USB: core: Add support for OTG automated compliance tests
1. Add OTG PET device to TPL. OTG device shall support this
device for allowing compliance automated testing.
2. Add otg_srp_reqd filed to gadget. OTG B-device shall enable
this flag when OTG PET (Protocol and Electrical Tester) that
acts as A-device sends Set Feature TEST_MODE with wIndex high
byte value = 0x06. OTG PET expects B-device to initiate SRP
after the end of current session.
3. Add otg_vbus_off to usb_bus. USB core enables this flag
when OTG PET enumerates with bcdDevice[0] field in its Device
Descriptor is equal to 1. OTG PET expects A-device to turn off
the VBUS with in 5 sec of its disconnection which allows it to
initiate SRP.
3. Add support to identify OTG PET and start HNP quickly.
Change-Id: Ib1f4d835d00ca29ff8f980c94d75a3890507dedc
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index e4ee15c..ea49aa1 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -133,6 +133,12 @@
#define TEST_PACKET 4
#define TEST_FORCE_EN 5
+/* OTG test mode feature bits
+ * See ECN OTG2.0 spec Table 6-8
+ */
+#define TEST_OTG_SRP_REQD 6
+#define TEST_OTG_HNP_REQD 7
+
/*
* New Feature Selectors as added by USB 3.0
* See USB 3.0 spec Table 9-6
@@ -146,9 +152,12 @@
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
-#define OTG_STATUS_SELECTOR 0xF000
+#define OTG_STATUS_SELECTOR 0xF000
+#define HOST_REQUEST_FLAG 0
#define THOST_REQ_POLL 1500 /* msec (1000 - 2000) */
-#define HOST_REQUEST_FLAG 0
+#define OTG_TTST_SUSP 70 /* msec (0 - 100) */
+
+#define OTG_TTST_VBUS_OFF 1
/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index a9c1b6a..35c9cd1 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -453,6 +453,9 @@
* only supports HNP on a different root port.
* @b_hnp_enable: OTG device feature flag, indicating that the A-Host
* enabled HNP support.
+ * @host_request: A flag set by user when wishes to take up host role.
+ * @otg_srp_reqd: OTG test mode feature to initiate SRP after the end of
+ * current session.
* @name: Identifies the controller hardware type. Used in diagnostics
* and sometimes configuration.
* @dev: Driver model state for this abstract device.
@@ -488,6 +491,7 @@
unsigned a_hnp_support:1;
unsigned a_alt_hnp_support:1;
unsigned host_request:1;
+ unsigned otg_srp_reqd:1;
const char *name;
struct device dev;
};
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 3e93de7..fb1ca8c 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -30,4 +30,6 @@
descriptor */
#define USB_QUIRK_DELAY_INIT 0x00000040
+#define USB_QUIRK_OTG_PET 0x00000080
+
#endif /* __LINUX_USB_QUIRKS_H */