|  | /* | 
|  | * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips. | 
|  | * | 
|  | *  Copyright (C) 2005 James Chapman (ds1337 core) | 
|  | *  Copyright (C) 2006 David Brownell | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/rtc.h> | 
|  | #include <linux/bcd.h> | 
|  |  | 
|  |  | 
|  |  | 
|  | /* We can't determine type by probing, but if we expect pre-Linux code | 
|  | * to have set the chip up as a clock (turning on the oscillator and | 
|  | * setting the date and time), Linux can ignore the non-clock features. | 
|  | * That's a natural job for a factory or repair bench. | 
|  | * | 
|  | * This is currently a simple no-alarms driver.  If your board has the | 
|  | * alarm irq wired up on a ds1337 or ds1339, and you want to use that, | 
|  | * then look at the rtc-rs5c372 driver for code to steal... | 
|  | */ | 
|  | enum ds_type { | 
|  | ds_1307, | 
|  | ds_1337, | 
|  | ds_1338, | 
|  | ds_1339, | 
|  | ds_1340, | 
|  | m41t00, | 
|  | // rs5c372 too?  different address... | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* RTC registers don't differ much, except for the century flag */ | 
|  | #define DS1307_REG_SECS		0x00	/* 00-59 */ | 
|  | #	define DS1307_BIT_CH		0x80 | 
|  | #	define DS1340_BIT_nEOSC		0x80 | 
|  | #define DS1307_REG_MIN		0x01	/* 00-59 */ | 
|  | #define DS1307_REG_HOUR		0x02	/* 00-23, or 1-12{am,pm} */ | 
|  | #	define DS1307_BIT_12HR		0x40	/* in REG_HOUR */ | 
|  | #	define DS1307_BIT_PM		0x20	/* in REG_HOUR */ | 
|  | #	define DS1340_BIT_CENTURY_EN	0x80	/* in REG_HOUR */ | 
|  | #	define DS1340_BIT_CENTURY	0x40	/* in REG_HOUR */ | 
|  | #define DS1307_REG_WDAY		0x03	/* 01-07 */ | 
|  | #define DS1307_REG_MDAY		0x04	/* 01-31 */ | 
|  | #define DS1307_REG_MONTH	0x05	/* 01-12 */ | 
|  | #	define DS1337_BIT_CENTURY	0x80	/* in REG_MONTH */ | 
|  | #define DS1307_REG_YEAR		0x06	/* 00-99 */ | 
|  |  | 
|  | /* Other registers (control, status, alarms, trickle charge, NVRAM, etc) | 
|  | * start at 7, and they differ a LOT. Only control and status matter for | 
|  | * basic RTC date and time functionality; be careful using them. | 
|  | */ | 
|  | #define DS1307_REG_CONTROL	0x07		/* or ds1338 */ | 
|  | #	define DS1307_BIT_OUT		0x80 | 
|  | #	define DS1338_BIT_OSF		0x20 | 
|  | #	define DS1307_BIT_SQWE		0x10 | 
|  | #	define DS1307_BIT_RS1		0x02 | 
|  | #	define DS1307_BIT_RS0		0x01 | 
|  | #define DS1337_REG_CONTROL	0x0e | 
|  | #	define DS1337_BIT_nEOSC		0x80 | 
|  | #	define DS1337_BIT_RS2		0x10 | 
|  | #	define DS1337_BIT_RS1		0x08 | 
|  | #	define DS1337_BIT_INTCN		0x04 | 
|  | #	define DS1337_BIT_A2IE		0x02 | 
|  | #	define DS1337_BIT_A1IE		0x01 | 
|  | #define DS1340_REG_CONTROL	0x07 | 
|  | #	define DS1340_BIT_OUT		0x80 | 
|  | #	define DS1340_BIT_FT		0x40 | 
|  | #	define DS1340_BIT_CALIB_SIGN	0x20 | 
|  | #	define DS1340_M_CALIBRATION	0x1f | 
|  | #define DS1340_REG_FLAG		0x09 | 
|  | #	define DS1340_BIT_OSF		0x80 | 
|  | #define DS1337_REG_STATUS	0x0f | 
|  | #	define DS1337_BIT_OSF		0x80 | 
|  | #	define DS1337_BIT_A2I		0x02 | 
|  | #	define DS1337_BIT_A1I		0x01 | 
|  | #define DS1339_REG_TRICKLE	0x10 | 
|  |  | 
|  |  | 
|  |  | 
|  | struct ds1307 { | 
|  | u8			reg_addr; | 
|  | bool			has_nvram; | 
|  | u8			regs[8]; | 
|  | enum ds_type		type; | 
|  | struct i2c_msg		msg[2]; | 
|  | struct i2c_client	*client; | 
|  | struct i2c_client	dev; | 
|  | struct rtc_device	*rtc; | 
|  | }; | 
|  |  | 
|  | struct chip_desc { | 
|  | char			name[9]; | 
|  | unsigned		nvram56:1; | 
|  | unsigned		alarm:1; | 
|  | enum ds_type		type; | 
|  | }; | 
|  |  | 
|  | static const struct chip_desc chips[] = { { | 
|  | .name		= "ds1307", | 
|  | .type		= ds_1307, | 
|  | .nvram56	= 1, | 
|  | }, { | 
|  | .name		= "ds1337", | 
|  | .type		= ds_1337, | 
|  | .alarm		= 1, | 
|  | }, { | 
|  | .name		= "ds1338", | 
|  | .type		= ds_1338, | 
|  | .nvram56	= 1, | 
|  | }, { | 
|  | .name		= "ds1339", | 
|  | .type		= ds_1339, | 
|  | .alarm		= 1, | 
|  | }, { | 
|  | .name		= "ds1340", | 
|  | .type		= ds_1340, | 
|  | }, { | 
|  | .name		= "m41t00", | 
|  | .type		= m41t00, | 
|  | }, }; | 
|  |  | 
|  | static inline const struct chip_desc *find_chip(const char *s) | 
|  | { | 
|  | unsigned i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(chips); i++) | 
|  | if (strnicmp(s, chips[i].name, sizeof chips[i].name) == 0) | 
|  | return &chips[i]; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int ds1307_get_time(struct device *dev, struct rtc_time *t) | 
|  | { | 
|  | struct ds1307	*ds1307 = dev_get_drvdata(dev); | 
|  | int		tmp; | 
|  |  | 
|  | /* read the RTC date and time registers all at once */ | 
|  | ds1307->msg[1].flags = I2C_M_RD; | 
|  | ds1307->msg[1].len = 7; | 
|  |  | 
|  | tmp = i2c_transfer(to_i2c_adapter(ds1307->client->dev.parent), | 
|  | ds1307->msg, 2); | 
|  | if (tmp != 2) { | 
|  | dev_err(dev, "%s error %d\n", "read", tmp); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | 
|  | "read", | 
|  | ds1307->regs[0], ds1307->regs[1], | 
|  | ds1307->regs[2], ds1307->regs[3], | 
|  | ds1307->regs[4], ds1307->regs[5], | 
|  | ds1307->regs[6]); | 
|  |  | 
|  | t->tm_sec = BCD2BIN(ds1307->regs[DS1307_REG_SECS] & 0x7f); | 
|  | t->tm_min = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | 
|  | tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f; | 
|  | t->tm_hour = BCD2BIN(tmp); | 
|  | t->tm_wday = BCD2BIN(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1; | 
|  | t->tm_mday = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | 
|  | tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f; | 
|  | t->tm_mon = BCD2BIN(tmp) - 1; | 
|  |  | 
|  | /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */ | 
|  | t->tm_year = BCD2BIN(ds1307->regs[DS1307_REG_YEAR]) + 100; | 
|  |  | 
|  | dev_dbg(dev, "%s secs=%d, mins=%d, " | 
|  | "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | 
|  | "read", t->tm_sec, t->tm_min, | 
|  | t->tm_hour, t->tm_mday, | 
|  | t->tm_mon, t->tm_year, t->tm_wday); | 
|  |  | 
|  | /* initial clock setting can be undefined */ | 
|  | return rtc_valid_tm(t); | 
|  | } | 
|  |  | 
|  | static int ds1307_set_time(struct device *dev, struct rtc_time *t) | 
|  | { | 
|  | struct ds1307	*ds1307 = dev_get_drvdata(dev); | 
|  | int		result; | 
|  | int		tmp; | 
|  | u8		*buf = ds1307->regs; | 
|  |  | 
|  | dev_dbg(dev, "%s secs=%d, mins=%d, " | 
|  | "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | 
|  | "write", t->tm_sec, t->tm_min, | 
|  | t->tm_hour, t->tm_mday, | 
|  | t->tm_mon, t->tm_year, t->tm_wday); | 
|  |  | 
|  | *buf++ = 0;		/* first register addr */ | 
|  | buf[DS1307_REG_SECS] = BIN2BCD(t->tm_sec); | 
|  | buf[DS1307_REG_MIN] = BIN2BCD(t->tm_min); | 
|  | buf[DS1307_REG_HOUR] = BIN2BCD(t->tm_hour); | 
|  | buf[DS1307_REG_WDAY] = BIN2BCD(t->tm_wday + 1); | 
|  | buf[DS1307_REG_MDAY] = BIN2BCD(t->tm_mday); | 
|  | buf[DS1307_REG_MONTH] = BIN2BCD(t->tm_mon + 1); | 
|  |  | 
|  | /* assume 20YY not 19YY */ | 
|  | tmp = t->tm_year - 100; | 
|  | buf[DS1307_REG_YEAR] = BIN2BCD(tmp); | 
|  |  | 
|  | switch (ds1307->type) { | 
|  | case ds_1337: | 
|  | case ds_1339: | 
|  | buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY; | 
|  | break; | 
|  | case ds_1340: | 
|  | buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN | 
|  | | DS1340_BIT_CENTURY; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | ds1307->msg[1].flags = 0; | 
|  | ds1307->msg[1].len = 8; | 
|  |  | 
|  | dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | 
|  | "write", buf[0], buf[1], buf[2], buf[3], | 
|  | buf[4], buf[5], buf[6]); | 
|  |  | 
|  | result = i2c_transfer(to_i2c_adapter(ds1307->client->dev.parent), | 
|  | &ds1307->msg[1], 1); | 
|  | if (result != 1) { | 
|  | dev_err(dev, "%s error %d\n", "write", tmp); | 
|  | return -EIO; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct rtc_class_ops ds13xx_rtc_ops = { | 
|  | .read_time	= ds1307_get_time, | 
|  | .set_time	= ds1307_set_time, | 
|  | }; | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | #define NVRAM_SIZE	56 | 
|  |  | 
|  | static ssize_t | 
|  | ds1307_nvram_read(struct kobject *kobj, struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct i2c_client	*client; | 
|  | struct ds1307		*ds1307; | 
|  | struct i2c_msg		msg[2]; | 
|  | int			result; | 
|  |  | 
|  | client = to_i2c_client(container_of(kobj, struct device, kobj)); | 
|  | ds1307 = i2c_get_clientdata(client); | 
|  |  | 
|  | if (unlikely(off >= NVRAM_SIZE)) | 
|  | return 0; | 
|  | if ((off + count) > NVRAM_SIZE) | 
|  | count = NVRAM_SIZE - off; | 
|  | if (unlikely(!count)) | 
|  | return count; | 
|  |  | 
|  | msg[0].addr = client->addr; | 
|  | msg[0].flags = 0; | 
|  | msg[0].len = 1; | 
|  | msg[0].buf = buf; | 
|  |  | 
|  | buf[0] = 8 + off; | 
|  |  | 
|  | msg[1].addr = client->addr; | 
|  | msg[1].flags = I2C_M_RD; | 
|  | msg[1].len = count; | 
|  | msg[1].buf = buf; | 
|  |  | 
|  | result = i2c_transfer(to_i2c_adapter(client->dev.parent), msg, 2); | 
|  | if (result != 2) { | 
|  | dev_err(&client->dev, "%s error %d\n", "nvram read", result); | 
|  | return -EIO; | 
|  | } | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | ds1307_nvram_write(struct kobject *kobj, struct bin_attribute *attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct i2c_client	*client; | 
|  | u8			buffer[NVRAM_SIZE + 1]; | 
|  | int			ret; | 
|  |  | 
|  | client = to_i2c_client(container_of(kobj, struct device, kobj)); | 
|  |  | 
|  | if (unlikely(off >= NVRAM_SIZE)) | 
|  | return -EFBIG; | 
|  | if ((off + count) > NVRAM_SIZE) | 
|  | count = NVRAM_SIZE - off; | 
|  | if (unlikely(!count)) | 
|  | return count; | 
|  |  | 
|  | buffer[0] = 8 + off; | 
|  | memcpy(buffer + 1, buf, count); | 
|  |  | 
|  | ret = i2c_master_send(client, buffer, count + 1); | 
|  | return (ret < 0) ? ret : (ret - 1); | 
|  | } | 
|  |  | 
|  | static struct bin_attribute nvram = { | 
|  | .attr = { | 
|  | .name	= "nvram", | 
|  | .mode	= S_IRUGO | S_IWUSR, | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  |  | 
|  | .read	= ds1307_nvram_read, | 
|  | .write	= ds1307_nvram_write, | 
|  | .size	= NVRAM_SIZE, | 
|  | }; | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | static struct i2c_driver ds1307_driver; | 
|  |  | 
|  | static int __devinit ds1307_probe(struct i2c_client *client) | 
|  | { | 
|  | struct ds1307		*ds1307; | 
|  | int			err = -ENODEV; | 
|  | int			tmp; | 
|  | const struct chip_desc	*chip; | 
|  | struct i2c_adapter	*adapter = to_i2c_adapter(client->dev.parent); | 
|  |  | 
|  | chip = find_chip(client->name); | 
|  | if (!chip) { | 
|  | dev_err(&client->dev, "unknown chip type '%s'\n", | 
|  | client->name); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!i2c_check_functionality(adapter, | 
|  | I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) | 
|  | return -EIO; | 
|  |  | 
|  | if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ds1307->client = client; | 
|  | i2c_set_clientdata(client, ds1307); | 
|  |  | 
|  | ds1307->msg[0].addr = client->addr; | 
|  | ds1307->msg[0].flags = 0; | 
|  | ds1307->msg[0].len = 1; | 
|  | ds1307->msg[0].buf = &ds1307->reg_addr; | 
|  |  | 
|  | ds1307->msg[1].addr = client->addr; | 
|  | ds1307->msg[1].flags = I2C_M_RD; | 
|  | ds1307->msg[1].len = sizeof(ds1307->regs); | 
|  | ds1307->msg[1].buf = ds1307->regs; | 
|  |  | 
|  | ds1307->type = chip->type; | 
|  |  | 
|  | switch (ds1307->type) { | 
|  | case ds_1337: | 
|  | case ds_1339: | 
|  | ds1307->reg_addr = DS1337_REG_CONTROL; | 
|  | ds1307->msg[1].len = 2; | 
|  |  | 
|  | /* get registers that the "rtc" read below won't read... */ | 
|  | tmp = i2c_transfer(adapter, ds1307->msg, 2); | 
|  | if (tmp != 2) { | 
|  | pr_debug("read error %d\n", tmp); | 
|  | err = -EIO; | 
|  | goto exit_free; | 
|  | } | 
|  |  | 
|  | ds1307->reg_addr = 0; | 
|  | ds1307->msg[1].len = sizeof(ds1307->regs); | 
|  |  | 
|  | /* oscillator off?  turn it on, so clock can tick. */ | 
|  | if (ds1307->regs[0] & DS1337_BIT_nEOSC) | 
|  | i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, | 
|  | ds1307->regs[0] & ~DS1337_BIT_nEOSC); | 
|  |  | 
|  | /* oscillator fault?  clear flag, and warn */ | 
|  | if (ds1307->regs[1] & DS1337_BIT_OSF) { | 
|  | i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, | 
|  | ds1307->regs[1] & ~DS1337_BIT_OSF); | 
|  | dev_warn(&client->dev, "SET TIME!\n"); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | read_rtc: | 
|  | /* read RTC registers */ | 
|  |  | 
|  | tmp = i2c_transfer(adapter, ds1307->msg, 2); | 
|  | if (tmp != 2) { | 
|  | pr_debug("read error %d\n", tmp); | 
|  | err = -EIO; | 
|  | goto exit_free; | 
|  | } | 
|  |  | 
|  | /* minimal sanity checking; some chips (like DS1340) don't | 
|  | * specify the extra bits as must-be-zero, but there are | 
|  | * still a few values that are clearly out-of-range. | 
|  | */ | 
|  | tmp = ds1307->regs[DS1307_REG_SECS]; | 
|  | switch (ds1307->type) { | 
|  | case ds_1340: | 
|  | /* FIXME read register with DS1340_BIT_OSF, use that to | 
|  | * trigger the "set time" warning (*after* restarting the | 
|  | * oscillator!) instead of this weaker ds1307/m41t00 test. | 
|  | */ | 
|  | case ds_1307: | 
|  | case m41t00: | 
|  | /* clock halted?  turn it on, so clock can tick. */ | 
|  | if (tmp & DS1307_BIT_CH) { | 
|  | i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); | 
|  | dev_warn(&client->dev, "SET TIME!\n"); | 
|  | goto read_rtc; | 
|  | } | 
|  | break; | 
|  | case ds_1338: | 
|  | /* clock halted?  turn it on, so clock can tick. */ | 
|  | if (tmp & DS1307_BIT_CH) | 
|  | i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); | 
|  |  | 
|  | /* oscillator fault?  clear flag, and warn */ | 
|  | if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) { | 
|  | i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL, | 
|  | ds1307->regs[DS1307_REG_CONTROL] | 
|  | & ~DS1338_BIT_OSF); | 
|  | dev_warn(&client->dev, "SET TIME!\n"); | 
|  | goto read_rtc; | 
|  | } | 
|  | break; | 
|  | case ds_1337: | 
|  | case ds_1339: | 
|  | break; | 
|  | } | 
|  |  | 
|  | tmp = ds1307->regs[DS1307_REG_SECS]; | 
|  | tmp = BCD2BIN(tmp & 0x7f); | 
|  | if (tmp > 60) | 
|  | goto exit_bad; | 
|  | tmp = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | 
|  | if (tmp > 60) | 
|  | goto exit_bad; | 
|  |  | 
|  | tmp = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | 
|  | if (tmp == 0 || tmp > 31) | 
|  | goto exit_bad; | 
|  |  | 
|  | tmp = BCD2BIN(ds1307->regs[DS1307_REG_MONTH] & 0x1f); | 
|  | if (tmp == 0 || tmp > 12) | 
|  | goto exit_bad; | 
|  |  | 
|  | tmp = ds1307->regs[DS1307_REG_HOUR]; | 
|  | switch (ds1307->type) { | 
|  | case ds_1340: | 
|  | case m41t00: | 
|  | /* NOTE: ignores century bits; fix before deploying | 
|  | * systems that will run through year 2100. | 
|  | */ | 
|  | break; | 
|  | default: | 
|  | if (!(tmp & DS1307_BIT_12HR)) | 
|  | break; | 
|  |  | 
|  | /* Be sure we're in 24 hour mode.  Multi-master systems | 
|  | * take note... | 
|  | */ | 
|  | tmp = BCD2BIN(tmp & 0x1f); | 
|  | if (tmp == 12) | 
|  | tmp = 0; | 
|  | if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) | 
|  | tmp += 12; | 
|  | i2c_smbus_write_byte_data(client, | 
|  | DS1307_REG_HOUR, | 
|  | BIN2BCD(tmp)); | 
|  | } | 
|  |  | 
|  | ds1307->rtc = rtc_device_register(client->name, &client->dev, | 
|  | &ds13xx_rtc_ops, THIS_MODULE); | 
|  | if (IS_ERR(ds1307->rtc)) { | 
|  | err = PTR_ERR(ds1307->rtc); | 
|  | dev_err(&client->dev, | 
|  | "unable to register the class device\n"); | 
|  | goto exit_free; | 
|  | } | 
|  |  | 
|  | if (chip->nvram56) { | 
|  | err = sysfs_create_bin_file(&client->dev.kobj, &nvram); | 
|  | if (err == 0) { | 
|  | ds1307->has_nvram = true; | 
|  | dev_info(&client->dev, "56 bytes nvram\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | exit_bad: | 
|  | dev_dbg(&client->dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | 
|  | "bogus register", | 
|  | ds1307->regs[0], ds1307->regs[1], | 
|  | ds1307->regs[2], ds1307->regs[3], | 
|  | ds1307->regs[4], ds1307->regs[5], | 
|  | ds1307->regs[6]); | 
|  |  | 
|  | exit_free: | 
|  | kfree(ds1307); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __devexit ds1307_remove(struct i2c_client *client) | 
|  | { | 
|  | struct ds1307	*ds1307 = i2c_get_clientdata(client); | 
|  |  | 
|  | if (ds1307->has_nvram) | 
|  | sysfs_remove_bin_file(&client->dev.kobj, &nvram); | 
|  |  | 
|  | rtc_device_unregister(ds1307->rtc); | 
|  | kfree(ds1307); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct i2c_driver ds1307_driver = { | 
|  | .driver = { | 
|  | .name	= "rtc-ds1307", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | .probe		= ds1307_probe, | 
|  | .remove		= __devexit_p(ds1307_remove), | 
|  | }; | 
|  |  | 
|  | static int __init ds1307_init(void) | 
|  | { | 
|  | return i2c_add_driver(&ds1307_driver); | 
|  | } | 
|  | module_init(ds1307_init); | 
|  |  | 
|  | static void __exit ds1307_exit(void) | 
|  | { | 
|  | i2c_del_driver(&ds1307_driver); | 
|  | } | 
|  | module_exit(ds1307_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips"); | 
|  | MODULE_LICENSE("GPL"); |