sh: Get the mach-cayman IRQ support building.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 81d37e9..cc1836e 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -4,5 +4,6 @@
obj-y += intc.o
obj-$(CONFIG_SUPERH32) += imask.o
+obj-$(CONFIG_CPU_SH5) += intc-sh5.o
obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o
obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
new file mode 100644
index 0000000..49b845a
--- /dev/null
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -0,0 +1,257 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/irq_intc.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * Interrupt Controller support for SH5 INTC.
+ * Per-interrupt selective. IRLM=0 (Fixed priority) is not
+ * supported being useless without a cascaded interrupt
+ * controller.
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <asm/cpu/irq.h>
+#include <asm/page.h>
+
+/*
+ * Maybe the generic Peripheral block could move to a more
+ * generic include file. INTC Block will be defined here
+ * and only here to make INTC self-contained in a single
+ * file.
+ */
+#define INTC_BLOCK_OFFSET 0x01000000
+
+/* Base */
+#define INTC_BASE PHYS_PERIPHERAL_BLOCK + \
+ INTC_BLOCK_OFFSET
+
+/* Address */
+#define INTC_ICR_SET (intc_virt + 0x0)
+#define INTC_ICR_CLEAR (intc_virt + 0x8)
+#define INTC_INTPRI_0 (intc_virt + 0x10)
+#define INTC_INTSRC_0 (intc_virt + 0x50)
+#define INTC_INTSRC_1 (intc_virt + 0x58)
+#define INTC_INTREQ_0 (intc_virt + 0x60)
+#define INTC_INTREQ_1 (intc_virt + 0x68)
+#define INTC_INTENB_0 (intc_virt + 0x70)
+#define INTC_INTENB_1 (intc_virt + 0x78)
+#define INTC_INTDSB_0 (intc_virt + 0x80)
+#define INTC_INTDSB_1 (intc_virt + 0x88)
+
+#define INTC_ICR_IRLM 0x1
+#define INTC_INTPRI_PREGS 8 /* 8 Priority Registers */
+#define INTC_INTPRI_PPREG 8 /* 8 Priorities per Register */
+
+
+/*
+ * Mapper between the vector ordinal and the IRQ number
+ * passed to kernel/device drivers.
+ */
+int intc_evt_to_irq[(0xE20/0x20)+1] = {
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */
+ 0, 0, 0, 0, 0, 1, 0, 0, /* 0x200 - 0x2E0 */
+ 2, 0, 0, 3, 0, 0, 0, -1, /* 0x300 - 0x3E0 */
+ 32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */
+ -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */
+ -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */
+ 39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */
+ 4, 5, 6, 7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */
+ 12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */
+ -1, -1 /* 0xE00 - 0xE20 */
+};
+
+/*
+ * Opposite mapper.
+ */
+static int IRQ_to_vectorN[NR_INTC_IRQS] = {
+ 0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /* 0- 7 */
+ -1, -1, -1, -1, 0x50, 0x51, 0x52, 0x53, /* 8-15 */
+ 0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36, -1, /* 16-23 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 24-31 */
+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */
+ 0x39, 0x3A, 0x3B, -1, -1, -1, -1, -1, /* 40-47 */
+ -1, -1, -1, -1, -1, -1, -1, -1, /* 48-55 */
+ -1, -1, -1, -1, -1, -1, -1, 0x2B, /* 56-63 */
+
+};
+
+static unsigned long intc_virt;
+
+static unsigned int startup_intc_irq(unsigned int irq);
+static void shutdown_intc_irq(unsigned int irq);
+static void enable_intc_irq(unsigned int irq);
+static void disable_intc_irq(unsigned int irq);
+static void mask_and_ack_intc(unsigned int);
+static void end_intc_irq(unsigned int irq);
+
+static struct hw_interrupt_type intc_irq_type = {
+ .typename = "INTC",
+ .startup = startup_intc_irq,
+ .shutdown = shutdown_intc_irq,
+ .enable = enable_intc_irq,
+ .disable = disable_intc_irq,
+ .ack = mask_and_ack_intc,
+ .end = end_intc_irq
+};
+
+static int irlm; /* IRL mode */
+
+static unsigned int startup_intc_irq(unsigned int irq)
+{
+ enable_intc_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static void shutdown_intc_irq(unsigned int irq)
+{
+ disable_intc_irq(irq);
+}
+
+static void enable_intc_irq(unsigned int irq)
+{
+ unsigned long reg;
+ unsigned long bitmask;
+
+ if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY))
+ printk("Trying to use straight IRL0-3 with an encoding platform.\n");
+
+ if (irq < 32) {
+ reg = INTC_INTENB_0;
+ bitmask = 1 << irq;
+ } else {
+ reg = INTC_INTENB_1;
+ bitmask = 1 << (irq - 32);
+ }
+
+ ctrl_outl(bitmask, reg);
+}
+
+static void disable_intc_irq(unsigned int irq)
+{
+ unsigned long reg;
+ unsigned long bitmask;
+
+ if (irq < 32) {
+ reg = INTC_INTDSB_0;
+ bitmask = 1 << irq;
+ } else {
+ reg = INTC_INTDSB_1;
+ bitmask = 1 << (irq - 32);
+ }
+
+ ctrl_outl(bitmask, reg);
+}
+
+static void mask_and_ack_intc(unsigned int irq)
+{
+ disable_intc_irq(irq);
+}
+
+static void end_intc_irq(unsigned int irq)
+{
+ enable_intc_irq(irq);
+}
+
+/* For future use, if we ever support IRLM=0) */
+void make_intc_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ irq_desc[irq].chip = &intc_irq_type;
+ disable_intc_irq(irq);
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int intc_irq_describe(char* p, int irq)
+{
+ if (irq < NR_INTC_IRQS)
+ return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20);
+ else
+ return 0;
+}
+#endif
+
+void __init plat_irq_setup(void)
+{
+ unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
+ unsigned long reg;
+ unsigned long data;
+ int i;
+
+ intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
+ if (!intc_virt) {
+ panic("Unable to remap INTC\n");
+ }
+
+
+ /* Set default: per-line enable/disable, priority driven ack/eoi */
+ for (i = 0; i < NR_INTC_IRQS; i++) {
+ if (platform_int_priority[i] != NO_PRIORITY) {
+ irq_desc[i].chip = &intc_irq_type;
+ }
+ }
+
+
+ /* Disable all interrupts and set all priorities to 0 to avoid trouble */
+ ctrl_outl(-1, INTC_INTDSB_0);
+ ctrl_outl(-1, INTC_INTDSB_1);
+
+ for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8)
+ ctrl_outl( NO_PRIORITY, reg);
+
+
+ /* Set IRLM */
+ /* If all the priorities are set to 'no priority', then
+ * assume we are using encoded mode.
+ */
+ irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \
+ platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3];
+
+ if (irlm == NO_PRIORITY) {
+ /* IRLM = 0 */
+ reg = INTC_ICR_CLEAR;
+ i = IRQ_INTA;
+ printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
+ } else {
+ /* IRLM = 1 */
+ reg = INTC_ICR_SET;
+ i = IRQ_IRL0;
+ }
+ ctrl_outl(INTC_ICR_IRLM, reg);
+
+ /* Set interrupt priorities according to platform description */
+ for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
+ data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4);
+ if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
+ /* Upon the 7th, set Priority Register */
+ ctrl_outl(data, reg);
+ data = 0;
+ reg += 8;
+ }
+ }
+
+ /*
+ * And now let interrupts come in.
+ * sti() is not enough, we need to
+ * lower priority, too.
+ */
+ __asm__ __volatile__("getcon " __SR ", %0\n\t"
+ "and %0, %1, %0\n\t"
+ "putcon %0, " __SR "\n\t"
+ : "=&r" (__dummy0)
+ : "r" (__dummy1));
+}
diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile
index 0ef257b..8646363 100644
--- a/arch/sh/kernel/cpu/sh5/Makefile
+++ b/arch/sh/kernel/cpu/sh5/Makefile
@@ -5,7 +5,3 @@
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_KALLSYMS) += unwind.o
-
-# CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH5_101) += setup-sh5-101.o
-obj-$(CONFIG_CPU_SUBTYPE_SH5_103) += setup-sh5-101.o
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5-101.c b/arch/sh/kernel/cpu/sh5/setup-sh5-101.c
deleted file mode 100644
index 3680012..0000000
--- a/arch/sh/kernel/cpu/sh5/setup-sh5-101.c
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * SH5-101 Setup
- *
- * Copyright (C) 2007 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-
-void __init plat_irq_setup(void)
-{
- /* do nothing - all IRL interrupts are handled by the board code */
-}
diff --git a/arch/sh/mach-cayman/Makefile b/arch/sh/mach-cayman/Makefile
index 67a2258..489a8f8 100644
--- a/arch/sh/mach-cayman/Makefile
+++ b/arch/sh/mach-cayman/Makefile
@@ -1,11 +1,5 @@
#
# Makefile for the Hitachi Cayman specific parts of the kernel
#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-obj-y := setup.o irq.o iomap.o
+obj-y := setup.o irq.o
obj-$(CONFIG_HEARTBEAT) += led.o
-
diff --git a/arch/sh/mach-cayman/iomap.c b/arch/sh/mach-cayman/iomap.c
deleted file mode 100644
index a5c645f..0000000
--- a/arch/sh/mach-cayman/iomap.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/sh64/mach-cayman/iomap.c
- *
- * Cayman iomap interface
- *
- * Copyright (C) 2004 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/io.h>
-#include <asm/cayman.h>
-
-void __iomem *ioport_map(unsigned long port, unsigned int len)
-{
- if (port < 0x400)
- return (void __iomem *)((port << 2) | smsc_superio_virt);
-
- return (void __iomem *)port;
-}
-
diff --git a/arch/sh/mach-cayman/irq.c b/arch/sh/mach-cayman/irq.c
index aaad36d..30ec7be 100644
--- a/arch/sh/mach-cayman/irq.c
+++ b/arch/sh/mach-cayman/irq.c
@@ -1,24 +1,26 @@
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/kernel/irq_cayman.c
- *
- * SH-5 Cayman Interrupt Support
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
*
* This file handles the board specific parts of the Cayman interrupt system
*
* Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/signal.h>
-#include <asm/cayman.h>
+#include <asm/cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ IRQ_IRL3
unsigned long epld_virt;
diff --git a/arch/sh/mach-cayman/setup.c b/arch/sh/mach-cayman/setup.c
index 726c520..8c9fa47 100644
--- a/arch/sh/mach-cayman/setup.c
+++ b/arch/sh/mach-cayman/setup.c
@@ -1,28 +1,19 @@
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/mach-cayman/setup.c
+ * arch/sh/mach-cayman/setup.c
*
* SH5 Cayman support
*
- * This file handles the architecture-dependent parts of initialization
+ * Copyright (C) 2002 David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007 Paul Mundt
*
- * Copyright David J. Mckay.
- * Needs major work!
- *
- * benedict.gaster@superh.com: 3rd May 2002
- * Added support for ramdisk, removing statically linked romfs at the same time.
- *
- * lethal@linux-sh.org: 15th May 2003
- * Use the generic procfs cpuinfo interface, just return a valid board name.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/kernel.h>
-#include <asm/platform.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <asm/cpu/irq.h>
/*
* Platform Dependent Interrupt Priorities.
@@ -96,42 +87,6 @@
unsigned long smsc_superio_virt;
-/*
- * Platform dependent structures: maps and parms block.
- */
-struct resource io_resources[] = {
- /* To be updated with external devices */
-};
-
-struct resource kram_resources[] = {
- /* These must be last in the array */
- { .name = "Kernel code", .start = 0, .end = 0 },
- /* These must be last in the array */
- { .name = "Kernel data", .start = 0, .end = 0 }
-};
-
-struct resource xram_resources[] = {
- /* To be updated with external devices */
-};
-
-struct resource rom_resources[] = {
- /* To be updated with external devices */
-};
-
-struct sh64_platform platform_parms = {
- .readonly_rootfs = 1,
- .initial_root_dev = 0x0100,
- .loader_type = 1,
- .io_res_p = io_resources,
- .io_res_count = ARRAY_SIZE(io_resources),
- .kram_res_p = kram_resources,
- .kram_res_count = ARRAY_SIZE(kram_resources),
- .xram_res_p = xram_resources,
- .xram_res_count = ARRAY_SIZE(xram_resources),
- .rom_res_p = rom_resources,
- .rom_res_count = ARRAY_SIZE(rom_resources),
-};
-
int platform_int_priority[NR_INTC_IRQS] = {
IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
@@ -210,30 +165,23 @@
return 0;
}
-
-/* This is grotty, but, because kernel is always referenced on the link line
- * before any devices, this is safe.
- */
__initcall(smsc_superio_setup);
-void __init platform_setup(void)
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
{
- /* Cayman platform leaves the decision to head.S, for now */
- platform_parms.fpu_flags = fpu_in_use;
+ if (port < 0x400) {
+ extern unsigned long smsc_superio_virt;
+ return (void __iomem *)((port << 2) | smsc_superio_virt);
+ }
+
+ return (void __iomem *)port;
}
-void __init platform_monitor(void)
-{
- /* Nothing yet .. */
-}
+extern void init_cayman_irq(void);
-void __init platform_reserve(void)
-{
- /* Nothing yet .. */
-}
-
-const char *get_system_type(void)
-{
- return "Hitachi Cayman";
-}
-
+static struct sh_machine_vector mv_cayman __initmv = {
+ .mv_name = "Hitachi Cayman",
+ .mv_nr_irqs = 64,
+ .mv_ioport_map = cayman_ioport_map,
+ .mv_init_irq = init_cayman_irq,
+};