[S390] vmur: fix diag14 exceptions with addresses > 2GB.
There are several s390 diagnose calls, which must be executed below the
2GB memory boundary. In order to enforce this, those diagnoses must be
compiled into the kernel. Currently diag 14 can be called within the
vmur kernel module from addresses above 2GB. This leads to specification
exceptions. This patch moves diag10, diag14 and diag210 into the new
diag.c file.
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index eccac1c..d32c60d 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -24,6 +24,7 @@
#include <asm/s390_ext.h>
#include <asm/todclk.h>
#include <asm/vtoc.h>
+#include <asm/diag.h>
#include "dasd_int.h"
#include "dasd_diag.h"
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 4f2f81b..2edd5fb 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -21,6 +21,7 @@
#include <asm/ccwdev.h>
#include <asm/cio.h>
#include <asm/ebcdic.h>
+#include <asm/diag.h>
#include "raw3270.h"
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 04b19bd..2d96c95 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -14,6 +14,7 @@
#include <asm/cio.h>
#include <asm/ccwdev.h>
#include <asm/debug.h>
+#include <asm/diag.h>
#include "vmur.h"
@@ -379,31 +380,6 @@
return do_write(urf->urd, udata, count, urf->dev_reclen, ppos);
}
-static int do_diag_14(unsigned long rx, unsigned long ry1,
- unsigned long subcode)
-{
- register unsigned long _ry1 asm("2") = ry1;
- register unsigned long _ry2 asm("3") = subcode;
- int rc = 0;
-
- asm volatile(
-#ifdef CONFIG_64BIT
- " sam31\n"
- " diag %2,2,0x14\n"
- " sam64\n"
-#else
- " diag %2,2,0x14\n"
-#endif
- " ipm %0\n"
- " srl %0,28\n"
- : "=d" (rc), "+d" (_ry2)
- : "d" (rx), "d" (_ry1)
- : "cc");
-
- TRACE("diag 14: subcode=0x%lx, cc=%i\n", subcode, rc);
- return rc;
-}
-
/*
* diagnose code 0x14 subcode 0x0028 - position spool file to designated
* record
@@ -415,7 +391,7 @@
{
int cc;
- cc = do_diag_14(record, devno, 0x28);
+ cc = diag14(record, devno, 0x28);
switch (cc) {
case 0:
return 0;
@@ -440,7 +416,7 @@
{
int cc;
- cc = do_diag_14((unsigned long) buf, devno, 0x00);
+ cc = diag14((unsigned long) buf, devno, 0x00);
switch (cc) {
case 0:
return 0;
@@ -533,7 +509,7 @@
{
int cc;
- cc = do_diag_14((unsigned long) buf, spid, 0xfff);
+ cc = diag14((unsigned long) buf, spid, 0xfff);
switch (cc) {
case 0:
return 0;
diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c
index 60b9347..f232832 100644
--- a/drivers/s390/cio/device_id.c
+++ b/drivers/s390/cio/device_id.c
@@ -17,6 +17,7 @@
#include <asm/delay.h>
#include <asm/cio.h>
#include <asm/lowcore.h>
+#include <asm/diag.h>
#include "cio.h"
#include "cio_debug.h"
@@ -25,51 +26,6 @@
#include "ioasm.h"
/*
- * diag210 is used under VM to get information about a virtual device
- */
-int
-diag210(struct diag210 * addr)
-{
- /*
- * diag 210 needs its data below the 2GB border, so we
- * use a static data area to be sure
- */
- static struct diag210 diag210_tmp;
- static DEFINE_SPINLOCK(diag210_lock);
- unsigned long flags;
- int ccode;
-
- spin_lock_irqsave(&diag210_lock, flags);
- diag210_tmp = *addr;
-
-#ifdef CONFIG_64BIT
- asm volatile(
- " lhi %0,-1\n"
- " sam31\n"
- " diag %1,0,0x210\n"
- "0: ipm %0\n"
- " srl %0,28\n"
- "1: sam64\n"
- EX_TABLE(0b,1b)
- : "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
-#else
- asm volatile(
- " lhi %0,-1\n"
- " diag %1,0,0x210\n"
- "0: ipm %0\n"
- " srl %0,28\n"
- "1:\n"
- EX_TABLE(0b,1b)
- : "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
-#endif
-
- *addr = diag210_tmp;
- spin_unlock_irqrestore(&diag210_lock, flags);
-
- return ccode;
-}
-
-/*
* Input :
* devno - device number
* ps - pointer to sense ID data area
@@ -349,5 +305,3 @@
break;
}
}
-
-EXPORT_SYMBOL(diag210);