|  | /* $Id: ebus.c,v 1.20 2002/01/05 01:13:43 davem Exp $ | 
|  | * ebus.c: PCI to EBus bridge device. | 
|  | * | 
|  | * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be) | 
|  | * | 
|  | * Adopted for sparc by V. Roganov and G. Raiko. | 
|  | * Fixes for different platforms by Pete Zaitcev. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  |  | 
|  | #include <asm/system.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/pbm.h> | 
|  | #include <asm/ebus.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/oplib.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/bpp.h> | 
|  |  | 
|  | struct linux_ebus *ebus_chain = NULL; | 
|  |  | 
|  | /* We are together with pcic.c under CONFIG_PCI. */ | 
|  | extern unsigned int pcic_pin_to_irq(unsigned int, char *name); | 
|  |  | 
|  | /* | 
|  | * IRQ Blacklist | 
|  | * Here we list PROMs and systems that are known to supply crap as IRQ numbers. | 
|  | */ | 
|  | struct ebus_device_irq { | 
|  | char *name; | 
|  | unsigned int pin; | 
|  | }; | 
|  |  | 
|  | struct ebus_system_entry { | 
|  | char *esname; | 
|  | struct ebus_device_irq *ipt; | 
|  | }; | 
|  |  | 
|  | static struct ebus_device_irq je1_1[] = { | 
|  | { "8042",		 3 }, | 
|  | { "SUNW,CS4231",	 0 }, | 
|  | { "parallel",		 0 }, | 
|  | { "se",			 2 }, | 
|  | { NULL, 0 } | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Gleb's JE1 supplied reasonable pin numbers, but mine did not (OBP 2.32). | 
|  | * Blacklist the sucker... Note that Gleb's system will work. | 
|  | */ | 
|  | static struct ebus_system_entry ebus_blacklist[] = { | 
|  | { "SUNW,JavaEngine1", je1_1 }, | 
|  | { NULL, NULL } | 
|  | }; | 
|  |  | 
|  | static struct ebus_device_irq *ebus_blackp = NULL; | 
|  |  | 
|  | /* | 
|  | */ | 
|  | static inline unsigned long ebus_alloc(size_t size) | 
|  | { | 
|  | return (unsigned long)kmalloc(size, GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | /* | 
|  | */ | 
|  | int __init ebus_blacklist_irq(char *name) | 
|  | { | 
|  | struct ebus_device_irq *dp; | 
|  |  | 
|  | if ((dp = ebus_blackp) != NULL) { | 
|  | for (; dp->name != NULL; dp++) { | 
|  | if (strcmp(name, dp->name) == 0) { | 
|  | return pcic_pin_to_irq(dp->pin, name); | 
|  | } | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void __init fill_ebus_child(struct device_node *dp, | 
|  | struct linux_ebus_child *dev) | 
|  | { | 
|  | int *regs; | 
|  | int *irqs; | 
|  | int i, len; | 
|  |  | 
|  | dev->prom_node = dp; | 
|  | regs = of_get_property(dp, "reg", &len); | 
|  | if (!regs) | 
|  | len = 0; | 
|  | dev->num_addrs = len / sizeof(regs[0]); | 
|  |  | 
|  | for (i = 0; i < dev->num_addrs; i++) { | 
|  | if (regs[i] >= dev->parent->num_addrs) { | 
|  | prom_printf("UGH: property for %s was %d, need < %d\n", | 
|  | dev->prom_node->name, len, | 
|  | dev->parent->num_addrs); | 
|  | panic(__FUNCTION__); | 
|  | } | 
|  |  | 
|  | /* XXX resource */ | 
|  | dev->resource[i].start = | 
|  | dev->parent->resource[regs[i]].start; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < PROMINTR_MAX; i++) | 
|  | dev->irqs[i] = PCI_IRQ_NONE; | 
|  |  | 
|  | if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) { | 
|  | dev->num_irqs = 1; | 
|  | } else { | 
|  | irqs = of_get_property(dp, "interrupts", &len); | 
|  | if (!irqs) { | 
|  | dev->num_irqs = 0; | 
|  | dev->irqs[0] = 0; | 
|  | if (dev->parent->num_irqs != 0) { | 
|  | dev->num_irqs = 1; | 
|  | dev->irqs[0] = dev->parent->irqs[0]; | 
|  | } | 
|  | } else { | 
|  | dev->num_irqs = len / sizeof(irqs[0]); | 
|  | if (irqs[0] == 0 || irqs[0] >= 8) { | 
|  | /* | 
|  | * XXX Zero is a valid pin number... | 
|  | * This works as long as Ebus is not wired | 
|  | * to INTA#. | 
|  | */ | 
|  | printk("EBUS: %s got bad irq %d from PROM\n", | 
|  | dev->prom_node->name, irqs[0]); | 
|  | dev->num_irqs = 0; | 
|  | dev->irqs[0] = 0; | 
|  | } else { | 
|  | dev->irqs[0] = | 
|  | pcic_pin_to_irq(irqs[0], | 
|  | dev->prom_node->name); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *dev) | 
|  | { | 
|  | struct linux_prom_registers *regs; | 
|  | struct linux_ebus_child *child; | 
|  | int *irqs; | 
|  | int i, n, len; | 
|  | unsigned long baseaddr; | 
|  |  | 
|  | dev->prom_node = dp; | 
|  |  | 
|  | regs = of_get_property(dp, "reg", &len); | 
|  | if (len % sizeof(struct linux_prom_registers)) { | 
|  | prom_printf("UGH: proplen for %s was %d, need multiple of %d\n", | 
|  | dev->prom_node->name, len, | 
|  | (int)sizeof(struct linux_prom_registers)); | 
|  | panic(__FUNCTION__); | 
|  | } | 
|  | dev->num_addrs = len / sizeof(struct linux_prom_registers); | 
|  |  | 
|  | for (i = 0; i < dev->num_addrs; i++) { | 
|  | /* | 
|  | * XXX Collect JE-1 PROM | 
|  | * | 
|  | * Example - JS-E with 3.11: | 
|  | *  /ebus | 
|  | *      regs | 
|  | *        0x00000000, 0x0, 0x00000000, 0x0, 0x00000000, | 
|  | *        0x82000010, 0x0, 0xf0000000, 0x0, 0x01000000, | 
|  | *        0x82000014, 0x0, 0x38800000, 0x0, 0x00800000, | 
|  | *      ranges | 
|  | *        0x00, 0x00000000, 0x02000010, 0x0, 0x0, 0x01000000, | 
|  | *        0x01, 0x01000000, 0x02000014, 0x0, 0x0, 0x00800000, | 
|  | *  /ebus/8042 | 
|  | *      regs | 
|  | *        0x00000001, 0x00300060, 0x00000008, | 
|  | *        0x00000001, 0x00300060, 0x00000008, | 
|  | */ | 
|  | n = regs[i].which_io; | 
|  | if (n >= 4) { | 
|  | /* XXX This is copied from old JE-1 by Gleb. */ | 
|  | n = (regs[i].which_io - 0x10) >> 2; | 
|  | } else { | 
|  | ; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * XXX Now as we have regions, why don't we make an on-demand allocation... | 
|  | */ | 
|  | dev->resource[i].start = 0; | 
|  | if ((baseaddr = dev->bus->self->resource[n].start + | 
|  | regs[i].phys_addr) != 0) { | 
|  | /* dev->resource[i].name = dev->prom_name; */ | 
|  | if ((baseaddr = (unsigned long) ioremap(baseaddr, | 
|  | regs[i].reg_size)) == 0) { | 
|  | panic("ebus: unable to remap dev %s", | 
|  | dev->prom_node->name); | 
|  | } | 
|  | } | 
|  | dev->resource[i].start = baseaddr;	/* XXX Unaligned */ | 
|  | } | 
|  |  | 
|  | for (i = 0; i < PROMINTR_MAX; i++) | 
|  | dev->irqs[i] = PCI_IRQ_NONE; | 
|  |  | 
|  | if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) { | 
|  | dev->num_irqs = 1; | 
|  | } else { | 
|  | irqs = of_get_property(dp, "interrupts", &len); | 
|  | if (!irqs) { | 
|  | dev->num_irqs = 0; | 
|  | if ((dev->irqs[0] = dev->bus->self->irq) != 0) { | 
|  | dev->num_irqs = 1; | 
|  | /* P3 */ /* printk("EBUS: child %s irq %d from parent\n", dev->prom_name, dev->irqs[0]); */ | 
|  | } | 
|  | } else { | 
|  | dev->num_irqs = 1;  /* dev->num_irqs = len / sizeof(irqs[0]); */ | 
|  | if (irqs[0] == 0 || irqs[0] >= 8) { | 
|  | /* See above for the parent. XXX */ | 
|  | printk("EBUS: %s got bad irq %d from PROM\n", | 
|  | dev->prom_node->name, irqs[0]); | 
|  | dev->num_irqs = 0; | 
|  | dev->irqs[0] = 0; | 
|  | } else { | 
|  | dev->irqs[0] = | 
|  | pcic_pin_to_irq(irqs[0], | 
|  | dev->prom_node->name); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | dev->ofdev.node = dp; | 
|  | dev->ofdev.dev.parent = &dev->bus->ofdev.dev; | 
|  | dev->ofdev.dev.bus = &ebus_bus_type; | 
|  | strcpy(dev->ofdev.dev.bus_id, dp->path_component_name); | 
|  |  | 
|  | /* Register with core */ | 
|  | if (of_device_register(&dev->ofdev) != 0) | 
|  | printk(KERN_DEBUG "ebus: device registration error for %s!\n", | 
|  | dev->ofdev.dev.bus_id); | 
|  |  | 
|  | if ((dp = dp->child) != NULL) { | 
|  | dev->children = (struct linux_ebus_child *) | 
|  | ebus_alloc(sizeof(struct linux_ebus_child)); | 
|  |  | 
|  | child = dev->children; | 
|  | child->next = NULL; | 
|  | child->parent = dev; | 
|  | child->bus = dev->bus; | 
|  | fill_ebus_child(dp, child); | 
|  |  | 
|  | while ((dp = dp->sibling) != NULL) { | 
|  | child->next = (struct linux_ebus_child *) | 
|  | ebus_alloc(sizeof(struct linux_ebus_child)); | 
|  |  | 
|  | child = child->next; | 
|  | child->next = NULL; | 
|  | child->parent = dev; | 
|  | child->bus = dev->bus; | 
|  | fill_ebus_child(dp, child); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void __init ebus_init(void) | 
|  | { | 
|  | struct linux_prom_pci_registers *regs; | 
|  | struct linux_pbm_info *pbm; | 
|  | struct linux_ebus_device *dev; | 
|  | struct linux_ebus *ebus; | 
|  | struct ebus_system_entry *sp; | 
|  | struct pci_dev *pdev; | 
|  | struct pcidev_cookie *cookie; | 
|  | struct device_node *dp; | 
|  | unsigned long addr, *base; | 
|  | unsigned short pci_command; | 
|  | int len, reg, nreg; | 
|  | int num_ebus = 0; | 
|  |  | 
|  | dp = of_find_node_by_path("/"); | 
|  | for (sp = ebus_blacklist; sp->esname != NULL; sp++) { | 
|  | if (strcmp(dp->name, sp->esname) == 0) { | 
|  | ebus_blackp = sp->ipt; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_EBUS, NULL); | 
|  | if (!pdev) | 
|  | return; | 
|  |  | 
|  | cookie = pdev->sysdata; | 
|  | dp = cookie->prom_node; | 
|  |  | 
|  | ebus_chain = ebus = (struct linux_ebus *) | 
|  | ebus_alloc(sizeof(struct linux_ebus)); | 
|  | ebus->next = NULL; | 
|  |  | 
|  | while (dp) { | 
|  | struct device_node *nd; | 
|  |  | 
|  | ebus->prom_node = dp; | 
|  | ebus->self = pdev; | 
|  | ebus->parent = pbm = cookie->pbm; | 
|  |  | 
|  | /* Enable BUS Master. */ | 
|  | pci_read_config_word(pdev, PCI_COMMAND, &pci_command); | 
|  | pci_command |= PCI_COMMAND_MASTER; | 
|  | pci_write_config_word(pdev, PCI_COMMAND, pci_command); | 
|  |  | 
|  | regs = of_get_property(dp, "reg", &len); | 
|  | if (!regs) { | 
|  | prom_printf("%s: can't find reg property\n", | 
|  | __FUNCTION__); | 
|  | prom_halt(); | 
|  | } | 
|  | nreg = len / sizeof(struct linux_prom_pci_registers); | 
|  |  | 
|  | base = &ebus->self->resource[0].start; | 
|  | for (reg = 0; reg < nreg; reg++) { | 
|  | if (!(regs[reg].which_io & 0x03000000)) | 
|  | continue; | 
|  |  | 
|  | addr = regs[reg].phys_lo; | 
|  | *base++ = addr; | 
|  | } | 
|  |  | 
|  | ebus->ofdev.node = dp; | 
|  | ebus->ofdev.dev.parent = &pdev->dev; | 
|  | ebus->ofdev.dev.bus = &ebus_bus_type; | 
|  | strcpy(ebus->ofdev.dev.bus_id, dp->path_component_name); | 
|  |  | 
|  | /* Register with core */ | 
|  | if (of_device_register(&ebus->ofdev) != 0) | 
|  | printk(KERN_DEBUG "ebus: device registration error for %s!\n", | 
|  | ebus->ofdev.dev.bus_id); | 
|  |  | 
|  |  | 
|  | nd = dp->child; | 
|  | if (!nd) | 
|  | goto next_ebus; | 
|  |  | 
|  | ebus->devices = (struct linux_ebus_device *) | 
|  | ebus_alloc(sizeof(struct linux_ebus_device)); | 
|  |  | 
|  | dev = ebus->devices; | 
|  | dev->next = NULL; | 
|  | dev->children = NULL; | 
|  | dev->bus = ebus; | 
|  | fill_ebus_device(nd, dev); | 
|  |  | 
|  | while ((nd = nd->sibling) != NULL) { | 
|  | dev->next = (struct linux_ebus_device *) | 
|  | ebus_alloc(sizeof(struct linux_ebus_device)); | 
|  |  | 
|  | dev = dev->next; | 
|  | dev->next = NULL; | 
|  | dev->children = NULL; | 
|  | dev->bus = ebus; | 
|  | fill_ebus_device(nd, dev); | 
|  | } | 
|  |  | 
|  | next_ebus: | 
|  | pdev = pci_get_device(PCI_VENDOR_ID_SUN, | 
|  | PCI_DEVICE_ID_SUN_EBUS, pdev); | 
|  | if (!pdev) | 
|  | break; | 
|  |  | 
|  | cookie = pdev->sysdata; | 
|  | dp = cookie->prom_node; | 
|  |  | 
|  | ebus->next = (struct linux_ebus *) | 
|  | ebus_alloc(sizeof(struct linux_ebus)); | 
|  | ebus = ebus->next; | 
|  | ebus->next = NULL; | 
|  | ++num_ebus; | 
|  | } | 
|  | if (pdev) | 
|  | pci_dev_put(pdev); | 
|  | } |