OMAP3: Move common regulator configuration to twl-common
Some regulator config can be moved out from board files,
since they are close to identical.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index aa6a173..f7bc171 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -186,9 +186,6 @@
.default_device = &devkit8000_lcd_device,
};
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
-
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_1),
KEY(1, 0, KEY_2),
@@ -288,20 +285,6 @@
.consumer_supplies = &devkit8000_vmmc1_supply,
};
-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
-static struct regulator_init_data devkit8000_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &devkit8000_vdda_dac_supply,
-};
-
/* VPLL1 for digital video outputs */
static struct regulator_init_data devkit8000_vpll1 = {
.constraints = {
@@ -335,7 +318,6 @@
/* platform_data for children goes here */
.gpio = &devkit8000_gpio_data,
.vmmc1 = &devkit8000_vmmc1,
- .vdac = &devkit8000_vdac,
.vpll1 = &devkit8000_vpll1,
.vio = &devkit8000_vio,
.keypad = &devkit8000_kp_data,
@@ -344,7 +326,8 @@
static int __init devkit8000_i2c_init(void)
{
omap3_pmic_get_config(&devkit8000_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, 0);
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC);
omap3_pmic_init("tps65930", &devkit8000_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */