[POWERPC] mpc5200 device tree bindings refinement
Much needed refinement of mpc5200 device tree binding specifications.
Short list:
- drop mpc52xx designator; only two supported chips exist, 5200 and 5200b.
It's premature to refer to them as '52xx'.
- Specify optional 'model' and 'revision' properties in the soc5200 node
- Specify reqiured 'cell-index' property to identify between multiple SOC
devices of the same type. (Useful for arbitrating shared register access)
- Specify optional 'port-number' property for adjusting the logical serial
port assignments.
- Specify optional 'has-wdt' property for gpt0 node.
- Add system-frequency property to soc5200 node
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 1868707..c03103c 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -1,7 +1,7 @@
/*
* Lite5200 board Device Tree Source
*
- * Copyright 2006 Secret Lab Technologies Ltd.
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
*
* This program is free software; you can redistribute it and/or modify it
@@ -17,8 +17,9 @@
*/
/ {
- model = "Lite5200";
- compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx";
+ model = "fsl,lite5200";
+ // revision = "1.0";
+ compatible = "fsl,lite5200\0generic-mpc5200";
#address-cells = <1>;
#size-cells = <1>;
@@ -47,14 +48,17 @@
};
soc5200@f0000000 {
+ model = "fsl,mpc5200";
+ revision = "" // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
ranges = <0 f0000000 f0010000>;
reg = <f0000000 00010000>;
bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
cdm@200 {
- compatible = "mpc5200-cdm\0mpc52xx-cdm";
+ compatible = "mpc5200-cdm";
reg = <200 38>;
};
@@ -64,77 +68,86 @@
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
- compatible = "mpc5200-pic\0mpc52xx-pic";
+ compatible = "mpc5200-pic";
reg = <500 80>;
built-in;
};
gpt@600 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <0>;
reg = <600 10>;
interrupts = <1 9 0>;
interrupt-parent = <500>;
+ has-wdt;
};
gpt@610 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <1>;
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <500>;
};
gpt@620 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <2>;
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <500>;
};
gpt@630 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <3>;
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <500>;
};
gpt@640 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <4>;
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <500>;
};
gpt@650 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <5>;
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <500>;
};
gpt@660 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <6>;
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <500>;
};
gpt@670 { // General Purpose Timer
- compatible = "mpc5200-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200-gpt";
device_type = "gpt";
+ cell-index = <7>;
reg = <670 10>;
interrupts = <1 10 0>;
interrupt-parent = <500>;
};
rtc@800 { // Real time clock
- compatible = "mpc5200-rtc\0mpc52xx-rtc";
+ compatible = "mpc5200-rtc";
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
@@ -143,7 +156,8 @@
mscan@900 {
device_type = "mscan";
- compatible = "mpc5200-mscan\0mpc52xx-mscan";
+ compatible = "mpc5200-mscan";
+ cell-index = <0>;
interrupts = <2 11 0>;
interrupt-parent = <500>;
reg = <900 80>;
@@ -151,21 +165,22 @@
mscan@980 {
device_type = "mscan";
- compatible = "mpc5200-mscan\0mpc52xx-mscan";
+ compatible = "mpc5200-mscan";
+ cell-index = <1>;
interrupts = <1 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
gpio@b00 {
- compatible = "mpc5200-gpio\0mpc52xx-gpio";
+ compatible = "mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <500>;
};
gpio-wkup@b00 {
- compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup";
+ compatible = "mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <500>;
@@ -176,7 +191,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- compatible = "mpc5200-pci\0mpc52xx-pci";
+ compatible = "mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 500 0 0 3
@@ -194,7 +209,7 @@
spi@f00 {
device_type = "spi";
- compatible = "mpc5200-spi\0mpc52xx-spi";
+ compatible = "mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <500>;
@@ -202,7 +217,7 @@
usb@1000 {
device_type = "usb-ohci-be";
- compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be";
+ compatible = "mpc5200-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <500>;
@@ -210,7 +225,7 @@
bestcomm@1200 {
device_type = "dma-controller";
- compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm";
+ compatible = "mpc5200-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
@@ -220,67 +235,73 @@
};
xlb@1f00 {
- compatible = "mpc5200-xlb\0mpc52xx-xlb";
+ compatible = "mpc5200-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
- compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+ compatible = "mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
+ cell-index = <0>;
reg = <2000 100>;
interrupts = <2 1 0>;
interrupt-parent = <500>;
};
- // PSC2 in spi mode example
- spi@2200 { // PSC2
- device_type = "spi";
- compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi";
- reg = <2200 100>;
- interrupts = <2 2 0>;
- interrupt-parent = <500>;
- };
+ // PSC2 in ac97 mode example
+ //ac97@2200 { // PSC2
+ // device_type = "sound";
+ // compatible = "mpc5200-psc-ac97";
+ // cell-index = <1>;
+ // reg = <2200 100>;
+ // interrupts = <2 2 0>;
+ // interrupt-parent = <500>;
+ //};
// PSC3 in CODEC mode example
- i2s@2400 { // PSC3
- device_type = "sound";
- compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s";
- reg = <2400 100>;
- interrupts = <2 3 0>;
- interrupt-parent = <500>;
- };
+ //i2s@2400 { // PSC3
+ // device_type = "sound";
+ // compatible = "mpc5200-psc-i2s";
+ // cell-index = <2>;
+ // reg = <2400 100>;
+ // interrupts = <2 3 0>;
+ // interrupt-parent = <500>;
+ //};
- // PSC4 unconfigured
+ // PSC4 in uart mode example
//serial@2600 { // PSC4
// device_type = "serial";
- // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+ // compatible = "mpc5200-psc-uart";
+ // cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
// interrupt-parent = <500>;
//};
- // PSC5 unconfigured
+ // PSC5 in uart mode example
//serial@2800 { // PSC5
// device_type = "serial";
- // compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+ // compatible = "mpc5200-psc-uart";
+ // cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
// interrupt-parent = <500>;
//};
- // PSC6 in AC97 mode example
- ac97@2c00 { // PSC6
- device_type = "sound";
- compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97";
- reg = <2c00 100>;
- interrupts = <2 4 0>;
- interrupt-parent = <500>;
- };
+ // PSC6 in spi mode example
+ //spi@2c00 { // PSC6
+ // device_type = "spi";
+ // compatible = "mpc5200-psc-spi";
+ // cell-index = <5>;
+ // reg = <2c00 100>;
+ // interrupts = <2 4 0>;
+ // interrupt-parent = <500>;
+ //};
ethernet@3000 {
device_type = "network";
- compatible = "mpc5200-fec\0mpc52xx-fec";
+ compatible = "mpc5200-fec";
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
@@ -289,7 +310,7 @@
ata@3a00 {
device_type = "ata";
- compatible = "mpc5200-ata\0mpc52xx-ata";
+ compatible = "mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <500>;
@@ -297,7 +318,8 @@
i2c@3d00 {
device_type = "i2c";
- compatible = "mpc5200-i2c\0mpc52xx-i2c";
+ compatible = "mpc5200-i2c";
+ cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
@@ -305,14 +327,15 @@
i2c@3d40 {
device_type = "i2c";
- compatible = "mpc5200-i2c\0mpc52xx-i2c";
+ compatible = "mpc5200-i2c";
+ cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
};
sram@8000 {
device_type = "sram";
- compatible = "mpc5200-sram\0mpc52xx-sram\0sram";
+ compatible = "mpc5200-sram\0sram";
reg = <8000 4000>;
};
};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 5bb2760..3875ca9 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -1,7 +1,7 @@
/*
* Lite5200B board Device Tree Source
*
- * Copyright 2006 Secret Lab Technologies Ltd.
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
*
* This program is free software; you can redistribute it and/or modify it
@@ -17,8 +17,9 @@
*/
/ {
- model = "Lite5200b";
- compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx";
+ model = "fsl,lite5200b";
+ // revision = "1.0";
+ compatible = "fsl,lite5200b\0generic-mpc5200";
#address-cells = <1>;
#size-cells = <1>;
@@ -47,14 +48,17 @@
};
soc5200@f0000000 {
+ model = "fsl,mpc5200b";
+ revision = ""; // from bootloader
#interrupt-cells = <3>;
device_type = "soc";
ranges = <0 f0000000 f0010000>;
reg = <f0000000 00010000>;
bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
cdm@200 {
- compatible = "mpc5200b-cdm\0mpc52xx-cdm";
+ compatible = "mpc5200b-cdm\0mpc5200-cdm";
reg = <200 38>;
};
@@ -64,77 +68,86 @@
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
- compatible = "mpc5200b-pic\0mpc52xx-pic";
+ compatible = "mpc5200b-pic\0mpc5200-pic";
reg = <500 80>;
built-in;
};
gpt@600 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <0>;
reg = <600 10>;
interrupts = <1 9 0>;
interrupt-parent = <500>;
+ has-wdt;
};
gpt@610 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <1>;
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <500>;
};
gpt@620 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <2>;
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <500>;
};
gpt@630 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <3>;
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <500>;
};
gpt@640 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <4>;
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <500>;
};
gpt@650 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <5>;
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <500>;
};
gpt@660 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <6>;
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <500>;
};
gpt@670 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
device_type = "gpt";
+ cell-index = <7>;
reg = <670 10>;
interrupts = <1 10 0>;
interrupt-parent = <500>;
};
rtc@800 { // Real time clock
- compatible = "mpc5200b-rtc\0mpc52xx-rtc";
+ compatible = "mpc5200b-rtc\0mpc5200-rtc";
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
@@ -143,7 +156,8 @@
mscan@900 {
device_type = "mscan";
- compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+ compatible = "mpc5200b-mscan\0mpc5200-mscan";
+ cell-index = <0>;
interrupts = <2 11 0>;
interrupt-parent = <500>;
reg = <900 80>;
@@ -151,21 +165,22 @@
mscan@980 {
device_type = "mscan";
- compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+ compatible = "mpc5200b-mscan\0mpc5200-mscan";
+ cell-index = <1>;
interrupts = <1 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
gpio@b00 {
- compatible = "mpc5200b-gpio\0mpc52xx-gpio";
+ compatible = "mpc5200b-gpio\0mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <500>;
};
gpio-wkup@b00 {
- compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup";
+ compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <500>;
@@ -176,7 +191,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- compatible = "mpc5200b-pci\0mpc52xx-pci";
+ compatible = "mpc5200b-pci\0mpc5200-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot
@@ -199,7 +214,7 @@
spi@f00 {
device_type = "spi";
- compatible = "mpc5200b-spi\0mpc52xx-spi";
+ compatible = "mpc5200b-spi\0mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <500>;
@@ -207,7 +222,7 @@
usb@1000 {
device_type = "usb-ohci-be";
- compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be";
+ compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <500>;
@@ -215,7 +230,7 @@
bestcomm@1200 {
device_type = "dma-controller";
- compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm";
+ compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
@@ -225,67 +240,73 @@
};
xlb@1f00 {
- compatible = "mpc5200b-xlb\0mpc52xx-xlb";
+ compatible = "mpc5200b-xlb\0mpc5200-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
- compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+ compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
+ cell-index = <0>;
reg = <2000 100>;
interrupts = <2 1 0>;
interrupt-parent = <500>;
};
- // PSC2 in spi mode example
- spi@2200 { // PSC2
- device_type = "spi";
- compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi";
- reg = <2200 100>;
- interrupts = <2 2 0>;
- interrupt-parent = <500>;
- };
+ // PSC2 in ac97 mode example
+ //ac97@2200 { // PSC2
+ // device_type = "sound";
+ // compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97";
+ // cell-index = <1>;
+ // reg = <2200 100>;
+ // interrupts = <2 2 0>;
+ // interrupt-parent = <500>;
+ //};
// PSC3 in CODEC mode example
- i2s@2400 { // PSC3
- device_type = "sound";
- compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s";
- reg = <2400 100>;
- interrupts = <2 3 0>;
- interrupt-parent = <500>;
- };
+ //i2s@2400 { // PSC3
+ // device_type = "sound";
+ // compatible = "mpc5200b-psc-i2s"; //not 5200 compatible
+ // cell-index = <2>;
+ // reg = <2400 100>;
+ // interrupts = <2 3 0>;
+ // interrupt-parent = <500>;
+ //};
- // PSC4 unconfigured
+ // PSC4 in uart mode example
//serial@2600 { // PSC4
// device_type = "serial";
- // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+ // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ // cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
// interrupt-parent = <500>;
//};
- // PSC5 unconfigured
+ // PSC5 in uart mode example
//serial@2800 { // PSC5
// device_type = "serial";
- // compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+ // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ // cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
// interrupt-parent = <500>;
//};
- // PSC6 in AC97 mode example
- ac97@2c00 { // PSC6
- device_type = "sound";
- compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97";
- reg = <2c00 100>;
- interrupts = <2 4 0>;
- interrupt-parent = <500>;
- };
+ // PSC6 in spi mode example
+ //spi@2c00 { // PSC6
+ // device_type = "spi";
+ // compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi";
+ // cell-index = <5>;
+ // reg = <2c00 100>;
+ // interrupts = <2 4 0>;
+ // interrupt-parent = <500>;
+ //};
ethernet@3000 {
device_type = "network";
- compatible = "mpc5200b-fec\0mpc52xx-fec";
+ compatible = "mpc5200b-fec\0mpc5200-fec";
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
@@ -294,7 +315,7 @@
ata@3a00 {
device_type = "ata";
- compatible = "mpc5200b-ata\0mpc52xx-ata";
+ compatible = "mpc5200b-ata\0mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <500>;
@@ -302,7 +323,8 @@
i2c@3d00 {
device_type = "i2c";
- compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c";
+ cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
@@ -310,14 +332,15 @@
i2c@3d40 {
device_type = "i2c";
- compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c";
+ cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
};
sram@8000 {
device_type = "sram";
- compatible = "mpc5200b-sram\0mpc52xx-sram\0sram";
+ compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
reg = <8000 4000>;
};
};