|  | /* | 
|  | * drivers/mtd/maps/tqm834x.c | 
|  | * | 
|  | * MTD mapping driver for TQM834x boards | 
|  | * | 
|  | * Copyright 2005 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>. | 
|  | * | 
|  | * This file is licensed under the terms of the GNU General Public License | 
|  | * version 2.  This program is licensed "as is" without any warranty of any | 
|  | * kind, whether express or implied. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/ppcboot.h> | 
|  |  | 
|  | #include <linux/mtd/mtd.h> | 
|  | #include <linux/mtd/map.h> | 
|  | #include <linux/mtd/partitions.h> | 
|  |  | 
|  | #define FLASH_BANK_MAX	2 | 
|  |  | 
|  | extern unsigned char __res[]; | 
|  |  | 
|  | /* trivial struct to describe partition information */ | 
|  | struct mtd_part_def | 
|  | { | 
|  | int nums; | 
|  | unsigned char *type; | 
|  | struct mtd_partition* mtd_part; | 
|  | }; | 
|  |  | 
|  | static struct mtd_info* mtd_banks[FLASH_BANK_MAX]; | 
|  | static struct map_info* map_banks[FLASH_BANK_MAX]; | 
|  | static struct mtd_part_def part_banks[FLASH_BANK_MAX]; | 
|  |  | 
|  | static unsigned long num_banks; | 
|  | static unsigned long start_scan_addr; | 
|  |  | 
|  | #ifdef CONFIG_MTD_PARTITIONS | 
|  | /* | 
|  | * The following defines the partition layout of TQM834x boards. | 
|  | * | 
|  | * See include/linux/mtd/partitions.h for definition of the | 
|  | * mtd_partition structure. | 
|  | * | 
|  | * Assume minimal initial size of 4 MiB per bank, will be updated | 
|  | * later in init_tqm834x_mtd() routine. | 
|  | */ | 
|  |  | 
|  | /* Partition definition for the first flash bank which is always present. */ | 
|  | static struct mtd_partition tqm834x_partitions_bank1[] = { | 
|  | { | 
|  | .name	= "u-boot",		/* u-boot firmware	*/ | 
|  | .offset	= 0x00000000, | 
|  | .size	= 0x00040000,		/* 256 KiB		*/ | 
|  | /*mask_flags: MTD_WRITEABLE,	 * force read-only	*/ | 
|  | }, | 
|  | { | 
|  | .name	= "env",		/* u-boot environment	*/ | 
|  | .offset	= 0x00040000, | 
|  | .size	= 0x00020000,		/* 128 KiB		*/ | 
|  | /*mask_flags: MTD_WRITEABLE,	 * force read-only	*/ | 
|  | }, | 
|  | { | 
|  | .name	= "kernel",		/* linux kernel image	*/ | 
|  | .offset	= 0x00060000, | 
|  | .size	= 0x00100000,		/* 1 MiB		*/ | 
|  | /*mask_flags: MTD_WRITEABLE,	 * force read-only	*/ | 
|  | }, | 
|  | { | 
|  | .name	= "initrd",		/* ramdisk image	*/ | 
|  | .offset	= 0x00160000, | 
|  | .size	= 0x00200000,		/* 2 MiB		*/ | 
|  | }, | 
|  | { | 
|  | .name	= "user",		/* user data		*/ | 
|  | .offset	= 0x00360000, | 
|  | .size	= 0x000a0000,		/* remaining space	*/ | 
|  | /* NOTE: this parttion size is re-calcated in		*/ | 
|  | /* init_tqm834x_mtd() to cover actual remaining space.	*/ | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* Partition definition for the second flash bank which may be present on some | 
|  | * TQM834x boards. | 
|  | */ | 
|  | static struct mtd_partition tqm834x_partitions_bank2[] = { | 
|  | { | 
|  | .name	= "jffs2",		/* jffs2 filesystem	*/ | 
|  | .offset	= 0x00000000, | 
|  | .size	= 0x00400000,		/* whole device		*/ | 
|  | /* NOTE: this parttion size is re-calcated in		*/ | 
|  | /* init_tqm834x_mtd() to cover actual device size.	*/ | 
|  | }, | 
|  | }; | 
|  |  | 
|  | #endif	/* CONFIG_MTD_PARTITIONS */ | 
|  |  | 
|  | static int __init init_tqm834x_mtd(void) | 
|  | { | 
|  | int idx = 0, ret = 0; | 
|  | unsigned long flash_addr, flash_size, mtd_size = 0; | 
|  |  | 
|  | /* pointer to TQM834x board info data */ | 
|  | bd_t *bd = (bd_t *)__res; | 
|  | #ifdef CONFIG_MTD_CMDLINE_PARTS | 
|  | int n; | 
|  | char mtdid[4]; | 
|  | const char *part_probes[] = { "cmdlinepart", NULL }; | 
|  | #endif | 
|  |  | 
|  | flash_addr = bd->bi_flashstart; | 
|  | flash_size = bd->bi_flashsize; | 
|  |  | 
|  | /* request maximum flash size address space */ | 
|  | start_scan_addr = (unsigned long)ioremap(flash_addr, flash_size); | 
|  | if (!start_scan_addr) { | 
|  | printk("%s: Failed to ioremap address: 0x%lx\n", | 
|  | __FUNCTION__, flash_addr); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) { | 
|  | if (mtd_size >= flash_size) | 
|  | break; | 
|  |  | 
|  | pr_debug("%s: chip probing count %d\n", __FUNCTION__, idx); | 
|  |  | 
|  | map_banks[idx] = | 
|  | (struct map_info *)kmalloc(sizeof(struct map_info), | 
|  | GFP_KERNEL); | 
|  | if (map_banks[idx] == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto error_mem; | 
|  | } | 
|  | memset((void *)map_banks[idx], 0, sizeof(struct map_info)); | 
|  | map_banks[idx]->name = (char *)kmalloc(16, GFP_KERNEL); | 
|  | if (map_banks[idx]->name == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto error_mem; | 
|  | } | 
|  | memset((void *)map_banks[idx]->name, 0, 16); | 
|  |  | 
|  | sprintf(map_banks[idx]->name, "TQM834x-%d", idx); | 
|  | map_banks[idx]->size = flash_size; | 
|  | map_banks[idx]->bankwidth = 4; | 
|  |  | 
|  | simple_map_init(map_banks[idx]); | 
|  |  | 
|  | map_banks[idx]->virt = (void __iomem *) | 
|  | (start_scan_addr + ((idx > 0) ? | 
|  | (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0)); | 
|  | map_banks[idx]->phys = | 
|  | flash_addr + ((idx > 0) ? | 
|  | (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0); | 
|  |  | 
|  | /* start to probe flash chips */ | 
|  | mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]); | 
|  | if (mtd_banks[idx]) { | 
|  | mtd_banks[idx]->owner = THIS_MODULE; | 
|  | mtd_size += mtd_banks[idx]->size; | 
|  | num_banks++; | 
|  | pr_debug("%s: bank %ld, name: %s, size: %d bytes \n", | 
|  | __FUNCTION__, num_banks, | 
|  | mtd_banks[idx]->name, mtd_banks[idx]->size); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* no supported flash chips found */ | 
|  | if (!num_banks) { | 
|  | printk("TQM834x: No supported flash chips found!\n"); | 
|  | ret = -ENXIO; | 
|  | goto error_mem; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MTD_PARTITIONS | 
|  | /* | 
|  | * Select static partition definitions | 
|  | */ | 
|  | n = ARRAY_SIZE(tqm834x_partitions_bank1); | 
|  | part_banks[0].mtd_part	= tqm834x_partitions_bank1; | 
|  | part_banks[0].type	= "static image bank1"; | 
|  | part_banks[0].nums	= n; | 
|  |  | 
|  | /* update last partition size to cover actual remaining space */ | 
|  | tqm834x_partitions_bank1[n - 1].size = | 
|  | mtd_banks[0]->size - | 
|  | tqm834x_partitions_bank1[n - 1].offset; | 
|  |  | 
|  | /* check if we have second bank? */ | 
|  | if (num_banks == 2) { | 
|  | n = ARRAY_SIZE(tqm834x_partitions_bank2); | 
|  | part_banks[1].mtd_part	= tqm834x_partitions_bank2; | 
|  | part_banks[1].type	= "static image bank2"; | 
|  | part_banks[1].nums	= n; | 
|  |  | 
|  | /* update last partition size to cover actual remaining space */ | 
|  | tqm834x_partitions_bank2[n - 1].size = | 
|  | mtd_banks[1]->size - | 
|  | tqm834x_partitions_bank2[n - 1].offset; | 
|  | } | 
|  |  | 
|  | for(idx = 0; idx < num_banks ; idx++) { | 
|  | #ifdef CONFIG_MTD_CMDLINE_PARTS | 
|  | sprintf(mtdid, "%d", idx); | 
|  | n = parse_mtd_partitions(mtd_banks[idx], | 
|  | part_probes, | 
|  | &part_banks[idx].mtd_part, | 
|  | 0); | 
|  | pr_debug("%s: %d command line partitions on bank %s\n", | 
|  | __FUNCTION__, n, mtdid); | 
|  | if (n > 0) { | 
|  | part_banks[idx].type = "command line"; | 
|  | part_banks[idx].nums = n; | 
|  | } | 
|  | #endif	/* CONFIG_MTD_CMDLINE_PARTS */ | 
|  | if (part_banks[idx].nums == 0) { | 
|  | printk(KERN_NOTICE | 
|  | "TQM834x flash bank %d: no partition info " | 
|  | "available, registering whole device\n", idx); | 
|  | add_mtd_device(mtd_banks[idx]); | 
|  | } else { | 
|  | printk(KERN_NOTICE | 
|  | "TQM834x flash bank %d: Using %s partition " | 
|  | "definition\n", idx, part_banks[idx].type); | 
|  | add_mtd_partitions(mtd_banks[idx], | 
|  | part_banks[idx].mtd_part, | 
|  | part_banks[idx].nums); | 
|  | } | 
|  | } | 
|  | #else	/* ! CONFIG_MTD_PARTITIONS */ | 
|  | printk(KERN_NOTICE "TQM834x flash: registering %d flash banks " | 
|  | "at once\n", num_banks); | 
|  |  | 
|  | for(idx = 0 ; idx < num_banks ; idx++) | 
|  | add_mtd_device(mtd_banks[idx]); | 
|  |  | 
|  | #endif	/* CONFIG_MTD_PARTITIONS */ | 
|  |  | 
|  | return 0; | 
|  | error_mem: | 
|  | for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) { | 
|  | if (map_banks[idx] != NULL) { | 
|  | if (map_banks[idx]->name != NULL) { | 
|  | kfree(map_banks[idx]->name); | 
|  | map_banks[idx]->name = NULL; | 
|  | } | 
|  | kfree(map_banks[idx]); | 
|  | map_banks[idx] = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | iounmap((void *)start_scan_addr); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit cleanup_tqm834x_mtd(void) | 
|  | { | 
|  | unsigned int idx = 0; | 
|  | for(idx = 0 ; idx < num_banks ; idx++) { | 
|  | /* destroy mtd_info previously allocated */ | 
|  | if (mtd_banks[idx]) { | 
|  | del_mtd_partitions(mtd_banks[idx]); | 
|  | map_destroy(mtd_banks[idx]); | 
|  | } | 
|  |  | 
|  | /* release map_info not used anymore */ | 
|  | kfree(map_banks[idx]->name); | 
|  | kfree(map_banks[idx]); | 
|  | } | 
|  |  | 
|  | if (start_scan_addr) { | 
|  | iounmap((void *)start_scan_addr); | 
|  | start_scan_addr = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | module_init(init_tqm834x_mtd); | 
|  | module_exit(cleanup_tqm834x_mtd); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Wolfgang Denk <wd@denx.de>"); | 
|  | MODULE_DESCRIPTION("MTD map driver for TQM834x boards"); |