| /* Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/mfd/pm8xxx/pm8921.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/mfd/pm8xxx/pm8921.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/pcm.h> |
| #include <sound/jack.h> |
| #include <asm/mach-types.h> |
| #include <mach/socinfo.h> |
| #include <qdsp6v2/msm-pcm-routing-v2.h> |
| #include "../codecs/wcd9310.h" |
| |
| /* 8974 machine driver */ |
| |
| #define PM8921_GPIO_BASE NR_GPIO_IRQS |
| #define PM8921_GPIO_PM_TO_SYS(pm_gpio) (pm_gpio - 1 + PM8921_GPIO_BASE) |
| |
| #define MSM8974_SPK_ON 1 |
| #define MSM8974_SPK_OFF 0 |
| |
| #define MSM_SLIM_0_RX_MAX_CHANNELS 2 |
| #define MSM_SLIM_0_TX_MAX_CHANNELS 4 |
| |
| #define BTSCO_RATE_8KHZ 8000 |
| #define BTSCO_RATE_16KHZ 16000 |
| |
| #define BOTTOM_SPK_AMP_POS 0x1 |
| #define BOTTOM_SPK_AMP_NEG 0x2 |
| #define TOP_SPK_AMP_POS 0x4 |
| #define TOP_SPK_AMP_NEG 0x8 |
| |
| #define GPIO_AUX_PCM_DOUT 43 |
| #define GPIO_AUX_PCM_DIN 44 |
| #define GPIO_AUX_PCM_SYNC 45 |
| #define GPIO_AUX_PCM_CLK 46 |
| |
| #define TABLA_EXT_CLK_RATE 12288000 |
| |
| #define TABLA_MBHC_DEF_BUTTONS 8 |
| #define TABLA_MBHC_DEF_RLOADS 5 |
| |
| /* Shared channel numbers for Slimbus ports that connect APQ to MDM. */ |
| enum { |
| SLIM_1_RX_1 = 145, /* BT-SCO and USB TX */ |
| SLIM_1_TX_1 = 146, /* BT-SCO and USB RX */ |
| SLIM_2_RX_1 = 147, /* HDMI RX */ |
| SLIM_3_RX_1 = 148, /* In-call recording RX */ |
| SLIM_3_RX_2 = 149, /* In-call recording RX */ |
| SLIM_4_TX_1 = 150, /* In-call musid delivery TX */ |
| }; |
| |
| static u32 top_spk_pamp_gpio = PM8921_GPIO_PM_TO_SYS(18); |
| static u32 bottom_spk_pamp_gpio = PM8921_GPIO_PM_TO_SYS(19); |
| static int msm_spk_control; |
| static int msm_ext_bottom_spk_pamp; |
| static int msm_ext_top_spk_pamp; |
| static int msm_slim_0_rx_ch = 1; |
| static int msm_slim_0_tx_ch = 1; |
| |
| static int msm_btsco_rate = BTSCO_RATE_8KHZ; |
| static int msm_headset_gpios_configured; |
| |
| static struct snd_soc_jack hs_jack; |
| static struct snd_soc_jack button_jack; |
| |
| static int msm_enable_codec_ext_clk(struct snd_soc_codec *codec, int enable, |
| bool dapm); |
| |
| static struct tabla_mbhc_config mbhc_cfg = { |
| .headset_jack = &hs_jack, |
| .button_jack = &button_jack, |
| .read_fw_bin = false, |
| .calibration = NULL, |
| .micbias = TABLA_MICBIAS2, |
| .mclk_cb_fn = msm_enable_codec_ext_clk, |
| .mclk_rate = TABLA_EXT_CLK_RATE, |
| .gpio = 0, /* MBHC GPIO is not configured */ |
| .gpio_irq = 0, |
| .gpio_level_insert = 1, |
| }; |
| |
| static void msm_enable_ext_spk_amp_gpio(u32 spk_amp_gpio) |
| { |
| int ret = 0; |
| |
| struct pm_gpio param = { |
| .direction = PM_GPIO_DIR_OUT, |
| .output_buffer = PM_GPIO_OUT_BUF_CMOS, |
| .output_value = 1, |
| .pull = PM_GPIO_PULL_NO, |
| .vin_sel = PM_GPIO_VIN_S4, |
| .out_strength = PM_GPIO_STRENGTH_MED, |
| . |
| function = PM_GPIO_FUNC_NORMAL, |
| }; |
| |
| if (spk_amp_gpio == bottom_spk_pamp_gpio) { |
| |
| ret = gpio_request(bottom_spk_pamp_gpio, "BOTTOM_SPK_AMP"); |
| if (ret) { |
| pr_err("%s: Error requesting BOTTOM SPK AMP GPIO %u\n", |
| __func__, bottom_spk_pamp_gpio); |
| return; |
| } |
| ret = pm8xxx_gpio_config(bottom_spk_pamp_gpio, ¶m); |
| if (ret) |
| pr_err("%s: Failed to configure Bottom Spk Ampl gpio %u\n", |
| __func__, bottom_spk_pamp_gpio); |
| else { |
| pr_debug("%s: enable Bottom spkr amp gpio\n", __func__); |
| gpio_direction_output(bottom_spk_pamp_gpio, 1); |
| } |
| |
| } else if (spk_amp_gpio == top_spk_pamp_gpio) { |
| |
| ret = gpio_request(top_spk_pamp_gpio, "TOP_SPK_AMP"); |
| if (ret) { |
| pr_err("%s: Error requesting GPIO %d\n", __func__, |
| top_spk_pamp_gpio); |
| return; |
| } |
| ret = pm8xxx_gpio_config(top_spk_pamp_gpio, ¶m); |
| if (ret) |
| pr_err("%s: Failed to configure Top Spk Ampl gpio %u\n", |
| __func__, top_spk_pamp_gpio); |
| else { |
| pr_debug("%s: enable Top spkr amp gpio\n", __func__); |
| gpio_direction_output(top_spk_pamp_gpio, 1); |
| } |
| } else { |
| pr_err("%s: ERROR : Invalid External Speaker Ampl GPIO. gpio = %u\n", |
| __func__, spk_amp_gpio); |
| return; |
| } |
| } |
| |
| static void msm_ext_spk_power_amp_on(u32 spk) |
| { |
| if (spk & (BOTTOM_SPK_AMP_POS | BOTTOM_SPK_AMP_NEG)) { |
| |
| if ((msm_ext_bottom_spk_pamp & BOTTOM_SPK_AMP_POS) && |
| (msm_ext_bottom_spk_pamp & BOTTOM_SPK_AMP_NEG)) { |
| |
| pr_debug("%s() External Bottom Speaker Ampl already turned on. spk = 0x%08x\n", |
| __func__, spk); |
| return; |
| } |
| |
| msm_ext_bottom_spk_pamp |= spk; |
| |
| if ((msm_ext_bottom_spk_pamp & BOTTOM_SPK_AMP_POS) && |
| (msm_ext_bottom_spk_pamp & BOTTOM_SPK_AMP_NEG)) { |
| |
| msm_enable_ext_spk_amp_gpio(bottom_spk_pamp_gpio); |
| pr_debug("%s: slepping 4 ms after turning on external Bottom Speaker Ampl\n", |
| __func__); |
| usleep_range(4000, 4000); |
| } |
| |
| } else if (spk & (TOP_SPK_AMP_POS | TOP_SPK_AMP_NEG)) { |
| |
| if ((msm_ext_top_spk_pamp & TOP_SPK_AMP_POS) && |
| (msm_ext_top_spk_pamp & TOP_SPK_AMP_NEG)) { |
| |
| pr_debug("%s() External Top Speaker Ampl already turned on. spk = 0x%08x\n", |
| __func__, spk); |
| return; |
| } |
| |
| msm_ext_top_spk_pamp |= spk; |
| |
| if ((msm_ext_top_spk_pamp & TOP_SPK_AMP_POS) && |
| (msm_ext_top_spk_pamp & TOP_SPK_AMP_NEG)) { |
| |
| msm_enable_ext_spk_amp_gpio(top_spk_pamp_gpio); |
| pr_debug("%s: sleeping 4 ms after turning on external Top Speaker Ampl\n", |
| __func__); |
| usleep_range(4000, 4000); |
| } |
| } else { |
| |
| pr_err("%s: ERROR : Invalid External Speaker Ampl. spk = 0x%08x\n", |
| __func__, spk); |
| return; |
| } |
| } |
| |
| static void msm_ext_spk_power_amp_off(u32 spk) |
| { |
| if (spk & (BOTTOM_SPK_AMP_POS | BOTTOM_SPK_AMP_NEG)) { |
| |
| if (!msm_ext_bottom_spk_pamp) |
| return; |
| |
| gpio_direction_output(bottom_spk_pamp_gpio, 0); |
| gpio_free(bottom_spk_pamp_gpio); |
| msm_ext_bottom_spk_pamp = 0; |
| |
| pr_debug("%s: sleeping 4 ms after turning off external Bottom Speaker Ampl\n", |
| __func__); |
| |
| usleep_range(4000, 4000); |
| |
| } else if (spk & (TOP_SPK_AMP_POS | TOP_SPK_AMP_NEG)) { |
| |
| if (!msm_ext_top_spk_pamp) |
| return; |
| |
| gpio_direction_output(top_spk_pamp_gpio, 0); |
| gpio_free(top_spk_pamp_gpio); |
| msm_ext_top_spk_pamp = 0; |
| |
| pr_debug("%s: sleeping 4 ms after turning off external Top Spkaker Ampl\n", |
| __func__); |
| |
| usleep_range(4000, 4000); |
| } else { |
| |
| pr_err("%s: ERROR : Invalid Ext Spk Ampl. spk = 0x%08x\n", |
| __func__, spk); |
| return; |
| } |
| } |
| |
| static void msm_ext_control(struct snd_soc_codec *codec) |
| { |
| struct snd_soc_dapm_context *dapm = &codec->dapm; |
| |
| pr_debug("%s: msm_spk_control = %d", __func__, msm_spk_control); |
| if (msm_spk_control == MSM8974_SPK_ON) { |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Bottom Pos"); |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Bottom Neg"); |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Top Pos"); |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Top Neg"); |
| } else { |
| snd_soc_dapm_disable_pin(dapm, "Ext Spk Bottom Pos"); |
| snd_soc_dapm_disable_pin(dapm, "Ext Spk Bottom Neg"); |
| snd_soc_dapm_disable_pin(dapm, "Ext Spk Top Pos"); |
| snd_soc_dapm_disable_pin(dapm, "Ext Spk Top Neg"); |
| } |
| |
| snd_soc_dapm_sync(dapm); |
| } |
| |
| static int msm_get_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| pr_debug("%s: msm_spk_control = %d", __func__, msm_spk_control); |
| ucontrol->value.integer.value[0] = msm_spk_control; |
| return 0; |
| } |
| static int msm_set_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| |
| pr_debug("%s()\n", __func__); |
| if (msm_spk_control == ucontrol->value.integer.value[0]) |
| return 0; |
| |
| msm_spk_control = ucontrol->value.integer.value[0]; |
| msm_ext_control(codec); |
| return 1; |
| } |
| static int msm_spkramp_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| { |
| pr_debug("%s() %x\n", __func__, SND_SOC_DAPM_EVENT_ON(event)); |
| |
| if (SND_SOC_DAPM_EVENT_ON(event)) { |
| if (!strncmp(w->name, "Ext Spk Bottom Pos", 18)) |
| msm_ext_spk_power_amp_on(BOTTOM_SPK_AMP_POS); |
| else if (!strncmp(w->name, "Ext Spk Bottom Neg", 18)) |
| msm_ext_spk_power_amp_on(BOTTOM_SPK_AMP_NEG); |
| else if (!strncmp(w->name, "Ext Spk Top Pos", 15)) |
| msm_ext_spk_power_amp_on(TOP_SPK_AMP_POS); |
| else if (!strncmp(w->name, "Ext Spk Top Neg", 15)) |
| msm_ext_spk_power_amp_on(TOP_SPK_AMP_NEG); |
| else { |
| pr_err("%s() Invalid Speaker Widget = %s\n", |
| __func__, w->name); |
| return -EINVAL; |
| } |
| |
| } else { |
| if (!strncmp(w->name, "Ext Spk Bottom Pos", 18)) |
| msm_ext_spk_power_amp_off(BOTTOM_SPK_AMP_POS); |
| else if (!strncmp(w->name, "Ext Spk Bottom Neg", 18)) |
| msm_ext_spk_power_amp_off(BOTTOM_SPK_AMP_NEG); |
| else if (!strncmp(w->name, "Ext Spk Top Pos", 15)) |
| msm_ext_spk_power_amp_off(TOP_SPK_AMP_POS); |
| else if (!strncmp(w->name, "Ext Spk Top Neg", 15)) |
| msm_ext_spk_power_amp_off(TOP_SPK_AMP_NEG); |
| else { |
| pr_err("%s() Invalid Speaker Widget = %s\n", |
| __func__, w->name); |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| |
| static int msm_enable_codec_ext_clk(struct snd_soc_codec *codec, int enable, |
| bool dapm) |
| { |
| return 0; |
| } |
| |
| static int msm_mclk_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget msm_dapm_widgets[] = { |
| |
| SND_SOC_DAPM_SUPPLY("MCLK", SND_SOC_NOPM, 0, 0, |
| msm_mclk_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), |
| |
| SND_SOC_DAPM_SPK("Ext Spk Bottom Pos", msm_spkramp_event), |
| SND_SOC_DAPM_SPK("Ext Spk Bottom Neg", msm_spkramp_event), |
| |
| SND_SOC_DAPM_SPK("Ext Spk Top Pos", msm_spkramp_event), |
| SND_SOC_DAPM_SPK("Ext Spk Top Neg", msm_spkramp_event), |
| |
| SND_SOC_DAPM_MIC("Handset Mic", NULL), |
| SND_SOC_DAPM_MIC("Headset Mic", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic1", NULL), |
| SND_SOC_DAPM_MIC("ANCRight Headset Mic", NULL), |
| SND_SOC_DAPM_MIC("ANCLeft Headset Mic", NULL), |
| |
| SND_SOC_DAPM_MIC("Digital Mic1", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic2", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic3", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic4", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic5", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic6", NULL), |
| |
| }; |
| |
| static const struct snd_soc_dapm_route common_audio_map[] = { |
| |
| {"RX_BIAS", NULL, "MCLK"}, |
| {"LDO_H", NULL, "MCLK"}, |
| |
| /* Speaker path */ |
| {"Ext Spk Bottom Pos", NULL, "LINEOUT1"}, |
| {"Ext Spk Bottom Neg", NULL, "LINEOUT3"}, |
| |
| {"Ext Spk Top Pos", NULL, "LINEOUT2"}, |
| {"Ext Spk Top Neg", NULL, "LINEOUT4"}, |
| |
| /* Microphone path */ |
| {"AMIC1", NULL, "MIC BIAS1 Internal1"}, |
| {"MIC BIAS1 Internal1", NULL, "Handset Mic"}, |
| |
| {"AMIC2", NULL, "MIC BIAS2 External"}, |
| {"MIC BIAS2 External", NULL, "Headset Mic"}, |
| |
| /** |
| * AMIC3 and AMIC4 inputs are connected to ANC microphones |
| * These mics are biased differently on CDP and FLUID |
| * routing entries below are based on bias arrangement |
| * on FLUID. |
| */ |
| {"AMIC3", NULL, "MIC BIAS3 Internal1"}, |
| {"MIC BIAS3 Internal1", NULL, "ANCRight Headset Mic"}, |
| |
| {"AMIC4", NULL, "MIC BIAS1 Internal2"}, |
| {"MIC BIAS1 Internal2", NULL, "ANCLeft Headset Mic"}, |
| |
| {"HEADPHONE", NULL, "LDO_H"}, |
| |
| /** |
| * The digital Mic routes are setup considering |
| * fluid as default device. |
| */ |
| |
| /** |
| * Digital Mic1. Front Bottom left Digital Mic on Fluid and MTP. |
| * Digital Mic GM5 on CDP mainboard. |
| * Conncted to DMIC2 Input on Tabla codec. |
| */ |
| {"DMIC2", NULL, "MIC BIAS1 External"}, |
| {"MIC BIAS1 External", NULL, "Digital Mic1"}, |
| |
| /** |
| * Digital Mic2. Front Bottom right Digital Mic on Fluid and MTP. |
| * Digital Mic GM6 on CDP mainboard. |
| * Conncted to DMIC1 Input on Tabla codec. |
| */ |
| {"DMIC1", NULL, "MIC BIAS1 External"}, |
| {"MIC BIAS1 External", NULL, "Digital Mic2"}, |
| |
| /** |
| * Digital Mic3. Back Bottom Digital Mic on Fluid. |
| * Digital Mic GM1 on CDP mainboard. |
| * Conncted to DMIC4 Input on Tabla codec. |
| */ |
| {"DMIC4", NULL, "MIC BIAS3 External"}, |
| {"MIC BIAS3 External", NULL, "Digital Mic3"}, |
| |
| /** |
| * Digital Mic4. Back top Digital Mic on Fluid. |
| * Digital Mic GM2 on CDP mainboard. |
| * Conncted to DMIC3 Input on Tabla codec. |
| */ |
| {"DMIC3", NULL, "MIC BIAS3 External"}, |
| {"MIC BIAS3 External", NULL, "Digital Mic4"}, |
| |
| /** |
| * Digital Mic5. Front top Digital Mic on Fluid. |
| * Digital Mic GM3 on CDP mainboard. |
| * Conncted to DMIC5 Input on Tabla codec. |
| */ |
| {"DMIC5", NULL, "MIC BIAS4 External"}, |
| {"MIC BIAS4 External", NULL, "Digital Mic5"}, |
| |
| /* Tabla digital Mic6 - back bottom digital Mic on Liquid and |
| * bottom mic on CDP. FLUID/MTP do not have dmic6 installed. |
| */ |
| {"DMIC6", NULL, "MIC BIAS4 External"}, |
| {"MIC BIAS4 External", NULL, "Digital Mic6"}, |
| }; |
| |
| static const char *const spk_function[] = {"Off", "On"}; |
| static const char *const slim0_rx_ch_text[] = {"One", "Two"}; |
| static const char *const slim0_tx_ch_text[] = {"One", "Two", "Three", "Four"}; |
| |
| static const struct soc_enum msm_enum[] = { |
| SOC_ENUM_SINGLE_EXT(2, spk_function), |
| SOC_ENUM_SINGLE_EXT(2, slim0_rx_ch_text), |
| SOC_ENUM_SINGLE_EXT(4, slim0_tx_ch_text), |
| }; |
| |
| static const char *const btsco_rate_text[] = {"8000", "16000"}; |
| static const struct soc_enum msm_btsco_enum[] = { |
| SOC_ENUM_SINGLE_EXT(2, btsco_rate_text), |
| }; |
| |
| static int msm_slim_0_rx_ch_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| pr_debug("%s: msm_slim_0_rx_ch = %d\n", __func__, |
| msm_slim_0_rx_ch); |
| ucontrol->value.integer.value[0] = msm_slim_0_rx_ch - 1; |
| return 0; |
| } |
| |
| static int msm_slim_0_rx_ch_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| msm_slim_0_rx_ch = ucontrol->value.integer.value[0] + 1; |
| |
| pr_debug("%s: msm_slim_0_rx_ch = %d\n", __func__, |
| msm_slim_0_rx_ch); |
| return 1; |
| } |
| |
| static int msm_slim_0_tx_ch_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| pr_debug("%s: msm_slim_0_tx_ch = %d\n", __func__, |
| msm_slim_0_tx_ch); |
| ucontrol->value.integer.value[0] = msm_slim_0_tx_ch - 1; |
| return 0; |
| } |
| |
| static int msm_slim_0_tx_ch_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| msm_slim_0_tx_ch = ucontrol->value.integer.value[0] + 1; |
| |
| pr_debug("%s: msm_slim_0_tx_ch = %d\n", __func__, |
| msm_slim_0_tx_ch); |
| return 1; |
| } |
| |
| static int msm_btsco_rate_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| pr_debug("%s: msm_btsco_rate = %d", __func__, |
| msm_btsco_rate); |
| ucontrol->value.integer.value[0] = msm_btsco_rate; |
| return 0; |
| } |
| |
| static int msm_btsco_rate_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| switch (ucontrol->value.integer.value[0]) { |
| case 0: |
| msm_btsco_rate = BTSCO_RATE_8KHZ; |
| break; |
| case 1: |
| msm_btsco_rate = BTSCO_RATE_16KHZ; |
| break; |
| default: |
| msm_btsco_rate = BTSCO_RATE_8KHZ; |
| break; |
| } |
| pr_debug("%s: msm_btsco_rate = %d\n", __func__, |
| msm_btsco_rate); |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new tabla_msm_controls[] = { |
| SOC_ENUM_EXT("Speaker Function", msm_enum[0], msm_get_spk, |
| msm_set_spk), |
| SOC_ENUM_EXT("SLIM_0_RX Channels", msm_enum[1], |
| msm_slim_0_rx_ch_get, msm_slim_0_rx_ch_put), |
| SOC_ENUM_EXT("SLIM_0_TX Channels", msm_enum[2], |
| msm_slim_0_tx_ch_get, msm_slim_0_tx_ch_put), |
| }; |
| |
| static const struct snd_kcontrol_new int_btsco_rate_mixer_controls[] = { |
| SOC_ENUM_EXT("Internal BTSCO SampleRate", msm_btsco_enum[0], |
| msm_btsco_rate_get, msm_btsco_rate_put), |
| }; |
| |
| static int msm_auxpcm_be_params_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| |
| struct snd_interval *channels = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| |
| /* PCM only supports mono output with 8khz sample rate */ |
| rate->min = rate->max = 8000; |
| channels->min = channels->max = 1; |
| |
| return 0; |
| } |
| static int msm_aux_pcm_get_gpios(void) |
| { |
| int ret = 0; |
| |
| pr_debug("%s\n", __func__); |
| |
| ret = gpio_request(GPIO_AUX_PCM_DOUT, "AUX PCM DOUT"); |
| if (ret < 0) { |
| pr_err("%s: Failed to request gpio(%d): AUX PCM DOUT", |
| __func__, GPIO_AUX_PCM_DOUT); |
| goto fail_dout; |
| } |
| |
| ret = gpio_request(GPIO_AUX_PCM_DIN, "AUX PCM DIN"); |
| if (ret < 0) { |
| pr_err("%s: Failed to request gpio(%d): AUX PCM DIN", |
| __func__, GPIO_AUX_PCM_DIN); |
| goto fail_din; |
| } |
| |
| ret = gpio_request(GPIO_AUX_PCM_SYNC, "AUX PCM SYNC"); |
| if (ret < 0) { |
| pr_err("%s: Failed to request gpio(%d): AUX PCM SYNC", |
| __func__, GPIO_AUX_PCM_SYNC); |
| goto fail_sync; |
| } |
| ret = gpio_request(GPIO_AUX_PCM_CLK, "AUX PCM CLK"); |
| if (ret < 0) { |
| pr_err("%s: Failed to request gpio(%d): AUX PCM CLK", |
| __func__, GPIO_AUX_PCM_CLK); |
| goto fail_clk; |
| } |
| |
| return 0; |
| |
| fail_clk: |
| gpio_free(GPIO_AUX_PCM_SYNC); |
| fail_sync: |
| gpio_free(GPIO_AUX_PCM_DIN); |
| fail_din: |
| gpio_free(GPIO_AUX_PCM_DOUT); |
| fail_dout: |
| |
| return ret; |
| } |
| static int msm_aux_pcm_free_gpios(void) |
| { |
| gpio_free(GPIO_AUX_PCM_DIN); |
| gpio_free(GPIO_AUX_PCM_DOUT); |
| gpio_free(GPIO_AUX_PCM_SYNC); |
| gpio_free(GPIO_AUX_PCM_CLK); |
| |
| return 0; |
| } |
| |
| static int msm_auxpcm_startup(struct snd_pcm_substream *substream) |
| { |
| int ret = 0; |
| |
| pr_debug("%s(): substream = %s\n", __func__, substream->name); |
| ret = msm_aux_pcm_get_gpios(); |
| if (ret < 0) { |
| pr_err("%s: Aux PCM GPIO request failed\n", __func__); |
| return -EINVAL; |
| } |
| return ret; |
| } |
| |
| static void msm_auxpcm_shutdown(struct snd_pcm_substream *substream) |
| { |
| |
| pr_debug("%s(): substream = %s\n", __func__, substream->name); |
| msm_aux_pcm_free_gpios(); |
| } |
| static struct snd_soc_ops msm_auxpcm_be_ops = { |
| .startup = msm_auxpcm_startup, |
| .shutdown = msm_auxpcm_shutdown, |
| }; |
| /* Digital audio interface glue - connects codec <---> CPU */ |
| static struct snd_soc_dai_link msm_dai[] = { |
| /* FrontEnd DAI Links */ |
| { |
| .name = "MSM8974 Media1", |
| .stream_name = "MultiMedia1", |
| .cpu_dai_name = "MultiMedia1", |
| .platform_name = "msm-pcm-dsp", |
| .dynamic = 1, |
| .trigger = {SND_SOC_DPCM_TRIGGER_POST, |
| SND_SOC_DPCM_TRIGGER_POST}, |
| .codec_dai_name = "snd-soc-dummy-dai", |
| .codec_name = "snd-soc-dummy", |
| .ignore_suspend = 1, |
| /* this dainlink has playback support */ |
| .ignore_pmdown_time = 1, |
| .be_id = MSM_FRONTEND_DAI_MULTIMEDIA1 |
| }, |
| { |
| .name = "MSM VoIP", |
| .stream_name = "VoIP", |
| .cpu_dai_name = "VoIP", |
| .platform_name = "msm-voip-dsp", |
| .dynamic = 1, |
| .trigger = {SND_SOC_DPCM_TRIGGER_POST, |
| SND_SOC_DPCM_TRIGGER_POST}, |
| .codec_dai_name = "snd-soc-dummy-dai", |
| .codec_name = "snd-soc-dummy", |
| .ignore_suspend = 1, |
| /* this dainlink has playback support */ |
| .ignore_pmdown_time = 1, |
| .be_id = MSM_FRONTEND_DAI_VOIP, |
| }, |
| { |
| .name = "MSM8974 LPA", |
| .stream_name = "LPA", |
| .cpu_dai_name = "MultiMedia3", |
| .platform_name = "msm-pcm-lpa", |
| .dynamic = 1, |
| .trigger = {SND_SOC_DPCM_TRIGGER_POST, |
| SND_SOC_DPCM_TRIGGER_POST}, |
| .codec_dai_name = "snd-soc-dummy-dai", |
| .codec_name = "snd-soc-dummy", |
| .ignore_suspend = 1, |
| /* this dainlink has playback support */ |
| .ignore_pmdown_time = 1, |
| .be_id = MSM_FRONTEND_DAI_MULTIMEDIA3, |
| }, |
| { |
| .name = "MSM8974 Compr", |
| .stream_name = "COMPR", |
| .cpu_dai_name = "MultiMedia4", |
| .platform_name = "msm-compr-dsp", |
| .dynamic = 1, |
| .trigger = {SND_SOC_DPCM_TRIGGER_POST, |
| SND_SOC_DPCM_TRIGGER_POST}, |
| .codec_dai_name = "snd-soc-dummy-dai", |
| .codec_name = "snd-soc-dummy", |
| .ignore_suspend = 1, |
| .ignore_pmdown_time = 1, |
| /* this dainlink has playback support */ |
| .be_id = MSM_FRONTEND_DAI_MULTIMEDIA4, |
| }, |
| { |
| .name = "AUXPCM Hostless", |
| .stream_name = "AUXPCM Hostless", |
| .cpu_dai_name = "AUXPCM_HOSTLESS", |
| .platform_name = "msm-pcm-hostless", |
| .dynamic = 1, |
| .trigger = {SND_SOC_DPCM_TRIGGER_POST, |
| SND_SOC_DPCM_TRIGGER_POST}, |
| .no_host_mode = SND_SOC_DAI_LINK_NO_HOST, |
| .ignore_suspend = 1, |
| /* this dainlink has playback support */ |
| .ignore_pmdown_time = 1, |
| .codec_dai_name = "snd-soc-dummy-dai", |
| .codec_name = "snd-soc-dummy", |
| }, |
| |
| /* AUX PCM Backend DAI Links */ |
| { |
| .name = LPASS_BE_AUXPCM_RX, |
| .stream_name = "AUX PCM Playback", |
| .cpu_dai_name = "msm-dai-q6.4106", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-rx", |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_AUXPCM_RX, |
| .be_hw_params_fixup = msm_auxpcm_be_params_fixup, |
| .ops = &msm_auxpcm_be_ops, |
| .ignore_pmdown_time = 1, |
| /* this dainlink has playback support */ |
| }, |
| { |
| .name = LPASS_BE_AUXPCM_TX, |
| .stream_name = "AUX PCM Capture", |
| .cpu_dai_name = "msm-dai-q6.4107", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-tx", |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_AUXPCM_TX, |
| .be_hw_params_fixup = msm_auxpcm_be_params_fixup, |
| }, |
| |
| }; |
| |
| struct snd_soc_card snd_soc_card_msm = { |
| .name = "msm8974-taiko-snd-card", |
| .dai_link = msm_dai, |
| .num_links = ARRAY_SIZE(msm_dai), |
| }; |
| |
| static struct platform_device *msm_snd_device; |
| |
| static void msm_free_headset_mic_gpios(void) |
| { |
| if (msm_headset_gpios_configured) { |
| gpio_free(PM8921_GPIO_PM_TO_SYS(23)); |
| gpio_free(PM8921_GPIO_PM_TO_SYS(35)); |
| } |
| } |
| |
| static int __init msm_audio_init(void) |
| { |
| int ret = 0; |
| if (!machine_is_msm8974_sim()) { |
| pr_err("%s: Not the right machine type\n", __func__); |
| return -ENODEV; |
| } |
| msm_snd_device = platform_device_alloc("soc-audio", 0); |
| if (!msm_snd_device) { |
| pr_err("Platform device allocation failed\n"); |
| kfree(mbhc_cfg.calibration); |
| return -ENOMEM; |
| } |
| |
| platform_set_drvdata(msm_snd_device, &snd_soc_card_msm); |
| ret = platform_device_add(msm_snd_device); |
| if (ret) { |
| platform_device_put(msm_snd_device); |
| kfree(mbhc_cfg.calibration); |
| return ret; |
| } |
| return ret; |
| |
| } |
| module_init(msm_audio_init); |
| |
| static void __exit msm_audio_exit(void) |
| { |
| if (!machine_is_msm8974_sim()) { |
| pr_err("%s: Not the right machine type\n", __func__); |
| return ; |
| } |
| msm_free_headset_mic_gpios(); |
| platform_device_unregister(msm_snd_device); |
| kfree(mbhc_cfg.calibration); |
| } |
| module_exit(msm_audio_exit); |
| |
| MODULE_DESCRIPTION("ALSA SoC msm"); |
| MODULE_LICENSE("GPL v2"); |