|  | /* | 
|  | * IBM Hot Plug Controller Driver | 
|  | * | 
|  | * Written By: Tong Yu, IBM Corporation | 
|  | * | 
|  | * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com) | 
|  | * Copyright (C) 2001-2003 IBM Corp. | 
|  | * | 
|  | * All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or (at | 
|  | * your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | 
|  | * NON INFRINGEMENT.  See the GNU General Public License for more | 
|  | * details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | * Send feedback to <gregkh@us.ibm.com> | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/init.h> | 
|  | #include "ibmphp.h" | 
|  |  | 
|  | /* | 
|  | * POST builds data blocks(in this data block definition, a char-1 | 
|  | * byte, short(or word)-2 byte, long(dword)-4 byte) in the Extended | 
|  | * BIOS Data Area which describe the configuration of the hot-plug | 
|  | * controllers and resources used by the PCI Hot-Plug devices. | 
|  | * | 
|  | * This file walks EBDA, maps data block from physical addr, | 
|  | * reconstruct linked lists about all system resource(MEM, PFM, IO) | 
|  | * already assigned by POST, as well as linked lists about hot plug | 
|  | * controllers (ctlr#, slot#, bus&slot features...) | 
|  | */ | 
|  |  | 
|  | /* Global lists */ | 
|  | LIST_HEAD (ibmphp_ebda_pci_rsrc_head); | 
|  | LIST_HEAD (ibmphp_slot_head); | 
|  |  | 
|  | /* Local variables */ | 
|  | static struct ebda_hpc_list *hpc_list_ptr; | 
|  | static struct ebda_rsrc_list *rsrc_list_ptr; | 
|  | static struct rio_table_hdr *rio_table_ptr = NULL; | 
|  | static LIST_HEAD (ebda_hpc_head); | 
|  | static LIST_HEAD (bus_info_head); | 
|  | static LIST_HEAD (rio_vg_head); | 
|  | static LIST_HEAD (rio_lo_head); | 
|  | static LIST_HEAD (opt_vg_head); | 
|  | static LIST_HEAD (opt_lo_head); | 
|  | static void __iomem *io_mem; | 
|  |  | 
|  | /* Local functions */ | 
|  | static int ebda_rsrc_controller (void); | 
|  | static int ebda_rsrc_rsrc (void); | 
|  | static int ebda_rio_table (void); | 
|  |  | 
|  | static struct ebda_hpc_list * __init alloc_ebda_hpc_list (void) | 
|  | { | 
|  | return kzalloc(sizeof(struct ebda_hpc_list), GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | static struct controller *alloc_ebda_hpc (u32 slot_count, u32 bus_count) | 
|  | { | 
|  | struct controller *controller; | 
|  | struct ebda_hpc_slot *slots; | 
|  | struct ebda_hpc_bus *buses; | 
|  |  | 
|  | controller = kzalloc(sizeof(struct controller), GFP_KERNEL); | 
|  | if (!controller) | 
|  | goto error; | 
|  |  | 
|  | slots = kcalloc(slot_count, sizeof(struct ebda_hpc_slot), GFP_KERNEL); | 
|  | if (!slots) | 
|  | goto error_contr; | 
|  | controller->slots = slots; | 
|  |  | 
|  | buses = kcalloc(bus_count, sizeof(struct ebda_hpc_bus), GFP_KERNEL); | 
|  | if (!buses) | 
|  | goto error_slots; | 
|  | controller->buses = buses; | 
|  |  | 
|  | return controller; | 
|  | error_slots: | 
|  | kfree(controller->slots); | 
|  | error_contr: | 
|  | kfree(controller); | 
|  | error: | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void free_ebda_hpc (struct controller *controller) | 
|  | { | 
|  | kfree (controller->slots); | 
|  | kfree (controller->buses); | 
|  | kfree (controller); | 
|  | } | 
|  |  | 
|  | static struct ebda_rsrc_list * __init alloc_ebda_rsrc_list (void) | 
|  | { | 
|  | return kzalloc(sizeof(struct ebda_rsrc_list), GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | static struct ebda_pci_rsrc *alloc_ebda_pci_rsrc (void) | 
|  | { | 
|  | return kzalloc(sizeof(struct ebda_pci_rsrc), GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | static void __init print_bus_info (void) | 
|  | { | 
|  | struct bus_info *ptr; | 
|  | struct list_head *ptr1; | 
|  |  | 
|  | list_for_each (ptr1, &bus_info_head) { | 
|  | ptr = list_entry (ptr1, struct bus_info, bus_info_list); | 
|  | debug ("%s - slot_min = %x\n", __FUNCTION__, ptr->slot_min); | 
|  | debug ("%s - slot_max = %x\n", __FUNCTION__, ptr->slot_max); | 
|  | debug ("%s - slot_count = %x\n", __FUNCTION__, ptr->slot_count); | 
|  | debug ("%s - bus# = %x\n", __FUNCTION__, ptr->busno); | 
|  | debug ("%s - current_speed = %x\n", __FUNCTION__, ptr->current_speed); | 
|  | debug ("%s - controller_id = %x\n", __FUNCTION__, ptr->controller_id); | 
|  |  | 
|  | debug ("%s - slots_at_33_conv = %x\n", __FUNCTION__, ptr->slots_at_33_conv); | 
|  | debug ("%s - slots_at_66_conv = %x\n", __FUNCTION__, ptr->slots_at_66_conv); | 
|  | debug ("%s - slots_at_66_pcix = %x\n", __FUNCTION__, ptr->slots_at_66_pcix); | 
|  | debug ("%s - slots_at_100_pcix = %x\n", __FUNCTION__, ptr->slots_at_100_pcix); | 
|  | debug ("%s - slots_at_133_pcix = %x\n", __FUNCTION__, ptr->slots_at_133_pcix); | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | static void print_lo_info (void) | 
|  | { | 
|  | struct rio_detail *ptr; | 
|  | struct list_head *ptr1; | 
|  | debug ("print_lo_info ----\n"); | 
|  | list_for_each (ptr1, &rio_lo_head) { | 
|  | ptr = list_entry (ptr1, struct rio_detail, rio_detail_list); | 
|  | debug ("%s - rio_node_id = %x\n", __FUNCTION__, ptr->rio_node_id); | 
|  | debug ("%s - rio_type = %x\n", __FUNCTION__, ptr->rio_type); | 
|  | debug ("%s - owner_id = %x\n", __FUNCTION__, ptr->owner_id); | 
|  | debug ("%s - first_slot_num = %x\n", __FUNCTION__, ptr->first_slot_num); | 
|  | debug ("%s - wpindex = %x\n", __FUNCTION__, ptr->wpindex); | 
|  | debug ("%s - chassis_num = %x\n", __FUNCTION__, ptr->chassis_num); | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | static void print_vg_info (void) | 
|  | { | 
|  | struct rio_detail *ptr; | 
|  | struct list_head *ptr1; | 
|  | debug ("%s ---\n", __FUNCTION__); | 
|  | list_for_each (ptr1, &rio_vg_head) { | 
|  | ptr = list_entry (ptr1, struct rio_detail, rio_detail_list); | 
|  | debug ("%s - rio_node_id = %x\n", __FUNCTION__, ptr->rio_node_id); | 
|  | debug ("%s - rio_type = %x\n", __FUNCTION__, ptr->rio_type); | 
|  | debug ("%s - owner_id = %x\n", __FUNCTION__, ptr->owner_id); | 
|  | debug ("%s - first_slot_num = %x\n", __FUNCTION__, ptr->first_slot_num); | 
|  | debug ("%s - wpindex = %x\n", __FUNCTION__, ptr->wpindex); | 
|  | debug ("%s - chassis_num = %x\n", __FUNCTION__, ptr->chassis_num); | 
|  |  | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __init print_ebda_pci_rsrc (void) | 
|  | { | 
|  | struct ebda_pci_rsrc *ptr; | 
|  | struct list_head *ptr1; | 
|  |  | 
|  | list_for_each (ptr1, &ibmphp_ebda_pci_rsrc_head) { | 
|  | ptr = list_entry (ptr1, struct ebda_pci_rsrc, ebda_pci_rsrc_list); | 
|  | debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n", | 
|  | __FUNCTION__, ptr->rsrc_type ,ptr->bus_num, ptr->dev_fun,ptr->start_addr, ptr->end_addr); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __init print_ibm_slot (void) | 
|  | { | 
|  | struct slot *ptr; | 
|  | struct list_head *ptr1; | 
|  |  | 
|  | list_for_each (ptr1, &ibmphp_slot_head) { | 
|  | ptr = list_entry (ptr1, struct slot, ibm_slot_list); | 
|  | debug ("%s - slot_number: %x\n", __FUNCTION__, ptr->number); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __init print_opt_vg (void) | 
|  | { | 
|  | struct opt_rio *ptr; | 
|  | struct list_head *ptr1; | 
|  | debug ("%s ---\n", __FUNCTION__); | 
|  | list_for_each (ptr1, &opt_vg_head) { | 
|  | ptr = list_entry (ptr1, struct opt_rio, opt_rio_list); | 
|  | debug ("%s - rio_type %x\n", __FUNCTION__, ptr->rio_type); | 
|  | debug ("%s - chassis_num: %x\n", __FUNCTION__, ptr->chassis_num); | 
|  | debug ("%s - first_slot_num: %x\n", __FUNCTION__, ptr->first_slot_num); | 
|  | debug ("%s - middle_num: %x\n", __FUNCTION__, ptr->middle_num); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void __init print_ebda_hpc (void) | 
|  | { | 
|  | struct controller *hpc_ptr; | 
|  | struct list_head *ptr1; | 
|  | u16 index; | 
|  |  | 
|  | list_for_each (ptr1, &ebda_hpc_head) { | 
|  |  | 
|  | hpc_ptr = list_entry (ptr1, struct controller, ebda_hpc_list); | 
|  |  | 
|  | for (index = 0; index < hpc_ptr->slot_count; index++) { | 
|  | debug ("%s - physical slot#: %x\n", __FUNCTION__, hpc_ptr->slots[index].slot_num); | 
|  | debug ("%s - pci bus# of the slot: %x\n", __FUNCTION__, hpc_ptr->slots[index].slot_bus_num); | 
|  | debug ("%s - index into ctlr addr: %x\n", __FUNCTION__, hpc_ptr->slots[index].ctl_index); | 
|  | debug ("%s - cap of the slot: %x\n", __FUNCTION__, hpc_ptr->slots[index].slot_cap); | 
|  | } | 
|  |  | 
|  | for (index = 0; index < hpc_ptr->bus_count; index++) { | 
|  | debug ("%s - bus# of each bus controlled by this ctlr: %x\n", __FUNCTION__, hpc_ptr->buses[index].bus_num); | 
|  | } | 
|  |  | 
|  | debug ("%s - type of hpc: %x\n", __FUNCTION__, hpc_ptr->ctlr_type); | 
|  | switch (hpc_ptr->ctlr_type) { | 
|  | case 1: | 
|  | debug ("%s - bus: %x\n", __FUNCTION__, hpc_ptr->u.pci_ctlr.bus); | 
|  | debug ("%s - dev_fun: %x\n", __FUNCTION__, hpc_ptr->u.pci_ctlr.dev_fun); | 
|  | debug ("%s - irq: %x\n", __FUNCTION__, hpc_ptr->irq); | 
|  | break; | 
|  |  | 
|  | case 0: | 
|  | debug ("%s - io_start: %x\n", __FUNCTION__, hpc_ptr->u.isa_ctlr.io_start); | 
|  | debug ("%s - io_end: %x\n", __FUNCTION__, hpc_ptr->u.isa_ctlr.io_end); | 
|  | debug ("%s - irq: %x\n", __FUNCTION__, hpc_ptr->irq); | 
|  | break; | 
|  |  | 
|  | case 2: | 
|  | case 4: | 
|  | debug ("%s - wpegbbar: %lx\n", __FUNCTION__, hpc_ptr->u.wpeg_ctlr.wpegbbar); | 
|  | debug ("%s - i2c_addr: %x\n", __FUNCTION__, hpc_ptr->u.wpeg_ctlr.i2c_addr); | 
|  | debug ("%s - irq: %x\n", __FUNCTION__, hpc_ptr->irq); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | int __init ibmphp_access_ebda (void) | 
|  | { | 
|  | u8 format, num_ctlrs, rio_complete, hs_complete; | 
|  | u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base; | 
|  | int rc = 0; | 
|  |  | 
|  |  | 
|  | rio_complete = 0; | 
|  | hs_complete = 0; | 
|  |  | 
|  | io_mem = ioremap ((0x40 << 4) + 0x0e, 2); | 
|  | if (!io_mem ) | 
|  | return -ENOMEM; | 
|  | ebda_seg = readw (io_mem); | 
|  | iounmap (io_mem); | 
|  | debug ("returned ebda segment: %x\n", ebda_seg); | 
|  |  | 
|  | io_mem = ioremap (ebda_seg<<4, 65000); | 
|  | if (!io_mem ) | 
|  | return -ENOMEM; | 
|  | next_offset = 0x180; | 
|  |  | 
|  | for (;;) { | 
|  | offset = next_offset; | 
|  | next_offset = readw (io_mem + offset);	/* offset of next blk */ | 
|  |  | 
|  | offset += 2; | 
|  | if (next_offset == 0)	/* 0 indicate it's last blk */ | 
|  | break; | 
|  | blk_id = readw (io_mem + offset);	/* this blk id */ | 
|  |  | 
|  | offset += 2; | 
|  | /* check if it is hot swap block or rio block */ | 
|  | if (blk_id != 0x4853 && blk_id != 0x4752) | 
|  | continue; | 
|  | /* found hs table */ | 
|  | if (blk_id == 0x4853) { | 
|  | debug ("now enter hot swap block---\n"); | 
|  | debug ("hot blk id: %x\n", blk_id); | 
|  | format = readb (io_mem + offset); | 
|  |  | 
|  | offset += 1; | 
|  | if (format != 4) | 
|  | goto error_nodev; | 
|  | debug ("hot blk format: %x\n", format); | 
|  | /* hot swap sub blk */ | 
|  | base = offset; | 
|  |  | 
|  | sub_addr = base; | 
|  | re = readw (io_mem + sub_addr);	/* next sub blk */ | 
|  |  | 
|  | sub_addr += 2; | 
|  | rc_id = readw (io_mem + sub_addr); 	/* sub blk id */ | 
|  |  | 
|  | sub_addr += 2; | 
|  | if (rc_id != 0x5243) | 
|  | goto error_nodev; | 
|  | /* rc sub blk signature  */ | 
|  | num_ctlrs = readb (io_mem + sub_addr); | 
|  |  | 
|  | sub_addr += 1; | 
|  | hpc_list_ptr = alloc_ebda_hpc_list (); | 
|  | if (!hpc_list_ptr) { | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | hpc_list_ptr->format = format; | 
|  | hpc_list_ptr->num_ctlrs = num_ctlrs; | 
|  | hpc_list_ptr->phys_addr = sub_addr;	/*  offset of RSRC_CONTROLLER blk */ | 
|  | debug ("info about hpc descriptor---\n"); | 
|  | debug ("hot blk format: %x\n", format); | 
|  | debug ("num of controller: %x\n", num_ctlrs); | 
|  | debug ("offset of hpc data structure enteries: %x\n ", sub_addr); | 
|  |  | 
|  | sub_addr = base + re;	/* re sub blk */ | 
|  | /* FIXME: rc is never used/checked */ | 
|  | rc = readw (io_mem + sub_addr);	/* next sub blk */ | 
|  |  | 
|  | sub_addr += 2; | 
|  | re_id = readw (io_mem + sub_addr);	/* sub blk id */ | 
|  |  | 
|  | sub_addr += 2; | 
|  | if (re_id != 0x5245) | 
|  | goto error_nodev; | 
|  |  | 
|  | /* signature of re */ | 
|  | num_entries = readw (io_mem + sub_addr); | 
|  |  | 
|  | sub_addr += 2;	/* offset of RSRC_ENTRIES blk */ | 
|  | rsrc_list_ptr = alloc_ebda_rsrc_list (); | 
|  | if (!rsrc_list_ptr ) { | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | rsrc_list_ptr->format = format; | 
|  | rsrc_list_ptr->num_entries = num_entries; | 
|  | rsrc_list_ptr->phys_addr = sub_addr; | 
|  |  | 
|  | debug ("info about rsrc descriptor---\n"); | 
|  | debug ("format: %x\n", format); | 
|  | debug ("num of rsrc: %x\n", num_entries); | 
|  | debug ("offset of rsrc data structure enteries: %x\n ", sub_addr); | 
|  |  | 
|  | hs_complete = 1; | 
|  | } else { | 
|  | /* found rio table, blk_id == 0x4752 */ | 
|  | debug ("now enter io table ---\n"); | 
|  | debug ("rio blk id: %x\n", blk_id); | 
|  |  | 
|  | rio_table_ptr = kzalloc(sizeof(struct rio_table_hdr), GFP_KERNEL); | 
|  | if (!rio_table_ptr) | 
|  | return -ENOMEM; | 
|  | rio_table_ptr->ver_num = readb (io_mem + offset); | 
|  | rio_table_ptr->scal_count = readb (io_mem + offset + 1); | 
|  | rio_table_ptr->riodev_count = readb (io_mem + offset + 2); | 
|  | rio_table_ptr->offset = offset +3 ; | 
|  |  | 
|  | debug("info about rio table hdr ---\n"); | 
|  | debug("ver_num: %x\nscal_count: %x\nriodev_count: %x\noffset of rio table: %x\n ", | 
|  | rio_table_ptr->ver_num, rio_table_ptr->scal_count, | 
|  | rio_table_ptr->riodev_count, rio_table_ptr->offset); | 
|  |  | 
|  | rio_complete = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!hs_complete && !rio_complete) | 
|  | goto error_nodev; | 
|  |  | 
|  | if (rio_table_ptr) { | 
|  | if (rio_complete && rio_table_ptr->ver_num == 3) { | 
|  | rc = ebda_rio_table (); | 
|  | if (rc) | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | rc = ebda_rsrc_controller (); | 
|  | if (rc) | 
|  | goto out; | 
|  |  | 
|  | rc = ebda_rsrc_rsrc (); | 
|  | goto out; | 
|  | error_nodev: | 
|  | rc = -ENODEV; | 
|  | out: | 
|  | iounmap (io_mem); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * map info of scalability details and rio details from physical address | 
|  | */ | 
|  | static int __init ebda_rio_table (void) | 
|  | { | 
|  | u16 offset; | 
|  | u8 i; | 
|  | struct rio_detail *rio_detail_ptr; | 
|  |  | 
|  | offset = rio_table_ptr->offset; | 
|  | offset += 12 * rio_table_ptr->scal_count; | 
|  |  | 
|  | // we do concern about rio details | 
|  | for (i = 0; i < rio_table_ptr->riodev_count; i++) { | 
|  | rio_detail_ptr = kzalloc(sizeof(struct rio_detail), GFP_KERNEL); | 
|  | if (!rio_detail_ptr) | 
|  | return -ENOMEM; | 
|  | rio_detail_ptr->rio_node_id = readb (io_mem + offset); | 
|  | rio_detail_ptr->bbar = readl (io_mem + offset + 1); | 
|  | rio_detail_ptr->rio_type = readb (io_mem + offset + 5); | 
|  | rio_detail_ptr->owner_id = readb (io_mem + offset + 6); | 
|  | rio_detail_ptr->port0_node_connect = readb (io_mem + offset + 7); | 
|  | rio_detail_ptr->port0_port_connect = readb (io_mem + offset + 8); | 
|  | rio_detail_ptr->port1_node_connect = readb (io_mem + offset + 9); | 
|  | rio_detail_ptr->port1_port_connect = readb (io_mem + offset + 10); | 
|  | rio_detail_ptr->first_slot_num = readb (io_mem + offset + 11); | 
|  | rio_detail_ptr->status = readb (io_mem + offset + 12); | 
|  | rio_detail_ptr->wpindex = readb (io_mem + offset + 13); | 
|  | rio_detail_ptr->chassis_num = readb (io_mem + offset + 14); | 
|  | //		debug ("rio_node_id: %x\nbbar: %x\nrio_type: %x\nowner_id: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nfirst_slot_num: %x\nstatus: %x\n", rio_detail_ptr->rio_node_id, rio_detail_ptr->bbar, rio_detail_ptr->rio_type, rio_detail_ptr->owner_id, rio_detail_ptr->port0_node_connect, rio_detail_ptr->port0_port_connect, rio_detail_ptr->port1_node_connect, rio_detail_ptr->port1_port_connect, rio_detail_ptr->first_slot_num, rio_detail_ptr->status); | 
|  | //create linked list of chassis | 
|  | if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5) | 
|  | list_add (&rio_detail_ptr->rio_detail_list, &rio_vg_head); | 
|  | //create linked list of expansion box | 
|  | else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7) | 
|  | list_add (&rio_detail_ptr->rio_detail_list, &rio_lo_head); | 
|  | else | 
|  | // not in my concern | 
|  | kfree (rio_detail_ptr); | 
|  | offset += 15; | 
|  | } | 
|  | print_lo_info (); | 
|  | print_vg_info (); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * reorganizing linked list of chassis | 
|  | */ | 
|  | static struct opt_rio *search_opt_vg (u8 chassis_num) | 
|  | { | 
|  | struct opt_rio *ptr; | 
|  | struct list_head *ptr1; | 
|  | list_for_each (ptr1, &opt_vg_head) { | 
|  | ptr = list_entry (ptr1, struct opt_rio, opt_rio_list); | 
|  | if (ptr->chassis_num == chassis_num) | 
|  | return ptr; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int __init combine_wpg_for_chassis (void) | 
|  | { | 
|  | struct opt_rio *opt_rio_ptr = NULL; | 
|  | struct rio_detail *rio_detail_ptr = NULL; | 
|  | struct list_head *list_head_ptr = NULL; | 
|  |  | 
|  | list_for_each (list_head_ptr, &rio_vg_head) { | 
|  | rio_detail_ptr = list_entry (list_head_ptr, struct rio_detail, rio_detail_list); | 
|  | opt_rio_ptr = search_opt_vg (rio_detail_ptr->chassis_num); | 
|  | if (!opt_rio_ptr) { | 
|  | opt_rio_ptr = kzalloc(sizeof(struct opt_rio), GFP_KERNEL); | 
|  | if (!opt_rio_ptr) | 
|  | return -ENOMEM; | 
|  | opt_rio_ptr->rio_type = rio_detail_ptr->rio_type; | 
|  | opt_rio_ptr->chassis_num = rio_detail_ptr->chassis_num; | 
|  | opt_rio_ptr->first_slot_num = rio_detail_ptr->first_slot_num; | 
|  | opt_rio_ptr->middle_num = rio_detail_ptr->first_slot_num; | 
|  | list_add (&opt_rio_ptr->opt_rio_list, &opt_vg_head); | 
|  | } else { | 
|  | opt_rio_ptr->first_slot_num = min (opt_rio_ptr->first_slot_num, rio_detail_ptr->first_slot_num); | 
|  | opt_rio_ptr->middle_num = max (opt_rio_ptr->middle_num, rio_detail_ptr->first_slot_num); | 
|  | } | 
|  | } | 
|  | print_opt_vg (); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * reorgnizing linked list of expansion box | 
|  | */ | 
|  | static struct opt_rio_lo *search_opt_lo (u8 chassis_num) | 
|  | { | 
|  | struct opt_rio_lo *ptr; | 
|  | struct list_head *ptr1; | 
|  | list_for_each (ptr1, &opt_lo_head) { | 
|  | ptr = list_entry (ptr1, struct opt_rio_lo, opt_rio_lo_list); | 
|  | if (ptr->chassis_num == chassis_num) | 
|  | return ptr; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int combine_wpg_for_expansion (void) | 
|  | { | 
|  | struct opt_rio_lo *opt_rio_lo_ptr = NULL; | 
|  | struct rio_detail *rio_detail_ptr = NULL; | 
|  | struct list_head *list_head_ptr = NULL; | 
|  |  | 
|  | list_for_each (list_head_ptr, &rio_lo_head) { | 
|  | rio_detail_ptr = list_entry (list_head_ptr, struct rio_detail, rio_detail_list); | 
|  | opt_rio_lo_ptr = search_opt_lo (rio_detail_ptr->chassis_num); | 
|  | if (!opt_rio_lo_ptr) { | 
|  | opt_rio_lo_ptr = kzalloc(sizeof(struct opt_rio_lo), GFP_KERNEL); | 
|  | if (!opt_rio_lo_ptr) | 
|  | return -ENOMEM; | 
|  | opt_rio_lo_ptr->rio_type = rio_detail_ptr->rio_type; | 
|  | opt_rio_lo_ptr->chassis_num = rio_detail_ptr->chassis_num; | 
|  | opt_rio_lo_ptr->first_slot_num = rio_detail_ptr->first_slot_num; | 
|  | opt_rio_lo_ptr->middle_num = rio_detail_ptr->first_slot_num; | 
|  | opt_rio_lo_ptr->pack_count = 1; | 
|  |  | 
|  | list_add (&opt_rio_lo_ptr->opt_rio_lo_list, &opt_lo_head); | 
|  | } else { | 
|  | opt_rio_lo_ptr->first_slot_num = min (opt_rio_lo_ptr->first_slot_num, rio_detail_ptr->first_slot_num); | 
|  | opt_rio_lo_ptr->middle_num = max (opt_rio_lo_ptr->middle_num, rio_detail_ptr->first_slot_num); | 
|  | opt_rio_lo_ptr->pack_count = 2; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* Since we don't know the max slot number per each chassis, hence go | 
|  | * through the list of all chassis to find out the range | 
|  | * Arguments: slot_num, 1st slot number of the chassis we think we are on, | 
|  | * var (0 = chassis, 1 = expansion box) | 
|  | */ | 
|  | static int first_slot_num (u8 slot_num, u8 first_slot, u8 var) | 
|  | { | 
|  | struct opt_rio *opt_vg_ptr = NULL; | 
|  | struct opt_rio_lo *opt_lo_ptr = NULL; | 
|  | struct list_head *ptr = NULL; | 
|  | int rc = 0; | 
|  |  | 
|  | if (!var) { | 
|  | list_for_each (ptr, &opt_vg_head) { | 
|  | opt_vg_ptr = list_entry (ptr, struct opt_rio, opt_rio_list); | 
|  | if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) { | 
|  | rc = -ENODEV; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } else { | 
|  | list_for_each (ptr, &opt_lo_head) { | 
|  | opt_lo_ptr = list_entry (ptr, struct opt_rio_lo, opt_rio_lo_list); | 
|  | if ((first_slot < opt_lo_ptr->first_slot_num) && (slot_num >= opt_lo_ptr->first_slot_num)) { | 
|  | rc = -ENODEV; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static struct opt_rio_lo * find_rxe_num (u8 slot_num) | 
|  | { | 
|  | struct opt_rio_lo *opt_lo_ptr; | 
|  | struct list_head *ptr; | 
|  |  | 
|  | list_for_each (ptr, &opt_lo_head) { | 
|  | opt_lo_ptr = list_entry (ptr, struct opt_rio_lo, opt_rio_lo_list); | 
|  | //check to see if this slot_num belongs to expansion box | 
|  | if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1))) | 
|  | return opt_lo_ptr; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static struct opt_rio * find_chassis_num (u8 slot_num) | 
|  | { | 
|  | struct opt_rio *opt_vg_ptr; | 
|  | struct list_head *ptr; | 
|  |  | 
|  | list_for_each (ptr, &opt_vg_head) { | 
|  | opt_vg_ptr = list_entry (ptr, struct opt_rio, opt_rio_list); | 
|  | //check to see if this slot_num belongs to chassis | 
|  | if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0))) | 
|  | return opt_vg_ptr; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* This routine will find out how many slots are in the chassis, so that | 
|  | * the slot numbers for rxe100 would start from 1, and not from 7, or 6 etc | 
|  | */ | 
|  | static u8 calculate_first_slot (u8 slot_num) | 
|  | { | 
|  | u8 first_slot = 1; | 
|  | struct list_head * list; | 
|  | struct slot * slot_cur; | 
|  |  | 
|  | list_for_each (list, &ibmphp_slot_head) { | 
|  | slot_cur = list_entry (list, struct slot, ibm_slot_list); | 
|  | if (slot_cur->ctrl) { | 
|  | if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num)) | 
|  | first_slot = slot_cur->ctrl->ending_slot_num; | 
|  | } | 
|  | } | 
|  | return first_slot + 1; | 
|  |  | 
|  | } | 
|  | static char *create_file_name (struct slot * slot_cur) | 
|  | { | 
|  | struct opt_rio *opt_vg_ptr = NULL; | 
|  | struct opt_rio_lo *opt_lo_ptr = NULL; | 
|  | static char str[30]; | 
|  | int which = 0; /* rxe = 1, chassis = 0 */ | 
|  | u8 number = 1; /* either chassis or rxe # */ | 
|  | u8 first_slot = 1; | 
|  | u8 slot_num; | 
|  | u8 flag = 0; | 
|  |  | 
|  | if (!slot_cur) { | 
|  | err ("Structure passed is empty\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | slot_num = slot_cur->number; | 
|  |  | 
|  | memset (str, 0, sizeof(str)); | 
|  |  | 
|  | if (rio_table_ptr) { | 
|  | if (rio_table_ptr->ver_num == 3) { | 
|  | opt_vg_ptr = find_chassis_num (slot_num); | 
|  | opt_lo_ptr = find_rxe_num (slot_num); | 
|  | } | 
|  | } | 
|  | if (opt_vg_ptr) { | 
|  | if (opt_lo_ptr) { | 
|  | if ((slot_num - opt_vg_ptr->first_slot_num) > (slot_num - opt_lo_ptr->first_slot_num)) { | 
|  | number = opt_lo_ptr->chassis_num; | 
|  | first_slot = opt_lo_ptr->first_slot_num; | 
|  | which = 1; /* it is RXE */ | 
|  | } else { | 
|  | first_slot = opt_vg_ptr->first_slot_num; | 
|  | number = opt_vg_ptr->chassis_num; | 
|  | which = 0; | 
|  | } | 
|  | } else { | 
|  | first_slot = opt_vg_ptr->first_slot_num; | 
|  | number = opt_vg_ptr->chassis_num; | 
|  | which = 0; | 
|  | } | 
|  | ++flag; | 
|  | } else if (opt_lo_ptr) { | 
|  | number = opt_lo_ptr->chassis_num; | 
|  | first_slot = opt_lo_ptr->first_slot_num; | 
|  | which = 1; | 
|  | ++flag; | 
|  | } else if (rio_table_ptr) { | 
|  | if (rio_table_ptr->ver_num == 3) { | 
|  | /* if both NULL and we DO have correct RIO table in BIOS */ | 
|  | return NULL; | 
|  | } | 
|  | } | 
|  | if (!flag) { | 
|  | if (slot_cur->ctrl->ctlr_type == 4) { | 
|  | first_slot = calculate_first_slot (slot_num); | 
|  | which = 1; | 
|  | } else { | 
|  | which = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | sprintf(str, "%s%dslot%d", | 
|  | which == 0 ? "chassis" : "rxe", | 
|  | number, slot_num - first_slot + 1); | 
|  | return str; | 
|  | } | 
|  |  | 
|  | static int fillslotinfo(struct hotplug_slot *hotplug_slot) | 
|  | { | 
|  | struct slot *slot; | 
|  | int rc = 0; | 
|  |  | 
|  | if (!hotplug_slot || !hotplug_slot->private) | 
|  | return -EINVAL; | 
|  |  | 
|  | slot = hotplug_slot->private; | 
|  | rc = ibmphp_hpc_readslot(slot, READ_ALLSTAT, NULL); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | // power - enabled:1  not:0 | 
|  | hotplug_slot->info->power_status = SLOT_POWER(slot->status); | 
|  |  | 
|  | // attention - off:0, on:1, blinking:2 | 
|  | hotplug_slot->info->attention_status = SLOT_ATTN(slot->status, slot->ext_status); | 
|  |  | 
|  | // latch - open:1 closed:0 | 
|  | hotplug_slot->info->latch_status = SLOT_LATCH(slot->status); | 
|  |  | 
|  | // pci board - present:1 not:0 | 
|  | if (SLOT_PRESENT (slot->status)) | 
|  | hotplug_slot->info->adapter_status = 1; | 
|  | else | 
|  | hotplug_slot->info->adapter_status = 0; | 
|  | /* | 
|  | if (slot->bus_on->supported_bus_mode | 
|  | && (slot->bus_on->supported_speed == BUS_SPEED_66)) | 
|  | hotplug_slot->info->max_bus_speed_status = BUS_SPEED_66PCIX; | 
|  | else | 
|  | hotplug_slot->info->max_bus_speed_status = slot->bus_on->supported_speed; | 
|  | */ | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void release_slot(struct hotplug_slot *hotplug_slot) | 
|  | { | 
|  | struct slot *slot; | 
|  |  | 
|  | if (!hotplug_slot || !hotplug_slot->private) | 
|  | return; | 
|  |  | 
|  | slot = hotplug_slot->private; | 
|  | kfree(slot->hotplug_slot->info); | 
|  | kfree(slot->hotplug_slot->name); | 
|  | kfree(slot->hotplug_slot); | 
|  | slot->ctrl = NULL; | 
|  | slot->bus_on = NULL; | 
|  |  | 
|  | /* we don't want to actually remove the resources, since free_resources will do just that */ | 
|  | ibmphp_unconfigure_card(&slot, -1); | 
|  |  | 
|  | kfree (slot); | 
|  | } | 
|  |  | 
|  | static struct pci_driver ibmphp_driver; | 
|  |  | 
|  | /* | 
|  | * map info (ctlr-id, slot count, slot#.. bus count, bus#, ctlr type...) of | 
|  | * each hpc from physical address to a list of hot plug controllers based on | 
|  | * hpc descriptors. | 
|  | */ | 
|  | static int __init ebda_rsrc_controller (void) | 
|  | { | 
|  | u16 addr, addr_slot, addr_bus; | 
|  | u8 ctlr_id, temp, bus_index; | 
|  | u16 ctlr, slot, bus; | 
|  | u16 slot_num, bus_num, index; | 
|  | struct hotplug_slot *hp_slot_ptr; | 
|  | struct controller *hpc_ptr; | 
|  | struct ebda_hpc_bus *bus_ptr; | 
|  | struct ebda_hpc_slot *slot_ptr; | 
|  | struct bus_info *bus_info_ptr1, *bus_info_ptr2; | 
|  | int rc; | 
|  | struct slot *tmp_slot; | 
|  | struct list_head *list; | 
|  |  | 
|  | addr = hpc_list_ptr->phys_addr; | 
|  | for (ctlr = 0; ctlr < hpc_list_ptr->num_ctlrs; ctlr++) { | 
|  | bus_index = 1; | 
|  | ctlr_id = readb (io_mem + addr); | 
|  | addr += 1; | 
|  | slot_num = readb (io_mem + addr); | 
|  |  | 
|  | addr += 1; | 
|  | addr_slot = addr;	/* offset of slot structure */ | 
|  | addr += (slot_num * 4); | 
|  |  | 
|  | bus_num = readb (io_mem + addr); | 
|  |  | 
|  | addr += 1; | 
|  | addr_bus = addr;	/* offset of bus */ | 
|  | addr += (bus_num * 9);	/* offset of ctlr_type */ | 
|  | temp = readb (io_mem + addr); | 
|  |  | 
|  | addr += 1; | 
|  | /* init hpc structure */ | 
|  | hpc_ptr = alloc_ebda_hpc (slot_num, bus_num); | 
|  | if (!hpc_ptr ) { | 
|  | rc = -ENOMEM; | 
|  | goto error_no_hpc; | 
|  | } | 
|  | hpc_ptr->ctlr_id = ctlr_id; | 
|  | hpc_ptr->ctlr_relative_id = ctlr; | 
|  | hpc_ptr->slot_count = slot_num; | 
|  | hpc_ptr->bus_count = bus_num; | 
|  | debug ("now enter ctlr data struture ---\n"); | 
|  | debug ("ctlr id: %x\n", ctlr_id); | 
|  | debug ("ctlr_relative_id: %x\n", hpc_ptr->ctlr_relative_id); | 
|  | debug ("count of slots controlled by this ctlr: %x\n", slot_num); | 
|  | debug ("count of buses controlled by this ctlr: %x\n", bus_num); | 
|  |  | 
|  | /* init slot structure, fetch slot, bus, cap... */ | 
|  | slot_ptr = hpc_ptr->slots; | 
|  | for (slot = 0; slot < slot_num; slot++) { | 
|  | slot_ptr->slot_num = readb (io_mem + addr_slot); | 
|  | slot_ptr->slot_bus_num = readb (io_mem + addr_slot + slot_num); | 
|  | slot_ptr->ctl_index = readb (io_mem + addr_slot + 2*slot_num); | 
|  | slot_ptr->slot_cap = readb (io_mem + addr_slot + 3*slot_num); | 
|  |  | 
|  | // create bus_info lined list --- if only one slot per bus: slot_min = slot_max | 
|  |  | 
|  | bus_info_ptr2 = ibmphp_find_same_bus_num (slot_ptr->slot_bus_num); | 
|  | if (!bus_info_ptr2) { | 
|  | bus_info_ptr1 = kzalloc(sizeof(struct bus_info), GFP_KERNEL); | 
|  | if (!bus_info_ptr1) { | 
|  | rc = -ENOMEM; | 
|  | goto error_no_hp_slot; | 
|  | } | 
|  | bus_info_ptr1->slot_min = slot_ptr->slot_num; | 
|  | bus_info_ptr1->slot_max = slot_ptr->slot_num; | 
|  | bus_info_ptr1->slot_count += 1; | 
|  | bus_info_ptr1->busno = slot_ptr->slot_bus_num; | 
|  | bus_info_ptr1->index = bus_index++; | 
|  | bus_info_ptr1->current_speed = 0xff; | 
|  | bus_info_ptr1->current_bus_mode = 0xff; | 
|  |  | 
|  | bus_info_ptr1->controller_id = hpc_ptr->ctlr_id; | 
|  |  | 
|  | list_add_tail (&bus_info_ptr1->bus_info_list, &bus_info_head); | 
|  |  | 
|  | } else { | 
|  | bus_info_ptr2->slot_min = min (bus_info_ptr2->slot_min, slot_ptr->slot_num); | 
|  | bus_info_ptr2->slot_max = max (bus_info_ptr2->slot_max, slot_ptr->slot_num); | 
|  | bus_info_ptr2->slot_count += 1; | 
|  |  | 
|  | } | 
|  |  | 
|  | // end of creating the bus_info linked list | 
|  |  | 
|  | slot_ptr++; | 
|  | addr_slot += 1; | 
|  | } | 
|  |  | 
|  | /* init bus structure */ | 
|  | bus_ptr = hpc_ptr->buses; | 
|  | for (bus = 0; bus < bus_num; bus++) { | 
|  | bus_ptr->bus_num = readb (io_mem + addr_bus + bus); | 
|  | bus_ptr->slots_at_33_conv = readb (io_mem + addr_bus + bus_num + 8 * bus); | 
|  | bus_ptr->slots_at_66_conv = readb (io_mem + addr_bus + bus_num + 8 * bus + 1); | 
|  |  | 
|  | bus_ptr->slots_at_66_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 2); | 
|  |  | 
|  | bus_ptr->slots_at_100_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 3); | 
|  |  | 
|  | bus_ptr->slots_at_133_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 4); | 
|  |  | 
|  | bus_info_ptr2 = ibmphp_find_same_bus_num (bus_ptr->bus_num); | 
|  | if (bus_info_ptr2) { | 
|  | bus_info_ptr2->slots_at_33_conv = bus_ptr->slots_at_33_conv; | 
|  | bus_info_ptr2->slots_at_66_conv = bus_ptr->slots_at_66_conv; | 
|  | bus_info_ptr2->slots_at_66_pcix = bus_ptr->slots_at_66_pcix; | 
|  | bus_info_ptr2->slots_at_100_pcix = bus_ptr->slots_at_100_pcix; | 
|  | bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix; | 
|  | } | 
|  | bus_ptr++; | 
|  | } | 
|  |  | 
|  | hpc_ptr->ctlr_type = temp; | 
|  |  | 
|  | switch (hpc_ptr->ctlr_type) { | 
|  | case 1: | 
|  | hpc_ptr->u.pci_ctlr.bus = readb (io_mem + addr); | 
|  | hpc_ptr->u.pci_ctlr.dev_fun = readb (io_mem + addr + 1); | 
|  | hpc_ptr->irq = readb (io_mem + addr + 2); | 
|  | addr += 3; | 
|  | debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n", | 
|  | hpc_ptr->u.pci_ctlr.bus, | 
|  | hpc_ptr->u.pci_ctlr.dev_fun, hpc_ptr->irq); | 
|  | break; | 
|  |  | 
|  | case 0: | 
|  | hpc_ptr->u.isa_ctlr.io_start = readw (io_mem + addr); | 
|  | hpc_ptr->u.isa_ctlr.io_end = readw (io_mem + addr + 2); | 
|  | if (!request_region (hpc_ptr->u.isa_ctlr.io_start, | 
|  | (hpc_ptr->u.isa_ctlr.io_end - hpc_ptr->u.isa_ctlr.io_start + 1), | 
|  | "ibmphp")) { | 
|  | rc = -ENODEV; | 
|  | goto error_no_hp_slot; | 
|  | } | 
|  | hpc_ptr->irq = readb (io_mem + addr + 4); | 
|  | addr += 5; | 
|  | break; | 
|  |  | 
|  | case 2: | 
|  | case 4: | 
|  | hpc_ptr->u.wpeg_ctlr.wpegbbar = readl (io_mem + addr); | 
|  | hpc_ptr->u.wpeg_ctlr.i2c_addr = readb (io_mem + addr + 4); | 
|  | hpc_ptr->irq = readb (io_mem + addr + 5); | 
|  | addr += 6; | 
|  | break; | 
|  | default: | 
|  | rc = -ENODEV; | 
|  | goto error_no_hp_slot; | 
|  | } | 
|  |  | 
|  | //reorganize chassis' linked list | 
|  | combine_wpg_for_chassis (); | 
|  | combine_wpg_for_expansion (); | 
|  | hpc_ptr->revision = 0xff; | 
|  | hpc_ptr->options = 0xff; | 
|  | hpc_ptr->starting_slot_num = hpc_ptr->slots[0].slot_num; | 
|  | hpc_ptr->ending_slot_num = hpc_ptr->slots[slot_num-1].slot_num; | 
|  |  | 
|  | // register slots with hpc core as well as create linked list of ibm slot | 
|  | for (index = 0; index < hpc_ptr->slot_count; index++) { | 
|  |  | 
|  | hp_slot_ptr = kzalloc(sizeof(*hp_slot_ptr), GFP_KERNEL); | 
|  | if (!hp_slot_ptr) { | 
|  | rc = -ENOMEM; | 
|  | goto error_no_hp_slot; | 
|  | } | 
|  |  | 
|  | hp_slot_ptr->info = kzalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL); | 
|  | if (!hp_slot_ptr->info) { | 
|  | rc = -ENOMEM; | 
|  | goto error_no_hp_info; | 
|  | } | 
|  |  | 
|  | hp_slot_ptr->name = kmalloc(30, GFP_KERNEL); | 
|  | if (!hp_slot_ptr->name) { | 
|  | rc = -ENOMEM; | 
|  | goto error_no_hp_name; | 
|  | } | 
|  |  | 
|  | tmp_slot = kzalloc(sizeof(*tmp_slot), GFP_KERNEL); | 
|  | if (!tmp_slot) { | 
|  | rc = -ENOMEM; | 
|  | goto error_no_slot; | 
|  | } | 
|  |  | 
|  | tmp_slot->flag = 1; | 
|  |  | 
|  | tmp_slot->capabilities = hpc_ptr->slots[index].slot_cap; | 
|  | if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_133_MAX) == EBDA_SLOT_133_MAX) | 
|  | tmp_slot->supported_speed =  3; | 
|  | else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_100_MAX) == EBDA_SLOT_100_MAX) | 
|  | tmp_slot->supported_speed =  2; | 
|  | else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX) | 
|  | tmp_slot->supported_speed =  1; | 
|  |  | 
|  | if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP) | 
|  | tmp_slot->supported_bus_mode = 1; | 
|  | else | 
|  | tmp_slot->supported_bus_mode = 0; | 
|  |  | 
|  |  | 
|  | tmp_slot->bus = hpc_ptr->slots[index].slot_bus_num; | 
|  |  | 
|  | bus_info_ptr1 = ibmphp_find_same_bus_num (hpc_ptr->slots[index].slot_bus_num); | 
|  | if (!bus_info_ptr1) { | 
|  | rc = -ENODEV; | 
|  | goto error; | 
|  | } | 
|  | tmp_slot->bus_on = bus_info_ptr1; | 
|  | bus_info_ptr1 = NULL; | 
|  | tmp_slot->ctrl = hpc_ptr; | 
|  |  | 
|  | tmp_slot->ctlr_index = hpc_ptr->slots[index].ctl_index; | 
|  | tmp_slot->number = hpc_ptr->slots[index].slot_num; | 
|  | tmp_slot->hotplug_slot = hp_slot_ptr; | 
|  |  | 
|  | hp_slot_ptr->private = tmp_slot; | 
|  | hp_slot_ptr->release = release_slot; | 
|  |  | 
|  | rc = fillslotinfo(hp_slot_ptr); | 
|  | if (rc) | 
|  | goto error; | 
|  |  | 
|  | rc = ibmphp_init_devno ((struct slot **) &hp_slot_ptr->private); | 
|  | if (rc) | 
|  | goto error; | 
|  | hp_slot_ptr->ops = &ibmphp_hotplug_slot_ops; | 
|  |  | 
|  | // end of registering ibm slot with hotplug core | 
|  |  | 
|  | list_add (& ((struct slot *)(hp_slot_ptr->private))->ibm_slot_list, &ibmphp_slot_head); | 
|  | } | 
|  |  | 
|  | print_bus_info (); | 
|  | list_add (&hpc_ptr->ebda_hpc_list, &ebda_hpc_head ); | 
|  |  | 
|  | }			/* each hpc  */ | 
|  |  | 
|  | list_for_each (list, &ibmphp_slot_head) { | 
|  | tmp_slot = list_entry (list, struct slot, ibm_slot_list); | 
|  |  | 
|  | snprintf (tmp_slot->hotplug_slot->name, 30, "%s", create_file_name (tmp_slot)); | 
|  | pci_hp_register (tmp_slot->hotplug_slot); | 
|  | } | 
|  |  | 
|  | print_ebda_hpc (); | 
|  | print_ibm_slot (); | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | kfree (hp_slot_ptr->private); | 
|  | error_no_slot: | 
|  | kfree (hp_slot_ptr->name); | 
|  | error_no_hp_name: | 
|  | kfree (hp_slot_ptr->info); | 
|  | error_no_hp_info: | 
|  | kfree (hp_slot_ptr); | 
|  | error_no_hp_slot: | 
|  | free_ebda_hpc (hpc_ptr); | 
|  | error_no_hpc: | 
|  | iounmap (io_mem); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * map info (bus, devfun, start addr, end addr..) of i/o, memory, | 
|  | * pfm from the physical addr to a list of resource. | 
|  | */ | 
|  | static int __init ebda_rsrc_rsrc (void) | 
|  | { | 
|  | u16 addr; | 
|  | short rsrc; | 
|  | u8 type, rsrc_type; | 
|  | struct ebda_pci_rsrc *rsrc_ptr; | 
|  |  | 
|  | addr = rsrc_list_ptr->phys_addr; | 
|  | debug ("now entering rsrc land\n"); | 
|  | debug ("offset of rsrc: %x\n", rsrc_list_ptr->phys_addr); | 
|  |  | 
|  | for (rsrc = 0; rsrc < rsrc_list_ptr->num_entries; rsrc++) { | 
|  | type = readb (io_mem + addr); | 
|  |  | 
|  | addr += 1; | 
|  | rsrc_type = type & EBDA_RSRC_TYPE_MASK; | 
|  |  | 
|  | if (rsrc_type == EBDA_IO_RSRC_TYPE) { | 
|  | rsrc_ptr = alloc_ebda_pci_rsrc (); | 
|  | if (!rsrc_ptr) { | 
|  | iounmap (io_mem); | 
|  | return -ENOMEM; | 
|  | } | 
|  | rsrc_ptr->rsrc_type = type; | 
|  |  | 
|  | rsrc_ptr->bus_num = readb (io_mem + addr); | 
|  | rsrc_ptr->dev_fun = readb (io_mem + addr + 1); | 
|  | rsrc_ptr->start_addr = readw (io_mem + addr + 2); | 
|  | rsrc_ptr->end_addr = readw (io_mem + addr + 4); | 
|  | addr += 6; | 
|  |  | 
|  | debug ("rsrc from io type ----\n"); | 
|  | debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n", | 
|  | rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr); | 
|  |  | 
|  | list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head); | 
|  | } | 
|  |  | 
|  | if (rsrc_type == EBDA_MEM_RSRC_TYPE || rsrc_type == EBDA_PFM_RSRC_TYPE) { | 
|  | rsrc_ptr = alloc_ebda_pci_rsrc (); | 
|  | if (!rsrc_ptr ) { | 
|  | iounmap (io_mem); | 
|  | return -ENOMEM; | 
|  | } | 
|  | rsrc_ptr->rsrc_type = type; | 
|  |  | 
|  | rsrc_ptr->bus_num = readb (io_mem + addr); | 
|  | rsrc_ptr->dev_fun = readb (io_mem + addr + 1); | 
|  | rsrc_ptr->start_addr = readl (io_mem + addr + 2); | 
|  | rsrc_ptr->end_addr = readl (io_mem + addr + 6); | 
|  | addr += 10; | 
|  |  | 
|  | debug ("rsrc from mem or pfm ---\n"); | 
|  | debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n", | 
|  | rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr); | 
|  |  | 
|  | list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head); | 
|  | } | 
|  | } | 
|  | kfree (rsrc_list_ptr); | 
|  | rsrc_list_ptr = NULL; | 
|  | print_ebda_pci_rsrc (); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | u16 ibmphp_get_total_controllers (void) | 
|  | { | 
|  | return hpc_list_ptr->num_ctlrs; | 
|  | } | 
|  |  | 
|  | struct slot *ibmphp_get_slot_from_physical_num (u8 physical_num) | 
|  | { | 
|  | struct slot *slot; | 
|  | struct list_head *list; | 
|  |  | 
|  | list_for_each (list, &ibmphp_slot_head) { | 
|  | slot = list_entry (list, struct slot, ibm_slot_list); | 
|  | if (slot->number == physical_num) | 
|  | return slot; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* To find: | 
|  | *	- the smallest slot number | 
|  | *	- the largest slot number | 
|  | *	- the total number of the slots based on each bus | 
|  | *	  (if only one slot per bus slot_min = slot_max ) | 
|  | */ | 
|  | struct bus_info *ibmphp_find_same_bus_num (u32 num) | 
|  | { | 
|  | struct bus_info *ptr; | 
|  | struct list_head  *ptr1; | 
|  |  | 
|  | list_for_each (ptr1, &bus_info_head) { | 
|  | ptr = list_entry (ptr1, struct bus_info, bus_info_list); | 
|  | if (ptr->busno == num) | 
|  | return ptr; | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /*  Finding relative bus number, in order to map corresponding | 
|  | *  bus register | 
|  | */ | 
|  | int ibmphp_get_bus_index (u8 num) | 
|  | { | 
|  | struct bus_info *ptr; | 
|  | struct list_head  *ptr1; | 
|  |  | 
|  | list_for_each (ptr1, &bus_info_head) { | 
|  | ptr = list_entry (ptr1, struct bus_info, bus_info_list); | 
|  | if (ptr->busno == num) | 
|  | return ptr->index; | 
|  | } | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | void ibmphp_free_bus_info_queue (void) | 
|  | { | 
|  | struct bus_info *bus_info; | 
|  | struct list_head *list; | 
|  | struct list_head *next; | 
|  |  | 
|  | list_for_each_safe (list, next, &bus_info_head ) { | 
|  | bus_info = list_entry (list, struct bus_info, bus_info_list); | 
|  | kfree (bus_info); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ibmphp_free_ebda_hpc_queue (void) | 
|  | { | 
|  | struct controller *controller = NULL; | 
|  | struct list_head *list; | 
|  | struct list_head *next; | 
|  | int pci_flag = 0; | 
|  |  | 
|  | list_for_each_safe (list, next, &ebda_hpc_head) { | 
|  | controller = list_entry (list, struct controller, ebda_hpc_list); | 
|  | if (controller->ctlr_type == 0) | 
|  | release_region (controller->u.isa_ctlr.io_start, (controller->u.isa_ctlr.io_end - controller->u.isa_ctlr.io_start + 1)); | 
|  | else if ((controller->ctlr_type == 1) && (!pci_flag)) { | 
|  | ++pci_flag; | 
|  | pci_unregister_driver (&ibmphp_driver); | 
|  | } | 
|  | free_ebda_hpc (controller); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ibmphp_free_ebda_pci_rsrc_queue (void) | 
|  | { | 
|  | struct ebda_pci_rsrc *resource; | 
|  | struct list_head *list; | 
|  | struct list_head *next; | 
|  |  | 
|  | list_for_each_safe (list, next, &ibmphp_ebda_pci_rsrc_head) { | 
|  | resource = list_entry (list, struct ebda_pci_rsrc, ebda_pci_rsrc_list); | 
|  | kfree (resource); | 
|  | resource = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct pci_device_id id_table[] = { | 
|  | { | 
|  | .vendor		= PCI_VENDOR_ID_IBM, | 
|  | .device		= HPC_DEVICE_ID, | 
|  | .subvendor	= PCI_VENDOR_ID_IBM, | 
|  | .subdevice	= HPC_SUBSYSTEM_ID, | 
|  | .class		= ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00), | 
|  | }, {} | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, id_table); | 
|  |  | 
|  | static int ibmphp_probe (struct pci_dev *, const struct pci_device_id *); | 
|  | static struct pci_driver ibmphp_driver = { | 
|  | .name		= "ibmphp", | 
|  | .id_table	= id_table, | 
|  | .probe		= ibmphp_probe, | 
|  | }; | 
|  |  | 
|  | int ibmphp_register_pci (void) | 
|  | { | 
|  | struct controller *ctrl; | 
|  | struct list_head *tmp; | 
|  | int rc = 0; | 
|  |  | 
|  | list_for_each (tmp, &ebda_hpc_head) { | 
|  | ctrl = list_entry (tmp, struct controller, ebda_hpc_list); | 
|  | if (ctrl->ctlr_type == 1) { | 
|  | rc = pci_register_driver(&ibmphp_driver); | 
|  | break; | 
|  | } | 
|  | } | 
|  | return rc; | 
|  | } | 
|  | static int ibmphp_probe (struct pci_dev * dev, const struct pci_device_id *ids) | 
|  | { | 
|  | struct controller *ctrl; | 
|  | struct list_head *tmp; | 
|  |  | 
|  | debug ("inside ibmphp_probe\n"); | 
|  |  | 
|  | list_for_each (tmp, &ebda_hpc_head) { | 
|  | ctrl = list_entry (tmp, struct controller, ebda_hpc_list); | 
|  | if (ctrl->ctlr_type == 1) { | 
|  | if ((dev->devfn == ctrl->u.pci_ctlr.dev_fun) && (dev->bus->number == ctrl->u.pci_ctlr.bus)) { | 
|  | ctrl->ctrl_dev = dev; | 
|  | debug ("found device!!!\n"); | 
|  | debug ("dev->device = %x, dev->subsystem_device = %x\n", dev->device, dev->subsystem_device); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  | } | 
|  | return -ENODEV; | 
|  | } | 
|  |  |