|  | /* | 
|  | * wm8510.c  --  WM8510 ALSA Soc Audio driver | 
|  | * | 
|  | * Copyright 2006 Wolfson Microelectronics PLC. | 
|  | * | 
|  | * Author: Liam Girdwood <lrg@slimlogic.co.uk> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/pcm_params.h> | 
|  | #include <sound/soc.h> | 
|  | #include <sound/soc-dapm.h> | 
|  | #include <sound/initval.h> | 
|  |  | 
|  | #include "wm8510.h" | 
|  |  | 
|  | #define WM8510_VERSION "0.6" | 
|  |  | 
|  | struct snd_soc_codec_device soc_codec_dev_wm8510; | 
|  |  | 
|  | /* | 
|  | * wm8510 register cache | 
|  | * We can't read the WM8510 register space when we are | 
|  | * using 2 wire for device control, so we cache them instead. | 
|  | */ | 
|  | static const u16 wm8510_reg[WM8510_CACHEREGNUM] = { | 
|  | 0x0000, 0x0000, 0x0000, 0x0000, | 
|  | 0x0050, 0x0000, 0x0140, 0x0000, | 
|  | 0x0000, 0x0000, 0x0000, 0x00ff, | 
|  | 0x0000, 0x0000, 0x0100, 0x00ff, | 
|  | 0x0000, 0x0000, 0x012c, 0x002c, | 
|  | 0x002c, 0x002c, 0x002c, 0x0000, | 
|  | 0x0032, 0x0000, 0x0000, 0x0000, | 
|  | 0x0000, 0x0000, 0x0000, 0x0000, | 
|  | 0x0038, 0x000b, 0x0032, 0x0000, | 
|  | 0x0008, 0x000c, 0x0093, 0x00e9, | 
|  | 0x0000, 0x0000, 0x0000, 0x0000, | 
|  | 0x0003, 0x0010, 0x0000, 0x0000, | 
|  | 0x0000, 0x0002, 0x0001, 0x0000, | 
|  | 0x0000, 0x0000, 0x0039, 0x0000, | 
|  | 0x0001, | 
|  | }; | 
|  |  | 
|  | #define WM8510_POWER1_BIASEN  0x08 | 
|  | #define WM8510_POWER1_BUFIOEN 0x10 | 
|  |  | 
|  | /* | 
|  | * read wm8510 register cache | 
|  | */ | 
|  | static inline unsigned int wm8510_read_reg_cache(struct snd_soc_codec *codec, | 
|  | unsigned int reg) | 
|  | { | 
|  | u16 *cache = codec->reg_cache; | 
|  | if (reg == WM8510_RESET) | 
|  | return 0; | 
|  | if (reg >= WM8510_CACHEREGNUM) | 
|  | return -1; | 
|  | return cache[reg]; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * write wm8510 register cache | 
|  | */ | 
|  | static inline void wm8510_write_reg_cache(struct snd_soc_codec *codec, | 
|  | u16 reg, unsigned int value) | 
|  | { | 
|  | u16 *cache = codec->reg_cache; | 
|  | if (reg >= WM8510_CACHEREGNUM) | 
|  | return; | 
|  | cache[reg] = value; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * write to the WM8510 register space | 
|  | */ | 
|  | static int wm8510_write(struct snd_soc_codec *codec, unsigned int reg, | 
|  | unsigned int value) | 
|  | { | 
|  | u8 data[2]; | 
|  |  | 
|  | /* data is | 
|  | *   D15..D9 WM8510 register offset | 
|  | *   D8...D0 register data | 
|  | */ | 
|  | data[0] = (reg << 1) | ((value >> 8) & 0x0001); | 
|  | data[1] = value & 0x00ff; | 
|  |  | 
|  | wm8510_write_reg_cache(codec, reg, value); | 
|  | if (codec->hw_write(codec->control_data, data, 2) == 2) | 
|  | return 0; | 
|  | else | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | #define wm8510_reset(c)	wm8510_write(c, WM8510_RESET, 0) | 
|  |  | 
|  | static const char *wm8510_companding[] = { "Off", "NC", "u-law", "A-law" }; | 
|  | static const char *wm8510_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" }; | 
|  | static const char *wm8510_alc[] = { "ALC", "Limiter" }; | 
|  |  | 
|  | static const struct soc_enum wm8510_enum[] = { | 
|  | SOC_ENUM_SINGLE(WM8510_COMP, 1, 4, wm8510_companding), /* adc */ | 
|  | SOC_ENUM_SINGLE(WM8510_COMP, 3, 4, wm8510_companding), /* dac */ | 
|  | SOC_ENUM_SINGLE(WM8510_DAC,  4, 4, wm8510_deemp), | 
|  | SOC_ENUM_SINGLE(WM8510_ALC3,  8, 2, wm8510_alc), | 
|  | }; | 
|  |  | 
|  | static const struct snd_kcontrol_new wm8510_snd_controls[] = { | 
|  |  | 
|  | SOC_SINGLE("Digital Loopback Switch", WM8510_COMP, 0, 1, 0), | 
|  |  | 
|  | SOC_ENUM("DAC Companding", wm8510_enum[1]), | 
|  | SOC_ENUM("ADC Companding", wm8510_enum[0]), | 
|  |  | 
|  | SOC_ENUM("Playback De-emphasis", wm8510_enum[2]), | 
|  | SOC_SINGLE("DAC Inversion Switch", WM8510_DAC, 0, 1, 0), | 
|  |  | 
|  | SOC_SINGLE("Master Playback Volume", WM8510_DACVOL, 0, 127, 0), | 
|  |  | 
|  | SOC_SINGLE("High Pass Filter Switch", WM8510_ADC, 8, 1, 0), | 
|  | SOC_SINGLE("High Pass Cut Off", WM8510_ADC, 4, 7, 0), | 
|  | SOC_SINGLE("ADC Inversion Switch", WM8510_COMP, 0, 1, 0), | 
|  |  | 
|  | SOC_SINGLE("Capture Volume", WM8510_ADCVOL,  0, 127, 0), | 
|  |  | 
|  | SOC_SINGLE("DAC Playback Limiter Switch", WM8510_DACLIM1,  8, 1, 0), | 
|  | SOC_SINGLE("DAC Playback Limiter Decay", WM8510_DACLIM1,  4, 15, 0), | 
|  | SOC_SINGLE("DAC Playback Limiter Attack", WM8510_DACLIM1,  0, 15, 0), | 
|  |  | 
|  | SOC_SINGLE("DAC Playback Limiter Threshold", WM8510_DACLIM2,  4, 7, 0), | 
|  | SOC_SINGLE("DAC Playback Limiter Boost", WM8510_DACLIM2,  0, 15, 0), | 
|  |  | 
|  | SOC_SINGLE("ALC Enable Switch", WM8510_ALC1,  8, 1, 0), | 
|  | SOC_SINGLE("ALC Capture Max Gain", WM8510_ALC1,  3, 7, 0), | 
|  | SOC_SINGLE("ALC Capture Min Gain", WM8510_ALC1,  0, 7, 0), | 
|  |  | 
|  | SOC_SINGLE("ALC Capture ZC Switch", WM8510_ALC2,  8, 1, 0), | 
|  | SOC_SINGLE("ALC Capture Hold", WM8510_ALC2,  4, 7, 0), | 
|  | SOC_SINGLE("ALC Capture Target", WM8510_ALC2,  0, 15, 0), | 
|  |  | 
|  | SOC_ENUM("ALC Capture Mode", wm8510_enum[3]), | 
|  | SOC_SINGLE("ALC Capture Decay", WM8510_ALC3,  4, 15, 0), | 
|  | SOC_SINGLE("ALC Capture Attack", WM8510_ALC3,  0, 15, 0), | 
|  |  | 
|  | SOC_SINGLE("ALC Capture Noise Gate Switch", WM8510_NGATE,  3, 1, 0), | 
|  | SOC_SINGLE("ALC Capture Noise Gate Threshold", WM8510_NGATE,  0, 7, 0), | 
|  |  | 
|  | SOC_SINGLE("Capture PGA ZC Switch", WM8510_INPPGA,  7, 1, 0), | 
|  | SOC_SINGLE("Capture PGA Volume", WM8510_INPPGA,  0, 63, 0), | 
|  |  | 
|  | SOC_SINGLE("Speaker Playback ZC Switch", WM8510_SPKVOL,  7, 1, 0), | 
|  | SOC_SINGLE("Speaker Playback Switch", WM8510_SPKVOL,  6, 1, 1), | 
|  | SOC_SINGLE("Speaker Playback Volume", WM8510_SPKVOL,  0, 63, 0), | 
|  | SOC_SINGLE("Speaker Boost", WM8510_OUTPUT, 2, 1, 0), | 
|  |  | 
|  | SOC_SINGLE("Capture Boost(+20dB)", WM8510_ADCBOOST,  8, 1, 0), | 
|  | SOC_SINGLE("Mono Playback Switch", WM8510_MONOMIX, 6, 1, 1), | 
|  | }; | 
|  |  | 
|  | /* add non dapm controls */ | 
|  | static int wm8510_add_controls(struct snd_soc_codec *codec) | 
|  | { | 
|  | int err, i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(wm8510_snd_controls); i++) { | 
|  | err = snd_ctl_add(codec->card, | 
|  | snd_soc_cnew(&wm8510_snd_controls[i], codec, | 
|  | NULL)); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Speaker Output Mixer */ | 
|  | static const struct snd_kcontrol_new wm8510_speaker_mixer_controls[] = { | 
|  | SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_SPKMIX, 1, 1, 0), | 
|  | SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_SPKMIX, 5, 1, 0), | 
|  | SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_SPKMIX, 0, 1, 0), | 
|  | }; | 
|  |  | 
|  | /* Mono Output Mixer */ | 
|  | static const struct snd_kcontrol_new wm8510_mono_mixer_controls[] = { | 
|  | SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_MONOMIX, 1, 1, 0), | 
|  | SOC_DAPM_SINGLE("Aux Playback Switch", WM8510_MONOMIX, 2, 1, 0), | 
|  | SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_MONOMIX, 0, 1, 0), | 
|  | }; | 
|  |  | 
|  | static const struct snd_kcontrol_new wm8510_boost_controls[] = { | 
|  | SOC_DAPM_SINGLE("Mic PGA Switch", WM8510_INPPGA,  6, 1, 1), | 
|  | SOC_DAPM_SINGLE("Aux Volume", WM8510_ADCBOOST, 0, 7, 0), | 
|  | SOC_DAPM_SINGLE("Mic Volume", WM8510_ADCBOOST, 4, 7, 0), | 
|  | }; | 
|  |  | 
|  | static const struct snd_kcontrol_new wm8510_micpga_controls[] = { | 
|  | SOC_DAPM_SINGLE("MICP Switch", WM8510_INPUT, 0, 1, 0), | 
|  | SOC_DAPM_SINGLE("MICN Switch", WM8510_INPUT, 1, 1, 0), | 
|  | SOC_DAPM_SINGLE("AUX Switch", WM8510_INPUT, 2, 1, 0), | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_widget wm8510_dapm_widgets[] = { | 
|  | SND_SOC_DAPM_MIXER("Speaker Mixer", WM8510_POWER3, 2, 0, | 
|  | &wm8510_speaker_mixer_controls[0], | 
|  | ARRAY_SIZE(wm8510_speaker_mixer_controls)), | 
|  | SND_SOC_DAPM_MIXER("Mono Mixer", WM8510_POWER3, 3, 0, | 
|  | &wm8510_mono_mixer_controls[0], | 
|  | ARRAY_SIZE(wm8510_mono_mixer_controls)), | 
|  | SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8510_POWER3, 0, 0), | 
|  | SND_SOC_DAPM_ADC("ADC", "HiFi Capture", WM8510_POWER2, 0, 0), | 
|  | SND_SOC_DAPM_PGA("Aux Input", WM8510_POWER1, 6, 0, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("SpkN Out", WM8510_POWER3, 5, 0, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("SpkP Out", WM8510_POWER3, 6, 0, NULL, 0), | 
|  | SND_SOC_DAPM_PGA("Mono Out", WM8510_POWER3, 7, 0, NULL, 0), | 
|  |  | 
|  | SND_SOC_DAPM_MIXER("Mic PGA", WM8510_POWER2, 2, 0, | 
|  | &wm8510_micpga_controls[0], | 
|  | ARRAY_SIZE(wm8510_micpga_controls)), | 
|  | SND_SOC_DAPM_MIXER("Boost Mixer", WM8510_POWER2, 4, 0, | 
|  | &wm8510_boost_controls[0], | 
|  | ARRAY_SIZE(wm8510_boost_controls)), | 
|  |  | 
|  | SND_SOC_DAPM_MICBIAS("Mic Bias", WM8510_POWER1, 4, 0), | 
|  |  | 
|  | SND_SOC_DAPM_INPUT("MICN"), | 
|  | SND_SOC_DAPM_INPUT("MICP"), | 
|  | SND_SOC_DAPM_INPUT("AUX"), | 
|  | SND_SOC_DAPM_OUTPUT("MONOOUT"), | 
|  | SND_SOC_DAPM_OUTPUT("SPKOUTP"), | 
|  | SND_SOC_DAPM_OUTPUT("SPKOUTN"), | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route audio_map[] = { | 
|  | /* Mono output mixer */ | 
|  | {"Mono Mixer", "PCM Playback Switch", "DAC"}, | 
|  | {"Mono Mixer", "Aux Playback Switch", "Aux Input"}, | 
|  | {"Mono Mixer", "Line Bypass Switch", "Boost Mixer"}, | 
|  |  | 
|  | /* Speaker output mixer */ | 
|  | {"Speaker Mixer", "PCM Playback Switch", "DAC"}, | 
|  | {"Speaker Mixer", "Aux Playback Switch", "Aux Input"}, | 
|  | {"Speaker Mixer", "Line Bypass Switch", "Boost Mixer"}, | 
|  |  | 
|  | /* Outputs */ | 
|  | {"Mono Out", NULL, "Mono Mixer"}, | 
|  | {"MONOOUT", NULL, "Mono Out"}, | 
|  | {"SpkN Out", NULL, "Speaker Mixer"}, | 
|  | {"SpkP Out", NULL, "Speaker Mixer"}, | 
|  | {"SPKOUTN", NULL, "SpkN Out"}, | 
|  | {"SPKOUTP", NULL, "SpkP Out"}, | 
|  |  | 
|  | /* Microphone PGA */ | 
|  | {"Mic PGA", "MICN Switch", "MICN"}, | 
|  | {"Mic PGA", "MICP Switch", "MICP"}, | 
|  | { "Mic PGA", "AUX Switch", "Aux Input" }, | 
|  |  | 
|  | /* Boost Mixer */ | 
|  | {"Boost Mixer", "Mic PGA Switch", "Mic PGA"}, | 
|  | {"Boost Mixer", "Mic Volume", "MICP"}, | 
|  | {"Boost Mixer", "Aux Volume", "Aux Input"}, | 
|  |  | 
|  | {"ADC", NULL, "Boost Mixer"}, | 
|  | }; | 
|  |  | 
|  | static int wm8510_add_widgets(struct snd_soc_codec *codec) | 
|  | { | 
|  | snd_soc_dapm_new_controls(codec, wm8510_dapm_widgets, | 
|  | ARRAY_SIZE(wm8510_dapm_widgets)); | 
|  |  | 
|  | snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); | 
|  |  | 
|  | snd_soc_dapm_new_widgets(codec); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct pll_ { | 
|  | unsigned int pre_div:4; /* prescale - 1 */ | 
|  | unsigned int n:4; | 
|  | unsigned int k; | 
|  | }; | 
|  |  | 
|  | static struct pll_ pll_div; | 
|  |  | 
|  | /* The size in bits of the pll divide multiplied by 10 | 
|  | * to allow rounding later */ | 
|  | #define FIXED_PLL_SIZE ((1 << 24) * 10) | 
|  |  | 
|  | static void pll_factors(unsigned int target, unsigned int source) | 
|  | { | 
|  | unsigned long long Kpart; | 
|  | unsigned int K, Ndiv, Nmod; | 
|  |  | 
|  | Ndiv = target / source; | 
|  | if (Ndiv < 6) { | 
|  | source >>= 1; | 
|  | pll_div.pre_div = 1; | 
|  | Ndiv = target / source; | 
|  | } else | 
|  | pll_div.pre_div = 0; | 
|  |  | 
|  | if ((Ndiv < 6) || (Ndiv > 12)) | 
|  | printk(KERN_WARNING | 
|  | "WM8510 N value %d outwith recommended range!d\n", | 
|  | Ndiv); | 
|  |  | 
|  | pll_div.n = Ndiv; | 
|  | Nmod = target % source; | 
|  | Kpart = FIXED_PLL_SIZE * (long long)Nmod; | 
|  |  | 
|  | do_div(Kpart, source); | 
|  |  | 
|  | K = Kpart & 0xFFFFFFFF; | 
|  |  | 
|  | /* Check if we need to round */ | 
|  | if ((K % 10) >= 5) | 
|  | K += 5; | 
|  |  | 
|  | /* Move down to proper range now rounding is done */ | 
|  | K /= 10; | 
|  |  | 
|  | pll_div.k = K; | 
|  | } | 
|  |  | 
|  | static int wm8510_set_dai_pll(struct snd_soc_dai *codec_dai, | 
|  | int pll_id, unsigned int freq_in, unsigned int freq_out) | 
|  | { | 
|  | struct snd_soc_codec *codec = codec_dai->codec; | 
|  | u16 reg; | 
|  |  | 
|  | if (freq_in == 0 || freq_out == 0) { | 
|  | /* Clock CODEC directly from MCLK */ | 
|  | reg = wm8510_read_reg_cache(codec, WM8510_CLOCK); | 
|  | wm8510_write(codec, WM8510_CLOCK, reg & 0x0ff); | 
|  |  | 
|  | /* Turn off PLL */ | 
|  | reg = wm8510_read_reg_cache(codec, WM8510_POWER1); | 
|  | wm8510_write(codec, WM8510_POWER1, reg & 0x1df); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | pll_factors(freq_out*8, freq_in); | 
|  |  | 
|  | wm8510_write(codec, WM8510_PLLN, (pll_div.pre_div << 4) | pll_div.n); | 
|  | wm8510_write(codec, WM8510_PLLK1, pll_div.k >> 18); | 
|  | wm8510_write(codec, WM8510_PLLK2, (pll_div.k >> 9) & 0x1ff); | 
|  | wm8510_write(codec, WM8510_PLLK3, pll_div.k & 0x1ff); | 
|  | reg = wm8510_read_reg_cache(codec, WM8510_POWER1); | 
|  | wm8510_write(codec, WM8510_POWER1, reg | 0x020); | 
|  |  | 
|  | /* Run CODEC from PLL instead of MCLK */ | 
|  | reg = wm8510_read_reg_cache(codec, WM8510_CLOCK); | 
|  | wm8510_write(codec, WM8510_CLOCK, reg | 0x100); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Configure WM8510 clock dividers. | 
|  | */ | 
|  | static int wm8510_set_dai_clkdiv(struct snd_soc_dai *codec_dai, | 
|  | int div_id, int div) | 
|  | { | 
|  | struct snd_soc_codec *codec = codec_dai->codec; | 
|  | u16 reg; | 
|  |  | 
|  | switch (div_id) { | 
|  | case WM8510_OPCLKDIV: | 
|  | reg = wm8510_read_reg_cache(codec, WM8510_GPIO) & 0x1cf; | 
|  | wm8510_write(codec, WM8510_GPIO, reg | div); | 
|  | break; | 
|  | case WM8510_MCLKDIV: | 
|  | reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1f; | 
|  | wm8510_write(codec, WM8510_CLOCK, reg | div); | 
|  | break; | 
|  | case WM8510_ADCCLK: | 
|  | reg = wm8510_read_reg_cache(codec, WM8510_ADC) & 0x1f7; | 
|  | wm8510_write(codec, WM8510_ADC, reg | div); | 
|  | break; | 
|  | case WM8510_DACCLK: | 
|  | reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0x1f7; | 
|  | wm8510_write(codec, WM8510_DAC, reg | div); | 
|  | break; | 
|  | case WM8510_BCLKDIV: | 
|  | reg = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1e3; | 
|  | wm8510_write(codec, WM8510_CLOCK, reg | div); | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8510_set_dai_fmt(struct snd_soc_dai *codec_dai, | 
|  | unsigned int fmt) | 
|  | { | 
|  | struct snd_soc_codec *codec = codec_dai->codec; | 
|  | u16 iface = 0; | 
|  | u16 clk = wm8510_read_reg_cache(codec, WM8510_CLOCK) & 0x1fe; | 
|  |  | 
|  | /* set master/slave audio interface */ | 
|  | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | 
|  | case SND_SOC_DAIFMT_CBM_CFM: | 
|  | clk |= 0x0001; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_CBS_CFS: | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* interface format */ | 
|  | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | 
|  | case SND_SOC_DAIFMT_I2S: | 
|  | iface |= 0x0010; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_RIGHT_J: | 
|  | break; | 
|  | case SND_SOC_DAIFMT_LEFT_J: | 
|  | iface |= 0x0008; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_DSP_A: | 
|  | iface |= 0x00018; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* clock inversion */ | 
|  | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | 
|  | case SND_SOC_DAIFMT_NB_NF: | 
|  | break; | 
|  | case SND_SOC_DAIFMT_IB_IF: | 
|  | iface |= 0x0180; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_IB_NF: | 
|  | iface |= 0x0100; | 
|  | break; | 
|  | case SND_SOC_DAIFMT_NB_IF: | 
|  | iface |= 0x0080; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | wm8510_write(codec, WM8510_IFACE, iface); | 
|  | wm8510_write(codec, WM8510_CLOCK, clk); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *params) | 
|  | { | 
|  | struct snd_soc_pcm_runtime *rtd = substream->private_data; | 
|  | struct snd_soc_device *socdev = rtd->socdev; | 
|  | struct snd_soc_codec *codec = socdev->codec; | 
|  | u16 iface = wm8510_read_reg_cache(codec, WM8510_IFACE) & 0x19f; | 
|  | u16 adn = wm8510_read_reg_cache(codec, WM8510_ADD) & 0x1f1; | 
|  |  | 
|  | /* bit size */ | 
|  | switch (params_format(params)) { | 
|  | case SNDRV_PCM_FORMAT_S16_LE: | 
|  | break; | 
|  | case SNDRV_PCM_FORMAT_S20_3LE: | 
|  | iface |= 0x0020; | 
|  | break; | 
|  | case SNDRV_PCM_FORMAT_S24_LE: | 
|  | iface |= 0x0040; | 
|  | break; | 
|  | case SNDRV_PCM_FORMAT_S32_LE: | 
|  | iface |= 0x0060; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* filter coefficient */ | 
|  | switch (params_rate(params)) { | 
|  | case SNDRV_PCM_RATE_8000: | 
|  | adn |= 0x5 << 1; | 
|  | break; | 
|  | case SNDRV_PCM_RATE_11025: | 
|  | adn |= 0x4 << 1; | 
|  | break; | 
|  | case SNDRV_PCM_RATE_16000: | 
|  | adn |= 0x3 << 1; | 
|  | break; | 
|  | case SNDRV_PCM_RATE_22050: | 
|  | adn |= 0x2 << 1; | 
|  | break; | 
|  | case SNDRV_PCM_RATE_32000: | 
|  | adn |= 0x1 << 1; | 
|  | break; | 
|  | case SNDRV_PCM_RATE_44100: | 
|  | case SNDRV_PCM_RATE_48000: | 
|  | break; | 
|  | } | 
|  |  | 
|  | wm8510_write(codec, WM8510_IFACE, iface); | 
|  | wm8510_write(codec, WM8510_ADD, adn); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8510_mute(struct snd_soc_dai *dai, int mute) | 
|  | { | 
|  | struct snd_soc_codec *codec = dai->codec; | 
|  | u16 mute_reg = wm8510_read_reg_cache(codec, WM8510_DAC) & 0xffbf; | 
|  |  | 
|  | if (mute) | 
|  | wm8510_write(codec, WM8510_DAC, mute_reg | 0x40); | 
|  | else | 
|  | wm8510_write(codec, WM8510_DAC, mute_reg); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* liam need to make this lower power with dapm */ | 
|  | static int wm8510_set_bias_level(struct snd_soc_codec *codec, | 
|  | enum snd_soc_bias_level level) | 
|  | { | 
|  | u16 power1 = wm8510_read_reg_cache(codec, WM8510_POWER1) & ~0x3; | 
|  |  | 
|  | switch (level) { | 
|  | case SND_SOC_BIAS_ON: | 
|  | case SND_SOC_BIAS_PREPARE: | 
|  | power1 |= 0x1;  /* VMID 50k */ | 
|  | wm8510_write(codec, WM8510_POWER1, power1); | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_STANDBY: | 
|  | power1 |= WM8510_POWER1_BIASEN | WM8510_POWER1_BUFIOEN; | 
|  |  | 
|  | if (codec->bias_level == SND_SOC_BIAS_OFF) { | 
|  | /* Initial cap charge at VMID 5k */ | 
|  | wm8510_write(codec, WM8510_POWER1, power1 | 0x3); | 
|  | mdelay(100); | 
|  | } | 
|  |  | 
|  | power1 |= 0x2;  /* VMID 500k */ | 
|  | wm8510_write(codec, WM8510_POWER1, power1); | 
|  | break; | 
|  |  | 
|  | case SND_SOC_BIAS_OFF: | 
|  | wm8510_write(codec, WM8510_POWER1, 0); | 
|  | wm8510_write(codec, WM8510_POWER2, 0); | 
|  | wm8510_write(codec, WM8510_POWER3, 0); | 
|  | break; | 
|  | } | 
|  |  | 
|  | codec->bias_level = level; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define WM8510_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ | 
|  | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ | 
|  | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) | 
|  |  | 
|  | #define WM8510_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ | 
|  | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) | 
|  |  | 
|  | struct snd_soc_dai wm8510_dai = { | 
|  | .name = "WM8510 HiFi", | 
|  | .playback = { | 
|  | .stream_name = "Playback", | 
|  | .channels_min = 2, | 
|  | .channels_max = 2, | 
|  | .rates = WM8510_RATES, | 
|  | .formats = WM8510_FORMATS,}, | 
|  | .capture = { | 
|  | .stream_name = "Capture", | 
|  | .channels_min = 2, | 
|  | .channels_max = 2, | 
|  | .rates = WM8510_RATES, | 
|  | .formats = WM8510_FORMATS,}, | 
|  | .ops = { | 
|  | .hw_params = wm8510_pcm_hw_params, | 
|  | }, | 
|  | .dai_ops = { | 
|  | .digital_mute = wm8510_mute, | 
|  | .set_fmt = wm8510_set_dai_fmt, | 
|  | .set_clkdiv = wm8510_set_dai_clkdiv, | 
|  | .set_pll = wm8510_set_dai_pll, | 
|  | }, | 
|  | }; | 
|  | EXPORT_SYMBOL_GPL(wm8510_dai); | 
|  |  | 
|  | static int wm8510_suspend(struct platform_device *pdev, pm_message_t state) | 
|  | { | 
|  | struct snd_soc_device *socdev = platform_get_drvdata(pdev); | 
|  | struct snd_soc_codec *codec = socdev->codec; | 
|  |  | 
|  | wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wm8510_resume(struct platform_device *pdev) | 
|  | { | 
|  | struct snd_soc_device *socdev = platform_get_drvdata(pdev); | 
|  | struct snd_soc_codec *codec = socdev->codec; | 
|  | int i; | 
|  | u8 data[2]; | 
|  | u16 *cache = codec->reg_cache; | 
|  |  | 
|  | /* Sync reg_cache with the hardware */ | 
|  | for (i = 0; i < ARRAY_SIZE(wm8510_reg); i++) { | 
|  | data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001); | 
|  | data[1] = cache[i] & 0x00ff; | 
|  | codec->hw_write(codec->control_data, data, 2); | 
|  | } | 
|  | wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY); | 
|  | wm8510_set_bias_level(codec, codec->suspend_bias_level); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * initialise the WM8510 driver | 
|  | * register the mixer and dsp interfaces with the kernel | 
|  | */ | 
|  | static int wm8510_init(struct snd_soc_device *socdev) | 
|  | { | 
|  | struct snd_soc_codec *codec = socdev->codec; | 
|  | int ret = 0; | 
|  |  | 
|  | codec->name = "WM8510"; | 
|  | codec->owner = THIS_MODULE; | 
|  | codec->read = wm8510_read_reg_cache; | 
|  | codec->write = wm8510_write; | 
|  | codec->set_bias_level = wm8510_set_bias_level; | 
|  | codec->dai = &wm8510_dai; | 
|  | codec->num_dai = 1; | 
|  | codec->reg_cache_size = ARRAY_SIZE(wm8510_reg); | 
|  | codec->reg_cache = kmemdup(wm8510_reg, sizeof(wm8510_reg), GFP_KERNEL); | 
|  |  | 
|  | if (codec->reg_cache == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | wm8510_reset(codec); | 
|  |  | 
|  | /* register pcms */ | 
|  | ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); | 
|  | if (ret < 0) { | 
|  | printk(KERN_ERR "wm8510: failed to create pcms\n"); | 
|  | goto pcm_err; | 
|  | } | 
|  |  | 
|  | /* power on device */ | 
|  | codec->bias_level = SND_SOC_BIAS_OFF; | 
|  | wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY); | 
|  | wm8510_add_controls(codec); | 
|  | wm8510_add_widgets(codec); | 
|  | ret = snd_soc_register_card(socdev); | 
|  | if (ret < 0) { | 
|  | printk(KERN_ERR "wm8510: failed to register card\n"); | 
|  | goto card_err; | 
|  | } | 
|  | return ret; | 
|  |  | 
|  | card_err: | 
|  | snd_soc_free_pcms(socdev); | 
|  | snd_soc_dapm_free(socdev); | 
|  | pcm_err: | 
|  | kfree(codec->reg_cache); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct snd_soc_device *wm8510_socdev; | 
|  |  | 
|  | #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) | 
|  |  | 
|  | /* | 
|  | * WM8510 2 wire address is 0x1a | 
|  | */ | 
|  |  | 
|  | static int wm8510_i2c_probe(struct i2c_client *i2c, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct snd_soc_device *socdev = wm8510_socdev; | 
|  | struct snd_soc_codec *codec = socdev->codec; | 
|  | int ret; | 
|  |  | 
|  | i2c_set_clientdata(i2c, codec); | 
|  | codec->control_data = i2c; | 
|  |  | 
|  | ret = wm8510_init(socdev); | 
|  | if (ret < 0) | 
|  | pr_err("failed to initialise WM8510\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int wm8510_i2c_remove(struct i2c_client *client) | 
|  | { | 
|  | struct snd_soc_codec *codec = i2c_get_clientdata(client); | 
|  | kfree(codec->reg_cache); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id wm8510_i2c_id[] = { | 
|  | { "wm8510", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, wm8510_i2c_id); | 
|  |  | 
|  | static struct i2c_driver wm8510_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "WM8510 I2C Codec", | 
|  | .owner = THIS_MODULE, | 
|  | }, | 
|  | .probe =    wm8510_i2c_probe, | 
|  | .remove =   wm8510_i2c_remove, | 
|  | .id_table = wm8510_i2c_id, | 
|  | }; | 
|  |  | 
|  | static int wm8510_add_i2c_device(struct platform_device *pdev, | 
|  | const struct wm8510_setup_data *setup) | 
|  | { | 
|  | struct i2c_board_info info; | 
|  | struct i2c_adapter *adapter; | 
|  | struct i2c_client *client; | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_add_driver(&wm8510_i2c_driver); | 
|  | if (ret != 0) { | 
|  | dev_err(&pdev->dev, "can't add i2c driver\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | memset(&info, 0, sizeof(struct i2c_board_info)); | 
|  | info.addr = setup->i2c_address; | 
|  | strlcpy(info.type, "wm8510", I2C_NAME_SIZE); | 
|  |  | 
|  | adapter = i2c_get_adapter(setup->i2c_bus); | 
|  | if (!adapter) { | 
|  | dev_err(&pdev->dev, "can't get i2c adapter %d\n", | 
|  | setup->i2c_bus); | 
|  | goto err_driver; | 
|  | } | 
|  |  | 
|  | client = i2c_new_device(adapter, &info); | 
|  | i2c_put_adapter(adapter); | 
|  | if (!client) { | 
|  | dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", | 
|  | (unsigned int)info.addr); | 
|  | goto err_driver; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_driver: | 
|  | i2c_del_driver(&wm8510_i2c_driver); | 
|  | return -ENODEV; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_SPI_MASTER) | 
|  | static int __devinit wm8510_spi_probe(struct spi_device *spi) | 
|  | { | 
|  | struct snd_soc_device *socdev = wm8510_socdev; | 
|  | struct snd_soc_codec *codec = socdev->codec; | 
|  | int ret; | 
|  |  | 
|  | codec->control_data = spi; | 
|  |  | 
|  | ret = wm8510_init(socdev); | 
|  | if (ret < 0) | 
|  | dev_err(&spi->dev, "failed to initialise WM8510\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit wm8510_spi_remove(struct spi_device *spi) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct spi_driver wm8510_spi_driver = { | 
|  | .driver = { | 
|  | .name	= "wm8510", | 
|  | .bus	= &spi_bus_type, | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | .probe		= wm8510_spi_probe, | 
|  | .remove		= __devexit_p(wm8510_spi_remove), | 
|  | }; | 
|  |  | 
|  | static int wm8510_spi_write(struct spi_device *spi, const char *data, int len) | 
|  | { | 
|  | struct spi_transfer t; | 
|  | struct spi_message m; | 
|  | u8 msg[2]; | 
|  |  | 
|  | if (len <= 0) | 
|  | return 0; | 
|  |  | 
|  | msg[0] = data[0]; | 
|  | msg[1] = data[1]; | 
|  |  | 
|  | spi_message_init(&m); | 
|  | memset(&t, 0, (sizeof t)); | 
|  |  | 
|  | t.tx_buf = &msg[0]; | 
|  | t.len = len; | 
|  |  | 
|  | spi_message_add_tail(&t, &m); | 
|  | spi_sync(spi, &m); | 
|  |  | 
|  | return len; | 
|  | } | 
|  | #endif /* CONFIG_SPI_MASTER */ | 
|  |  | 
|  | static int wm8510_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct snd_soc_device *socdev = platform_get_drvdata(pdev); | 
|  | struct wm8510_setup_data *setup; | 
|  | struct snd_soc_codec *codec; | 
|  | int ret = 0; | 
|  |  | 
|  | pr_info("WM8510 Audio Codec %s", WM8510_VERSION); | 
|  |  | 
|  | setup = socdev->codec_data; | 
|  | codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); | 
|  | if (codec == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | socdev->codec = codec; | 
|  | mutex_init(&codec->mutex); | 
|  | INIT_LIST_HEAD(&codec->dapm_widgets); | 
|  | INIT_LIST_HEAD(&codec->dapm_paths); | 
|  |  | 
|  | wm8510_socdev = socdev; | 
|  | #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) | 
|  | if (setup->i2c_address) { | 
|  | codec->hw_write = (hw_write_t)i2c_master_send; | 
|  | ret = wm8510_add_i2c_device(pdev, setup); | 
|  | } | 
|  | #endif | 
|  | #if defined(CONFIG_SPI_MASTER) | 
|  | if (setup->spi) { | 
|  | codec->hw_write = (hw_write_t)wm8510_spi_write; | 
|  | ret = spi_register_driver(&wm8510_spi_driver); | 
|  | if (ret != 0) | 
|  | printk(KERN_ERR "can't add spi driver"); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (ret != 0) | 
|  | kfree(codec); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* power down chip */ | 
|  | static int wm8510_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct snd_soc_device *socdev = platform_get_drvdata(pdev); | 
|  | struct snd_soc_codec *codec = socdev->codec; | 
|  |  | 
|  | if (codec->control_data) | 
|  | wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF); | 
|  |  | 
|  | snd_soc_free_pcms(socdev); | 
|  | snd_soc_dapm_free(socdev); | 
|  | #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) | 
|  | i2c_unregister_device(codec->control_data); | 
|  | i2c_del_driver(&wm8510_i2c_driver); | 
|  | #endif | 
|  | #if defined(CONFIG_SPI_MASTER) | 
|  | spi_unregister_driver(&wm8510_spi_driver); | 
|  | #endif | 
|  | kfree(codec); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct snd_soc_codec_device soc_codec_dev_wm8510 = { | 
|  | .probe = 	wm8510_probe, | 
|  | .remove = 	wm8510_remove, | 
|  | .suspend = 	wm8510_suspend, | 
|  | .resume =	wm8510_resume, | 
|  | }; | 
|  | EXPORT_SYMBOL_GPL(soc_codec_dev_wm8510); | 
|  |  | 
|  | MODULE_DESCRIPTION("ASoC WM8510 driver"); | 
|  | MODULE_AUTHOR("Liam Girdwood"); | 
|  | MODULE_LICENSE("GPL"); |