arch/cris/kernel/time.c

/* $Id: time.c,v 1.18 2005/03/04 08:16:17 starvik Exp $
 *
 *  linux/arch/cris/kernel/time.c
 *
 *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
 *  Copyright (C) 1999, 2000, 2001 Axis Communications AB
 *
 * 1994-07-02    Alan Modra
 *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
 * 1995-03-26    Markus Kuhn
 *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
 *      precision CMOS clock update
 * 1996-05-03    Ingo Molnar
 *      fixed time warps in do_[slow|fast]_gettimeoffset()
 * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
 *		"A Kernel Model for Precision Timekeeping" by Dave Mills
 *
 * Linux/CRIS specific code:
 *
 * Authors:    Bjorn Wesen
 *             Johan Adolfsson  
 *
 */

#include <asm/rtc.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/param.h>
#include <linux/jiffies.h>
#include <linux/bcd.h>
#include <linux/timex.h>
#include <linux/init.h>
#include <linux/profile.h>
#include <linux/sched.h>	/* just for sched_clock() - funny that */

int have_rtc;  /* used to remember if we have an RTC or not */;

#define TICK_SIZE tick

extern unsigned long loops_per_jiffy; /* init/main.c */
unsigned long loops_per_usec;

extern unsigned long do_slow_gettimeoffset(void);
static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;

/*
 * This version of gettimeofday has near microsecond resolution.
 *
 * Note: Division is quite slow on CRIS and do_gettimeofday is called
 *       rather often. Maybe we should do some kind of approximation here
 *       (a naive approximation would be to divide by 1024).
 */
void do_gettimeofday(struct timeval *tv)
{
	unsigned long flags;
	signed long usec, sec;
	local_irq_save(flags);
	usec = do_gettimeoffset();

        /*
	 * If time_adjust is negative then NTP is slowing the clock
	 * so make sure not to go into next possible interval.
	 * Better to lose some accuracy than have time go backwards..
	 */
	if (unlikely(time_adjust < 0) && usec > tickadj)
		usec = tickadj;

	sec = xtime.tv_sec;
	usec += xtime.tv_nsec / 1000;
	local_irq_restore(flags);

	while (usec >= 1000000) {
		usec -= 1000000;
		sec++;
	}

	tv->tv_sec = sec;
	tv->tv_usec = usec;
}

EXPORT_SYMBOL(do_gettimeofday);

int do_settimeofday(struct timespec *tv)
{
	time_t wtm_sec, sec = tv->tv_sec;
	long wtm_nsec, nsec = tv->tv_nsec;

	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
		return -EINVAL;

	write_seqlock_irq(&xtime_lock);
	/*
	 * This is revolting. We need to set "xtime" correctly. However, the
	 * value in this location is the value at the most recent update of
	 * wall time.  Discover what correction gettimeofday() would have
	 * made, and then undo it!
	 */
	nsec -= do_gettimeoffset() * NSEC_PER_USEC;

	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);

	set_normalized_timespec(&xtime, sec, nsec);
	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);

	ntp_clear();
	write_sequnlock_irq(&xtime_lock);
	clock_was_set();
	return 0;
}

EXPORT_SYMBOL(do_settimeofday);


/*
 * BUG: This routine does not handle hour overflow properly; it just
 *      sets the minutes. Usually you'll only notice that after reboot!
 */

int set_rtc_mmss(unsigned long nowtime)
{
	int retval = 0;
	int real_seconds, real_minutes, cmos_minutes;

	printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime);

	if(!have_rtc)
		return 0;

	cmos_minutes = CMOS_READ(RTC_MINUTES);
	BCD_TO_BIN(cmos_minutes);

	/*
	 * since we're only adjusting minutes and seconds,
	 * don't interfere with hour overflow. This avoids
	 * messing with unknown time zones but requires your
	 * RTC not to be off by more than 15 minutes
	 */
	real_seconds = nowtime % 60;
	real_minutes = nowtime / 60;
	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
		real_minutes += 30;		/* correct for half hour time zone */
	real_minutes %= 60;

	if (abs(real_minutes - cmos_minutes) < 30) {
		BIN_TO_BCD(real_seconds);
		BIN_TO_BCD(real_minutes);
		CMOS_WRITE(real_seconds,RTC_SECONDS);
		CMOS_WRITE(real_minutes,RTC_MINUTES);
	} else {
		printk(KERN_WARNING
		       "set_rtc_mmss: can't update from %d to %d\n",
		       cmos_minutes, real_minutes);
		retval = -1;
	}

	return retval;
}

/* grab the time from the RTC chip */

unsigned long
get_cmos_time(void)
{
	unsigned int year, mon, day, hour, min, sec;

	sec = CMOS_READ(RTC_SECONDS);
	min = CMOS_READ(RTC_MINUTES);
	hour = CMOS_READ(RTC_HOURS);
	day = CMOS_READ(RTC_DAY_OF_MONTH);
	mon = CMOS_READ(RTC_MONTH);
	year = CMOS_READ(RTC_YEAR);

	printk(KERN_DEBUG
	       "rtc: sec 0x%x min 0x%x hour 0x%x day 0x%x mon 0x%x year 0x%x\n",
	       sec, min, hour, day, mon, year);

	BCD_TO_BIN(sec);
	BCD_TO_BIN(min);
	BCD_TO_BIN(hour);
	BCD_TO_BIN(day);
	BCD_TO_BIN(mon);
	BCD_TO_BIN(year);

	if ((year += 1900) < 1970)
		year += 100;

	return mktime(year, mon, day, hour, min, sec);
}

/* update xtime from the CMOS settings. used when /dev/rtc gets a SET_TIME.
 * TODO: this doesn't reset the fancy NTP phase stuff as do_settimeofday does.
 */

void
update_xtime_from_cmos(void)
{
	if(have_rtc) {
		xtime.tv_sec = get_cmos_time();
		xtime.tv_nsec = 0;
	}
}

extern void cris_profile_sample(struct pt_regs* regs);

void
cris_do_profile(struct pt_regs* regs)
{

#if CONFIG_SYSTEM_PROFILER
        cris_profile_sample(regs);
#endif

#if CONFIG_PROFILING
        profile_tick(CPU_PROFILING, regs);
#endif
}

static int
__init init_udelay(void)
{
	loops_per_usec = (loops_per_jiffy * HZ) / 1000000;
	return 0;
}

__initcall(init_udelay);