| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/mfd/wcd9xxx/core.h> |
| #include <linux/bitops.h> |
| #include <linux/slab.h> |
| #include <linux/clk.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/soc.h> |
| #include <sound/apr_audio.h> |
| #include <sound/q6afe.h> |
| #include <sound/msm-dai-q6.h> |
| #include <sound/pcm_params.h> |
| #include <mach/clk.h> |
| |
| enum { |
| STATUS_PORT_STARTED, /* track if AFE port has started */ |
| STATUS_MAX |
| }; |
| |
| struct msm_dai_q6_dai_data { |
| DECLARE_BITMAP(status_mask, STATUS_MAX); |
| u32 rate; |
| u32 channels; |
| u32 bitwidth; |
| union afe_port_config port_config; |
| }; |
| |
| struct msm_dai_q6_mi2s_dai_config { |
| u16 pdata_mi2s_lines; |
| struct msm_dai_q6_dai_data mi2s_dai_data; |
| }; |
| |
| struct msm_dai_q6_mi2s_dai_data { |
| struct msm_dai_q6_mi2s_dai_config tx_dai; |
| struct msm_dai_q6_mi2s_dai_config rx_dai; |
| struct snd_pcm_hw_constraint_list rate_constraint; |
| struct snd_pcm_hw_constraint_list bitwidth_constraint; |
| }; |
| |
| static struct clk *pcm_clk; |
| static struct clk *sec_pcm_clk; |
| static DEFINE_MUTEX(aux_pcm_mutex); |
| static int aux_pcm_count; |
| static struct msm_dai_auxpcm_pdata *auxpcm_plat_data; |
| static struct msm_dai_auxpcm_pdata *sec_auxpcm_plat_data; |
| |
| static int msm_dai_q6_mi2s_format_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| |
| struct msm_dai_q6_dai_data *dai_data = kcontrol->private_data; |
| int value = ucontrol->value.integer.value[0]; |
| dai_data->port_config.mi2s.format = value; |
| pr_debug("%s: value = %d, channel = %d, line = %d\n", |
| __func__, value, dai_data->port_config.mi2s.channel, |
| dai_data->port_config.mi2s.line); |
| return 0; |
| } |
| |
| static int msm_dai_q6_mi2s_format_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| |
| struct msm_dai_q6_dai_data *dai_data = kcontrol->private_data; |
| ucontrol->value.integer.value[0] = dai_data->port_config.mi2s.format ; |
| return 0; |
| } |
| |
| |
| /* MI2S format field for AFE_PORT_CMD_I2S_CONFIG command |
| * 0: linear PCM |
| * 1: non-linear PCM |
| * 2: PCM data in IEC 60968 container |
| * 3: compressed data in IEC 60958 container |
| */ |
| static const char *mi2s_format[] = { |
| "LPCM", |
| "Compr", |
| "LPCM-60958", |
| "Compr-60958"}; |
| |
| static const struct soc_enum mi2s_config_enum[] = { |
| SOC_ENUM_SINGLE_EXT(4, mi2s_format), |
| }; |
| |
| static const struct snd_kcontrol_new mi2s_config_controls[] = { |
| SOC_ENUM_EXT("MI2S RX Format", mi2s_config_enum[0], |
| msm_dai_q6_mi2s_format_get, |
| msm_dai_q6_mi2s_format_put), |
| SOC_ENUM_EXT("SEC RX Format", mi2s_config_enum[0], |
| msm_dai_q6_mi2s_format_get, |
| msm_dai_q6_mi2s_format_put), |
| SOC_ENUM_EXT("MI2S TX Format", mi2s_config_enum[0], |
| msm_dai_q6_mi2s_format_get, |
| msm_dai_q6_mi2s_format_put), |
| }; |
| |
| static u8 num_of_bits_set(u8 sd_line_mask) |
| { |
| u8 num_bits_set = 0; |
| |
| while (sd_line_mask) { |
| num_bits_set++; |
| sd_line_mask = sd_line_mask & (sd_line_mask - 1); |
| } |
| return num_bits_set; |
| } |
| |
| static int msm_dai_q6_mi2s_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_mi2s_dai_data *mi2s_dai_data = |
| dev_get_drvdata(dai->dev); |
| |
| dev_dbg(dai->dev, "%s: cnst list %p\n", __func__, |
| mi2s_dai_data->rate_constraint.list); |
| |
| if (mi2s_dai_data->rate_constraint.list) { |
| snd_pcm_hw_constraint_list(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, |
| &mi2s_dai_data->rate_constraint); |
| snd_pcm_hw_constraint_list(substream->runtime, 0, |
| SNDRV_PCM_HW_PARAM_SAMPLE_BITS, |
| &mi2s_dai_data->bitwidth_constraint); |
| } |
| |
| return 0; |
| } |
| |
| static int msm_dai_q6_mi2s_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_mi2s_dai_data *mi2s_dai_data = |
| dev_get_drvdata(dai->dev); |
| struct msm_dai_q6_mi2s_dai_config *mi2s_dai_config = |
| (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? |
| &mi2s_dai_data->rx_dai : &mi2s_dai_data->tx_dai); |
| struct msm_dai_q6_dai_data *dai_data = &mi2s_dai_config->mi2s_dai_data; |
| |
| dai_data->channels = params_channels(params); |
| switch (dai_data->channels) { |
| case 8: |
| case 7: |
| if (mi2s_dai_config->pdata_mi2s_lines < AFE_I2S_8CHS) |
| goto error_invalid_data; |
| dai_data->port_config.mi2s.line = AFE_I2S_8CHS; |
| break; |
| case 6: |
| case 5: |
| if (mi2s_dai_config->pdata_mi2s_lines < AFE_I2S_6CHS) |
| goto error_invalid_data; |
| dai_data->port_config.mi2s.line = AFE_I2S_6CHS; |
| break; |
| case 4: |
| case 3: |
| if (mi2s_dai_config->pdata_mi2s_lines < AFE_I2S_QUAD01) |
| goto error_invalid_data; |
| if (mi2s_dai_config->pdata_mi2s_lines == AFE_I2S_QUAD23) |
| dai_data->port_config.mi2s.line = |
| mi2s_dai_config->pdata_mi2s_lines; |
| else |
| dai_data->port_config.mi2s.line = AFE_I2S_QUAD01; |
| break; |
| case 2: |
| case 1: |
| if (mi2s_dai_config->pdata_mi2s_lines < AFE_I2S_SD0) |
| goto error_invalid_data; |
| switch (mi2s_dai_config->pdata_mi2s_lines) { |
| case AFE_I2S_SD0: |
| case AFE_I2S_SD1: |
| case AFE_I2S_SD2: |
| case AFE_I2S_SD3: |
| dai_data->port_config.mi2s.line = |
| mi2s_dai_config->pdata_mi2s_lines; |
| break; |
| case AFE_I2S_QUAD01: |
| case AFE_I2S_6CHS: |
| case AFE_I2S_8CHS: |
| dai_data->port_config.mi2s.line = AFE_I2S_SD0; |
| break; |
| case AFE_I2S_QUAD23: |
| dai_data->port_config.mi2s.line = AFE_I2S_SD2; |
| break; |
| } |
| if (dai_data->channels == 2) |
| dai_data->port_config.mi2s.channel = MSM_AFE_STEREO; |
| else |
| dai_data->port_config.mi2s.channel = MSM_AFE_MONO; |
| break; |
| default: |
| goto error_invalid_data; |
| } |
| dai_data->rate = params_rate(params); |
| dai_data->port_config.mi2s.bitwidth = 16; |
| dai_data->bitwidth = 16; |
| if (!mi2s_dai_data->rate_constraint.list) { |
| mi2s_dai_data->rate_constraint.list = &dai_data->rate; |
| mi2s_dai_data->bitwidth_constraint.list = &dai_data->bitwidth; |
| } |
| |
| pr_debug("%s: dai_data->channels = %d, line = %d\n", __func__, |
| dai_data->channels, dai_data->port_config.mi2s.line); |
| return 0; |
| error_invalid_data: |
| pr_err("%s: dai_data->channels = %d, line = %d\n", __func__, |
| dai_data->channels, dai_data->port_config.mi2s.line); |
| return -EINVAL; |
| } |
| |
| static int msm_dai_q6_mi2s_get_lineconfig(u16 sd_lines, u16 *config_ptr, |
| unsigned int *ch_cnt) |
| { |
| u8 num_of_sd_lines; |
| |
| num_of_sd_lines = num_of_bits_set(sd_lines); |
| |
| switch (num_of_sd_lines) { |
| case 0: |
| pr_debug("%s: no line is assigned\n", __func__); |
| break; |
| case 1: |
| switch (sd_lines) { |
| case MSM_MI2S_SD0: |
| *config_ptr = AFE_I2S_SD0; |
| break; |
| case MSM_MI2S_SD1: |
| *config_ptr = AFE_I2S_SD1; |
| break; |
| case MSM_MI2S_SD2: |
| *config_ptr = AFE_I2S_SD2; |
| break; |
| case MSM_MI2S_SD3: |
| *config_ptr = AFE_I2S_SD3; |
| break; |
| default: |
| pr_err("%s: invalid SD line\n", |
| __func__); |
| goto error_invalid_data; |
| } |
| break; |
| case 2: |
| switch (sd_lines) { |
| case MSM_MI2S_SD0 | MSM_MI2S_SD1: |
| *config_ptr = AFE_I2S_QUAD01; |
| break; |
| case MSM_MI2S_SD2 | MSM_MI2S_SD3: |
| *config_ptr = AFE_I2S_QUAD23; |
| break; |
| default: |
| pr_err("%s: invalid SD line\n", |
| __func__); |
| goto error_invalid_data; |
| } |
| break; |
| case 3: |
| switch (sd_lines) { |
| case MSM_MI2S_SD0 | MSM_MI2S_SD1 | MSM_MI2S_SD2: |
| *config_ptr = AFE_I2S_6CHS; |
| break; |
| default: |
| pr_err("%s: invalid SD lines\n", |
| __func__); |
| goto error_invalid_data; |
| } |
| break; |
| case 4: |
| switch (sd_lines) { |
| case MSM_MI2S_SD0 | MSM_MI2S_SD1 | MSM_MI2S_SD2 | MSM_MI2S_SD3: |
| *config_ptr = AFE_I2S_8CHS; |
| break; |
| default: |
| pr_err("%s: invalid SD lines\n", |
| __func__); |
| goto error_invalid_data; |
| } |
| break; |
| default: |
| pr_err("%s: invalid SD lines\n", __func__); |
| goto error_invalid_data; |
| } |
| |
| *ch_cnt = num_of_sd_lines; |
| |
| return 0; |
| |
| error_invalid_data: |
| return -EINVAL; |
| } |
| |
| static int msm_dai_q6_mi2s_platform_data_validation( |
| struct platform_device *pdev, struct snd_soc_dai_driver *dai_driver) |
| { |
| struct msm_dai_q6_mi2s_dai_data *dai_data = dev_get_drvdata(&pdev->dev); |
| struct msm_mi2s_pdata *mi2s_pdata = |
| (struct msm_mi2s_pdata *) pdev->dev.platform_data; |
| u16 sdline_config; |
| unsigned int ch_cnt; |
| int rc = 0; |
| |
| if ((mi2s_pdata->rx_sd_lines & mi2s_pdata->tx_sd_lines) || |
| (!mi2s_pdata->rx_sd_lines && !mi2s_pdata->tx_sd_lines)) { |
| dev_err(&pdev->dev, |
| "error sd line conflict or no line assigned\n"); |
| rc = -EINVAL; |
| goto rtn; |
| } |
| |
| rc = msm_dai_q6_mi2s_get_lineconfig(mi2s_pdata->rx_sd_lines, |
| &sdline_config, &ch_cnt); |
| |
| if (IS_ERR_VALUE(rc)) { |
| dev_err(&pdev->dev, "invalid MI2S RX sd line config\n"); |
| goto rtn; |
| } |
| |
| if (ch_cnt) { |
| dai_data->rx_dai.mi2s_dai_data.port_config.mi2s.line = |
| sdline_config; |
| dai_data->rx_dai.pdata_mi2s_lines = sdline_config; |
| dai_driver->playback.channels_min = 1; |
| dai_driver->playback.channels_max = ch_cnt << 1; |
| } else { |
| dai_driver->playback.channels_min = 0; |
| dai_driver->playback.channels_max = 0; |
| } |
| rc = msm_dai_q6_mi2s_get_lineconfig(mi2s_pdata->tx_sd_lines, |
| &sdline_config, &ch_cnt); |
| |
| if (IS_ERR_VALUE(rc)) { |
| dev_err(&pdev->dev, "invalid MI2S TX sd line config\n"); |
| goto rtn; |
| } |
| |
| if (ch_cnt) { |
| dai_data->tx_dai.mi2s_dai_data.port_config.mi2s.line = |
| sdline_config; |
| dai_data->tx_dai.pdata_mi2s_lines = sdline_config; |
| dai_driver->capture.channels_min = 1; |
| dai_driver->capture.channels_max = ch_cnt << 1; |
| } else { |
| dai_driver->capture.channels_min = 0; |
| dai_driver->capture.channels_max = 0; |
| } |
| |
| dev_info(&pdev->dev, "%s: playback sdline %x capture sdline %x\n", |
| __func__, dai_data->rx_dai.pdata_mi2s_lines, |
| dai_data->tx_dai.pdata_mi2s_lines); |
| dev_info(&pdev->dev, "%s: playback ch_max %d capture ch_mx %d\n", |
| __func__, dai_driver->playback.channels_max, |
| dai_driver->capture.channels_max); |
| rtn: |
| return rc; |
| } |
| |
| static int msm_dai_q6_mi2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct msm_dai_q6_mi2s_dai_data *mi2s_dai_data = |
| dev_get_drvdata(dai->dev); |
| |
| if (test_bit(STATUS_PORT_STARTED, |
| mi2s_dai_data->rx_dai.mi2s_dai_data.status_mask) || |
| test_bit(STATUS_PORT_STARTED, |
| mi2s_dai_data->tx_dai.mi2s_dai_data.status_mask)) { |
| dev_err(dai->dev, "%s: err chg i2s mode while dai running", |
| __func__); |
| return -EPERM; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| mi2s_dai_data->rx_dai.mi2s_dai_data.port_config.mi2s.ws = 1; |
| mi2s_dai_data->tx_dai.mi2s_dai_data.port_config.mi2s.ws = 1; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFM: |
| mi2s_dai_data->rx_dai.mi2s_dai_data.port_config.mi2s.ws = 0; |
| mi2s_dai_data->tx_dai.mi2s_dai_data.port_config.mi2s.ws = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int msm_dai_q6_mi2s_prepare(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_mi2s_dai_data *mi2s_dai_data = |
| dev_get_drvdata(dai->dev); |
| struct msm_dai_q6_dai_data *dai_data = |
| (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? |
| &mi2s_dai_data->rx_dai.mi2s_dai_data : |
| &mi2s_dai_data->tx_dai.mi2s_dai_data); |
| u16 port_id = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? |
| MI2S_RX : MI2S_TX); |
| int rc = 0; |
| |
| if (!test_bit(STATUS_PORT_STARTED, dai_data->status_mask)) { |
| /* PORT START should be set if prepare called in active state */ |
| rc = afe_port_start(port_id, &dai_data->port_config, |
| dai_data->rate); |
| |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to open AFE port %x\n", |
| dai->id); |
| else |
| set_bit(STATUS_PORT_STARTED, |
| dai_data->status_mask); |
| } |
| |
| return rc; |
| } |
| |
| static void msm_dai_q6_mi2s_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_mi2s_dai_data *mi2s_dai_data = |
| dev_get_drvdata(dai->dev); |
| struct msm_dai_q6_dai_data *dai_data = |
| (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? |
| &mi2s_dai_data->rx_dai.mi2s_dai_data : |
| &mi2s_dai_data->tx_dai.mi2s_dai_data); |
| u16 port_id = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? |
| MI2S_RX : MI2S_TX); |
| int rc = 0; |
| |
| if (test_bit(STATUS_PORT_STARTED, dai_data->status_mask)) { |
| rc = afe_close(port_id); |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close AFE port\n"); |
| clear_bit(STATUS_PORT_STARTED, dai_data->status_mask); |
| } |
| |
| if (!test_bit(STATUS_PORT_STARTED, |
| mi2s_dai_data->rx_dai.mi2s_dai_data.status_mask) && |
| !test_bit(STATUS_PORT_STARTED, |
| mi2s_dai_data->rx_dai.mi2s_dai_data.status_mask)) { |
| mi2s_dai_data->rate_constraint.list = NULL; |
| mi2s_dai_data->bitwidth_constraint.list = NULL; |
| } |
| |
| } |
| |
| static int msm_dai_q6_cdc_hw_params(struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai, int stream) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| |
| dai_data->channels = params_channels(params); |
| switch (dai_data->channels) { |
| case 2: |
| dai_data->port_config.mi2s.channel = MSM_AFE_STEREO; |
| break; |
| case 1: |
| dai_data->port_config.mi2s.channel = MSM_AFE_MONO; |
| break; |
| default: |
| return -EINVAL; |
| break; |
| } |
| dai_data->rate = params_rate(params); |
| |
| dev_dbg(dai->dev, " channel %d sample rate %d entered\n", |
| dai_data->channels, dai_data->rate); |
| |
| /* Q6 only supports 16 as now */ |
| dai_data->port_config.mi2s.bitwidth = 16; |
| dai_data->port_config.mi2s.line = 1; |
| return 0; |
| } |
| |
| static int msm_dai_q6_cdc_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| dai_data->port_config.mi2s.ws = 1; /* CPU is master */ |
| break; |
| case SND_SOC_DAIFMT_CBM_CFM: |
| dai_data->port_config.mi2s.ws = 0; /* CPU is slave */ |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int msm_dai_q6_slim_bus_hw_params(struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai, int stream) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| |
| dai_data->channels = params_channels(params); |
| dai_data->rate = params_rate(params); |
| |
| /* Q6 only supports 16 as now */ |
| dai_data->port_config.slim_sch.bit_width = 16; |
| dai_data->port_config.slim_sch.data_format = 0; |
| dai_data->port_config.slim_sch.num_channels = dai_data->channels; |
| dai_data->port_config.slim_sch.reserved = 0; |
| |
| dev_dbg(dai->dev, "%s:slimbus_dev_id[%hu] bit_wd[%hu] format[%hu]\n" |
| "num_channel %hu slave_ch_mapping[0] %hu\n" |
| "slave_port_mapping[1] %hu slave_port_mapping[2] %hu\n" |
| "slave_port_mapping[3] %hu\n sample_rate %d\n", __func__, |
| dai_data->port_config.slim_sch.slimbus_dev_id, |
| dai_data->port_config.slim_sch.bit_width, |
| dai_data->port_config.slim_sch.data_format, |
| dai_data->port_config.slim_sch.num_channels, |
| dai_data->port_config.slim_sch.slave_ch_mapping[0], |
| dai_data->port_config.slim_sch.slave_ch_mapping[1], |
| dai_data->port_config.slim_sch.slave_ch_mapping[2], |
| dai_data->port_config.slim_sch.slave_ch_mapping[3], |
| dai_data->rate); |
| |
| return 0; |
| } |
| |
| static int msm_dai_q6_bt_fm_hw_params(struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai, int stream) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| |
| dai_data->channels = params_channels(params); |
| dai_data->rate = params_rate(params); |
| |
| dev_dbg(dai->dev, "channels %d sample rate %d entered\n", |
| dai_data->channels, dai_data->rate); |
| |
| memset(&dai_data->port_config, 0, sizeof(dai_data->port_config)); |
| |
| return 0; |
| } |
| static int msm_dai_q6_auxpcm_hw_params( |
| struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| struct msm_dai_auxpcm_pdata *auxpcm_pdata = |
| (struct msm_dai_auxpcm_pdata *) dai->dev->platform_data; |
| |
| if (params_channels(params) != 1) { |
| dev_err(dai->dev, "AUX PCM supports only mono stream\n"); |
| return -EINVAL; |
| } |
| dai_data->channels = params_channels(params); |
| |
| dai_data->rate = params_rate(params); |
| switch (dai_data->rate) { |
| case 8000: |
| dai_data->port_config.pcm.mode = auxpcm_pdata->mode_8k.mode; |
| dai_data->port_config.pcm.sync = auxpcm_pdata->mode_8k.sync; |
| dai_data->port_config.pcm.frame = auxpcm_pdata->mode_8k.frame; |
| dai_data->port_config.pcm.quant = auxpcm_pdata->mode_8k.quant; |
| dai_data->port_config.pcm.slot = auxpcm_pdata->mode_8k.slot; |
| dai_data->port_config.pcm.data = auxpcm_pdata->mode_8k.data; |
| break; |
| case 16000: |
| dai_data->port_config.pcm.mode = auxpcm_pdata->mode_16k.mode; |
| dai_data->port_config.pcm.sync = auxpcm_pdata->mode_16k.sync; |
| dai_data->port_config.pcm.frame = auxpcm_pdata->mode_16k.frame; |
| dai_data->port_config.pcm.quant = auxpcm_pdata->mode_16k.quant; |
| dai_data->port_config.pcm.slot = auxpcm_pdata->mode_16k.slot; |
| dai_data->port_config.pcm.data = auxpcm_pdata->mode_16k.data; |
| break; |
| default: |
| dev_err(dai->dev, "AUX PCM supports only 8kHz and 16kHz sampling rate\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int msm_dai_q6_sec_auxpcm_hw_params( |
| struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| struct msm_dai_auxpcm_pdata *auxpcm_pdata = |
| (struct msm_dai_auxpcm_pdata *) dai->dev->platform_data; |
| |
| pr_debug("%s\n", __func__); |
| if (params_channels(params) != 1) { |
| dev_err(dai->dev, "SEC AUX PCM supports only mono stream\n"); |
| return -EINVAL; |
| } |
| dai_data->channels = params_channels(params); |
| |
| dai_data->rate = params_rate(params); |
| switch (dai_data->rate) { |
| case 8000: |
| dai_data->port_config.pcm.mode = auxpcm_pdata->mode_8k.mode; |
| dai_data->port_config.pcm.sync = auxpcm_pdata->mode_8k.sync; |
| dai_data->port_config.pcm.frame = auxpcm_pdata->mode_8k.frame; |
| dai_data->port_config.pcm.quant = auxpcm_pdata->mode_8k.quant; |
| dai_data->port_config.pcm.slot = auxpcm_pdata->mode_8k.slot; |
| dai_data->port_config.pcm.data = auxpcm_pdata->mode_8k.data; |
| break; |
| case 16000: |
| dai_data->port_config.pcm.mode = auxpcm_pdata->mode_16k.mode; |
| dai_data->port_config.pcm.sync = auxpcm_pdata->mode_16k.sync; |
| dai_data->port_config.pcm.frame = auxpcm_pdata->mode_16k.frame; |
| dai_data->port_config.pcm.quant = auxpcm_pdata->mode_16k.quant; |
| dai_data->port_config.pcm.slot = auxpcm_pdata->mode_16k.slot; |
| dai_data->port_config.pcm.data = auxpcm_pdata->mode_16k.data; |
| break; |
| default: |
| dev_err(dai->dev, "AUX PCM supports only 8kHz and 16kHz sampling rate\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int msm_dai_q6_afe_rtproxy_hw_params(struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| |
| dai_data->rate = params_rate(params); |
| dai_data->port_config.rtproxy.num_ch = |
| params_channels(params); |
| |
| pr_debug("channel %d entered,dai_id: %d,rate: %d\n", |
| dai_data->port_config.rtproxy.num_ch, dai->id, dai_data->rate); |
| |
| dai_data->port_config.rtproxy.bitwidth = 16; /* Q6 only supports 16 */ |
| dai_data->port_config.rtproxy.interleaved = 1; |
| dai_data->port_config.rtproxy.frame_sz = params_period_bytes(params); |
| dai_data->port_config.rtproxy.jitter = |
| dai_data->port_config.rtproxy.frame_sz/2; |
| dai_data->port_config.rtproxy.lw_mark = 0; |
| dai_data->port_config.rtproxy.hw_mark = 0; |
| dai_data->port_config.rtproxy.rsvd = 0; |
| |
| return 0; |
| } |
| |
| /* Current implementation assumes hw_param is called once |
| * This may not be the case but what to do when ADM and AFE |
| * port are already opened and parameter changes |
| */ |
| static int msm_dai_q6_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| int rc = 0; |
| |
| switch (dai->id) { |
| case PRIMARY_I2S_TX: |
| case PRIMARY_I2S_RX: |
| case SECONDARY_I2S_RX: |
| rc = msm_dai_q6_cdc_hw_params(params, dai, substream->stream); |
| break; |
| |
| case SLIMBUS_0_RX: |
| case SLIMBUS_1_RX: |
| case SLIMBUS_3_RX: |
| case SLIMBUS_0_TX: |
| case SLIMBUS_1_TX: |
| case SLIMBUS_2_RX: |
| case SLIMBUS_2_TX: |
| case SLIMBUS_3_TX: |
| case SLIMBUS_4_RX: |
| case SLIMBUS_4_TX: |
| rc = msm_dai_q6_slim_bus_hw_params(params, dai, |
| substream->stream); |
| break; |
| case INT_BT_SCO_RX: |
| case INT_BT_SCO_TX: |
| case INT_FM_RX: |
| case INT_FM_TX: |
| rc = msm_dai_q6_bt_fm_hw_params(params, dai, substream->stream); |
| break; |
| case RT_PROXY_DAI_001_TX: |
| case RT_PROXY_DAI_001_RX: |
| case RT_PROXY_DAI_002_TX: |
| case RT_PROXY_DAI_002_RX: |
| rc = msm_dai_q6_afe_rtproxy_hw_params(params, dai); |
| break; |
| case VOICE_PLAYBACK_TX: |
| case VOICE_RECORD_RX: |
| case VOICE_RECORD_TX: |
| rc = 0; |
| break; |
| default: |
| dev_err(dai->dev, "invalid AFE port ID\n"); |
| rc = -EINVAL; |
| break; |
| } |
| |
| return rc; |
| } |
| |
| static void msm_dai_q6_auxpcm_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| int rc = 0; |
| |
| mutex_lock(&aux_pcm_mutex); |
| |
| if (aux_pcm_count == 0) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count is 0. Just" |
| " return\n", __func__, dai->id); |
| mutex_unlock(&aux_pcm_mutex); |
| return; |
| } |
| |
| aux_pcm_count--; |
| |
| if (aux_pcm_count > 0) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count = %d\n", |
| __func__, dai->id, aux_pcm_count); |
| mutex_unlock(&aux_pcm_mutex); |
| return; |
| } else if (aux_pcm_count < 0) { |
| dev_err(dai->dev, "%s(): ERROR: dai->id %d" |
| " aux_pcm_count = %d < 0\n", |
| __func__, dai->id, aux_pcm_count); |
| aux_pcm_count = 0; |
| mutex_unlock(&aux_pcm_mutex); |
| return; |
| } |
| |
| pr_debug("%s: dai->id = %d aux_pcm_count = %d\n", __func__, |
| dai->id, aux_pcm_count); |
| |
| clk_disable_unprepare(pcm_clk); |
| rc = afe_close(PCM_RX); /* can block */ |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close PCM_RX AFE port\n"); |
| |
| rc = afe_close(PCM_TX); |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close AUX PCM TX port\n"); |
| |
| mutex_unlock(&aux_pcm_mutex); |
| } |
| |
| static void msm_dai_q6_sec_auxpcm_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| int rc = 0; |
| |
| pr_debug("%s\n", __func__); |
| mutex_lock(&aux_pcm_mutex); |
| |
| if (aux_pcm_count == 0) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count is 0. Just" |
| " return\n", __func__, dai->id); |
| mutex_unlock(&aux_pcm_mutex); |
| return; |
| } |
| |
| aux_pcm_count--; |
| |
| if (aux_pcm_count > 0) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count = %d\n", |
| __func__, dai->id, aux_pcm_count); |
| mutex_unlock(&aux_pcm_mutex); |
| return; |
| } else if (aux_pcm_count < 0) { |
| dev_err(dai->dev, "%s(): ERROR: dai->id %d" |
| " aux_pcm_count = %d < 0\n", |
| __func__, dai->id, aux_pcm_count); |
| aux_pcm_count = 0; |
| mutex_unlock(&aux_pcm_mutex); |
| return; |
| } |
| |
| pr_debug("%s: dai->id = %d aux_pcm_count = %d\n", __func__, |
| dai->id, aux_pcm_count); |
| |
| clk_disable_unprepare(sec_pcm_clk); |
| rc = afe_close(SECONDARY_PCM_RX); /* can block */ |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close PCM_RX AFE port\n"); |
| |
| rc = afe_close(SECONDARY_PCM_TX); |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close AUX PCM TX port\n"); |
| |
| mutex_unlock(&aux_pcm_mutex); |
| } |
| |
| static void msm_dai_q6_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| int rc = 0; |
| |
| if (test_bit(STATUS_PORT_STARTED, dai_data->status_mask)) { |
| switch (dai->id) { |
| case VOICE_PLAYBACK_TX: |
| case VOICE_RECORD_TX: |
| case VOICE_RECORD_RX: |
| pr_debug("%s, stop pseudo port:%d\n", |
| __func__, dai->id); |
| rc = afe_stop_pseudo_port(dai->id); |
| break; |
| default: |
| rc = afe_close(dai->id); /* can block */ |
| break; |
| } |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close AFE port\n"); |
| pr_debug("%s: dai_data->status_mask = %ld\n", __func__, |
| *dai_data->status_mask); |
| clear_bit(STATUS_PORT_STARTED, dai_data->status_mask); |
| } |
| } |
| |
| static int msm_dai_q6_auxpcm_prepare(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| int rc = 0; |
| struct msm_dai_auxpcm_pdata *auxpcm_pdata = |
| (struct msm_dai_auxpcm_pdata *) dai->dev->platform_data; |
| unsigned long pcm_clk_rate; |
| |
| mutex_lock(&aux_pcm_mutex); |
| |
| if (aux_pcm_count == 2) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count is 2. Just" |
| " return.\n", __func__, dai->id); |
| mutex_unlock(&aux_pcm_mutex); |
| return 0; |
| } else if (aux_pcm_count > 2) { |
| dev_err(dai->dev, "%s(): ERROR: dai->id %d" |
| " aux_pcm_count = %d > 2\n", |
| __func__, dai->id, aux_pcm_count); |
| mutex_unlock(&aux_pcm_mutex); |
| return 0; |
| } |
| |
| aux_pcm_count++; |
| if (aux_pcm_count == 2) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count = %d after " |
| " increment\n", __func__, dai->id, aux_pcm_count); |
| mutex_unlock(&aux_pcm_mutex); |
| return 0; |
| } |
| |
| pr_debug("%s:dai->id:%d aux_pcm_count = %d. opening afe\n", |
| __func__, dai->id, aux_pcm_count); |
| |
| rc = afe_q6_interface_prepare(); |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to open AFE APR\n"); |
| |
| /* |
| * For AUX PCM Interface the below sequence of clk |
| * settings and opening of afe port is a strict requirement. |
| * afe_port_start is called to make sure to make sure the port |
| * is open before deasserting the clock line. This is |
| * required because pcm register is not written before |
| * clock deassert. Hence the hw does not get updated with |
| * new setting if the below clock assert/deasset and afe_port_start |
| * sequence is not followed. |
| */ |
| |
| clk_reset(pcm_clk, CLK_RESET_ASSERT); |
| |
| afe_port_start(PCM_RX, &dai_data->port_config, dai_data->rate); |
| |
| afe_port_start(PCM_TX, &dai_data->port_config, dai_data->rate); |
| if (dai_data->rate == 8000) { |
| pcm_clk_rate = auxpcm_pdata->mode_8k.pcm_clk_rate; |
| } else if (dai_data->rate == 16000) { |
| pcm_clk_rate = auxpcm_pdata->mode_16k.pcm_clk_rate; |
| } else { |
| dev_err(dai->dev, "%s: Invalid AUX PCM rate %d\n", __func__, |
| dai_data->rate); |
| return -EINVAL; |
| } |
| |
| rc = clk_set_rate(pcm_clk, pcm_clk_rate); |
| if (rc < 0) { |
| pr_err("%s: clk_set_rate failed\n", __func__); |
| return rc; |
| } |
| |
| clk_prepare_enable(pcm_clk); |
| clk_reset(pcm_clk, CLK_RESET_DEASSERT); |
| |
| mutex_unlock(&aux_pcm_mutex); |
| |
| return rc; |
| } |
| |
| static int msm_dai_q6_sec_auxpcm_prepare(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| int rc = 0; |
| struct msm_dai_auxpcm_pdata *auxpcm_pdata = |
| (struct msm_dai_auxpcm_pdata *) dai->dev->platform_data; |
| unsigned long pcm_clk_rate; |
| |
| pr_info("%s\n", __func__); |
| |
| mutex_lock(&aux_pcm_mutex); |
| |
| if (aux_pcm_count == 2) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count is 2. Just" |
| " return.\n", __func__, dai->id); |
| mutex_unlock(&aux_pcm_mutex); |
| return 0; |
| } else if (aux_pcm_count > 2) { |
| dev_err(dai->dev, "%s(): ERROR: dai->id %d" |
| " aux_pcm_count = %d > 2\n", |
| __func__, dai->id, aux_pcm_count); |
| mutex_unlock(&aux_pcm_mutex); |
| return 0; |
| } |
| |
| aux_pcm_count++; |
| if (aux_pcm_count == 2) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count = %d after " |
| " increment\n", __func__, dai->id, aux_pcm_count); |
| mutex_unlock(&aux_pcm_mutex); |
| return 0; |
| } |
| |
| pr_debug("%s:dai->id:%d aux_pcm_count = %d. opening afe\n", |
| __func__, dai->id, aux_pcm_count); |
| |
| rc = afe_q6_interface_prepare(); |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to open AFE APR\n"); |
| |
| /* |
| * For AUX PCM Interface the below sequence of clk |
| * settings and opening of afe port is a strict requirement. |
| * afe_port_start is called to make sure to make sure the port |
| * is open before deasserting the clock line. This is |
| * required because pcm register is not written before |
| * clock deassert. Hence the hw does not get updated with |
| * new setting if the below clock assert/deasset and afe_port_start |
| * sequence is not followed. |
| */ |
| |
| clk_reset(sec_pcm_clk, CLK_RESET_ASSERT); |
| |
| afe_port_start(SECONDARY_PCM_RX, &dai_data->port_config, |
| dai_data->rate); |
| |
| afe_port_start(SECONDARY_PCM_TX, &dai_data->port_config, |
| dai_data->rate); |
| if (dai_data->rate == 8000) { |
| pcm_clk_rate = auxpcm_pdata->mode_8k.pcm_clk_rate; |
| } else if (dai_data->rate == 16000) { |
| pcm_clk_rate = auxpcm_pdata->mode_16k.pcm_clk_rate; |
| } else { |
| dev_err(dai->dev, "%s: Invalid AUX PCM rate %d\n", __func__, |
| dai_data->rate); |
| return -EINVAL; |
| } |
| |
| rc = clk_set_rate(sec_pcm_clk, pcm_clk_rate); |
| if (rc < 0) { |
| pr_err("%s: clk_set_rate failed\n", __func__); |
| return rc; |
| } |
| |
| clk_prepare_enable(sec_pcm_clk); |
| clk_reset(sec_pcm_clk, CLK_RESET_DEASSERT); |
| |
| mutex_unlock(&aux_pcm_mutex); |
| |
| return rc; |
| } |
| |
| static int msm_dai_q6_prepare(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| int rc = 0; |
| |
| if (!test_bit(STATUS_PORT_STARTED, dai_data->status_mask)) { |
| switch (dai->id) { |
| case VOICE_PLAYBACK_TX: |
| case VOICE_RECORD_TX: |
| case VOICE_RECORD_RX: |
| rc = afe_start_pseudo_port(dai->id); |
| default: |
| rc = afe_port_start(dai->id, &dai_data->port_config, |
| dai_data->rate); |
| } |
| |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to open AFE port %x\n", |
| dai->id); |
| else |
| set_bit(STATUS_PORT_STARTED, |
| dai_data->status_mask); |
| } |
| |
| return rc; |
| } |
| |
| static int msm_dai_q6_auxpcm_trigger(struct snd_pcm_substream *substream, |
| int cmd, struct snd_soc_dai *dai) |
| { |
| int rc = 0; |
| |
| pr_debug("%s:port:%d cmd:%d aux_pcm_count= %d", |
| __func__, dai->id, cmd, aux_pcm_count); |
| |
| switch (cmd) { |
| |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| /* afe_open will be called from prepare */ |
| return 0; |
| |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| return 0; |
| |
| default: |
| rc = -EINVAL; |
| } |
| |
| return rc; |
| |
| } |
| |
| static int msm_dai_q6_dai_auxpcm_probe(struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data; |
| int rc = 0; |
| |
| struct msm_dai_auxpcm_pdata *auxpcm_pdata = |
| (struct msm_dai_auxpcm_pdata *) dai->dev->platform_data; |
| |
| mutex_lock(&aux_pcm_mutex); |
| |
| if (!auxpcm_plat_data) |
| auxpcm_plat_data = auxpcm_pdata; |
| else if (auxpcm_plat_data != auxpcm_pdata) { |
| |
| dev_err(dai->dev, "AUX PCM RX and TX devices does not have" |
| " same platform data\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * The clk name for AUX PCM operation is passed as platform |
| * data to the cpu driver, since cpu drive is unaware of any |
| * boarc specific configuration. |
| */ |
| if (!pcm_clk) { |
| |
| pcm_clk = clk_get(dai->dev, auxpcm_pdata->clk); |
| |
| if (IS_ERR(pcm_clk)) { |
| pr_err("%s: could not get pcm_clk\n", __func__); |
| pcm_clk = NULL; |
| return -ENODEV; |
| } |
| } |
| |
| mutex_unlock(&aux_pcm_mutex); |
| |
| dai_data = kzalloc(sizeof(struct msm_dai_q6_dai_data), GFP_KERNEL); |
| |
| if (!dai_data) { |
| dev_err(dai->dev, "DAI-%d: fail to allocate dai data\n", |
| dai->id); |
| rc = -ENOMEM; |
| } else |
| dev_set_drvdata(dai->dev, dai_data); |
| |
| pr_debug("%s : probe done for dai->id %d\n", __func__, dai->id); |
| return rc; |
| } |
| |
| static int msm_dai_q6_dai_sec_auxpcm_probe(struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data; |
| int rc = 0; |
| struct msm_dai_auxpcm_pdata *auxpcm_pdata = |
| (struct msm_dai_auxpcm_pdata *) dai->dev->platform_data; |
| |
| pr_info("%s\n", __func__); |
| |
| mutex_lock(&aux_pcm_mutex); |
| |
| if (!sec_auxpcm_plat_data) |
| sec_auxpcm_plat_data = auxpcm_pdata; |
| else if (sec_auxpcm_plat_data != auxpcm_pdata) { |
| dev_err(dai->dev, "AUX PCM RX and TX devices does not have" |
| " same platform data sec_auxpcm_plat_data\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * The clk name for AUX PCM operation is passed as platform |
| * data to the cpu driver, since cpu drive is unaware of any |
| * boarc specific configuration. |
| */ |
| if (!sec_pcm_clk) { |
| |
| sec_pcm_clk = clk_get(dai->dev, auxpcm_pdata->clk); |
| if (IS_ERR(sec_pcm_clk)) { |
| pr_err("%s: could not get sec_pcm_clk\n", __func__); |
| sec_pcm_clk = NULL; |
| return -ENODEV; |
| } |
| } |
| |
| mutex_unlock(&aux_pcm_mutex); |
| |
| dai_data = kzalloc(sizeof(struct msm_dai_q6_dai_data), GFP_KERNEL); |
| |
| if (!dai_data) { |
| dev_err(dai->dev, "DAI-%d: fail to allocate dai data\n", |
| dai->id); |
| rc = -ENOMEM; |
| } else |
| dev_set_drvdata(dai->dev, dai_data); |
| |
| pr_debug("%s : probe done for dai->id %d\n", __func__, dai->id); |
| return rc; |
| } |
| |
| static int msm_dai_q6_dai_auxpcm_remove(struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data; |
| int rc; |
| |
| dai_data = dev_get_drvdata(dai->dev); |
| |
| mutex_lock(&aux_pcm_mutex); |
| |
| if (aux_pcm_count == 0) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count is 0. clean" |
| " up and return\n", __func__, dai->id); |
| goto done; |
| } |
| |
| aux_pcm_count--; |
| |
| if (aux_pcm_count > 0) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count = %d\n", |
| __func__, dai->id, aux_pcm_count); |
| goto done; |
| } else if (aux_pcm_count < 0) { |
| dev_err(dai->dev, "%s(): ERROR: dai->id %d" |
| " aux_pcm_count = %d < 0\n", |
| __func__, dai->id, aux_pcm_count); |
| goto done; |
| } |
| |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count = %d." |
| "closing afe\n", |
| __func__, dai->id, aux_pcm_count); |
| |
| rc = afe_close(PCM_RX); /* can block */ |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close AUX PCM RX AFE port\n"); |
| |
| rc = afe_close(PCM_TX); |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close AUX PCM TX AFE port\n"); |
| |
| done: |
| kfree(dai_data); |
| snd_soc_unregister_dai(dai->dev); |
| |
| mutex_unlock(&aux_pcm_mutex); |
| |
| return 0; |
| } |
| |
| static int msm_dai_q6_dai_sec_auxpcm_remove(struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data; |
| int rc; |
| |
| pr_debug("%s\n", __func__); |
| dai_data = dev_get_drvdata(dai->dev); |
| |
| mutex_lock(&aux_pcm_mutex); |
| |
| if (aux_pcm_count == 0) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count is 0. clean" |
| " up and return\n", __func__, dai->id); |
| goto done; |
| } |
| |
| aux_pcm_count--; |
| |
| if (aux_pcm_count > 0) { |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count = %d\n", |
| __func__, dai->id, aux_pcm_count); |
| goto done; |
| } else if (aux_pcm_count < 0) { |
| dev_err(dai->dev, "%s(): ERROR: dai->id %d" |
| " aux_pcm_count = %d < 0\n", |
| __func__, dai->id, aux_pcm_count); |
| goto done; |
| } |
| |
| dev_dbg(dai->dev, "%s(): dai->id %d aux_pcm_count = %d." |
| "closing afe\n", |
| __func__, dai->id, aux_pcm_count); |
| |
| rc = afe_close(SECONDARY_PCM_RX); /* can block */ |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close AUX PCM RX AFE port\n"); |
| |
| rc = afe_close(SECONDARY_PCM_TX); |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close AUX PCM TX AFE port\n"); |
| |
| done: |
| kfree(dai_data); |
| snd_soc_unregister_dai(dai->dev); |
| |
| mutex_unlock(&aux_pcm_mutex); |
| |
| return 0; |
| } |
| |
| static int msm_dai_q6_dai_mi2s_probe(struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_mi2s_dai_data *mi2s_dai_data = |
| dev_get_drvdata(dai->dev); |
| struct snd_kcontrol *kcontrol = NULL; |
| int rc = 0; |
| |
| if (mi2s_dai_data->rx_dai.mi2s_dai_data.port_config.mi2s.line) { |
| kcontrol = snd_ctl_new1(&mi2s_config_controls[0], |
| &mi2s_dai_data->rx_dai.mi2s_dai_data); |
| rc = snd_ctl_add(dai->card->snd_card, kcontrol); |
| |
| if (IS_ERR_VALUE(rc)) { |
| dev_err(dai->dev, "%s: err add RX fmt ctl\n", __func__); |
| goto rtn; |
| } |
| } |
| |
| if (mi2s_dai_data->tx_dai.mi2s_dai_data.port_config.mi2s.line) { |
| rc = snd_ctl_add(dai->card->snd_card, |
| snd_ctl_new1(&mi2s_config_controls[2], |
| &mi2s_dai_data->tx_dai.mi2s_dai_data)); |
| |
| if (IS_ERR_VALUE(rc)) { |
| if (kcontrol) |
| snd_ctl_remove(dai->card->snd_card, kcontrol); |
| dev_err(dai->dev, "%s: err add TX fmt ctl\n", __func__); |
| } |
| } |
| |
| rtn: |
| return rc; |
| } |
| |
| static int msm_dai_q6_dai_mi2s_remove(struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_mi2s_dai_data *mi2s_dai_data = |
| dev_get_drvdata(dai->dev); |
| int rc; |
| |
| /* If AFE port is still up, close it */ |
| if (test_bit(STATUS_PORT_STARTED, |
| mi2s_dai_data->rx_dai.mi2s_dai_data.status_mask)) { |
| rc = afe_close(MI2S_RX); /* can block */ |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close MI2S_RX port\n"); |
| clear_bit(STATUS_PORT_STARTED, |
| mi2s_dai_data->rx_dai.mi2s_dai_data.status_mask); |
| } |
| if (test_bit(STATUS_PORT_STARTED, |
| mi2s_dai_data->tx_dai.mi2s_dai_data.status_mask)) { |
| rc = afe_close(MI2S_TX); /* can block */ |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close MI2S_TX port\n"); |
| clear_bit(STATUS_PORT_STARTED, |
| mi2s_dai_data->tx_dai.mi2s_dai_data.status_mask); |
| } |
| kfree(mi2s_dai_data); |
| snd_soc_unregister_dai(dai->dev); |
| |
| return 0; |
| } |
| |
| static int msm_dai_q6_dai_probe(struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data; |
| int rc = 0; |
| const struct snd_kcontrol_new *kcontrol; |
| |
| dai_data = kzalloc(sizeof(struct msm_dai_q6_dai_data), |
| GFP_KERNEL); |
| |
| if (!dai_data) { |
| dev_err(dai->dev, "DAI-%d: fail to allocate dai data\n", |
| dai->id); |
| rc = -ENOMEM; |
| } else |
| dev_set_drvdata(dai->dev, dai_data); |
| if (dai->id == SECONDARY_I2S_RX) { |
| kcontrol = &mi2s_config_controls[1]; |
| rc = snd_ctl_add(dai->card->snd_card, |
| snd_ctl_new1(kcontrol, dai_data)); |
| } |
| |
| return rc; |
| } |
| |
| static int msm_dai_q6_dai_remove(struct snd_soc_dai *dai) |
| { |
| struct msm_dai_q6_dai_data *dai_data; |
| int rc; |
| |
| dai_data = dev_get_drvdata(dai->dev); |
| |
| /* If AFE port is still up, close it */ |
| if (test_bit(STATUS_PORT_STARTED, dai_data->status_mask)) { |
| switch (dai->id) { |
| case VOICE_PLAYBACK_TX: |
| case VOICE_RECORD_TX: |
| case VOICE_RECORD_RX: |
| pr_debug("%s, stop pseudo port:%d\n", |
| __func__, dai->id); |
| rc = afe_stop_pseudo_port(dai->id); |
| break; |
| default: |
| rc = afe_close(dai->id); /* can block */ |
| } |
| if (IS_ERR_VALUE(rc)) |
| dev_err(dai->dev, "fail to close AFE port\n"); |
| clear_bit(STATUS_PORT_STARTED, dai_data->status_mask); |
| } |
| kfree(dai_data); |
| snd_soc_unregister_dai(dai->dev); |
| |
| return 0; |
| } |
| |
| static int msm_dai_q6_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| int rc = 0; |
| |
| dev_dbg(dai->dev, "enter %s, id = %d fmt[%d]\n", __func__, |
| dai->id, fmt); |
| switch (dai->id) { |
| case PRIMARY_I2S_TX: |
| case PRIMARY_I2S_RX: |
| case SECONDARY_I2S_RX: |
| rc = msm_dai_q6_cdc_set_fmt(dai, fmt); |
| break; |
| default: |
| dev_err(dai->dev, "invalid cpu_dai set_fmt\n"); |
| rc = -EINVAL; |
| break; |
| } |
| |
| return rc; |
| } |
| |
| static int msm_dai_q6_set_channel_map(struct snd_soc_dai *dai, |
| unsigned int tx_num, unsigned int *tx_slot, |
| unsigned int rx_num, unsigned int *rx_slot) |
| { |
| int rc = 0; |
| struct msm_dai_q6_dai_data *dai_data = dev_get_drvdata(dai->dev); |
| unsigned int i = 0; |
| |
| dev_dbg(dai->dev, "%s: dai_id = %d\n", __func__, dai->id); |
| switch (dai->id) { |
| case SLIMBUS_0_RX: |
| case SLIMBUS_1_RX: |
| case SLIMBUS_2_RX: |
| case SLIMBUS_3_RX: |
| case SLIMBUS_4_RX: |
| /* channel number to be between 128 and 255. For RX port |
| * use channel numbers from 138 to 144, for TX port |
| * use channel numbers from 128 to 137 |
| * For ports between MDM-APQ use channel numbers from 145 |
| */ |
| if (!rx_slot) |
| return -EINVAL; |
| for (i = 0; i < rx_num; i++) { |
| dai_data->port_config.slim_sch.slave_ch_mapping[i] = |
| rx_slot[i]; |
| pr_debug("%s: find number of channels[%d] ch[%d]\n", |
| __func__, i, |
| rx_slot[i]); |
| } |
| dai_data->port_config.slim_sch.num_channels = rx_num; |
| pr_debug("%s:SLIMBUS_%d_RX cnt[%d] ch[%d %d]\n", __func__, |
| (dai->id - SLIMBUS_0_RX) / 2, |
| rx_num, dai_data->port_config.slim_sch.slave_ch_mapping[0], |
| dai_data->port_config.slim_sch.slave_ch_mapping[1]); |
| |
| break; |
| case SLIMBUS_0_TX: |
| case SLIMBUS_1_TX: |
| case SLIMBUS_2_TX: |
| case SLIMBUS_3_TX: |
| case SLIMBUS_4_TX: |
| /* channel number to be between 128 and 255. For RX port |
| * use channel numbers from 138 to 144, for TX port |
| * use channel numbers from 128 to 137 |
| * For ports between MDM-APQ use channel numbers from 145 |
| */ |
| if (!tx_slot) |
| return -EINVAL; |
| for (i = 0; i < tx_num; i++) { |
| dai_data->port_config.slim_sch.slave_ch_mapping[i] = |
| tx_slot[i]; |
| pr_debug("%s: find number of channels[%d] ch[%d]\n", |
| __func__, i, tx_slot[i]); |
| } |
| dai_data->port_config.slim_sch.num_channels = tx_num; |
| pr_debug("%s:SLIMBUS_%d_TX cnt[%d] ch[%d %d]\n", __func__, |
| (dai->id - SLIMBUS_0_TX) / 2, |
| tx_num, dai_data->port_config.slim_sch.slave_ch_mapping[0], |
| dai_data->port_config.slim_sch.slave_ch_mapping[1]); |
| break; |
| default: |
| dev_err(dai->dev, "invalid cpu_dai set_fmt\n"); |
| rc = -EINVAL; |
| break; |
| } |
| return rc; |
| } |
| |
| static struct snd_soc_dai_ops msm_dai_q6_mi2s_ops = { |
| .startup = msm_dai_q6_mi2s_startup, |
| .prepare = msm_dai_q6_mi2s_prepare, |
| .hw_params = msm_dai_q6_mi2s_hw_params, |
| .shutdown = msm_dai_q6_mi2s_shutdown, |
| .set_fmt = msm_dai_q6_mi2s_set_fmt, |
| }; |
| |
| static struct snd_soc_dai_ops msm_dai_q6_ops = { |
| .prepare = msm_dai_q6_prepare, |
| .hw_params = msm_dai_q6_hw_params, |
| .shutdown = msm_dai_q6_shutdown, |
| .set_fmt = msm_dai_q6_set_fmt, |
| .set_channel_map = msm_dai_q6_set_channel_map, |
| }; |
| |
| static struct snd_soc_dai_ops msm_dai_q6_auxpcm_ops = { |
| .prepare = msm_dai_q6_auxpcm_prepare, |
| .trigger = msm_dai_q6_auxpcm_trigger, |
| .hw_params = msm_dai_q6_auxpcm_hw_params, |
| .shutdown = msm_dai_q6_auxpcm_shutdown, |
| }; |
| |
| static struct snd_soc_dai_ops msm_dai_q6_sec_auxpcm_ops = { |
| .prepare = msm_dai_q6_sec_auxpcm_prepare, |
| .trigger = msm_dai_q6_auxpcm_trigger, |
| .hw_params = msm_dai_q6_sec_auxpcm_hw_params, |
| .shutdown = msm_dai_q6_sec_auxpcm_shutdown, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_i2s_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 4, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_i2s_tx_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_afe_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_afe_tx_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 4, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_voice_playback_tx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_max = 48000, |
| .rate_min = 8000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_slimbus_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_slimbus_tx_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_incall_record_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_bt_sco_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 1, |
| .rate_max = 16000, |
| .rate_min = 8000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_bt_sco_tx_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 1, |
| .rate_max = 16000, |
| .rate_min = 8000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_fm_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 2, |
| .channels_max = 2, |
| .rate_max = 48000, |
| .rate_min = 8000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_fm_tx_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 2, |
| .channels_max = 2, |
| .rate_max = 48000, |
| .rate_min = 8000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_aux_pcm_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 1, |
| .rate_max = 16000, |
| .rate_min = 8000, |
| }, |
| .ops = &msm_dai_q6_auxpcm_ops, |
| .probe = msm_dai_q6_dai_auxpcm_probe, |
| .remove = msm_dai_q6_dai_auxpcm_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_aux_pcm_tx_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 1, |
| .rate_max = 16000, |
| .rate_min = 8000, |
| }, |
| .ops = &msm_dai_q6_auxpcm_ops, |
| .probe = msm_dai_q6_dai_auxpcm_probe, |
| .remove = msm_dai_q6_dai_auxpcm_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_sec_aux_pcm_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 1, |
| .rate_max = 16000, |
| .rate_min = 8000, |
| }, |
| .ops = &msm_dai_q6_sec_auxpcm_ops, |
| .probe = msm_dai_q6_dai_sec_auxpcm_probe, |
| .remove = msm_dai_q6_dai_sec_auxpcm_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_sec_aux_pcm_tx_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 1, |
| .rate_max = 16000, |
| .rate_min = 8000, |
| }, |
| .ops = &msm_dai_q6_sec_auxpcm_ops, |
| .probe = msm_dai_q6_dai_sec_auxpcm_probe, |
| .remove = msm_dai_q6_dai_sec_auxpcm_remove, |
| }; |
| |
| /* Channel min and max are initialized base on platform data */ |
| static struct snd_soc_dai_driver msm_dai_q6_mi2s_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .capture = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .ops = &msm_dai_q6_mi2s_ops, |
| .probe = msm_dai_q6_dai_mi2s_probe, |
| .remove = msm_dai_q6_dai_mi2s_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_slimbus_1_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 1, |
| .rate_min = 8000, |
| .rate_max = 16000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_slimbus_1_tx_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 1, |
| .rate_min = 8000, |
| .rate_max = 16000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_slimbus_2_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | |
| SNDRV_PCM_RATE_192000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_min = 8000, |
| .rate_max = 192000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_slimbus_2_tx_dai = { |
| .capture = { |
| .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | |
| SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | |
| SNDRV_PCM_RATE_192000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 4, |
| .rate_min = 8000, |
| .rate_max = 192000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| static struct snd_soc_dai_driver msm_dai_q6_slimbus_3_rx_dai = { |
| .playback = { |
| .rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 | |
| SNDRV_PCM_RATE_48000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| .channels_min = 1, |
| .channels_max = 2, |
| .rate_min = 8000, |
| .rate_max = 48000, |
| }, |
| .ops = &msm_dai_q6_ops, |
| .probe = msm_dai_q6_dai_probe, |
| .remove = msm_dai_q6_dai_remove, |
| }; |
| |
| /* To do: change to register DAIs as batch */ |
| static __devinit int msm_dai_q6_dev_probe(struct platform_device *pdev) |
| { |
| int rc = 0; |
| |
| dev_dbg(&pdev->dev, "dev name %s\n", dev_name(&pdev->dev)); |
| |
| switch (pdev->id) { |
| case PRIMARY_I2S_RX: |
| case SECONDARY_I2S_RX: |
| rc = snd_soc_register_dai(&pdev->dev, &msm_dai_q6_i2s_rx_dai); |
| break; |
| case PRIMARY_I2S_TX: |
| rc = snd_soc_register_dai(&pdev->dev, &msm_dai_q6_i2s_tx_dai); |
| break; |
| case PCM_RX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_aux_pcm_rx_dai); |
| break; |
| case PCM_TX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_aux_pcm_tx_dai); |
| break; |
| |
| case SECONDARY_PCM_RX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_sec_aux_pcm_rx_dai); |
| break; |
| case SECONDARY_PCM_TX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_sec_aux_pcm_tx_dai); |
| break; |
| case SLIMBUS_0_RX: |
| case SLIMBUS_4_RX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_slimbus_rx_dai); |
| break; |
| case SLIMBUS_0_TX: |
| case SLIMBUS_4_TX: |
| case SLIMBUS_3_TX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_slimbus_tx_dai); |
| break; |
| case SLIMBUS_1_RX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_slimbus_1_rx_dai); |
| break; |
| case SLIMBUS_1_TX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_slimbus_1_tx_dai); |
| break; |
| case SLIMBUS_2_RX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_slimbus_2_rx_dai); |
| break; |
| case SLIMBUS_2_TX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_slimbus_2_tx_dai); |
| break; |
| case SLIMBUS_3_RX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_slimbus_3_rx_dai); |
| break; |
| case INT_BT_SCO_RX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_bt_sco_rx_dai); |
| break; |
| case INT_BT_SCO_TX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_bt_sco_tx_dai); |
| break; |
| case INT_FM_RX: |
| rc = snd_soc_register_dai(&pdev->dev, &msm_dai_q6_fm_rx_dai); |
| break; |
| case INT_FM_TX: |
| rc = snd_soc_register_dai(&pdev->dev, &msm_dai_q6_fm_tx_dai); |
| break; |
| case RT_PROXY_DAI_001_RX: |
| case RT_PROXY_DAI_002_RX: |
| rc = snd_soc_register_dai(&pdev->dev, &msm_dai_q6_afe_rx_dai); |
| break; |
| case RT_PROXY_DAI_001_TX: |
| case RT_PROXY_DAI_002_TX: |
| rc = snd_soc_register_dai(&pdev->dev, &msm_dai_q6_afe_tx_dai); |
| break; |
| case VOICE_PLAYBACK_TX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_voice_playback_tx_dai); |
| break; |
| case VOICE_RECORD_RX: |
| case VOICE_RECORD_TX: |
| rc = snd_soc_register_dai(&pdev->dev, |
| &msm_dai_q6_incall_record_dai); |
| break; |
| default: |
| rc = -ENODEV; |
| break; |
| } |
| return rc; |
| } |
| |
| static __devexit int msm_dai_q6_dev_remove(struct platform_device *pdev) |
| { |
| snd_soc_unregister_dai(&pdev->dev); |
| return 0; |
| } |
| |
| static __devinit int msm_dai_q6_mi2s_dev_probe(struct platform_device *pdev) |
| { |
| struct msm_dai_q6_mi2s_dai_data *dai_data; |
| int rc = 0; |
| |
| dev_dbg(&pdev->dev, "%s: pdev %p dev %p\n", __func__, pdev, &pdev->dev); |
| |
| dai_data = kzalloc(sizeof(struct msm_dai_q6_mi2s_dai_data), |
| GFP_KERNEL); |
| |
| if (!dai_data) { |
| dev_err(&pdev->dev, "fail to allocate dai data\n"); |
| rc = -ENOMEM; |
| goto rtn; |
| } else |
| dev_set_drvdata(&pdev->dev, dai_data); |
| |
| rc = msm_dai_q6_mi2s_platform_data_validation(pdev, |
| &msm_dai_q6_mi2s_dai); |
| if (IS_ERR_VALUE(rc)) |
| goto err_pdata; |
| |
| dai_data->rate_constraint.count = 1; |
| dai_data->bitwidth_constraint.count = 1; |
| rc = snd_soc_register_dai(&pdev->dev, &msm_dai_q6_mi2s_dai); |
| |
| if (IS_ERR_VALUE(rc)) |
| goto err_pdata; |
| |
| return 0; |
| |
| err_pdata: |
| |
| dev_err(&pdev->dev, "fail to msm_dai_q6_mi2s_dev_probe\n"); |
| kfree(dai_data); |
| rtn: |
| return rc; |
| } |
| |
| static __devexit int msm_dai_q6_mi2s_dev_remove(struct platform_device *pdev) |
| { |
| snd_soc_unregister_dai(&pdev->dev); |
| return 0; |
| } |
| |
| static struct platform_driver msm_dai_q6_driver = { |
| .probe = msm_dai_q6_dev_probe, |
| .remove = msm_dai_q6_dev_remove, |
| .driver = { |
| .name = "msm-dai-q6", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static struct platform_driver msm_dai_q6_mi2s_driver = { |
| .probe = msm_dai_q6_mi2s_dev_probe, |
| .remove = msm_dai_q6_mi2s_dev_remove, |
| .driver = { |
| .name = "msm-dai-q6-mi2s", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init msm_dai_q6_init(void) |
| { |
| int rc1, rc2; |
| |
| rc1 = platform_driver_register(&msm_dai_q6_mi2s_driver); |
| |
| if (IS_ERR_VALUE(rc1)) |
| pr_err("%s: fail to register mi2s dai driver\n", __func__); |
| |
| rc2 = platform_driver_register(&msm_dai_q6_driver); |
| |
| if (IS_ERR_VALUE(rc2)) |
| pr_err("%s: fail to register mi2s dai driver\n", __func__); |
| |
| return (IS_ERR_VALUE(rc1) && IS_ERR_VALUE(rc2)) ? -1 : 0; |
| } |
| module_init(msm_dai_q6_init); |
| |
| static void __exit msm_dai_q6_exit(void) |
| { |
| platform_driver_unregister(&msm_dai_q6_driver); |
| } |
| module_exit(msm_dai_q6_exit); |
| |
| /* Module information */ |
| MODULE_DESCRIPTION("MSM DSP DAI driver"); |
| MODULE_LICENSE("GPL v2"); |