msm: 9625: Initialize SPI and SPI Ethernet
9625 supports SPI ethernet on BLSP1 QUP6. Add the dts data,
gpiomux configurations and the board setup code for it.
Change-Id: Ib185a9a0a6bf830fcb53b05a2c60e34a740e8e52
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-9625-gpiomux.c b/arch/arm/mach-msm/board-9625-gpiomux.c
index e28c734..2919f06 100644
--- a/arch/arm/mach-msm/board-9625-gpiomux.c
+++ b/arch/arm/mach-msm/board-9625-gpiomux.c
@@ -24,6 +24,18 @@
.dir = GPIOMUX_OUT_HIGH,
};
+static struct gpiomux_setting gpio_spi_cs_config = {
+ .func = GPIOMUX_FUNC_9,
+ .drv = GPIOMUX_DRV_12MA,
+ .pull = GPIOMUX_PULL_NONE,
+};
+
+static struct gpiomux_setting gpio_spi_config = {
+ .func = GPIOMUX_FUNC_2,
+ .drv = GPIOMUX_DRV_12MA,
+ .pull = GPIOMUX_PULL_NONE,
+};
+
static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
{
.gpio = 45, /* BLSP1 UART TX */
@@ -37,6 +49,31 @@
[GPIOMUX_SUSPENDED] = &gpio_uart_config,
},
},
+ {
+ .gpio = 69, /* BLSP6 QUP SPI_CS_N */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_spi_cs_config,
+ },
+ },
+ {
+ .gpio = 20, /* BLSP6 QUP SPI_DATA_MOSI */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_spi_config,
+ },
+ },
+ {
+ .gpio = 21, /* BLSP6 QUP SPI_DATA_MISO */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_spi_config,
+ },
+ },
+ {
+ .gpio = 23, /* BLSP6 QUP SPI_CLK */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_spi_config,
+ },
+ },
+
};
void __init msm9625_init_gpiomux(void)
diff --git a/arch/arm/mach-msm/board-9625.c b/arch/arm/mach-msm/board-9625.c
index ef0bbbf..e7ef1a9 100644
--- a/arch/arm/mach-msm/board-9625.c
+++ b/arch/arm/mach-msm/board-9625.c
@@ -46,8 +46,8 @@
CLK_DUMMY("dfab_clk", DFAB_CLK, NULL, 0),
CLK_DUMMY("dma_bam_pclk", DMA_BAM_P_CLK, NULL, 0),
CLK_DUMMY("mem_clk", NULL, NULL, 0),
- CLK_DUMMY("core_clk", NULL, "spi_qsd.1", OFF),
- CLK_DUMMY("iface_clk", NULL, "spi_qsd.1", OFF),
+ CLK_DUMMY("core_clk", SPI_CLK, "spi_qsd.1", OFF),
+ CLK_DUMMY("iface_clk", SPI_P_CLK, "spi_qsd.1", OFF),
CLK_DUMMY("core_clk", NULL, "f9966000.i2c", 0),
CLK_DUMMY("iface_clk", NULL, "f9966000.i2c", 0),
CLK_DUMMY("core_clk", NULL, "fe12f000.slim", OFF),
@@ -72,6 +72,8 @@
static struct of_dev_auxdata msm9625_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("qcom,msm-lsuart-v14", 0xF991F000, \
"msm_serial_hsl.0", NULL),
+ OF_DEV_AUXDATA("qcom,spi-qup-v2", 0xF9928000, \
+ "spi_qsd.1", NULL),
{}
};