diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
new file mode 100644
index 0000000..827896f
--- /dev/null
+++ b/scripts/markup_oops.pl
@@ -0,0 +1,370 @@
+#!/usr/bin/perl
+
+use File::Basename;
+use Math::BigInt;
+use Getopt::Long;
+
+# Copyright 2008, Intel Corporation
+#
+# This file is part of the Linux kernel
+#
+# This program file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License.
+#
+# Authors:
+# 	Arjan van de Ven <arjan@linux.intel.com>
+
+
+my $cross_compile = "";
+my $vmlinux_name = "";
+my $modulefile = "";
+
+# Get options
+Getopt::Long::GetOptions(
+	'cross-compile|c=s'	=> \$cross_compile,
+	'module|m=s'		=> \$modulefile,
+	'help|h'		=> \&usage,
+) || usage ();
+my $vmlinux_name = $ARGV[0];
+if (!defined($vmlinux_name)) {
+	my $kerver = `uname -r`;
+	chomp($kerver);
+	$vmlinux_name = "/lib/modules/$kerver/build/vmlinux";
+	print "No vmlinux specified, assuming $vmlinux_name\n";
+}
+my $filename = $vmlinux_name;
+
+# Parse the oops to find the EIP value
+
+my $target = "0";
+my $function;
+my $module = "";
+my $func_offset = 0;
+my $vmaoffset = 0;
+
+my %regs;
+
+
+sub parse_x86_regs
+{
+	my ($line) = @_;
+	if ($line =~ /EAX: ([0-9a-f]+) EBX: ([0-9a-f]+) ECX: ([0-9a-f]+) EDX: ([0-9a-f]+)/) {
+		$regs{"%eax"} = $1;
+		$regs{"%ebx"} = $2;
+		$regs{"%ecx"} = $3;
+		$regs{"%edx"} = $4;
+	}
+	if ($line =~ /ESI: ([0-9a-f]+) EDI: ([0-9a-f]+) EBP: ([0-9a-f]+) ESP: ([0-9a-f]+)/) {
+		$regs{"%esi"} = $1;
+		$regs{"%edi"} = $2;
+		$regs{"%esp"} = $4;
+	}
+	if ($line =~ /RAX: ([0-9a-f]+) RBX: ([0-9a-f]+) RCX: ([0-9a-f]+)/) {
+		$regs{"%eax"} = $1;
+		$regs{"%ebx"} = $2;
+		$regs{"%ecx"} = $3;
+	}
+	if ($line =~ /RDX: ([0-9a-f]+) RSI: ([0-9a-f]+) RDI: ([0-9a-f]+)/) {
+		$regs{"%edx"} = $1;
+		$regs{"%esi"} = $2;
+		$regs{"%edi"} = $3;
+	}
+	if ($line =~ /RBP: ([0-9a-f]+) R08: ([0-9a-f]+) R09: ([0-9a-f]+)/) {
+		$regs{"%r08"} = $2;
+		$regs{"%r09"} = $3;
+	}
+	if ($line =~ /R10: ([0-9a-f]+) R11: ([0-9a-f]+) R12: ([0-9a-f]+)/) {
+		$regs{"%r10"} = $1;
+		$regs{"%r11"} = $2;
+		$regs{"%r12"} = $3;
+	}
+	if ($line =~ /R13: ([0-9a-f]+) R14: ([0-9a-f]+) R15: ([0-9a-f]+)/) {
+		$regs{"%r13"} = $1;
+		$regs{"%r14"} = $2;
+		$regs{"%r15"} = $3;
+	}
+}
+
+sub reg_name
+{
+	my ($reg) = @_;
+	$reg =~ s/r(.)x/e\1x/;
+	$reg =~ s/r(.)i/e\1i/;
+	$reg =~ s/r(.)p/e\1p/;
+	return $reg;
+}
+
+sub process_x86_regs
+{
+	my ($line, $cntr) = @_;
+	my $str = "";
+	if (length($line) < 40) {
+		return ""; # not an asm istruction
+	}
+
+	# find the arguments to the instruction
+	if ($line =~ /([0-9a-zA-Z\,\%\(\)\-\+]+)$/) {
+		$lastword = $1;
+	} else {
+		return "";
+	}
+
+	# we need to find the registers that get clobbered,
+	# since their value is no longer relevant for previous
+	# instructions in the stream.
+
+	$clobber = $lastword;
+	# first, remove all memory operands, they're read only
+	$clobber =~ s/\([a-z0-9\%\,]+\)//g;
+	# then, remove everything before the comma, thats the read part
+	$clobber =~ s/.*\,//g;
+
+	# if this is the instruction that faulted, we haven't actually done
+	# the write yet... nothing is clobbered.
+	if ($cntr == 0) {
+		$clobber = "";
+	}
+
+	foreach $reg (keys(%regs)) {
+		my $clobberprime = reg_name($clobber);
+		my $lastwordprime = reg_name($lastword);
+		my $val = $regs{$reg};
+		if ($val =~ /^[0]+$/) {
+			$val = "0";
+		} else {
+			$val =~ s/^0*//;
+		}
+
+		# first check if we're clobbering this register; if we do
+		# we print it with a =>, and then delete its value
+		if ($clobber =~ /$reg/ || $clobberprime =~ /$reg/) {
+			if (length($val) > 0) {
+				$str = $str . " $reg => $val ";
+			}
+			$regs{$reg} = "";
+			$val = "";
+		}
+		# now check if we're reading this register
+		if ($lastword =~ /$reg/ || $lastwordprime =~ /$reg/) {
+			if (length($val) > 0) {
+				$str = $str . " $reg = $val ";
+			}
+		}
+	}
+	return $str;
+}
+
+# parse the oops
+while (<STDIN>) {
+	my $line = $_;
+	if ($line =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) {
+		$target = $1;
+	}
+	if ($line =~ /RIP: 0010:\[\<([a-z0-9]+)\>\]/) {
+		$target = $1;
+	}
+	if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
+		$function = $1;
+		$func_offset = $2;
+	}
+	if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
+		$function = $1;
+		$func_offset = $2;
+	}
+
+	# check if it's a module
+	if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
+		$module = $3;
+	}
+	if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
+		$module = $3;
+	}
+	parse_x86_regs($line);
+}
+
+my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
+my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
+if ($target eq "0") {
+	print "No oops found!\n";
+	usage();
+}
+
+# if it's a module, we need to find the .ko file and calculate a load offset
+if ($module ne "") {
+	if ($modulefile eq "") {
+		$modulefile = `modinfo -F filename $module`;
+		chomp($modulefile);
+	}
+	$filename = $modulefile;
+	if ($filename eq "") {
+		print "Module .ko file for $module not found. Aborting\n";
+		exit;
+	}
+	# ok so we found the module, now we need to calculate the vma offset
+	open(FILE, $cross_compile."objdump -dS $filename |") || die "Cannot start objdump";
+	while (<FILE>) {
+		if ($_ =~ /^([0-9a-f]+) \<$function\>\:/) {
+			my $fu = $1;
+			$vmaoffset = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$fu") - Math::BigInt->from_hex("0x$func_offset");
+		}
+	}
+	close(FILE);
+}
+
+my $counter = 0;
+my $state   = 0;
+my $center  = -1;
+my @lines;
+my @reglines;
+
+sub InRange {
+	my ($address, $target) = @_;
+	my $ad = "0x".$address;
+	my $ta = "0x".$target;
+	my $delta = Math::BigInt->from_hex($ad) - Math::BigInt->from_hex($ta);
+
+	if (($delta > -4096) && ($delta < 4096)) {
+		return 1;
+	}
+	return 0;
+}
+
+
+
+# first, parse the input into the lines array, but to keep size down,
+# we only do this for 4Kb around the sweet spot
+
+open(FILE, $cross_compile."objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump";
+
+while (<FILE>) {
+	my $line = $_;
+	chomp($line);
+	if ($state == 0) {
+		if ($line =~ /^([a-f0-9]+)\:/) {
+			if (InRange($1, $target)) {
+				$state = 1;
+			}
+		}
+	}
+	if ($state == 1) {
+		if ($line =~ /^([a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9][a-f0-9]+)\:/) {
+			my $val = $1;
+			if (!InRange($val, $target)) {
+				last;
+			}
+			if ($val eq $target) {
+				$center = $counter;
+			}
+		}
+		$lines[$counter] = $line;
+
+		$counter = $counter + 1;
+	}
+}
+
+close(FILE);
+
+if ($counter == 0) {
+	print "No matching code found \n";
+	exit;
+}
+
+if ($center == -1) {
+	print "No matching code found \n";
+	exit;
+}
+
+my $start;
+my $finish;
+my $codelines = 0;
+my $binarylines = 0;
+# now we go up and down in the array to find how much we want to print
+
+$start = $center;
+
+while ($start > 1) {
+	$start = $start - 1;
+	my $line = $lines[$start];
+	if ($line =~ /^([a-f0-9]+)\:/) {
+		$binarylines = $binarylines + 1;
+	} else {
+		$codelines = $codelines + 1;
+	}
+	if ($codelines > 10) {
+		last;
+	}
+	if ($binarylines > 20) {
+		last;
+	}
+}
+
+
+$finish = $center;
+$codelines = 0;
+$binarylines = 0;
+while ($finish < $counter) {
+	$finish = $finish + 1;
+	my $line = $lines[$finish];
+	if ($line =~ /^([a-f0-9]+)\:/) {
+		$binarylines = $binarylines + 1;
+	} else {
+		$codelines = $codelines + 1;
+	}
+	if ($codelines > 10) {
+		last;
+	}
+	if ($binarylines > 20) {
+		last;
+	}
+}
+
+
+my $i;
+
+
+# start annotating the registers in the asm.
+# this goes from the oopsing point back, so that the annotator
+# can track (opportunistically) which registers got written and
+# whos value no longer is relevant.
+
+$i = $center;
+while ($i >= $start) {
+	$reglines[$i] = process_x86_regs($lines[$i], $center - $i);
+	$i = $i - 1;
+}
+
+$i = $start;
+while ($i < $finish) {
+	my $line;
+	if ($i == $center) {
+		$line =  "*$lines[$i] ";
+	} else {
+		$line =  " $lines[$i] ";
+	}
+	print $line;
+	if (defined($reglines[$i]) && length($reglines[$i]) > 0) {
+		my $c = 60 - length($line);
+		while ($c > 0) { print " "; $c = $c - 1; };
+		print "| $reglines[$i]";
+	}
+	if ($i == $center) {
+		print "<--- faulting instruction";
+	}
+	print "\n";
+	$i = $i +1;
+}
+
+sub usage {
+	print <<EOT;
+Usage:
+  dmesg | perl $0 [OPTION] [VMLINUX]
+
+OPTION:
+  -c, --cross-compile CROSS_COMPILE	Specify the prefix used for toolchain.
+  -m, --module MODULE_DIRNAME		Specify the module filename.
+  -h, --help				Help.
+EOT
+	exit;
+}
+