struct usb_phy otg;
+ struct otg_hsm hsm;
+
+ /* base address */
+ void __iomem *base;
+
+ /* ops to access ulpi */
+ struct iotg_ulpi_access_ops ulpi_ops;
+
+ /* atomic notifier for interrupt context */
+ struct atomic_notifier_head iotg_notifier;
+
+ /* start/stop USB Host function */
+ int (*start_host)(struct intel_mid_otg_xceiv *iotg);
+ int (*stop_host)(struct intel_mid_otg_xceiv *iotg);
+
+ /* start/stop USB Peripheral function */
+ int (*start_peripheral)(struct intel_mid_otg_xceiv *iotg);
+ int (*stop_peripheral)(struct intel_mid_otg_xceiv *iotg);
+
+ /* start/stop ADP sense/probe function */
+ int (*set_adp_probe)(struct intel_mid_otg_xceiv *iotg,
+ bool enabled, int dev);
+ int (*set_adp_sense)(struct intel_mid_otg_xceiv *iotg,
+ bool enabled);
+
+#ifdef CONFIG_PM
+ /* suspend/resume USB host function */
+ int (*suspend_host)(struct intel_mid_otg_xceiv *iotg,
+ pm_message_t message);
+ int (*resume_host)(struct intel_mid_otg_xceiv *iotg);
+
+ int (*suspend_peripheral)(struct intel_mid_otg_xceiv *iotg,
+ pm_message_t message);
+ int (*resume_peripheral)(struct intel_mid_otg_xceiv *iotg);
+#endif
+
+};
+static inline
+struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct usb_phy *otg)
+{
+ return container_of(otg, struct intel_mid_otg_xceiv, otg);
+}
+
+#define MID_OTG_NOTIFY_CONNECT 0x0001
+#define MID_OTG_NOTIFY_DISCONN 0x0002
+#define MID_OTG_NOTIFY_HSUSPEND 0x0003
+#define MID_OTG_NOTIFY_HRESUME 0x0004
+#define MID_OTG_NOTIFY_CSUSPEND 0x0005
+#define MID_OTG_NOTIFY_CRESUME 0x0006
+#define MID_OTG_NOTIFY_HOSTADD 0x0007
+#define MID_OTG_NOTIFY_HOSTREMOVE 0x0008
+#define MID_OTG_NOTIFY_CLIENTADD 0x0009
+#define MID_OTG_NOTIFY_CLIENTREMOVE 0x000a
+
+static inline int
+intel_mid_otg_register_notifier(struct intel_mid_otg_xceiv *iotg,
+ struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&iotg->iotg_notifier, nb);
+}
+
+static inline void
+intel_mid_otg_unregister_notifier(struct intel_mid_otg_xceiv *iotg,
+ struct notifier_block *nb)
+{
+ atomic_notifier_chain_unregister(&iotg->iotg_notifier, nb);
+}
+
+#endif /* __INTEL_MID_OTG_H */
diff --git a/include/linux/usb/iowarrior.h b/include/linux/usb/iowarrior.h
new file mode 100644
index 0000000..4fd6513
--- /dev/null
+++ b/include/linux/usb/iowarrior.h
@@ -0,0 +1,42 @@
+#ifndef __LINUX_USB_IOWARRIOR_H
+#define __LINUX_USB_IOWARRIOR_H
+
+#define CODEMERCS_MAGIC_NUMBER 0xC0 /* like COde Mercenaries */
+
+/* Define the ioctl commands for reading and writing data */
+#define IOW_WRITE _IOW(CODEMERCS_MAGIC_NUMBER, 1, __u8 *)
+#define IOW_READ _IOW(CODEMERCS_MAGIC_NUMBER, 2, __u8 *)
+
+/*
+ A struct for available device info which is read
+ with the ioctl IOW_GETINFO.
+ To be compatible with 2.4 userspace which didn't have an easy way to get
+ this information.
+*/
+struct iowarrior_info {
+ /* vendor id : supposed to be USB_VENDOR_ID_CODEMERCS in all cases */
+ __u32 vendor;
+ /* product id : depends on type of chip (USB_DEVICE_ID_CODEMERCS_X) */
+ __u32 product;
+ /* the serial number of our chip (if a serial-number is not available
+ * this is empty string) */
+ __u8 serial[9];
+ /* revision number of the chip */
+ __u32 revision;
+ /* USB-speed of the device (0=UNKNOWN, 1=LOW, 2=FULL 3=HIGH) */
+ __u32 speed;
+ /* power consumption of the device in mA */
+ __u32 power;
+ /* the number of the endpoint */
+ __u32 if_num;
+ /* size of the data-packets on this interface */
+ __u32 report_size;
+};
+
+/*
+ Get some device-information (product-id , serial-number etc.)
+ in order to identify a chip.
+*/
+#define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info)
+
+#endif /* __LINUX_USB_IOWARRIOR_H */
diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h
new file mode 100644
index 0000000..e345cea
--- /dev/null
+++ b/include/linux/usb/irda.h
@@ -0,0 +1,151 @@
+/*
+ * USB IrDA Bridge Device Definition
+ */
+
+#ifndef __LINUX_USB_IRDA_H
+#define __LINUX_USB_IRDA_H
+
+/* This device should use Application-specific class */
+
+#define USB_SUBCLASS_IRDA 0x02
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific requests (bRequest field) */
+
+#define USB_REQ_CS_IRDA_RECEIVING 1
+#define USB_REQ_CS_IRDA_CHECK_MEDIA_BUSY 3
+#define USB_REQ_CS_IRDA_RATE_SNIFF 4
+#define USB_REQ_CS_IRDA_UNICAST_LIST 5
+#define USB_REQ_CS_IRDA_GET_CLASS_DESC 6
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific descriptor */
+
+#define USB_DT_CS_IRDA 0x21
+
+/*-------------------------------------------------------------------------*/
+
+/* Data sizes */
+
+#define USB_IRDA_DS_2048 (1 << 5)
+#define USB_IRDA_DS_1024 (1 << 4)
+#define USB_IRDA_DS_512 (1 << 3)
+#define USB_IRDA_DS_256 (1 << 2)
+#define USB_IRDA_DS_128 (1 << 1)
+#define USB_IRDA_DS_64 (1 << 0)
+
+/* Window sizes */
+
+#define USB_IRDA_WS_7 (1 << 6)
+#define USB_IRDA_WS_6 (1 << 5)
+#define USB_IRDA_WS_5 (1 << 4)
+#define USB_IRDA_WS_4 (1 << 3)
+#define USB_IRDA_WS_3 (1 << 2)
+#define USB_IRDA_WS_2 (1 << 1)
+#define USB_IRDA_WS_1 (1 << 0)
+
+/* Min turnaround times in usecs */
+
+#define USB_IRDA_MTT_0 (1 << 7)
+#define USB_IRDA_MTT_10 (1 << 6)
+#define USB_IRDA_MTT_50 (1 << 5)
+#define USB_IRDA_MTT_100 (1 << 4)
+#define USB_IRDA_MTT_500 (1 << 3)
+#define USB_IRDA_MTT_1000 (1 << 2)
+#define USB_IRDA_MTT_5000 (1 << 1)
+#define USB_IRDA_MTT_10000 (1 << 0)
+
+/* Baud rates */
+
+#define USB_IRDA_BR_4000000 (1 << 8)
+#define USB_IRDA_BR_1152000 (1 << 7)
+#define USB_IRDA_BR_576000 (1 << 6)
+#define USB_IRDA_BR_115200 (1 << 5)
+#define USB_IRDA_BR_57600 (1 << 4)
+#define USB_IRDA_BR_38400 (1 << 3)
+#define USB_IRDA_BR_19200 (1 << 2)
+#define USB_IRDA_BR_9600 (1 << 1)
+#define USB_IRDA_BR_2400 (1 << 0)
+
+/* Additional BOFs */
+
+#define USB_IRDA_AB_0 (1 << 7)
+#define USB_IRDA_AB_1 (1 << 6)
+#define USB_IRDA_AB_2 (1 << 5)
+#define USB_IRDA_AB_3 (1 << 4)
+#define USB_IRDA_AB_6 (1 << 3)
+#define USB_IRDA_AB_12 (1 << 2)
+#define USB_IRDA_AB_24 (1 << 1)
+#define USB_IRDA_AB_48 (1 << 0)
+
+/* IRDA Rate Sniff */
+
+#define USB_IRDA_RATE_SNIFF 1
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_irda_cs_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdSpecRevision;
+ __u8 bmDataSize;
+ __u8 bmWindowSize;
+ __u8 bmMinTurnaroundTime;
+ __le16 wBaudRate;
+ __u8 bmAdditionalBOFs;
+ __u8 bIrdaRateSniff;
+ __u8 bMaxUnicastList;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* Data Format */
+
+#define USB_IRDA_STATUS_MEDIA_BUSY (1 << 7)
+
+/* The following is a 4-bit value used for both
+ * inbound and outbound headers:
+ *
+ * 0 - speed ignored
+ * 1 - 2400 bps
+ * 2 - 9600 bps
+ * 3 - 19200 bps
+ * 4 - 38400 bps
+ * 5 - 57600 bps
+ * 6 - 115200 bps
+ * 7 - 576000 bps
+ * 8 - 1.152 Mbps
+ * 9 - 5 mbps
+ * 10..15 - Reserved
+ */
+#define USB_IRDA_STATUS_LINK_SPEED 0x0f
+
+/* The following is a 4-bit value used only for
+ * outbound header:
+ *
+ * 0 - No change (BOF ignored)
+ * 1 - 48 BOFs
+ * 2 - 24 BOFs
+ * 3 - 12 BOFs
+ * 4 - 6 BOFs
+ * 5 - 3 BOFs
+ * 6 - 2 BOFs
+ * 7 - 1 BOFs
+ * 8 - 0 BOFs
+ * 9..15 - Reserved
+ */
+#define USB_IRDA_EXTRA_BOFS 0xf0
+
+struct usb_irda_inbound_header {
+ __u8 bmStatus;
+};
+
+struct usb_irda_outbound_header {
+ __u8 bmChange;
+};
+
+#endif /* __LINUX_USB_IRDA_H */
+
diff --git a/include/linux/usb/isp116x.h b/include/linux/usb/isp116x.h
new file mode 100644
index 0000000..96ca114
--- /dev/null
+++ b/include/linux/usb/isp116x.h
@@ -0,0 +1,33 @@
+/*
+ * Board initialization code should put one of these into dev->platform_data
+ * and place the isp116x onto platform_bus.
+ */
+
+#ifndef __LINUX_USB_ISP116X_H
+#define __LINUX_USB_ISP116X_H
+
+struct isp116x_platform_data {
+ /* Enable internal resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* On-chip overcurrent detection */
+ unsigned oc_enable:1;
+ /* INT output polarity */
+ unsigned int_act_high:1;
+ /* INT edge or level triggered */
+ unsigned int_edge_triggered:1;
+ /* Enable wakeup by devices on usb bus (e.g. wakeup
+ by attachment/detachment or by device activity
+ such as moving a mouse). When chosen, this option
+ prevents stopping internal clock, increasing
+ thereby power consumption in suspended state. */
+ unsigned remote_wakeup_enable:1;
+ /* Inter-io delay (ns). The chip is picky about access timings; it
+ expects at least:
+ 150ns delay between consecutive accesses to DATA_REG,
+ 300ns delay between access to ADDR_REG and DATA_REG
+ OE, WE MUST NOT be changed during these intervals
+ */
+ void (*delay) (struct device *dev, int delay);
+};
+
+#endif /* __LINUX_USB_ISP116X_H */
diff --git a/include/linux/usb/isp1362.h b/include/linux/usb/isp1362.h
new file mode 100644
index 0000000..642684b
--- /dev/null
+++ b/include/linux/usb/isp1362.h
@@ -0,0 +1,46 @@
+/*
+ * board initialization code should put one of these into dev->platform_data
+ * and place the isp1362 onto platform_bus.
+ */
+
+#ifndef __LINUX_USB_ISP1362_H__
+#define __LINUX_USB_ISP1362_H__
+
+struct isp1362_platform_data {
+ /* Enable internal pulldown resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* Clock cannot be stopped */
+ unsigned clknotstop:1;
+ /* On-chip overcurrent protection */
+ unsigned oc_enable:1;
+ /* INT output polarity */
+ unsigned int_act_high:1;
+ /* INT edge or level triggered */
+ unsigned int_edge_triggered:1;
+ /* DREQ output polarity */
+ unsigned dreq_act_high:1;
+ /* DACK input polarity */
+ unsigned dack_act_high:1;
+ /* chip can be resumed via H_WAKEUP pin */
+ unsigned remote_wakeup_connected:1;
+ /* Switch or not to switch (keep always powered) */
+ unsigned no_power_switching:1;
+ /* Ganged port power switching (0) or individual port power switching (1) */
+ unsigned power_switching_mode:1;
+ /* Given port_power, msec/2 after power on till power good */
+ u8 potpg;
+ /* Hardware reset set/clear */
+ void (*reset) (struct device *dev, int set);
+ /* Clock start/stop */
+ void (*clock) (struct device *dev, int start);
+ /* Inter-io delay (ns). The chip is picky about access timings; it
+ * expects at least:
+ * 110ns delay between consecutive accesses to DATA_REG,
+ * 300ns delay between access to ADDR_REG and DATA_REG (registers)
+ * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory)
+ * WE MUST NOT be activated during these intervals (even without CS!)
+ */
+ void (*delay) (struct device *dev, unsigned int delay);
+};
+
+#endif
diff --git a/include/linux/usb/isp1760.h b/include/linux/usb/isp1760.h
new file mode 100644
index 0000000..de7de53
--- /dev/null
+++ b/include/linux/usb/isp1760.h
@@ -0,0 +1,18 @@
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the isp1760 onto platform_bus named "isp1760-hcd".
+ */
+
+#ifndef __LINUX_USB_ISP1760_H
+#define __LINUX_USB_ISP1760_H
+
+struct isp1760_platform_data {
+ unsigned is_isp1761:1; /* Chip is ISP1761 */
+ unsigned bus_width_16:1; /* 16/32-bit data bus width */
+ unsigned port1_otg:1; /* Port 1 supports OTG */
+ unsigned analog_oc:1; /* Analog overcurrent */
+ unsigned dack_polarity_high:1; /* DACK active high */
+ unsigned dreq_polarity_high:1; /* DREQ active high */
+};
+
+#endif /* __LINUX_USB_ISP1760_H */
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
new file mode 100644
index 0000000..2d2d1bb
--- /dev/null
+++ b/include/linux/usb/langwell_udc.h
@@ -0,0 +1,310 @@
+/*
+ * Intel Langwell USB Device Controller driver
+ * Copyright (C) 2008-2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __LANGWELL_UDC_H
+#define __LANGWELL_UDC_H
+
+
+/* MACRO defines */
+#define CAP_REG_OFFSET 0x0
+#define OP_REG_OFFSET 0x28
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+#define DQH_ALIGNMENT 2048
+#define DTD_ALIGNMENT 64
+#define DMA_BOUNDARY 4096
+
+#define EP0_MAX_PKT_SIZE 64
+#define EP_DIR_IN 1
+#define EP_DIR_OUT 0
+
+#define FLUSH_TIMEOUT 1000
+#define RESET_TIMEOUT 1000
+#define SETUPSTAT_TIMEOUT 100
+#define PRIME_TIMEOUT 100
+
+
+/* device memory space registers */
+
+/* Capability Registers, BAR0 + CAP_REG_OFFSET */
+struct langwell_cap_regs {
+ /* offset: 0x0 */
+ u8 caplength; /* offset of Operational Register */
+ u8 _reserved3;
+ u16 hciversion; /* H: BCD encoding of host version */
+ u32 hcsparams; /* H: host port steering logic capability */
+ u32 hccparams; /* H: host multiple mode control capability */
+#define HCC_LEN BIT(17) /* Link power management (LPM) capability */
+ u8 _reserved4[0x20-0xc];
+ /* offset: 0x20 */
+ u16 dciversion; /* BCD encoding of device version */
+ u8 _reserved5[0x24-0x22];
+ u32 dccparams; /* overall device controller capability */
+#define HOSTCAP BIT(8) /* host capable */
+#define DEVCAP BIT(7) /* device capable */
+#define DEN(d) \
+ (((d)>>0)&0x1f) /* bits 4:0, device endpoint number */
+} __attribute__ ((packed));
+
+
+/* Operational Registers, BAR0 + OP_REG_OFFSET */
+struct langwell_op_regs {
+ /* offset: 0x28 */
+ u32 extsts;
+#define EXTS_TI1 BIT(4) /* general purpose timer interrupt 1 */
+#define EXTS_TI1TI0 BIT(3) /* general purpose timer interrupt 0 */
+#define EXTS_TI1UPI BIT(2) /* USB host periodic interrupt */
+#define EXTS_TI1UAI BIT(1) /* USB host asynchronous interrupt */
+#define EXTS_TI1NAKI BIT(0) /* NAK interrupt */
+ u32 extintr;
+#define EXTI_TIE1 BIT(4) /* general purpose timer interrupt enable 1 */
+#define EXTI_TIE0 BIT(3) /* general purpose timer interrupt enable 0 */
+#define EXTI_UPIE BIT(2) /* USB host periodic interrupt enable */
+#define EXTI_UAIE BIT(1) /* USB host asynchronous interrupt enable */
+#define EXTI_NAKE BIT(0) /* NAK interrupt enable */
+ /* offset: 0x30 */
+ u32 usbcmd;
+#define CMD_HIRD(u) \
+ (((u)>>24)&0xf) /* bits 27:24, host init resume duration */
+#define CMD_ITC(u) \
+ (((u)>>16)&0xff) /* bits 23:16, interrupt threshold control */
+#define CMD_PPE BIT(15) /* per-port change events enable */
+#define CMD_ATDTW BIT(14) /* add dTD tripwire */
+#define CMD_SUTW BIT(13) /* setup tripwire */
+#define CMD_ASPE BIT(11) /* asynchronous schedule park mode enable */
+#define CMD_FS2 BIT(10) /* frame list size */
+#define CMD_ASP1 BIT(9) /* asynchronous schedule park mode count */
+#define CMD_ASP0 BIT(8)
+#define CMD_LR BIT(7) /* light host/device controller reset */
+#define CMD_IAA BIT(6) /* interrupt on async advance doorbell */
+#define CMD_ASE BIT(5) /* asynchronous schedule enable */
+#define CMD_PSE BIT(4) /* periodic schedule enable */
+#define CMD_FS1 BIT(3)
+#define CMD_FS0 BIT(2)
+#define CMD_RST BIT(1) /* controller reset */
+#define CMD_RUNSTOP BIT(0) /* run/stop */
+ u32 usbsts;
+#define STS_PPCI(u) \
+ (((u)>>16)&0xffff) /* bits 31:16, port-n change detect */
+#define STS_AS BIT(15) /* asynchronous schedule status */
+#define STS_PS BIT(14) /* periodic schedule status */
+#define STS_RCL BIT(13) /* reclamation */
+#define STS_HCH BIT(12) /* HC halted */
+#define STS_ULPII BIT(10) /* ULPI interrupt */
+#define STS_SLI BIT(8) /* DC suspend */
+#define STS_SRI BIT(7) /* SOF received */
+#define STS_URI BIT(6) /* USB reset received */
+#define STS_AAI BIT(5) /* interrupt on async advance */
+#define STS_SEI BIT(4) /* system error */
+#define STS_FRI BIT(3) /* frame list rollover */
+#define STS_PCI BIT(2) /* port change detect */
+#define STS_UEI BIT(1) /* USB error interrupt */
+#define STS_UI BIT(0) /* USB interrupt */
+ u32 usbintr;
+/* bits 31:16, per-port interrupt enable */
+#define INTR_PPCE(u) (((u)>>16)&0xffff)
+#define INTR_ULPIE BIT(10) /* ULPI enable */
+#define INTR_SLE BIT(8) /* DC sleep/suspend enable */
+#define INTR_SRE BIT(7) /* SOF received enable */
+#define INTR_URE BIT(6) /* USB reset enable */
+#define INTR_AAE BIT(5) /* interrupt on async advance enable */
+#define INTR_SEE BIT(4) /* system error enable */
+#define INTR_FRE BIT(3) /* frame list rollover enable */
+#define INTR_PCE BIT(2) /* port change detect enable */
+#define INTR_UEE BIT(1) /* USB error interrupt enable */
+#define INTR_UE BIT(0) /* USB interrupt enable */
+ u32 frindex; /* frame index */
+#define FRINDEX_MASK (0x3fff << 0)
+ u32 ctrldssegment; /* not used */
+ u32 deviceaddr;
+#define USBADR_SHIFT 25
+#define USBADR(d) \
+ (((d)>>25)&0x7f) /* bits 31:25, device address */
+#define USBADR_MASK (0x7f << 25)
+#define USBADRA BIT(24) /* device address advance */
+ u32 endpointlistaddr;/* endpoint list top memory address */
+/* bits 31:11, endpoint list pointer */
+#define EPBASE(d) (((d)>>11)&0x1fffff)
+#define ENDPOINTLISTADDR_MASK (0x1fffff << 11)
+ u32 ttctrl; /* H: TT operatin, not used */
+ /* offset: 0x50 */
+ u32 burstsize; /* burst size of data movement */
+#define TXPBURST(b) \
+ (((b)>>8)&0xff) /* bits 15:8, TX burst length */
+#define RXPBURST(b) \
+ (((b)>>0)&0xff) /* bits 7:0, RX burst length */
+ u32 txfilltuning; /* TX tuning */
+ u32 txttfilltuning; /* H: TX TT tuning */
+ u32 ic_usb; /* control the IC_USB FS/LS transceiver */
+ /* offset: 0x60 */
+ u32 ulpi_viewport; /* indirect access to ULPI PHY */
+#define ULPIWU BIT(31) /* ULPI wakeup */
+#define ULPIRUN BIT(30) /* ULPI read/write run */
+#define ULPIRW BIT(29) /* ULPI read/write control */
+#define ULPISS BIT(27) /* ULPI sync state */
+#define ULPIPORT(u) \
+ (((u)>>24)&7) /* bits 26:24, ULPI port number */
+#define ULPIADDR(u) \
+ (((u)>>16)&0xff) /* bits 23:16, ULPI data address */
+#define ULPIDATRD(u) \
+ (((u)>>8)&0xff) /* bits 15:8, ULPI data read */
+#define ULPIDATWR(u) \
+ (((u)>>0)&0xff) /* bits 7:0, ULPI date write */
+ u8 _reserved6[0x70-0x64];
+ /* offset: 0x70 */
+ u32 configflag; /* H: not used */
+ u32 portsc1; /* port status */
+#define DA(p) \
+ (((p)>>25)&0x7f) /* bits 31:25, device address */
+#define PORTS_SSTS (BIT(24) | BIT(23)) /* suspend status */
+#define PORTS_WKOC BIT(22) /* wake on over-current enable */
+#define PORTS_WKDS BIT(21) /* wake on disconnect enable */
+#define PORTS_WKCN BIT(20) /* wake on connect enable */
+#define PORTS_PTC(p) (((p)>>16)&0xf) /* bits 19:16, port test control */
+#define PORTS_PIC (BIT(15) | BIT(14)) /* port indicator control */
+#define PORTS_PO BIT(13) /* port owner */
+#define PORTS_PP BIT(12) /* port power */
+#define PORTS_LS (BIT(11) | BIT(10)) /* line status */
+#define PORTS_SLP BIT(9) /* suspend using L1 */
+#define PORTS_PR BIT(8) /* port reset */
+#define PORTS_SUSP BIT(7) /* suspend */
+#define PORTS_FPR BIT(6) /* force port resume */
+#define PORTS_OCC BIT(5) /* over-current change */
+#define PORTS_OCA BIT(4) /* over-current active */
+#define PORTS_PEC BIT(3) /* port enable/disable change */
+#define PORTS_PE BIT(2) /* port enable/disable */
+#define PORTS_CSC BIT(1) /* connect status change */
+#define PORTS_CCS BIT(0) /* current connect status */
+ u8 _reserved7[0xb4-0x78];
+ /* offset: 0xb4 */
+ u32 devlc; /* control LPM and each USB port behavior */
+/* bits 31:29, parallel transceiver select */
+#define LPM_PTS(d) (((d)>>29)&7)
+#define LPM_STS BIT(28) /* serial transceiver select */
+#define LPM_PTW BIT(27) /* parallel transceiver width */
+#define LPM_PSPD(d) (((d)>>25)&3) /* bits 26:25, port speed */
+#define LPM_PSPD_MASK (BIT(26) | BIT(25))
+#define LPM_SPEED_FULL 0
+#define LPM_SPEED_LOW 1
+#define LPM_SPEED_HIGH 2
+#define LPM_SRT BIT(24) /* shorten reset time */
+#define LPM_PFSC BIT(23) /* port force full speed connect */
+#define LPM_PHCD BIT(22) /* PHY low power suspend clock disable */
+#define LPM_STL BIT(16) /* STALL reply to LPM token */
+#define LPM_BA(d) \
+ (((d)>>1)&0x7ff) /* bits 11:1, BmAttributes */
+#define LPM_NYT_ACK BIT(0) /* NYET/ACK reply to LPM token */
+ u8 _reserved8[0xf4-0xb8];
+ /* offset: 0xf4 */
+ u32 otgsc; /* On-The-Go status and control */
+#define OTGSC_DPIE BIT(30) /* data pulse interrupt enable */
+#define OTGSC_MSE BIT(29) /* 1 ms timer interrupt enable */
+#define OTGSC_BSEIE BIT(28) /* B session end interrupt enable */
+#define OTGSC_BSVIE BIT(27) /* B session valid interrupt enable */
+#define OTGSC_ASVIE BIT(26) /* A session valid interrupt enable */
+#define OTGSC_AVVIE BIT(25) /* A VBUS valid interrupt enable */
+#define OTGSC_IDIE BIT(24) /* USB ID interrupt enable */
+#define OTGSC_DPIS BIT(22) /* data pulse interrupt status */
+#define OTGSC_MSS BIT(21) /* 1 ms timer interrupt status */
+#define OTGSC_BSEIS BIT(20) /* B session end interrupt status */
+#define OTGSC_BSVIS BIT(19) /* B session valid interrupt status */
+#define OTGSC_ASVIS BIT(18) /* A session valid interrupt status */
+#define OTGSC_AVVIS BIT(17) /* A VBUS valid interrupt status */
+#define OTGSC_IDIS BIT(16) /* USB ID interrupt status */
+#define OTGSC_DPS BIT(14) /* data bus pulsing status */
+#define OTGSC_MST BIT(13) /* 1 ms timer toggle */
+#define OTGSC_BSE BIT(12) /* B session end */
+#define OTGSC_BSV BIT(11) /* B session valid */
+#define OTGSC_ASV BIT(10) /* A session valid */
+#define OTGSC_AVV BIT(9) /* A VBUS valid */
+#define OTGSC_USBID BIT(8) /* USB ID */
+#define OTGSC_HABA BIT(7) /* hw assist B-disconnect to A-connect */
+#define OTGSC_HADP BIT(6) /* hw assist data pulse */
+#define OTGSC_IDPU BIT(5) /* ID pullup */
+#define OTGSC_DP BIT(4) /* data pulsing */
+#define OTGSC_OT BIT(3) /* OTG termination */
+#define OTGSC_HAAR BIT(2) /* hw assist auto reset */
+#define OTGSC_VC BIT(1) /* VBUS charge */
+#define OTGSC_VD BIT(0) /* VBUS discharge */
+ u32 usbmode;
+#define MODE_VBPS BIT(5) /* R/W VBUS power select */
+#define MODE_SDIS BIT(4) /* R/W stream disable mode */
+#define MODE_SLOM BIT(3) /* R/W setup lockout mode */
+#define MODE_ENSE BIT(2) /* endian select */
+#define MODE_CM(u) (((u)>>0)&3) /* bits 1:0, controller mode */
+#define MODE_IDLE 0
+#define MODE_DEVICE 2
+#define MODE_HOST 3
+ u8 _reserved9[0x100-0xfc];
+ /* offset: 0x100 */
+ u32 endptnak;
+#define EPTN(e) \
+ (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK */
+#define EPRN(e) \
+ (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK */
+ u32 endptnaken;
+#define EPTNE(e) \
+ (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK enable */
+#define EPRNE(e) \
+ (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK enable */
+ u32 endptsetupstat;
+#define SETUPSTAT_MASK (0xffff << 0) /* bits 15:0 */
+#define EP0SETUPSTAT_MASK 1
+ u32 endptprime;
+/* bits 31:16, prime endpoint transmit buffer */
+#define PETB(e) (((e)>>16)&0xffff)
+/* bits 15:0, prime endpoint receive buffer */
+#define PERB(e) (((e)>>0)&0xffff)
+ /* offset: 0x110 */
+ u32 endptflush;
+/* bits 31:16, flush endpoint transmit buffer */
+#define FETB(e) (((e)>>16)&0xffff)
+/* bits 15:0, flush endpoint receive buffer */
+#define FERB(e) (((e)>>0)&0xffff)
+ u32 endptstat;
+/* bits 31:16, endpoint transmit buffer ready */
+#define ETBR(e) (((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive buffer ready */
+#define ERBR(e) (((e)>>0)&0xffff)
+ u32 endptcomplete;
+/* bits 31:16, endpoint transmit complete event */
+#define ETCE(e) (((e)>>16)&0xffff)
+/* bits 15:0, endpoint receive complete event */
+#define ERCE(e) (((e)>>0)&0xffff)
+ /* offset: 0x11c */
+ u32 endptctrl[16];
+#define EPCTRL_TXE BIT(23) /* TX endpoint enable */
+#define EPCTRL_TXR BIT(22) /* TX data toggle reset */
+#define EPCTRL_TXI BIT(21) /* TX data toggle inhibit */
+#define EPCTRL_TXT(e) (((e)>>18)&3) /* bits 19:18, TX endpoint type */
+#define EPCTRL_TXT_SHIFT 18
+#define EPCTRL_TXD BIT(17) /* TX endpoint data source */
+#define EPCTRL_TXS BIT(16) /* TX endpoint STALL */
+#define EPCTRL_RXE BIT(7) /* RX endpoint enable */
+#define EPCTRL_RXR BIT(6) /* RX data toggle reset */
+#define EPCTRL_RXI BIT(5) /* RX data toggle inhibit */
+#define EPCTRL_RXT(e) (((e)>>2)&3) /* bits 3:2, RX endpoint type */
+#define EPCTRL_RXT_SHIFT 2 /* bits 19:18, TX endpoint type */
+#define EPCTRL_RXD BIT(1) /* RX endpoint data sink */
+#define EPCTRL_RXS BIT(0) /* RX endpoint STALL */
+} __attribute__ ((packed));
+
+#endif /* __LANGWELL_UDC_H */
+
diff --git a/include/linux/usb/m66592.h b/include/linux/usb/m66592.h
new file mode 100644
index 0000000..a4ba31a
--- /dev/null
+++ b/include/linux/usb/m66592.h
@@ -0,0 +1,46 @@
+/*
+ * M66592 driver platform data
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __LINUX_USB_M66592_H
+#define __LINUX_USB_M66592_H
+
+#define M66592_PLATDATA_XTAL_12MHZ 0x01
+#define M66592_PLATDATA_XTAL_24MHZ 0x02
+#define M66592_PLATDATA_XTAL_48MHZ 0x03
+
+struct m66592_platdata {
+ /* one = on chip controller, zero = external controller */
+ unsigned on_chip:1;
+
+ /* one = big endian, zero = little endian */
+ unsigned endian:1;
+
+ /* (external controller only) M66592_PLATDATA_XTAL_nnMHZ */
+ unsigned xtal:2;
+
+ /* (external controller only) one = 3.3V, zero = 1.5V */
+ unsigned vif:1;
+
+ /* (external controller only) set one = WR0_N shorted to WR1_N */
+ unsigned wr0_shorted_to_wr1:1;
+};
+
+#endif /* __LINUX_USB_M66592_H */
+
diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h
new file mode 100644
index 0000000..c8c52e3
--- /dev/null
+++ b/include/linux/usb/midi.h
@@ -0,0 +1,112 @@
+/*
+ * <linux/usb/midi.h> -- USB MIDI definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for MIDI Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/midi10.pdf
+ */
+
+#ifndef __LINUX_USB_MIDI_H
+#define __LINUX_USB_MIDI_H
+
+#include <linux/types.h>
+
+/* A.1 MS Class-Specific Interface Descriptor Subtypes */
+#define USB_MS_HEADER 0x01
+#define USB_MS_MIDI_IN_JACK 0x02
+#define USB_MS_MIDI_OUT_JACK 0x03
+#define USB_MS_ELEMENT 0x04
+
+/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */
+#define USB_MS_GENERAL 0x01
+
+/* A.3 MS MIDI IN and OUT Jack Types */
+#define USB_MS_EMBEDDED 0x01
+#define USB_MS_EXTERNAL 0x02
+
+/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */
+struct usb_ms_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __le16 bcdMSC;
+ __le16 wTotalLength;
+} __attribute__ ((packed));
+
+#define USB_DT_MS_HEADER_SIZE 7
+
+/* 6.1.2.2 MIDI IN Jack Descriptor */
+struct usb_midi_in_jack_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */
+ __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */
+ __u8 bJackID;
+ __u8 iJack;
+} __attribute__ ((packed));
+
+#define USB_DT_MIDI_IN_SIZE 6
+
+struct usb_midi_source_pin {
+ __u8 baSourceID;
+ __u8 baSourcePin;
+} __attribute__ ((packed));
+
+/* 6.1.2.3 MIDI OUT Jack Descriptor */
+struct usb_midi_out_jack_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */
+ __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */
+ __u8 bJackID;
+ __u8 bNrInputPins; /* p */
+ struct usb_midi_source_pin pins[]; /* [p] */
+ /*__u8 iJack; -- omitted due to variable-sized pins[] */
+} __attribute__ ((packed));
+
+#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \
+struct usb_midi_out_jack_descriptor_##p { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bJackType; \
+ __u8 bJackID; \
+ __u8 bNrInputPins; \
+ struct usb_midi_source_pin pins[p]; \
+ __u8 iJack; \
+} __attribute__ ((packed))
+
+/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */
+struct usb_ms_endpoint_descriptor {
+ __u8 bLength; /* 4+n */
+ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
+ __u8 bDescriptorSubtype; /* USB_MS_GENERAL */
+ __u8 bNumEmbMIDIJack; /* n */
+ __u8 baAssocJackID[]; /* [n] */
+} __attribute__ ((packed));
+
+#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n))
+
+/* As above, but more useful for defining your own descriptors: */
+#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \
+struct usb_ms_endpoint_descriptor_##n { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubtype; \
+ __u8 bNumEmbMIDIJack; \
+ __u8 baAssocJackID[n]; \
+} __attribute__ ((packed))
+
+#endif /* __LINUX_USB_MIDI_H */
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
new file mode 100644
index 0000000..1d8704a
--- /dev/null
+++ b/include/linux/usb/msm_hsusb.h
@@ -0,0 +1,272 @@
+/* linux/include/asm-arm/arch-msm/hsusb.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ * Copyright (c) 2009-2012, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HSUSB_H
+#define __ASM_ARCH_MSM_HSUSB_H
+
+#include <linux/types.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/wakelock.h>
+#include <mach/board.h>
+#include <linux/pm_qos.h>
+#include <linux/hrtimer.h>
+
+#define MSM_PIPE_ID_MASK (0x1F)
+#define MSM_TX_PIPE_ID_OFS (16)
+#define MSM_SPS_MODE BIT(5)
+#define MSM_IS_FINITE_TRANSFER BIT(6)
+#define MSM_PRODUCER BIT(7)
+#define MSM_DISABLE_WB BIT(8)
+#define MSM_ETD_IOC BIT(9)
+#define MSM_INTERNAL_MEM BIT(10)
+#define MSM_VENDOR_ID BIT(16)
+
+enum usb_mode_type {
+ USB_NONE = 0,
+ USB_PERIPHERAL,
+ USB_HOST,
+ USB_OTG,
+};
+
+enum otg_control_type {
+ OTG_NO_CONTROL = 0,
+ OTG_PHY_CONTROL,
+ OTG_PMIC_CONTROL,
+ OTG_USER_CONTROL,
+};
+
+enum msm_usb_phy_type {
+ INVALID_PHY = 0,
+ CI_45NM_INTEGRATED_PHY,
+ SNPS_28NM_INTEGRATED_PHY,
+};
+
+#define IDEV_CHG_MAX 1500
+#define IDEV_CHG_MIN 500
+#define IUNIT 100
+
+#define IDEV_ACA_CHG_MAX 1500
+#define IDEV_ACA_CHG_LIMIT 500
+
+enum usb_chg_state {
+ USB_CHG_STATE_UNDEFINED = 0,
+ USB_CHG_STATE_WAIT_FOR_DCD,
+ USB_CHG_STATE_DCD_DONE,
+ USB_CHG_STATE_PRIMARY_DONE,
+ USB_CHG_STATE_SECONDARY_DONE,
+ USB_CHG_STATE_DETECTED,
+};
+
+enum usb_chg_type {
+ USB_INVALID_CHARGER = 0,
+ USB_SDP_CHARGER,
+ USB_DCP_CHARGER,
+ USB_CDP_CHARGER,
+ USB_ACA_A_CHARGER,
+ USB_ACA_B_CHARGER,
+ USB_ACA_C_CHARGER,
+ USB_ACA_DOCK_CHARGER,
+ USB_PROPRIETARY_CHARGER,
+};
+
+enum usb_vdd_type {
+ VDDCX_CORNER = 0,
+ VDDCX,
+ VDD_TYPE_MAX,
+};
+
+enum usb_vdd_value {
+ VDD_NONE = 0,
+ VDD_MIN,
+ VDD_MAX,
+ VDD_VAL_MAX,
+};
+
+#define POWER_COLLAPSE_LDO3V3 (1 << 0)
+#define POWER_COLLAPSE_LDO1V8 (1 << 1)
+struct msm_otg_platform_data {
+ int *phy_init_seq;
+ int (*vbus_power)(bool on);
+ unsigned power_budget;
+ enum usb_mode_type mode;
+ enum otg_control_type otg_control;
+ enum usb_mode_type default_mode;
+ enum msm_usb_phy_type phy_type;
+ void (*setup_gpio)(enum usb_otg_state state);
+ int pmic_id_irq;
+ bool mhl_enable;
+ char *ldo_3v3_name;
+ char *ldo_1v8_name;
+ char *vddcx_name;
+ bool disable_reset_on_disconnect;
+ bool enable_dcd;
+ bool enable_lpm_on_dev_suspend;
+ bool core_clk_always_on_workaround;
+ struct msm_bus_scale_pdata *bus_scale_table;
+ int reset_phy_before_lpm;
+ void (*usb_uart_switch)(int uart);
+ int ldo_power_collapse;
+};
+
+
+#define TA_WAIT_VRISE 100
+#define TA_WAIT_VFALL 500
+
+#ifdef CONFIG_USB_OTG
+
+#define TA_WAIT_BCON -1
+#else
+#define TA_WAIT_BCON -1
+#endif
+
+#define TA_AIDL_BDIS 500
+#define TA_BIDL_ADIS 155
+#define TB_SRP_FAIL 6000
+#define TB_ASE0_BRST 200
+
+#define TB_SRP_INIT 2000
+
+#define TA_TST_MAINT 10100
+#define TB_TST_SRP 3000
+#define TB_TST_CONFIG 300
+
+
+#define A_WAIT_VRISE 0
+#define A_WAIT_VFALL 1
+#define A_WAIT_BCON 2
+#define A_AIDL_BDIS 3
+#define A_BIDL_ADIS 4
+#define B_SRP_FAIL 5
+#define B_ASE0_BRST 6
+#define A_TST_MAINT 7
+#define B_TST_SRP 8
+#define B_TST_CONFIG 9
+
+struct msm_otg {
+ struct usb_phy phy;
+ struct msm_otg_platform_data *pdata;
+ int irq;
+ struct clk *clk;
+ struct clk *pclk;
+ struct clk *phy_reset_clk;
+ struct clk *core_clk;
+ void __iomem *regs;
+#define ID 0
+#define B_SESS_VLD 1
+#define ID_A 2
+#define ID_B 3
+#define ID_C 4
+#define A_BUS_DROP 5
+#define A_BUS_REQ 6
+#define A_SRP_DET 7
+#define A_VBUS_VLD 8
+#define B_CONN 9
+#define ADP_CHANGE 10
+#define POWER_UP 11
+#define A_CLR_ERR 12
+#define A_BUS_RESUME 13
+#define A_BUS_SUSPEND 14
+#define A_CONN 15
+#define B_BUS_REQ 16
+ unsigned long inputs;
+ struct work_struct sm_work;
+ bool sm_work_pending;
+ atomic_t pm_suspended;
+ atomic_t in_lpm;
+ int async_int;
+ unsigned cur_power;
+ struct delayed_work chg_work;
+ struct delayed_work pmic_id_status_work;
+ enum usb_chg_state chg_state;
+ enum usb_chg_type chg_type;
+ u8 dcd_retries;
+ struct wake_lock wlock, usb_otg_wlock;
+ struct wake_lock cable_detect_wlock;
+ struct notifier_block usbdev_nb;
+ unsigned mA_port;
+ struct timer_list id_timer;
+ unsigned long caps;
+ struct msm_xo_voter *xo_handle;
+ uint32_t bus_perf_client;
+#define ALLOW_PHY_POWER_COLLAPSE BIT(0)
+#define ALLOW_PHY_RETENTION BIT(1)
+#define ALLOW_LPM_ON_DEV_SUSPEND BIT(2)
+ unsigned long lpm_flags;
+#define PHY_PWR_COLLAPSED BIT(0)
+#define PHY_RETENTIONED BIT(1)
+#define XO_SHUTDOWN BIT(2)
+ struct work_struct notifier_work;
+ enum usb_connect_type connect_type;
+ int connect_type_ready;
+ struct workqueue_struct *usb_wq;
+ struct delayed_work ac_detect_work;
+ int ac_detect_count;
+ int reset_phy_before_lpm;
+ int reset_counter;
+ unsigned long b_last_se0_sess;
+ unsigned long tmouts;
+ u8 active_tmout;
+ struct hrtimer timer;
+ enum usb_vdd_type vdd_type;
+ struct delayed_work init_work;
+};
+
+struct msm_hsic_host_platform_data {
+ unsigned strobe;
+ unsigned data;
+ struct msm_bus_scale_pdata *bus_scale_table;
+ u32 swfi_latency;
+};
+
+struct msm_usb_host_platform_data {
+ unsigned int power_budget;
+ unsigned int dock_connect_irq;
+};
+
+struct msm_hsic_peripheral_platform_data {
+ bool core_clk_always_on_workaround;
+};
+
+struct usb_bam_pipe_connect {
+ u32 src_phy_addr;
+ int src_pipe_index;
+ u32 dst_phy_addr;
+ int dst_pipe_index;
+ u32 data_fifo_base_offset;
+ u32 data_fifo_size;
+ u32 desc_fifo_base_offset;
+ u32 desc_fifo_size;
+};
+
+struct msm_usb_bam_platform_data {
+ struct usb_bam_pipe_connect *connections;
+ int usb_active_bam;
+ int usb_bam_num_pipes;
+};
+
+enum usb_bam {
+ HSUSB_BAM = 0,
+ HSIC_BAM,
+};
+
+int msm_ep_config(struct usb_ep *ep);
+int msm_ep_unconfig(struct usb_ep *ep);
+int msm_data_fifo_config(struct usb_ep *ep, u32 addr, u32 size);
+
+#endif
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
new file mode 100644
index 0000000..8378fa9
--- /dev/null
+++ b/include/linux/usb/msm_hsusb_hw.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
+#define __LINUX_USB_GADGET_MSM72K_UDC_H__
+
+#define USB_AHBBURST (MSM_USB_BASE + 0x0090)
+#define USB_AHBMODE (MSM_USB_BASE + 0x0098)
+#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100)
+#define USB_HS_GPTIMER_BASE (MSM_USB_BASE + 0x80)
+
+#define USB_USBCMD (MSM_USB_BASE + 0x0140)
+#define USB_USBSTS (MSM_USB_BASE + 0x0144)
+#define USB_PORTSC (MSM_USB_BASE + 0x0184)
+#define USB_OTGSC (MSM_USB_BASE + 0x01A4)
+#define USB_USBMODE (MSM_USB_BASE + 0x01A8)
+#define USB_PHY_CTRL (MSM_USB_BASE + 0x0240)
+
+#define USBCMD_RESET 2
+#define USB_USBINTR (MSM_USB_BASE + 0x0148)
+
+#define PORTSC_LS (3 << 10)
+#define PORTSC_PHCD (1 << 23)
+#define PORTSC_PTS_MASK (3 << 30)
+#define PORTSC_PTS_ULPI (3 << 30)
+#define PORTSC_LS (3 << 10)
+#define PORTSC_LS_DM (1 << 10)
+#define PORTSC_CSC (1 << 1)
+#define PORTSC_CCS (1 << 0)
+
+#define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170)
+#define ULPI_RUN (1 << 30)
+#define ULPI_WRITE (1 << 29)
+#define ULPI_READ (0 << 29)
+#define ULPI_SYNC_STATE (1 << 27)
+#define ULPI_ADDR(n) (((n) & 255) << 16)
+#define ULPI_DATA(n) ((n) & 255)
+#define ULPI_DATA_READ(n) (((n) >> 8) & 255)
+
+#define ULPI_PWR_CLK_MNG_REG 0x88
+#define OTG_COMP_DISABLE BIT(0)
+
+#define PHY_ALT_INT (1 << 28)
+#define ASYNC_INTR_CTRL (1 << 29)
+#define ULPI_STP_CTRL (1 << 30)
+#define PHY_RETEN (1 << 1)
+#define PHY_IDHV_INTEN (1 << 8)
+#define PHY_OTGSESSVLDHV_INTEN (1 << 9)
+
+#define STS_PCI (1 << 2)
+#define STS_URI (1 << 6)
+#define STS_SLI (1 << 8)
+
+#define OTGSC_INTSTS_MASK (0x7f << 16)
+#define OTGSC_IDPU (1 << 5)
+#define OTGSC_INTR_MASK (0x7f << 24)
+#define OTGSC_HADP (1 << 6)
+#define OTGSC_ID (1 << 8)
+#define OTGSC_BSV (1 << 11)
+#define OTGSC_IDIS (1 << 16)
+#define OTGSC_BSVIS (1 << 19)
+#define OTGSC_IDIE (1 << 24)
+#define OTGSC_BSVIE (1 << 27)
+#define OTGSC_DPIE (1 << 30)
+#define OTGSC_DPIS (1 << 22)
+
+#define OTG_USBSTS_MASK (STS_PCI | STS_URI | STS_SLI | PHY_ALT_INT)
+#define OTG_OTGSTS_MASK (OTGSC_IDIS | OTGSC_BSVIS | OTGSC_DPIS)
+
+#endif
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
new file mode 100644
index 0000000..eb50525
--- /dev/null
+++ b/include/linux/usb/musb.h
@@ -0,0 +1,152 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers: (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb-hdrc". It encapsulates
+ * key configuration differences between boards.
+ */
+
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed. (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+ MUSB_UNDEFINED = 0,
+ MUSB_HOST, /* A or Mini-A connector */
+ MUSB_PERIPHERAL, /* B or Mini-B connector */
+ MUSB_OTG /* Mini-AB connector */
+};
+
+struct clk;
+
+enum musb_fifo_style {
+ FIFO_RXTX,
+ FIFO_TX,
+ FIFO_RX
+} __attribute__ ((packed));
+
+enum musb_buf_mode {
+ BUF_SINGLE,
+ BUF_DOUBLE
+} __attribute__ ((packed));
+
+struct musb_fifo_cfg {
+ u8 hw_ep_num;
+ enum musb_fifo_style style;
+ enum musb_buf_mode mode;
+ u16 maxpacket;
+};
+
+#define MUSB_EP_FIFO(ep, st, m, pkt) \
+{ \
+ .hw_ep_num = ep, \
+ .style = st, \
+ .mode = m, \
+ .maxpacket = pkt, \
+}
+
+#define MUSB_EP_FIFO_SINGLE(ep, st, pkt) \
+ MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
+
+#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt) \
+ MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
+
+struct musb_hdrc_eps_bits {
+ const char name[16];
+ u8 bits;
+};
+
+struct musb_hdrc_config {
+ struct musb_fifo_cfg *fifo_cfg; /* board fifo configuration */
+ unsigned fifo_cfg_size; /* size of the fifo configuration */
+
+ /* MUSB configuration-specific details */
+ unsigned multipoint:1; /* multipoint device */
+ unsigned dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
+ unsigned soft_con:1 __deprecated; /* soft connect required */
+ unsigned utm_16:1 __deprecated; /* utm data witdh is 16 bits */
+ unsigned big_endian:1; /* true if CPU uses big-endian */
+ unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */
+ unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */
+ unsigned high_iso_tx:1; /* Tx ep required for HB iso */
+ unsigned high_iso_rx:1; /* Rx ep required for HD iso */
+ unsigned dma:1 __deprecated; /* supports DMA */
+ unsigned vendor_req:1 __deprecated; /* vendor registers required */
+
+ u8 num_eps; /* number of endpoints _with_ ep0 */
+ u8 dma_channels __deprecated; /* number of dma channels */
+ u8 dyn_fifo_size; /* dynamic size in bytes */
+ u8 vendor_ctrl __deprecated; /* vendor control reg width */
+ u8 vendor_stat __deprecated; /* vendor status reg witdh */
+ u8 dma_req_chan __deprecated; /* bitmask for required dma channels */
+ u8 ram_bits; /* ram address size */
+
+ struct musb_hdrc_eps_bits *eps_bits __deprecated;
+#ifdef CONFIG_BLACKFIN
+ /* A GPIO controlling VRSEL in Blackfin */
+ unsigned int gpio_vrsel;
+ unsigned int gpio_vrsel_active;
+ /* musb CLKIN in Blackfin in MHZ */
+ unsigned char clkin;
+#endif
+
+};
+
+struct musb_hdrc_platform_data {
+ /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+ u8 mode;
+
+ /* for clk_get() */
+ const char *clock;
+
+ /* (HOST or OTG) switch VBUS on/off */
+ int (*set_vbus)(struct device *dev, int is_on);
+
+ /* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+ u8 power;
+
+ /* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+ u8 min_power;
+
+ /* (HOST or OTG) msec/2 after VBUS on till power good */
+ u8 potpgt;
+
+ /* (HOST or OTG) program PHY for external Vbus */
+ unsigned extvbus:1;
+
+ /* Power the device on or off */
+ int (*set_power)(int state);
+
+ /* MUSB configuration-specific details */
+ struct musb_hdrc_config *config;
+
+ /* Architecture specific board data */
+ void *board_data;
+
+ /* Platform specific struct musb_ops pointer */
+ const void *platform_ops;
+};
+
+
+/* TUSB 6010 support */
+
+#define TUSB6010_OSCCLK_60 16667 /* psec/clk @ 60.0 MHz */
+#define TUSB6010_REFCLK_24 41667 /* psec/clk @ 24.0 MHz XI */
+#define TUSB6010_REFCLK_19 52083 /* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+ struct musb_hdrc_platform_data *data,
+ unsigned ps_refclk, unsigned waitpin,
+ unsigned async_cs, unsigned sync_cs,
+ unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif /* OMAP2 */
+
+#endif /* __LINUX_USB_MUSB_H */
diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h
new file mode 100644
index 0000000..148b8fa
--- /dev/null
+++ b/include/linux/usb/net2280.h
@@ -0,0 +1,443 @@
+/*
+ * NetChip 2280 high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ *
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_NET2280_H
+#define __LINUX_USB_NET2280_H
+
+/*-------------------------------------------------------------------------*/
+
+/* NET2280 MEMORY MAPPED REGISTERS
+ *
+ * The register layout came from the chip documentation, and the bit
+ * number definitions were extracted from chip specification.
+ *
+ * Use the shift operator ('<<') to build bit masks, with readl/writel
+ * to access the registers through PCI.
+ */
+
+/* main registers, BAR0 + 0x0000 */
+struct net2280_regs {
+ /* offset 0x0000 */
+ u32 devinit;
+#define LOCAL_CLOCK_FREQUENCY 8
+#define FORCE_PCI_RESET 7
+#define PCI_ID 6
+#define PCI_ENABLE 5
+#define FIFO_SOFT_RESET 4
+#define CFG_SOFT_RESET 3
+#define PCI_SOFT_RESET 2
+#define USB_SOFT_RESET 1
+#define M8051_RESET 0
+ u32 eectl;
+#define EEPROM_ADDRESS_WIDTH 23
+#define EEPROM_CHIP_SELECT_ACTIVE 22
+#define EEPROM_PRESENT 21
+#define EEPROM_VALID 20
+#define EEPROM_BUSY 19
+#define EEPROM_CHIP_SELECT_ENABLE 18
+#define EEPROM_BYTE_READ_START 17
+#define EEPROM_BYTE_WRITE_START 16
+#define EEPROM_READ_DATA 8
+#define EEPROM_WRITE_DATA 0
+ u32 eeclkfreq;
+ u32 _unused0;
+ /* offset 0x0010 */
+
+ u32 pciirqenb0; /* interrupt PCI master ... */
+#define SETUP_PACKET_INTERRUPT_ENABLE 7
+#define ENDPOINT_F_INTERRUPT_ENABLE 6
+#define ENDPOINT_E_INTERRUPT_ENABLE 5
+#define ENDPOINT_D_INTERRUPT_ENABLE 4
+#define ENDPOINT_C_INTERRUPT_ENABLE 3
+#define ENDPOINT_B_INTERRUPT_ENABLE 2
+#define ENDPOINT_A_INTERRUPT_ENABLE 1
+#define ENDPOINT_0_INTERRUPT_ENABLE 0
+ u32 pciirqenb1;
+#define PCI_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+ u32 cpu_irqenb0; /* ... or onboard 8051 */
+#define SETUP_PACKET_INTERRUPT_ENABLE 7
+#define ENDPOINT_F_INTERRUPT_ENABLE 6
+#define ENDPOINT_E_INTERRUPT_ENABLE 5
+#define ENDPOINT_D_INTERRUPT_ENABLE 4
+#define ENDPOINT_C_INTERRUPT_ENABLE 3
+#define ENDPOINT_B_INTERRUPT_ENABLE 2
+#define ENDPOINT_A_INTERRUPT_ENABLE 1
+#define ENDPOINT_0_INTERRUPT_ENABLE 0
+ u32 cpu_irqenb1;
+#define CPU_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_INTA_INTERRUPT_ENABLE 24
+#define PCI_PME_INTERRUPT_ENABLE 23
+#define PCI_SERR_INTERRUPT_ENABLE 22
+#define PCI_PERR_INTERRUPT_ENABLE 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+
+ /* offset 0x0020 */
+ u32 _unused1;
+ u32 usbirqenb1;
+#define USB_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_INTA_INTERRUPT_ENABLE 24
+#define PCI_PME_INTERRUPT_ENABLE 23
+#define PCI_SERR_INTERRUPT_ENABLE 22
+#define PCI_PERR_INTERRUPT_ENABLE 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+ u32 irqstat0;
+#define INTA_ASSERTED 12
+#define SETUP_PACKET_INTERRUPT 7
+#define ENDPOINT_F_INTERRUPT 6
+#define ENDPOINT_E_INTERRUPT 5
+#define ENDPOINT_D_INTERRUPT 4
+#define ENDPOINT_C_INTERRUPT 3
+#define ENDPOINT_B_INTERRUPT 2
+#define ENDPOINT_A_INTERRUPT 1
+#define ENDPOINT_0_INTERRUPT 0
+ u32 irqstat1;
+#define POWER_STATE_CHANGE_INTERRUPT 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT 26
+#define PCI_PARITY_ERROR_INTERRUPT 25
+#define PCI_INTA_INTERRUPT 24
+#define PCI_PME_INTERRUPT 23
+#define PCI_SERR_INTERRUPT 22
+#define PCI_PERR_INTERRUPT 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19
+#define PCI_RETRY_ABORT_INTERRUPT 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16
+#define SOF_DOWN_INTERRUPT 14
+#define GPIO_INTERRUPT 13
+#define DMA_D_INTERRUPT 12
+#define DMA_C_INTERRUPT 11
+#define DMA_B_INTERRUPT 10
+#define DMA_A_INTERRUPT 9
+#define EEPROM_DONE_INTERRUPT 8
+#define VBUS_INTERRUPT 7
+#define CONTROL_STATUS_INTERRUPT 6
+#define ROOT_PORT_RESET_INTERRUPT 4
+#define SUSPEND_REQUEST_INTERRUPT 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2
+#define RESUME_INTERRUPT 1
+#define SOF_INTERRUPT 0
+ /* offset 0x0030 */
+ u32 idxaddr;
+ u32 idxdata;
+ u32 fifoctl;
+#define PCI_BASE2_RANGE 16
+#define IGNORE_FIFO_AVAILABILITY 3
+#define PCI_BASE2_SELECT 2
+#define FIFO_CONFIGURATION_SELECT 0
+ u32 _unused2;
+ /* offset 0x0040 */
+ u32 memaddr;
+#define START 28
+#define DIRECTION 27
+#define FIFO_DIAGNOSTIC_SELECT 24
+#define MEMORY_ADDRESS 0
+ u32 memdata0;
+ u32 memdata1;
+ u32 _unused3;
+ /* offset 0x0050 */
+ u32 gpioctl;
+#define GPIO3_LED_SELECT 12
+#define GPIO3_INTERRUPT_ENABLE 11
+#define GPIO2_INTERRUPT_ENABLE 10
+#define GPIO1_INTERRUPT_ENABLE 9
+#define GPIO0_INTERRUPT_ENABLE 8
+#define GPIO3_OUTPUT_ENABLE 7
+#define GPIO2_OUTPUT_ENABLE 6
+#define GPIO1_OUTPUT_ENABLE 5
+#define GPIO0_OUTPUT_ENABLE 4
+#define GPIO3_DATA 3
+#define GPIO2_DATA 2
+#define GPIO1_DATA 1
+#define GPIO0_DATA 0
+ u32 gpiostat;
+#define GPIO3_INTERRUPT 3
+#define GPIO2_INTERRUPT 2
+#define GPIO1_INTERRUPT 1
+#define GPIO0_INTERRUPT 0
+} __attribute__ ((packed));
+
+/* usb control, BAR0 + 0x0080 */
+struct net2280_usb_regs {
+ /* offset 0x0080 */
+ u32 stdrsp;
+#define STALL_UNSUPPORTED_REQUESTS 31
+#define SET_TEST_MODE 16
+#define GET_OTHER_SPEED_CONFIGURATION 15
+#define GET_DEVICE_QUALIFIER 14
+#define SET_ADDRESS 13
+#define ENDPOINT_SET_CLEAR_HALT 12
+#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11
+#define GET_STRING_DESCRIPTOR_2 10
+#define GET_STRING_DESCRIPTOR_1 9
+#define GET_STRING_DESCRIPTOR_0 8
+#define GET_SET_INTERFACE 6
+#define GET_SET_CONFIGURATION 5
+#define GET_CONFIGURATION_DESCRIPTOR 4
+#define GET_DEVICE_DESCRIPTOR 3
+#define GET_ENDPOINT_STATUS 2
+#define GET_INTERFACE_STATUS 1
+#define GET_DEVICE_STATUS 0
+ u32 prodvendid;
+#define PRODUCT_ID 16
+#define VENDOR_ID 0
+ u32 relnum;
+ u32 usbctl;
+#define SERIAL_NUMBER_INDEX 16
+#define PRODUCT_ID_STRING_ENABLE 13
+#define VENDOR_ID_STRING_ENABLE 12
+#define USB_ROOT_PORT_WAKEUP_ENABLE 11
+#define VBUS_PIN 10
+#define TIMED_DISCONNECT 9
+#define SUSPEND_IMMEDIATELY 7
+#define SELF_POWERED_USB_DEVICE 6
+#define REMOTE_WAKEUP_SUPPORT 5
+#define PME_POLARITY 4
+#define USB_DETECT_ENABLE 3
+#define PME_WAKEUP_ENABLE 2
+#define DEVICE_REMOTE_WAKEUP_ENABLE 1
+#define SELF_POWERED_STATUS 0
+ /* offset 0x0090 */
+ u32 usbstat;
+#define HIGH_SPEED 7
+#define FULL_SPEED 6
+#define GENERATE_RESUME 5
+#define GENERATE_DEVICE_REMOTE_WAKEUP 4
+ u32 xcvrdiag;
+#define FORCE_HIGH_SPEED_MODE 31
+#define FORCE_FULL_SPEED_MODE 30
+#define USB_TEST_MODE 24
+#define LINE_STATE 16
+#define TRANSCEIVER_OPERATION_MODE 2
+#define TRANSCEIVER_SELECT 1
+#define TERMINATION_SELECT 0
+ u32 setup0123;
+ u32 setup4567;
+ /* offset 0x0090 */
+ u32 _unused0;
+ u32 ouraddr;
+#define FORCE_IMMEDIATE 7
+#define OUR_USB_ADDRESS 0
+ u32 ourconfig;
+} __attribute__ ((packed));
+
+/* pci control, BAR0 + 0x0100 */
+struct net2280_pci_regs {
+ /* offset 0x0100 */
+ u32 pcimstctl;
+#define PCI_ARBITER_PARK_SELECT 13
+#define PCI_MULTI LEVEL_ARBITER 12
+#define PCI_RETRY_ABORT_ENABLE 11
+#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10
+#define DMA_READ_MULTIPLE_ENABLE 9
+#define DMA_READ_LINE_ENABLE 8
+#define PCI_MASTER_COMMAND_SELECT 6
+#define MEM_READ_OR_WRITE 0
+#define IO_READ_OR_WRITE 1
+#define CFG_READ_OR_WRITE 2
+#define PCI_MASTER_START 5
+#define PCI_MASTER_READ_WRITE 4
+#define PCI_MASTER_WRITE 0
+#define PCI_MASTER_READ 1
+#define PCI_MASTER_BYTE_WRITE_ENABLES 0
+ u32 pcimstaddr;
+ u32 pcimstdata;
+ u32 pcimststat;
+#define PCI_ARBITER_CLEAR 2
+#define PCI_EXTERNAL_ARBITER 1
+#define PCI_HOST_MODE 0
+} __attribute__ ((packed));
+
+/* dma control, BAR0 + 0x0180 ... array of four structs like this,
+ * for channels 0..3. see also struct net2280_dma: descriptor
+ * that can be loaded into some of these registers.
+ */
+struct net2280_dma_regs { /* [11.7] */
+ /* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */
+ u32 dmactl;
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25
+#define DMA_CLEAR_COUNT_ENABLE 21
+#define DESCRIPTOR_POLLING_RATE 19
+#define POLL_CONTINUOUS 0
+#define POLL_1_USEC 1
+#define POLL_100_USEC 2
+#define POLL_1_MSEC 3
+#define DMA_VALID_BIT_POLLING_ENABLE 18
+#define DMA_VALID_BIT_ENABLE 17
+#define DMA_SCATTER_GATHER_ENABLE 16
+#define DMA_OUT_AUTO_START_ENABLE 4
+#define DMA_PREEMPT_ENABLE 3
+#define DMA_FIFO_VALIDATE 2
+#define DMA_ENABLE 1
+#define DMA_ADDRESS_HOLD 0
+ u32 dmastat;
+#define DMA_ABORT_DONE_INTERRUPT 27
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25
+#define DMA_TRANSACTION_DONE_INTERRUPT 24
+#define DMA_ABORT 1
+#define DMA_START 0
+ u32 _unused0[2];
+ /* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */
+ u32 dmacount;
+#define VALID_BIT 31
+#define DMA_DIRECTION 30
+#define DMA_DONE_INTERRUPT_ENABLE 29
+#define END_OF_CHAIN 28
+#define DMA_BYTE_COUNT_MASK ((1<<24)-1)
+#define DMA_BYTE_COUNT 0
+ u32 dmaaddr;
+ u32 dmadesc;
+ u32 _unused1;
+} __attribute__ ((packed));
+
+/* dedicated endpoint registers, BAR0 + 0x0200 */
+
+struct net2280_dep_regs { /* [11.8] */
+ /* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */
+ u32 dep_cfg;
+ /* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */
+ u32 dep_rsp;
+ u32 _unused[2];
+} __attribute__ ((packed));
+
+/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
+ * like this, for ep0 then the configurable endpoints A..F
+ * ep0 reserved for control; E and F have only 64 bytes of fifo
+ */
+struct net2280_ep_regs { /* [11.9] */
+ /* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */
+ u32 ep_cfg;
+#define ENDPOINT_BYTE_COUNT 16
+#define ENDPOINT_ENABLE 10
+#define ENDPOINT_TYPE 8
+#define ENDPOINT_DIRECTION 7
+#define ENDPOINT_NUMBER 0
+ u32 ep_rsp;
+#define SET_NAK_OUT_PACKETS 15
+#define SET_EP_HIDE_STATUS_PHASE 14
+#define SET_EP_FORCE_CRC_ERROR 13
+#define SET_INTERRUPT_MODE 12
+#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11
+#define SET_NAK_OUT_PACKETS_MODE 10
+#define SET_ENDPOINT_TOGGLE 9
+#define SET_ENDPOINT_HALT 8
+#define CLEAR_NAK_OUT_PACKETS 7
+#define CLEAR_EP_HIDE_STATUS_PHASE 6
+#define CLEAR_EP_FORCE_CRC_ERROR 5
+#define CLEAR_INTERRUPT_MODE 4
+#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3
+#define CLEAR_NAK_OUT_PACKETS_MODE 2
+#define CLEAR_ENDPOINT_TOGGLE 1
+#define CLEAR_ENDPOINT_HALT 0
+ u32 ep_irqenb;
+#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5
+#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2
+#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1
+#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0
+ u32 ep_stat;
+#define FIFO_VALID_COUNT 24
+#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22
+#define TIMEOUT 21
+#define USB_STALL_SENT 20
+#define USB_IN_NAK_SENT 19
+#define USB_IN_ACK_RCVD 18
+#define USB_OUT_PING_NAK_SENT 17
+#define USB_OUT_ACK_SENT 16
+#define FIFO_OVERFLOW 13
+#define FIFO_UNDERFLOW 12
+#define FIFO_FULL 11
+#define FIFO_EMPTY 10
+#define FIFO_FLUSH 9
+#define SHORT_PACKET_OUT_DONE_INTERRUPT 6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5
+#define NAK_OUT_PACKETS 4
+#define DATA_PACKET_RECEIVED_INTERRUPT 3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT 2
+#define DATA_OUT_PING_TOKEN_INTERRUPT 1
+#define DATA_IN_TOKEN_INTERRUPT 0
+ /* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */
+ u32 ep_avail;
+ u32 ep_data;
+ u32 _unused0[2];
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_NET2280_H */
diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h
new file mode 100644
index 0000000..2808f2a
--- /dev/null
+++ b/include/linux/usb/ohci_pdriver.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_OHCI_PDRIVER_H
+#define __USB_CORE_OHCI_PDRIVER_H
+
+/**
+ * struct usb_ohci_pdata - platform_data for generic ohci driver
+ *
+ * @big_endian_desc: BE descriptors
+ * @big_endian_mmio: BE registers
+ * @no_big_frame_no: no big endian frame_no shift
+ *
+ * These are general configuration options for the OHCI controller. All of
+ * these options are activating more or less workarounds for some hardware.
+ */
+struct usb_ohci_pdata {
+ unsigned big_endian_desc:1;
+ unsigned big_endian_mmio:1;
+ unsigned no_big_frame_no:1;
+};
+
+#endif /* __USB_CORE_OHCI_PDRIVER_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
new file mode 100644
index 0000000..2749fe0
--- /dev/null
+++ b/include/linux/usb/otg.h
@@ -0,0 +1,272 @@
+
+#ifndef __LINUX_USB_OTG_H
+#define __LINUX_USB_OTG_H
+
+#include <linux/notifier.h>
+
+enum usb_otg_state {
+ OTG_STATE_UNDEFINED = 0,
+
+
+ OTG_STATE_B_IDLE,
+ OTG_STATE_B_SRP_INIT,
+ OTG_STATE_B_PERIPHERAL,
+
+
+ OTG_STATE_B_WAIT_ACON,
+ OTG_STATE_B_HOST,
+
+
+ OTG_STATE_A_IDLE,
+ OTG_STATE_A_WAIT_VRISE,
+ OTG_STATE_A_WAIT_BCON,
+ OTG_STATE_A_HOST,
+ OTG_STATE_A_SUSPEND,
+ OTG_STATE_A_PERIPHERAL,
+ OTG_STATE_A_WAIT_VFALL,
+ OTG_STATE_A_VBUS_ERR,
+};
+
+enum usb_otg_event {
+ OTG_EVENT_DEV_CONN_TMOUT,
+ OTG_EVENT_NO_RESP_FOR_HNP_ENABLE,
+ OTG_EVENT_HUB_NOT_SUPPORTED,
+ OTG_EVENT_DEV_NOT_SUPPORTED,
+ OTG_EVENT_HNP_FAILED,
+ OTG_EVENT_NO_RESP_FOR_SRP,
+ OTG_EVENT_INSUFFICIENT_POWER,
+};
+
+enum usb_phy_events {
+ USB_EVENT_NONE,
+ USB_EVENT_VBUS,
+ USB_EVENT_ID,
+ USB_EVENT_CHARGER,
+ USB_EVENT_ENUMERATED,
+};
+
+struct usb_phy;
+
+struct usb_phy_io_ops {
+ int (*read)(struct usb_phy *x, u32 reg);
+ int (*write)(struct usb_phy *x, u32 val, u32 reg);
+};
+
+struct usb_otg {
+ u8 default_a;
+
+ struct usb_phy *phy;
+ struct usb_bus *host;
+ struct usb_gadget *gadget;
+
+
+ int (*set_host)(struct usb_otg *otg, struct usb_bus *host);
+
+
+ int (*set_peripheral)(struct usb_otg *otg,
+ struct usb_gadget *gadget);
+
+
+ int (*set_vbus)(struct usb_otg *otg, bool enabled);
+
+
+ int (*start_srp)(struct usb_otg *otg);
+
+
+ int (*start_hnp)(struct usb_otg *otg);
+
+
+ int (*send_event)(struct usb_otg *otg,
+ enum usb_otg_event event);
+
+};
+
+struct usb_phy {
+ struct device *dev;
+ const char *label;
+ unsigned int flags;
+
+ enum usb_otg_state state;
+ enum usb_phy_events last_event;
+
+ struct usb_otg *otg;
+
+ struct device *io_dev;
+ struct usb_phy_io_ops *io_ops;
+ void __iomem *io_priv;
+
+
+ struct atomic_notifier_head notifier;
+
+
+ u16 port_status;
+ u16 port_change;
+
+
+ int (*init)(struct usb_phy *x);
+ void (*shutdown)(struct usb_phy *x);
+
+
+ int (*set_power)(struct usb_phy *x,
+ unsigned mA);
+
+
+ int (*set_suspend)(struct usb_phy *x,
+ int suspend);
+
+
+ int (*send_event)(struct usb_phy *phy,
+ enum usb_otg_event event);
+
+ void (*notify_usb_attached)(void);
+
+};
+
+
+extern int usb_set_transceiver(struct usb_phy *);
+
+#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
+extern void usb_nop_xceiv_register(void);
+extern void usb_nop_xceiv_unregister(void);
+#else
+static inline void usb_nop_xceiv_register(void)
+{
+}
+
+static inline void usb_nop_xceiv_unregister(void)
+{
+}
+#endif
+
+static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
+{
+ if (x->io_ops && x->io_ops->read)
+ return x->io_ops->read(x, reg);
+
+ return -EINVAL;
+}
+
+static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
+{
+ if (x->io_ops && x->io_ops->write)
+ return x->io_ops->write(x, val, reg);
+
+ return -EINVAL;
+}
+
+static inline int
+usb_phy_init(struct usb_phy *x)
+{
+ if (x->init)
+ return x->init(x);
+
+ return 0;
+}
+
+static inline void
+usb_phy_shutdown(struct usb_phy *x)
+{
+ if (x->shutdown)
+ x->shutdown(x);
+}
+
+extern int otg_send_event(enum usb_otg_event event);
+
+#ifdef CONFIG_USB_OTG_UTILS
+extern struct usb_phy *usb_get_transceiver(void);
+extern void usb_put_transceiver(struct usb_phy *);
+extern const char *otg_state_string(enum usb_otg_state state);
+#else
+static inline struct usb_phy *usb_get_transceiver(void)
+{
+ return NULL;
+}
+
+static inline void usb_put_transceiver(struct usb_phy *x)
+{
+}
+
+static inline const char *otg_state_string(enum usb_otg_state state)
+{
+ return NULL;
+}
+#endif
+
+static inline int
+otg_start_hnp(struct usb_otg *otg)
+{
+ if (otg && otg->start_hnp)
+ return otg->start_hnp(otg);
+
+ return -ENOTSUPP;
+}
+
+static inline int
+otg_set_vbus(struct usb_otg *otg, bool enabled)
+{
+ if (otg && otg->set_vbus)
+ return otg->set_vbus(otg, enabled);
+
+ return -ENOTSUPP;
+}
+
+static inline int
+otg_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ if (otg && otg->set_host)
+ return otg->set_host(otg, host);
+
+ return -ENOTSUPP;
+}
+
+
+static inline int
+otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph)
+{
+ if (otg && otg->set_peripheral)
+ return otg->set_peripheral(otg, periph);
+
+ return -ENOTSUPP;
+}
+
+static inline int
+usb_phy_set_power(struct usb_phy *x, unsigned mA)
+{
+ if (x && x->set_power)
+ return x->set_power(x, mA);
+ return 0;
+}
+
+static inline int
+usb_phy_set_suspend(struct usb_phy *x, int suspend)
+{
+ if (x->set_suspend != NULL)
+ return x->set_suspend(x, suspend);
+ else
+ return 0;
+}
+
+static inline int
+otg_start_srp(struct usb_otg *otg)
+{
+ if (otg && otg->start_srp)
+ return otg->start_srp(otg);
+
+ return -ENOTSUPP;
+}
+
+static inline int
+usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&x->notifier, nb);
+}
+
+static inline void
+usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
+{
+ atomic_notifier_chain_unregister(&x->notifier, nb);
+}
+
+extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+
+#endif
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
new file mode 100644
index 0000000..d391a1b
--- /dev/null
+++ b/include/linux/usb/quirks.h
@@ -0,0 +1,21 @@
+
+#ifndef __LINUX_USB_QUIRKS_H
+#define __LINUX_USB_QUIRKS_H
+
+#define USB_QUIRK_STRING_FETCH_255 0x00000001
+
+#define USB_QUIRK_RESET_RESUME 0x00000002
+
+#define USB_QUIRK_NO_SET_INTF 0x00000004
+
+#define USB_QUIRK_CONFIG_INTF_STRINGS 0x00000008
+
+#define USB_QUIRK_RESET_MORPHS 0x00000010
+
+#define USB_QUIRK_HONOR_BNUMINTERFACES 0x00000020
+
+#define USB_QUIRK_DELAY_INIT 0x00000040
+
+#define USB_QUIRK_OTG_PET 0x00000080
+
+#endif
diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
new file mode 100644
index 0000000..55805f9
--- /dev/null
+++ b/include/linux/usb/r8a66597.h
@@ -0,0 +1,481 @@
+/*
+ * R8A66597 driver platform data
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __LINUX_USB_R8A66597_H
+#define __LINUX_USB_R8A66597_H
+
+#define R8A66597_PLATDATA_XTAL_12MHZ 0x01
+#define R8A66597_PLATDATA_XTAL_24MHZ 0x02
+#define R8A66597_PLATDATA_XTAL_48MHZ 0x03
+
+struct r8a66597_platdata {
+ /* This callback can control port power instead of DVSTCTR register. */
+ void (*port_power)(int port, int power);
+
+ /* This parameter is for BUSWAIT */
+ u16 buswait;
+
+ /* set one = on chip controller, set zero = external controller */
+ unsigned on_chip:1;
+
+ /* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
+ unsigned xtal:2;
+
+ /* set one = 3.3V, set zero = 1.5V */
+ unsigned vif:1;
+
+ /* set one = big endian, set zero = little endian */
+ unsigned endian:1;
+
+ /* (external controller only) set one = WR0_N shorted to WR1_N */
+ unsigned wr0_shorted_to_wr1:1;
+
+ /* set one = using SUDMAC */
+ unsigned sudmac:1;
+};
+
+/* Register definitions */
+#define SYSCFG0 0x00
+#define SYSCFG1 0x02
+#define SYSSTS0 0x04
+#define SYSSTS1 0x06
+#define DVSTCTR0 0x08
+#define DVSTCTR1 0x0A
+#define TESTMODE 0x0C
+#define PINCFG 0x0E
+#define DMA0CFG 0x10
+#define DMA1CFG 0x12
+#define CFIFO 0x14
+#define D0FIFO 0x18
+#define D1FIFO 0x1C
+#define CFIFOSEL 0x20
+#define CFIFOCTR 0x22
+#define CFIFOSIE 0x24
+#define D0FIFOSEL 0x28
+#define D0FIFOCTR 0x2A
+#define D1FIFOSEL 0x2C
+#define D1FIFOCTR 0x2E
+#define INTENB0 0x30
+#define INTENB1 0x32
+#define INTENB2 0x34
+#define BRDYENB 0x36
+#define NRDYENB 0x38
+#define BEMPENB 0x3A
+#define SOFCFG 0x3C
+#define INTSTS0 0x40
+#define INTSTS1 0x42
+#define INTSTS2 0x44
+#define BRDYSTS 0x46
+#define NRDYSTS 0x48
+#define BEMPSTS 0x4A
+#define FRMNUM 0x4C
+#define UFRMNUM 0x4E
+#define USBADDR 0x50
+#define USBREQ 0x54
+#define USBVAL 0x56
+#define USBINDX 0x58
+#define USBLENG 0x5A
+#define DCPCFG 0x5C
+#define DCPMAXP 0x5E
+#define DCPCTR 0x60
+#define PIPESEL 0x64
+#define PIPECFG 0x68
+#define PIPEBUF 0x6A
+#define PIPEMAXP 0x6C
+#define PIPEPERI 0x6E
+#define PIPE1CTR 0x70
+#define PIPE2CTR 0x72
+#define PIPE3CTR 0x74
+#define PIPE4CTR 0x76
+#define PIPE5CTR 0x78
+#define PIPE6CTR 0x7A
+#define PIPE7CTR 0x7C
+#define PIPE8CTR 0x7E
+#define PIPE9CTR 0x80
+#define PIPE1TRE 0x90
+#define PIPE1TRN 0x92
+#define PIPE2TRE 0x94
+#define PIPE2TRN 0x96
+#define PIPE3TRE 0x98
+#define PIPE3TRN 0x9A
+#define PIPE4TRE 0x9C
+#define PIPE4TRN 0x9E
+#define PIPE5TRE 0xA0
+#define PIPE5TRN 0xA2
+#define DEVADD0 0xD0
+#define DEVADD1 0xD2
+#define DEVADD2 0xD4
+#define DEVADD3 0xD6
+#define DEVADD4 0xD8
+#define DEVADD5 0xDA
+#define DEVADD6 0xDC
+#define DEVADD7 0xDE
+#define DEVADD8 0xE0
+#define DEVADD9 0xE2
+#define DEVADDA 0xE4
+
+/* System Configuration Control Register */
+#define XTAL 0xC000 /* b15-14: Crystal selection */
+#define XTAL48 0x8000 /* 48MHz */
+#define XTAL24 0x4000 /* 24MHz */
+#define XTAL12 0x0000 /* 12MHz */
+#define XCKE 0x2000 /* b13: External clock enable */
+#define PLLC 0x0800 /* b11: PLL control */
+#define SCKE 0x0400 /* b10: USB clock enable */
+#define PCSDIS 0x0200 /* b9: not CS wakeup */
+#define LPSME 0x0100 /* b8: Low power sleep mode */
+#define HSE 0x0080 /* b7: Hi-speed enable */
+#define DCFM 0x0040 /* b6: Controller function select */
+#define DRPD 0x0020 /* b5: D+/- pull down control */
+#define DPRPU 0x0010 /* b4: D+ pull up control */
+#define USBE 0x0001 /* b0: USB module operation enable */
+
+/* System Configuration Status Register */
+#define OVCBIT 0x8000 /* b15-14: Over-current bit */
+#define OVCMON 0xC000 /* b15-14: Over-current monitor */
+#define SOFEA 0x0020 /* b5: SOF monitor */
+#define IDMON 0x0004 /* b3: ID-pin monitor */
+#define LNST 0x0003 /* b1-0: D+, D- line status */
+#define SE1 0x0003 /* SE1 */
+#define FS_KSTS 0x0002 /* Full-Speed K State */
+#define FS_JSTS 0x0001 /* Full-Speed J State */
+#define LS_JSTS 0x0002 /* Low-Speed J State */
+#define LS_KSTS 0x0001 /* Low-Speed K State */
+#define SE0 0x0000 /* SE0 */
+
+/* Device State Control Register */
+#define EXTLP0 0x0400 /* b10: External port */
+#define VBOUT 0x0200 /* b9: VBUS output */
+#define WKUP 0x0100 /* b8: Remote wakeup */
+#define RWUPE 0x0080 /* b7: Remote wakeup sense */
+#define USBRST 0x0040 /* b6: USB reset enable */
+#define RESUME 0x0020 /* b5: Resume enable */
+#define UACT 0x0010 /* b4: USB bus enable */
+#define RHST 0x0007 /* b1-0: Reset handshake status */
+#define HSPROC 0x0004 /* HS handshake is processing */
+#define HSMODE 0x0003 /* Hi-Speed mode */
+#define FSMODE 0x0002 /* Full-Speed mode */
+#define LSMODE 0x0001 /* Low-Speed mode */
+#define UNDECID 0x0000 /* Undecided */
+
+/* Test Mode Register */
+#define UTST 0x000F /* b3-0: Test select */
+#define H_TST_PACKET 0x000C /* HOST TEST Packet */
+#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */
+#define H_TST_K 0x000A /* HOST TEST K */
+#define H_TST_J 0x0009 /* HOST TEST J */
+#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */
+#define P_TST_PACKET 0x0004 /* PERI TEST Packet */
+#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */
+#define P_TST_K 0x0002 /* PERI TEST K */
+#define P_TST_J 0x0001 /* PERI TEST J */
+#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */
+
+/* Data Pin Configuration Register */
+#define LDRV 0x8000 /* b15: Drive Current Adjust */
+#define VIF1 0x0000 /* VIF = 1.8V */
+#define VIF3 0x8000 /* VIF = 3.3V */
+#define INTA 0x0001 /* b1: USB INT-pin active */
+
+/* DMAx Pin Configuration Register */
+#define DREQA 0x4000 /* b14: Dreq active select */
+#define BURST 0x2000 /* b13: Burst mode */
+#define DACKA 0x0400 /* b10: Dack active select */
+#define DFORM 0x0380 /* b9-7: DMA mode select */
+#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */
+#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */
+#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */
+#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */
+#define DENDA 0x0040 /* b6: Dend active select */
+#define PKTM 0x0020 /* b5: Packet mode */
+#define DENDE 0x0010 /* b4: Dend enable */
+#define OBUS 0x0004 /* b2: OUTbus mode */
+
+/* CFIFO/DxFIFO Port Select Register */
+#define RCNT 0x8000 /* b15: Read count mode */
+#define REW 0x4000 /* b14: Buffer rewind */
+#define DCLRM 0x2000 /* b13: DMA buffer clear mode */
+#define DREQE 0x1000 /* b12: DREQ output enable */
+#define MBW_8 0x0000 /* 8bit */
+#define MBW_16 0x0400 /* 16bit */
+#define MBW_32 0x0800 /* 32bit */
+#define BIGEND 0x0100 /* b8: Big endian mode */
+#define BYTE_LITTLE 0x0000 /* little dendian */
+#define BYTE_BIG 0x0100 /* big endifan */
+#define ISEL 0x0020 /* b5: DCP FIFO port direction select */
+#define CURPIPE 0x000F /* b2-0: PIPE select */
+
+/* CFIFO/DxFIFO Port Control Register */
+#define BVAL 0x8000 /* b15: Buffer valid flag */
+#define BCLR 0x4000 /* b14: Buffer clear */
+#define FRDY 0x2000 /* b13: FIFO ready */
+#define DTLN 0x0FFF /* b11-0: FIFO received data length */
+
+/* Interrupt Enable Register 0 */
+#define VBSE 0x8000 /* b15: VBUS interrupt */
+#define RSME 0x4000 /* b14: Resume interrupt */
+#define SOFE 0x2000 /* b13: Frame update interrupt */
+#define DVSE 0x1000 /* b12: Device state transition interrupt */
+#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */
+#define BEMPE 0x0400 /* b10: Buffer empty interrupt */
+#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */
+#define BRDYE 0x0100 /* b8: Buffer ready interrupt */
+
+/* Interrupt Enable Register 1 */
+#define OVRCRE 0x8000 /* b15: Over-current interrupt */
+#define BCHGE 0x4000 /* b14: USB us chenge interrupt */
+#define DTCHE 0x1000 /* b12: Detach sense interrupt */
+#define ATTCHE 0x0800 /* b11: Attach sense interrupt */
+#define EOFERRE 0x0040 /* b6: EOF error interrupt */
+#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */
+#define SACKE 0x0010 /* b4: SETUP ACK interrupt */
+
+/* BRDY Interrupt Enable/Status Register */
+#define BRDY9 0x0200 /* b9: PIPE9 */
+#define BRDY8 0x0100 /* b8: PIPE8 */
+#define BRDY7 0x0080 /* b7: PIPE7 */
+#define BRDY6 0x0040 /* b6: PIPE6 */
+#define BRDY5 0x0020 /* b5: PIPE5 */
+#define BRDY4 0x0010 /* b4: PIPE4 */
+#define BRDY3 0x0008 /* b3: PIPE3 */
+#define BRDY2 0x0004 /* b2: PIPE2 */
+#define BRDY1 0x0002 /* b1: PIPE1 */
+#define BRDY0 0x0001 /* b1: PIPE0 */
+
+/* NRDY Interrupt Enable/Status Register */
+#define NRDY9 0x0200 /* b9: PIPE9 */
+#define NRDY8 0x0100 /* b8: PIPE8 */
+#define NRDY7 0x0080 /* b7: PIPE7 */
+#define NRDY6 0x0040 /* b6: PIPE6 */
+#define NRDY5 0x0020 /* b5: PIPE5 */
+#define NRDY4 0x0010 /* b4: PIPE4 */
+#define NRDY3 0x0008 /* b3: PIPE3 */
+#define NRDY2 0x0004 /* b2: PIPE2 */
+#define NRDY1 0x0002 /* b1: PIPE1 */
+#define NRDY0 0x0001 /* b1: PIPE0 */
+
+/* BEMP Interrupt Enable/Status Register */
+#define BEMP9 0x0200 /* b9: PIPE9 */
+#define BEMP8 0x0100 /* b8: PIPE8 */
+#define BEMP7 0x0080 /* b7: PIPE7 */
+#define BEMP6 0x0040 /* b6: PIPE6 */
+#define BEMP5 0x0020 /* b5: PIPE5 */
+#define BEMP4 0x0010 /* b4: PIPE4 */
+#define BEMP3 0x0008 /* b3: PIPE3 */
+#define BEMP2 0x0004 /* b2: PIPE2 */
+#define BEMP1 0x0002 /* b1: PIPE1 */
+#define BEMP0 0x0001 /* b0: PIPE0 */
+
+/* SOF Pin Configuration Register */
+#define TRNENSEL 0x0100 /* b8: Select transaction enable period */
+#define BRDYM 0x0040 /* b6: BRDY clear timing */
+#define INTL 0x0020 /* b5: Interrupt sense select */
+#define EDGESTS 0x0010 /* b4: */
+#define SOFMODE 0x000C /* b3-2: SOF pin select */
+#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */
+#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */
+#define SOF_DISABLE 0x0000 /* SOF OUT Disable */
+
+/* Interrupt Status Register 0 */
+#define VBINT 0x8000 /* b15: VBUS interrupt */
+#define RESM 0x4000 /* b14: Resume interrupt */
+#define SOFR 0x2000 /* b13: SOF frame update interrupt */
+#define DVST 0x1000 /* b12: Device state transition interrupt */
+#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */
+#define BEMP 0x0400 /* b10: Buffer empty interrupt */
+#define NRDY 0x0200 /* b9: Buffer not ready interrupt */
+#define BRDY 0x0100 /* b8: Buffer ready interrupt */
+#define VBSTS 0x0080 /* b7: VBUS input port */
+#define DVSQ 0x0070 /* b6-4: Device state */
+#define DS_SPD_CNFG 0x0070 /* Suspend Configured */
+#define DS_SPD_ADDR 0x0060 /* Suspend Address */
+#define DS_SPD_DFLT 0x0050 /* Suspend Default */
+#define DS_SPD_POWR 0x0040 /* Suspend Powered */
+#define DS_SUSP 0x0040 /* Suspend */
+#define DS_CNFG 0x0030 /* Configured */
+#define DS_ADDS 0x0020 /* Address */
+#define DS_DFLT 0x0010 /* Default */
+#define DS_POWR 0x0000 /* Powered */
+#define DVSQS 0x0030 /* b5-4: Device state */
+#define VALID 0x0008 /* b3: Setup packet detected flag */
+#define CTSQ 0x0007 /* b2-0: Control transfer stage */
+#define CS_SQER 0x0006 /* Sequence error */
+#define CS_WRND 0x0005 /* Control write nodata status stage */
+#define CS_WRSS 0x0004 /* Control write status stage */
+#define CS_WRDS 0x0003 /* Control write data stage */
+#define CS_RDSS 0x0002 /* Control read status stage */
+#define CS_RDDS 0x0001 /* Control read data stage */
+#define CS_IDST 0x0000 /* Idle or setup stage */
+
+/* Interrupt Status Register 1 */
+#define OVRCR 0x8000 /* b15: Over-current interrupt */
+#define BCHG 0x4000 /* b14: USB bus chenge interrupt */
+#define DTCH 0x1000 /* b12: Detach sense interrupt */
+#define ATTCH 0x0800 /* b11: Attach sense interrupt */
+#define EOFERR 0x0040 /* b6: EOF-error interrupt */
+#define SIGN 0x0020 /* b5: Setup ignore interrupt */
+#define SACK 0x0010 /* b4: Setup acknowledge interrupt */
+
+/* Frame Number Register */
+#define OVRN 0x8000 /* b15: Overrun error */
+#define CRCE 0x4000 /* b14: Received data error */
+#define FRNM 0x07FF /* b10-0: Frame number */
+
+/* Micro Frame Number Register */
+#define UFRNM 0x0007 /* b2-0: Micro frame number */
+
+/* Default Control Pipe Maxpacket Size Register */
+/* Pipe Maxpacket Size Register */
+#define DEVSEL 0xF000 /* b15-14: Device address select */
+#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */
+
+/* Default Control Pipe Control Register */
+#define BSTS 0x8000 /* b15: Buffer status */
+#define SUREQ 0x4000 /* b14: Send USB request */
+#define CSCLR 0x2000 /* b13: complete-split status clear */
+#define CSSTS 0x1000 /* b12: complete-split status */
+#define SUREQCLR 0x0800 /* b11: stop setup request */
+#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
+#define SQSET 0x0080 /* b7: Sequence toggle bit set */
+#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
+#define PBUSY 0x0020 /* b5: pipe busy */
+#define PINGE 0x0010 /* b4: ping enable */
+#define CCPL 0x0004 /* b2: Enable control transfer complete */
+#define PID 0x0003 /* b1-0: Response PID */
+#define PID_STALL11 0x0003 /* STALL */
+#define PID_STALL 0x0002 /* STALL */
+#define PID_BUF 0x0001 /* BUF */
+#define PID_NAK 0x0000 /* NAK */
+
+/* Pipe Window Select Register */
+#define PIPENM 0x0007 /* b2-0: Pipe select */
+
+/* Pipe Configuration Register */
+#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */
+#define R8A66597_ISO 0xC000 /* Isochronous */
+#define R8A66597_INT 0x8000 /* Interrupt */
+#define R8A66597_BULK 0x4000 /* Bulk */
+#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */
+#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */
+#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */
+#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */
+#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */
+#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */
+
+/* Pipe Buffer Configuration Register */
+#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */
+#define BUFNMB 0x007F /* b6-0: Pipe buffer number */
+#define PIPE0BUF 256
+#define PIPExBUF 64
+
+/* Pipe Maxpacket Size Register */
+#define MXPS 0x07FF /* b10-0: Maxpacket size */
+
+/* Pipe Cycle Configuration Register */
+#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */
+#define IITV 0x0007 /* b2-0: Isochronous interval */
+
+/* Pipex Control Register */
+#define BSTS 0x8000 /* b15: Buffer status */
+#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define CSCLR 0x2000 /* b13: complete-split status clear */
+#define CSSTS 0x1000 /* b12: complete-split status */
+#define ATREPM 0x0400 /* b10: Auto repeat mode */
+#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */
+#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
+#define SQSET 0x0080 /* b7: Sequence toggle bit set */
+#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
+#define PBUSY 0x0020 /* b5: pipe busy */
+#define PID 0x0003 /* b1-0: Response PID */
+
+/* PIPExTRE */
+#define TRENB 0x0200 /* b9: Transaction counter enable */
+#define TRCLR 0x0100 /* b8: Transaction counter clear */
+
+/* PIPExTRN */
+#define TRNCNT 0xFFFF /* b15-0: Transaction counter */
+
+/* DEVADDx */
+#define UPPHUB 0x7800
+#define HUBPORT 0x0700
+#define USBSPD 0x00C0
+#define RTPORT 0x0001
+
+/* SUDMAC registers */
+#define CH0CFG 0x00
+#define CH1CFG 0x04
+#define CH0BA 0x10
+#define CH1BA 0x14
+#define CH0BBC 0x18
+#define CH1BBC 0x1C
+#define CH0CA 0x20
+#define CH1CA 0x24
+#define CH0CBC 0x28
+#define CH1CBC 0x2C
+#define CH0DEN 0x30
+#define CH1DEN 0x34
+#define DSTSCLR 0x38
+#define DBUFCTRL 0x3C
+#define DINTCTRL 0x40
+#define DINTSTS 0x44
+#define DINTSTSCLR 0x48
+#define CH0SHCTRL 0x50
+#define CH1SHCTRL 0x54
+
+/* SUDMAC Configuration Registers */
+#define SENDBUFM 0x1000 /* b12: Transmit Buffer Mode */
+#define RCVENDM 0x0100 /* b8: Receive Data Transfer End Mode */
+#define LBA_WAIT 0x0030 /* b5-4: Local Bus Access Wait */
+
+/* DMA Enable Registers */
+#define DEN 0x0001 /* b1: DMA Transfer Enable */
+
+/* DMA Status Clear Register */
+#define CH1STCLR 0x0002 /* b2: Ch1 DMA Status Clear */
+#define CH0STCLR 0x0001 /* b1: Ch0 DMA Status Clear */
+
+/* DMA Buffer Control Register */
+#define CH1BUFW 0x0200 /* b9: Ch1 DMA Buffer Data Transfer Enable */
+#define CH0BUFW 0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */
+#define CH1BUFS 0x0002 /* b2: Ch1 DMA Buffer Data Status */
+#define CH0BUFS 0x0001 /* b1: Ch0 DMA Buffer Data Status */
+
+/* DMA Interrupt Control Register */
+#define CH1ERRE 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Enable */
+#define CH0ERRE 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */
+#define CH1ENDE 0x0002 /* b2: Ch1 DMA Transfer End Int Enable */
+#define CH0ENDE 0x0001 /* b1: Ch0 DMA Transfer End Int Enable */
+
+/* DMA Interrupt Status Register */
+#define CH1ERRS 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Status */
+#define CH0ERRS 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */
+#define CH1ENDS 0x0002 /* b2: Ch1 DMA Transfer End Int Status */
+#define CH0ENDS 0x0001 /* b1: Ch0 DMA Transfer End Int Status */
+
+/* DMA Interrupt Status Clear Register */
+#define CH1ERRC 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Stat Clear */
+#define CH0ERRC 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */
+#define CH1ENDC 0x0002 /* b2: Ch1 DMA Transfer End Int Stat Clear */
+#define CH0ENDC 0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */
+
+#endif /* __LINUX_USB_R8A66597_H */
+
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
new file mode 100644
index 0000000..547e59c
--- /dev/null
+++ b/include/linux/usb/renesas_usbhs.h
@@ -0,0 +1,196 @@
+/*
+ * Renesas USB
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+#ifndef RENESAS_USB_H
+#define RENESAS_USB_H
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+
+/*
+ * module type
+ *
+ * it will be return value from get_id
+ */
+enum {
+ USBHS_HOST = 0,
+ USBHS_GADGET,
+ USBHS_MAX,
+};
+
+/*
+ * callback functions table for driver
+ *
+ * These functions are called from platform for driver.
+ * Callback function's pointer will be set before
+ * renesas_usbhs_platform_callback :: hardware_init was called
+ */
+struct renesas_usbhs_driver_callback {
+ int (*notify_hotplug)(struct platform_device *pdev);
+};
+
+/*
+ * callback functions for platform
+ *
+ * These functions are called from driver for platform
+ */
+struct renesas_usbhs_platform_callback {
+
+ /*
+ * option:
+ *
+ * Hardware init function for platform.
+ * it is called when driver was probed.
+ */
+ int (*hardware_init)(struct platform_device *pdev);
+
+ /*
+ * option:
+ *
+ * Hardware exit function for platform.
+ * it is called when driver was removed
+ */
+ void (*hardware_exit)(struct platform_device *pdev);
+
+ /*
+ * option:
+ *
+ * for board specific clock control
+ */
+ void (*power_ctrl)(struct platform_device *pdev,
+ void __iomem *base, int enable);
+
+ /*
+ * option:
+ *
+ * Phy reset for platform
+ */
+ void (*phy_reset)(struct platform_device *pdev);
+
+ /*
+ * get USB ID function
+ * - USBHS_HOST
+ * - USBHS_GADGET
+ */
+ int (*get_id)(struct platform_device *pdev);
+
+ /*
+ * get VBUS status function.
+ */
+ int (*get_vbus)(struct platform_device *pdev);
+
+ /*
+ * option:
+ *
+ * VBUS control is needed for Host
+ */
+ int (*set_vbus)(struct platform_device *pdev, int enable);
+};
+
+/*
+ * parameters for renesas usbhs
+ *
+ * some register needs USB chip specific parameters.
+ * This struct show it to driver
+ */
+struct renesas_usbhs_driver_param {
+ /*
+ * pipe settings
+ */
+ u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */
+ int pipe_size; /* pipe_type array size */
+
+ /*
+ * option:
+ *
+ * for BUSWAIT :: BWAIT
+ * see
+ * renesas_usbhs/common.c :: usbhsc_set_buswait()
+ * */
+ int buswait_bwait;
+
+ /*
+ * option:
+ *
+ * delay time from notify_hotplug callback
+ */
+ int detection_delay; /* msec */
+
+ /*
+ * option:
+ *
+ * dma id for dmaengine
+ */
+ int d0_tx_id;
+ int d0_rx_id;
+ int d1_tx_id;
+ int d1_rx_id;
+
+ /*
+ * option:
+ *
+ * pio <--> dma border.
+ */
+ int pio_dma_border; /* default is 64byte */
+
+ /*
+ * option:
+ */
+ u32 has_otg:1; /* for controlling PWEN/EXTLP */
+ u32 has_sudmac:1; /* for SUDMAC */
+};
+
+/*
+ * option:
+ *
+ * platform information for renesas_usbhs driver.
+ */
+struct renesas_usbhs_platform_info {
+ /*
+ * option:
+ *
+ * platform set these functions before
+ * call platform_add_devices if needed
+ */
+ struct renesas_usbhs_platform_callback platform_callback;
+
+ /*
+ * driver set these callback functions pointer.
+ * platform can use it on callback functions
+ */
+ struct renesas_usbhs_driver_callback driver_callback;
+
+ /*
+ * option:
+ *
+ * driver use these param for some register
+ */
+ struct renesas_usbhs_driver_param driver_param;
+};
+
+/*
+ * macro for platform
+ */
+#define renesas_usbhs_get_info(pdev)\
+ ((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data)
+
+#define renesas_usbhs_call_notify_hotplug(pdev) \
+ ({ \
+ struct renesas_usbhs_driver_callback *dc; \
+ dc = &(renesas_usbhs_get_info(pdev)->driver_callback); \
+ if (dc && dc->notify_hotplug) \
+ dc->notify_hotplug(pdev); \
+ })
+#endif /* RENESAS_USB_H */
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
new file mode 100644
index 0000000..88fceb7
--- /dev/null
+++ b/include/linux/usb/rndis_host.h
@@ -0,0 +1,272 @@
+/*
+ * Host Side support for RNDIS Networking Links
+ * Copyright (C) 2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_RNDIS_HOST_H
+#define __LINUX_USB_RNDIS_HOST_H
+
+/*
+ * CONTROL uses CDC "encapsulated commands" with funky notifications.
+ * - control-out: SEND_ENCAPSULATED
+ * - interrupt-in: RESPONSE_AVAILABLE
+ * - control-in: GET_ENCAPSULATED
+ *
+ * We'll try to ignore the RESPONSE_AVAILABLE notifications.
+ *
+ * REVISIT some RNDIS implementations seem to have curious issues still
+ * to be resolved.
+ */
+struct rndis_msg_hdr {
+ __le32 msg_type; /* RNDIS_MSG_* */
+ __le32 msg_len;
+ /* followed by data that varies between messages */
+ __le32 request_id;
+ __le32 status;
+ /* ... and more */
+} __attribute__ ((packed));
+
+/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */
+#define CONTROL_BUFFER_SIZE 1025
+
+/* RNDIS defines an (absurdly huge) 10 second control timeout,
+ * but ActiveSync seems to use a more usual 5 second timeout
+ * (which matches the USB 2.0 spec).
+ */
+#define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000)
+
+#define RNDIS_MSG_COMPLETION cpu_to_le32(0x80000000)
+
+/* codes for "msg_type" field of rndis messages;
+ * only the data channel uses packet messages (maybe batched);
+ * everything else goes on the control channel.
+ */
+#define RNDIS_MSG_PACKET cpu_to_le32(0x00000001) /* 1-N packets */
+#define RNDIS_MSG_INIT cpu_to_le32(0x00000002)
+#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_HALT cpu_to_le32(0x00000003)
+#define RNDIS_MSG_QUERY cpu_to_le32(0x00000004)
+#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_SET cpu_to_le32(0x00000005)
+#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_RESET cpu_to_le32(0x00000006)
+#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_INDICATE cpu_to_le32(0x00000007)
+#define RNDIS_MSG_KEEPALIVE cpu_to_le32(0x00000008)
+#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
+
+/* codes for "status" field of completion messages */
+#define RNDIS_STATUS_SUCCESS cpu_to_le32(0x00000000)
+#define RNDIS_STATUS_FAILURE cpu_to_le32(0xc0000001)
+#define RNDIS_STATUS_INVALID_DATA cpu_to_le32(0xc0010015)
+#define RNDIS_STATUS_NOT_SUPPORTED cpu_to_le32(0xc00000bb)
+#define RNDIS_STATUS_MEDIA_CONNECT cpu_to_le32(0x4001000b)
+#define RNDIS_STATUS_MEDIA_DISCONNECT cpu_to_le32(0x4001000c)
+#define RNDIS_STATUS_MEDIA_SPECIFIC_INDICATION cpu_to_le32(0x40010012)
+
+/* codes for OID_GEN_PHYSICAL_MEDIUM */
+#define RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED cpu_to_le32(0x00000000)
+#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN cpu_to_le32(0x00000001)
+#define RNDIS_PHYSICAL_MEDIUM_CABLE_MODEM cpu_to_le32(0x00000002)
+#define RNDIS_PHYSICAL_MEDIUM_PHONE_LINE cpu_to_le32(0x00000003)
+#define RNDIS_PHYSICAL_MEDIUM_POWER_LINE cpu_to_le32(0x00000004)
+#define RNDIS_PHYSICAL_MEDIUM_DSL cpu_to_le32(0x00000005)
+#define RNDIS_PHYSICAL_MEDIUM_FIBRE_CHANNEL cpu_to_le32(0x00000006)
+#define RNDIS_PHYSICAL_MEDIUM_1394 cpu_to_le32(0x00000007)
+#define RNDIS_PHYSICAL_MEDIUM_WIRELESS_WAN cpu_to_le32(0x00000008)
+#define RNDIS_PHYSICAL_MEDIUM_MAX cpu_to_le32(0x00000009)
+
+struct rndis_data_hdr {
+ __le32 msg_type; /* RNDIS_MSG_PACKET */
+ __le32 msg_len; /* rndis_data_hdr + data_len + pad */
+ __le32 data_offset; /* 36 -- right after header */
+ __le32 data_len; /* ... real packet size */
+
+ __le32 oob_data_offset; /* zero */
+ __le32 oob_data_len; /* zero */
+ __le32 num_oob; /* zero */
+ __le32 packet_data_offset; /* zero */
+
+ __le32 packet_data_len; /* zero */
+ __le32 vc_handle; /* zero */
+ __le32 reserved; /* zero */
+} __attribute__ ((packed));
+
+struct rndis_init { /* OUT */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_INIT */
+ __le32 msg_len; /* 24 */
+ __le32 request_id;
+ __le32 major_version; /* of rndis (1.0) */
+ __le32 minor_version;
+ __le32 max_transfer_size;
+} __attribute__ ((packed));
+
+struct rndis_init_c { /* IN */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_INIT_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+ __le32 major_version; /* of rndis (1.0) */
+ __le32 minor_version;
+ __le32 device_flags;
+ __le32 medium; /* zero == 802.3 */
+ __le32 max_packets_per_message;
+ __le32 max_transfer_size;
+ __le32 packet_alignment; /* max 7; (1<<n) bytes */
+ __le32 af_list_offset; /* zero */
+ __le32 af_list_size; /* zero */
+} __attribute__ ((packed));
+
+struct rndis_halt { /* OUT (no reply) */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_HALT */
+ __le32 msg_len;
+ __le32 request_id;
+} __attribute__ ((packed));
+
+struct rndis_query { /* OUT */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_QUERY */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 oid;
+ __le32 len;
+ __le32 offset;
+/*?*/ __le32 handle; /* zero */
+} __attribute__ ((packed));
+
+struct rndis_query_c { /* IN */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_QUERY_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+ __le32 len;
+ __le32 offset;
+} __attribute__ ((packed));
+
+struct rndis_set { /* OUT */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_SET */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 oid;
+ __le32 len;
+ __le32 offset;
+/*?*/ __le32 handle; /* zero */
+} __attribute__ ((packed));
+
+struct rndis_set_c { /* IN */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_SET_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+} __attribute__ ((packed));
+
+struct rndis_reset { /* IN */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_RESET */
+ __le32 msg_len;
+ __le32 reserved;
+} __attribute__ ((packed));
+
+struct rndis_reset_c { /* OUT */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_RESET_C */
+ __le32 msg_len;
+ __le32 status;
+ __le32 addressing_lost;
+} __attribute__ ((packed));
+
+struct rndis_indicate { /* IN (unrequested) */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_INDICATE */
+ __le32 msg_len;
+ __le32 status;
+ __le32 length;
+ __le32 offset;
+/**/ __le32 diag_status;
+ __le32 error_offset;
+/**/ __le32 message;
+} __attribute__ ((packed));
+
+struct rndis_keepalive { /* OUT (optionally IN) */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_KEEPALIVE */
+ __le32 msg_len;
+ __le32 request_id;
+} __attribute__ ((packed));
+
+struct rndis_keepalive_c { /* IN (optionally OUT) */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_KEEPALIVE_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+} __attribute__ ((packed));
+
+/* NOTE: about 30 OIDs are "mandatory" for peripherals to support ... and
+ * there are gobs more that may optionally be supported. We'll avoid as much
+ * of that mess as possible.
+ */
+#define OID_802_3_PERMANENT_ADDRESS cpu_to_le32(0x01010101)
+#define OID_GEN_MAXIMUM_FRAME_SIZE cpu_to_le32(0x00010106)
+#define OID_GEN_CURRENT_PACKET_FILTER cpu_to_le32(0x0001010e)
+#define OID_GEN_PHYSICAL_MEDIUM cpu_to_le32(0x00010202)
+
+/* packet filter bits used by OID_GEN_CURRENT_PACKET_FILTER */
+#define RNDIS_PACKET_TYPE_DIRECTED cpu_to_le32(0x00000001)
+#define RNDIS_PACKET_TYPE_MULTICAST cpu_to_le32(0x00000002)
+#define RNDIS_PACKET_TYPE_ALL_MULTICAST cpu_to_le32(0x00000004)
+#define RNDIS_PACKET_TYPE_BROADCAST cpu_to_le32(0x00000008)
+#define RNDIS_PACKET_TYPE_SOURCE_ROUTING cpu_to_le32(0x00000010)
+#define RNDIS_PACKET_TYPE_PROMISCUOUS cpu_to_le32(0x00000020)
+#define RNDIS_PACKET_TYPE_SMT cpu_to_le32(0x00000040)
+#define RNDIS_PACKET_TYPE_ALL_LOCAL cpu_to_le32(0x00000080)
+#define RNDIS_PACKET_TYPE_GROUP cpu_to_le32(0x00001000)
+#define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL cpu_to_le32(0x00002000)
+#define RNDIS_PACKET_TYPE_FUNCTIONAL cpu_to_le32(0x00004000)
+#define RNDIS_PACKET_TYPE_MAC_FRAME cpu_to_le32(0x00008000)
+
+/* default filter used with RNDIS devices */
+#define RNDIS_DEFAULT_FILTER ( \
+ RNDIS_PACKET_TYPE_DIRECTED | \
+ RNDIS_PACKET_TYPE_BROADCAST | \
+ RNDIS_PACKET_TYPE_ALL_MULTICAST | \
+ RNDIS_PACKET_TYPE_PROMISCUOUS)
+
+/* Flags to require specific physical medium type for generic_rndis_bind() */
+#define FLAG_RNDIS_PHYM_NOT_WIRELESS 0x0001
+#define FLAG_RNDIS_PHYM_WIRELESS 0x0002
+
+/* Flags for driver_info::data */
+#define RNDIS_DRIVER_DATA_POLL_STATUS 1 /* poll status before control */
+
+extern void rndis_status(struct usbnet *dev, struct urb *urb);
+extern int
+rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen);
+extern int
+generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags);
+extern void rndis_unbind(struct usbnet *dev, struct usb_interface *intf);
+extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb);
+extern struct sk_buff *
+rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags);
+
+#endif /* __LINUX_USB_RNDIS_HOST_H */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
new file mode 100644
index 0000000..82e6d05
--- /dev/null
+++ b/include/linux/usb/serial.h
@@ -0,0 +1,287 @@
+/*
+ * USB Serial Converter stuff
+ *
+ * Copyright (C) 1999 - 2005
+ * Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ */
+
+#ifndef __LINUX_USB_SERIAL_H
+#define __LINUX_USB_SERIAL_H
+
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/sysrq.h>
+#include <linux/kfifo.h>
+
+#define SERIAL_TTY_MAJOR 188
+#define SERIAL_TTY_MINORS 254
+#define SERIAL_TTY_NO_MINOR 255
+
+#define MAX_NUM_PORTS 8
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+#define USB_SERIAL_WRITE_BUSY 0
+
+struct usb_serial_port {
+ struct usb_serial *serial;
+ struct tty_port port;
+ spinlock_t lock;
+ unsigned char number;
+
+ unsigned char *interrupt_in_buffer;
+ struct urb *interrupt_in_urb;
+ __u8 interrupt_in_endpointAddress;
+
+ unsigned char *interrupt_out_buffer;
+ int interrupt_out_size;
+ struct urb *interrupt_out_urb;
+ __u8 interrupt_out_endpointAddress;
+
+ unsigned char *bulk_in_buffer;
+ int bulk_in_size;
+ struct urb *read_urb;
+ __u8 bulk_in_endpointAddress;
+
+ unsigned char *bulk_in_buffers[2];
+ struct urb *read_urbs[2];
+ unsigned long read_urbs_free;
+
+ unsigned char *bulk_out_buffer;
+ int bulk_out_size;
+ struct urb *write_urb;
+ struct kfifo write_fifo;
+
+ unsigned char *bulk_out_buffers[2];
+ struct urb *write_urbs[2];
+ unsigned long write_urbs_free;
+ __u8 bulk_out_endpointAddress;
+
+ int tx_bytes;
+
+ unsigned long flags;
+ wait_queue_head_t write_wait;
+ struct work_struct work;
+ char throttled;
+ char throttle_req;
+ unsigned long sysrq;
+ struct device dev;
+};
+#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
+
+static inline void *usb_get_serial_port_data(struct usb_serial_port *port)
+{
+ return dev_get_drvdata(&port->dev);
+}
+
+static inline void usb_set_serial_port_data(struct usb_serial_port *port,
+ void *data)
+{
+ dev_set_drvdata(&port->dev, data);
+}
+
+struct usb_serial {
+ struct usb_device *dev;
+ struct usb_serial_driver *type;
+ struct usb_interface *interface;
+ unsigned char disconnected:1;
+ unsigned char suspending:1;
+ unsigned char attached:1;
+ unsigned char minor;
+ unsigned char num_ports;
+ unsigned char num_port_pointers;
+ char num_interrupt_in;
+ char num_interrupt_out;
+ char num_bulk_in;
+ char num_bulk_out;
+ struct usb_serial_port *port[MAX_NUM_PORTS];
+ struct kref kref;
+ struct mutex disc_mutex;
+ void *private;
+};
+#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
+
+static inline void *usb_get_serial_data(struct usb_serial *serial)
+{
+ return serial->private;
+}
+
+static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
+{
+ serial->private = data;
+}
+
+struct usb_serial_driver {
+ const char *description;
+ const struct usb_device_id *id_table;
+ char num_ports;
+
+ struct list_head driver_list;
+ struct device_driver driver;
+ struct usb_driver *usb_driver;
+ struct usb_dynids dynids;
+
+ size_t bulk_in_size;
+ size_t bulk_out_size;
+
+ int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
+ int (*attach)(struct usb_serial *serial);
+ int (*calc_num_ports) (struct usb_serial *serial);
+
+ void (*disconnect)(struct usb_serial *serial);
+ void (*release)(struct usb_serial *serial);
+
+ int (*port_probe)(struct usb_serial_port *port);
+ int (*port_remove)(struct usb_serial_port *port);
+
+ int (*suspend)(struct usb_serial *serial, pm_message_t message);
+ int (*resume)(struct usb_serial *serial);
+
+
+
+ int (*open)(struct tty_struct *tty, struct usb_serial_port *port);
+ void (*close)(struct usb_serial_port *port);
+ int (*write)(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+
+ int (*write_room)(struct tty_struct *tty);
+ int (*ioctl)(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg);
+ void (*set_termios)(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old);
+ void (*break_ctl)(struct tty_struct *tty, int break_state);
+ int (*chars_in_buffer)(struct tty_struct *tty);
+ void (*throttle)(struct tty_struct *tty);
+ void (*unthrottle)(struct tty_struct *tty);
+ int (*tiocmget)(struct tty_struct *tty);
+ int (*tiocmset)(struct tty_struct *tty,
+ unsigned int set, unsigned int clear);
+ int (*get_icount)(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
+ void (*dtr_rts)(struct usb_serial_port *port, int on);
+ int (*carrier_raised)(struct usb_serial_port *port);
+ void (*init_termios)(struct tty_struct *tty);
+
+ void (*read_int_callback)(struct urb *urb);
+ void (*write_int_callback)(struct urb *urb);
+ void (*read_bulk_callback)(struct urb *urb);
+ void (*write_bulk_callback)(struct urb *urb);
+
+ void (*process_read_urb)(struct urb *urb);
+
+ int (*prepare_write_buffer)(struct usb_serial_port *port,
+ void *dest, size_t size);
+};
+#define to_usb_serial_driver(d) \
+ container_of(d, struct usb_serial_driver, driver)
+
+extern int usb_serial_register_drivers(struct usb_driver *udriver,
+ struct usb_serial_driver * const serial_drivers[]);
+extern void usb_serial_deregister_drivers(struct usb_driver *udriver,
+ struct usb_serial_driver * const serial_drivers[]);
+extern void usb_serial_port_softint(struct usb_serial_port *port);
+
+extern int usb_serial_probe(struct usb_interface *iface,
+ const struct usb_device_id *id);
+extern void usb_serial_disconnect(struct usb_interface *iface);
+
+extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message);
+extern int usb_serial_resume(struct usb_interface *intf);
+
+extern int ezusb_writememory(struct usb_serial *serial, int address,
+ unsigned char *data, int length, __u8 bRequest);
+extern int ezusb_set_reset(struct usb_serial *serial, unsigned char reset_bit);
+
+#ifdef CONFIG_USB_SERIAL_CONSOLE
+extern void usb_serial_console_init(int debug, int minor);
+extern void usb_serial_console_exit(void);
+extern void usb_serial_console_disconnect(struct usb_serial *serial);
+#else
+static inline void usb_serial_console_init(int debug, int minor) { }
+static inline void usb_serial_console_exit(void) { }
+static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
+#endif
+
+extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
+extern void usb_serial_put(struct usb_serial *serial);
+extern int usb_serial_generic_open(struct tty_struct *tty,
+ struct usb_serial_port *port);
+extern int usb_serial_generic_write(struct tty_struct *tty,
+ struct usb_serial_port *port, const unsigned char *buf, int count);
+extern void usb_serial_generic_close(struct usb_serial_port *port);
+extern int usb_serial_generic_resume(struct usb_serial *serial);
+extern int usb_serial_generic_write_room(struct tty_struct *tty);
+extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
+extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
+extern void usb_serial_generic_throttle(struct tty_struct *tty);
+extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
+extern void usb_serial_generic_disconnect(struct usb_serial *serial);
+extern void usb_serial_generic_release(struct usb_serial *serial);
+extern int usb_serial_generic_register(int debug);
+extern void usb_serial_generic_deregister(void);
+extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
+ gfp_t mem_flags);
+extern void usb_serial_generic_process_read_urb(struct urb *urb);
+extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,
+ void *dest, size_t size);
+extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
+ unsigned int ch);
+extern int usb_serial_handle_break(struct usb_serial_port *port);
+extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+ struct tty_struct *tty,
+ unsigned int status);
+
+
+extern int usb_serial_bus_register(struct usb_serial_driver *device);
+extern void usb_serial_bus_deregister(struct usb_serial_driver *device);
+
+extern struct usb_serial_driver usb_serial_generic_device;
+extern struct bus_type usb_serial_bus_type;
+extern struct tty_driver *usb_serial_tty_driver;
+
+static inline void usb_serial_debug_data(int debug,
+ struct device *dev,
+ const char *function, int size,
+ const unsigned char *data)
+{
+ int i;
+
+ if (debug) {
+ dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ",
+ function, size);
+ for (i = 0; i < size; ++i)
+ printk("%.2x ", data[i]);
+ printk("\n");
+ }
+}
+
+#undef dbg
+#define dbg(format, arg...) \
+do { \
+ if (debug) \
+ printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \
+} while (0)
+
+#define dev_err_console(usport, fmt, ...) \
+do { \
+ static bool __print_once; \
+ struct usb_serial_port *__port = (usport); \
+ \
+ if (!__port->port.console || !__print_once) { \
+ __print_once = true; \
+ dev_err(&__port->dev, fmt, ##__VA_ARGS__); \
+ } \
+} while (0)
+
+#define module_usb_serial_driver(__usb_driver, __serial_drivers) \
+ module_driver(__usb_driver, usb_serial_register_drivers, \
+ usb_serial_deregister_drivers, __serial_drivers)
+
+#endif
+
diff --git a/include/linux/usb/sl811.h b/include/linux/usb/sl811.h
new file mode 100644
index 0000000..3afe4d1
--- /dev/null
+++ b/include/linux/usb/sl811.h
@@ -0,0 +1,29 @@
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the sl811hs onto platform_bus named "sl811-hcd".
+ */
+
+#ifndef __LINUX_USB_SL811_H
+#define __LINUX_USB_SL811_H
+
+struct sl811_platform_data {
+ unsigned can_wakeup:1;
+
+ /* given port_power, msec/2 after power on till power good */
+ u8 potpg;
+
+ /* mA/2 power supplied on this port (max = default = 250) */
+ u8 power;
+
+ /* sl811 relies on an external source of VBUS current */
+ void (*port_power)(struct device *dev, int is_on);
+
+ /* pulse sl811 nRST (probably with a GPIO) */
+ void (*reset)(struct device *dev);
+
+ /* some boards need something like these: */
+ /* int (*check_overcurrent)(struct device *dev); */
+ /* void (*clock_enable)(struct device *dev, int is_on); */
+};
+
+#endif /* __LINUX_USB_SL811_H */
diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h
new file mode 100644
index 0000000..5e4a092
--- /dev/null
+++ b/include/linux/usb/storage.h
@@ -0,0 +1,78 @@
+#ifndef __LINUX_USB_STORAGE_H
+#define __LINUX_USB_STORAGE_H
+
+/*
+ * linux/usb/storage.h
+ *
+ * Copyright Matthew Wilcox for Intel Corp, 2010
+ *
+ * This file contains definitions taken from the
+ * USB Mass Storage Class Specification Overview
+ *
+ * Distributed under the terms of the GNU GPL, version two.
+ */
+
+
+#define USB_SC_RBC 0x01
+#define USB_SC_8020 0x02
+#define USB_SC_QIC 0x03
+#define USB_SC_UFI 0x04
+#define USB_SC_8070 0x05
+#define USB_SC_SCSI 0x06
+#define USB_SC_LOCKABLE 0x07
+
+#define USB_SC_ISD200 0xf0
+#define USB_SC_CYP_ATACB 0xf1
+#define USB_SC_DEVICE 0xff
+
+
+#define USB_PR_CBI 0x00
+#define USB_PR_CB 0x01
+#define USB_PR_BULK 0x50
+#define USB_PR_UAS 0x62
+
+#define USB_PR_USBAT 0x80
+#define USB_PR_EUSB_SDDR09 0x81
+#define USB_PR_SDDR55 0x82
+#define USB_PR_DPCM_USB 0xf0
+#define USB_PR_FREECOM 0xf1
+#define USB_PR_DATAFAB 0xf2
+#define USB_PR_JUMPSHOT 0xf3
+#define USB_PR_ALAUDA 0xf4
+#define USB_PR_KARMA 0xf5
+
+#define USB_PR_DEVICE 0xff
+
+
+struct bulk_cb_wrap {
+ __le32 Signature;
+ __u32 Tag;
+ __le32 DataTransferLength;
+ __u8 Flags;
+ __u8 Lun;
+ __u8 Length;
+ __u8 CDB[16];
+};
+
+#define US_BULK_CB_WRAP_LEN 31
+#define US_BULK_CB_SIGN 0x43425355
+#define US_BULK_FLAG_IN (1 << 7)
+#define US_BULK_FLAG_OUT 0
+
+struct bulk_cs_wrap {
+ __le32 Signature;
+ __u32 Tag;
+ __le32 Residue;
+ __u8 Status;
+};
+
+#define US_BULK_CS_WRAP_LEN 13
+#define US_BULK_CS_SIGN 0x53425355
+#define US_BULK_STAT_OK 0
+#define US_BULK_STAT_FAIL 1
+#define US_BULK_STAT_PHASE 2
+
+#define US_BULK_RESET_REQUEST 0xff
+#define US_BULK_GET_MAX_LUN 0xfe
+
+#endif
diff --git a/include/linux/usb/tmc.h b/include/linux/usb/tmc.h
new file mode 100644
index 0000000..c045ae1
--- /dev/null
+++ b/include/linux/usb/tmc.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
+ * Copyright (C) 2008 Novell, Inc.
+ * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This file holds USB constants defined by the USB Device Class
+ * Definition for Test and Measurement devices published by the USB-IF.
+ *
+ * It also has the ioctl definitions for the usbtmc kernel driver that
+ * userspace needs to know about.
+ */
+
+#ifndef __LINUX_USB_TMC_H
+#define __LINUX_USB_TMC_H
+
+/* USB TMC status values */
+#define USBTMC_STATUS_SUCCESS 0x01
+#define USBTMC_STATUS_PENDING 0x02
+#define USBTMC_STATUS_FAILED 0x80
+#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81
+#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82
+#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83
+
+/* USB TMC requests values */
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4
+#define USBTMC_REQUEST_INITIATE_CLEAR 5
+#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6
+#define USBTMC_REQUEST_GET_CAPABILITIES 7
+#define USBTMC_REQUEST_INDICATOR_PULSE 64
+
+/* Request values for USBTMC driver's ioctl entry point */
+#define USBTMC_IOC_NR 91
+#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1)
+#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2)
+#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3)
+#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4)
+#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6)
+#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7)
+
+#endif
diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h
new file mode 100644
index 0000000..9a988e4
--- /dev/null
+++ b/include/linux/usb/uas.h
@@ -0,0 +1,69 @@
+#ifndef __USB_UAS_H__
+#define __USB_UAS_H__
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+/* Common header for all IUs */
+struct iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+};
+
+enum {
+ IU_ID_COMMAND = 0x01,
+ IU_ID_STATUS = 0x03,
+ IU_ID_RESPONSE = 0x04,
+ IU_ID_TASK_MGMT = 0x05,
+ IU_ID_READ_READY = 0x06,
+ IU_ID_WRITE_READY = 0x07,
+};
+
+struct command_iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+ __u8 prio_attr;
+ __u8 rsvd5;
+ __u8 len;
+ __u8 rsvd7;
+ struct scsi_lun lun;
+ __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */
+};
+
+/*
+ * Also used for the Read Ready and Write Ready IUs since they have the
+ * same first four bytes
+ */
+struct sense_iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+ __be16 status_qual;
+ __u8 status;
+ __u8 rsvd7[7];
+ __be16 len;
+ __u8 sense[SCSI_SENSE_BUFFERSIZE];
+};
+
+struct usb_pipe_usage_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bPipeID;
+ __u8 Reserved;
+} __attribute__((__packed__));
+
+enum {
+ CMD_PIPE_ID = 1,
+ STATUS_PIPE_ID = 2,
+ DATA_IN_PIPE_ID = 3,
+ DATA_OUT_PIPE_ID = 4,
+
+ UAS_SIMPLE_TAG = 0,
+ UAS_HEAD_TAG = 1,
+ UAS_ORDERED_TAG = 2,
+ UAS_ACA = 4,
+};
+#endif
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
new file mode 100644
index 0000000..36b1f10
--- /dev/null
+++ b/include/linux/usb/ulpi.h
@@ -0,0 +1,154 @@
+/*
+ * ulpi.h -- ULPI defines and function prorotypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * version 2 of that License.
+ */
+
+#ifndef __LINUX_USB_ULPI_H
+#define __LINUX_USB_ULPI_H
+
+#include <linux/usb/otg.h>
+
+#define ULPI_OTG_ID_PULLUP (1 << 0)
+#define ULPI_OTG_DP_PULLDOWN_DIS (1 << 1)
+#define ULPI_OTG_DM_PULLDOWN_DIS (1 << 2)
+#define ULPI_OTG_DISCHRGVBUS (1 << 3)
+#define ULPI_OTG_CHRGVBUS (1 << 4)
+#define ULPI_OTG_DRVVBUS (1 << 5)
+#define ULPI_OTG_DRVVBUS_EXT (1 << 6)
+#define ULPI_OTG_EXTVBUSIND (1 << 7)
+
+#define ULPI_IC_6PIN_SERIAL (1 << 8)
+#define ULPI_IC_3PIN_SERIAL (1 << 9)
+#define ULPI_IC_CARKIT (1 << 10)
+#define ULPI_IC_CLKSUSPM (1 << 11)
+#define ULPI_IC_AUTORESUME (1 << 12)
+#define ULPI_IC_EXTVBUS_INDINV (1 << 13)
+#define ULPI_IC_IND_PASSTHRU (1 << 14)
+#define ULPI_IC_PROTECT_DIS (1 << 15)
+
+#define ULPI_FC_HS (1 << 16)
+#define ULPI_FC_FS (1 << 17)
+#define ULPI_FC_LS (1 << 18)
+#define ULPI_FC_FS4LS (1 << 19)
+#define ULPI_FC_TERMSEL (1 << 20)
+#define ULPI_FC_OP_NORM (1 << 21)
+#define ULPI_FC_OP_NODRV (1 << 22)
+#define ULPI_FC_OP_DIS_NRZI (1 << 23)
+#define ULPI_FC_OP_NSYNC_NEOP (1 << 24)
+#define ULPI_FC_RST (1 << 25)
+#define ULPI_FC_SUSPM (1 << 26)
+
+
+#define ULPI_SET(a) (a + 1)
+#define ULPI_CLR(a) (a + 2)
+
+
+#define ULPI_VENDOR_ID_LOW 0x00
+#define ULPI_VENDOR_ID_HIGH 0x01
+#define ULPI_PRODUCT_ID_LOW 0x02
+#define ULPI_PRODUCT_ID_HIGH 0x03
+#define ULPI_FUNC_CTRL 0x04
+#define ULPI_IFC_CTRL 0x07
+#define ULPI_OTG_CTRL 0x0a
+#define ULPI_USB_INT_EN_RISE 0x0d
+#define ULPI_USB_INT_EN_FALL 0x10
+#define ULPI_USB_INT_STS 0x13
+#define ULPI_USB_INT_LATCH 0x14
+#define ULPI_DEBUG 0x15
+#define ULPI_SCRATCH 0x16
+#define ULPI_CARCIT_CTRL 0x19
+#define ULPI_CARCIT_INT_DELAY 0x1c
+#define ULPI_CARCIT_INT_EN 0x1d
+#define ULPI_CARCIT_INT_STS 0x20
+#define ULPI_CARCIT_INT_LATCH 0x21
+#define ULPI_CARCIT_PLS_CTRL 0x22
+#define ULPI_TX_POS_WIDTH 0x25
+#define ULPI_TX_NEG_WIDTH 0x26
+#define ULPI_POLARITY_RECOVERY 0x27
+#define ULPI_ACCESS_EXTENDED 0x2f
+#define ULPI_VENDOR_SPECIFIC 0x30
+#define ULPI_EXT_VENDOR_SPECIFIC 0x80
+
+
+
+#define ULPI_FUNC_CTRL_XCVRSEL (1 << 0)
+#define ULPI_FUNC_CTRL_XCVRSEL_MASK (3 << 0)
+#define ULPI_FUNC_CTRL_HIGH_SPEED (0 << 0)
+#define ULPI_FUNC_CTRL_FULL_SPEED (1 << 0)
+#define ULPI_FUNC_CTRL_LOW_SPEED (2 << 0)
+#define ULPI_FUNC_CTRL_FS4LS (3 << 0)
+#define ULPI_FUNC_CTRL_TERMSELECT (1 << 2)
+#define ULPI_FUNC_CTRL_OPMODE (1 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_MASK (3 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (1 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (2 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (3 << 3)
+#define ULPI_FUNC_CTRL_RESET (1 << 5)
+#define ULPI_FUNC_CTRL_SUSPENDM (1 << 6)
+
+#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE (1 << 0)
+#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE (1 << 1)
+#define ULPI_IFC_CTRL_CARKITMODE (1 << 2)
+#define ULPI_IFC_CTRL_CLOCKSUSPENDM (1 << 3)
+#define ULPI_IFC_CTRL_AUTORESUME (1 << 4)
+#define ULPI_IFC_CTRL_EXTERNAL_VBUS (1 << 5)
+#define ULPI_IFC_CTRL_PASSTHRU (1 << 6)
+#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE (1 << 7)
+
+#define ULPI_OTG_CTRL_ID_PULLUP (1 << 0)
+#define ULPI_OTG_CTRL_DP_PULLDOWN (1 << 1)
+#define ULPI_OTG_CTRL_DM_PULLDOWN (1 << 2)
+#define ULPI_OTG_CTRL_DISCHRGVBUS (1 << 3)
+#define ULPI_OTG_CTRL_CHRGVBUS (1 << 4)
+#define ULPI_OTG_CTRL_DRVVBUS (1 << 5)
+#define ULPI_OTG_CTRL_DRVVBUS_EXT (1 << 6)
+#define ULPI_OTG_CTRL_EXTVBUSIND (1 << 7)
+
+#define ULPI_INT_HOST_DISCONNECT (1 << 0)
+#define ULPI_INT_VBUS_VALID (1 << 1)
+#define ULPI_INT_SESS_VALID (1 << 2)
+#define ULPI_INT_SESS_END (1 << 3)
+#define ULPI_INT_IDGRD (1 << 4)
+#define ULPI_INT_DP (1 << 7)
+
+#define ULPI_DEBUG_LINESTATE0 (1 << 0)
+#define ULPI_DEBUG_LINESTATE1 (1 << 1)
+
+#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0)
+#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1)
+#define ULPI_CARKIT_CTRL_TXDEN (1 << 2)
+#define ULPI_CARKIT_CTRL_RXDEN (1 << 3)
+#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4)
+#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5)
+#define ULPI_CARKIT_CTRL_MICEN (1 << 6)
+
+#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0)
+#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1)
+#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2)
+#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3)
+#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4)
+
+#define ULPI_CARKIT_INT_IDFLOAT (1 << 0)
+#define ULPI_CARKIT_INT_CARINTDET (1 << 1)
+#define ULPI_CARKIT_INT_DP (1 << 2)
+
+#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0)
+#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1)
+#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2)
+#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3)
+
+
+struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
+ unsigned int flags);
+
+#ifdef CONFIG_USB_ULPI_VIEWPORT
+extern struct usb_phy_io_ops ulpi_viewport_access_ops;
+#endif
+
+#endif
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
new file mode 100644
index 0000000..30dd10e
--- /dev/null
+++ b/include/linux/usb/usbnet.h
@@ -0,0 +1,212 @@
+/*
+ * USB Networking Link Interface
+ *
+ * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_USBNET_H
+#define __LINUX_USB_USBNET_H
+
+struct usbnet {
+
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ struct driver_info *driver_info;
+ const char *driver_name;
+ void *driver_priv;
+ wait_queue_head_t *wait;
+ struct mutex phy_mutex;
+ unsigned char suspend_count;
+
+
+ unsigned in, out;
+ struct usb_host_endpoint *status;
+ unsigned maxpacket;
+ struct timer_list delay;
+
+
+ struct net_device *net;
+ int msg_enable;
+ unsigned long data[5];
+ u32 xid;
+ u32 hard_mtu;
+ size_t rx_urb_size;
+ struct mii_if_info mii;
+
+
+ struct sk_buff_head rxq;
+ struct sk_buff_head txq;
+ struct sk_buff_head done;
+ struct sk_buff_head rxq_pause;
+ struct urb *interrupt;
+ struct usb_anchor deferred;
+ struct work_struct bh_w;
+
+ struct work_struct kevent;
+ unsigned long flags;
+# define EVENT_TX_HALT 0
+# define EVENT_RX_HALT 1
+# define EVENT_RX_MEMORY 2
+# define EVENT_STS_SPLIT 3
+# define EVENT_LINK_RESET 4
+# define EVENT_RX_PAUSED 5
+# define EVENT_DEV_WAKING 6
+# define EVENT_DEV_ASLEEP 7
+# define EVENT_DEV_OPEN 8
+};
+
+static inline struct usb_driver *driver_of(struct usb_interface *intf)
+{
+ return to_usb_driver(intf->dev.driver);
+}
+
+struct driver_info {
+ char *description;
+
+ int flags;
+#define FLAG_FRAMING_NC 0x0001
+#define FLAG_FRAMING_GL 0x0002
+#define FLAG_FRAMING_Z 0x0004
+#define FLAG_FRAMING_RN 0x0008
+
+#define FLAG_NO_SETINT 0x0010
+#define FLAG_ETHER 0x0020
+
+#define FLAG_FRAMING_AX 0x0040
+#define FLAG_WLAN 0x0080
+#define FLAG_AVOID_UNLINK_URBS 0x0100
+#define FLAG_SEND_ZLP 0x0200
+#define FLAG_WWAN 0x0400
+
+#define FLAG_LINK_INTR 0x0800
+
+#define FLAG_POINTTOPOINT 0x1000
+
+#define FLAG_MULTI_PACKET 0x2000
+#define FLAG_RX_ASSEMBLE 0x4000
+
+
+ int (*bind)(struct usbnet *, struct usb_interface *);
+
+
+ void (*unbind)(struct usbnet *, struct usb_interface *);
+
+
+ int (*reset)(struct usbnet *);
+
+
+ int (*stop)(struct usbnet *);
+
+
+ int (*check_connect)(struct usbnet *);
+
+
+ int (*manage_power)(struct usbnet *, int);
+
+
+ void (*status)(struct usbnet *, struct urb *);
+
+
+ int (*link_reset)(struct usbnet *);
+
+
+ int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
+
+
+ struct sk_buff *(*tx_fixup)(struct usbnet *dev,
+ struct sk_buff *skb, gfp_t flags);
+
+ int (*early_init)(struct usbnet *dev);
+
+
+ void (*indication)(struct usbnet *dev, void *ind, int indlen);
+
+
+ int in;
+ int out;
+
+ unsigned long data;
+};
+
+extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
+extern int usbnet_suspend(struct usb_interface *, pm_message_t);
+extern int usbnet_resume(struct usb_interface *);
+extern void usbnet_disconnect(struct usb_interface *);
+
+
+struct cdc_state {
+ struct usb_cdc_header_desc *header;
+ struct usb_cdc_union_desc *u;
+ struct usb_cdc_ether_desc *ether;
+ struct usb_interface *control;
+ struct usb_interface *data;
+};
+
+extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
+extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_status(struct usbnet *, struct urb *);
+
+#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
+ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+ |USB_CDC_PACKET_TYPE_PROMISCUOUS \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
+
+
+enum skb_state {
+ illegal = 0,
+ tx_start, tx_done,
+ rx_start, rx_done, rx_cleanup,
+ unlink_start
+};
+
+struct skb_data {
+ struct urb *urb;
+ struct usbnet *dev;
+ enum skb_state state;
+ size_t length;
+};
+
+extern int usbnet_open(struct net_device *net);
+extern int usbnet_stop(struct net_device *net);
+extern netdev_tx_t usbnet_start_xmit(struct sk_buff *skb,
+ struct net_device *net);
+extern void usbnet_tx_timeout(struct net_device *net);
+extern int usbnet_change_mtu(struct net_device *net, int new_mtu);
+
+extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern int usbnet_get_ethernet_addr(struct usbnet *, int);
+extern void usbnet_defer_kevent(struct usbnet *, int);
+extern void usbnet_skb_return(struct usbnet *, struct sk_buff *);
+extern void usbnet_unlink_rx_urbs(struct usbnet *);
+
+extern void usbnet_pause_rx(struct usbnet *);
+extern void usbnet_resume_rx(struct usbnet *);
+extern void usbnet_purge_paused_rxq(struct usbnet *);
+
+extern int usbnet_get_settings(struct net_device *net,
+ struct ethtool_cmd *cmd);
+extern int usbnet_set_settings(struct net_device *net,
+ struct ethtool_cmd *cmd);
+extern u32 usbnet_get_link(struct net_device *net);
+extern u32 usbnet_get_msglevel(struct net_device *);
+extern void usbnet_set_msglevel(struct net_device *, u32);
+extern void usbnet_get_drvinfo(struct net_device *, struct ethtool_drvinfo *);
+extern int usbnet_nway_reset(struct net_device *net);
+
+#endif
diff --git a/include/linux/usb/video.h b/include/linux/usb/video.h
new file mode 100644
index 0000000..3b3b95e
--- /dev/null
+++ b/include/linux/usb/video.h
@@ -0,0 +1,568 @@
+/*
+ * USB Video Class definitions.
+ *
+ * Copyright (C) 2009 Laurent Pinchart <laurent.pinchart@skynet.be>
+ *
+ * This file holds USB constants and structures defined by the USB Device
+ * Class Definition for Video Devices. Unless otherwise stated, comments
+ * below reference relevant sections of the USB Video Class 1.1 specification
+ * available at
+ *
+ * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip
+ */
+
+#ifndef __LINUX_USB_VIDEO_H
+#define __LINUX_USB_VIDEO_H
+
+#include <linux/types.h>
+
+/* --------------------------------------------------------------------------
+ * UVC constants
+ */
+
+/* A.2. Video Interface Subclass Codes */
+#define UVC_SC_UNDEFINED 0x00
+#define UVC_SC_VIDEOCONTROL 0x01
+#define UVC_SC_VIDEOSTREAMING 0x02
+#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03
+
+/* A.3. Video Interface Protocol Codes */
+#define UVC_PC_PROTOCOL_UNDEFINED 0x00
+
+/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */
+#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00
+#define UVC_VC_HEADER 0x01
+#define UVC_VC_INPUT_TERMINAL 0x02
+#define UVC_VC_OUTPUT_TERMINAL 0x03
+#define UVC_VC_SELECTOR_UNIT 0x04
+#define UVC_VC_PROCESSING_UNIT 0x05
+#define UVC_VC_EXTENSION_UNIT 0x06
+
+/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */
+#define UVC_VS_UNDEFINED 0x00
+#define UVC_VS_INPUT_HEADER 0x01
+#define UVC_VS_OUTPUT_HEADER 0x02
+#define UVC_VS_STILL_IMAGE_FRAME 0x03
+#define UVC_VS_FORMAT_UNCOMPRESSED 0x04
+#define UVC_VS_FRAME_UNCOMPRESSED 0x05
+#define UVC_VS_FORMAT_MJPEG 0x06
+#define UVC_VS_FRAME_MJPEG 0x07
+#define UVC_VS_FORMAT_MPEG2TS 0x0a
+#define UVC_VS_FORMAT_DV 0x0c
+#define UVC_VS_COLORFORMAT 0x0d
+#define UVC_VS_FORMAT_FRAME_BASED 0x10
+#define UVC_VS_FRAME_FRAME_BASED 0x11
+#define UVC_VS_FORMAT_STREAM_BASED 0x12
+
+/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */
+#define UVC_EP_UNDEFINED 0x00
+#define UVC_EP_GENERAL 0x01
+#define UVC_EP_ENDPOINT 0x02
+#define UVC_EP_INTERRUPT 0x03
+
+/* A.8. Video Class-Specific Request Codes */
+#define UVC_RC_UNDEFINED 0x00
+#define UVC_SET_CUR 0x01
+#define UVC_GET_CUR 0x81
+#define UVC_GET_MIN 0x82
+#define UVC_GET_MAX 0x83
+#define UVC_GET_RES 0x84
+#define UVC_GET_LEN 0x85
+#define UVC_GET_INFO 0x86
+#define UVC_GET_DEF 0x87
+
+/* A.9.1. VideoControl Interface Control Selectors */
+#define UVC_VC_CONTROL_UNDEFINED 0x00
+#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01
+#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02
+
+/* A.9.2. Terminal Control Selectors */
+#define UVC_TE_CONTROL_UNDEFINED 0x00
+
+/* A.9.3. Selector Unit Control Selectors */
+#define UVC_SU_CONTROL_UNDEFINED 0x00
+#define UVC_SU_INPUT_SELECT_CONTROL 0x01
+
+/* A.9.4. Camera Terminal Control Selectors */
+#define UVC_CT_CONTROL_UNDEFINED 0x00
+#define UVC_CT_SCANNING_MODE_CONTROL 0x01
+#define UVC_CT_AE_MODE_CONTROL 0x02
+#define UVC_CT_AE_PRIORITY_CONTROL 0x03
+#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04
+#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05
+#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06
+#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07
+#define UVC_CT_FOCUS_AUTO_CONTROL 0x08
+#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09
+#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a
+#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b
+#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c
+#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d
+#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e
+#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f
+#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10
+#define UVC_CT_PRIVACY_CONTROL 0x11
+
+/* A.9.5. Processing Unit Control Selectors */
+#define UVC_PU_CONTROL_UNDEFINED 0x00
+#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01
+#define UVC_PU_BRIGHTNESS_CONTROL 0x02
+#define UVC_PU_CONTRAST_CONTROL 0x03
+#define UVC_PU_GAIN_CONTROL 0x04
+#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05
+#define UVC_PU_HUE_CONTROL 0x06
+#define UVC_PU_SATURATION_CONTROL 0x07
+#define UVC_PU_SHARPNESS_CONTROL 0x08
+#define UVC_PU_GAMMA_CONTROL 0x09
+#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a
+#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b
+#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c
+#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d
+#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e
+#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f
+#define UVC_PU_HUE_AUTO_CONTROL 0x10
+#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11
+#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12
+
+/* A.9.7. VideoStreaming Interface Control Selectors */
+#define UVC_VS_CONTROL_UNDEFINED 0x00
+#define UVC_VS_PROBE_CONTROL 0x01
+#define UVC_VS_COMMIT_CONTROL 0x02
+#define UVC_VS_STILL_PROBE_CONTROL 0x03
+#define UVC_VS_STILL_COMMIT_CONTROL 0x04
+#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05
+#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06
+#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07
+#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08
+#define UVC_VS_SYNC_DELAY_CONTROL 0x09
+
+/* B.1. USB Terminal Types */
+#define UVC_TT_VENDOR_SPECIFIC 0x0100
+#define UVC_TT_STREAMING 0x0101
+
+/* B.2. Input Terminal Types */
+#define UVC_ITT_VENDOR_SPECIFIC 0x0200
+#define UVC_ITT_CAMERA 0x0201
+#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202
+
+/* B.3. Output Terminal Types */
+#define UVC_OTT_VENDOR_SPECIFIC 0x0300
+#define UVC_OTT_DISPLAY 0x0301
+#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302
+
+/* B.4. External Terminal Types */
+#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400
+#define UVC_COMPOSITE_CONNECTOR 0x0401
+#define UVC_SVIDEO_CONNECTOR 0x0402
+#define UVC_COMPONENT_CONNECTOR 0x0403
+
+/* 2.4.2.2. Status Packet Type */
+#define UVC_STATUS_TYPE_CONTROL 1
+#define UVC_STATUS_TYPE_STREAMING 2
+
+/* 2.4.3.3. Payload Header Information */
+#define UVC_STREAM_EOH (1 << 7)
+#define UVC_STREAM_ERR (1 << 6)
+#define UVC_STREAM_STI (1 << 5)
+#define UVC_STREAM_RES (1 << 4)
+#define UVC_STREAM_SCR (1 << 3)
+#define UVC_STREAM_PTS (1 << 2)
+#define UVC_STREAM_EOF (1 << 1)
+#define UVC_STREAM_FID (1 << 0)
+
+/* 4.1.2. Control Capabilities */
+#define UVC_CONTROL_CAP_GET (1 << 0)
+#define UVC_CONTROL_CAP_SET (1 << 1)
+#define UVC_CONTROL_CAP_DISABLED (1 << 2)
+#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3)
+#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4)
+
+/* ------------------------------------------------------------------------
+ * UVC structures
+ */
+
+/* All UVC descriptors have these 3 fields at the beginning */
+struct uvc_descriptor_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+} __attribute__((packed));
+
+/* 3.7.2. Video Control Interface Header Descriptor */
+struct uvc_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u16 bcdUVC;
+ __u16 wTotalLength;
+ __u32 dwClockFrequency;
+ __u8 bInCollection;
+ __u8 baInterfaceNr[];
+} __attribute__((__packed__));
+
+#define UVC_DT_HEADER_SIZE(n) (12+(n))
+
+#define UVC_HEADER_DESCRIPTOR(n) \
+ uvc_header_descriptor_##n
+
+#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \
+struct UVC_HEADER_DESCRIPTOR(n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u16 bcdUVC; \
+ __u16 wTotalLength; \
+ __u32 dwClockFrequency; \
+ __u8 bInCollection; \
+ __u8 baInterfaceNr[n]; \
+} __attribute__ ((packed))
+
+/* 3.7.2.1. Input Terminal Descriptor */
+struct uvc_input_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 iTerminal;
+} __attribute__((__packed__));
+
+#define UVC_DT_INPUT_TERMINAL_SIZE 8
+
+/* 3.7.2.2. Output Terminal Descriptor */
+struct uvc_output_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 bSourceID;
+ __u8 iTerminal;
+} __attribute__((__packed__));
+
+#define UVC_DT_OUTPUT_TERMINAL_SIZE 9
+
+/* 3.7.2.3. Camera Terminal Descriptor */
+struct uvc_camera_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 iTerminal;
+ __u16 wObjectiveFocalLengthMin;
+ __u16 wObjectiveFocalLengthMax;
+ __u16 wOcularFocalLength;
+ __u8 bControlSize;
+ __u8 bmControls[3];
+} __attribute__((__packed__));
+
+#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n))
+
+/* 3.7.2.4. Selector Unit Descriptor */
+struct uvc_selector_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bUnitID;
+ __u8 bNrInPins;
+ __u8 baSourceID[0];
+ __u8 iSelector;
+} __attribute__((__packed__));
+
+#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n))
+
+#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \
+ uvc_selector_unit_descriptor_##n
+
+#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \
+struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bUnitID; \
+ __u8 bNrInPins; \
+ __u8 baSourceID[n]; \
+ __u8 iSelector; \
+} __attribute__ ((packed))
+
+/* 3.7.2.5. Processing Unit Descriptor */
+struct uvc_processing_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bUnitID;
+ __u8 bSourceID;
+ __u16 wMaxMultiplier;
+ __u8 bControlSize;
+ __u8 bmControls[2];
+ __u8 iProcessing;
+} __attribute__((__packed__));
+
+#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n))
+
+/* 3.7.2.6. Extension Unit Descriptor */
+struct uvc_extension_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bUnitID;
+ __u8 guidExtensionCode[16];
+ __u8 bNumControls;
+ __u8 bNrInPins;
+ __u8 baSourceID[0];
+ __u8 bControlSize;
+ __u8 bmControls[0];
+ __u8 iExtension;
+} __attribute__((__packed__));
+
+#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n))
+
+#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
+ uvc_extension_unit_descriptor_##p_##n
+
+#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \
+struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bUnitID; \
+ __u8 guidExtensionCode[16]; \
+ __u8 bNumControls; \
+ __u8 bNrInPins; \
+ __u8 baSourceID[p]; \
+ __u8 bControlSize; \
+ __u8 bmControls[n]; \
+ __u8 iExtension; \
+} __attribute__ ((packed))
+
+/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */
+struct uvc_control_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u16 wMaxTransferSize;
+} __attribute__((__packed__));
+
+#define UVC_DT_CONTROL_ENDPOINT_SIZE 5
+
+/* 3.9.2.1. Input Header Descriptor */
+struct uvc_input_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bNumFormats;
+ __u16 wTotalLength;
+ __u8 bEndpointAddress;
+ __u8 bmInfo;
+ __u8 bTerminalLink;
+ __u8 bStillCaptureMethod;
+ __u8 bTriggerSupport;
+ __u8 bTriggerUsage;
+ __u8 bControlSize;
+ __u8 bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p))
+
+#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
+ uvc_input_header_descriptor_##n_##p
+
+#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \
+struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bNumFormats; \
+ __u16 wTotalLength; \
+ __u8 bEndpointAddress; \
+ __u8 bmInfo; \
+ __u8 bTerminalLink; \
+ __u8 bStillCaptureMethod; \
+ __u8 bTriggerSupport; \
+ __u8 bTriggerUsage; \
+ __u8 bControlSize; \
+ __u8 bmaControls[p][n]; \
+} __attribute__ ((packed))
+
+/* 3.9.2.2. Output Header Descriptor */
+struct uvc_output_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bNumFormats;
+ __u16 wTotalLength;
+ __u8 bEndpointAddress;
+ __u8 bTerminalLink;
+ __u8 bControlSize;
+ __u8 bmaControls[];
+} __attribute__((__packed__));
+
+#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p))
+
+#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
+ uvc_output_header_descriptor_##n_##p
+
+#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \
+struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bNumFormats; \
+ __u16 wTotalLength; \
+ __u8 bEndpointAddress; \
+ __u8 bTerminalLink; \
+ __u8 bControlSize; \
+ __u8 bmaControls[p][n]; \
+} __attribute__ ((packed))
+
+/* 3.9.2.6. Color matching descriptor */
+struct uvc_color_matching_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bColorPrimaries;
+ __u8 bTransferCharacteristics;
+ __u8 bMatrixCoefficients;
+} __attribute__((__packed__));
+
+#define UVC_DT_COLOR_MATCHING_SIZE 6
+
+/* 4.3.1.1. Video Probe and Commit Controls */
+struct uvc_streaming_control {
+ __u16 bmHint;
+ __u8 bFormatIndex;
+ __u8 bFrameIndex;
+ __u32 dwFrameInterval;
+ __u16 wKeyFrameRate;
+ __u16 wPFrameRate;
+ __u16 wCompQuality;
+ __u16 wCompWindowSize;
+ __u16 wDelay;
+ __u32 dwMaxVideoFrameSize;
+ __u32 dwMaxPayloadTransferSize;
+ __u32 dwClockFrequency;
+ __u8 bmFramingInfo;
+ __u8 bPreferedVersion;
+ __u8 bMinVersion;
+ __u8 bMaxVersion;
+} __attribute__((__packed__));
+
+/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */
+struct uvc_format_uncompressed {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bFormatIndex;
+ __u8 bNumFrameDescriptors;
+ __u8 guidFormat[16];
+ __u8 bBitsPerPixel;
+ __u8 bDefaultFrameIndex;
+ __u8 bAspectRatioX;
+ __u8 bAspectRatioY;
+ __u8 bmInterfaceFlags;
+ __u8 bCopyProtect;
+} __attribute__((__packed__));
+
+#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27
+
+/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */
+struct uvc_frame_uncompressed {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bFrameIndex;
+ __u8 bmCapabilities;
+ __u16 wWidth;
+ __u16 wHeight;
+ __u32 dwMinBitRate;
+ __u32 dwMaxBitRate;
+ __u32 dwMaxVideoFrameBufferSize;
+ __u32 dwDefaultFrameInterval;
+ __u8 bFrameIntervalType;
+ __u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n))
+
+#define UVC_FRAME_UNCOMPRESSED(n) \
+ uvc_frame_uncompressed_##n
+
+#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \
+struct UVC_FRAME_UNCOMPRESSED(n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bFrameIndex; \
+ __u8 bmCapabilities; \
+ __u16 wWidth; \
+ __u16 wHeight; \
+ __u32 dwMinBitRate; \
+ __u32 dwMaxBitRate; \
+ __u32 dwMaxVideoFrameBufferSize; \
+ __u32 dwDefaultFrameInterval; \
+ __u8 bFrameIntervalType; \
+ __u32 dwFrameInterval[n]; \
+} __attribute__ ((packed))
+
+/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */
+struct uvc_format_mjpeg {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bFormatIndex;
+ __u8 bNumFrameDescriptors;
+ __u8 bmFlags;
+ __u8 bDefaultFrameIndex;
+ __u8 bAspectRatioX;
+ __u8 bAspectRatioY;
+ __u8 bmInterfaceFlags;
+ __u8 bCopyProtect;
+} __attribute__((__packed__));
+
+#define UVC_DT_FORMAT_MJPEG_SIZE 11
+
+/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */
+struct uvc_frame_mjpeg {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubType;
+ __u8 bFrameIndex;
+ __u8 bmCapabilities;
+ __u16 wWidth;
+ __u16 wHeight;
+ __u32 dwMinBitRate;
+ __u32 dwMaxBitRate;
+ __u32 dwMaxVideoFrameBufferSize;
+ __u32 dwDefaultFrameInterval;
+ __u8 bFrameIntervalType;
+ __u32 dwFrameInterval[];
+} __attribute__((__packed__));
+
+#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n))
+
+#define UVC_FRAME_MJPEG(n) \
+ uvc_frame_mjpeg_##n
+
+#define DECLARE_UVC_FRAME_MJPEG(n) \
+struct UVC_FRAME_MJPEG(n) { \
+ __u8 bLength; \
+ __u8 bDescriptorType; \
+ __u8 bDescriptorSubType; \
+ __u8 bFrameIndex; \
+ __u8 bmCapabilities; \
+ __u16 wWidth; \
+ __u16 wHeight; \
+ __u32 dwMinBitRate; \
+ __u32 dwMaxBitRate; \
+ __u32 dwMaxVideoFrameBufferSize; \
+ __u32 dwDefaultFrameInterval; \
+ __u8 bFrameIntervalType; \
+ __u32 dwFrameInterval[n]; \
+} __attribute__ ((packed))
+
+#endif /* __LINUX_USB_VIDEO_H */
+
diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h
new file mode 100644
index 0000000..f9dec37
--- /dev/null
+++ b/include/linux/usb/wusb-wa.h
@@ -0,0 +1,272 @@
+/*
+ * Wireless USB Wire Adapter constants and structures.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation.
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ *
+ * References:
+ * [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
+ */
+#ifndef __LINUX_USB_WUSB_WA_H
+#define __LINUX_USB_WUSB_WA_H
+
+/**
+ * Radio Command Request for the Radio Control Interface
+ *
+ * Radio Control Interface command and event codes are the same as
+ * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
+ */
+enum {
+ WA_EXEC_RC_CMD = 40, /* Radio Control command Request */
+};
+
+/* Wireless Adapter Requests ([WUSB] table 8-51) */
+enum {
+ WUSB_REQ_ADD_MMC_IE = 20,
+ WUSB_REQ_REMOVE_MMC_IE = 21,
+ WUSB_REQ_SET_NUM_DNTS = 22,
+ WUSB_REQ_SET_CLUSTER_ID = 23,
+ WUSB_REQ_SET_DEV_INFO = 24,
+ WUSB_REQ_GET_TIME = 25,
+ WUSB_REQ_SET_STREAM_IDX = 26,
+ WUSB_REQ_SET_WUSB_MAS = 27,
+ WUSB_REQ_CHAN_STOP = 28,
+};
+
+
+/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
+enum {
+ WUSB_TIME_ADJ = 0,
+ WUSB_TIME_BPST = 1,
+ WUSB_TIME_WUSB = 2,
+};
+
+enum {
+ WA_ENABLE = 0x01,
+ WA_RESET = 0x02,
+ RPIPE_PAUSE = 0x1,
+};
+
+/* Responses from Get Status request ([WUSB] section 8.3.1.6) */
+enum {
+ WA_STATUS_ENABLED = 0x01,
+ WA_STATUS_RESETTING = 0x02
+};
+
+enum rpipe_crs {
+ RPIPE_CRS_CTL = 0x01,
+ RPIPE_CRS_ISO = 0x02,
+ RPIPE_CRS_BULK = 0x04,
+ RPIPE_CRS_INTR = 0x08
+};
+
+/**
+ * RPipe descriptor ([WUSB] section 8.5.2.11)
+ *
+ * FIXME: explain rpipes
+ */
+struct usb_rpipe_descriptor {
+ u8 bLength;
+ u8 bDescriptorType;
+ __le16 wRPipeIndex;
+ __le16 wRequests;
+ __le16 wBlocks; /* rw if 0 */
+ __le16 wMaxPacketSize; /* rw? */
+ u8 bHSHubAddress; /* reserved: 0 */
+ u8 bHSHubPort; /* ??? FIXME ??? */
+ u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */
+ u8 bDeviceAddress; /* rw: Target device address */
+ u8 bEndpointAddress; /* rw: Target EP address */
+ u8 bDataSequence; /* ro: Current Data sequence */
+ __le32 dwCurrentWindow; /* ro */
+ u8 bMaxDataSequence; /* ro?: max supported seq */
+ u8 bInterval; /* rw: */
+ u8 bOverTheAirInterval; /* rw: */
+ u8 bmAttribute; /* ro? */
+ u8 bmCharacteristics; /* ro? enum rpipe_attr, supported xsactions */
+ u8 bmRetryOptions; /* rw? */
+ __le16 wNumTransactionErrors; /* rw */
+} __attribute__ ((packed));
+
+/**
+ * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
+ *
+ * These are the notifications coming on the notification endpoint of
+ * an HWA and a DWA.
+ */
+enum wa_notif_type {
+ DWA_NOTIF_RWAKE = 0x91,
+ DWA_NOTIF_PORTSTATUS = 0x92,
+ WA_NOTIF_TRANSFER = 0x93,
+ HWA_NOTIF_BPST_ADJ = 0x94,
+ HWA_NOTIF_DN = 0x95,
+};
+
+/**
+ * Wire Adapter notification header
+ *
+ * Notifications coming from a wire adapter use a common header
+ * defined in [WUSB] sections 8.4.5 & 8.5.4.
+ */
+struct wa_notif_hdr {
+ u8 bLength;
+ u8 bNotifyType; /* enum wa_notif_type */
+} __attribute__((packed));
+
+/**
+ * HWA DN Received notification [(WUSB] section 8.5.4.2)
+ *
+ * The DNData is specified in WUSB1.0[7.6]. For each device
+ * notification we received, we just need to dispatch it.
+ *
+ * @dndata: this is really an array of notifications, but all start
+ * with the same header.
+ */
+struct hwa_notif_dn {
+ struct wa_notif_hdr hdr;
+ u8 bSourceDeviceAddr; /* from errata 2005/07 */
+ u8 bmAttributes;
+ struct wusb_dn_hdr dndata[];
+} __attribute__((packed));
+
+/* [WUSB] section 8.3.3 */
+enum wa_xfer_type {
+ WA_XFER_TYPE_CTL = 0x80,
+ WA_XFER_TYPE_BI = 0x81, /* bulk/interrupt */
+ WA_XFER_TYPE_ISO = 0x82,
+ WA_XFER_RESULT = 0x83,
+ WA_XFER_ABORT = 0x84,
+};
+
+/* [WUSB] section 8.3.3 */
+struct wa_xfer_hdr {
+ u8 bLength; /* 0x18 */
+ u8 bRequestType; /* 0x80 WA_REQUEST_TYPE_CTL */
+ __le16 wRPipe; /* RPipe index */
+ __le32 dwTransferID; /* Host-assigned ID */
+ __le32 dwTransferLength; /* Length of data to xfer */
+ u8 bTransferSegment;
+} __attribute__((packed));
+
+struct wa_xfer_ctl {
+ struct wa_xfer_hdr hdr;
+ u8 bmAttribute;
+ __le16 wReserved;
+ struct usb_ctrlrequest baSetupData;
+} __attribute__((packed));
+
+struct wa_xfer_bi {
+ struct wa_xfer_hdr hdr;
+ u8 bReserved;
+ __le16 wReserved;
+} __attribute__((packed));
+
+struct wa_xfer_hwaiso {
+ struct wa_xfer_hdr hdr;
+ u8 bReserved;
+ __le16 wPresentationTime;
+ __le32 dwNumOfPackets;
+ /* FIXME: u8 pktdata[]? */
+} __attribute__((packed));
+
+/* [WUSB] section 8.3.3.5 */
+struct wa_xfer_abort {
+ u8 bLength;
+ u8 bRequestType;
+ __le16 wRPipe; /* RPipe index */
+ __le32 dwTransferID; /* Host-assigned ID */
+} __attribute__((packed));
+
+/**
+ * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
+ *
+ */
+struct wa_notif_xfer {
+ struct wa_notif_hdr hdr;
+ u8 bEndpoint;
+ u8 Reserved;
+} __attribute__((packed));
+
+/** Transfer result basic codes [WUSB] table 8-15 */
+enum {
+ WA_XFER_STATUS_SUCCESS,
+ WA_XFER_STATUS_HALTED,
+ WA_XFER_STATUS_DATA_BUFFER_ERROR,
+ WA_XFER_STATUS_BABBLE,
+ WA_XFER_RESERVED,
+ WA_XFER_STATUS_NOT_FOUND,
+ WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
+ WA_XFER_STATUS_TRANSACTION_ERROR,
+ WA_XFER_STATUS_ABORTED,
+ WA_XFER_STATUS_RPIPE_NOT_READY,
+ WA_XFER_INVALID_FORMAT,
+ WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
+ WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
+};
+
+/** [WUSB] section 8.3.3.4 */
+struct wa_xfer_result {
+ struct wa_notif_hdr hdr;
+ __le32 dwTransferID;
+ __le32 dwTransferLength;
+ u8 bTransferSegment;
+ u8 bTransferStatus;
+ __le32 dwNumOfPackets;
+} __attribute__((packed));
+
+/**
+ * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
+ *
+ * NOTE: u16 fields are read Little Endian from the hardware.
+ *
+ * @bNumPorts is the original max number of devices that the host can
+ * connect; we might chop this so the stack can handle
+ * it. In case you need to access it, use wusbhc->ports_max
+ * if it is a Wireless USB WA.
+ */
+struct usb_wa_descriptor {
+ u8 bLength;
+ u8 bDescriptorType;
+ u16 bcdWAVersion;
+ u8 bNumPorts; /* don't use!! */
+ u8 bmAttributes; /* Reserved == 0 */
+ u16 wNumRPipes;
+ u16 wRPipeMaxBlock;
+ u8 bRPipeBlockSize;
+ u8 bPwrOn2PwrGood;
+ u8 bNumMMCIEs;
+ u8 DeviceRemovable; /* FIXME: in DWA this is up to 16 bytes */
+} __attribute__((packed));
+
+/**
+ * HWA Device Information Buffer (WUSB1.0[T8.54])
+ */
+struct hwa_dev_info {
+ u8 bmDeviceAvailability[32]; /* FIXME: ignored for now */
+ u8 bDeviceAddress;
+ __le16 wPHYRates;
+ u8 bmDeviceAttribute;
+} __attribute__((packed));
+
+#endif /* #ifndef __LINUX_USB_WUSB_WA_H */
diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h
new file mode 100644
index 0000000..0c4d4ca
--- /dev/null
+++ b/include/linux/usb/wusb.h
@@ -0,0 +1,375 @@
+/*
+ * Wireless USB Standard Definitions
+ * Event Size Tables
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ */
+
+#ifndef __WUSB_H__
+#define __WUSB_H__
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/uwb/spec.h>
+#include <linux/usb/ch9.h>
+#include <linux/param.h>
+
+/**
+ * WUSB Information Element header
+ *
+ * I don't know why, they decided to make it different to the MBOA MAC
+ * IE Header; beats me.
+ */
+struct wuie_hdr {
+ u8 bLength;
+ u8 bIEIdentifier;
+} __attribute__((packed));
+
+enum {
+ WUIE_ID_WCTA = 0x80,
+ WUIE_ID_CONNECTACK,
+ WUIE_ID_HOST_INFO,
+ WUIE_ID_CHANGE_ANNOUNCE,
+ WUIE_ID_DEVICE_DISCONNECT,
+ WUIE_ID_HOST_DISCONNECT,
+ WUIE_ID_KEEP_ALIVE = 0x89,
+ WUIE_ID_ISOCH_DISCARD,
+ WUIE_ID_RESET_DEVICE,
+};
+
+/**
+ * Maximum number of array elements in a WUSB IE.
+ *
+ * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that
+ * are "arrays" have to limited to 4 elements. So we define it
+ * like that to ease up and submit only the neeed size.
+ */
+#define WUIE_ELT_MAX 4
+
+/**
+ * Wrapper for the data that defines a CHID, a CDID or a CK
+ *
+ * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of
+ * data. In order to avoid confusion and enforce types, we wrap it.
+ *
+ * Make it packed, as we use it in some hw definitions.
+ */
+struct wusb_ckhdid {
+ u8 data[16];
+} __attribute__((packed));
+
+static const struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } };
+
+#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1)
+
+/**
+ * WUSB IE: Host Information (WUSB1.0[7.5.2])
+ *
+ * Used to provide information about the host to the Wireless USB
+ * devices in range (CHID can be used as an ASCII string).
+ */
+struct wuie_host_info {
+ struct wuie_hdr hdr;
+ __le16 attributes;
+ struct wusb_ckhdid CHID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Connect Ack (WUSB1.0[7.5.1])
+ *
+ * Used to acknowledge device connect requests. See note for
+ * WUIE_ELT_MAX.
+ */
+struct wuie_connect_ack {
+ struct wuie_hdr hdr;
+ struct {
+ struct wusb_ckhdid CDID;
+ u8 bDeviceAddress; /* 0 means unused */
+ u8 bReserved;
+ } blk[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE Host Information Element, Connect Availability
+ *
+ * WUSB1.0[7.5.2], bmAttributes description
+ */
+enum {
+ WUIE_HI_CAP_RECONNECT = 0,
+ WUIE_HI_CAP_LIMITED,
+ WUIE_HI_CAP_RESERVED,
+ WUIE_HI_CAP_ALL,
+};
+
+/**
+ * WUSB IE: Channel Stop (WUSB1.0[7.5.8])
+ *
+ * Tells devices the host is going to stop sending MMCs and will disappear.
+ */
+struct wuie_channel_stop {
+ struct wuie_hdr hdr;
+ u8 attributes;
+ u8 timestamp[3];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Keepalive (WUSB1.0[7.5.9])
+ *
+ * Ask device(s) to send keepalives.
+ */
+struct wuie_keep_alive {
+ struct wuie_hdr hdr;
+ u8 bDeviceAddress[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Reset device (WUSB1.0[7.5.11])
+ *
+ * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only
+ * use it for one at the time...
+ *
+ * In any case, this request is a wee bit silly: why don't they target
+ * by address??
+ */
+struct wuie_reset {
+ struct wuie_hdr hdr;
+ struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Disconnect device (WUSB1.0[7.5.11])
+ *
+ * Tell device to disconnect; we can fit 4 addresses, but we only use
+ * it for one at the time...
+ */
+struct wuie_disconnect {
+ struct wuie_hdr hdr;
+ u8 bDeviceAddress;
+ u8 padding;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Host disconnect ([WUSB] section 7.5.5)
+ *
+ * Tells all connected devices to disconnect.
+ */
+struct wuie_host_disconnect {
+ struct wuie_hdr hdr;
+} __attribute__((packed));
+
+/**
+ * WUSB Device Notification header (WUSB1.0[7.6])
+ */
+struct wusb_dn_hdr {
+ u8 bType;
+ u8 notifdata[];
+} __attribute__((packed));
+
+/** Device Notification codes (WUSB1.0[Table 7-54]) */
+enum WUSB_DN {
+ WUSB_DN_CONNECT = 0x01,
+ WUSB_DN_DISCONNECT = 0x02,
+ WUSB_DN_EPRDY = 0x03,
+ WUSB_DN_MASAVAILCHANGED = 0x04,
+ WUSB_DN_RWAKE = 0x05,
+ WUSB_DN_SLEEP = 0x06,
+ WUSB_DN_ALIVE = 0x07,
+};
+
+/** WUSB Device Notification Connect */
+struct wusb_dn_connect {
+ struct wusb_dn_hdr hdr;
+ __le16 attributes;
+ struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn)
+{
+ return le16_to_cpu(dn->attributes) & 0xff;
+}
+
+static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn)
+{
+ return (le16_to_cpu(dn->attributes) >> 8) & 0x1;
+}
+
+static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn)
+{
+ return (le16_to_cpu(dn->attributes) >> 9) & 0x03;
+}
+
+/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */
+struct wusb_dn_alive {
+ struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/** Device is disconnecting (WUSB1.0[7.6.2]) */
+struct wusb_dn_disconnect {
+ struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/* General constants */
+enum {
+ WUSB_TRUST_TIMEOUT_MS = 4000, /* [WUSB] section 4.15.1 */
+};
+
+static inline size_t ckhdid_printf(char *pr_ckhdid, size_t size,
+ const struct wusb_ckhdid *ckhdid)
+{
+ return scnprintf(pr_ckhdid, size,
+ "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx "
+ "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx",
+ ckhdid->data[0], ckhdid->data[1],
+ ckhdid->data[2], ckhdid->data[3],
+ ckhdid->data[4], ckhdid->data[5],
+ ckhdid->data[6], ckhdid->data[7],
+ ckhdid->data[8], ckhdid->data[9],
+ ckhdid->data[10], ckhdid->data[11],
+ ckhdid->data[12], ckhdid->data[13],
+ ckhdid->data[14], ckhdid->data[15]);
+}
+
+/*
+ * WUSB Crypto stuff (WUSB1.0[6])
+ */
+
+extern const char *wusb_et_name(u8);
+
+/**
+ * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for
+ * the host or the device.
+ */
+static inline u8 wusb_key_index(int index, int type, int originator)
+{
+ return (originator << 6) | (type << 4) | index;
+}
+
+#define WUSB_KEY_INDEX_TYPE_PTK 0 /* for HWA only */
+#define WUSB_KEY_INDEX_TYPE_ASSOC 1
+#define WUSB_KEY_INDEX_TYPE_GTK 2
+#define WUSB_KEY_INDEX_ORIGINATOR_HOST 0
+#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE 1
+
+/* A CCM Nonce, defined in WUSB1.0[6.4.1] */
+struct aes_ccm_nonce {
+ u8 sfn[6]; /* Little Endian */
+ u8 tkid[3]; /* LE */
+ struct uwb_dev_addr dest_addr;
+ struct uwb_dev_addr src_addr;
+} __attribute__((packed));
+
+/* A CCM operation label, defined on WUSB1.0[6.5.x] */
+struct aes_ccm_label {
+ u8 data[14];
+} __attribute__((packed));
+
+/*
+ * Input to the key derivation sequence defined in
+ * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the
+ * PRF function.
+ */
+struct wusb_keydvt_in {
+ u8 hnonce[16];
+ u8 dnonce[16];
+} __attribute__((packed));
+
+/*
+ * Output from the key derivation sequence defined in
+ * WUSB1.0[6.5.1].
+ */
+struct wusb_keydvt_out {
+ u8 kck[16];
+ u8 ptk[16];
+} __attribute__((packed));
+
+/* Pseudo Random Function WUSB1.0[6.5] */
+extern int wusb_crypto_init(void);
+extern void wusb_crypto_exit(void);
+extern ssize_t wusb_prf(void *out, size_t out_size,
+ const u8 key[16], const struct aes_ccm_nonce *_n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen, size_t len);
+
+static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen)
+{
+ return wusb_prf(out, out_size, key, n, a, b, blen, 64);
+}
+
+static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen)
+{
+ return wusb_prf(out, out_size, key, n, a, b, blen, 128);
+}
+
+static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen)
+{
+ return wusb_prf(out, out_size, key, n, a, b, blen, 256);
+}
+
+/* Key derivation WUSB1.0[6.5.1] */
+static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out,
+ const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct wusb_keydvt_in *keydvt_in)
+{
+ const struct aes_ccm_label a = { .data = "Pair-wise keys" };
+ return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a,
+ keydvt_in, sizeof(*keydvt_in));
+}
+
+/*
+ * Out-of-band MIC Generation WUSB1.0[6.5.2]
+ *
+ * Compute the MIC over @key, @n and @hs and place it in @mic_out.
+ *
+ * @mic_out: Where to place the 8 byte MIC tag
+ * @key: KCK from the derivation process
+ * @n: CCM nonce, n->sfn == 0, TKID as established in the
+ * process.
+ * @hs: Handshake struct for phase 2 of the 4-way.
+ * hs->bStatus and hs->bReserved are zero.
+ * hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2]
+ * hs->dest_addr is the device's USB address padded with 0
+ * hs->src_addr is the hosts's UWB device address
+ * hs->mic is ignored (as we compute that value).
+ */
+static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct usb_handshake *hs)
+{
+ const struct aes_ccm_label a = { .data = "out-of-bandMIC" };
+ return wusb_prf_64(mic_out, 8, key, n, &a,
+ hs, sizeof(*hs) - sizeof(hs->MIC));
+}
+
+#endif /* #ifndef __WUSB_H__ */