mac80211: use nl80211 interface types
There's really no reason for mac80211 to be using its
own interface type defines. Use the nl80211 types and
simplify the configuration code a bit: there's no need
to translate them any more now.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c
index 5a896d1..c77cee2 100644
--- a/drivers/net/wireless/ath5k/pcu.c
+++ b/drivers/net/wireless/ath5k/pcu.c
@@ -52,26 +52,26 @@
ATH5K_TRACE(ah->ah_sc);
switch (ah->ah_op_mode) {
- case IEEE80211_IF_TYPE_IBSS:
+ case NL80211_IFTYPE_ADHOC:
pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA |
(ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_NO_PSPOLL : 0);
beacon_reg |= AR5K_BCR_ADHOC;
break;
- case IEEE80211_IF_TYPE_AP:
- case IEEE80211_IF_TYPE_MESH_POINT:
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
(ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_NO_PSPOLL : 0);
beacon_reg |= AR5K_BCR_AP;
break;
- case IEEE80211_IF_TYPE_STA:
+ case NL80211_IFTYPE_STATION:
pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
(ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_PWR_SV : 0);
- case IEEE80211_IF_TYPE_MNTR:
+ case NL80211_IFTYPE_MONITOR:
pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
(ah->ah_version == AR5K_AR5210 ?
AR5K_STA_ID1_NO_PSPOLL : 0);
@@ -649,7 +649,7 @@
* Set the additional timers by mode
*/
switch (ah->ah_op_mode) {
- case IEEE80211_IF_TYPE_STA:
+ case NL80211_IFTYPE_STATION:
if (ah->ah_version == AR5K_AR5210) {
timer1 = 0xffffffff;
timer2 = 0xffffffff;