arch/mips/txx9/rbtx4938/setup.c - android_kernel_htc_msm8960 - Gitiles

 /*
  * Setup pointers to hardware-dependent routines.
  * Copyright (C) 2000-2001 Toshiba Corporation
  *
  * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
  * terms of the GNU General Public License version 2. This program is
  * licensed "as is" without any warranty of any kind, whether express
  * or implied.
  *
  * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
  */
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/mtd/physmap.h>

 #include <asm/reboot.h>
 #include <asm/io.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/rbtx4938.h>
 #include <linux/spi/spi.h>
 #include <asm/txx9/spi.h>
 #include <asm/txx9pio.h>

 static void rbtx4938_machine_restart(char *command)
 {
 	local_irq_disable();
 	writeb(1, rbtx4938_softresetlock_addr);
 	writeb(1, rbtx4938_sfvol_addr);
 	writeb(1, rbtx4938_softreset_addr);
 	/* fallback */
 	(*_machine_halt)();
 }

 static void __init rbtx4938_pci_setup(void)
 {
 #ifdef CONFIG_PCI
 	int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
 	struct pci_controller *c = &txx9_primary_pcic;

 	register_pci_controller(c);

 	if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
 		txx9_pci_option =
 			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
 			TXX9_PCI_OPT_CLK_66; /* already configured */

 	/* Reset PCI Bus */
 	writeb(0, rbtx4938_pcireset_addr);
 	/* Reset PCIC */
 	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
 	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
 	    TXX9_PCI_OPT_CLK_66)
 		tx4938_pciclk66_setup();
 	mdelay(10);
 	/* clear PCIC reset */
 	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
 	writeb(1, rbtx4938_pcireset_addr);
 	iob();

 	tx4938_report_pciclk();
 	tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
 	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
 	    TXX9_PCI_OPT_CLK_AUTO &&
 	    txx9_pci66_check(c, 0, 0)) {
 		/* Reset PCI Bus */
 		writeb(0, rbtx4938_pcireset_addr);
 		/* Reset PCIC */
 		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
 		tx4938_pciclk66_setup();
 		mdelay(10);
 		/* clear PCIC reset */
 		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
 		writeb(1, rbtx4938_pcireset_addr);
 		iob();
 		/* Reinitialize PCIC */
 		tx4938_report_pciclk();
 		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
 	}

 	if (__raw_readq(&tx4938_ccfgptr->pcfg) &
 	    (TX4938_PCFG_ETH0_SEL|TX4938_PCFG_ETH1_SEL)) {
 		/* Reset PCIC1 */
 		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
 		/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
 		if (!(__raw_readq(&tx4938_ccfgptr->ccfg)
 		      & TX4938_CCFG_PCI1DMD))
 			tx4938_ccfg_set(TX4938_CCFG_PCI1_66);
 		mdelay(10);
 		/* clear PCIC1 reset */
 		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
 		tx4938_report_pci1clk();

 		/* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */
 		c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000);
 		register_pci_controller(c);
 		tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
 	}
 	tx4938_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }

 /* SPI support */

 /* chip select for SPI devices */
 #define	SEEPROM1_CS	7	/* PIO7 */
 #define	SEEPROM2_CS	0	/* IOC */
 #define	SEEPROM3_CS	1	/* IOC */
 #define	SRTC_CS	2	/* IOC */
 #define SPI_BUSNO	0

 static int __init rbtx4938_ethaddr_init(void)
 {
 #ifdef CONFIG_PCI
 	unsigned char dat[17];
 	unsigned char sum;
 	int i;

 	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
 	if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) {
 		printk(KERN_ERR "seeprom: read error.\n");
 		return -ENODEV;
 	} else {
 		if (strcmp(dat, "MAC") != 0)
 			printk(KERN_WARNING "seeprom: bad signature.\n");
 		for (i = 0, sum = 0; i < sizeof(dat); i++)
 			sum += dat[i];
 		if (sum)
 			printk(KERN_WARNING "seeprom: bad checksum.\n");
 	}
 	tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
 #endif /* CONFIG_PCI */
 	return 0;
 }

 static void __init rbtx4938_spi_setup(void)
 {
 	/* set SPI_SEL */
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL);
 }

 static struct resource rbtx4938_fpga_resource;

 static void __init rbtx4938_time_init(void)
 {
 	tx4938_time_init(0);
 }

 static void __init rbtx4938_mem_setup(void)
 {
 	unsigned long long pcfg;

 	if (txx9_master_clock == 0)
 		txx9_master_clock = 25000000; /* 25MHz */

 	tx4938_setup();

 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
 	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(RBTX4938_ETHER_BASE);
 #endif

 	tx4938_sio_init(7372800, 0);

 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
 	pr_info("PIOSEL: disabling both ATA and NAND selection\n");
 	txx9_clear64(&tx4938_ccfgptr->pcfg,
 		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif

 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
 	pr_info("PIOSEL: enabling NAND selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif

 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
 	pr_info("PIOSEL: enabling ATA selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif

 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP
 	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
 	pr_info("PIOSEL: NAND %s, ATA %s\n",
 		(pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled",
 		(pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled");
 #endif

 	rbtx4938_spi_setup();
 	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
 	/* fixup piosel */
 	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
 	    TX4938_PCFG_ATA_SEL)
 		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04,
 		       rbtx4938_piosel_addr);
 	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
 		 TX4938_PCFG_NDF_SEL)
 		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08,
 		       rbtx4938_piosel_addr);
 	else
 		writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04),
 		       rbtx4938_piosel_addr);

 	rbtx4938_fpga_resource.name = "FPGA Registers";
 	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
 	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
 	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
 		printk(KERN_ERR "request resource for fpga failed\n");

 	_machine_restart = rbtx4938_machine_restart;

 	writeb(0xff, rbtx4938_led_addr);
 	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
 	       readb(rbtx4938_fpga_rev_addr),
 	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
 }

 static void __init rbtx4938_ne_init(void)
 {
 	struct resource res[] = {
 		{
 			.start	= RBTX4938_RTL_8019_BASE,
 			.end	= RBTX4938_RTL_8019_BASE + 0x20 - 1,
 			.flags	= IORESOURCE_IO,
 		}, {
 			.start	= RBTX4938_RTL_8019_IRQ,
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
 	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }

 static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);

 static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
 				  int value)
 {
 	u8 val;
 	unsigned long flags;
 	spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
 	val = readb(rbtx4938_spics_addr);
 	if (value)
 		val |= 1 << offset;
 	else
 		val &= ~(1 << offset);
 	writeb(val, rbtx4938_spics_addr);
 	mmiowb();
 	spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
 }

 static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
 				     unsigned int offset, int value)
 {
 	rbtx4938_spi_gpio_set(chip, offset, value);
 	return 0;
 }

 static struct gpio_chip rbtx4938_spi_gpio_chip = {
 	.set = rbtx4938_spi_gpio_set,
 	.direction_output = rbtx4938_spi_gpio_dir_out,
 	.label = "RBTX4938-SPICS",
 	.base = 16,
 	.ngpio = 3,
 };

 static int __init rbtx4938_spi_init(void)
 {
 	struct spi_board_info srtc_info = {
 		.modalias = "rtc-rs5c348",
 		.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
 		.bus_num = 0,
 		.chip_select = 16 + SRTC_CS,
 		/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS  */
 		.mode = SPI_MODE_1 | SPI_CS_HIGH,
 	};
 	spi_register_board_info(&srtc_info, 1);
 	spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128);
 	spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128);
 	spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128);
 	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
 	gpio_direction_output(16 + SRTC_CS, 0);
 	gpio_request(SEEPROM1_CS, "seeprom1");
 	gpio_direction_output(SEEPROM1_CS, 1);
 	gpio_request(16 + SEEPROM2_CS, "seeprom2");
 	gpio_direction_output(16 + SEEPROM2_CS, 1);
 	gpio_request(16 + SEEPROM3_CS, "seeprom3");
 	gpio_direction_output(16 + SEEPROM3_CS, 1);
 	tx4938_spi_init(SPI_BUSNO);
 	return 0;
 }

 static void __init rbtx4938_mtd_init(void)
 {
 	struct physmap_flash_data pdata = {
 		.width = 4,
 	};

 	switch (readb(rbtx4938_bdipsw_addr) & 7) {
 	case 0:
 		/* Boot */
 		txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata);
 		/* System */
 		txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
 		break;
 	case 1:
 		/* System */
 		txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
 		/* Boot */
 		txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata);
 		break;
 	case 2:
 		/* Ext */
 		txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
 		/* System */
 		txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
 		/* Boot */
 		txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata);
 		break;
 	case 3:
 		/* Boot */
 		txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata);
 		/* System */
 		txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata);
 		break;
 	}
 }

 static void __init rbtx4938_arch_init(void)
 {
 	gpiochip_add(&rbtx4938_spi_gpio_chip);
 	rbtx4938_pci_setup();
 	rbtx4938_spi_init();
 }

 static void __init rbtx4938_device_init(void)
 {
 	rbtx4938_ethaddr_init();
 	rbtx4938_ne_init();
 	tx4938_wdt_init();
 	rbtx4938_mtd_init();
 	/* TC58DVM82A1FT: tDH=10ns, tWP=tRP=tREADID=35ns */
 	tx4938_ndfmc_init(10, 35);
 	tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
 	tx4938_dmac_init(0, 2);
 	tx4938_aclc_init();
 	platform_device_register_simple("txx9aclc-generic", -1, NULL, 0);
 	tx4938_sramc_init();
 	txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
 }

 struct txx9_board_vec rbtx4938_vec __initdata = {
 	.system = "Toshiba RBTX4938",
 	.prom_init = rbtx4938_prom_init,
 	.mem_setup = rbtx4938_mem_setup,
 	.irq_setup = rbtx4938_irq_setup,
 	.time_init = rbtx4938_time_init,
 	.device_init = rbtx4938_device_init,
 	.arch_init = rbtx4938_arch_init,
 #ifdef CONFIG_PCI
 	.pci_map_irq = rbtx4938_pci_map_irq,
 #endif
 };
	/*
	* Setup pointers to hardware-dependent routines.
	* Copyright (C) 2000-2001 Toshiba Corporation
	*
	* 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
	* terms of the GNU General Public License version 2. This program is
	* licensed "as is" without any warranty of any kind, whether express
	* or implied.
	*
	* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
	*/
	#include <linux/init.h>
	#include <linux/types.h>
	#include <linux/ioport.h>
	#include <linux/delay.h>
	#include <linux/platform_device.h>
	#include <linux/gpio.h>
	#include <linux/mtd/physmap.h>

	#include <asm/reboot.h>
	#include <asm/io.h>
	#include <asm/txx9/generic.h>
	#include <asm/txx9/pci.h>
	#include <asm/txx9/rbtx4938.h>
	#include <linux/spi/spi.h>
	#include <asm/txx9/spi.h>
	#include <asm/txx9pio.h>

	static void rbtx4938_machine_restart(char *command)
	{
	local_irq_disable();
	writeb(1, rbtx4938_softresetlock_addr);
	writeb(1, rbtx4938_sfvol_addr);
	writeb(1, rbtx4938_softreset_addr);
	/* fallback */
	(*_machine_halt)();
	}

	static void __init rbtx4938_pci_setup(void)
	{
	#ifdef CONFIG_PCI
	int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
	struct pci_controller *c = &txx9_primary_pcic;

	register_pci_controller(c);

	if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
	txx9_pci_option =
	(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) \|
	TXX9_PCI_OPT_CLK_66; /* already configured */

	/* Reset PCI Bus */
	writeb(0, rbtx4938_pcireset_addr);
	/* Reset PCIC */
	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
	TXX9_PCI_OPT_CLK_66)
	tx4938_pciclk66_setup();
	mdelay(10);
	/* clear PCIC reset */
	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
	writeb(1, rbtx4938_pcireset_addr);
	iob();

	tx4938_report_pciclk();
	tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
	TXX9_PCI_OPT_CLK_AUTO &&
	txx9_pci66_check(c, 0, 0)) {
	/* Reset PCI Bus */
	writeb(0, rbtx4938_pcireset_addr);
	/* Reset PCIC */
	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
	tx4938_pciclk66_setup();
	mdelay(10);
	/* clear PCIC reset */
	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
	writeb(1, rbtx4938_pcireset_addr);
	iob();
	/* Reinitialize PCIC */
	tx4938_report_pciclk();
	tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
	}

	if (__raw_readq(&tx4938_ccfgptr->pcfg) &
	(TX4938_PCFG_ETH0_SEL\|TX4938_PCFG_ETH1_SEL)) {
	/* Reset PCIC1 */
	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
	/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
	if (!(__raw_readq(&tx4938_ccfgptr->ccfg)
	& TX4938_CCFG_PCI1DMD))
	tx4938_ccfg_set(TX4938_CCFG_PCI1_66);
	mdelay(10);
	/* clear PCIC1 reset */
	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
	tx4938_report_pci1clk();

	/* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */
	c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000);
	register_pci_controller(c);
	tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
	}
	tx4938_setup_pcierr_irq();
	#endif /* CONFIG_PCI */
	}

	/* SPI support */

	/* chip select for SPI devices */
	#define SEEPROM1_CS 7 /* PIO7 */
	#define SEEPROM2_CS 0 /* IOC */
	#define SEEPROM3_CS 1 /* IOC */
	#define SRTC_CS 2 /* IOC */
	#define SPI_BUSNO 0

	static int __init rbtx4938_ethaddr_init(void)
	{
	#ifdef CONFIG_PCI
	unsigned char dat[17];
	unsigned char sum;
	int i;

	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
	if (spi_eeprom_read(SPI_BUSNO, SEEPROM1_CS, 0, dat, sizeof(dat))) {
	printk(KERN_ERR "seeprom: read error.\n");
	return -ENODEV;
	} else {
	if (strcmp(dat, "MAC") != 0)
	printk(KERN_WARNING "seeprom: bad signature.\n");
	for (i = 0, sum = 0; i < sizeof(dat); i++)
	sum += dat[i];
	if (sum)
	printk(KERN_WARNING "seeprom: bad checksum.\n");
	}
	tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
	#endif /* CONFIG_PCI */
	return 0;
	}

	static void __init rbtx4938_spi_setup(void)
	{
	/* set SPI_SEL */
	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL);
	}

	static struct resource rbtx4938_fpga_resource;

	static void __init rbtx4938_time_init(void)
	{
	tx4938_time_init(0);
	}

	static void __init rbtx4938_mem_setup(void)
	{
	unsigned long long pcfg;

	if (txx9_master_clock == 0)
	txx9_master_clock = 25000000; /* 25MHz */

	tx4938_setup();

	#ifdef CONFIG_PCI
	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
	txx9_board_pcibios_setup = tx4927_pcibios_setup;
	#else
	set_io_port_base(RBTX4938_ETHER_BASE);
	#endif

	tx4938_sio_init(7372800, 0);

	#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
	pr_info("PIOSEL: disabling both ATA and NAND selection\n");
	txx9_clear64(&tx4938_ccfgptr->pcfg,
	TX4938_PCFG_NDF_SEL \| TX4938_PCFG_ATA_SEL);
	#endif

	#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
	pr_info("PIOSEL: enabling NAND selection\n");
	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
	#endif

	#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
	pr_info("PIOSEL: enabling ATA selection\n");
	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
	#endif

	#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_KEEP
	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
	pr_info("PIOSEL: NAND %s, ATA %s\n",
	(pcfg & TX4938_PCFG_NDF_SEL) ? "enabled" : "disabled",
	(pcfg & TX4938_PCFG_ATA_SEL) ? "enabled" : "disabled");
	#endif

	rbtx4938_spi_setup();
	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */
	/* fixup piosel */
	if ((pcfg & (TX4938_PCFG_ATA_SEL \| TX4938_PCFG_NDF_SEL)) ==
	TX4938_PCFG_ATA_SEL)
	writeb((readb(rbtx4938_piosel_addr) & 0x03) \| 0x04,
	rbtx4938_piosel_addr);
	else if ((pcfg & (TX4938_PCFG_ATA_SEL \| TX4938_PCFG_NDF_SEL)) ==
	TX4938_PCFG_NDF_SEL)
	writeb((readb(rbtx4938_piosel_addr) & 0x03) \| 0x08,
	rbtx4938_piosel_addr);
	else
	writeb(readb(rbtx4938_piosel_addr) & ~(0x08 \| 0x04),
	rbtx4938_piosel_addr);

	rbtx4938_fpga_resource.name = "FPGA Registers";
	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
	rbtx4938_fpga_resource.flags = IORESOURCE_MEM \| IORESOURCE_BUSY;
	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
	printk(KERN_ERR "request resource for fpga failed\n");

	_machine_restart = rbtx4938_machine_restart;

	writeb(0xff, rbtx4938_led_addr);
	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
	readb(rbtx4938_fpga_rev_addr),
	readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
	}

	static void __init rbtx4938_ne_init(void)
	{
	struct resource res[] = {
	{
	.start = RBTX4938_RTL_8019_BASE,
	.end = RBTX4938_RTL_8019_BASE + 0x20 - 1,
	.flags = IORESOURCE_IO,
	}, {
	.start = RBTX4938_RTL_8019_IRQ,
	.flags = IORESOURCE_IRQ,
	}
	};
	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
	}

	static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);

	static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
	int value)
	{
	u8 val;
	unsigned long flags;
	spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
	val = readb(rbtx4938_spics_addr);
	if (value)
	val \|= 1 << offset;
	else
	val &= ~(1 << offset);
	writeb(val, rbtx4938_spics_addr);
	mmiowb();
	spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
	}

	static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
	unsigned int offset, int value)
	{
	rbtx4938_spi_gpio_set(chip, offset, value);
	return 0;
	}

	static struct gpio_chip rbtx4938_spi_gpio_chip = {
	.set = rbtx4938_spi_gpio_set,
	.direction_output = rbtx4938_spi_gpio_dir_out,
	.label = "RBTX4938-SPICS",
	.base = 16,
	.ngpio = 3,
	};

	static int __init rbtx4938_spi_init(void)
	{
	struct spi_board_info srtc_info = {
	.modalias = "rtc-rs5c348",
	.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
	.bus_num = 0,
	.chip_select = 16 + SRTC_CS,
	/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */
	.mode = SPI_MODE_1 \| SPI_CS_HIGH,
	};
	spi_register_board_info(&srtc_info, 1);
	spi_eeprom_register(SPI_BUSNO, SEEPROM1_CS, 128);
	spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM2_CS, 128);
	spi_eeprom_register(SPI_BUSNO, 16 + SEEPROM3_CS, 128);
	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
	gpio_direction_output(16 + SRTC_CS, 0);
	gpio_request(SEEPROM1_CS, "seeprom1");
	gpio_direction_output(SEEPROM1_CS, 1);
	gpio_request(16 + SEEPROM2_CS, "seeprom2");
	gpio_direction_output(16 + SEEPROM2_CS, 1);
	gpio_request(16 + SEEPROM3_CS, "seeprom3");
	gpio_direction_output(16 + SEEPROM3_CS, 1);
	tx4938_spi_init(SPI_BUSNO);
	return 0;
	}

	static void __init rbtx4938_mtd_init(void)
	{
	struct physmap_flash_data pdata = {
	.width = 4,
	};

	switch (readb(rbtx4938_bdipsw_addr) & 7) {
	case 0:
	/* Boot */
	txx9_physmap_flash_init(0, 0x1fc00000, 0x400000, &pdata);
	/* System */
	txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
	break;
	case 1:
	/* System */
	txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
	/* Boot */
	txx9_physmap_flash_init(1, 0x1ec00000, 0x400000, &pdata);
	break;
	case 2:
	/* Ext */
	txx9_physmap_flash_init(0, 0x1f000000, 0x1000000, &pdata);
	/* System */
	txx9_physmap_flash_init(1, 0x1e000000, 0x1000000, &pdata);
	/* Boot */
	txx9_physmap_flash_init(2, 0x1dc00000, 0x400000, &pdata);
	break;
	case 3:
	/* Boot */
	txx9_physmap_flash_init(1, 0x1bc00000, 0x400000, &pdata);
	/* System */
	txx9_physmap_flash_init(2, 0x1a000000, 0x1000000, &pdata);
	break;
	}
	}

	static void __init rbtx4938_arch_init(void)
	{
	gpiochip_add(&rbtx4938_spi_gpio_chip);
	rbtx4938_pci_setup();
	rbtx4938_spi_init();
	}

	static void __init rbtx4938_device_init(void)
	{
	rbtx4938_ethaddr_init();
	rbtx4938_ne_init();
	tx4938_wdt_init();
	rbtx4938_mtd_init();
	/* TC58DVM82A1FT: tDH=10ns, tWP=tRP=tREADID=35ns */
	tx4938_ndfmc_init(10, 35);
	tx4938_ata_init(RBTX4938_IRQ_IOC_ATA, 0, 1);
	tx4938_dmac_init(0, 2);
	tx4938_aclc_init();
	platform_device_register_simple("txx9aclc-generic", -1, NULL, 0);
	tx4938_sramc_init();
	txx9_iocled_init(RBTX4938_LED_ADDR - IO_BASE, -1, 8, 1, "green", NULL);
	}

	struct txx9_board_vec rbtx4938_vec __initdata = {
	.system = "Toshiba RBTX4938",
	.prom_init = rbtx4938_prom_init,
	.mem_setup = rbtx4938_mem_setup,
	.irq_setup = rbtx4938_irq_setup,
	.time_init = rbtx4938_time_init,
	.device_init = rbtx4938_device_init,
	.arch_init = rbtx4938_arch_init,
	#ifdef CONFIG_PCI
	.pci_map_irq = rbtx4938_pci_map_irq,
	#endif
	};