DaVinci: DM365: Adding entries for DM365 IRQ's
This patch adds definitions for some DM365 IRQs that are used by
the codecs. Codecs will also use the IRQs.
Entries are being added to enable/disable IRQ's.
There is no use as such for these entires in the kernel itself.
Instead these will be used by the "linuxutils" package of the DVSDK.
For further information on IRQ muxing refer to
http://focus.ti.com/lit/ug/sprufg5a/sprufg5a.pdf
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index f8bac94..e815174 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -595,6 +595,14 @@
INT_CFG(DM365, INT_EMAC_RXPULSE, 15, 1, 1, false)
INT_CFG(DM365, INT_EMAC_TXPULSE, 16, 1, 1, false)
INT_CFG(DM365, INT_EMAC_MISCPULSE, 17, 1, 1, false)
+INT_CFG(DM365, INT_IMX0_ENABLE, 0, 1, 0, false)
+INT_CFG(DM365, INT_IMX0_DISABLE, 0, 1, 1, false)
+INT_CFG(DM365, INT_HDVICP_ENABLE, 0, 1, 1, false)
+INT_CFG(DM365, INT_HDVICP_DISABLE, 0, 1, 0, false)
+INT_CFG(DM365, INT_IMX1_ENABLE, 24, 1, 1, false)
+INT_CFG(DM365, INT_IMX1_DISABLE, 24, 1, 0, false)
+INT_CFG(DM365, INT_NSF_ENABLE, 25, 1, 1, false)
+INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false)
#endif
};
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 7f755cc..3c918a7 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -205,6 +205,9 @@
/* DaVinci DM365-specific Interrupts */
#define IRQ_DM365_INSFINT 7
+#define IRQ_DM365_IMXINT1 8
+#define IRQ_DM365_IMXINT0 10
+#define IRQ_DM365_KLD_ARMINT 10
#define IRQ_DM365_IMCOPINT 11
#define IRQ_DM365_RTOINT 13
#define IRQ_DM365_TINT5 14
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 7fad9b1..7732832 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -301,6 +301,14 @@
DM365_INT_EMAC_RXPULSE,
DM365_INT_EMAC_TXPULSE,
DM365_INT_EMAC_MISCPULSE,
+ DM365_INT_IMX0_ENABLE,
+ DM365_INT_IMX0_DISABLE,
+ DM365_INT_HDVICP_ENABLE,
+ DM365_INT_HDVICP_DISABLE,
+ DM365_INT_IMX1_ENABLE,
+ DM365_INT_IMX1_DISABLE,
+ DM365_INT_NSF_ENABLE,
+ DM365_INT_NSF_DISABLE,
/* EDMA event muxing */
DM365_EVT2_ASP_TX,