ARM: ux500: pass parent pointer to each platform device
This patch provides a means for any device within ux500
platform code to allocate its own parent. This is particularly
prudent with the introduction of /sys/devices/socX, as a
device can now proclaim to be integral part of an SoC, rather
than a more generic platform device. Latter patches make good
use of this functionality.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5c00712..f9ce2a1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -226,7 +226,12 @@
static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
{
- mop500_sdi_tc35892_init();
+ struct device *parent = NULL;
+#if 0
+ /* FIXME: Is the sdi actually part of tc3589x? */
+ parent = tc3589x->dev;
+#endif
+ mop500_sdi_tc35892_init(parent);
}
static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -353,12 +358,12 @@
U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
{
- db8500_add_i2c0(&u8500_i2c0_data);
- db8500_add_i2c1(&u8500_i2c1_data);
- db8500_add_i2c2(&u8500_i2c2_data);
- db8500_add_i2c3(&u8500_i2c3_data);
+ db8500_add_i2c0(parent, &u8500_i2c0_data);
+ db8500_add_i2c1(parent, &u8500_i2c1_data);
+ db8500_add_i2c2(parent, &u8500_i2c2_data);
+ db8500_add_i2c3(parent, &u8500_i2c3_data);
}
static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -451,9 +456,9 @@
.num_chipselect = 5,
};
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
{
- db8500_add_ssp0(&ssp0_platform_data);
+ db8500_add_ssp0(parent, &ssp0_platform_data);
}
#ifdef CONFIG_STE_DMA40
@@ -587,11 +592,11 @@
#endif
};
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
{
- db8500_add_uart0(&uart0_plat);
- db8500_add_uart1(&uart1_plat);
- db8500_add_uart2(&uart2_plat);
+ db8500_add_uart0(parent, &uart0_plat);
+ db8500_add_uart1(parent, &uart1_plat);
+ db8500_add_uart2(parent, &uart2_plat);
}
static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -603,21 +608,22 @@
static void __init mop500_init_machine(void)
{
+ struct device *parent = NULL;
int i2c0_devs;
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
- u8500_init_devices();
+ parent = u8500_init_devices();
mop500_pins_init();
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
- mop500_i2c_init();
- mop500_sdi_init();
- mop500_spi_init();
- mop500_uart_init();
+ mop500_i2c_init(parent);
+ mop500_sdi_init(parent);
+ mop500_spi_init(parent);
+ mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
@@ -631,19 +637,20 @@
static void __init snowball_init_machine(void)
{
+ struct device *parent = NULL;
int i2c0_devs;
- u8500_init_devices();
+ parent = u8500_init_devices();
snowball_pins_init();
platform_add_devices(snowball_platform_devs,
ARRAY_SIZE(snowball_platform_devs));
- mop500_i2c_init();
- snowball_sdi_init();
- mop500_spi_init();
- mop500_uart_init();
+ mop500_i2c_init(parent);
+ snowball_sdi_init(parent);
+ mop500_spi_init(parent);
+ mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -656,6 +663,7 @@
static void __init hrefv60_init_machine(void)
{
+ struct device *parent = NULL;
int i2c0_devs;
/*
@@ -665,17 +673,17 @@
*/
mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- u8500_init_devices();
+ parent = u8500_init_devices();
hrefv60_pins_init();
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
- mop500_i2c_init();
- hrefv60_sdi_init();
- mop500_spi_init();
- mop500_uart_init();
+ mop500_i2c_init(parent);
+ hrefv60_sdi_init(parent);
+ mop500_spi_init(parent);
+ mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);