msm: board-8930: Add support for PMIC PM8917
Add support for boards consisting of MSM8930 + PM8917.
Conditionally Remove configuration for peripherals not present in
PM8917. Also remap GPIOs and MPPs as follows:
GPIOs:
PM8038 PM8917
1 24
2 25
3 27
4 19
5 25
6 23
7 38
8 28
9 20
10 36
11 37
12 21
MPPs:
PM8038 PM8917
1 5
2 6
3 10
4 8
5 7
6 9
Change-Id: I38166aaa85271b9d7f857f27b070fc36a0d0a803
Signed-off-by: David Collins <collinsd@codeaurora.org>
(cherry picked from commit fd344aa2e4fc70cb33b0a0623577662288a7674e)
diff --git a/arch/arm/mach-msm/board-8930-pmic.c b/arch/arm/mach-msm/board-8930-pmic.c
index a3e1b27..82ab492 100644
--- a/arch/arm/mach-msm/board-8930-pmic.c
+++ b/arch/arm/mach-msm/board-8930-pmic.c
@@ -18,6 +18,7 @@
#include <asm/mach-types.h>
#include <mach/msm_bus_board.h>
#include <mach/restart.h>
+#include <mach/socinfo.h>
#include "devices.h"
#include "board-8930.h"
@@ -31,7 +32,7 @@
struct pm8xxx_mpp_config_data config;
};
-#define PM8XXX_GPIO_INIT(_gpio, _dir, _buf, _val, _pull, _vin, _out_strength, \
+#define PM8038_GPIO_INIT(_gpio, _dir, _buf, _val, _pull, _vin, _out_strength, \
_func, _inv, _disable) \
{ \
.gpio = PM8038_GPIO_PM_TO_SYS(_gpio), \
@@ -48,7 +49,7 @@
} \
}
-#define PM8XXX_MPP_INIT(_mpp, _type, _level, _control) \
+#define PM8038_MPP_INIT(_mpp, _type, _level, _control) \
{ \
.mpp = PM8038_MPP_PM_TO_SYS(_mpp), \
.config = { \
@@ -58,49 +59,126 @@
} \
}
-#define PM8XXX_GPIO_DISABLE(_gpio) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, 0, 0, 0, PM8038_GPIO_VIN_L11, \
+#define PM8038_GPIO_DISABLE(_gpio) \
+ PM8038_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, 0, 0, 0, PM8038_GPIO_VIN_L11, \
0, 0, 0, 1)
-#define PM8XXX_GPIO_OUTPUT(_gpio, _val) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
+#define PM8038_GPIO_OUTPUT(_gpio, _val) \
+ PM8038_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
PM_GPIO_PULL_NO, PM8038_GPIO_VIN_L11, \
PM_GPIO_STRENGTH_HIGH, \
PM_GPIO_FUNC_NORMAL, 0, 0)
-#define PM8XXX_GPIO_INPUT(_gpio, _pull) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, PM_GPIO_OUT_BUF_CMOS, 0, \
+#define PM8038_GPIO_INPUT(_gpio, _pull) \
+ PM8038_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, PM_GPIO_OUT_BUF_CMOS, 0, \
_pull, PM8038_GPIO_VIN_L11, \
PM_GPIO_STRENGTH_NO, \
PM_GPIO_FUNC_NORMAL, 0, 0)
-#define PM8XXX_GPIO_OUTPUT_FUNC(_gpio, _val, _func) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
+#define PM8038_GPIO_OUTPUT_FUNC(_gpio, _val, _func) \
+ PM8038_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
PM_GPIO_PULL_NO, PM8038_GPIO_VIN_L11, \
PM_GPIO_STRENGTH_HIGH, \
_func, 0, 0)
-#define PM8XXX_GPIO_OUTPUT_VIN(_gpio, _val, _vin) \
- PM8XXX_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
+#define PM8038_GPIO_OUTPUT_VIN(_gpio, _val, _vin) \
+ PM8038_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
PM_GPIO_PULL_NO, _vin, \
PM_GPIO_STRENGTH_HIGH, \
PM_GPIO_FUNC_NORMAL, 0, 0)
-/* Initial pm8038 GPIO configurations */
+#define PM8917_GPIO_INIT(_gpio, _dir, _buf, _val, _pull, _vin, _out_strength, \
+ _func, _inv, _disable) \
+{ \
+ .gpio = PM8917_GPIO_PM_TO_SYS(_gpio), \
+ .config = { \
+ .direction = _dir, \
+ .output_buffer = _buf, \
+ .output_value = _val, \
+ .pull = _pull, \
+ .vin_sel = _vin, \
+ .out_strength = _out_strength, \
+ .function = _func, \
+ .inv_int_pol = _inv, \
+ .disable_pin = _disable, \
+ } \
+}
+
+#define PM8917_MPP_INIT(_mpp, _type, _level, _control) \
+{ \
+ .mpp = PM8917_MPP_PM_TO_SYS(_mpp), \
+ .config = { \
+ .type = PM8XXX_MPP_TYPE_##_type, \
+ .level = _level, \
+ .control = PM8XXX_MPP_##_control, \
+ } \
+}
+
+#define PM8917_GPIO_DISABLE(_gpio) \
+ PM8917_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, 0, 0, 0, PM_GPIO_VIN_S4, \
+ 0, 0, 0, 1)
+
+#define PM8917_GPIO_OUTPUT(_gpio, _val) \
+ PM8917_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
+ PM_GPIO_PULL_NO, PM_GPIO_VIN_S4, \
+ PM_GPIO_STRENGTH_HIGH, \
+ PM_GPIO_FUNC_NORMAL, 0, 0)
+
+#define PM8917_GPIO_INPUT(_gpio, _pull) \
+ PM8917_GPIO_INIT(_gpio, PM_GPIO_DIR_IN, PM_GPIO_OUT_BUF_CMOS, 0, \
+ _pull, PM_GPIO_VIN_S4, \
+ PM_GPIO_STRENGTH_NO, \
+ PM_GPIO_FUNC_NORMAL, 0, 0)
+
+#define PM8917_GPIO_OUTPUT_FUNC(_gpio, _val, _func) \
+ PM8917_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
+ PM_GPIO_PULL_NO, PM_GPIO_VIN_S4, \
+ PM_GPIO_STRENGTH_HIGH, \
+ _func, 0, 0)
+
+#define PM8917_GPIO_OUTPUT_VIN(_gpio, _val, _vin) \
+ PM8917_GPIO_INIT(_gpio, PM_GPIO_DIR_OUT, PM_GPIO_OUT_BUF_CMOS, _val, \
+ PM_GPIO_PULL_NO, _vin, \
+ PM_GPIO_STRENGTH_HIGH, \
+ PM_GPIO_FUNC_NORMAL, 0, 0)
+
+/* GPIO and MPP configurations for MSM8930 + PM8038 targets */
+
+/* Initial PM8038 GPIO configurations */
static struct pm8xxx_gpio_init pm8038_gpios[] __initdata = {
/* keys GPIOs */
- PM8XXX_GPIO_INPUT(3, PM_GPIO_PULL_UP_30),
- PM8XXX_GPIO_INPUT(8, PM_GPIO_PULL_UP_30),
- PM8XXX_GPIO_INPUT(10, PM_GPIO_PULL_UP_30),
- PM8XXX_GPIO_INPUT(11, PM_GPIO_PULL_UP_30),
+ PM8038_GPIO_INPUT(3, PM_GPIO_PULL_UP_30),
+ PM8038_GPIO_INPUT(8, PM_GPIO_PULL_UP_30),
+ PM8038_GPIO_INPUT(10, PM_GPIO_PULL_UP_30),
+ PM8038_GPIO_INPUT(11, PM_GPIO_PULL_UP_30),
/* haptics gpio */
- PM8XXX_GPIO_OUTPUT_FUNC(7, 0, PM_GPIO_FUNC_1),
+ PM8038_GPIO_OUTPUT_FUNC(7, 0, PM_GPIO_FUNC_1),
/* MHL PWR EN */
- PM8XXX_GPIO_OUTPUT_VIN(5, 1, PM_GPIO_VIN_VPH),
+ PM8038_GPIO_OUTPUT_VIN(5, 1, PM8038_GPIO_VIN_VPH),
};
-/* Initial pm8038 MPP configurations */
-static struct pm8xxx_mpp_init pm8038_mpps[] __initdata = {};
+/* Initial PM8038 MPP configurations */
+static struct pm8xxx_mpp_init pm8038_mpps[] __initdata = {
+};
+
+/* GPIO and MPP configurations for MSM8930 + PM8917 targets */
+
+/* Initial PM8917 GPIO configurations */
+static struct pm8xxx_gpio_init pm8917_gpios[] __initdata = {
+ /* keys GPIOs */
+ PM8917_GPIO_INPUT(27, PM_GPIO_PULL_UP_30),
+ PM8917_GPIO_INPUT(28, PM_GPIO_PULL_UP_30),
+ PM8917_GPIO_INPUT(36, PM_GPIO_PULL_UP_30),
+ PM8917_GPIO_INPUT(37, PM_GPIO_PULL_UP_30),
+ /* haptics gpio */
+ PM8917_GPIO_OUTPUT_FUNC(38, 0, PM_GPIO_FUNC_2),
+ /* MHL PWR EN */
+ PM8917_GPIO_OUTPUT_VIN(25, 1, PM_GPIO_VIN_VPH),
+};
+
+/* Initial PM8917 MPP configurations */
+static struct pm8xxx_mpp_init pm8917_mpps[] __initdata = {
+};
void __init msm8930_pm8038_gpio_mpp_init(void)
{
@@ -126,7 +204,31 @@
}
}
-static struct pm8xxx_adc_amux pm8xxx_adc_channels_data[] = {
+void __init msm8930_pm8917_gpio_mpp_init(void)
+{
+ int i, rc;
+
+ for (i = 0; i < ARRAY_SIZE(pm8917_gpios); i++) {
+ rc = pm8xxx_gpio_config(pm8917_gpios[i].gpio,
+ &pm8917_gpios[i].config);
+ if (rc) {
+ pr_err("%s: pm8xxx_gpio_config: rc=%d\n", __func__, rc);
+ break;
+ }
+ }
+
+ /* Initial MPP configuration. */
+ for (i = 0; i < ARRAY_SIZE(pm8917_mpps); i++) {
+ rc = pm8xxx_mpp_config(pm8917_mpps[i].mpp,
+ &pm8917_mpps[i].config);
+ if (rc) {
+ pr_err("%s: pm8xxx_mpp_config: rc=%d\n", __func__, rc);
+ break;
+ }
+ }
+}
+
+static struct pm8xxx_adc_amux pm8038_adc_channels_data[] = {
{"vcoin", CHANNEL_VCOIN, CHAN_PATH_SCALING2, AMUX_RSV1,
ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
{"vbat", CHANNEL_VBAT, CHAN_PATH_SCALING2, AMUX_RSV1,
@@ -161,16 +263,16 @@
ADC_DECIMATION_TYPE2, ADC_SCALE_PA_THERM},
};
-static struct pm8xxx_adc_properties pm8xxx_adc_data = {
+static struct pm8xxx_adc_properties pm8038_adc_data = {
.adc_vdd_reference = 1800, /* milli-voltage for this adc */
.bitresolution = 15,
.bipolar = 0,
};
-static struct pm8xxx_adc_platform_data pm8xxx_adc_pdata = {
- .adc_channel = pm8xxx_adc_channels_data,
- .adc_num_board_channel = ARRAY_SIZE(pm8xxx_adc_channels_data),
- .adc_prop = &pm8xxx_adc_data,
+static struct pm8xxx_adc_platform_data pm8038_adc_pdata = {
+ .adc_channel = pm8038_adc_channels_data,
+ .adc_num_board_channel = ARRAY_SIZE(pm8038_adc_channels_data),
+ .adc_prop = &pm8038_adc_data,
.adc_mpp_base = PM8038_MPP_PM_TO_SYS(1),
};
@@ -228,6 +330,7 @@
.thermal_mitigation = pm8921_therm_mitigation,
.thermal_levels = ARRAY_SIZE(pm8921_therm_mitigation),
.led_src_config = LED_SRC_VPH_PWR,
+ .rconn_mohm = 18,
};
#define PM8038_WLED_MAX_CURRENT 25
@@ -363,6 +466,7 @@
.shutdown_soc_valid_limit = 20,
.adjust_soc_low_threshold = 25,
.chg_term_ua = CHG_TERM_MA * 1000,
+ .rconn_mohm = 18,
};
static struct pm8038_platform_data pm8038_platform_data __devinitdata = {
@@ -375,7 +479,7 @@
.regulator_pdatas = msm8930_pm8038_regulator_pdata,
.charger_pdata = &pm8921_chg_pdata,
.bms_pdata = &pm8921_bms_pdata,
- .adc_pdata = &pm8xxx_adc_pdata,
+ .adc_pdata = &pm8038_adc_pdata,
.leds_pdata = &pm8xxx_leds_pdata,
.ccadc_pdata = &pm8xxx_ccadc_pdata,
.spk_pdata = &pm8xxx_spk_pdata,
@@ -389,15 +493,99 @@
},
};
+/* PM8917 platform data */
+
+static struct pm8xxx_adc_amux pm8917_adc_channels_data[] = {
+ {"vcoin", CHANNEL_VCOIN, CHAN_PATH_SCALING2, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"vbat", CHANNEL_VBAT, CHAN_PATH_SCALING2, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"dcin", CHANNEL_DCIN, CHAN_PATH_SCALING4, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"ichg", CHANNEL_ICHG, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"vph_pwr", CHANNEL_VPH_PWR, CHAN_PATH_SCALING2, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"ibat", CHANNEL_IBAT, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"batt_therm", CHANNEL_BATT_THERM, CHAN_PATH_SCALING1, AMUX_RSV2,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_BATT_THERM},
+ {"batt_id", CHANNEL_BATT_ID, CHAN_PATH_SCALING1, AMUX_RSV2,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"usbin", CHANNEL_USBIN, CHAN_PATH_SCALING3, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"pmic_therm", CHANNEL_DIE_TEMP, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_PMIC_THERM},
+ {"625mv", CHANNEL_625MV, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"125v", CHANNEL_125V, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"chg_temp", CHANNEL_CHG_TEMP, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_DEFAULT},
+ {"xo_therm", CHANNEL_MUXOFF, CHAN_PATH_SCALING1, AMUX_RSV0,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_XOTHERM},
+ {"pa_therm0", ADC_MPP_1_AMUX3, CHAN_PATH_SCALING1, AMUX_RSV1,
+ ADC_DECIMATION_TYPE2, ADC_SCALE_PA_THERM},
+};
+
+static struct pm8xxx_adc_properties pm8917_adc_data = {
+ .adc_vdd_reference = 1800, /* milli-voltage for this adc */
+ .bitresolution = 15,
+ .bipolar = 0,
+};
+
+static struct pm8xxx_adc_platform_data pm8917_adc_pdata = {
+ .adc_channel = pm8917_adc_channels_data,
+ .adc_num_board_channel = ARRAY_SIZE(pm8917_adc_channels_data),
+ .adc_prop = &pm8917_adc_data,
+ .adc_mpp_base = PM8917_MPP_PM_TO_SYS(1),
+};
+
+static struct pm8921_platform_data pm8917_platform_data __devinitdata = {
+ .irq_pdata = &pm8xxx_irq_pdata,
+ .gpio_pdata = &pm8xxx_gpio_pdata,
+ .mpp_pdata = &pm8xxx_mpp_pdata,
+ .rtc_pdata = &pm8xxx_rtc_pdata,
+ .pwrkey_pdata = &pm8xxx_pwrkey_pdata,
+ .misc_pdata = &pm8xxx_misc_pdata,
+ .regulator_pdatas = msm8930_pm8038_regulator_pdata,
+ .charger_pdata = &pm8921_chg_pdata,
+ .bms_pdata = &pm8921_bms_pdata,
+ .adc_pdata = &pm8917_adc_pdata,
+ .ccadc_pdata = &pm8xxx_ccadc_pdata,
+};
+
+static struct msm_ssbi_platform_data msm8930_ssbi_pm8917_pdata __devinitdata = {
+ .controller_type = MSM_SBI_CTRL_PMIC_ARBITER,
+ .slave = {
+ .name = "pm8921-core",
+ .platform_data = &pm8917_platform_data,
+ },
+};
+
void __init msm8930_init_pmic(void)
{
- pmic_reset_irq = PM8038_IRQ_BASE + PM8038_RESOUT_IRQ;
- msm8960_device_ssbi_pmic.dev.platform_data =
- &msm8930_ssbi_pm8038_pdata;
- pm8038_platform_data.num_regulators
- = msm8930_pm8038_regulator_pdata_len;
- if (machine_is_apq8064_mtp())
- pm8921_bms_pdata.battery_type = BATT_PALLADIUM;
- else if (machine_is_apq8064_liquid())
- pm8921_bms_pdata.battery_type = BATT_DESAY;
+ if (socinfo_get_pmic_model() != PMIC_MODEL_PM8917) {
+ /* PM8038 configuration */
+ pmic_reset_irq = PM8038_IRQ_BASE + PM8038_RESOUT_IRQ;
+ msm8960_device_ssbi_pmic.dev.platform_data =
+ &msm8930_ssbi_pm8038_pdata;
+ pm8038_platform_data.num_regulators
+ = msm8930_pm8038_regulator_pdata_len;
+ if (machine_is_apq8064_mtp())
+ pm8921_bms_pdata.battery_type = BATT_PALLADIUM;
+ else if (machine_is_apq8064_liquid())
+ pm8921_bms_pdata.battery_type = BATT_DESAY;
+ } else {
+ /* PM8917 configuration */
+ pmic_reset_irq = PM8917_IRQ_BASE + PM8921_RESOUT_IRQ;
+ msm8960_device_ssbi_pmic.dev.platform_data =
+ &msm8930_ssbi_pm8917_pdata;
+ pm8038_platform_data.num_regulators
+ = msm8930_pm8038_regulator_pdata_len;
+ if (machine_is_apq8064_mtp())
+ pm8921_bms_pdata.battery_type = BATT_PALLADIUM;
+ else if (machine_is_apq8064_liquid())
+ pm8921_bms_pdata.battery_type = BATT_DESAY;
+ }
}
diff --git a/arch/arm/mach-msm/board-8930.c b/arch/arm/mach-msm/board-8930.c
index d065d90..889f6f1 100644
--- a/arch/arm/mach-msm/board-8930.c
+++ b/arch/arm/mach-msm/board-8930.c
@@ -1674,18 +1674,26 @@
#define ISA1200_HAP_EN_GPIO 77
#define ISA1200_HAP_LEN_GPIO 78
-#define ISA1200_HAP_CLK PM8038_GPIO_PM_TO_SYS(7)
+#define ISA1200_HAP_CLK_PM8038 PM8038_GPIO_PM_TO_SYS(7)
+#define ISA1200_HAP_CLK_PM8917 PM8917_GPIO_PM_TO_SYS(38)
static int isa1200_power(int on)
{
+ unsigned int gpio = ISA1200_HAP_CLK_PM8038;
+ enum pm8xxx_aux_clk_id clk_id = CLK_MP3_1;
int rc = 0;
- gpio_set_value_cansleep(ISA1200_HAP_CLK, !!on);
+ if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) {
+ gpio = ISA1200_HAP_CLK_PM8917;
+ clk_id = CLK_MP3_2;
+ }
+
+ gpio_set_value_cansleep(gpio, !!on);
if (on)
- rc = pm8xxx_aux_clk_control(CLK_MP3_1, XO_DIV_1, true);
+ rc = pm8xxx_aux_clk_control(clk_id, XO_DIV_1, true);
else
- rc = pm8xxx_aux_clk_control(CLK_MP3_1, XO_DIV_NONE, true);
+ rc = pm8xxx_aux_clk_control(clk_id, XO_DIV_NONE, true);
if (rc) {
pr_err("%s: unable to write aux clock register(%d)\n",
@@ -1697,29 +1705,33 @@
static int isa1200_dev_setup(bool enable)
{
+ unsigned int gpio = ISA1200_HAP_CLK_PM8038;
int rc = 0;
+ if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917)
+ gpio = ISA1200_HAP_CLK_PM8917;
+
if (!enable)
goto fail_gpio_dir;
- rc = gpio_request(ISA1200_HAP_CLK, "haptics_clk");
+ rc = gpio_request(gpio, "haptics_clk");
if (rc) {
pr_err("%s: gpio_request for %d gpio failed rc(%d)\n",
- __func__, ISA1200_HAP_CLK, rc);
+ __func__, gpio, rc);
goto fail_gpio_req;
}
- rc = gpio_direction_output(ISA1200_HAP_CLK, 0);
+ rc = gpio_direction_output(gpio, 0);
if (rc) {
pr_err("%s: gpio_direction_output failed for %d gpio rc(%d)\n",
- __func__, ISA1200_HAP_CLK, rc);
+ __func__, gpio, rc);
goto fail_gpio_dir;
}
return 0;
fail_gpio_dir:
- gpio_free(ISA1200_HAP_CLK);
+ gpio_free(gpio);
fail_gpio_req:
return rc;
@@ -1956,12 +1968,13 @@
},
};
-#define MHL_POWER_GPIO PM8038_GPIO_PM_TO_SYS(MHL_GPIO_PWR_EN)
+#define MHL_POWER_GPIO_PM8038 PM8038_GPIO_PM_TO_SYS(MHL_GPIO_PWR_EN)
+#define MHL_POWER_GPIO_PM8917 PM8917_GPIO_PM_TO_SYS(25)
static struct msm_mhl_platform_data mhl_platform_data = {
.irq = MSM_GPIO_TO_INT(MHL_GPIO_INT),
.gpio_mhl_int = MHL_GPIO_INT,
.gpio_mhl_reset = MHL_GPIO_RESET,
- .gpio_mhl_power = MHL_POWER_GPIO,
+ .gpio_mhl_power = MHL_POWER_GPIO_PM8038,
.gpio_hdmi_mhl_mux = HDMI_MHL_MUX_GPIO,
};
@@ -1980,17 +1993,22 @@
#ifdef MSM8930_PHASE_2
-#define GPIO_VOLUME_UP PM8038_GPIO_PM_TO_SYS(3)
-#define GPIO_VOLUME_DOWN PM8038_GPIO_PM_TO_SYS(8)
-#define GPIO_CAMERA_SNAPSHOT PM8038_GPIO_PM_TO_SYS(10)
-#define GPIO_CAMERA_FOCUS PM8038_GPIO_PM_TO_SYS(11)
+#define GPIO_VOLUME_UP_PM8038 PM8038_GPIO_PM_TO_SYS(3)
+#define GPIO_VOLUME_DOWN_PM8038 PM8038_GPIO_PM_TO_SYS(8)
+#define GPIO_CAMERA_SNAPSHOT_PM8038 PM8038_GPIO_PM_TO_SYS(10)
+#define GPIO_CAMERA_FOCUS_PM8038 PM8038_GPIO_PM_TO_SYS(11)
-static struct gpio_keys_button keys_8930[] = {
+#define GPIO_VOLUME_UP_PM8917 PM8917_GPIO_PM_TO_SYS(27)
+#define GPIO_VOLUME_DOWN_PM8917 PM8917_GPIO_PM_TO_SYS(28)
+#define GPIO_CAMERA_SNAPSHOT_PM8917 PM8917_GPIO_PM_TO_SYS(36)
+#define GPIO_CAMERA_FOCUS_PM8917 PM8917_GPIO_PM_TO_SYS(37)
+
+static struct gpio_keys_button keys_8930_pm8038[] = {
{
.code = KEY_VOLUMEUP,
.type = EV_KEY,
.desc = "volume_up",
- .gpio = GPIO_VOLUME_UP,
+ .gpio = GPIO_VOLUME_UP_PM8038,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
@@ -1999,7 +2017,7 @@
.code = KEY_VOLUMEDOWN,
.type = EV_KEY,
.desc = "volume_down",
- .gpio = GPIO_VOLUME_DOWN,
+ .gpio = GPIO_VOLUME_DOWN_PM8038,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
@@ -2008,7 +2026,7 @@
.code = KEY_CAMERA_FOCUS,
.type = EV_KEY,
.desc = "camera_focus",
- .gpio = GPIO_CAMERA_FOCUS,
+ .gpio = GPIO_CAMERA_FOCUS_PM8038,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
@@ -2017,7 +2035,46 @@
.code = KEY_CAMERA_SNAPSHOT,
.type = EV_KEY,
.desc = "camera_snapshot",
- .gpio = GPIO_CAMERA_SNAPSHOT,
+ .gpio = GPIO_CAMERA_SNAPSHOT_PM8038,
+ .wakeup = 1,
+ .active_low = 1,
+ .debounce_interval = 15,
+ },
+};
+
+static struct gpio_keys_button keys_8930_pm8917[] = {
+ {
+ .code = KEY_VOLUMEUP,
+ .type = EV_KEY,
+ .desc = "volume_up",
+ .gpio = GPIO_VOLUME_UP_PM8917,
+ .wakeup = 1,
+ .active_low = 1,
+ .debounce_interval = 15,
+ },
+ {
+ .code = KEY_VOLUMEDOWN,
+ .type = EV_KEY,
+ .desc = "volume_down",
+ .gpio = GPIO_VOLUME_DOWN_PM8917,
+ .wakeup = 1,
+ .active_low = 1,
+ .debounce_interval = 15,
+ },
+ {
+ .code = KEY_CAMERA_FOCUS,
+ .type = EV_KEY,
+ .desc = "camera_focus",
+ .gpio = GPIO_CAMERA_FOCUS_PM8917,
+ .wakeup = 1,
+ .active_low = 1,
+ .debounce_interval = 15,
+ },
+ {
+ .code = KEY_CAMERA_SNAPSHOT,
+ .type = EV_KEY,
+ .desc = "camera_snapshot",
+ .gpio = GPIO_CAMERA_SNAPSHOT_PM8917,
.wakeup = 1,
.active_low = 1,
.debounce_interval = 15,
@@ -2026,8 +2083,8 @@
/* Add GPIO keys for 8930 */
static struct gpio_keys_platform_data gpio_keys_8930_pdata = {
- .buttons = keys_8930,
- .nbuttons = 4,
+ .buttons = keys_8930_pm8038,
+ .nbuttons = ARRAY_SIZE(keys_8930_pm8038),
};
static struct platform_device gpio_keys_8930 = {
@@ -2586,8 +2643,19 @@
#endif
}
+/* Modify platform data values to match requirements for PM8917. */
+static void __init msm8930_pm8917_pdata_fixup(void)
+{
+ mhl_platform_data.gpio_mhl_power = MHL_POWER_GPIO_PM8917;
+
+ gpio_keys_8930_pdata.buttons = keys_8930_pm8917;
+ gpio_keys_8930_pdata.nbuttons = ARRAY_SIZE(keys_8930_pm8917);
+}
+
static void __init msm8930_cdp_init(void)
{
+ if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917)
+ msm8930_pm8917_pdata_fixup();
if (meminfo_init(SYS_MEMORY, SZ_256M) < 0)
pr_err("meminfo_init() failed!\n");
@@ -2648,7 +2716,10 @@
#ifndef MSM8930_PHASE_2
msm8960_pm8921_gpio_mpp_init();
#else
- msm8930_pm8038_gpio_mpp_init();
+ if (socinfo_get_pmic_model() != PMIC_MODEL_PM8917)
+ msm8930_pm8038_gpio_mpp_init();
+ else
+ msm8930_pm8917_gpio_mpp_init();
#endif
platform_add_devices(cdp_devices, ARRAY_SIZE(cdp_devices));
#ifdef CONFIG_MSM_CAMERA
diff --git a/arch/arm/mach-msm/board-8930.h b/arch/arm/mach-msm/board-8930.h
index daded29..20937e3 100644
--- a/arch/arm/mach-msm/board-8930.h
+++ b/arch/arm/mach-msm/board-8930.h
@@ -138,6 +138,7 @@
int msm8930_init_gpiomux(void);
void msm8930_allocate_fb_region(void);
void msm8930_pm8038_gpio_mpp_init(void);
+void msm8930_pm8917_gpio_mpp_init(void);
void msm8930_mdp_writeback(struct memtype_reserve *reserve_table);
void __init msm8930_init_gpu(void);