i2c: Replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 2a31601..b1b45dd 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -658,7 +658,7 @@
OTG_CTRL_REG |= OTG_PULLUP;
}
- check_state(isp, __FUNCTION__);
+ check_state(isp, __func__);
dump_regs(isp, "otg->isp1301");
}
@@ -782,7 +782,7 @@
if (otg_ctrl & OTG_DRIVER_SEL) {
switch (isp->otg.state) {
case OTG_STATE_A_IDLE:
- b_idle(isp, __FUNCTION__);
+ b_idle(isp, __func__);
break;
default:
break;
@@ -826,7 +826,7 @@
isp->otg.host->otg_port);
}
- check_state(isp, __FUNCTION__);
+ check_state(isp, __func__);
return ret;
}
@@ -837,7 +837,7 @@
if (!otg_dev)
return -ENODEV;
- dump_regs(isp, __FUNCTION__);
+ dump_regs(isp, __func__);
/* some of these values are board-specific... */
OTG_SYSCON_2_REG |= OTG_EN
/* for B-device: */
@@ -853,9 +853,9 @@
update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
- check_state(isp, __FUNCTION__);
+ check_state(isp, __func__);
pr_debug("otg: %s, %s %06x\n",
- state_name(isp), __FUNCTION__, OTG_CTRL_REG);
+ state_name(isp), __func__, OTG_CTRL_REG);
OTG_IRQ_EN_REG = DRIVER_SWITCH | OPRT_CHG
| B_SRP_TMROUT | B_HNP_FAIL
@@ -1041,11 +1041,11 @@
OTG1_DP_PULLDOWN);
isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
OTG1_DP_PULLUP);
- dump_regs(isp, __FUNCTION__);
+ dump_regs(isp, __func__);
#endif
/* FALLTHROUGH */
case OTG_STATE_B_SRP_INIT:
- b_idle(isp, __FUNCTION__);
+ b_idle(isp, __func__);
OTG_CTRL_REG &= OTG_CTRL_REG & OTG_XCEIV_OUTPUTS;
/* FALLTHROUGH */
case OTG_STATE_B_IDLE:
@@ -1077,7 +1077,7 @@
*/
update_otg1(isp, isp_stat);
update_otg2(isp, isp_bstat);
- check_state(isp, __FUNCTION__);
+ check_state(isp, __func__);
#endif
dump_regs(isp, "isp1301->otg");
@@ -1310,7 +1310,7 @@
*/
isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV);
- dump_regs(isp, __FUNCTION__);
+ dump_regs(isp, __func__);
return 0;
@@ -1365,7 +1365,7 @@
isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
INTR_VBUS_VLD);
dev_info(&isp->client.dev, "B-Peripheral sessions ok\n");
- dump_regs(isp, __FUNCTION__);
+ dump_regs(isp, __func__);
/* If this has a Mini-AB connector, this mode is highly
* nonstandard ... but can be handy for testing, so long
@@ -1416,7 +1416,7 @@
pr_debug("otg: SRP, %s ... %06x\n", state_name(isp), OTG_CTRL_REG);
#ifdef CONFIG_USB_OTG
- check_state(isp, __FUNCTION__);
+ check_state(isp, __func__);
#endif
return 0;
}
@@ -1463,7 +1463,7 @@
}
pr_debug("otg: HNP %s, %06x ...\n",
state_name(isp), OTG_CTRL_REG);
- check_state(isp, __FUNCTION__);
+ check_state(isp, __func__);
return 0;
#else
/* srp-only */
@@ -1601,7 +1601,7 @@
update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
#endif
- dump_regs(isp, __FUNCTION__);
+ dump_regs(isp, __func__);
#ifdef VERBOSE
mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);