| /* | 
 |  * The USB Monitor, inspired by Dave Harding's USBMon. | 
 |  * | 
 |  * This is a binary format reader. | 
 |  * | 
 |  * Copyright (C) 2006 Paolo Abeni (paolo.abeni@email.it) | 
 |  * Copyright (C) 2006,2007 Pete Zaitcev (zaitcev@redhat.com) | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/types.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/cdev.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/poll.h> | 
 | #include <linux/compat.h> | 
 | #include <linux/mm.h> | 
 |  | 
 | #include <asm/uaccess.h> | 
 |  | 
 | #include "usb_mon.h" | 
 |  | 
 | /* | 
 |  * Defined by USB 2.0 clause 9.3, table 9.2. | 
 |  */ | 
 | #define SETUP_LEN  8 | 
 |  | 
 | /* ioctl macros */ | 
 | #define MON_IOC_MAGIC 0x92 | 
 |  | 
 | #define MON_IOCQ_URB_LEN _IO(MON_IOC_MAGIC, 1) | 
 | /* #2 used to be MON_IOCX_URB, removed before it got into Linus tree */ | 
 | #define MON_IOCG_STATS _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats) | 
 | #define MON_IOCT_RING_SIZE _IO(MON_IOC_MAGIC, 4) | 
 | #define MON_IOCQ_RING_SIZE _IO(MON_IOC_MAGIC, 5) | 
 | #define MON_IOCX_GET   _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get) | 
 | #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch) | 
 | #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8) | 
 | #ifdef CONFIG_COMPAT | 
 | #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32) | 
 | #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32) | 
 | #endif | 
 |  | 
 | /* | 
 |  * Some architectures have enormous basic pages (16KB for ia64, 64KB for ppc). | 
 |  * But it's all right. Just use a simple way to make sure the chunk is never | 
 |  * smaller than a page. | 
 |  * | 
 |  * N.B. An application does not know our chunk size. | 
 |  * | 
 |  * Woops, get_zeroed_page() returns a single page. I guess we're stuck with | 
 |  * page-sized chunks for the time being. | 
 |  */ | 
 | #define CHUNK_SIZE   PAGE_SIZE | 
 | #define CHUNK_ALIGN(x)   (((x)+CHUNK_SIZE-1) & ~(CHUNK_SIZE-1)) | 
 |  | 
 | /* | 
 |  * The magic limit was calculated so that it allows the monitoring | 
 |  * application to pick data once in two ticks. This way, another application, | 
 |  * which presumably drives the bus, gets to hog CPU, yet we collect our data. | 
 |  * If HZ is 100, a 480 mbit/s bus drives 614 KB every jiffy. USB has an | 
 |  * enormous overhead built into the bus protocol, so we need about 1000 KB. | 
 |  * | 
 |  * This is still too much for most cases, where we just snoop a few | 
 |  * descriptor fetches for enumeration. So, the default is a "reasonable" | 
 |  * amount for systems with HZ=250 and incomplete bus saturation. | 
 |  * | 
 |  * XXX What about multi-megabyte URBs which take minutes to transfer? | 
 |  */ | 
 | #define BUFF_MAX  CHUNK_ALIGN(1200*1024) | 
 | #define BUFF_DFL   CHUNK_ALIGN(300*1024) | 
 | #define BUFF_MIN     CHUNK_ALIGN(8*1024) | 
 |  | 
 | /* | 
 |  * The per-event API header (2 per URB). | 
 |  * | 
 |  * This structure is seen in userland as defined by the documentation. | 
 |  */ | 
 | struct mon_bin_hdr { | 
 | 	u64 id;			/* URB ID - from submission to callback */ | 
 | 	unsigned char type;	/* Same as in text API; extensible. */ | 
 | 	unsigned char xfer_type;	/* ISO, Intr, Control, Bulk */ | 
 | 	unsigned char epnum;	/* Endpoint number and transfer direction */ | 
 | 	unsigned char devnum;	/* Device address */ | 
 | 	unsigned short busnum;	/* Bus number */ | 
 | 	char flag_setup; | 
 | 	char flag_data; | 
 | 	s64 ts_sec;		/* gettimeofday */ | 
 | 	s32 ts_usec;		/* gettimeofday */ | 
 | 	int status; | 
 | 	unsigned int len_urb;	/* Length of data (submitted or actual) */ | 
 | 	unsigned int len_cap;	/* Delivered length */ | 
 | 	unsigned char setup[SETUP_LEN];	/* Only for Control S-type */ | 
 | }; | 
 |  | 
 | /* per file statistic */ | 
 | struct mon_bin_stats { | 
 | 	u32 queued; | 
 | 	u32 dropped; | 
 | }; | 
 |  | 
 | struct mon_bin_get { | 
 | 	struct mon_bin_hdr __user *hdr;	/* Only 48 bytes, not 64. */ | 
 | 	void __user *data; | 
 | 	size_t alloc;		/* Length of data (can be zero) */ | 
 | }; | 
 |  | 
 | struct mon_bin_mfetch { | 
 | 	u32 __user *offvec;	/* Vector of events fetched */ | 
 | 	u32 nfetch;		/* Number of events to fetch (out: fetched) */ | 
 | 	u32 nflush;		/* Number of events to flush */ | 
 | }; | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | struct mon_bin_get32 { | 
 | 	u32 hdr32; | 
 | 	u32 data32; | 
 | 	u32 alloc32; | 
 | }; | 
 |  | 
 | struct mon_bin_mfetch32 { | 
 |         u32 offvec32; | 
 |         u32 nfetch32; | 
 |         u32 nflush32; | 
 | }; | 
 | #endif | 
 |  | 
 | /* Having these two values same prevents wrapping of the mon_bin_hdr */ | 
 | #define PKT_ALIGN   64 | 
 | #define PKT_SIZE    64 | 
 |  | 
 | /* max number of USB bus supported */ | 
 | #define MON_BIN_MAX_MINOR 128 | 
 |  | 
 | /* | 
 |  * The buffer: map of used pages. | 
 |  */ | 
 | struct mon_pgmap { | 
 | 	struct page *pg; | 
 | 	unsigned char *ptr;	/* XXX just use page_to_virt everywhere? */ | 
 | }; | 
 |  | 
 | /* | 
 |  * This gets associated with an open file struct. | 
 |  */ | 
 | struct mon_reader_bin { | 
 | 	/* The buffer: one per open. */ | 
 | 	spinlock_t b_lock;		/* Protect b_cnt, b_in */ | 
 | 	unsigned int b_size;		/* Current size of the buffer - bytes */ | 
 | 	unsigned int b_cnt;		/* Bytes used */ | 
 | 	unsigned int b_in, b_out;	/* Offsets into buffer - bytes */ | 
 | 	unsigned int b_read;		/* Amount of read data in curr. pkt. */ | 
 | 	struct mon_pgmap *b_vec;	/* The map array */ | 
 | 	wait_queue_head_t b_wait;	/* Wait for data here */ | 
 |  | 
 | 	struct mutex fetch_lock;	/* Protect b_read, b_out */ | 
 | 	int mmap_active; | 
 |  | 
 | 	/* A list of these is needed for "bus 0". Some time later. */ | 
 | 	struct mon_reader r; | 
 |  | 
 | 	/* Stats */ | 
 | 	unsigned int cnt_lost; | 
 | }; | 
 |  | 
 | static inline struct mon_bin_hdr *MON_OFF2HDR(const struct mon_reader_bin *rp, | 
 |     unsigned int offset) | 
 | { | 
 | 	return (struct mon_bin_hdr *) | 
 | 	    (rp->b_vec[offset / CHUNK_SIZE].ptr + offset % CHUNK_SIZE); | 
 | } | 
 |  | 
 | #define MON_RING_EMPTY(rp)	((rp)->b_cnt == 0) | 
 |  | 
 | static unsigned char xfer_to_pipe[4] = { | 
 | 	PIPE_CONTROL, PIPE_ISOCHRONOUS, PIPE_BULK, PIPE_INTERRUPT | 
 | }; | 
 |  | 
 | static struct class *mon_bin_class; | 
 | static dev_t mon_bin_dev0; | 
 | static struct cdev mon_bin_cdev; | 
 |  | 
 | static void mon_buff_area_fill(const struct mon_reader_bin *rp, | 
 |     unsigned int offset, unsigned int size); | 
 | static int mon_bin_wait_event(struct file *file, struct mon_reader_bin *rp); | 
 | static int mon_alloc_buff(struct mon_pgmap *map, int npages); | 
 | static void mon_free_buff(struct mon_pgmap *map, int npages); | 
 |  | 
 | /* | 
 |  * This is a "chunked memcpy". It does not manipulate any counters. | 
 |  * But it returns the new offset for repeated application. | 
 |  */ | 
 | unsigned int mon_copy_to_buff(const struct mon_reader_bin *this, | 
 |     unsigned int off, const unsigned char *from, unsigned int length) | 
 | { | 
 | 	unsigned int step_len; | 
 | 	unsigned char *buf; | 
 | 	unsigned int in_page; | 
 |  | 
 | 	while (length) { | 
 | 		/* | 
 | 		 * Determine step_len. | 
 | 		 */ | 
 | 		step_len = length; | 
 | 		in_page = CHUNK_SIZE - (off & (CHUNK_SIZE-1)); | 
 | 		if (in_page < step_len) | 
 | 			step_len = in_page; | 
 |  | 
 | 		/* | 
 | 		 * Copy data and advance pointers. | 
 | 		 */ | 
 | 		buf = this->b_vec[off / CHUNK_SIZE].ptr + off % CHUNK_SIZE; | 
 | 		memcpy(buf, from, step_len); | 
 | 		if ((off += step_len) >= this->b_size) off = 0; | 
 | 		from += step_len; | 
 | 		length -= step_len; | 
 | 	} | 
 | 	return off; | 
 | } | 
 |  | 
 | /* | 
 |  * This is a little worse than the above because it's "chunked copy_to_user". | 
 |  * The return value is an error code, not an offset. | 
 |  */ | 
 | static int copy_from_buf(const struct mon_reader_bin *this, unsigned int off, | 
 |     char __user *to, int length) | 
 | { | 
 | 	unsigned int step_len; | 
 | 	unsigned char *buf; | 
 | 	unsigned int in_page; | 
 |  | 
 | 	while (length) { | 
 | 		/* | 
 | 		 * Determine step_len. | 
 | 		 */ | 
 | 		step_len = length; | 
 | 		in_page = CHUNK_SIZE - (off & (CHUNK_SIZE-1)); | 
 | 		if (in_page < step_len) | 
 | 			step_len = in_page; | 
 |  | 
 | 		/* | 
 | 		 * Copy data and advance pointers. | 
 | 		 */ | 
 | 		buf = this->b_vec[off / CHUNK_SIZE].ptr + off % CHUNK_SIZE; | 
 | 		if (copy_to_user(to, buf, step_len)) | 
 | 			return -EINVAL; | 
 | 		if ((off += step_len) >= this->b_size) off = 0; | 
 | 		to += step_len; | 
 | 		length -= step_len; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Allocate an (aligned) area in the buffer. | 
 |  * This is called under b_lock. | 
 |  * Returns ~0 on failure. | 
 |  */ | 
 | static unsigned int mon_buff_area_alloc(struct mon_reader_bin *rp, | 
 |     unsigned int size) | 
 | { | 
 | 	unsigned int offset; | 
 |  | 
 | 	size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); | 
 | 	if (rp->b_cnt + size > rp->b_size) | 
 | 		return ~0; | 
 | 	offset = rp->b_in; | 
 | 	rp->b_cnt += size; | 
 | 	if ((rp->b_in += size) >= rp->b_size) | 
 | 		rp->b_in -= rp->b_size; | 
 | 	return offset; | 
 | } | 
 |  | 
 | /* | 
 |  * This is the same thing as mon_buff_area_alloc, only it does not allow | 
 |  * buffers to wrap. This is needed by applications which pass references | 
 |  * into mmap-ed buffers up their stacks (libpcap can do that). | 
 |  * | 
 |  * Currently, we always have the header stuck with the data, although | 
 |  * it is not strictly speaking necessary. | 
 |  * | 
 |  * When a buffer would wrap, we place a filler packet to mark the space. | 
 |  */ | 
 | static unsigned int mon_buff_area_alloc_contiguous(struct mon_reader_bin *rp, | 
 |     unsigned int size) | 
 | { | 
 | 	unsigned int offset; | 
 | 	unsigned int fill_size; | 
 |  | 
 | 	size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); | 
 | 	if (rp->b_cnt + size > rp->b_size) | 
 | 		return ~0; | 
 | 	if (rp->b_in + size > rp->b_size) { | 
 | 		/* | 
 | 		 * This would wrap. Find if we still have space after | 
 | 		 * skipping to the end of the buffer. If we do, place | 
 | 		 * a filler packet and allocate a new packet. | 
 | 		 */ | 
 | 		fill_size = rp->b_size - rp->b_in; | 
 | 		if (rp->b_cnt + size + fill_size > rp->b_size) | 
 | 			return ~0; | 
 | 		mon_buff_area_fill(rp, rp->b_in, fill_size); | 
 |  | 
 | 		offset = 0; | 
 | 		rp->b_in = size; | 
 | 		rp->b_cnt += size + fill_size; | 
 | 	} else if (rp->b_in + size == rp->b_size) { | 
 | 		offset = rp->b_in; | 
 | 		rp->b_in = 0; | 
 | 		rp->b_cnt += size; | 
 | 	} else { | 
 | 		offset = rp->b_in; | 
 | 		rp->b_in += size; | 
 | 		rp->b_cnt += size; | 
 | 	} | 
 | 	return offset; | 
 | } | 
 |  | 
 | /* | 
 |  * Return a few (kilo-)bytes to the head of the buffer. | 
 |  * This is used if a DMA fetch fails. | 
 |  */ | 
 | static void mon_buff_area_shrink(struct mon_reader_bin *rp, unsigned int size) | 
 | { | 
 |  | 
 | 	size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); | 
 | 	rp->b_cnt -= size; | 
 | 	if (rp->b_in < size) | 
 | 		rp->b_in += rp->b_size; | 
 | 	rp->b_in -= size; | 
 | } | 
 |  | 
 | /* | 
 |  * This has to be called under both b_lock and fetch_lock, because | 
 |  * it accesses both b_cnt and b_out. | 
 |  */ | 
 | static void mon_buff_area_free(struct mon_reader_bin *rp, unsigned int size) | 
 | { | 
 |  | 
 | 	size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); | 
 | 	rp->b_cnt -= size; | 
 | 	if ((rp->b_out += size) >= rp->b_size) | 
 | 		rp->b_out -= rp->b_size; | 
 | } | 
 |  | 
 | static void mon_buff_area_fill(const struct mon_reader_bin *rp, | 
 |     unsigned int offset, unsigned int size) | 
 | { | 
 | 	struct mon_bin_hdr *ep; | 
 |  | 
 | 	ep = MON_OFF2HDR(rp, offset); | 
 | 	memset(ep, 0, PKT_SIZE); | 
 | 	ep->type = '@'; | 
 | 	ep->len_cap = size - PKT_SIZE; | 
 | } | 
 |  | 
 | static inline char mon_bin_get_setup(unsigned char *setupb, | 
 |     const struct urb *urb, char ev_type) | 
 | { | 
 |  | 
 | 	if (!usb_endpoint_xfer_control(&urb->ep->desc) || ev_type != 'S') | 
 | 		return '-'; | 
 |  | 
 | 	if (urb->setup_packet == NULL) | 
 | 		return 'Z'; | 
 |  | 
 | 	memcpy(setupb, urb->setup_packet, SETUP_LEN); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static char mon_bin_get_data(const struct mon_reader_bin *rp, | 
 |     unsigned int offset, struct urb *urb, unsigned int length) | 
 | { | 
 |  | 
 | 	if (urb->dev->bus->uses_dma && | 
 | 	    (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { | 
 | 		mon_dmapeek_vec(rp, offset, urb->transfer_dma, length); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (urb->transfer_buffer == NULL) | 
 | 		return 'Z'; | 
 |  | 
 | 	mon_copy_to_buff(rp, offset, urb->transfer_buffer, length); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, | 
 |     char ev_type, int status) | 
 | { | 
 | 	const struct usb_endpoint_descriptor *epd = &urb->ep->desc; | 
 | 	unsigned long flags; | 
 | 	struct timeval ts; | 
 | 	unsigned int urb_length; | 
 | 	unsigned int offset; | 
 | 	unsigned int length; | 
 | 	unsigned char dir; | 
 | 	struct mon_bin_hdr *ep; | 
 | 	char data_tag = 0; | 
 |  | 
 | 	do_gettimeofday(&ts); | 
 |  | 
 | 	spin_lock_irqsave(&rp->b_lock, flags); | 
 |  | 
 | 	/* | 
 | 	 * Find the maximum allowable length, then allocate space. | 
 | 	 */ | 
 | 	urb_length = (ev_type == 'S') ? | 
 | 	    urb->transfer_buffer_length : urb->actual_length; | 
 | 	length = urb_length; | 
 |  | 
 | 	if (length >= rp->b_size/5) | 
 | 		length = rp->b_size/5; | 
 |  | 
 | 	if (usb_urb_dir_in(urb)) { | 
 | 		if (ev_type == 'S') { | 
 | 			length = 0; | 
 | 			data_tag = '<'; | 
 | 		} | 
 | 		/* Cannot rely on endpoint number in case of control ep.0 */ | 
 | 		dir = USB_DIR_IN; | 
 | 	} else { | 
 | 		if (ev_type == 'C') { | 
 | 			length = 0; | 
 | 			data_tag = '>'; | 
 | 		} | 
 | 		dir = 0; | 
 | 	} | 
 |  | 
 | 	if (rp->mmap_active) | 
 | 		offset = mon_buff_area_alloc_contiguous(rp, length + PKT_SIZE); | 
 | 	else | 
 | 		offset = mon_buff_area_alloc(rp, length + PKT_SIZE); | 
 | 	if (offset == ~0) { | 
 | 		rp->cnt_lost++; | 
 | 		spin_unlock_irqrestore(&rp->b_lock, flags); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ep = MON_OFF2HDR(rp, offset); | 
 | 	if ((offset += PKT_SIZE) >= rp->b_size) offset = 0; | 
 |  | 
 | 	/* | 
 | 	 * Fill the allocated area. | 
 | 	 */ | 
 | 	memset(ep, 0, PKT_SIZE); | 
 | 	ep->type = ev_type; | 
 | 	ep->xfer_type = xfer_to_pipe[usb_endpoint_type(epd)]; | 
 | 	ep->epnum = dir | usb_endpoint_num(epd); | 
 | 	ep->devnum = urb->dev->devnum; | 
 | 	ep->busnum = urb->dev->bus->busnum; | 
 | 	ep->id = (unsigned long) urb; | 
 | 	ep->ts_sec = ts.tv_sec; | 
 | 	ep->ts_usec = ts.tv_usec; | 
 | 	ep->status = status; | 
 | 	ep->len_urb = urb_length; | 
 | 	ep->len_cap = length; | 
 |  | 
 | 	ep->flag_setup = mon_bin_get_setup(ep->setup, urb, ev_type); | 
 | 	if (length != 0) { | 
 | 		ep->flag_data = mon_bin_get_data(rp, offset, urb, length); | 
 | 		if (ep->flag_data != 0) {	/* Yes, it's 0x00, not '0' */ | 
 | 			ep->len_cap = 0; | 
 | 			mon_buff_area_shrink(rp, length); | 
 | 		} | 
 | 	} else { | 
 | 		ep->flag_data = data_tag; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&rp->b_lock, flags); | 
 |  | 
 | 	wake_up(&rp->b_wait); | 
 | } | 
 |  | 
 | static void mon_bin_submit(void *data, struct urb *urb) | 
 | { | 
 | 	struct mon_reader_bin *rp = data; | 
 | 	mon_bin_event(rp, urb, 'S', -EINPROGRESS); | 
 | } | 
 |  | 
 | static void mon_bin_complete(void *data, struct urb *urb, int status) | 
 | { | 
 | 	struct mon_reader_bin *rp = data; | 
 | 	mon_bin_event(rp, urb, 'C', status); | 
 | } | 
 |  | 
 | static void mon_bin_error(void *data, struct urb *urb, int error) | 
 | { | 
 | 	struct mon_reader_bin *rp = data; | 
 | 	unsigned long flags; | 
 | 	unsigned int offset; | 
 | 	struct mon_bin_hdr *ep; | 
 |  | 
 | 	spin_lock_irqsave(&rp->b_lock, flags); | 
 |  | 
 | 	offset = mon_buff_area_alloc(rp, PKT_SIZE); | 
 | 	if (offset == ~0) { | 
 | 		/* Not incrementing cnt_lost. Just because. */ | 
 | 		spin_unlock_irqrestore(&rp->b_lock, flags); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ep = MON_OFF2HDR(rp, offset); | 
 |  | 
 | 	memset(ep, 0, PKT_SIZE); | 
 | 	ep->type = 'E'; | 
 | 	ep->xfer_type = xfer_to_pipe[usb_endpoint_type(&urb->ep->desc)]; | 
 | 	ep->epnum = usb_urb_dir_in(urb) ? USB_DIR_IN : 0; | 
 | 	ep->epnum |= usb_endpoint_num(&urb->ep->desc); | 
 | 	ep->devnum = urb->dev->devnum; | 
 | 	ep->busnum = urb->dev->bus->busnum; | 
 | 	ep->id = (unsigned long) urb; | 
 | 	ep->status = error; | 
 |  | 
 | 	ep->flag_setup = '-'; | 
 | 	ep->flag_data = 'E'; | 
 |  | 
 | 	spin_unlock_irqrestore(&rp->b_lock, flags); | 
 |  | 
 | 	wake_up(&rp->b_wait); | 
 | } | 
 |  | 
 | static int mon_bin_open(struct inode *inode, struct file *file) | 
 | { | 
 | 	struct mon_bus *mbus; | 
 | 	struct mon_reader_bin *rp; | 
 | 	size_t size; | 
 | 	int rc; | 
 |  | 
 | 	mutex_lock(&mon_lock); | 
 | 	if ((mbus = mon_bus_lookup(iminor(inode))) == NULL) { | 
 | 		mutex_unlock(&mon_lock); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	if (mbus != &mon_bus0 && mbus->u_bus == NULL) { | 
 | 		printk(KERN_ERR TAG ": consistency error on open\n"); | 
 | 		mutex_unlock(&mon_lock); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	rp = kzalloc(sizeof(struct mon_reader_bin), GFP_KERNEL); | 
 | 	if (rp == NULL) { | 
 | 		rc = -ENOMEM; | 
 | 		goto err_alloc; | 
 | 	} | 
 | 	spin_lock_init(&rp->b_lock); | 
 | 	init_waitqueue_head(&rp->b_wait); | 
 | 	mutex_init(&rp->fetch_lock); | 
 |  | 
 | 	rp->b_size = BUFF_DFL; | 
 |  | 
 | 	size = sizeof(struct mon_pgmap) * (rp->b_size/CHUNK_SIZE); | 
 | 	if ((rp->b_vec = kzalloc(size, GFP_KERNEL)) == NULL) { | 
 | 		rc = -ENOMEM; | 
 | 		goto err_allocvec; | 
 | 	} | 
 |  | 
 | 	if ((rc = mon_alloc_buff(rp->b_vec, rp->b_size/CHUNK_SIZE)) < 0) | 
 | 		goto err_allocbuff; | 
 |  | 
 | 	rp->r.m_bus = mbus; | 
 | 	rp->r.r_data = rp; | 
 | 	rp->r.rnf_submit = mon_bin_submit; | 
 | 	rp->r.rnf_error = mon_bin_error; | 
 | 	rp->r.rnf_complete = mon_bin_complete; | 
 |  | 
 | 	mon_reader_add(mbus, &rp->r); | 
 |  | 
 | 	file->private_data = rp; | 
 | 	mutex_unlock(&mon_lock); | 
 | 	return 0; | 
 |  | 
 | err_allocbuff: | 
 | 	kfree(rp->b_vec); | 
 | err_allocvec: | 
 | 	kfree(rp); | 
 | err_alloc: | 
 | 	mutex_unlock(&mon_lock); | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* | 
 |  * Extract an event from buffer and copy it to user space. | 
 |  * Wait if there is no event ready. | 
 |  * Returns zero or error. | 
 |  */ | 
 | static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp, | 
 |     struct mon_bin_hdr __user *hdr, void __user *data, unsigned int nbytes) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct mon_bin_hdr *ep; | 
 | 	size_t step_len; | 
 | 	unsigned int offset; | 
 | 	int rc; | 
 |  | 
 | 	mutex_lock(&rp->fetch_lock); | 
 |  | 
 | 	if ((rc = mon_bin_wait_event(file, rp)) < 0) { | 
 | 		mutex_unlock(&rp->fetch_lock); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	ep = MON_OFF2HDR(rp, rp->b_out); | 
 |  | 
 | 	if (copy_to_user(hdr, ep, sizeof(struct mon_bin_hdr))) { | 
 | 		mutex_unlock(&rp->fetch_lock); | 
 | 		return -EFAULT; | 
 | 	} | 
 |  | 
 | 	step_len = min(ep->len_cap, nbytes); | 
 | 	if ((offset = rp->b_out + PKT_SIZE) >= rp->b_size) offset = 0; | 
 |  | 
 | 	if (copy_from_buf(rp, offset, data, step_len)) { | 
 | 		mutex_unlock(&rp->fetch_lock); | 
 | 		return -EFAULT; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&rp->b_lock, flags); | 
 | 	mon_buff_area_free(rp, PKT_SIZE + ep->len_cap); | 
 | 	spin_unlock_irqrestore(&rp->b_lock, flags); | 
 | 	rp->b_read = 0; | 
 |  | 
 | 	mutex_unlock(&rp->fetch_lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mon_bin_release(struct inode *inode, struct file *file) | 
 | { | 
 | 	struct mon_reader_bin *rp = file->private_data; | 
 | 	struct mon_bus* mbus = rp->r.m_bus; | 
 |  | 
 | 	mutex_lock(&mon_lock); | 
 |  | 
 | 	if (mbus->nreaders <= 0) { | 
 | 		printk(KERN_ERR TAG ": consistency error on close\n"); | 
 | 		mutex_unlock(&mon_lock); | 
 | 		return 0; | 
 | 	} | 
 | 	mon_reader_del(mbus, &rp->r); | 
 |  | 
 | 	mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE); | 
 | 	kfree(rp->b_vec); | 
 | 	kfree(rp); | 
 |  | 
 | 	mutex_unlock(&mon_lock); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t mon_bin_read(struct file *file, char __user *buf, | 
 |     size_t nbytes, loff_t *ppos) | 
 | { | 
 | 	struct mon_reader_bin *rp = file->private_data; | 
 | 	unsigned long flags; | 
 | 	struct mon_bin_hdr *ep; | 
 | 	unsigned int offset; | 
 | 	size_t step_len; | 
 | 	char *ptr; | 
 | 	ssize_t done = 0; | 
 | 	int rc; | 
 |  | 
 | 	mutex_lock(&rp->fetch_lock); | 
 |  | 
 | 	if ((rc = mon_bin_wait_event(file, rp)) < 0) { | 
 | 		mutex_unlock(&rp->fetch_lock); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	ep = MON_OFF2HDR(rp, rp->b_out); | 
 |  | 
 | 	if (rp->b_read < sizeof(struct mon_bin_hdr)) { | 
 | 		step_len = min(nbytes, sizeof(struct mon_bin_hdr) - rp->b_read); | 
 | 		ptr = ((char *)ep) + rp->b_read; | 
 | 		if (step_len && copy_to_user(buf, ptr, step_len)) { | 
 | 			mutex_unlock(&rp->fetch_lock); | 
 | 			return -EFAULT; | 
 | 		} | 
 | 		nbytes -= step_len; | 
 | 		buf += step_len; | 
 | 		rp->b_read += step_len; | 
 | 		done += step_len; | 
 | 	} | 
 |  | 
 | 	if (rp->b_read >= sizeof(struct mon_bin_hdr)) { | 
 | 		step_len = min(nbytes, (size_t)ep->len_cap); | 
 | 		offset = rp->b_out + PKT_SIZE; | 
 | 		offset += rp->b_read - sizeof(struct mon_bin_hdr); | 
 | 		if (offset >= rp->b_size) | 
 | 			offset -= rp->b_size; | 
 | 		if (copy_from_buf(rp, offset, buf, step_len)) { | 
 | 			mutex_unlock(&rp->fetch_lock); | 
 | 			return -EFAULT; | 
 | 		} | 
 | 		nbytes -= step_len; | 
 | 		buf += step_len; | 
 | 		rp->b_read += step_len; | 
 | 		done += step_len; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Check if whole packet was read, and if so, jump to the next one. | 
 | 	 */ | 
 | 	if (rp->b_read >= sizeof(struct mon_bin_hdr) + ep->len_cap) { | 
 | 		spin_lock_irqsave(&rp->b_lock, flags); | 
 | 		mon_buff_area_free(rp, PKT_SIZE + ep->len_cap); | 
 | 		spin_unlock_irqrestore(&rp->b_lock, flags); | 
 | 		rp->b_read = 0; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&rp->fetch_lock); | 
 | 	return done; | 
 | } | 
 |  | 
 | /* | 
 |  * Remove at most nevents from chunked buffer. | 
 |  * Returns the number of removed events. | 
 |  */ | 
 | static int mon_bin_flush(struct mon_reader_bin *rp, unsigned nevents) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct mon_bin_hdr *ep; | 
 | 	int i; | 
 |  | 
 | 	mutex_lock(&rp->fetch_lock); | 
 | 	spin_lock_irqsave(&rp->b_lock, flags); | 
 | 	for (i = 0; i < nevents; ++i) { | 
 | 		if (MON_RING_EMPTY(rp)) | 
 | 			break; | 
 |  | 
 | 		ep = MON_OFF2HDR(rp, rp->b_out); | 
 | 		mon_buff_area_free(rp, PKT_SIZE + ep->len_cap); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&rp->b_lock, flags); | 
 | 	rp->b_read = 0; | 
 | 	mutex_unlock(&rp->fetch_lock); | 
 | 	return i; | 
 | } | 
 |  | 
 | /* | 
 |  * Fetch at most max event offsets into the buffer and put them into vec. | 
 |  * The events are usually freed later with mon_bin_flush. | 
 |  * Return the effective number of events fetched. | 
 |  */ | 
 | static int mon_bin_fetch(struct file *file, struct mon_reader_bin *rp, | 
 |     u32 __user *vec, unsigned int max) | 
 | { | 
 | 	unsigned int cur_out; | 
 | 	unsigned int bytes, avail; | 
 | 	unsigned int size; | 
 | 	unsigned int nevents; | 
 | 	struct mon_bin_hdr *ep; | 
 | 	unsigned long flags; | 
 | 	int rc; | 
 |  | 
 | 	mutex_lock(&rp->fetch_lock); | 
 |  | 
 | 	if ((rc = mon_bin_wait_event(file, rp)) < 0) { | 
 | 		mutex_unlock(&rp->fetch_lock); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&rp->b_lock, flags); | 
 | 	avail = rp->b_cnt; | 
 | 	spin_unlock_irqrestore(&rp->b_lock, flags); | 
 |  | 
 | 	cur_out = rp->b_out; | 
 | 	nevents = 0; | 
 | 	bytes = 0; | 
 | 	while (bytes < avail) { | 
 | 		if (nevents >= max) | 
 | 			break; | 
 |  | 
 | 		ep = MON_OFF2HDR(rp, cur_out); | 
 | 		if (put_user(cur_out, &vec[nevents])) { | 
 | 			mutex_unlock(&rp->fetch_lock); | 
 | 			return -EFAULT; | 
 | 		} | 
 |  | 
 | 		nevents++; | 
 | 		size = ep->len_cap + PKT_SIZE; | 
 | 		size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); | 
 | 		if ((cur_out += size) >= rp->b_size) | 
 | 			cur_out -= rp->b_size; | 
 | 		bytes += size; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&rp->fetch_lock); | 
 | 	return nevents; | 
 | } | 
 |  | 
 | /* | 
 |  * Count events. This is almost the same as the above mon_bin_fetch, | 
 |  * only we do not store offsets into user vector, and we have no limit. | 
 |  */ | 
 | static int mon_bin_queued(struct mon_reader_bin *rp) | 
 | { | 
 | 	unsigned int cur_out; | 
 | 	unsigned int bytes, avail; | 
 | 	unsigned int size; | 
 | 	unsigned int nevents; | 
 | 	struct mon_bin_hdr *ep; | 
 | 	unsigned long flags; | 
 |  | 
 | 	mutex_lock(&rp->fetch_lock); | 
 |  | 
 | 	spin_lock_irqsave(&rp->b_lock, flags); | 
 | 	avail = rp->b_cnt; | 
 | 	spin_unlock_irqrestore(&rp->b_lock, flags); | 
 |  | 
 | 	cur_out = rp->b_out; | 
 | 	nevents = 0; | 
 | 	bytes = 0; | 
 | 	while (bytes < avail) { | 
 | 		ep = MON_OFF2HDR(rp, cur_out); | 
 |  | 
 | 		nevents++; | 
 | 		size = ep->len_cap + PKT_SIZE; | 
 | 		size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); | 
 | 		if ((cur_out += size) >= rp->b_size) | 
 | 			cur_out -= rp->b_size; | 
 | 		bytes += size; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&rp->fetch_lock); | 
 | 	return nevents; | 
 | } | 
 |  | 
 | /* | 
 |  */ | 
 | static int mon_bin_ioctl(struct inode *inode, struct file *file, | 
 |     unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct mon_reader_bin *rp = file->private_data; | 
 | 	// struct mon_bus* mbus = rp->r.m_bus; | 
 | 	int ret = 0; | 
 | 	struct mon_bin_hdr *ep; | 
 | 	unsigned long flags; | 
 |  | 
 | 	switch (cmd) { | 
 |  | 
 | 	case MON_IOCQ_URB_LEN: | 
 | 		/* | 
 | 		 * N.B. This only returns the size of data, without the header. | 
 | 		 */ | 
 | 		spin_lock_irqsave(&rp->b_lock, flags); | 
 | 		if (!MON_RING_EMPTY(rp)) { | 
 | 			ep = MON_OFF2HDR(rp, rp->b_out); | 
 | 			ret = ep->len_cap; | 
 | 		} | 
 | 		spin_unlock_irqrestore(&rp->b_lock, flags); | 
 | 		break; | 
 |  | 
 | 	case MON_IOCQ_RING_SIZE: | 
 | 		ret = rp->b_size; | 
 | 		break; | 
 |  | 
 | 	case MON_IOCT_RING_SIZE: | 
 | 		/* | 
 | 		 * Changing the buffer size will flush it's contents; the new | 
 | 		 * buffer is allocated before releasing the old one to be sure | 
 | 		 * the device will stay functional also in case of memory | 
 | 		 * pressure. | 
 | 		 */ | 
 | 		{ | 
 | 		int size; | 
 | 		struct mon_pgmap *vec; | 
 |  | 
 | 		if (arg < BUFF_MIN || arg > BUFF_MAX) | 
 | 			return -EINVAL; | 
 |  | 
 | 		size = CHUNK_ALIGN(arg); | 
 | 		if ((vec = kzalloc(sizeof(struct mon_pgmap) * (size/CHUNK_SIZE), | 
 | 		    GFP_KERNEL)) == NULL) { | 
 | 			ret = -ENOMEM; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		ret = mon_alloc_buff(vec, size/CHUNK_SIZE); | 
 | 		if (ret < 0) { | 
 | 			kfree(vec); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		mutex_lock(&rp->fetch_lock); | 
 | 		spin_lock_irqsave(&rp->b_lock, flags); | 
 | 		mon_free_buff(rp->b_vec, size/CHUNK_SIZE); | 
 | 		kfree(rp->b_vec); | 
 | 		rp->b_vec  = vec; | 
 | 		rp->b_size = size; | 
 | 		rp->b_read = rp->b_in = rp->b_out = rp->b_cnt = 0; | 
 | 		rp->cnt_lost = 0; | 
 | 		spin_unlock_irqrestore(&rp->b_lock, flags); | 
 | 		mutex_unlock(&rp->fetch_lock); | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case MON_IOCH_MFLUSH: | 
 | 		ret = mon_bin_flush(rp, arg); | 
 | 		break; | 
 |  | 
 | 	case MON_IOCX_GET: | 
 | 		{ | 
 | 		struct mon_bin_get getb; | 
 |  | 
 | 		if (copy_from_user(&getb, (void __user *)arg, | 
 | 					    sizeof(struct mon_bin_get))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		if (getb.alloc > 0x10000000)	/* Want to cast to u32 */ | 
 | 			return -EINVAL; | 
 | 		ret = mon_bin_get_event(file, rp, | 
 | 			  getb.hdr, getb.data, (unsigned int)getb.alloc); | 
 | 		} | 
 | 		break; | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | 	case MON_IOCX_GET32: { | 
 | 		struct mon_bin_get32 getb; | 
 |  | 
 | 		if (copy_from_user(&getb, (void __user *)arg, | 
 | 					    sizeof(struct mon_bin_get32))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		ret = mon_bin_get_event(file, rp, | 
 | 		    compat_ptr(getb.hdr32), compat_ptr(getb.data32), | 
 | 		    getb.alloc32); | 
 | 		} | 
 | 		break; | 
 | #endif | 
 |  | 
 | 	case MON_IOCX_MFETCH: | 
 | 		{ | 
 | 		struct mon_bin_mfetch mfetch; | 
 | 		struct mon_bin_mfetch __user *uptr; | 
 |  | 
 | 		uptr = (struct mon_bin_mfetch __user *)arg; | 
 |  | 
 | 		if (copy_from_user(&mfetch, uptr, sizeof(mfetch))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		if (mfetch.nflush) { | 
 | 			ret = mon_bin_flush(rp, mfetch.nflush); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 | 			if (put_user(ret, &uptr->nflush)) | 
 | 				return -EFAULT; | 
 | 		} | 
 | 		ret = mon_bin_fetch(file, rp, mfetch.offvec, mfetch.nfetch); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		if (put_user(ret, &uptr->nfetch)) | 
 | 			return -EFAULT; | 
 | 		ret = 0; | 
 | 		} | 
 | 		break; | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | 	case MON_IOCX_MFETCH32: | 
 | 		{ | 
 | 		struct mon_bin_mfetch32 mfetch; | 
 | 		struct mon_bin_mfetch32 __user *uptr; | 
 |  | 
 | 		uptr = (struct mon_bin_mfetch32 __user *) compat_ptr(arg); | 
 |  | 
 | 		if (copy_from_user(&mfetch, uptr, sizeof(mfetch))) | 
 | 			return -EFAULT; | 
 |  | 
 | 		if (mfetch.nflush32) { | 
 | 			ret = mon_bin_flush(rp, mfetch.nflush32); | 
 | 			if (ret < 0) | 
 | 				return ret; | 
 | 			if (put_user(ret, &uptr->nflush32)) | 
 | 				return -EFAULT; | 
 | 		} | 
 | 		ret = mon_bin_fetch(file, rp, compat_ptr(mfetch.offvec32), | 
 | 		    mfetch.nfetch32); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 		if (put_user(ret, &uptr->nfetch32)) | 
 | 			return -EFAULT; | 
 | 		ret = 0; | 
 | 		} | 
 | 		break; | 
 | #endif | 
 |  | 
 | 	case MON_IOCG_STATS: { | 
 | 		struct mon_bin_stats __user *sp; | 
 | 		unsigned int nevents; | 
 | 		unsigned int ndropped; | 
 |  | 
 | 		spin_lock_irqsave(&rp->b_lock, flags); | 
 | 		ndropped = rp->cnt_lost; | 
 | 		rp->cnt_lost = 0; | 
 | 		spin_unlock_irqrestore(&rp->b_lock, flags); | 
 | 		nevents = mon_bin_queued(rp); | 
 |  | 
 | 		sp = (struct mon_bin_stats __user *)arg; | 
 | 		if (put_user(rp->cnt_lost, &sp->dropped)) | 
 | 			return -EFAULT; | 
 | 		if (put_user(nevents, &sp->queued)) | 
 | 			return -EFAULT; | 
 |  | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		return -ENOTTY; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static unsigned int | 
 | mon_bin_poll(struct file *file, struct poll_table_struct *wait) | 
 | { | 
 | 	struct mon_reader_bin *rp = file->private_data; | 
 | 	unsigned int mask = 0; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (file->f_mode & FMODE_READ) | 
 | 		poll_wait(file, &rp->b_wait, wait); | 
 |  | 
 | 	spin_lock_irqsave(&rp->b_lock, flags); | 
 | 	if (!MON_RING_EMPTY(rp)) | 
 | 		mask |= POLLIN | POLLRDNORM;    /* readable */ | 
 | 	spin_unlock_irqrestore(&rp->b_lock, flags); | 
 | 	return mask; | 
 | } | 
 |  | 
 | /* | 
 |  * open and close: just keep track of how many times the device is | 
 |  * mapped, to use the proper memory allocation function. | 
 |  */ | 
 | static void mon_bin_vma_open(struct vm_area_struct *vma) | 
 | { | 
 | 	struct mon_reader_bin *rp = vma->vm_private_data; | 
 | 	rp->mmap_active++; | 
 | } | 
 |  | 
 | static void mon_bin_vma_close(struct vm_area_struct *vma) | 
 | { | 
 | 	struct mon_reader_bin *rp = vma->vm_private_data; | 
 | 	rp->mmap_active--; | 
 | } | 
 |  | 
 | /* | 
 |  * Map ring pages to user space. | 
 |  */ | 
 | struct page *mon_bin_vma_nopage(struct vm_area_struct *vma, | 
 |                                 unsigned long address, int *type) | 
 | { | 
 | 	struct mon_reader_bin *rp = vma->vm_private_data; | 
 | 	unsigned long offset, chunk_idx; | 
 | 	struct page *pageptr; | 
 |  | 
 | 	offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT); | 
 | 	if (offset >= rp->b_size) | 
 | 		return NOPAGE_SIGBUS; | 
 | 	chunk_idx = offset / CHUNK_SIZE; | 
 | 	pageptr = rp->b_vec[chunk_idx].pg; | 
 | 	get_page(pageptr); | 
 | 	if (type) | 
 | 		*type = VM_FAULT_MINOR; | 
 | 	return pageptr; | 
 | } | 
 |  | 
 | struct vm_operations_struct mon_bin_vm_ops = { | 
 | 	.open =     mon_bin_vma_open, | 
 | 	.close =    mon_bin_vma_close, | 
 | 	.nopage =   mon_bin_vma_nopage, | 
 | }; | 
 |  | 
 | int mon_bin_mmap(struct file *filp, struct vm_area_struct *vma) | 
 | { | 
 | 	/* don't do anything here: "nopage" will set up page table entries */ | 
 | 	vma->vm_ops = &mon_bin_vm_ops; | 
 | 	vma->vm_flags |= VM_RESERVED; | 
 | 	vma->vm_private_data = filp->private_data; | 
 | 	mon_bin_vma_open(vma); | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct file_operations mon_fops_binary = { | 
 | 	.owner =	THIS_MODULE, | 
 | 	.open =		mon_bin_open, | 
 | 	.llseek =	no_llseek, | 
 | 	.read =		mon_bin_read, | 
 | 	/* .write =	mon_text_write, */ | 
 | 	.poll =		mon_bin_poll, | 
 | 	.ioctl =	mon_bin_ioctl, | 
 | 	.release =	mon_bin_release, | 
 | }; | 
 |  | 
 | static int mon_bin_wait_event(struct file *file, struct mon_reader_bin *rp) | 
 | { | 
 | 	DECLARE_WAITQUEUE(waita, current); | 
 | 	unsigned long flags; | 
 |  | 
 | 	add_wait_queue(&rp->b_wait, &waita); | 
 | 	set_current_state(TASK_INTERRUPTIBLE); | 
 |  | 
 | 	spin_lock_irqsave(&rp->b_lock, flags); | 
 | 	while (MON_RING_EMPTY(rp)) { | 
 | 		spin_unlock_irqrestore(&rp->b_lock, flags); | 
 |  | 
 | 		if (file->f_flags & O_NONBLOCK) { | 
 | 			set_current_state(TASK_RUNNING); | 
 | 			remove_wait_queue(&rp->b_wait, &waita); | 
 | 			return -EWOULDBLOCK; /* Same as EAGAIN in Linux */ | 
 | 		} | 
 | 		schedule(); | 
 | 		if (signal_pending(current)) { | 
 | 			remove_wait_queue(&rp->b_wait, &waita); | 
 | 			return -EINTR; | 
 | 		} | 
 | 		set_current_state(TASK_INTERRUPTIBLE); | 
 |  | 
 | 		spin_lock_irqsave(&rp->b_lock, flags); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&rp->b_lock, flags); | 
 |  | 
 | 	set_current_state(TASK_RUNNING); | 
 | 	remove_wait_queue(&rp->b_wait, &waita); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mon_alloc_buff(struct mon_pgmap *map, int npages) | 
 | { | 
 | 	int n; | 
 | 	unsigned long vaddr; | 
 |  | 
 | 	for (n = 0; n < npages; n++) { | 
 | 		vaddr = get_zeroed_page(GFP_KERNEL); | 
 | 		if (vaddr == 0) { | 
 | 			while (n-- != 0) | 
 | 				free_page((unsigned long) map[n].ptr); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 		map[n].ptr = (unsigned char *) vaddr; | 
 | 		map[n].pg = virt_to_page(vaddr); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mon_free_buff(struct mon_pgmap *map, int npages) | 
 | { | 
 | 	int n; | 
 |  | 
 | 	for (n = 0; n < npages; n++) | 
 | 		free_page((unsigned long) map[n].ptr); | 
 | } | 
 |  | 
 | int mon_bin_add(struct mon_bus *mbus, const struct usb_bus *ubus) | 
 | { | 
 | 	struct device *dev; | 
 | 	unsigned minor = ubus? ubus->busnum: 0; | 
 |  | 
 | 	if (minor >= MON_BIN_MAX_MINOR) | 
 | 		return 0; | 
 |  | 
 | 	dev = device_create(mon_bin_class, ubus? ubus->controller: NULL, | 
 | 			MKDEV(MAJOR(mon_bin_dev0), minor), "usbmon%d", minor); | 
 | 	if (IS_ERR(dev)) | 
 | 		return 0; | 
 |  | 
 | 	mbus->classdev = dev; | 
 | 	return 1; | 
 | } | 
 |  | 
 | void mon_bin_del(struct mon_bus *mbus) | 
 | { | 
 | 	device_destroy(mon_bin_class, mbus->classdev->devt); | 
 | } | 
 |  | 
 | int __init mon_bin_init(void) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	mon_bin_class = class_create(THIS_MODULE, "usbmon"); | 
 | 	if (IS_ERR(mon_bin_class)) { | 
 | 		rc = PTR_ERR(mon_bin_class); | 
 | 		goto err_class; | 
 | 	} | 
 |  | 
 | 	rc = alloc_chrdev_region(&mon_bin_dev0, 0, MON_BIN_MAX_MINOR, "usbmon"); | 
 | 	if (rc < 0) | 
 | 		goto err_dev; | 
 |  | 
 | 	cdev_init(&mon_bin_cdev, &mon_fops_binary); | 
 | 	mon_bin_cdev.owner = THIS_MODULE; | 
 |  | 
 | 	rc = cdev_add(&mon_bin_cdev, mon_bin_dev0, MON_BIN_MAX_MINOR); | 
 | 	if (rc < 0) | 
 | 		goto err_add; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_add: | 
 | 	unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR); | 
 | err_dev: | 
 | 	class_destroy(mon_bin_class); | 
 | err_class: | 
 | 	return rc; | 
 | } | 
 |  | 
 | void mon_bin_exit(void) | 
 | { | 
 | 	cdev_del(&mon_bin_cdev); | 
 | 	unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR); | 
 | 	class_destroy(mon_bin_class); | 
 | } |