input/tc3589x: add tc3589x keypad support
Add support for the keypad controller module found on the
TC3589X devices. This driver default adds the support for
TC35893 device.
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
[Some minor fixups for compilation]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h
index da00958..16c76e1 100644
--- a/include/linux/mfd/tc3589x.h
+++ b/include/linux/mfd/tc3589x.h
@@ -20,6 +20,17 @@
#define TC3589x_RSTCTRL_KBDRST (1 << 1)
#define TC3589x_RSTCTRL_GPIRST (1 << 0)
+/* Keyboard Configuration Registers */
+#define TC3589x_KBDSETTLE_REG 0x01
+#define TC3589x_KBDBOUNCE 0x02
+#define TC3589x_KBDSIZE 0x03
+#define TC3589x_KBCFG_LSB 0x04
+#define TC3589x_KBCFG_MSB 0x05
+#define TC3589x_KBDIC 0x08
+#define TC3589x_KBDMSK 0x09
+#define TC3589x_EVTCODE_FIFO 0x10
+#define TC3589x_KBDMFS 0x8F
+
#define TC3589x_IRQST 0x91
#define TC3589x_MANFCODE_MAGIC 0x03
@@ -35,6 +46,14 @@
#define TC3589x_EXTRSTN 0x83
#define TC3589x_RSTINTCLR 0x84
+/* Pull up/down configuration registers */
+#define TC3589x_IOCFG 0xA7
+#define TC3589x_IOPULLCFG0_LSB 0xAA
+#define TC3589x_IOPULLCFG0_MSB 0xAB
+#define TC3589x_IOPULLCFG1_LSB 0xAC
+#define TC3589x_IOPULLCFG1_MSB 0xAD
+#define TC3589x_IOPULLCFG2_LSB 0xAE
+
#define TC3589x_GPIOIS0 0xC9
#define TC3589x_GPIOIS1 0xCA
#define TC3589x_GPIOIS2 0xCB
@@ -112,6 +131,37 @@
const u8 *values);
extern int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val);
+/*
+ * Keypad related platform specific constants
+ * These values may be modified for fine tuning
+ */
+#define TC_KPD_ROWS 0x8
+#define TC_KPD_COLUMNS 0x8
+#define TC_KPD_DEBOUNCE_PERIOD 0xA3
+#define TC_KPD_SETTLE_TIME 0xA3
+
+/**
+ * struct tc35893_platform_data - data structure for platform specific data
+ * @keymap_data: matrix scan code table for keycodes
+ * @krow: mask for available rows, value is 0xFF
+ * @kcol: mask for available columns, value is 0xFF
+ * @debounce_period: platform specific debounce time
+ * @settle_time: platform specific settle down time
+ * @irqtype: type of interrupt, falling or rising edge
+ * @enable_wakeup: specifies if keypad event can wake up system from sleep
+ * @no_autorepeat: flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+ const struct matrix_keymap_data *keymap_data;
+ u8 krow;
+ u8 kcol;
+ u8 debounce_period;
+ u8 settle_time;
+ unsigned long irqtype;
+ bool enable_wakeup;
+ bool no_autorepeat;
+};
+
/**
* struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
* @gpio_base: first gpio number assigned to TC3589x. A maximum of
@@ -130,11 +180,13 @@
* @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
* @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used.
* @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
*/
struct tc3589x_platform_data {
unsigned int block;
int irq_base;
struct tc3589x_gpio_platform_data *gpio;
+ const struct tc3589x_keypad_platform_data *keypad;
};
#define TC3589x_NR_GPIOS 24