msm: board-msm7627a-bt: Create separate board file for BT-FM
Change-Id: I1e858a8074692ddc97a413595602a7d1d202e472
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-qrd7627a.c b/arch/arm/mach-msm/board-qrd7627a.c
index e8f6443..109d98d 100644
--- a/arch/arm/mach-msm/board-qrd7627a.c
+++ b/arch/arm/mach-msm/board-qrd7627a.c
@@ -56,8 +56,6 @@
#define PMEM_KERNEL_EBI1_SIZE 0x3A000
#define MSM_PMEM_AUDIO_SIZE 0x5B000
-#define BAHAMA_SLAVE_ID_FM_ADDR 0x2A
-#define BAHAMA_SLAVE_ID_QMEMBIST_ADDR 0x7B
#define BAHAMA_SLAVE_ID_FM_REG 0x02
#define FM_GPIO 83
#define BT_PCM_BCLK_MODE 0x88
@@ -84,949 +82,11 @@
GPIO_CAM_GP_CAMIF_RESET,
};
- /* FM Platform power and shutdown routines */
-#define FPGA_MSM_CNTRL_REG2 0x90008010
-
-#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
-static int switch_pcm_i2s_reg_mode(int mode)
-{
- unsigned char reg = 0;
- int rc = -1;
- unsigned char set = I2C_PIN_CTL; /*SET PIN CTL mode*/
- unsigned char unset = I2C_NORMAL; /* UNSET PIN CTL MODE*/
- struct marimba config = { .mod_id = SLAVE_ID_BAHAMA};
-
- if (mode == 0) {
- /* as we need to switch path to FM we need to move
- BT AUX PCM lines to PIN CONTROL mode then move
- FM to normal mode.*/
- for (reg = BT_PCM_BCLK_MODE; reg <= BT_PCM_SYNC_MODE; reg++) {
- rc = marimba_write(&config, reg, &set, 1);
- if (rc < 0) {
- pr_err("pcm pinctl failed = %d", rc);
- goto err_all;
- }
- }
- for (reg = FM_I2S_SD_MODE; reg <= FM_I2S_SCK_MODE; reg++) {
- rc = marimba_write(&config, reg, &unset, 1);
- if (rc < 0) {
- pr_err("i2s normal failed = %d", rc);
- goto err_all;
- }
- }
- } else {
- /* as we need to switch path to AUXPCM we need to move
- FM I2S lines to PIN CONTROL mode then move
- BT AUX_PCM to normal mode.*/
- for (reg = FM_I2S_SD_MODE; reg <= FM_I2S_SCK_MODE; reg++) {
- rc = marimba_write(&config, reg, &set, 1);
- if (rc < 0) {
- pr_err("i2s pinctl failed = %d", rc);
- goto err_all;
- }
- }
- for (reg = BT_PCM_BCLK_MODE; reg <= BT_PCM_SYNC_MODE; reg++) {
- rc = marimba_write(&config, reg, &unset, 1);
- if (rc < 0) {
- pr_err("pcm normal failed = %d", rc);
- goto err_all;
- }
- }
- }
-
- return 0;
-
-err_all:
- return rc;
-}
-static void config_pcm_i2s_mode(int mode)
-{
- void __iomem *cfg_ptr;
- u8 reg2;
-
- cfg_ptr = ioremap_nocache(FPGA_MSM_CNTRL_REG2, sizeof(char));
-
- if (!cfg_ptr)
- return;
- if (mode) {
- /*enable the pcm mode in FPGA*/
- reg2 = readb_relaxed(cfg_ptr);
- if (reg2 == 0) {
- reg2 = 1;
- writeb_relaxed(reg2, cfg_ptr);
- }
- } else {
- /*enable i2s mode in FPGA*/
- reg2 = readb_relaxed(cfg_ptr);
- if (reg2 == 1) {
- reg2 = 0;
- writeb_relaxed(reg2, cfg_ptr);
- }
- }
- iounmap(cfg_ptr);
-}
-
-static unsigned fm_i2s_config_power_on[] = {
- /*FM_I2S_SD*/
- GPIO_CFG(68, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- /*FM_I2S_WS*/
- GPIO_CFG(70, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- /*FM_I2S_SCK*/
- GPIO_CFG(71, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
-};
-
-static unsigned fm_i2s_config_power_off[] = {
- /*FM_I2S_SD*/
- GPIO_CFG(68, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- /*FM_I2S_WS*/
- GPIO_CFG(70, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- /*FM_I2S_SCK*/
- GPIO_CFG(71, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
-};
-
-static unsigned bt_config_power_on[] = {
- /*RFR*/
- GPIO_CFG(43, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- /*CTS*/
- GPIO_CFG(44, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- /*RX*/
- GPIO_CFG(45, 2, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- /*TX*/
- GPIO_CFG(46, 2, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
-};
-static unsigned bt_config_pcm_on[] = {
- /*PCM_DOUT*/
- GPIO_CFG(68, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- /*PCM_DIN*/
- GPIO_CFG(69, 1, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- /*PCM_SYNC*/
- GPIO_CFG(70, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
- /*PCM_CLK*/
- GPIO_CFG(71, 1, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_2MA),
-};
-static unsigned bt_config_power_off[] = {
- /*RFR*/
- GPIO_CFG(43, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- /*CTS*/
- GPIO_CFG(44, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- /*RX*/
- GPIO_CFG(45, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- /*TX*/
- GPIO_CFG(46, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
-};
-static unsigned bt_config_pcm_off[] = {
- /*PCM_DOUT*/
- GPIO_CFG(68, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- /*PCM_DIN*/
- GPIO_CFG(69, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- /*PCM_SYNC*/
- GPIO_CFG(70, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
- /*PCM_CLK*/
- GPIO_CFG(71, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_DOWN, GPIO_CFG_2MA),
-};
-
-
-static int config_i2s(int mode)
-{
- int pin, rc = 0;
-
- if (mode == FM_I2S_ON) {
- if (machine_is_msm7627a_qrd1())
- config_pcm_i2s_mode(0);
- pr_err("%s mode = FM_I2S_ON", __func__);
-
- rc = switch_pcm_i2s_reg_mode(0);
- if (rc) {
- pr_err("switch mode failed");
- return rc;
- }
- for (pin = 0; pin < ARRAY_SIZE(fm_i2s_config_power_on);
- pin++) {
- rc = gpio_tlmm_config(
- fm_i2s_config_power_on[pin],
- GPIO_CFG_ENABLE
- );
- if (rc < 0)
- return rc;
- }
- } else if (mode == FM_I2S_OFF) {
- pr_err("%s mode = FM_I2S_OFF", __func__);
- rc = switch_pcm_i2s_reg_mode(1);
- if (rc) {
- pr_err("switch mode failed");
- return rc;
- }
- for (pin = 0; pin < ARRAY_SIZE(fm_i2s_config_power_off);
- pin++) {
- rc = gpio_tlmm_config(
- fm_i2s_config_power_off[pin],
- GPIO_CFG_ENABLE
- );
- if (rc < 0)
- return rc;
- }
- }
- return rc;
-}
-static int config_pcm(int mode)
-{
- int pin, rc = 0;
-
- if (mode == BT_PCM_ON) {
- if (machine_is_msm7627a_qrd1())
- config_pcm_i2s_mode(1);
- pr_err("%s mode =BT_PCM_ON", __func__);
- rc = switch_pcm_i2s_reg_mode(1);
- if (rc) {
- pr_err("switch mode failed");
- return rc;
- }
- for (pin = 0; pin < ARRAY_SIZE(bt_config_pcm_on);
- pin++) {
- rc = gpio_tlmm_config(bt_config_pcm_on[pin],
- GPIO_CFG_ENABLE);
- if (rc < 0)
- return rc;
- }
- } else if (mode == BT_PCM_OFF) {
- pr_err("%s mode =BT_PCM_OFF", __func__);
- rc = switch_pcm_i2s_reg_mode(0);
- if (rc) {
- pr_err("switch mode failed");
- return rc;
- }
- for (pin = 0; pin < ARRAY_SIZE(bt_config_pcm_off);
- pin++) {
- rc = gpio_tlmm_config(bt_config_pcm_off[pin],
- GPIO_CFG_ENABLE);
- if (rc < 0)
- return rc;
- }
-
- }
-
- return rc;
-}
-
-static int msm_bahama_setup_pcm_i2s(int mode)
-{
- int fm_state = 0, bt_state = 0;
- int rc = 0;
- struct marimba config = { .mod_id = SLAVE_ID_BAHAMA};
-
- fm_state = marimba_get_fm_status(&config);
- bt_state = marimba_get_bt_status(&config);
-
- switch (mode) {
- case BT_PCM_ON:
- case BT_PCM_OFF:
- if (!fm_state)
- rc = config_pcm(mode);
- break;
- case FM_I2S_ON:
- rc = config_i2s(mode);
- break;
- case FM_I2S_OFF:
- if (bt_state)
- rc = config_pcm(BT_PCM_ON);
- else
- rc = config_i2s(mode);
- break;
- default:
- rc = -EIO;
- pr_err("%s:Unsupported mode", __func__);
- }
- return rc;
-}
-
-static int bt_set_gpio(int on)
-{
- int rc = 0;
- struct marimba config = { .mod_id = SLAVE_ID_BAHAMA};
-
- if (on) {
- rc = gpio_direction_output(GPIO_BT_SYS_REST_EN, 1);
- msleep(100);
- } else {
- if (!marimba_get_fm_status(&config) &&
- !marimba_get_bt_status(&config)) {
- gpio_set_value_cansleep(GPIO_BT_SYS_REST_EN, 0);
- rc = gpio_direction_input(GPIO_BT_SYS_REST_EN);
- msleep(100);
- }
- }
- if (rc)
- pr_err("%s: BT sys_reset_en GPIO : Error", __func__);
-
- return rc;
-}
-static struct regulator *fm_regulator;
-static int fm_radio_setup(struct marimba_fm_platform_data *pdata)
-{
- int rc = 0;
- const char *id = "FMPW";
- uint32_t irqcfg;
- struct marimba config = { .mod_id = SLAVE_ID_BAHAMA};
- u8 value;
-
- /* Voting for 1.8V Regulator */
- fm_regulator = regulator_get(NULL , "msme1");
- if (IS_ERR(fm_regulator)) {
- rc = PTR_ERR(fm_regulator);
- pr_err("%s: could not get regulator: %d\n", __func__, rc);
- goto out;
- }
-
- /* Set the voltage level to 1.8V */
- rc = regulator_set_voltage(fm_regulator, 1800000, 1800000);
- if (rc < 0) {
- pr_err("%s: could not set voltage: %d\n", __func__, rc);
- goto reg_free;
- }
-
- /* Enabling the 1.8V regulator */
- rc = regulator_enable(fm_regulator);
- if (rc) {
- pr_err("%s: could not enable regulator: %d\n", __func__, rc);
- goto reg_free;
- }
-
- /* Voting for 19.2MHz clock */
- rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
- PMAPP_CLOCK_VOTE_ON);
- if (rc < 0) {
- pr_err("%s: clock vote failed with :(%d)\n",
- __func__, rc);
- goto reg_disable;
- }
-
- rc = bt_set_gpio(1);
- if (rc) {
- pr_err("%s: bt_set_gpio = %d", __func__, rc);
- goto gpio_deconfig;
- }
- /*re-write FM Slave Id, after reset*/
- value = BAHAMA_SLAVE_ID_FM_ADDR;
- rc = marimba_write_bit_mask(&config,
- BAHAMA_SLAVE_ID_FM_REG, &value, 1, 0xFF);
- if (rc < 0) {
- pr_err("%s: FM Slave ID rewrite Failed = %d", __func__, rc);
- goto gpio_deconfig;
- }
- /* Configuring the FM GPIO */
- irqcfg = GPIO_CFG(FM_GPIO, 0, GPIO_CFG_INPUT, GPIO_CFG_NO_PULL,
- GPIO_CFG_2MA);
-
- rc = gpio_tlmm_config(irqcfg, GPIO_CFG_ENABLE);
- if (rc) {
- pr_err("%s: gpio_tlmm_config(%#x)=%d\n",
- __func__, irqcfg, rc);
- goto gpio_deconfig;
- }
-
- return 0;
-
-gpio_deconfig:
- pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
- PMAPP_CLOCK_VOTE_OFF);
- bt_set_gpio(0);
-reg_disable:
- regulator_disable(fm_regulator);
-reg_free:
- regulator_put(fm_regulator);
- fm_regulator = NULL;
-out:
- return rc;
-};
-
-static void fm_radio_shutdown(struct marimba_fm_platform_data *pdata)
-{
- int rc;
- const char *id = "FMPW";
-
- /* Releasing the GPIO line used by FM */
- uint32_t irqcfg = GPIO_CFG(FM_GPIO, 0, GPIO_CFG_INPUT, GPIO_CFG_PULL_UP,
- GPIO_CFG_2MA);
-
- rc = gpio_tlmm_config(irqcfg, GPIO_CFG_ENABLE);
- if (rc)
- pr_err("%s: gpio_tlmm_config(%#x)=%d\n",
- __func__, irqcfg, rc);
-
- /* Releasing the 1.8V Regulator */
- if (!IS_ERR_OR_NULL(fm_regulator)) {
- rc = regulator_disable(fm_regulator);
- if (rc)
- pr_err("%s: could not disable regulator: %d\n",
- __func__, rc);
- regulator_put(fm_regulator);
- fm_regulator = NULL;
- }
-
- /* Voting off the clock */
- rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
- PMAPP_CLOCK_VOTE_OFF);
- if (rc < 0)
- pr_err("%s: voting off failed with :(%d)\n",
- __func__, rc);
- rc = bt_set_gpio(0);
- if (rc)
- pr_err("%s: bt_set_gpio = %d", __func__, rc);
-}
-
-static struct marimba_fm_platform_data marimba_fm_pdata = {
- .fm_setup = fm_radio_setup,
- .fm_shutdown = fm_radio_shutdown,
- .irq = MSM_GPIO_TO_INT(FM_GPIO),
- .vreg_s2 = NULL,
- .vreg_xo_out = NULL,
- /* Configuring the FM SoC as I2S Master */
- .is_fm_soc_i2s_master = true,
- .config_i2s_gpio = msm_bahama_setup_pcm_i2s,
-};
-#endif
-
static struct platform_device msm_wlan_ar6000_pm_device = {
.name = "wlan_ar6000_pm_dev",
.id = -1,
};
-#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
-
-static struct platform_device msm_bt_power_device = {
- .name = "bt_power",
-};
-struct bahama_config_register {
- u8 reg;
- u8 value;
- u8 mask;
-};
-struct bt_vreg_info {
- const char *name;
- unsigned int pmapp_id;
- unsigned int min_level;
- unsigned int max_level;
- unsigned int is_pin_controlled;
- struct regulator *reg;
-};
-static struct bt_vreg_info bt_vregs[] = {
- {"msme1", 2, 1800000, 1800000, 0, NULL},
- {"bt", 21, 2900000, 3050000, 1, NULL}
-};
-
-static int bahama_bt(int on)
-{
- int rc = 0;
- int i;
-
- struct marimba config = { .mod_id = SLAVE_ID_BAHAMA};
-
- struct bahama_variant_register {
- const size_t size;
- const struct bahama_config_register *set;
- };
-
- const struct bahama_config_register *p;
-
- u8 version;
-
- const struct bahama_config_register v10_bt_on[] = {
- { 0xE9, 0x00, 0xFF },
- { 0xF4, 0x80, 0xFF },
- { 0xE4, 0x00, 0xFF },
- { 0xE5, 0x00, 0x0F },
-#ifdef CONFIG_WLAN
- { 0xE6, 0x38, 0x7F },
- { 0xE7, 0x06, 0xFF },
-#endif
- { 0xE9, 0x21, 0xFF },
- { 0x01, 0x0C, 0x1F },
- { 0x01, 0x08, 0x1F },
- };
-
- const struct bahama_config_register v20_bt_on_fm_off[] = {
- { 0x11, 0x0C, 0xFF },
- { 0x13, 0x01, 0xFF },
- { 0xF4, 0x80, 0xFF },
- { 0xF0, 0x00, 0xFF },
- { 0xE9, 0x00, 0xFF },
-#ifdef CONFIG_WLAN
- { 0x81, 0x00, 0x7F },
- { 0x82, 0x00, 0xFF },
- { 0xE6, 0x38, 0x7F },
- { 0xE7, 0x06, 0xFF },
-#endif
- { 0x8E, 0x15, 0xFF },
- { 0x8F, 0x15, 0xFF },
- { 0x90, 0x15, 0xFF },
-
- { 0xE9, 0x21, 0xFF },
- };
-
- const struct bahama_config_register v20_bt_on_fm_on[] = {
- { 0x11, 0x0C, 0xFF },
- { 0x13, 0x01, 0xFF },
- { 0xF4, 0x86, 0xFF },
- { 0xF0, 0x06, 0xFF },
- { 0xE9, 0x00, 0xFF },
-#ifdef CONFIG_WLAN
- { 0x81, 0x00, 0x7F },
- { 0x82, 0x00, 0xFF },
- { 0xE6, 0x38, 0x7F },
- { 0xE7, 0x06, 0xFF },
-#endif
- { 0xE9, 0x21, 0xFF },
- };
-
- const struct bahama_config_register v10_bt_off[] = {
- { 0xE9, 0x00, 0xFF },
- };
-
- const struct bahama_config_register v20_bt_off_fm_off[] = {
- { 0xF4, 0x84, 0xFF },
- { 0xF0, 0x04, 0xFF },
- { 0xE9, 0x00, 0xFF }
- };
-
- const struct bahama_config_register v20_bt_off_fm_on[] = {
- { 0xF4, 0x86, 0xFF },
- { 0xF0, 0x06, 0xFF },
- { 0xE9, 0x00, 0xFF }
- };
- const struct bahama_variant_register bt_bahama[2][3] = {
- {
- { ARRAY_SIZE(v10_bt_off), v10_bt_off },
- { ARRAY_SIZE(v20_bt_off_fm_off), v20_bt_off_fm_off },
- { ARRAY_SIZE(v20_bt_off_fm_on), v20_bt_off_fm_on }
- },
- {
- { ARRAY_SIZE(v10_bt_on), v10_bt_on },
- { ARRAY_SIZE(v20_bt_on_fm_off), v20_bt_on_fm_off },
- { ARRAY_SIZE(v20_bt_on_fm_on), v20_bt_on_fm_on }
- }
- };
-
- u8 offset = 0; /* index into bahama configs */
- on = on ? 1 : 0;
- version = marimba_read_bahama_ver(&config);
- if ((int)version < 0 || version == BAHAMA_VER_UNSUPPORTED) {
- dev_err(&msm_bt_power_device.dev, "%s: Bahama \
- version read Error, version = %d \n",
- __func__, version);
- return -EIO;
- }
-
- if (version == BAHAMA_VER_2_0) {
- if (marimba_get_fm_status(&config))
- offset = 0x01;
- }
-
- p = bt_bahama[on][version + offset].set;
-
- dev_info(&msm_bt_power_device.dev,
- "%s: found version %d\n", __func__, version);
-
- for (i = 0; i < bt_bahama[on][version + offset].size; i++) {
- u8 value = (p+i)->value;
- rc = marimba_write_bit_mask(&config,
- (p+i)->reg,
- &value,
- sizeof((p+i)->value),
- (p+i)->mask);
- if (rc < 0) {
- dev_err(&msm_bt_power_device.dev,
- "%s: reg %x write failed: %d\n",
- __func__, (p+i)->reg, rc);
- return rc;
- }
- dev_dbg(&msm_bt_power_device.dev,
- "%s: reg 0x%02x write value 0x%02x mask 0x%02x\n",
- __func__, (p+i)->reg,
- value, (p+i)->mask);
- value = 0;
- rc = marimba_read_bit_mask(&config,
- (p+i)->reg, &value,
- sizeof((p+i)->value), (p+i)->mask);
- if (rc < 0)
- dev_err(&msm_bt_power_device.dev, "%s marimba_read_bit_mask- error",
- __func__);
- dev_dbg(&msm_bt_power_device.dev,
- "%s: reg 0x%02x read value 0x%02x mask 0x%02x\n",
- __func__, (p+i)->reg,
- value, (p+i)->mask);
- }
- /* Update BT Status */
- if (on)
- marimba_set_bt_status(&config, true);
- else
- marimba_set_bt_status(&config, false);
- return rc;
-}
-static int bluetooth_switch_regulators(int on)
-{
- int i, rc = 0;
- const char *id = "BTPW";
-
- for (i = 0; i < ARRAY_SIZE(bt_vregs); i++) {
- if (IS_ERR_OR_NULL(bt_vregs[i].reg)) {
- rc = bt_vregs[i].reg ?
- PTR_ERR(bt_vregs[i].reg) :
- -ENODEV;
- dev_err(&msm_bt_power_device.dev,
- "%s: invalid regulator handle for %s: %d\n",
- __func__, bt_vregs[i].name, rc);
- goto reg_disable;
- }
-
- rc = on ? regulator_set_voltage(bt_vregs[i].reg,
- bt_vregs[i].min_level,
- bt_vregs[i].max_level) : 0;
- if (rc) {
- dev_err(&msm_bt_power_device.dev,
- "%s: could not set voltage for %s: %d\n",
- __func__, bt_vregs[i].name, rc);
- goto reg_disable;
- }
-
- rc = on ? regulator_enable(bt_vregs[i].reg) : 0;
- if (rc) {
- dev_err(&msm_bt_power_device.dev,
- "%s: could not %sable regulator %s: %d\n",
- __func__, "en", bt_vregs[i].name, rc);
- goto reg_disable;
- }
-
- if (bt_vregs[i].is_pin_controlled) {
- rc = pmapp_vreg_lpm_pincntrl_vote(id,
- bt_vregs[i].pmapp_id,
- PMAPP_CLOCK_ID_D1,
- on ? PMAPP_CLOCK_VOTE_ON :
- PMAPP_CLOCK_VOTE_OFF);
- if (rc) {
- dev_err(&msm_bt_power_device.dev,
- "%s: pin control failed for %s: %d\n",
- __func__, bt_vregs[i].name, rc);
- goto pin_cnt_fail;
- }
- }
- rc = on ? 0 : regulator_disable(bt_vregs[i].reg);
-
- if (rc) {
- dev_err(&msm_bt_power_device.dev,
- "%s: could not %sable regulator %s: %d\n",
- __func__, "dis", bt_vregs[i].name, rc);
- goto reg_disable;
- }
- }
-
- return rc;
-pin_cnt_fail:
- if (on)
- regulator_disable(bt_vregs[i].reg);
-reg_disable:
- while (i) {
- if (on) {
- i--;
- regulator_disable(bt_vregs[i].reg);
- regulator_put(bt_vregs[i].reg);
- }
- }
- return rc;
-}
-
-static struct regulator *reg_s3;
-static unsigned int msm_bahama_setup_power(void)
-{
- int rc = 0;
-
- reg_s3 = regulator_get(NULL, "msme1");
- if (IS_ERR(reg_s3)) {
- rc = PTR_ERR(reg_s3);
- pr_err("%s: could not get regulator: %d\n", __func__, rc);
- goto out;
- }
-
- rc = regulator_set_voltage(reg_s3, 1800000, 1800000);
- if (rc < 0) {
- pr_err("%s: could not set voltage: %d\n", __func__, rc);
- goto reg_fail;
- }
-
- rc = regulator_enable(reg_s3);
- if (rc < 0) {
- pr_err("%s: could not enable regulator: %d\n", __func__, rc);
- goto reg_fail;
- }
-
- gpio_tlmm_config(GPIO_CFG(GPIO_BT_SYS_REST_EN, 0,
- GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
- GPIO_CFG_2MA), GPIO_CFG_ENABLE);
-
- /*setup Bahama_sys_reset_n*/
- rc = gpio_request(GPIO_BT_SYS_REST_EN, "bahama sys_rst_n");
- if (rc < 0) {
- pr_err("%s: gpio_request %d = %d\n", __func__,
- GPIO_BT_SYS_REST_EN, rc);
- goto reg_disable;
- }
-
- rc = bt_set_gpio(1);
- if (rc < 0) {
- pr_err("%s: bt_set_gpio %d = %d\n", __func__,
- GPIO_BT_SYS_REST_EN, rc);
- goto gpio_fail;
- }
-
- return rc;
-
-gpio_fail:
- gpio_free(GPIO_BT_SYS_REST_EN);
-reg_disable:
- regulator_disable(reg_s3);
-reg_fail:
- regulator_put(reg_s3);
-out:
- reg_s3 = NULL;
- return rc;
-}
-
-static unsigned int msm_bahama_shutdown_power(int value)
-{
- int rc = 0;
-
- if (IS_ERR_OR_NULL(reg_s3)) {
- rc = reg_s3 ? PTR_ERR(reg_s3) : -ENODEV;
- goto out;
- }
-
- rc = regulator_disable(reg_s3);
- if (rc) {
- pr_err("%s: could not disable regulator: %d\n", __func__, rc);
- goto out;
- }
-
- if (value == BAHAMA_ID) {
- rc = bt_set_gpio(0);
- if (rc) {
- pr_err("%s: bt_set_gpio = %d\n",
- __func__, rc);
- goto reg_enable;
- }
- gpio_free(GPIO_BT_SYS_REST_EN);
- }
-
- regulator_put(reg_s3);
- reg_s3 = NULL;
-
- return 0;
-
-reg_enable:
- regulator_enable(reg_s3);
-out:
- return rc;
-}
-
-static unsigned int msm_bahama_core_config(int type)
-{
- int rc = 0;
-
- if (type == BAHAMA_ID) {
- int i;
- struct marimba config = { .mod_id = SLAVE_ID_BAHAMA};
- const struct bahama_config_register v20_init[] = {
- /* reg, value, mask */
- { 0xF4, 0x84, 0xFF }, /* AREG */
- { 0xF0, 0x04, 0xFF } /* DREG */
- };
- if (marimba_read_bahama_ver(&config) == BAHAMA_VER_2_0) {
- for (i = 0; i < ARRAY_SIZE(v20_init); i++) {
- u8 value = v20_init[i].value;
- rc = marimba_write_bit_mask(&config,
- v20_init[i].reg,
- &value,
- sizeof(v20_init[i].value),
- v20_init[i].mask);
- if (rc < 0) {
- pr_err("%s: reg %d write failed: %d\n",
- __func__, v20_init[i].reg, rc);
- return rc;
- }
- pr_debug("%s: reg 0x%02x value 0x%02x"
- " mask 0x%02x\n",
- __func__, v20_init[i].reg,
- v20_init[i].value, v20_init[i].mask);
- }
- }
- }
- rc = bt_set_gpio(0);
- if (rc) {
- pr_err("%s: bt_set_gpio = %d\n",
- __func__, rc);
- }
- pr_debug("core type: %d\n", type);
- return rc;
-}
-
-static int bluetooth_power(int on)
-{
- int pin, rc = 0;
- const char *id = "BTPW";
- int cid = 0;
-
- cid = adie_get_detected_connectivity_type();
- if (cid != BAHAMA_ID) {
- pr_err("%s: unexpected adie connectivity type: %d\n",
- __func__, cid);
- return -ENODEV;
- }
- if (on) {
- /*setup power for BT SOC*/
- rc = bt_set_gpio(on);
- if (rc) {
- pr_err("%s: bt_set_gpio = %d\n",
- __func__, rc);
- goto exit;
- }
- rc = bluetooth_switch_regulators(on);
- if (rc < 0) {
- pr_err("%s: bluetooth_switch_regulators rc = %d",
- __func__, rc);
- goto exit;
- }
- /*setup BT GPIO lines*/
- for (pin = 0; pin < ARRAY_SIZE(bt_config_power_on);
- pin++) {
- rc = gpio_tlmm_config(bt_config_power_on[pin],
- GPIO_CFG_ENABLE);
- if (rc < 0) {
- pr_err("%s: gpio_tlmm_config(%#x)=%d\n",
- __func__,
- bt_config_power_on[pin],
- rc);
- goto fail_power;
- }
- }
- /*Setup BT clocks*/
- rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
- PMAPP_CLOCK_VOTE_ON);
- if (rc < 0) {
- pr_err("Failed to vote for TCXO_D1 ON\n");
- goto fail_clock;
- }
- msleep(20);
-
- /*I2C config for Bahama*/
- rc = bahama_bt(1);
- if (rc < 0) {
- pr_err("%s: bahama_bt rc = %d", __func__, rc);
- goto fail_i2c;
- }
- msleep(20);
-
- /*setup BT PCM lines*/
- rc = msm_bahama_setup_pcm_i2s(BT_PCM_ON);
- if (rc < 0) {
- pr_err("%s: msm_bahama_setup_pcm_i2s , rc =%d\n",
- __func__, rc);
- goto fail_power;
- }
- rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
- PMAPP_CLOCK_VOTE_PIN_CTRL);
- if (rc < 0)
- pr_err("%s:Pin Control Failed, rc = %d",
- __func__, rc);
-
- } else {
- rc = bahama_bt(0);
- if (rc < 0)
- pr_err("%s: bahama_bt rc = %d", __func__, rc);
-
- rc = bt_set_gpio(on);
- if (rc) {
- pr_err("%s: bt_set_gpio = %d\n",
- __func__, rc);
- }
-fail_i2c:
- rc = pmapp_clock_vote(id, PMAPP_CLOCK_ID_D1,
- PMAPP_CLOCK_VOTE_OFF);
- if (rc < 0)
- pr_err("%s: Failed to vote Off D1\n", __func__);
-fail_clock:
- for (pin = 0; pin < ARRAY_SIZE(bt_config_power_off);
- pin++) {
- rc = gpio_tlmm_config(bt_config_power_off[pin],
- GPIO_CFG_ENABLE);
- if (rc < 0) {
- pr_err("%s: gpio_tlmm_config(%#x)=%d\n",
- __func__, bt_config_power_off[pin], rc);
- }
- }
- rc = msm_bahama_setup_pcm_i2s(BT_PCM_OFF);
- if (rc < 0) {
- pr_err("%s: msm_bahama_setup_pcm_i2s, rc =%d\n",
- __func__, rc);
- }
-fail_power:
- rc = bluetooth_switch_regulators(0);
- if (rc < 0) {
- pr_err("%s: switch_regulators : rc = %d",\
- __func__, rc);
- goto exit;
- }
- }
- return rc;
-exit:
- pr_err("%s: failed with rc = %d", __func__, rc);
- return rc;
-}
-
-static int __init bt_power_init(void)
-{
- int i, rc = 0;
- struct device *dev = &msm_bt_power_device.dev;
-
- for (i = 0; i < ARRAY_SIZE(bt_vregs); i++) {
- bt_vregs[i].reg = regulator_get(dev, bt_vregs[i].name);
- if (IS_ERR(bt_vregs[i].reg)) {
- rc = PTR_ERR(bt_vregs[i].reg);
- dev_err(dev, "%s: could not get regulator %s: %d\n",
- __func__, bt_vregs[i].name, rc);
- goto reg_get_fail;
- }
- }
-
- dev->platform_data = &bluetooth_power;
-
- return rc;
-
-reg_get_fail:
- while (i--) {
- regulator_put(bt_vregs[i].reg);
- bt_vregs[i].reg = NULL;
- }
- return rc;
-}
-
-static struct marimba_platform_data marimba_pdata = {
- .slave_id[SLAVE_ID_BAHAMA_FM] = BAHAMA_SLAVE_ID_FM_ADDR,
- .slave_id[SLAVE_ID_BAHAMA_QMEMBIST] = BAHAMA_SLAVE_ID_QMEMBIST_ADDR,
- .bahama_setup = msm_bahama_setup_power,
- .bahama_shutdown = msm_bahama_shutdown_power,
- .bahama_core_config = msm_bahama_core_config,
- .fm = &marimba_fm_pdata,
-};
-
-#endif
-
-#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
-static struct i2c_board_info bahama_devices[] = {
-{
- I2C_BOARD_INFO("marimba", 0xc),
- .platform_data = &marimba_pdata,
-},
-};
-#endif
-
static struct msm_gpio qup_i2c_gpios_io[] = {
{ GPIO_CFG(60, 0, GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL, GPIO_CFG_8MA),
"qup_scl" },
@@ -2299,10 +1359,7 @@
msm_fb_add_devices();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
- i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
- bahama_devices,
- ARRAY_SIZE(bahama_devices));
- bt_power_init();
+ msm7627a_bt_power_init();
#endif
msm_camera_vreg_init();