|  | /* | 
|  | *  linux/arch/cris/mm/fault.c | 
|  | * | 
|  | *  Copyright (C) 2000-2006  Axis Communications AB | 
|  | * | 
|  | *  Authors:  Bjorn Wesen | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/mm.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/module.h> | 
|  | #include <asm/uaccess.h> | 
|  |  | 
|  | extern int find_fixup_code(struct pt_regs *); | 
|  | extern void die_if_kernel(const char *, struct pt_regs *, long); | 
|  |  | 
|  | /* debug of low-level TLB reload */ | 
|  | #undef DEBUG | 
|  |  | 
|  | #ifdef DEBUG | 
|  | #define D(x) x | 
|  | #else | 
|  | #define D(x) | 
|  | #endif | 
|  |  | 
|  | /* debug of higher-level faults */ | 
|  | #define DPG(x) | 
|  |  | 
|  | /* current active page directory */ | 
|  |  | 
|  | volatile DEFINE_PER_CPU(pgd_t *,current_pgd); | 
|  | unsigned long cris_signal_return_page; | 
|  |  | 
|  | /* | 
|  | * This routine handles page faults.  It determines the address, | 
|  | * and the problem, and then passes it off to one of the appropriate | 
|  | * routines. | 
|  | * | 
|  | * Notice that the address we're given is aligned to the page the fault | 
|  | * occurred in, since we only get the PFN in R_MMU_CAUSE not the complete | 
|  | * address. | 
|  | * | 
|  | * error_code: | 
|  | *      bit 0 == 0 means no page found, 1 means protection fault | 
|  | *      bit 1 == 0 means read, 1 means write | 
|  | * | 
|  | * If this routine detects a bad access, it returns 1, otherwise it | 
|  | * returns 0. | 
|  | */ | 
|  |  | 
|  | asmlinkage void | 
|  | do_page_fault(unsigned long address, struct pt_regs *regs, | 
|  | int protection, int writeaccess) | 
|  | { | 
|  | struct task_struct *tsk; | 
|  | struct mm_struct *mm; | 
|  | struct vm_area_struct * vma; | 
|  | siginfo_t info; | 
|  | int fault; | 
|  |  | 
|  | D(printk(KERN_DEBUG | 
|  | "Page fault for %lX on %X at %lX, prot %d write %d\n", | 
|  | address, smp_processor_id(), instruction_pointer(regs), | 
|  | protection, writeaccess)); | 
|  |  | 
|  | tsk = current; | 
|  |  | 
|  | /* | 
|  | * We fault-in kernel-space virtual memory on-demand. The | 
|  | * 'reference' page table is init_mm.pgd. | 
|  | * | 
|  | * NOTE! We MUST NOT take any locks for this case. We may | 
|  | * be in an interrupt or a critical region, and should | 
|  | * only copy the information from the master page table, | 
|  | * nothing more. | 
|  | * | 
|  | * NOTE2: This is done so that, when updating the vmalloc | 
|  | * mappings we don't have to walk all processes pgdirs and | 
|  | * add the high mappings all at once. Instead we do it as they | 
|  | * are used. However vmalloc'ed page entries have the PAGE_GLOBAL | 
|  | * bit set so sometimes the TLB can use a lingering entry. | 
|  | * | 
|  | * This verifies that the fault happens in kernel space | 
|  | * and that the fault was not a protection error (error_code & 1). | 
|  | */ | 
|  |  | 
|  | if (address >= VMALLOC_START && | 
|  | !protection && | 
|  | !user_mode(regs)) | 
|  | goto vmalloc_fault; | 
|  |  | 
|  | /* When stack execution is not allowed we store the signal | 
|  | * trampolines in the reserved cris_signal_return_page. | 
|  | * Handle this in the exact same way as vmalloc (we know | 
|  | * that the mapping is there and is valid so no need to | 
|  | * call handle_mm_fault). | 
|  | */ | 
|  | if (cris_signal_return_page && | 
|  | address == cris_signal_return_page && | 
|  | !protection && user_mode(regs)) | 
|  | goto vmalloc_fault; | 
|  |  | 
|  | /* we can and should enable interrupts at this point */ | 
|  | local_irq_enable(); | 
|  |  | 
|  | mm = tsk->mm; | 
|  | info.si_code = SEGV_MAPERR; | 
|  |  | 
|  | /* | 
|  | * If we're in an interrupt or have no user | 
|  | * context, we must not take the fault.. | 
|  | */ | 
|  |  | 
|  | if (in_interrupt() || !mm) | 
|  | goto no_context; | 
|  |  | 
|  | down_read(&mm->mmap_sem); | 
|  | vma = find_vma(mm, address); | 
|  | if (!vma) | 
|  | goto bad_area; | 
|  | if (vma->vm_start <= address) | 
|  | goto good_area; | 
|  | if (!(vma->vm_flags & VM_GROWSDOWN)) | 
|  | goto bad_area; | 
|  | if (user_mode(regs)) { | 
|  | /* | 
|  | * accessing the stack below usp is always a bug. | 
|  | * we get page-aligned addresses so we can only check | 
|  | * if we're within a page from usp, but that might be | 
|  | * enough to catch brutal errors at least. | 
|  | */ | 
|  | if (address + PAGE_SIZE < rdusp()) | 
|  | goto bad_area; | 
|  | } | 
|  | if (expand_stack(vma, address)) | 
|  | goto bad_area; | 
|  |  | 
|  | /* | 
|  | * Ok, we have a good vm_area for this memory access, so | 
|  | * we can handle it.. | 
|  | */ | 
|  |  | 
|  | good_area: | 
|  | info.si_code = SEGV_ACCERR; | 
|  |  | 
|  | /* first do some preliminary protection checks */ | 
|  |  | 
|  | if (writeaccess == 2){ | 
|  | if (!(vma->vm_flags & VM_EXEC)) | 
|  | goto bad_area; | 
|  | } else if (writeaccess == 1) { | 
|  | if (!(vma->vm_flags & VM_WRITE)) | 
|  | goto bad_area; | 
|  | } else { | 
|  | if (!(vma->vm_flags & (VM_READ | VM_EXEC))) | 
|  | goto bad_area; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If for any reason at all we couldn't handle the fault, | 
|  | * make sure we exit gracefully rather than endlessly redo | 
|  | * the fault. | 
|  | */ | 
|  |  | 
|  | fault = handle_mm_fault(mm, vma, address, writeaccess & 1); | 
|  | if (unlikely(fault & VM_FAULT_ERROR)) { | 
|  | if (fault & VM_FAULT_OOM) | 
|  | goto out_of_memory; | 
|  | else if (fault & VM_FAULT_SIGBUS) | 
|  | goto do_sigbus; | 
|  | BUG(); | 
|  | } | 
|  | if (fault & VM_FAULT_MAJOR) | 
|  | tsk->maj_flt++; | 
|  | else | 
|  | tsk->min_flt++; | 
|  |  | 
|  | up_read(&mm->mmap_sem); | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Something tried to access memory that isn't in our memory map.. | 
|  | * Fix it, but check if it's kernel or user first.. | 
|  | */ | 
|  |  | 
|  | bad_area: | 
|  | up_read(&mm->mmap_sem); | 
|  |  | 
|  | bad_area_nosemaphore: | 
|  | DPG(show_registers(regs)); | 
|  |  | 
|  | /* User mode accesses just cause a SIGSEGV */ | 
|  |  | 
|  | if (user_mode(regs)) { | 
|  | info.si_signo = SIGSEGV; | 
|  | info.si_errno = 0; | 
|  | /* info.si_code has been set above */ | 
|  | info.si_addr = (void *)address; | 
|  | force_sig_info(SIGSEGV, &info, tsk); | 
|  | printk(KERN_NOTICE "%s (pid %d) segfaults for page " | 
|  | "address %08lx at pc %08lx\n", | 
|  | tsk->comm, tsk->pid, address, instruction_pointer(regs)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | no_context: | 
|  |  | 
|  | /* Are we prepared to handle this kernel fault? | 
|  | * | 
|  | * (The kernel has valid exception-points in the source | 
|  | *  when it acesses user-memory. When it fails in one | 
|  | *  of those points, we find it in a table and do a jump | 
|  | *  to some fixup code that loads an appropriate error | 
|  | *  code) | 
|  | */ | 
|  |  | 
|  | if (find_fixup_code(regs)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Oops. The kernel tried to access some bad page. We'll have to | 
|  | * terminate things with extreme prejudice. | 
|  | */ | 
|  |  | 
|  | if (!oops_in_progress) { | 
|  | oops_in_progress = 1; | 
|  | if ((unsigned long) (address) < PAGE_SIZE) | 
|  | printk(KERN_ALERT "Unable to handle kernel NULL " | 
|  | "pointer dereference"); | 
|  | else | 
|  | printk(KERN_ALERT "Unable to handle kernel access" | 
|  | " at virtual address %08lx\n", address); | 
|  |  | 
|  | die_if_kernel("Oops", regs, (writeaccess << 1) | protection); | 
|  | oops_in_progress = 0; | 
|  | } | 
|  |  | 
|  | do_exit(SIGKILL); | 
|  |  | 
|  | /* | 
|  | * We ran out of memory, or some other thing happened to us that made | 
|  | * us unable to handle the page fault gracefully. | 
|  | */ | 
|  |  | 
|  | out_of_memory: | 
|  | up_read(&mm->mmap_sem); | 
|  | printk("VM: killing process %s\n", tsk->comm); | 
|  | if (user_mode(regs)) | 
|  | do_exit(SIGKILL); | 
|  | goto no_context; | 
|  |  | 
|  | do_sigbus: | 
|  | up_read(&mm->mmap_sem); | 
|  |  | 
|  | /* | 
|  | * Send a sigbus, regardless of whether we were in kernel | 
|  | * or user mode. | 
|  | */ | 
|  | info.si_signo = SIGBUS; | 
|  | info.si_errno = 0; | 
|  | info.si_code = BUS_ADRERR; | 
|  | info.si_addr = (void *)address; | 
|  | force_sig_info(SIGBUS, &info, tsk); | 
|  |  | 
|  | /* Kernel mode? Handle exceptions or die */ | 
|  | if (!user_mode(regs)) | 
|  | goto no_context; | 
|  | return; | 
|  |  | 
|  | vmalloc_fault: | 
|  | { | 
|  | /* | 
|  | * Synchronize this task's top level page-table | 
|  | * with the 'reference' page table. | 
|  | * | 
|  | * Use current_pgd instead of tsk->active_mm->pgd | 
|  | * since the latter might be unavailable if this | 
|  | * code is executed in a misfortunately run irq | 
|  | * (like inside schedule() between switch_mm and | 
|  | *  switch_to...). | 
|  | */ | 
|  |  | 
|  | int offset = pgd_index(address); | 
|  | pgd_t *pgd, *pgd_k; | 
|  | pud_t *pud, *pud_k; | 
|  | pmd_t *pmd, *pmd_k; | 
|  | pte_t *pte_k; | 
|  |  | 
|  | pgd = (pgd_t *)per_cpu(current_pgd, smp_processor_id()) + offset; | 
|  | pgd_k = init_mm.pgd + offset; | 
|  |  | 
|  | /* Since we're two-level, we don't need to do both | 
|  | * set_pgd and set_pmd (they do the same thing). If | 
|  | * we go three-level at some point, do the right thing | 
|  | * with pgd_present and set_pgd here. | 
|  | * | 
|  | * Also, since the vmalloc area is global, we don't | 
|  | * need to copy individual PTE's, it is enough to | 
|  | * copy the pgd pointer into the pte page of the | 
|  | * root task. If that is there, we'll find our pte if | 
|  | * it exists. | 
|  | */ | 
|  |  | 
|  | pud = pud_offset(pgd, address); | 
|  | pud_k = pud_offset(pgd_k, address); | 
|  | if (!pud_present(*pud_k)) | 
|  | goto no_context; | 
|  |  | 
|  | pmd = pmd_offset(pud, address); | 
|  | pmd_k = pmd_offset(pud_k, address); | 
|  |  | 
|  | if (!pmd_present(*pmd_k)) | 
|  | goto bad_area_nosemaphore; | 
|  |  | 
|  | set_pmd(pmd, *pmd_k); | 
|  |  | 
|  | /* Make sure the actual PTE exists as well to | 
|  | * catch kernel vmalloc-area accesses to non-mapped | 
|  | * addresses. If we don't do this, this will just | 
|  | * silently loop forever. | 
|  | */ | 
|  |  | 
|  | pte_k = pte_offset_kernel(pmd_k, address); | 
|  | if (!pte_present(*pte_k)) | 
|  | goto no_context; | 
|  |  | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Find fixup code. */ | 
|  | int | 
|  | find_fixup_code(struct pt_regs *regs) | 
|  | { | 
|  | const struct exception_table_entry *fixup; | 
|  |  | 
|  | if ((fixup = search_exception_tables(instruction_pointer(regs))) != 0) { | 
|  | /* Adjust the instruction pointer in the stackframe. */ | 
|  | instruction_pointer(regs) = fixup->fixup; | 
|  | arch_fixup(regs); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } |