| /* | 
 |  * Architecture specific parts of the Floppy driver | 
 |  *   include/asm-i386/floppy.h | 
 |  * | 
 |  * This file is subject to the terms and conditions of the GNU General Public | 
 |  * License.  See the file "COPYING" in the main directory of this archive | 
 |  * for more details. | 
 |  * | 
 |  * Copyright (C) 1995 | 
 |  */ | 
 | #ifndef __ASM_SH_FLOPPY_H | 
 | #define __ASM_SH_FLOPPY_H | 
 |  | 
 | #include <linux/vmalloc.h> | 
 |  | 
 |  | 
 | /* | 
 |  * The DMA channel used by the floppy controller cannot access data at | 
 |  * addresses >= 16MB | 
 |  * | 
 |  * Went back to the 1MB limit, as some people had problems with the floppy | 
 |  * driver otherwise. It doesn't matter much for performance anyway, as most | 
 |  * floppy accesses go through the track buffer. | 
 |  */ | 
 | #define _CROSS_64KB(a,s,vdma) \ | 
 | (!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)) | 
 |  | 
 | #define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1) | 
 |  | 
 |  | 
 | #define SW fd_routine[use_virtual_dma&1] | 
 | #define CSW fd_routine[can_use_virtual_dma & 1] | 
 |  | 
 |  | 
 | #define fd_inb(port)			inb_p(port) | 
 | #define fd_outb(value,port)		outb_p(value,port) | 
 |  | 
 | #define fd_request_dma()        CSW._request_dma(FLOPPY_DMA,"floppy") | 
 | #define fd_free_dma()           CSW._free_dma(FLOPPY_DMA) | 
 | #define fd_enable_irq()         enable_irq(FLOPPY_IRQ) | 
 | #define fd_disable_irq()        disable_irq(FLOPPY_IRQ) | 
 | #define fd_free_irq()		free_irq(FLOPPY_IRQ, NULL) | 
 | #define fd_get_dma_residue()    SW._get_dma_residue(FLOPPY_DMA) | 
 | #define fd_dma_mem_alloc(size)	SW._dma_mem_alloc(size) | 
 | #define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io) | 
 |  | 
 | #define FLOPPY_CAN_FALLBACK_ON_NODMA | 
 |  | 
 | static int virtual_dma_count; | 
 | static int virtual_dma_residue; | 
 | static char *virtual_dma_addr; | 
 | static int virtual_dma_mode; | 
 | static int doing_pdma; | 
 |  | 
 | static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs) | 
 | { | 
 | 	register unsigned char st; | 
 |  | 
 | #undef TRACE_FLPY_INT | 
 |  | 
 | #ifdef TRACE_FLPY_INT | 
 | 	static int calls=0; | 
 | 	static int bytes=0; | 
 | 	static int dma_wait=0; | 
 | #endif | 
 | 	if(!doing_pdma) { | 
 | 		floppy_interrupt(irq, dev_id, regs); | 
 | 		return; | 
 | 	} | 
 |  | 
 | #ifdef TRACE_FLPY_INT | 
 | 	if(!calls) | 
 | 		bytes = virtual_dma_count; | 
 | #endif | 
 |  | 
 | 	{ | 
 | 		register int lcount; | 
 | 		register char *lptr; | 
 |  | 
 | 		st = 1; | 
 | 		for(lcount=virtual_dma_count, lptr=virtual_dma_addr;  | 
 | 		    lcount; lcount--, lptr++) { | 
 | 			st=inb(virtual_dma_port+4) & 0xa0 ; | 
 | 			if(st != 0xa0)  | 
 | 				break; | 
 | 			if(virtual_dma_mode) | 
 | 				outb_p(*lptr, virtual_dma_port+5); | 
 | 			else | 
 | 				*lptr = inb_p(virtual_dma_port+5); | 
 | 		} | 
 | 		virtual_dma_count = lcount; | 
 | 		virtual_dma_addr = lptr; | 
 | 		st = inb(virtual_dma_port+4); | 
 | 	} | 
 |  | 
 | #ifdef TRACE_FLPY_INT | 
 | 	calls++; | 
 | #endif | 
 | 	if(st == 0x20) | 
 | 		return; | 
 | 	if(!(st & 0x20)) { | 
 | 		virtual_dma_residue += virtual_dma_count; | 
 | 		virtual_dma_count=0; | 
 | #ifdef TRACE_FLPY_INT | 
 | 		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",  | 
 | 		       virtual_dma_count, virtual_dma_residue, calls, bytes, | 
 | 		       dma_wait); | 
 | 		calls = 0; | 
 | 		dma_wait=0; | 
 | #endif | 
 | 		doing_pdma = 0; | 
 | 		floppy_interrupt(irq, dev_id, regs); | 
 | 		return; | 
 | 	} | 
 | #ifdef TRACE_FLPY_INT | 
 | 	if(!virtual_dma_count) | 
 | 		dma_wait++; | 
 | #endif | 
 | } | 
 |  | 
 | static void fd_disable_dma(void) | 
 | { | 
 | 	if(! (can_use_virtual_dma & 1)) | 
 | 		disable_dma(FLOPPY_DMA); | 
 | 	doing_pdma = 0; | 
 | 	virtual_dma_residue += virtual_dma_count; | 
 | 	virtual_dma_count=0; | 
 | } | 
 |  | 
 | static int vdma_request_dma(unsigned int dmanr, const char * device_id) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void vdma_nop(unsigned int dummy) | 
 | { | 
 | } | 
 |  | 
 |  | 
 | static int vdma_get_dma_residue(unsigned int dummy) | 
 | { | 
 | 	return virtual_dma_count + virtual_dma_residue; | 
 | } | 
 |  | 
 |  | 
 | static int fd_request_irq(void) | 
 | { | 
 | 	if(can_use_virtual_dma) | 
 | 		return request_irq(FLOPPY_IRQ, floppy_hardint, | 
 | 				   IRQF_DISABLED, "floppy", NULL); | 
 | 	else | 
 | 		return request_irq(FLOPPY_IRQ, floppy_interrupt, | 
 | 				   IRQF_DISABLED, "floppy", NULL); | 
 | } | 
 |  | 
 | static unsigned long dma_mem_alloc(unsigned long size) | 
 | { | 
 | 	return __get_dma_pages(GFP_KERNEL,get_order(size)); | 
 | } | 
 |  | 
 |  | 
 | static unsigned long vdma_mem_alloc(unsigned long size) | 
 | { | 
 | 	return (unsigned long) vmalloc(size); | 
 |  | 
 | } | 
 |  | 
 | #define nodma_mem_alloc(size) vdma_mem_alloc(size) | 
 |  | 
 | static void _fd_dma_mem_free(unsigned long addr, unsigned long size) | 
 | { | 
 | 	if((unsigned int) addr >= (unsigned int) high_memory) | 
 | 		return vfree((void *)addr); | 
 | 	else | 
 | 		free_pages(addr, get_order(size));		 | 
 | } | 
 |  | 
 | #define fd_dma_mem_free(addr, size)  _fd_dma_mem_free(addr, size)  | 
 |  | 
 | static void _fd_chose_dma_mode(char *addr, unsigned long size) | 
 | { | 
 | 	if(can_use_virtual_dma == 2) { | 
 | 		if((unsigned int) addr >= (unsigned int) high_memory || | 
 | 		   virt_to_phys(addr) >= 0x10000000) | 
 | 			use_virtual_dma = 1; | 
 | 		else | 
 | 			use_virtual_dma = 0; | 
 | 	} else { | 
 | 		use_virtual_dma = can_use_virtual_dma & 1; | 
 | 	} | 
 | } | 
 |  | 
 | #define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size) | 
 |  | 
 |  | 
 | static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) | 
 | { | 
 | 	doing_pdma = 1; | 
 | 	virtual_dma_port = io; | 
 | 	virtual_dma_mode = (mode  == DMA_MODE_WRITE); | 
 | 	virtual_dma_addr = addr; | 
 | 	virtual_dma_count = size; | 
 | 	virtual_dma_residue = 0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) | 
 | { | 
 | #ifdef FLOPPY_SANITY_CHECK | 
 | 	if (CROSS_64KB(addr, size)) { | 
 | 		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size); | 
 | 		return -1; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	__flush_purge_region(addr, size); | 
 |  | 
 | 	/* actual, physical DMA */ | 
 | 	doing_pdma = 0; | 
 | 	clear_dma_ff(FLOPPY_DMA); | 
 | 	set_dma_mode(FLOPPY_DMA,mode); | 
 | 	set_dma_addr(FLOPPY_DMA,virt_to_phys(addr)); | 
 | 	set_dma_count(FLOPPY_DMA,size); | 
 | 	enable_dma(FLOPPY_DMA); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct fd_routine_l { | 
 | 	int (*_request_dma)(unsigned int dmanr, const char * device_id); | 
 | 	void (*_free_dma)(unsigned int dmanr); | 
 | 	int (*_get_dma_residue)(unsigned int dummy); | 
 | 	unsigned long (*_dma_mem_alloc) (unsigned long size); | 
 | 	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); | 
 | } fd_routine[] = { | 
 | 	{ | 
 | 		request_dma, | 
 | 		free_dma, | 
 | 		get_dma_residue, | 
 | 		dma_mem_alloc, | 
 | 		hard_dma_setup | 
 | 	}, | 
 | 	{ | 
 | 		vdma_request_dma, | 
 | 		vdma_nop, | 
 | 		vdma_get_dma_residue, | 
 | 		vdma_mem_alloc, | 
 | 		vdma_dma_setup | 
 | 	} | 
 | }; | 
 |  | 
 |  | 
 | static int FDC1 = 0x3f0; | 
 | static int FDC2 = -1; | 
 |  | 
 | /* | 
 |  * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock | 
 |  * is needed to prevent corrupted CMOS RAM in case "insmod floppy" | 
 |  * coincides with another rtc CMOS user.		Paul G. | 
 |  */ | 
 | #define FLOPPY0_TYPE	(4) | 
 | #define FLOPPY1_TYPE	(0) | 
 |  | 
 | #define N_FDC 2 | 
 | #define N_DRIVE 8 | 
 |  | 
 | #define EXTRA_FLOPPY_PARAMS | 
 |  | 
 | #endif /* __ASM_SH_FLOPPY_H */ |