msm: board-msm7627a-camera: Create separate board file for camera
Change-Id: Iddc0f89192a838280f68377bc7e248c11154565e
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-qrd7627a.c b/arch/arm/mach-msm/board-qrd7627a.c
index 109d98d..f3efb3a 100644
--- a/arch/arm/mach-msm/board-qrd7627a.c
+++ b/arch/arm/mach-msm/board-qrd7627a.c
@@ -68,20 +68,6 @@
#define I2C_PIN_CTL 0x15
#define I2C_NORMAL 0x40
-enum {
- GPIO_HOST_VBUS_EN = 107,
- GPIO_BT_SYS_REST_EN = 114,
- GPIO_WAKE_ON_WIRELESS,
- GPIO_BACKLIGHT_EN,
- GPIO_NC,
- GPIO_CAM_3MP_PWDN, /* CAM_VGA */
- GPIO_WLAN_EN,
- GPIO_CAM_5MP_SHDN_EN,
- GPIO_CAM_5MP_RESET,
- GPIO_TP,
- GPIO_CAM_GP_CAMIF_RESET,
-};
-
static struct platform_device msm_wlan_ar6000_pm_device = {
.name = "wlan_ar6000_pm_dev",
.id = -1,
@@ -295,7 +281,7 @@
int rc = 0;
unsigned gpio;
- gpio = GPIO_HOST_VBUS_EN;
+ gpio = QRD_GPIO_HOST_VBUS_EN;
rc = gpio_request(gpio, "i2c_host_vbus_en");
if (rc < 0) {
@@ -518,7 +504,7 @@
static int mipi_truly_set_bl(int on)
{
- gpio_set_value_cansleep(GPIO_BACKLIGHT_EN, !!on);
+ gpio_set_value_cansleep(QRD_GPIO_BACKLIGHT_EN, !!on);
return 1;
}
@@ -740,275 +726,6 @@
.dev.platform_data = &msm_psy_batt_data,
};
-#ifdef CONFIG_MSM_CAMERA
-static uint32_t camera_off_gpio_table[] = {
- GPIO_CFG(15, 0, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
-};
-
-static uint32_t camera_on_gpio_table[] = {
- GPIO_CFG(15, 1, GPIO_CFG_OUTPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
-};
-
-static void qrd1_camera_gpio_cfg(void)
-{
-
- int rc = 0;
-
- rc = gpio_request(GPIO_CAM_5MP_SHDN_EN, "ov5640");
- if (rc < 0)
- pr_err("%s: gpio_request---GPIO_CAM_5MP_SHDN_EN failed!",
- __func__);
-
-
- rc = gpio_tlmm_config(GPIO_CFG(GPIO_CAM_5MP_SHDN_EN, 0,
- GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
- GPIO_CFG_2MA), GPIO_CFG_ENABLE);
- if (rc < 0) {
- pr_err("%s: unable to enable Power Down gpio for main"
- "camera!\n", __func__);
- gpio_free(GPIO_CAM_5MP_SHDN_EN);
- }
-
-
- rc = gpio_request(GPIO_CAM_5MP_RESET, "ov5640");
- if (rc < 0) {
- pr_err("%s: gpio_request---GPIO_CAM_5MP_RESET failed!",
- __func__);
- gpio_free(GPIO_CAM_5MP_SHDN_EN);
- }
-
-
- rc = gpio_tlmm_config(GPIO_CFG(GPIO_CAM_5MP_RESET, 0,
- GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
- GPIO_CFG_2MA), GPIO_CFG_ENABLE);
- if (rc < 0) {
- pr_err("%s: unable to enable reset gpio for main camera!\n",
- __func__);
- gpio_free(GPIO_CAM_5MP_RESET);
- }
-
- rc = gpio_request(GPIO_CAM_3MP_PWDN, "ov7692");
- if (rc < 0)
- pr_err("%s: gpio_request---GPIO_CAM_3MP_PWDN failed!",
- __func__);
-
- rc = gpio_tlmm_config(GPIO_CFG(GPIO_CAM_3MP_PWDN, 0,
- GPIO_CFG_OUTPUT, GPIO_CFG_PULL_UP,
- GPIO_CFG_2MA), GPIO_CFG_ENABLE);
- if (rc < 0) {
- pr_err("%s: unable to enable Power Down gpio for front"
- "camera!\n", __func__);
- gpio_free(GPIO_CAM_3MP_PWDN);
- }
-
- gpio_direction_output(GPIO_CAM_5MP_SHDN_EN, 1);
- gpio_direction_output(GPIO_CAM_5MP_RESET, 1);
- gpio_direction_output(GPIO_CAM_3MP_PWDN, 1);
-}
-
-#endif
-static struct regulator_bulk_data regs_camera[] = {
- { .supply = "msme1", .min_uV = 1800000, .max_uV = 1800000 },
- { .supply = "gp2", .min_uV = 2850000, .max_uV = 2850000 },
- { .supply = "usb2", .min_uV = 1800000, .max_uV = 1800000 },
-};
-
-static void __init msm_camera_vreg_init(void)
-{
- int rc;
-
- rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);
- if (rc) {
- pr_err("%s: could not get regulators: %d\n", __func__, rc);
- return;
- }
-
- rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);
- if (rc) {
- pr_err("%s: could not set voltages: %d\n", __func__, rc);
- return;
- }
-}
-
-static void msm_camera_vreg_config(int vreg_en)
-{
- int rc = vreg_en ?
- regulator_bulk_enable(ARRAY_SIZE(regs_camera), regs_camera) :
- regulator_bulk_disable(ARRAY_SIZE(regs_camera), regs_camera);
-
- if (rc)
- pr_err("%s: could not %sable regulators: %d\n",
- __func__, vreg_en ? "en" : "dis", rc);
-}
-static int config_gpio_table(uint32_t *table, int len)
-{
- int rc = 0, i = 0;
-
- for (i = 0; i < len; i++) {
- rc = gpio_tlmm_config(table[i], GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("%s not able to get gpio\n", __func__);
- for (i--; i >= 0; i--)
- gpio_tlmm_config(camera_off_gpio_table[i],
- GPIO_CFG_ENABLE);
- break;
- }
- }
- return rc;
-}
-
-static int config_camera_on_gpios_rear(void)
-{
- int rc = 0;
-
- msm_camera_vreg_config(1);
-
- rc = config_gpio_table(camera_on_gpio_table,
- ARRAY_SIZE(camera_on_gpio_table));
- if (rc < 0) {
- pr_err("%s: CAMSENSOR gpio table request"
- "failed\n", __func__);
- return rc;
- }
-
- return rc;
-}
-
-static void config_camera_off_gpios_rear(void)
-{
- msm_camera_vreg_config(0);
- config_gpio_table(camera_off_gpio_table,
- ARRAY_SIZE(camera_off_gpio_table));
-}
-
-static int config_camera_on_gpios_front(void)
-{
- int rc = 0;
-
- msm_camera_vreg_config(1);
-
- rc = config_gpio_table(camera_on_gpio_table,
- ARRAY_SIZE(camera_on_gpio_table));
- if (rc < 0) {
- pr_err("%s: CAMSENSOR gpio table request"
- "failed\n", __func__);
- return rc;
- }
-
- return rc;
-}
-
-static void config_camera_off_gpios_front(void)
-{
- msm_camera_vreg_config(0);
-
- config_gpio_table(camera_off_gpio_table,
- ARRAY_SIZE(camera_off_gpio_table));
-}
-
-struct msm_camera_device_platform_data msm_camera_data_rear = {
- .camera_gpio_on = config_camera_on_gpios_rear,
- .camera_gpio_off = config_camera_off_gpios_rear,
- .ioext.csiphy = 0xA1000000,
- .ioext.csisz = 0x00100000,
- .ioext.csiirq = INT_CSI_IRQ_1,
- .ioclk.mclk_clk_rate = 24000000,
- .ioclk.vfe_clk_rate = 192000000,
- .ioext.appphy = MSM_CLK_CTL_PHYS,
- .ioext.appsz = MSM_CLK_CTL_SIZE,
-};
-
-struct msm_camera_device_platform_data msm_camera_data_front = {
- .camera_gpio_on = config_camera_on_gpios_front,
- .camera_gpio_off = config_camera_off_gpios_front,
- .ioext.csiphy = 0xA0F00000,
- .ioext.csisz = 0x00100000,
- .ioext.csiirq = INT_CSI_IRQ_0,
- .ioclk.mclk_clk_rate = 24000000,
- .ioclk.vfe_clk_rate = 192000000,
- .ioext.appphy = MSM_CLK_CTL_PHYS,
- .ioext.appsz = MSM_CLK_CTL_SIZE,
-};
-
-#ifdef CONFIG_OV5640
-static struct msm_camera_sensor_platform_info ov5640_sensor_info = {
- .mount_angle = 90
-};
-
-static struct msm_camera_sensor_flash_src msm_flash_src_ov5640 = {
- .flash_sr_type = MSM_CAMERA_FLASH_SRC_LED,
- ._fsrc.led_src.led_name = "flashlight",
- ._fsrc.led_src.led_name_len = 10,
-};
-
-static struct msm_camera_sensor_flash_data flash_ov5640 = {
- .flash_type = MSM_CAMERA_FLASH_LED,
- .flash_src = &msm_flash_src_ov5640,
-};
-
-static struct msm_camera_sensor_info msm_camera_sensor_ov5640_data = {
- .sensor_name = "ov5640",
- .sensor_reset_enable = 1,
- .sensor_reset = GPIO_CAM_5MP_RESET,
- .sensor_pwd = GPIO_CAM_5MP_SHDN_EN,
- .vcm_pwd = 0,
- .vcm_enable = 0,
- .pdata = &msm_camera_data_rear,
- .flash_data = &flash_ov5640,
- .sensor_platform_info = &ov5640_sensor_info,
- .csi_if = 1,
-};
-
-static struct platform_device msm_camera_sensor_ov5640 = {
- .name = "msm_camera_ov5640",
- .dev = {
- .platform_data = &msm_camera_sensor_ov5640_data,
- },
-};
-#endif
-
-#ifdef CONFIG_WEBCAM_OV7692_QRD
-static struct msm_camera_sensor_platform_info ov7692_sensor_7627a_info = {
- .mount_angle = 90
-};
-
-static struct msm_camera_sensor_flash_data flash_ov7692 = {
- .flash_type = MSM_CAMERA_FLASH_NONE,
-};
-
-static struct msm_camera_sensor_info msm_camera_sensor_ov7692_data = {
- .sensor_name = "ov7692",
- .sensor_reset_enable = 0,
- .sensor_reset = 0,
- .sensor_pwd = GPIO_CAM_3MP_PWDN,
- .vcm_pwd = 0,
- .vcm_enable = 0,
- .pdata = &msm_camera_data_front,
- .flash_data = &flash_ov7692,
- .sensor_platform_info = &ov7692_sensor_7627a_info,
- .csi_if = 1,
-};
-
-static struct platform_device msm_camera_sensor_ov7692 = {
- .name = "msm_camera_ov7692",
- .dev = {
- .platform_data = &msm_camera_sensor_ov7692_data,
- },
-};
-#endif
-
-static struct i2c_board_info i2c_camera_devices[] = {
- #ifdef CONFIG_OV5640
- {
- I2C_BOARD_INFO("ov5640", 0x78 >> 1),
- },
- #endif
- #ifdef CONFIG_WEBCAM_OV7692_QRD
- {
- I2C_BOARD_INFO("ov7692", 0x78),
- },
- #endif
-};
static struct platform_device *qrd1_devices[] __initdata = {
&msm_device_dmov,
&msm_device_smd,
@@ -1026,12 +743,6 @@
&msm_device_snd,
&msm_device_adspdec,
&msm_batt_device,
-#ifdef CONFIG_OV5640
- &msm_camera_sensor_ov5640,
-#endif
-#ifdef CONFIG_WEBCAM_OV7692_QRD
- &msm_camera_sensor_ov7692,
-#endif
&msm_kgsl_3d0,
#ifdef CONFIG_BT
&msm_bt_power_device,
@@ -1184,11 +895,11 @@
int rc = 0;
if (!dsi_gpio_initialized) {
- rc = gpio_request(GPIO_BACKLIGHT_EN, "gpio_bkl_en");
+ rc = gpio_request(QRD_GPIO_BACKLIGHT_EN, "gpio_bkl_en");
if (rc < 0)
return rc;
- rc = gpio_tlmm_config(GPIO_CFG(GPIO_BACKLIGHT_EN, 0,
+ rc = gpio_tlmm_config(GPIO_CFG(QRD_GPIO_BACKLIGHT_EN, 0,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
GPIO_CFG_ENABLE);
if (rc < 0) {
@@ -1196,16 +907,16 @@
return rc;
}
- rc = gpio_direction_output(GPIO_BACKLIGHT_EN, 1);
+ rc = gpio_direction_output(QRD_GPIO_BACKLIGHT_EN, 1);
if (rc < 0) {
pr_err("failed to enable backlight\n");
- gpio_free(GPIO_BACKLIGHT_EN);
+ gpio_free(QRD_GPIO_BACKLIGHT_EN);
return rc;
}
dsi_gpio_initialized = 1;
}
- gpio_set_value_cansleep(GPIO_BACKLIGHT_EN, !!on);
+ gpio_set_value_cansleep(QRD_GPIO_BACKLIGHT_EN, !!on);
if (!on) {
gpio_set_value_cansleep(GPIO_LCDC_BRDG_RESET_N, 1);
@@ -1363,8 +1074,6 @@
#endif
msm_camera_vreg_init();
- i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID, i2c_camera_devices,
- ARRAY_SIZE(i2c_camera_devices));
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C) || \
defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C_MODULE)