| /* | 
 |  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner" | 
 |  * | 
 |  *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License as published by | 
 |  *  the Free Software Foundation; either version 2 of the License, or | 
 |  *  (at your option) any later version. | 
 |  * | 
 |  *  This program is distributed in the hope that it will be useful, | 
 |  *  but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * | 
 |  *  GNU General Public License for more details. | 
 |  * | 
 |  *  You should have received a copy of the GNU General Public License | 
 |  *  along with this program; if not, write to the Free Software | 
 |  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/dvb/frontend.h> | 
 | #include <linux/i2c.h> | 
 |  | 
 | #include "dvb_frontend.h" | 
 |  | 
 | #include "mt2131.h" | 
 | #include "mt2131_priv.h" | 
 |  | 
 | static int debug; | 
 | module_param(debug, int, 0644); | 
 | MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); | 
 |  | 
 | #define dprintk(level,fmt, arg...) if (debug >= level) \ | 
 | 	printk(KERN_INFO "%s: " fmt, "mt2131", ## arg) | 
 |  | 
 | static u8 mt2131_config1[] = { | 
 | 	0x01, | 
 | 	0x50, 0x00, 0x50, 0x80, 0x00, 0x49, 0xfa, 0x88, | 
 | 	0x08, 0x77, 0x41, 0x04, 0x00, 0x00, 0x00, 0x32, | 
 | 	0x7f, 0xda, 0x4c, 0x00, 0x10, 0xaa, 0x78, 0x80, | 
 | 	0xff, 0x68, 0xa0, 0xff, 0xdd, 0x00, 0x00 | 
 | }; | 
 |  | 
 | static u8 mt2131_config2[] = { | 
 | 	0x10, | 
 | 	0x7f, 0xc8, 0x0a, 0x5f, 0x00, 0x04 | 
 | }; | 
 |  | 
 | static int mt2131_readreg(struct mt2131_priv *priv, u8 reg, u8 *val) | 
 | { | 
 | 	struct i2c_msg msg[2] = { | 
 | 		{ .addr = priv->cfg->i2c_address, .flags = 0, | 
 | 		  .buf = ®, .len = 1 }, | 
 | 		{ .addr = priv->cfg->i2c_address, .flags = I2C_M_RD, | 
 | 		  .buf = val,  .len = 1 }, | 
 | 	}; | 
 |  | 
 | 	if (i2c_transfer(priv->i2c, msg, 2) != 2) { | 
 | 		printk(KERN_WARNING "mt2131 I2C read failed\n"); | 
 | 		return -EREMOTEIO; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mt2131_writereg(struct mt2131_priv *priv, u8 reg, u8 val) | 
 | { | 
 | 	u8 buf[2] = { reg, val }; | 
 | 	struct i2c_msg msg = { .addr = priv->cfg->i2c_address, .flags = 0, | 
 | 			       .buf = buf, .len = 2 }; | 
 |  | 
 | 	if (i2c_transfer(priv->i2c, &msg, 1) != 1) { | 
 | 		printk(KERN_WARNING "mt2131 I2C write failed\n"); | 
 | 		return -EREMOTEIO; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mt2131_writeregs(struct mt2131_priv *priv,u8 *buf, u8 len) | 
 | { | 
 | 	struct i2c_msg msg = { .addr = priv->cfg->i2c_address, | 
 | 			       .flags = 0, .buf = buf, .len = len }; | 
 |  | 
 | 	if (i2c_transfer(priv->i2c, &msg, 1) != 1) { | 
 | 		printk(KERN_WARNING "mt2131 I2C write failed (len=%i)\n", | 
 | 		       (int)len); | 
 | 		return -EREMOTEIO; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mt2131_set_params(struct dvb_frontend *fe, | 
 | 			     struct dvb_frontend_parameters *params) | 
 | { | 
 | 	struct mt2131_priv *priv; | 
 | 	int ret=0, i; | 
 | 	u32 freq; | 
 | 	u8  if_band_center; | 
 | 	u32 f_lo1, f_lo2; | 
 | 	u32 div1, num1, div2, num2; | 
 | 	u8  b[8]; | 
 | 	u8 lockval = 0; | 
 |  | 
 | 	priv = fe->tuner_priv; | 
 | 	if (fe->ops.info.type == FE_OFDM) | 
 | 		priv->bandwidth = params->u.ofdm.bandwidth; | 
 | 	else | 
 | 		priv->bandwidth = 0; | 
 |  | 
 | 	freq = params->frequency / 1000;  // Hz -> kHz | 
 | 	dprintk(1, "%s() freq=%d\n", __func__, freq); | 
 |  | 
 | 	f_lo1 = freq + MT2131_IF1 * 1000; | 
 | 	f_lo1 = (f_lo1 / 250) * 250; | 
 | 	f_lo2 = f_lo1 - freq - MT2131_IF2; | 
 |  | 
 | 	priv->frequency =  (f_lo1 - f_lo2 - MT2131_IF2) * 1000; | 
 |  | 
 | 	/* Frequency LO1 = 16MHz * (DIV1 + NUM1/8192 ) */ | 
 | 	num1 = f_lo1 * 64 / (MT2131_FREF / 128); | 
 | 	div1 = num1 / 8192; | 
 | 	num1 &= 0x1fff; | 
 |  | 
 | 	/* Frequency LO2 = 16MHz * (DIV2 + NUM2/8192 ) */ | 
 | 	num2 = f_lo2 * 64 / (MT2131_FREF / 128); | 
 | 	div2 = num2 / 8192; | 
 | 	num2 &= 0x1fff; | 
 |  | 
 | 	if (freq <=   82500) if_band_center = 0x00; else | 
 | 	if (freq <=  137500) if_band_center = 0x01; else | 
 | 	if (freq <=  192500) if_band_center = 0x02; else | 
 | 	if (freq <=  247500) if_band_center = 0x03; else | 
 | 	if (freq <=  302500) if_band_center = 0x04; else | 
 | 	if (freq <=  357500) if_band_center = 0x05; else | 
 | 	if (freq <=  412500) if_band_center = 0x06; else | 
 | 	if (freq <=  467500) if_band_center = 0x07; else | 
 | 	if (freq <=  522500) if_band_center = 0x08; else | 
 | 	if (freq <=  577500) if_band_center = 0x09; else | 
 | 	if (freq <=  632500) if_band_center = 0x0A; else | 
 | 	if (freq <=  687500) if_band_center = 0x0B; else | 
 | 	if (freq <=  742500) if_band_center = 0x0C; else | 
 | 	if (freq <=  797500) if_band_center = 0x0D; else | 
 | 	if (freq <=  852500) if_band_center = 0x0E; else | 
 | 	if (freq <=  907500) if_band_center = 0x0F; else | 
 | 	if (freq <=  962500) if_band_center = 0x10; else | 
 | 	if (freq <= 1017500) if_band_center = 0x11; else | 
 | 	if (freq <= 1072500) if_band_center = 0x12; else if_band_center = 0x13; | 
 |  | 
 | 	b[0] = 1; | 
 | 	b[1] = (num1 >> 5) & 0xFF; | 
 | 	b[2] = (num1 & 0x1F); | 
 | 	b[3] = div1; | 
 | 	b[4] = (num2 >> 5) & 0xFF; | 
 | 	b[5] = num2 & 0x1F; | 
 | 	b[6] = div2; | 
 |  | 
 | 	dprintk(1, "IF1: %dMHz IF2: %dMHz\n", MT2131_IF1, MT2131_IF2); | 
 | 	dprintk(1, "PLL freq=%dkHz  band=%d\n", (int)freq, (int)if_band_center); | 
 | 	dprintk(1, "PLL f_lo1=%dkHz  f_lo2=%dkHz\n", (int)f_lo1, (int)f_lo2); | 
 | 	dprintk(1, "PLL div1=%d  num1=%d  div2=%d  num2=%d\n", | 
 | 		(int)div1, (int)num1, (int)div2, (int)num2); | 
 | 	dprintk(1, "PLL [1..6]: %2x %2x %2x %2x %2x %2x\n", | 
 | 		(int)b[1], (int)b[2], (int)b[3], (int)b[4], (int)b[5], | 
 | 		(int)b[6]); | 
 |  | 
 | 	ret = mt2131_writeregs(priv,b,7); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	mt2131_writereg(priv, 0x0b, if_band_center); | 
 |  | 
 | 	/* Wait for lock */ | 
 | 	i = 0; | 
 | 	do { | 
 | 		mt2131_readreg(priv, 0x08, &lockval); | 
 | 		if ((lockval & 0x88) == 0x88) | 
 | 			break; | 
 | 		msleep(4); | 
 | 		i++; | 
 | 	} while (i < 10); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int mt2131_get_frequency(struct dvb_frontend *fe, u32 *frequency) | 
 | { | 
 | 	struct mt2131_priv *priv = fe->tuner_priv; | 
 | 	dprintk(1, "%s()\n", __func__); | 
 | 	*frequency = priv->frequency; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mt2131_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) | 
 | { | 
 | 	struct mt2131_priv *priv = fe->tuner_priv; | 
 | 	dprintk(1, "%s()\n", __func__); | 
 | 	*bandwidth = priv->bandwidth; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mt2131_get_status(struct dvb_frontend *fe, u32 *status) | 
 | { | 
 | 	struct mt2131_priv *priv = fe->tuner_priv; | 
 | 	u8 lock_status = 0; | 
 | 	u8 afc_status = 0; | 
 |  | 
 | 	*status = 0; | 
 |  | 
 | 	mt2131_readreg(priv, 0x08, &lock_status); | 
 | 	if ((lock_status & 0x88) == 0x88) | 
 | 		*status = TUNER_STATUS_LOCKED; | 
 |  | 
 | 	mt2131_readreg(priv, 0x09, &afc_status); | 
 | 	dprintk(1, "%s() - LO Status = 0x%x, AFC Status = 0x%x\n", | 
 | 		__func__, lock_status, afc_status); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mt2131_init(struct dvb_frontend *fe) | 
 | { | 
 | 	struct mt2131_priv *priv = fe->tuner_priv; | 
 | 	int ret; | 
 | 	dprintk(1, "%s()\n", __func__); | 
 |  | 
 | 	if ((ret = mt2131_writeregs(priv, mt2131_config1, | 
 | 				    sizeof(mt2131_config1))) < 0) | 
 | 		return ret; | 
 |  | 
 | 	mt2131_writereg(priv, 0x0b, 0x09); | 
 | 	mt2131_writereg(priv, 0x15, 0x47); | 
 | 	mt2131_writereg(priv, 0x07, 0xf2); | 
 | 	mt2131_writereg(priv, 0x0b, 0x01); | 
 |  | 
 | 	if ((ret = mt2131_writeregs(priv, mt2131_config2, | 
 | 				    sizeof(mt2131_config2))) < 0) | 
 | 		return ret; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int mt2131_release(struct dvb_frontend *fe) | 
 | { | 
 | 	dprintk(1, "%s()\n", __func__); | 
 | 	kfree(fe->tuner_priv); | 
 | 	fe->tuner_priv = NULL; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct dvb_tuner_ops mt2131_tuner_ops = { | 
 | 	.info = { | 
 | 		.name           = "Microtune MT2131", | 
 | 		.frequency_min  =  48000000, | 
 | 		.frequency_max  = 860000000, | 
 | 		.frequency_step =     50000, | 
 | 	}, | 
 |  | 
 | 	.release       = mt2131_release, | 
 | 	.init          = mt2131_init, | 
 |  | 
 | 	.set_params    = mt2131_set_params, | 
 | 	.get_frequency = mt2131_get_frequency, | 
 | 	.get_bandwidth = mt2131_get_bandwidth, | 
 | 	.get_status    = mt2131_get_status | 
 | }; | 
 |  | 
 | struct dvb_frontend * mt2131_attach(struct dvb_frontend *fe, | 
 | 				    struct i2c_adapter *i2c, | 
 | 				    struct mt2131_config *cfg, u16 if1) | 
 | { | 
 | 	struct mt2131_priv *priv = NULL; | 
 | 	u8 id = 0; | 
 |  | 
 | 	dprintk(1, "%s()\n", __func__); | 
 |  | 
 | 	priv = kzalloc(sizeof(struct mt2131_priv), GFP_KERNEL); | 
 | 	if (priv == NULL) | 
 | 		return NULL; | 
 |  | 
 | 	priv->cfg = cfg; | 
 | 	priv->bandwidth = 6000000; /* 6MHz */ | 
 | 	priv->i2c = i2c; | 
 |  | 
 | 	if (mt2131_readreg(priv, 0, &id) != 0) { | 
 | 		kfree(priv); | 
 | 		return NULL; | 
 | 	} | 
 | 	if ( (id != 0x3E) && (id != 0x3F) ) { | 
 | 		printk(KERN_ERR "MT2131: Device not found at addr 0x%02x\n", | 
 | 		       cfg->i2c_address); | 
 | 		kfree(priv); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	printk(KERN_INFO "MT2131: successfully identified at address 0x%02x\n", | 
 | 	       cfg->i2c_address); | 
 | 	memcpy(&fe->ops.tuner_ops, &mt2131_tuner_ops, | 
 | 	       sizeof(struct dvb_tuner_ops)); | 
 |  | 
 | 	fe->tuner_priv = priv; | 
 | 	return fe; | 
 | } | 
 | EXPORT_SYMBOL(mt2131_attach); | 
 |  | 
 | MODULE_AUTHOR("Steven Toth"); | 
 | MODULE_DESCRIPTION("Microtune MT2131 silicon tuner driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | /* | 
 |  * Local variables: | 
 |  * c-basic-offset: 8 | 
 |  */ |