| /****************************************************************************** |
| * |
| * Name: skgeinit.h |
| * Project: Gigabit Ethernet Adapters, Common Modules |
| * Version: $Revision: 1.83 $ |
| * Date: $Date: 2003/09/16 14:07:37 $ |
| * Purpose: Structures and prototypes for the GE Init Module |
| * |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * |
| * (C)Copyright 1998-2002 SysKonnect. |
| * (C)Copyright 2002-2003 Marvell. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * The information in this file is provided "AS IS" without warranty. |
| * |
| ******************************************************************************/ |
| |
| #ifndef __INC_SKGEINIT_H_ |
| #define __INC_SKGEINIT_H_ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* __cplusplus */ |
| |
| /* defines ********************************************************************/ |
| |
| #define SK_TEST_VAL 0x11335577UL |
| |
| /* modifying Link LED behaviour (used with SkGeLinkLED()) */ |
| #define SK_LNK_OFF LED_OFF |
| #define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) |
| #define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON) |
| #define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON) |
| #define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF) |
| |
| /* parameter 'Mode' when calling SK_HWAC_LINK_LED() */ |
| #define SK_LED_OFF LED_OFF |
| #define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) |
| #define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF) |
| |
| /* addressing LED Registers in SkGeXmitLED() */ |
| #define XMIT_LED_INI 0 |
| #define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI) |
| #define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI) |
| #define XMIT_LED_TST (RX_LED_TST - RX_LED_INI) |
| |
| /* parameter 'Mode' when calling SkGeXmitLED() */ |
| #define SK_LED_DIS 0 |
| #define SK_LED_ENA 1 |
| #define SK_LED_TST 2 |
| |
| /* Counter and Timer constants, for a host clock of 62.5 MHz */ |
| #define SK_XMIT_DUR 0x002faf08UL /* 50 ms */ |
| #define SK_BLK_DUR 0x01dcd650UL /* 500 ms */ |
| |
| #define SK_DPOLL_DEF 0x00ee6b28UL /* 250 ms at 62.5 MHz */ |
| |
| #define SK_DPOLL_MAX 0x00ffffffUL /* 268 ms at 62.5 MHz */ |
| /* 215 ms at 78.12 MHz */ |
| |
| #define SK_FACT_62 100 /* is given in percent */ |
| #define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */ |
| #define SK_FACT_78 125 /* on YUKON: 78.12 MHz */ |
| |
| /* Timeout values */ |
| #define SK_MAC_TO_53 72 /* MAC arbiter timeout */ |
| #define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */ |
| #define SK_PKT_TO_MAX 0xffff /* Maximum value */ |
| #define SK_RI_TO_53 36 /* RAM interface timeout */ |
| |
| #define SK_PHY_ACC_TO 600000 /* PHY access timeout */ |
| |
| /* RAM Buffer High Pause Threshold values */ |
| #define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */ |
| #define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */ |
| #define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */ |
| |
| #ifndef SK_BMU_RX_WM |
| #define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */ |
| #endif |
| #ifndef SK_BMU_TX_WM |
| #define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */ |
| #endif |
| |
| /* XMAC II Rx High Watermark */ |
| #define SK_XM_RX_HI_WM 0x05aa /* 1450 */ |
| |
| /* XMAC II Tx Threshold */ |
| #define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */ |
| #define SK_XM_THR_SL 0x01fb /* .. for single link adapters */ |
| #define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */ |
| #define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */ |
| |
| /* values for GIPortUsage */ |
| #define SK_RED_LINK 1 /* redundant link usage */ |
| #define SK_MUL_LINK 2 /* multiple link usage */ |
| #define SK_JUMBO_LINK 3 /* driver uses jumbo frames */ |
| |
| /* Minimum RAM Buffer Rx Queue Size */ |
| #define SK_MIN_RXQ_SIZE 16 /* 16 kB */ |
| |
| /* Minimum RAM Buffer Tx Queue Size */ |
| #define SK_MIN_TXQ_SIZE 16 /* 16 kB */ |
| |
| /* Queue Size units */ |
| #define QZ_UNITS 0x7 |
| #define QZ_STEP 8 |
| |
| /* Percentage of queue size from whole memory */ |
| /* 80 % for receive */ |
| #define RAM_QUOTA_RX 80L |
| /* 0% for sync transfer */ |
| #define RAM_QUOTA_SYNC 0L |
| /* the rest (20%) is taken for async transfer */ |
| |
| /* Get the rounded queue size in Bytes in 8k steps */ |
| #define ROUND_QUEUE_SIZE(SizeInBytes) \ |
| ((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \ |
| ~(QZ_STEP-1)) |
| |
| /* Get the rounded queue size in KBytes in 8k steps */ |
| #define ROUND_QUEUE_SIZE_KB(Kilobytes) \ |
| ROUND_QUEUE_SIZE((Kilobytes) * 1024L) |
| |
| /* Types of RAM Buffer Queues */ |
| #define SK_RX_SRAM_Q 1 /* small receive queue */ |
| #define SK_RX_BRAM_Q 2 /* big receive queue */ |
| #define SK_TX_RAM_Q 3 /* small or big transmit queue */ |
| |
| /* parameter 'Dir' when calling SkGeStopPort() */ |
| #define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */ |
| #define SK_STOP_RX 2 /* Stops the receive path */ |
| #define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */ |
| |
| /* parameter 'RstMode' when calling SkGeStopPort() */ |
| #define SK_SOFT_RST 1 /* perform a software reset */ |
| #define SK_HARD_RST 2 /* perform a hardware reset */ |
| |
| /* Init Levels */ |
| #define SK_INIT_DATA 0 /* Init level 0: init data structures */ |
| #define SK_INIT_IO 1 /* Init level 1: init with IOs */ |
| #define SK_INIT_RUN 2 /* Init level 2: init for run time */ |
| |
| /* Link Mode Parameter */ |
| #define SK_LMODE_HALF 1 /* Half Duplex Mode */ |
| #define SK_LMODE_FULL 2 /* Full Duplex Mode */ |
| #define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */ |
| #define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */ |
| #define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */ |
| #define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */ |
| #define SK_LMODE_INDETERMINATED 7 /* indeterminated */ |
| |
| /* Auto-negotiation timeout in 100ms granularity */ |
| #define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */ |
| |
| /* Auto-negotiation error codes */ |
| #define SK_AND_OK 0 /* no error */ |
| #define SK_AND_OTHER 1 /* other error than below */ |
| #define SK_AND_DUP_CAP 2 /* Duplex capabilities error */ |
| |
| |
| /* Link Speed Capabilities */ |
| #define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */ |
| #define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */ |
| #define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */ |
| #define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */ |
| #define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */ |
| |
| /* Link Speed Parameter */ |
| #define SK_LSPEED_AUTO 1 /* Automatic resolution */ |
| #define SK_LSPEED_10MBPS 2 /* 10 Mbps */ |
| #define SK_LSPEED_100MBPS 3 /* 100 Mbps */ |
| #define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */ |
| #define SK_LSPEED_INDETERMINATED 5 /* indeterminated */ |
| |
| /* Link Speed Current State */ |
| #define SK_LSPEED_STAT_UNKNOWN 1 |
| #define SK_LSPEED_STAT_10MBPS 2 |
| #define SK_LSPEED_STAT_100MBPS 3 |
| #define SK_LSPEED_STAT_1000MBPS 4 |
| #define SK_LSPEED_STAT_INDETERMINATED 5 |
| |
| |
| /* Link Capability Parameter */ |
| #define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */ |
| #define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */ |
| #define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */ |
| #define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */ |
| #define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */ |
| |
| /* Link Mode Current State */ |
| #define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */ |
| #define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */ |
| #define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */ |
| #define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */ |
| #define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */ |
| #define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */ |
| |
| /* Flow Control Mode Parameter (and capabilities) */ |
| #define SK_FLOW_MODE_NONE 1 /* No Flow-Control */ |
| #define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */ |
| #define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */ |
| #define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or |
| * just the remote station may send PAUSE |
| */ |
| #define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */ |
| |
| /* Flow Control Status Parameter */ |
| #define SK_FLOW_STAT_NONE 1 /* No Flow Control */ |
| #define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */ |
| #define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */ |
| #define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */ |
| #define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */ |
| |
| /* Master/Slave Mode Capabilities */ |
| #define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */ |
| #define SK_MS_CAP_MASTER (1<<1) /* This station is master */ |
| #define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */ |
| #define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */ |
| |
| /* Set Master/Slave Mode Parameter (and capabilities) */ |
| #define SK_MS_MODE_AUTO 1 /* Automatic resolution */ |
| #define SK_MS_MODE_MASTER 2 /* This station is master */ |
| #define SK_MS_MODE_SLAVE 3 /* This station is slave */ |
| #define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */ |
| |
| /* Master/Slave Status Parameter */ |
| #define SK_MS_STAT_UNSET 1 /* The M/S status is not set */ |
| #define SK_MS_STAT_MASTER 2 /* This station is master */ |
| #define SK_MS_STAT_SLAVE 3 /* This station is slave */ |
| #define SK_MS_STAT_FAULT 4 /* M/S resolution failed */ |
| #define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */ |
| |
| /* parameter 'Mode' when calling SkXmSetRxCmd() */ |
| #define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */ |
| #define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */ |
| #define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */ |
| #define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */ |
| #define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */ |
| #define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */ |
| #define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */ |
| #define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */ |
| #define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */ |
| #define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */ |
| |
| /* parameter 'Para' when calling SkMacSetRxTxEn() */ |
| #define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */ |
| #define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */ |
| #define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */ |
| #define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */ |
| #define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */ |
| #define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */ |
| |
| /* States of PState */ |
| #define SK_PRT_RESET 0 /* the port is reset */ |
| #define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */ |
| #define SK_PRT_INIT 2 /* the port is initialized */ |
| #define SK_PRT_RUN 3 /* the port has an active link */ |
| |
| /* PHY power down modes */ |
| #define PHY_PM_OPERATIONAL_MODE 0 /* PHY operational mode */ |
| #define PHY_PM_DEEP_SLEEP 1 /* coma mode --> minimal power */ |
| #define PHY_PM_IEEE_POWER_DOWN 2 /* IEEE 22.2.4.1.5 compl. power down */ |
| #define PHY_PM_ENERGY_DETECT 3 /* energy detect */ |
| #define PHY_PM_ENERGY_DETECT_PLUS 4 /* energy detect plus */ |
| |
| /* Default receive frame limit for Workaround of XMAC Errata */ |
| #define SK_DEF_RX_WA_LIM SK_CONSTU64(100) |
| |
| /* values for GILedBlinkCtrl (LED Blink Control) */ |
| #define SK_ACT_LED_BLINK (1<<0) /* Active LED blinking */ |
| #define SK_DUP_LED_NORMAL (1<<1) /* Duplex LED normal */ |
| #define SK_LED_LINK100_ON (1<<2) /* Link 100M LED on */ |
| |
| /* Link Partner Status */ |
| #define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */ |
| #define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */ |
| #define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */ |
| |
| /* Maximum Restarts before restart is ignored (3Com WA) */ |
| #define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */ |
| |
| /* Max. Auto-neg. timeouts before link detection in sense mode is reset */ |
| #define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */ |
| |
| /* structures *****************************************************************/ |
| |
| /* |
| * MAC specific functions |
| */ |
| typedef struct s_GeMacFunc { |
| int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); |
| int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, |
| SK_U16 StatAddr, SK_U32 SK_FAR *pVal); |
| int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); |
| int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, |
| SK_U16 IStatus, SK_U64 SK_FAR *pVal); |
| } SK_GEMACFUNC; |
| |
| /* |
| * Port Structure |
| */ |
| typedef struct s_GePort { |
| #ifndef SK_DIAG |
| SK_TIMER PWaTimer; /* Workaround Timer */ |
| SK_TIMER HalfDupChkTimer; |
| #endif /* SK_DIAG */ |
| SK_U32 PPrevShorts; /* Previous Short Counter checking */ |
| SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */ |
| SK_U64 PPrevRx; /* Previous RxOk Counter checking */ |
| SK_U64 PRxLim; /* Previous RxOk Counter checking */ |
| SK_U64 LastOctets; /* For half duplex hang check */ |
| int PLinkResCt; /* Link Restart Counter */ |
| int PAutoNegTimeOut;/* Auto-negotiation timeout current value */ |
| int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */ |
| int PRxQSize; /* Port Rx Queue Size in kB */ |
| int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */ |
| int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */ |
| SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */ |
| SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */ |
| SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */ |
| SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */ |
| SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */ |
| SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */ |
| SK_U32 PRxOverCnt; /* Receive Overflow Counter */ |
| int PRxQOff; /* Rx Queue Address Offset */ |
| int PXsQOff; /* Synchronous Tx Queue Address Offset */ |
| int PXaQOff; /* Asynchronous Tx Queue Address Offset */ |
| int PhyType; /* PHY used on this port */ |
| int PState; /* Port status (reset, stop, init, run) */ |
| SK_U16 PhyId1; /* PHY Id1 on this port */ |
| SK_U16 PhyAddr; /* MDIO/MDC PHY address */ |
| SK_U16 PIsave; /* Saved Interrupt status word */ |
| SK_U16 PSsave; /* Saved PHY status word */ |
| SK_U16 PGmANegAdv; /* Saved GPhy AutoNegAdvertisment register */ |
| SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */ |
| SK_BOOL PLinkBroken; /* Is Link broken ? */ |
| SK_BOOL PCheckPar; /* Do we check for parity errors ? */ |
| SK_BOOL HalfDupTimerActive; |
| SK_U8 PLinkCap; /* Link Capabilities */ |
| SK_U8 PLinkModeConf; /* Link Mode configured */ |
| SK_U8 PLinkMode; /* Link Mode currently used */ |
| SK_U8 PLinkModeStatus;/* Link Mode Status */ |
| SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */ |
| SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */ |
| SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */ |
| SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */ |
| SK_U8 PFlowCtrlMode; /* Flow Control Mode */ |
| SK_U8 PFlowCtrlStatus;/* Flow Control Status */ |
| SK_U8 PMSCap; /* Master/Slave Capabilities */ |
| SK_U8 PMSMode; /* Master/Slave Mode */ |
| SK_U8 PMSStatus; /* Master/Slave Status */ |
| SK_BOOL PAutoNegFail; /* Auto-negotiation fail flag */ |
| SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */ |
| SK_U8 PCableLen; /* Cable Length */ |
| SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */ |
| SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */ |
| SK_U8 PPhyPowerState; /* PHY current power state */ |
| int PMacColThres; /* MAC Collision Threshold */ |
| int PMacJamLen; /* MAC Jam length */ |
| int PMacJamIpgVal; /* MAC Jam IPG */ |
| int PMacJamIpgData; /* MAC IPG Jam to Data */ |
| int PMacIpgData; /* MAC Data IPG */ |
| SK_BOOL PMacLimit4; /* reset collision counter and backoff algorithm */ |
| } SK_GEPORT; |
| |
| /* |
| * Gigabit Ethernet Initialization Struct |
| * (has to be included in the adapter context) |
| */ |
| typedef struct s_GeInit { |
| int GIChipId; /* Chip Identification Number */ |
| int GIChipRev; /* Chip Revision Number */ |
| SK_U8 GIPciHwRev; /* PCI HW Revision Number */ |
| SK_BOOL GIGenesis; /* Genesis adapter ? */ |
| SK_BOOL GIYukon; /* YUKON-A1/Bx chip */ |
| SK_BOOL GIYukonLite; /* YUKON-Lite chip */ |
| SK_BOOL GICopperType; /* Copper Type adapter ? */ |
| SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */ |
| SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */ |
| SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */ |
| SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */ |
| SK_U16 GILedBlinkCtrl; /* LED Blink Control */ |
| int GIMacsFound; /* Number of MACs found on this adapter */ |
| int GIMacType; /* MAC Type used on this adapter */ |
| int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */ |
| int GIPortUsage; /* Driver Port Usage */ |
| int GILevel; /* Initialization Level completed */ |
| int GIRamSize; /* The RAM size of the adapter in kB */ |
| int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */ |
| SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */ |
| SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */ |
| SK_U32 GIValIrqMask; /* Value for Interrupt Mask */ |
| SK_U32 GITimeStampCnt; /* Time Stamp High Counter (YUKON only) */ |
| SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */ |
| SK_GEMACFUNC GIFunc; /* MAC depedent functions */ |
| } SK_GEINIT; |
| |
| /* |
| * Error numbers and messages for skxmac2.c and skgeinit.c |
| */ |
| #define SKERR_HWI_E001 (SK_ERRBASE_HWINIT) |
| #define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters" |
| #define SKERR_HWI_E002 (SKERR_HWI_E001+1) |
| #define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing" |
| #define SKERR_HWI_E003 (SKERR_HWI_E002+1) |
| #define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level" |
| #define SKERR_HWI_E004 (SKERR_HWI_E003+1) |
| #define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured" |
| #define SKERR_HWI_E005 (SKERR_HWI_E004+1) |
| #define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports" |
| #define SKERR_HWI_E006 (SKERR_HWI_E005+1) |
| #define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state" |
| #define SKERR_HWI_E007 (SKERR_HWI_E006+1) |
| #define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode" |
| #define SKERR_HWI_E008 (SKERR_HWI_E007+1) |
| #define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode" |
| #define SKERR_HWI_E009 (SKERR_HWI_E008+1) |
| #define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero" |
| #define SKERR_HWI_E010 (SKERR_HWI_E009+1) |
| #define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters" |
| #define SKERR_HWI_E011 (SKERR_HWI_E010+1) |
| #define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small" |
| #define SKERR_HWI_E012 (SKERR_HWI_E011+1) |
| #define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified" |
| #define SKERR_HWI_E013 (SKERR_HWI_E012+1) |
| #define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue" |
| #define SKERR_HWI_E014 (SKERR_HWI_E013+1) |
| #define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified" |
| #define SKERR_HWI_E015 (SKERR_HWI_E014+1) |
| #define SKERR_HWI_E015MSG "Illegal Link mode parameter" |
| #define SKERR_HWI_E016 (SKERR_HWI_E015+1) |
| #define SKERR_HWI_E016MSG "Illegal Flow control mode parameter" |
| #define SKERR_HWI_E017 (SKERR_HWI_E016+1) |
| #define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal" |
| #define SKERR_HWI_E018 (SKERR_HWI_E017+1) |
| #define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)" |
| #define SKERR_HWI_E019 (SKERR_HWI_E018+1) |
| #define SKERR_HWI_E019MSG "Illegal Speed parameter" |
| #define SKERR_HWI_E020 (SKERR_HWI_E019+1) |
| #define SKERR_HWI_E020MSG "Illegal Master/Slave parameter" |
| #define SKERR_HWI_E021 (SKERR_HWI_E020+1) |
| #define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter" |
| #define SKERR_HWI_E022 (SKERR_HWI_E021+1) |
| #define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address" |
| #define SKERR_HWI_E023 (SKERR_HWI_E022+1) |
| #define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small" |
| #define SKERR_HWI_E024 (SKERR_HWI_E023+1) |
| #define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)" |
| #define SKERR_HWI_E025 (SKERR_HWI_E024+1) |
| #define SKERR_HWI_E025MSG "" |
| |
| /* function prototypes ********************************************************/ |
| |
| #ifndef SK_KR_PROTO |
| |
| /* |
| * public functions in skgeinit.c |
| */ |
| extern void SkGePollTxD( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL PollTxD); |
| |
| extern void SkGeYellowLED( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int State); |
| |
| extern int SkGeCfgSync( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_U32 IntTime, |
| SK_U32 LimCount, |
| int SyncMode); |
| |
| extern void SkGeLoadLnkSyncCnt( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_U32 CntVal); |
| |
| extern void SkGeStopPort( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Dir, |
| int RstMode); |
| |
| extern int SkGeInit( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Level); |
| |
| extern void SkGeDeInit( |
| SK_AC *pAC, |
| SK_IOC IoC); |
| |
| extern int SkGeInitPort( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkGeXmitLED( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Led, |
| int Mode); |
| |
| extern int SkGeInitAssignRamToQueues( |
| SK_AC *pAC, |
| int ActivePort, |
| SK_BOOL DualNet); |
| |
| /* |
| * public functions in skxmac2.c |
| */ |
| extern void SkMacRxTxDisable( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacSoftRst( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacHardRst( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkXmInitMac( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkGmInitMac( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacInitPhy( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL DoLoop); |
| |
| extern void SkMacIrqDisable( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacFlushTxFifo( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacIrq( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern int SkMacAutoNegDone( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacAutoNegLipaPhy( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_U16 IStatus); |
| |
| extern int SkMacRxTxEnable( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port); |
| |
| extern void SkMacPromiscMode( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| |
| extern void SkMacHashing( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| |
| extern void SkXmPhyRead( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 SK_FAR *pVal); |
| |
| extern void SkXmPhyWrite( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 Val); |
| |
| extern void SkGmPhyRead( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 SK_FAR *pVal); |
| |
| extern void SkGmPhyWrite( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 Val); |
| |
| extern void SkXmClrExactAddr( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int StartNum, |
| int StopNum); |
| |
| extern void SkXmAutoNegLipaXmac( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_U16 IStatus); |
| |
| extern int SkXmUpdateStats( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port); |
| |
| extern int SkGmUpdateStats( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port); |
| |
| extern int SkXmMacStatistic( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port, |
| SK_U16 StatAddr, |
| SK_U32 SK_FAR *pVal); |
| |
| extern int SkGmMacStatistic( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port, |
| SK_U16 StatAddr, |
| SK_U32 SK_FAR *pVal); |
| |
| extern int SkXmResetCounter( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port); |
| |
| extern int SkGmResetCounter( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port); |
| |
| extern int SkXmOverflowStatus( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port, |
| SK_U16 IStatus, |
| SK_U64 SK_FAR *pStatus); |
| |
| extern int SkGmOverflowStatus( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| unsigned int Port, |
| SK_U16 MacStatus, |
| SK_U64 SK_FAR *pStatus); |
| |
| extern int SkGmCableDiagStatus( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL StartTest); |
| |
| #ifdef SK_DIAG |
| extern void SkGePhyRead( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 *pVal); |
| |
| extern void SkGePhyWrite( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Addr, |
| SK_U16 Val); |
| |
| extern void SkMacSetRxCmd( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| int Mode); |
| extern void SkMacCrcGener( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| extern void SkMacTimeStamp( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| extern void SkXmSendCont( |
| SK_AC *pAC, |
| SK_IOC IoC, |
| int Port, |
| SK_BOOL Enable); |
| #endif /* SK_DIAG */ |
| |
| #else /* SK_KR_PROTO */ |
| |
| /* |
| * public functions in skgeinit.c |
| */ |
| extern void SkGePollTxD(); |
| extern void SkGeYellowLED(); |
| extern int SkGeCfgSync(); |
| extern void SkGeLoadLnkSyncCnt(); |
| extern void SkGeStopPort(); |
| extern int SkGeInit(); |
| extern void SkGeDeInit(); |
| extern int SkGeInitPort(); |
| extern void SkGeXmitLED(); |
| extern int SkGeInitAssignRamToQueues(); |
| |
| /* |
| * public functions in skxmac2.c |
| */ |
| extern void SkMacRxTxDisable(); |
| extern void SkMacSoftRst(); |
| extern void SkMacHardRst(); |
| extern void SkMacInitPhy(); |
| extern int SkMacRxTxEnable(); |
| extern void SkMacPromiscMode(); |
| extern void SkMacHashing(); |
| extern void SkMacIrqDisable(); |
| extern void SkMacFlushTxFifo(); |
| extern void SkMacIrq(); |
| extern int SkMacAutoNegDone(); |
| extern void SkMacAutoNegLipaPhy(); |
| extern void SkXmInitMac(); |
| extern void SkXmPhyRead(); |
| extern void SkXmPhyWrite(); |
| extern void SkGmInitMac(); |
| extern void SkGmPhyRead(); |
| extern void SkGmPhyWrite(); |
| extern void SkXmClrExactAddr(); |
| extern void SkXmAutoNegLipaXmac(); |
| extern int SkXmUpdateStats(); |
| extern int SkGmUpdateStats(); |
| extern int SkXmMacStatistic(); |
| extern int SkGmMacStatistic(); |
| extern int SkXmResetCounter(); |
| extern int SkGmResetCounter(); |
| extern int SkXmOverflowStatus(); |
| extern int SkGmOverflowStatus(); |
| extern int SkGmCableDiagStatus(); |
| |
| #ifdef SK_DIAG |
| extern void SkGePhyRead(); |
| extern void SkGePhyWrite(); |
| extern void SkMacSetRxCmd(); |
| extern void SkMacCrcGener(); |
| extern void SkMacTimeStamp(); |
| extern void SkXmSendCont(); |
| #endif /* SK_DIAG */ |
| |
| #endif /* SK_KR_PROTO */ |
| |
| #ifdef __cplusplus |
| } |
| #endif /* __cplusplus */ |
| |
| #endif /* __INC_SKGEINIT_H_ */ |