| /* | 
 |  * arch/arm/mach-ixp23xx/roadrunner.c | 
 |  * | 
 |  * RoadRunner board-specific routines | 
 |  * | 
 |  * Author: Deepak Saxena <dsaxena@plexity.net> | 
 |  * | 
 |  * Copyright 2005 (c) MontaVista Software, Inc. | 
 |  * | 
 |  * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation | 
 |  * | 
 |  * This file is licensed under the terms of the GNU General Public | 
 |  * License version 2. This program is licensed "as is" without any | 
 |  * warranty of any kind, whether express or implied. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/serial.h> | 
 | #include <linux/tty.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/serial.h> | 
 | #include <linux/serial_8250.h> | 
 | #include <linux/serial_core.h> | 
 | #include <linux/device.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/mtd/physmap.h> | 
 |  | 
 | #include <asm/types.h> | 
 | #include <asm/setup.h> | 
 | #include <asm/memory.h> | 
 | #include <asm/hardware.h> | 
 | #include <asm/mach-types.h> | 
 | #include <asm/irq.h> | 
 | #include <asm/system.h> | 
 | #include <asm/tlbflush.h> | 
 | #include <asm/pgtable.h> | 
 |  | 
 | #include <asm/mach/map.h> | 
 | #include <asm/mach/irq.h> | 
 | #include <asm/mach/arch.h> | 
 | #include <asm/mach/irq.h> | 
 | #include <asm/mach/pci.h> | 
 |  | 
 | /* | 
 |  * Interrupt mapping | 
 |  */ | 
 | #define INTA		IRQ_ROADRUNNER_PCI_INTA | 
 | #define INTB		IRQ_ROADRUNNER_PCI_INTB | 
 | #define INTC		IRQ_ROADRUNNER_PCI_INTC | 
 | #define INTD		IRQ_ROADRUNNER_PCI_INTD | 
 |  | 
 | #define INTC_PIN	IXP23XX_GPIO_PIN_11 | 
 | #define INTD_PIN	IXP23XX_GPIO_PIN_12 | 
 |  | 
 | static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) | 
 | { | 
 | 	static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA}; | 
 | 	static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD}; | 
 | 	static int usb_irq[] = {INTB, INTC, INTD, -1}; | 
 | 	static int mini_pci_1_irq[] = {INTB, INTC, -1, -1}; | 
 | 	static int mini_pci_2_irq[] = {INTC, INTD, -1, -1}; | 
 |  | 
 | 	switch(dev->bus->number) { | 
 | 		case 0: | 
 | 			switch(dev->devfn) { | 
 | 			case 0x0: // PCI-PCI bridge | 
 | 				break; | 
 | 			case 0x8: // PCI Card Slot | 
 | 				return pci_card_slot_irq[pin - 1]; | 
 | 			case 0x10: // PMC Slot | 
 | 				return pmc_card_slot_irq[pin - 1]; | 
 | 			case 0x18: // PMC Slot Secondary Agent | 
 | 				break; | 
 | 			case 0x20: // IXP Processor | 
 | 				break; | 
 | 			default: | 
 | 				return NO_IRQ; | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		case 1: | 
 | 			switch(dev->devfn) { | 
 | 			case 0x0: // IDE Controller | 
 | 				return (pin == 1) ? INTC : -1; | 
 | 			case 0x8: // USB fun 0 | 
 | 			case 0x9: // USB fun 1 | 
 | 			case 0xa: // USB fun 2 | 
 | 				return usb_irq[pin - 1]; | 
 | 			case 0x10: // Mini PCI 1 | 
 | 				return mini_pci_1_irq[pin-1]; | 
 | 			case 0x18: // Mini PCI 2 | 
 | 				return mini_pci_2_irq[pin-1]; | 
 | 			case 0x20: // MEM slot | 
 | 				return (pin == 1) ? INTA : -1; | 
 | 			default: | 
 | 				return NO_IRQ; | 
 | 			} | 
 | 			break; | 
 |  | 
 | 		default: | 
 | 			return NO_IRQ; | 
 | 	} | 
 |  | 
 | 	return NO_IRQ; | 
 | } | 
 |  | 
 | static void roadrunner_pci_preinit(void) | 
 | { | 
 | 	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW); | 
 | 	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW); | 
 |  | 
 | 	ixp23xx_pci_preinit(); | 
 | } | 
 |  | 
 | static struct hw_pci roadrunner_pci __initdata = { | 
 | 	.nr_controllers	= 1, | 
 | 	.preinit	= roadrunner_pci_preinit, | 
 | 	.setup		= ixp23xx_pci_setup, | 
 | 	.scan		= ixp23xx_pci_scan_bus, | 
 | 	.map_irq	= roadrunner_map_irq, | 
 | }; | 
 |  | 
 | static int __init roadrunner_pci_init(void) | 
 | { | 
 | 	if (machine_is_roadrunner()) | 
 | 		pci_common_init(&roadrunner_pci); | 
 |  | 
 | 	return 0; | 
 | }; | 
 |  | 
 | subsys_initcall(roadrunner_pci_init); | 
 |  | 
 | static struct physmap_flash_data roadrunner_flash_data = { | 
 | 	.width		= 2, | 
 | }; | 
 |  | 
 | static struct resource roadrunner_flash_resource = { | 
 | 	.start		= 0x90000000, | 
 | 	.end		= 0x93ffffff, | 
 | 	.flags		= IORESOURCE_MEM, | 
 | }; | 
 |  | 
 | static struct platform_device roadrunner_flash = { | 
 | 	.name		= "physmap-flash", | 
 | 	.id		= 0, | 
 | 	.dev		= { | 
 | 		.platform_data	= &roadrunner_flash_data, | 
 | 	}, | 
 | 	.num_resources	= 1, | 
 | 	.resource	= &roadrunner_flash_resource, | 
 | }; | 
 |  | 
 | static void __init roadrunner_init(void) | 
 | { | 
 | 	platform_device_register(&roadrunner_flash); | 
 |  | 
 | 	/* | 
 | 	 * Mark flash as writeable | 
 | 	 */ | 
 | 	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; | 
 | 	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; | 
 | 	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; | 
 | 	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; | 
 |  | 
 | 	ixp23xx_sys_init(); | 
 | } | 
 |  | 
 | MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") | 
 | 	/* Maintainer: Deepak Saxena */ | 
 | 	.phys_io	= IXP23XX_PERIPHERAL_PHYS, | 
 | 	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, | 
 | 	.map_io		= ixp23xx_map_io, | 
 | 	.init_irq	= ixp23xx_init_irq, | 
 | 	.timer		= &ixp23xx_timer, | 
 | 	.boot_params	= 0x00000100, | 
 | 	.init_machine	= roadrunner_init, | 
 | MACHINE_END |