| /* |
| * P1021 MDS Device Tree Source |
| * |
| * Copyright 2010 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| / { |
| model = "fsl,P1021"; |
| compatible = "fsl,P1021MDS"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| serial0 = &serial0; |
| serial1 = &serial1; |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| ethernet2 = &enet2; |
| ethernet3 = &enet3; |
| ethernet4 = &enet4; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,P1021@0 { |
| device_type = "cpu"; |
| reg = <0x0>; |
| next-level-cache = <&L2>; |
| }; |
| |
| PowerPC,P1021@1 { |
| device_type = "cpu"; |
| reg = <0x1>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| }; |
| |
| localbus@ffe05000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; |
| reg = <0 0xffe05000 0 0x1000>; |
| interrupts = <19 2>; |
| interrupt-parent = <&mpic>; |
| |
| /* NAND Flash, BCSR, PMC0/1*/ |
| ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 |
| 0x1 0x0 0x0 0xf8000000 0x00008000 |
| 0x2 0x0 0x0 0xf8010000 0x00020000 |
| 0x3 0x0 0x0 0xf8020000 0x00020000>; |
| |
| nand@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,p1021-fcm-nand", |
| "fsl,elbc-fcm-nand"; |
| reg = <0x0 0x0 0x40000>; |
| |
| partition@0 { |
| /* This location must not be altered */ |
| /* 1MB for u-boot Bootloader Image */ |
| reg = <0x0 0x00100000>; |
| label = "NAND (RO) U-Boot Image"; |
| read-only; |
| }; |
| |
| partition@100000 { |
| /* 1MB for DTB Image */ |
| reg = <0x00100000 0x00100000>; |
| label = "NAND (RO) DTB Image"; |
| read-only; |
| }; |
| |
| partition@200000 { |
| /* 4MB for Linux Kernel Image */ |
| reg = <0x00200000 0x00400000>; |
| label = "NAND (RO) Linux Kernel Image"; |
| read-only; |
| }; |
| |
| partition@600000 { |
| /* 5MB for Compressed Root file System Image */ |
| reg = <0x00600000 0x00500000>; |
| label = "NAND (RO) Compressed RFS Image"; |
| read-only; |
| }; |
| |
| partition@b00000 { |
| /* 6MB for JFFS2 based Root file System */ |
| reg = <0x00a00000 0x00600000>; |
| label = "NAND (RW) JFFS2 Root File System"; |
| }; |
| |
| partition@1100000 { |
| /* 14MB for JFFS2 based Root file System */ |
| reg = <0x01100000 0x00e00000>; |
| label = "NAND (RW) Writable User area"; |
| }; |
| |
| partition@1f00000 { |
| /* 1MB for microcode */ |
| reg = <0x01f00000 0x00100000>; |
| label = "NAND (RO) QE Ucode"; |
| read-only; |
| }; |
| }; |
| |
| bcsr@1,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,p1021mds-bcsr"; |
| reg = <1 0 0x8000>; |
| ranges = <0 1 0 0x8000>; |
| }; |
| |
| pib@2,0 { |
| compatible = "fsl,p1021mds-pib"; |
| reg = <2 0 0x10000>; |
| }; |
| |
| pib@3,0 { |
| compatible = "fsl,p1021mds-pib"; |
| reg = <3 0 0x10000>; |
| }; |
| }; |
| |
| soc@ffe00000 { |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,p1021-immr", "simple-bus"; |
| ranges = <0x0 0x0 0xffe00000 0x100000>; |
| bus-frequency = <0>; // Filled out by uboot. |
| |
| ecm-law@0 { |
| compatible = "fsl,ecm-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <12>; |
| }; |
| |
| ecm@1000 { |
| compatible = "fsl,p1021-ecm", "fsl,ecm"; |
| reg = <0x1000 0x1000>; |
| interrupts = <16 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| memory-controller@2000 { |
| compatible = "fsl,p1021-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| rtc@68 { |
| compatible = "dallas,ds1374"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| spi@7000 { |
| cell-index = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,espi"; |
| reg = <0x7000 0x1000>; |
| interrupts = <59 0x2>; |
| interrupt-parent = <&mpic>; |
| espi,num-ss-bits = <4>; |
| mode = "cpu"; |
| |
| fsl_m25p80@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,espi-flash"; |
| reg = <0>; |
| linux,modalias = "fsl_m25p80"; |
| spi-max-frequency = <40000000>; /* input clock */ |
| partition@u-boot { |
| label = "u-boot-spi"; |
| reg = <0x00000000 0x00100000>; |
| read-only; |
| }; |
| partition@kernel { |
| label = "kernel-spi"; |
| reg = <0x00100000 0x00500000>; |
| read-only; |
| }; |
| partition@dtb { |
| label = "dtb-spi"; |
| reg = <0x00600000 0x00100000>; |
| read-only; |
| }; |
| partition@fs { |
| label = "file system-spi"; |
| reg = <0x00700000 0x00900000>; |
| }; |
| }; |
| }; |
| |
| gpio: gpio-controller@f000 { |
| #gpio-cells = <2>; |
| compatible = "fsl,mpc8572-gpio"; |
| reg = <0xf000 0x100>; |
| interrupts = <47 0x2>; |
| interrupt-parent = <&mpic>; |
| gpio-controller; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,p1021-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; // 32 bytes |
| cache-size = <0x40000>; // L2,256K |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| usb@22000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl-usb2-dr"; |
| reg = <0x22000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <28 0x2>; |
| phy_type = "ulpi"; |
| }; |
| |
| mdio@24000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,etsec2-mdio"; |
| reg = <0x24000 0x1000 0xb0030 0x4>; |
| |
| phy0: ethernet-phy@0 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1>; |
| reg = <0x0>; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1>; |
| reg = <0x1>; |
| }; |
| phy4: ethernet-phy@4 { |
| interrupt-parent = <&mpic>; |
| reg = <0x4>; |
| }; |
| }; |
| |
| mdio@25000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,etsec2-tbi"; |
| reg = <0x25000 0x1000 0xb1030 0x4>; |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| enet0: ethernet@B0000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy0>; |
| phy-connection-type = "rgmii-id"; |
| queue-group@0{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB0000 0x1000>; |
| interrupts = <29 2 30 2 34 2>; |
| }; |
| queue-group@1{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB4000 0x1000>; |
| interrupts = <17 2 18 2 24 2>; |
| }; |
| }; |
| |
| enet1: ethernet@B1000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy4>; |
| tbi-handle = <&tbi0>; |
| phy-connection-type = "sgmii"; |
| queue-group@0{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB1000 0x1000>; |
| interrupts = <35 2 36 2 40 2>; |
| }; |
| queue-group@1{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB5000 0x1000>; |
| interrupts = <51 2 52 2 67 2>; |
| }; |
| }; |
| |
| enet2: ethernet@B2000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "fsl,etsec2"; |
| fsl,num_rx_queues = <0x8>; |
| fsl,num_tx_queues = <0x8>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy1>; |
| phy-connection-type = "rgmii-id"; |
| queue-group@0{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB2000 0x1000>; |
| interrupts = <31 2 32 2 33 2>; |
| }; |
| queue-group@1{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xB6000 0x1000>; |
| interrupts = <25 2 26 2 27 2>; |
| }; |
| }; |
| |
| sdhci@2e000 { |
| compatible = "fsl,p1021-esdhc", "fsl,esdhc"; |
| reg = <0x2e000 0x1000>; |
| interrupts = <72 0x2>; |
| interrupt-parent = <&mpic>; |
| /* Filled in by U-Boot */ |
| clock-frequency = <0>; |
| }; |
| |
| crypto@30000 { |
| compatible = "fsl,sec3.3", "fsl,sec3.1", |
| "fsl,sec3.0", "fsl,sec2.4", |
| "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; |
| reg = <0x30000 0x10000>; |
| interrupts = <45 2 58 2>; |
| interrupt-parent = <&mpic>; |
| fsl,num-channels = <4>; |
| fsl,channel-fifo-len = <24>; |
| fsl,exec-units-mask = <0x97c>; |
| fsl,descriptor-types-mask = <0x3a30abf>; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| |
| msi@41600 { |
| compatible = "fsl,p1021-msi", "fsl,mpic-msi"; |
| reg = <0x41600 0x80>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 |
| 0xe1 0 |
| 0xe2 0 |
| 0xe3 0 |
| 0xe4 0 |
| 0xe5 0 |
| 0xe6 0 |
| 0xe7 0>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities block |
| compatible = "fsl,p1021-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| |
| par_io@e0100 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0xe0100 0x60>; |
| ranges = <0x0 0xe0100 0x60>; |
| device_type = "par_io"; |
| num-ports = <3>; |
| pio1: ucc_pin@01 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ |
| 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ |
| 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ |
| 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 |
| */ |
| 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ |
| 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ |
| 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ |
| 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ |
| 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ |
| 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ |
| 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ |
| 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ |
| 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ |
| 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ |
| 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ |
| 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ |
| 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ |
| 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ |
| }; |
| |
| pio2: ucc_pin@02 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ |
| 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ |
| 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ |
| 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ |
| 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ |
| 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ |
| 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ |
| 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ |
| 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ |
| 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ |
| }; |
| }; |
| }; |
| |
| pci0: pcie@ffe09000 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xffe09000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 4 1 |
| 0000 0 0 2 &mpic 5 1 |
| 0000 0 0 3 &mpic 6 1 |
| 0000 0 0 4 &mpic 7 1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xa0000000 |
| 0x2000000 0x0 0xa0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| |
| pci1: pcie@ffe0a000 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0 0xffe0a000 0 0x1000>; |
| bus-range = <0 255>; |
| ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 |
| 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 2>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 0 1 |
| 0000 0 0 2 &mpic 1 1 |
| 0000 0 0 3 &mpic 2 1 |
| 0000 0 0 4 &mpic 3 1 |
| >; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x2000000 0x0 0xc0000000 |
| 0x2000000 0x0 0xc0000000 |
| 0x0 0x20000000 |
| |
| 0x1000000 0x0 0x0 |
| 0x1000000 0x0 0x0 |
| 0x0 0x100000>; |
| }; |
| }; |
| |
| qe@ffe80000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "qe"; |
| compatible = "fsl,qe"; |
| ranges = <0x0 0x0 0xffe80000 0x40000>; |
| reg = <0 0xffe80000 0 0x480>; |
| brg-frequency = <0>; |
| bus-frequency = <0>; |
| fsl,qe-num-riscs = <1>; |
| fsl,qe-num-snums = <28>; |
| status = "disabled"; /* no firmware loaded */ |
| |
| qeic: interrupt-controller@80 { |
| interrupt-controller; |
| compatible = "fsl,qe-ic"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| reg = <0x80 0x80>; |
| interrupts = <63 2 60 2>; //high:47 low:44 |
| interrupt-parent = <&mpic>; |
| }; |
| |
| enet3: ucc@2000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <1>; |
| reg = <0x2000 0x200>; |
| interrupts = <32>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "clk12"; |
| tx-clock-name = "clk9"; |
| pio-handle = <&pio1>; |
| phy-handle = <&qe_phy0>; |
| phy-connection-type = "mii"; |
| }; |
| |
| mdio@2120 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2120 0x18>; |
| compatible = "fsl,ucc-mdio"; |
| |
| qe_phy0: ethernet-phy@0 { |
| interrupt-parent = <&mpic>; |
| interrupts = <4 1>; |
| reg = <0x0>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy1: ethernet-phy@03 { |
| interrupt-parent = <&mpic>; |
| interrupts = <5 1>; |
| reg = <0x3>; |
| device_type = "ethernet-phy"; |
| }; |
| tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| |
| enet4: ucc@2400 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| cell-index = <5>; |
| reg = <0x2400 0x200>; |
| interrupts = <40>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk13"; |
| pio-handle = <&pio2>; |
| phy-handle = <&qe_phy1>; |
| phy-connection-type = "rmii"; |
| }; |
| |
| muram@10000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,qe-muram", "fsl,cpm-muram"; |
| ranges = <0x0 0x10000 0x6000>; |
| |
| data-only@0 { |
| compatible = "fsl,qe-muram-data", |
| "fsl,cpm-muram-data"; |
| reg = <0x0 0x6000>; |
| }; |
| }; |
| }; |
| }; |