drivers/net/fs_enet/mii-bitbang.c - android_kernel_htc_msm8960 - Gitiles

 /*
  * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
  *
  * Copyright (c) 2003 Intracom S.A.
  *  by Pantelis Antoniou <panto@intracom.gr>
  *
  * 2005 (c) MontaVista Software, Inc.
  * Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */


 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/ptrace.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/bitops.h>

 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>

 #include "fs_enet.h"

 #ifdef CONFIG_8xx
 static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
 {
 	immap_t *im = (immap_t *)fs_enet_immap;
 	void *dir, *dat, *ppar;
 	int adv;
 	u8 msk;

 	switch (port) {
 		case fsiop_porta:
 			dir = &im->im_ioport.iop_padir;
 			dat = &im->im_ioport.iop_padat;
 			ppar = &im->im_ioport.iop_papar;
 			break;

 		case fsiop_portb:
 			dir = &im->im_cpm.cp_pbdir;
 			dat = &im->im_cpm.cp_pbdat;
 			ppar = &im->im_cpm.cp_pbpar;
 			break;

 		case fsiop_portc:
 			dir = &im->im_ioport.iop_pcdir;
 			dat = &im->im_ioport.iop_pcdat;
 			ppar = &im->im_ioport.iop_pcpar;
 			break;

 		case fsiop_portd:
 			dir = &im->im_ioport.iop_pddir;
 			dat = &im->im_ioport.iop_pddat;
 			ppar = &im->im_ioport.iop_pdpar;
 			break;

 		case fsiop_porte:
 			dir = &im->im_cpm.cp_pedir;
 			dat = &im->im_cpm.cp_pedat;
 			ppar = &im->im_cpm.cp_pepar;
 			break;

 		default:
 			printk(KERN_ERR DRV_MODULE_NAME
 			       "Illegal port value %d!\n", port);
 			return -EINVAL;
 	}

 	adv = bit >> 3;
 	dir = (char *)dir + adv;
 	dat = (char *)dat + adv;
 	ppar = (char *)ppar + adv;

 	msk = 1 << (7 - (bit & 7));
 	if ((in_8(ppar) & msk) != 0) {
 		printk(KERN_ERR DRV_MODULE_NAME
 		       "pin %d on port %d is not general purpose!\n", bit, port);
 		return -EINVAL;
 	}

 	*dirp = dir;
 	*datp = dat;
 	*mskp = msk;

 	return 0;
 }
 #endif

 #ifdef CONFIG_8260
 static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
 {
 	iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport;
 	void *dir, *dat, *ppar;
 	int adv;
 	u8 msk;

 	switch (port) {
 		case fsiop_porta:
 			dir = &io->iop_pdira;
 			dat = &io->iop_pdata;
 			ppar = &io->iop_ppara;
 			break;

 		case fsiop_portb:
 			dir = &io->iop_pdirb;
 			dat = &io->iop_pdatb;
 			ppar = &io->iop_pparb;
 			break;

 		case fsiop_portc:
 			dir = &io->iop_pdirc;
 			dat = &io->iop_pdatc;
 			ppar = &io->iop_pparc;
 			break;

 		case fsiop_portd:
 			dir = &io->iop_pdird;
 			dat = &io->iop_pdatd;
 			ppar = &io->iop_ppard;
 			break;

 		default:
 			printk(KERN_ERR DRV_MODULE_NAME
 			       "Illegal port value %d!\n", port);
 			return -EINVAL;
 	}

 	adv = bit >> 3;
 	dir = (char *)dir + adv;
 	dat = (char *)dat + adv;
 	ppar = (char *)ppar + adv;

 	msk = 1 << (7 - (bit & 7));
 	if ((in_8(ppar) & msk) != 0) {
 		printk(KERN_ERR DRV_MODULE_NAME
 		       "pin %d on port %d is not general purpose!\n", bit, port);
 		return -EINVAL;
 	}

 	*dirp = dir;
 	*datp = dat;
 	*mskp = msk;

 	return 0;
 }
 #endif

 static inline void bb_set(u8 *p, u8 m)
 {
 	out_8(p, in_8(p) | m);
 }

 static inline void bb_clr(u8 *p, u8 m)
 {
 	out_8(p, in_8(p) & ~m);
 }

 static inline int bb_read(u8 *p, u8 m)
 {
 	return (in_8(p) & m) != 0;
 }

 static inline void mdio_active(struct fs_enet_mii_bus *bus)
 {
 	bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
 }

 static inline void mdio_tristate(struct fs_enet_mii_bus *bus)
 {
 	bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
 }

 static inline int mdio_read(struct fs_enet_mii_bus *bus)
 {
 	return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
 }

 static inline void mdio(struct fs_enet_mii_bus *bus, int what)
 {
 	if (what)
 		bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
 	else
 		bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
 }

 static inline void mdc(struct fs_enet_mii_bus *bus, int what)
 {
 	if (what)
 		bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
 	else
 		bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
 }

 static inline void mii_delay(struct fs_enet_mii_bus *bus)
 {
 	udelay(bus->bus_info->i.bitbang.delay);
 }

 /* Utility to send the preamble, address, and register (common to read and write). */
 static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg)
 {
 	int j;

 	/*
 	 * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
 	 * The IEEE spec says this is a PHY optional requirement.  The AMD
 	 * 79C874 requires one after power up and one after a MII communications
 	 * error.  This means that we are doing more preambles than we need,
 	 * but it is safer and will be much more robust.
 	 */

 	mdio_active(bus);
 	mdio(bus, 1);
 	for (j = 0; j < 32; j++) {
 		mdc(bus, 0);
 		mii_delay(bus);
 		mdc(bus, 1);
 		mii_delay(bus);
 	}

 	/* send the start bit (01) and the read opcode (10) or write (10) */
 	mdc(bus, 0);
 	mdio(bus, 0);
 	mii_delay(bus);
 	mdc(bus, 1);
 	mii_delay(bus);
 	mdc(bus, 0);
 	mdio(bus, 1);
 	mii_delay(bus);
 	mdc(bus, 1);
 	mii_delay(bus);
 	mdc(bus, 0);
 	mdio(bus, read);
 	mii_delay(bus);
 	mdc(bus, 1);
 	mii_delay(bus);
 	mdc(bus, 0);
 	mdio(bus, !read);
 	mii_delay(bus);
 	mdc(bus, 1);
 	mii_delay(bus);

 	/* send the PHY address */
 	for (j = 0; j < 5; j++) {
 		mdc(bus, 0);
 		mdio(bus, (addr & 0x10) != 0);
 		mii_delay(bus);
 		mdc(bus, 1);
 		mii_delay(bus);
 		addr <<= 1;
 	}

 	/* send the register address */
 	for (j = 0; j < 5; j++) {
 		mdc(bus, 0);
 		mdio(bus, (reg & 0x10) != 0);
 		mii_delay(bus);
 		mdc(bus, 1);
 		mii_delay(bus);
 		reg <<= 1;
 	}
 }

 static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
 {
 	u16 rdreg;
 	int ret, j;
 	u8 addr = phy_id & 0xff;
 	u8 reg = location & 0xff;

 	bitbang_pre(bus, 1, addr, reg);

 	/* tri-state our MDIO I/O pin so we can read */
 	mdc(bus, 0);
 	mdio_tristate(bus);
 	mii_delay(bus);
 	mdc(bus, 1);
 	mii_delay(bus);

 	/* check the turnaround bit: the PHY should be driving it to zero */
 	if (mdio_read(bus) != 0) {
 		/* PHY didn't drive TA low */
 		for (j = 0; j < 32; j++) {
 			mdc(bus, 0);
 			mii_delay(bus);
 			mdc(bus, 1);
 			mii_delay(bus);
 		}
 		ret = -1;
 		goto out;
 	}

 	mdc(bus, 0);
 	mii_delay(bus);

 	/* read 16 bits of register data, MSB first */
 	rdreg = 0;
 	for (j = 0; j < 16; j++) {
 		mdc(bus, 1);
 		mii_delay(bus);
 		rdreg <<= 1;
 		rdreg |= mdio_read(bus);
 		mdc(bus, 0);
 		mii_delay(bus);
 	}

 	mdc(bus, 1);
 	mii_delay(bus);
 	mdc(bus, 0);
 	mii_delay(bus);
 	mdc(bus, 1);
 	mii_delay(bus);

 	ret = rdreg;
 out:
 	return ret;
 }

 static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
 {
 	int j;
 	u8 addr = phy_id & 0xff;
 	u8 reg = location & 0xff;
 	u16 value = val & 0xffff;

 	bitbang_pre(bus, 0, addr, reg);

 	/* send the turnaround (10) */
 	mdc(bus, 0);
 	mdio(bus, 1);
 	mii_delay(bus);
 	mdc(bus, 1);
 	mii_delay(bus);
 	mdc(bus, 0);
 	mdio(bus, 0);
 	mii_delay(bus);
 	mdc(bus, 1);
 	mii_delay(bus);

 	/* write 16 bits of register data, MSB first */
 	for (j = 0; j < 16; j++) {
 		mdc(bus, 0);
 		mdio(bus, (value & 0x8000) != 0);
 		mii_delay(bus);
 		mdc(bus, 1);
 		mii_delay(bus);
 		value <<= 1;
 	}

 	/*
 	 * Tri-state the MDIO line.
 	 */
 	mdio_tristate(bus);
 	mdc(bus, 0);
 	mii_delay(bus);
 	mdc(bus, 1);
 	mii_delay(bus);
 }

 int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus)
 {
 	const struct fs_mii_bus_info *bi = bus->bus_info;
 	int r;

 	r = bitbang_prep_bit(&bus->bitbang.mdio_dir,
 			 &bus->bitbang.mdio_dat,
 			 &bus->bitbang.mdio_msk,
 			 bi->i.bitbang.mdio_port,
 			 bi->i.bitbang.mdio_bit);
 	if (r != 0)
 		return r;

 	r = bitbang_prep_bit(&bus->bitbang.mdc_dir,
 			 &bus->bitbang.mdc_dat,
 			 &bus->bitbang.mdc_msk,
 			 bi->i.bitbang.mdc_port,
 			 bi->i.bitbang.mdc_bit);
 	if (r != 0)
 		return r;

 	bus->mii_read = mii_read;
 	bus->mii_write = mii_write;

 	return 0;
 }
	/*
	* Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
	*
	* Copyright (c) 2003 Intracom S.A.
	* by Pantelis Antoniou <panto@intracom.gr>
	*
	* 2005 (c) MontaVista Software, Inc.
	* Vitaly Bordug <vbordug@ru.mvista.com>
	*
	* This file is licensed under the terms of the GNU General Public License
	* version 2. This program is licensed "as is" without any warranty of any
	* kind, whether express or implied.
	*/


	#include <linux/config.h>
	#include <linux/module.h>
	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/sched.h>
	#include <linux/string.h>
	#include <linux/ptrace.h>
	#include <linux/errno.h>
	#include <linux/ioport.h>
	#include <linux/slab.h>
	#include <linux/interrupt.h>
	#include <linux/pci.h>
	#include <linux/init.h>
	#include <linux/delay.h>
	#include <linux/netdevice.h>
	#include <linux/etherdevice.h>
	#include <linux/skbuff.h>
	#include <linux/spinlock.h>
	#include <linux/mii.h>
	#include <linux/ethtool.h>
	#include <linux/bitops.h>

	#include <asm/pgtable.h>
	#include <asm/irq.h>
	#include <asm/uaccess.h>

	#include "fs_enet.h"

	#ifdef CONFIG_8xx
	static int bitbang_prep_bit(u8 dirp, u8 datp, u8 *mskp, int port, int bit)
	{
	immap_t im = (immap_t )fs_enet_immap;
	void dir, dat, *ppar;
	int adv;
	u8 msk;

	switch (port) {
	case fsiop_porta:
	dir = &im->im_ioport.iop_padir;
	dat = &im->im_ioport.iop_padat;
	ppar = &im->im_ioport.iop_papar;
	break;

	case fsiop_portb:
	dir = &im->im_cpm.cp_pbdir;
	dat = &im->im_cpm.cp_pbdat;
	ppar = &im->im_cpm.cp_pbpar;
	break;

	case fsiop_portc:
	dir = &im->im_ioport.iop_pcdir;
	dat = &im->im_ioport.iop_pcdat;
	ppar = &im->im_ioport.iop_pcpar;
	break;

	case fsiop_portd:
	dir = &im->im_ioport.iop_pddir;
	dat = &im->im_ioport.iop_pddat;
	ppar = &im->im_ioport.iop_pdpar;
	break;

	case fsiop_porte:
	dir = &im->im_cpm.cp_pedir;
	dat = &im->im_cpm.cp_pedat;
	ppar = &im->im_cpm.cp_pepar;
	break;

	default:
	printk(KERN_ERR DRV_MODULE_NAME
	"Illegal port value %d!\n", port);
	return -EINVAL;
	}

	adv = bit >> 3;
	dir = (char *)dir + adv;
	dat = (char *)dat + adv;
	ppar = (char *)ppar + adv;

	msk = 1 << (7 - (bit & 7));
	if ((in_8(ppar) & msk) != 0) {
	printk(KERN_ERR DRV_MODULE_NAME
	"pin %d on port %d is not general purpose!\n", bit, port);
	return -EINVAL;
	}

	*dirp = dir;
	*datp = dat;
	*mskp = msk;

	return 0;
	}
	#endif

	#ifdef CONFIG_8260
	static int bitbang_prep_bit(u8 dirp, u8 datp, u8 *mskp, int port, int bit)
	{
	iop_cpm2_t io = &((cpm2_map_t )fs_enet_immap)->im_ioport;
	void dir, dat, *ppar;
	int adv;
	u8 msk;

	switch (port) {
	case fsiop_porta:
	dir = &io->iop_pdira;
	dat = &io->iop_pdata;
	ppar = &io->iop_ppara;
	break;

	case fsiop_portb:
	dir = &io->iop_pdirb;
	dat = &io->iop_pdatb;
	ppar = &io->iop_pparb;
	break;

	case fsiop_portc:
	dir = &io->iop_pdirc;
	dat = &io->iop_pdatc;
	ppar = &io->iop_pparc;
	break;

	case fsiop_portd:
	dir = &io->iop_pdird;
	dat = &io->iop_pdatd;
	ppar = &io->iop_ppard;
	break;

	default:
	printk(KERN_ERR DRV_MODULE_NAME
	"Illegal port value %d!\n", port);
	return -EINVAL;
	}

	adv = bit >> 3;
	dir = (char *)dir + adv;
	dat = (char *)dat + adv;
	ppar = (char *)ppar + adv;

	msk = 1 << (7 - (bit & 7));
	if ((in_8(ppar) & msk) != 0) {
	printk(KERN_ERR DRV_MODULE_NAME
	"pin %d on port %d is not general purpose!\n", bit, port);
	return -EINVAL;
	}

	*dirp = dir;
	*datp = dat;
	*mskp = msk;

	return 0;
	}
	#endif

	static inline void bb_set(u8 *p, u8 m)
	{
	out_8(p, in_8(p) \| m);
	}

	static inline void bb_clr(u8 *p, u8 m)
	{
	out_8(p, in_8(p) & ~m);
	}

	static inline int bb_read(u8 *p, u8 m)
	{
	return (in_8(p) & m) != 0;
	}

	static inline void mdio_active(struct fs_enet_mii_bus *bus)
	{
	bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
	}

	static inline void mdio_tristate(struct fs_enet_mii_bus *bus)
	{
	bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
	}

	static inline int mdio_read(struct fs_enet_mii_bus *bus)
	{
	return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
	}

	static inline void mdio(struct fs_enet_mii_bus *bus, int what)
	{
	if (what)
	bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
	else
	bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
	}

	static inline void mdc(struct fs_enet_mii_bus *bus, int what)
	{
	if (what)
	bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
	else
	bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
	}

	static inline void mii_delay(struct fs_enet_mii_bus *bus)
	{
	udelay(bus->bus_info->i.bitbang.delay);
	}

	/* Utility to send the preamble, address, and register (common to read and write). */
	static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg)
	{
	int j;

	/*
	* Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
	* The IEEE spec says this is a PHY optional requirement. The AMD
	* 79C874 requires one after power up and one after a MII communications
	* error. This means that we are doing more preambles than we need,
	* but it is safer and will be much more robust.
	*/

	mdio_active(bus);
	mdio(bus, 1);
	for (j = 0; j < 32; j++) {
	mdc(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	}

	/* send the start bit (01) and the read opcode (10) or write (10) */
	mdc(bus, 0);
	mdio(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mdio(bus, 1);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mdio(bus, read);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mdio(bus, !read);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);

	/* send the PHY address */
	for (j = 0; j < 5; j++) {
	mdc(bus, 0);
	mdio(bus, (addr & 0x10) != 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	addr <<= 1;
	}

	/* send the register address */
	for (j = 0; j < 5; j++) {
	mdc(bus, 0);
	mdio(bus, (reg & 0x10) != 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	reg <<= 1;
	}
	}

	static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
	{
	u16 rdreg;
	int ret, j;
	u8 addr = phy_id & 0xff;
	u8 reg = location & 0xff;

	bitbang_pre(bus, 1, addr, reg);

	/* tri-state our MDIO I/O pin so we can read */
	mdc(bus, 0);
	mdio_tristate(bus);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);

	/* check the turnaround bit: the PHY should be driving it to zero */
	if (mdio_read(bus) != 0) {
	/* PHY didn't drive TA low */
	for (j = 0; j < 32; j++) {
	mdc(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	}
	ret = -1;
	goto out;
	}

	mdc(bus, 0);
	mii_delay(bus);

	/* read 16 bits of register data, MSB first */
	rdreg = 0;
	for (j = 0; j < 16; j++) {
	mdc(bus, 1);
	mii_delay(bus);
	rdreg <<= 1;
	rdreg \|= mdio_read(bus);
	mdc(bus, 0);
	mii_delay(bus);
	}

	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);

	ret = rdreg;
	out:
	return ret;
	}

	static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
	{
	int j;
	u8 addr = phy_id & 0xff;
	u8 reg = location & 0xff;
	u16 value = val & 0xffff;

	bitbang_pre(bus, 0, addr, reg);

	/* send the turnaround (10) */
	mdc(bus, 0);
	mdio(bus, 1);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mdio(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);

	/* write 16 bits of register data, MSB first */
	for (j = 0; j < 16; j++) {
	mdc(bus, 0);
	mdio(bus, (value & 0x8000) != 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	value <<= 1;
	}

	/*
	* Tri-state the MDIO line.
	*/
	mdio_tristate(bus);
	mdc(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	}

	int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus)
	{
	const struct fs_mii_bus_info *bi = bus->bus_info;
	int r;

	r = bitbang_prep_bit(&bus->bitbang.mdio_dir,
	&bus->bitbang.mdio_dat,
	&bus->bitbang.mdio_msk,
	bi->i.bitbang.mdio_port,
	bi->i.bitbang.mdio_bit);
	if (r != 0)
	return r;

	r = bitbang_prep_bit(&bus->bitbang.mdc_dir,
	&bus->bitbang.mdc_dat,
	&bus->bitbang.mdc_msk,
	bi->i.bitbang.mdc_port,
	bi->i.bitbang.mdc_bit);
	if (r != 0)
	return r;

	bus->mii_read = mii_read;
	bus->mii_write = mii_write;

	return 0;
	}