iwlwifi: move RX handlers to iwl-rx.c
This patch moves RX handlers to iwl-rx.c
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index a607b39..499705f 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -613,36 +613,6 @@
}
}
-int iwl4965_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *header)
-{
- /* Filter incoming packets to determine if they are targeted toward
- * this network, discarding packets coming from ourselves */
- switch (priv->iw_mode) {
- case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source | BSSID */
- /* packets from our adapter are dropped (echo) */
- if (!compare_ether_addr(header->addr2, priv->mac_addr))
- return 0;
- /* {broad,multi}cast packets to our IBSS go through */
- if (is_multicast_ether_addr(header->addr1))
- return !compare_ether_addr(header->addr3, priv->bssid);
- /* packets to our adapter go through */
- return !compare_ether_addr(header->addr1, priv->mac_addr);
- case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */
- /* packets from our adapter are dropped (echo) */
- if (!compare_ether_addr(header->addr3, priv->mac_addr))
- return 0;
- /* {broad,multi}cast packets to our BSS go through */
- if (is_multicast_ether_addr(header->addr1))
- return !compare_ether_addr(header->addr2, priv->bssid);
- /* packets to our adapter go through */
- return !compare_ether_addr(header->addr1, priv->mac_addr);
- default:
- break;
- }
-
- return 1;
-}
-
static void iwl4965_sequence_reset(struct iwl_priv *priv)
{
/* Reset ieee stats */
@@ -906,72 +876,6 @@
(IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
}
-#define IWL_PACKET_RETRY_TIME HZ
-
-int iwl4965_is_duplicate_packet(struct iwl_priv *priv, struct ieee80211_hdr *header)
-{
- u16 sc = le16_to_cpu(header->seq_ctrl);
- u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
- u16 frag = sc & IEEE80211_SCTL_FRAG;
- u16 *last_seq, *last_frag;
- unsigned long *last_time;
-
- switch (priv->iw_mode) {
- case IEEE80211_IF_TYPE_IBSS:{
- struct list_head *p;
- struct iwl4965_ibss_seq *entry = NULL;
- u8 *mac = header->addr2;
- int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1);
-
- __list_for_each(p, &priv->ibss_mac_hash[index]) {
- entry = list_entry(p, struct iwl4965_ibss_seq, list);
- if (!compare_ether_addr(entry->mac, mac))
- break;
- }
- if (p == &priv->ibss_mac_hash[index]) {
- entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
- if (!entry) {
- IWL_ERROR("Cannot malloc new mac entry\n");
- return 0;
- }
- memcpy(entry->mac, mac, ETH_ALEN);
- entry->seq_num = seq;
- entry->frag_num = frag;
- entry->packet_time = jiffies;
- list_add(&entry->list, &priv->ibss_mac_hash[index]);
- return 0;
- }
- last_seq = &entry->seq_num;
- last_frag = &entry->frag_num;
- last_time = &entry->packet_time;
- break;
- }
- case IEEE80211_IF_TYPE_STA:
- last_seq = &priv->last_seq_num;
- last_frag = &priv->last_frag_num;
- last_time = &priv->last_packet_time;
- break;
- default:
- return 0;
- }
- if ((*last_seq == seq) &&
- time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) {
- if (*last_frag == frag)
- goto drop;
- if (*last_frag + 1 != frag)
- /* out-of-order fragment */
- goto drop;
- } else
- *last_seq = seq;
-
- *last_frag = frag;
- *last_time = jiffies;
- return 0;
-
- drop:
- return 1;
-}
-
#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
#include "iwl-spectrum.h"
@@ -1350,17 +1254,6 @@
wake_up_interruptible(&priv->wait_command_queue);
}
-/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
- * This will be used later in iwl4965_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
-static void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv,
- struct iwl_rx_mem_buffer *rxb)
-{
- struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
- priv->last_phy_res[0] = 1;
- memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
- sizeof(struct iwl4965_rx_phy_res));
-}
-
/**
* iwl4965_setup_rx_handlers - Initialize Rx handler callbacks
*
@@ -1398,8 +1291,8 @@
priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
iwl_rx_missed_beacon_notif;
/* Rx handlers */
- priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy;
- priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx;
+ priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy;
+ priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx;
/* Set up hardware specific Rx handlers */
priv->cfg->ops->lib->rx_handler_setup(priv);
}
@@ -1530,47 +1423,6 @@
iwl_rx_queue_restock(priv);
}
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
#ifdef CONFIG_IWLWIFI_DEBUG
static void iwl4965_print_rx_config_cmd(struct iwl_priv *priv)
{