ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform data
Add platform data for MIPI-DSI and LCDC on the AG5EVM
board. The sh73a0 clkdev bindings are also updated.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index fb94162..2123b96 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -34,9 +34,10 @@
#include <linux/input/sh_keysc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
-
+#include <linux/sh_clk.h>
+#include <video/sh_mobile_lcdc.h>
+#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
-
#include <mach/hardware.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
@@ -203,12 +204,145 @@
.num_resources = ARRAY_SIZE(irda_resources),
};
+static unsigned char lcd_backlight_seq[3][2] = {
+ { 0x04, 0x07 },
+ { 0x23, 0x80 },
+ { 0x03, 0x01 },
+};
+
+static void lcd_backlight_on(void)
+{
+ struct i2c_adapter *a;
+ struct i2c_msg msg;
+ int k;
+
+ a = i2c_get_adapter(1);
+ for (k = 0; a && k < 3; k++) {
+ msg.addr = 0x6d;
+ msg.buf = &lcd_backlight_seq[k][0];
+ msg.len = 2;
+ msg.flags = 0;
+ if (i2c_transfer(a, &msg, 1) != 1)
+ break;
+ }
+}
+
+static void lcd_backlight_reset(void)
+{
+ gpio_set_value(GPIO_PORT235, 0);
+ mdelay(24);
+ gpio_set_value(GPIO_PORT235, 1);
+}
+
+static void lcd_on(void *board_data, struct fb_info *info)
+{
+ lcd_backlight_on();
+}
+
+static void lcd_off(void *board_data)
+{
+ lcd_backlight_reset();
+}
+
+/* LCDC0 */
+static const struct fb_videomode lcdc0_modes[] = {
+ {
+ .name = "R63302(QHD)",
+ .xres = 544,
+ .yres = 961,
+ .left_margin = 72,
+ .right_margin = 600,
+ .hsync_len = 16,
+ .upper_margin = 8,
+ .lower_margin = 8,
+ .vsync_len = 2,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+ },
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+ .clock_source = LCDC_CLK_PERIPHERAL,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .interface_type = RGB24,
+ .clock_divider = 1,
+ .flags = LCDC_FLAGS_DWPOL,
+ .lcd_size_cfg.width = 44,
+ .lcd_size_cfg.height = 79,
+ .bpp = 16,
+ .lcd_cfg = lcdc0_modes,
+ .num_cfg = ARRAY_SIZE(lcdc0_modes),
+ .board_cfg = {
+ .display_on = lcd_on,
+ .display_off = lcd_off,
+ },
+ }
+};
+
+static struct resource lcdc0_resources[] = {
+ [0] = {
+ .name = "LCDC0",
+ .start = 0xfe940000, /* P4-only space */
+ .end = 0xfe943fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x580),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc0_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc0_resources),
+ .resource = lcdc0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &lcdc0_info,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+/* MIPI-DSI */
+static struct resource mipidsi0_resources[] = {
+ [0] = {
+ .start = 0xfeab0000,
+ .end = 0xfeab3fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0xfeab4000,
+ .end = 0xfeab7fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct sh_mipi_dsi_info mipidsi0_info = {
+ .data_format = MIPI_RGB888,
+ .lcd_chan = &lcdc0_info.ch[0],
+ .vsynw_offset = 20,
+ .clksrc = 1,
+ .flags = SH_MIPI_DSI_HSABM,
+};
+
+static struct platform_device mipidsi0_device = {
+ .name = "sh-mipi-dsi",
+ .num_resources = ARRAY_SIZE(mipidsi0_resources),
+ .resource = mipidsi0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &mipidsi0_info,
+ },
+};
+
static struct platform_device *ag5evm_devices[] __initdata = {
ð_device,
&keysc_device,
&fsi_device,
&mmc_device,
&irda_device,
+ &lcdc0_device,
+ &mipidsi0_device,
};
static struct map_desc ag5evm_io_desc[] __initdata = {
@@ -245,6 +379,8 @@
__raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A);
}
+#define DSI0PHYCR 0xe615006c
+
static void __init ag5evm_init(void)
{
sh73a0_pinmux_init();
@@ -313,6 +449,20 @@
gpio_request(GPIO_FN_PORT242_IRDA_IN, NULL);
gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
+ /* LCD panel */
+ gpio_request(GPIO_PORT217, NULL); /* RESET */
+ gpio_direction_output(GPIO_PORT217, 0);
+ mdelay(1);
+ gpio_set_value(GPIO_PORT217, 1);
+
+ /* LCD backlight controller */
+ gpio_request(GPIO_PORT235, NULL); /* RESET */
+ gpio_direction_output(GPIO_PORT235, 0);
+ lcd_backlight_reset();
+
+ /* MIPI-DSI clock setup */
+ __raw_writel(0x2a809010, DSI0PHYCR);
+
#ifdef CONFIG_CACHE_L2X0
/* Shared attribute override enable, 64K*8way */
l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff);