|  | /* | 
|  | * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T] | 
|  | * | 
|  | * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org> | 
|  | * | 
|  | * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ | 
|  | * 	by Dany Salman <salmandany@yahoo.fr> | 
|  | *	Copyright (c) 2004 TDF | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/i2c-algo-bit.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/dma-mapping.h> | 
|  |  | 
|  | #include "demux.h" | 
|  | #include "dmxdev.h" | 
|  | #include "dvb_demux.h" | 
|  | #include "dvb_frontend.h" | 
|  | #include "dvb_net.h" | 
|  | #include "dvbdev.h" | 
|  | #include "tda1004x.h" | 
|  |  | 
|  | #define DRIVER_NAME		"pluto2" | 
|  |  | 
|  | #define REG_PIDn(n)		((n) << 2)	/* PID n pattern registers */ | 
|  | #define REG_PCAR		0x0020		/* PC address register */ | 
|  | #define REG_TSCR		0x0024		/* TS ctrl & status */ | 
|  | #define REG_MISC		0x0028		/* miscellaneous */ | 
|  | #define REG_MMAC		0x002c		/* MSB MAC address */ | 
|  | #define REG_IMAC		0x0030		/* ISB MAC address */ | 
|  | #define REG_LMAC		0x0034		/* LSB MAC address */ | 
|  | #define REG_SPID		0x0038		/* SPI data */ | 
|  | #define REG_SLCS		0x003c		/* serial links ctrl/status */ | 
|  |  | 
|  | #define PID0_NOFIL		(0x0001 << 16) | 
|  | #define PIDn_ENP		(0x0001 << 15) | 
|  | #define PID0_END		(0x0001 << 14) | 
|  | #define PID0_AFIL		(0x0001 << 13) | 
|  | #define PIDn_PID		(0x1fff <<  0) | 
|  |  | 
|  | #define TSCR_NBPACKETS		(0x00ff << 24) | 
|  | #define TSCR_DEM		(0x0001 << 17) | 
|  | #define TSCR_DE			(0x0001 << 16) | 
|  | #define TSCR_RSTN		(0x0001 << 15) | 
|  | #define TSCR_MSKO		(0x0001 << 14) | 
|  | #define TSCR_MSKA		(0x0001 << 13) | 
|  | #define TSCR_MSKL		(0x0001 << 12) | 
|  | #define TSCR_OVR		(0x0001 << 11) | 
|  | #define TSCR_AFUL		(0x0001 << 10) | 
|  | #define TSCR_LOCK		(0x0001 <<  9) | 
|  | #define TSCR_IACK		(0x0001 <<  8) | 
|  | #define TSCR_ADEF		(0x007f <<  0) | 
|  |  | 
|  | #define MISC_DVR		(0x0fff <<  4) | 
|  | #define MISC_ALED		(0x0001 <<  3) | 
|  | #define MISC_FRST		(0x0001 <<  2) | 
|  | #define MISC_LED1		(0x0001 <<  1) | 
|  | #define MISC_LED0		(0x0001 <<  0) | 
|  |  | 
|  | #define SPID_SPIDR		(0x00ff <<  0) | 
|  |  | 
|  | #define SLCS_SCL		(0x0001 <<  7) | 
|  | #define SLCS_SDA		(0x0001 <<  6) | 
|  | #define SLCS_CSN		(0x0001 <<  2) | 
|  | #define SLCS_OVR		(0x0001 <<  1) | 
|  | #define SLCS_SWC		(0x0001 <<  0) | 
|  |  | 
|  | #define TS_DMA_PACKETS		(8) | 
|  | #define TS_DMA_BYTES		(188 * TS_DMA_PACKETS) | 
|  |  | 
|  | #define I2C_ADDR_TDA10046	0x10 | 
|  | #define I2C_ADDR_TUA6034	0xc2 | 
|  | #define NHWFILTERS		8 | 
|  |  | 
|  | struct pluto { | 
|  | /* pci */ | 
|  | struct pci_dev *pdev; | 
|  | u8 __iomem *io_mem; | 
|  |  | 
|  | /* dvb */ | 
|  | struct dmx_frontend hw_frontend; | 
|  | struct dmx_frontend mem_frontend; | 
|  | struct dmxdev dmxdev; | 
|  | struct dvb_adapter dvb_adapter; | 
|  | struct dvb_demux demux; | 
|  | struct dvb_frontend *fe; | 
|  | struct dvb_net dvbnet; | 
|  | unsigned int full_ts_users; | 
|  | unsigned int users; | 
|  |  | 
|  | /* i2c */ | 
|  | struct i2c_algo_bit_data i2c_bit; | 
|  | struct i2c_adapter i2c_adap; | 
|  | unsigned int i2cbug; | 
|  |  | 
|  | /* irq */ | 
|  | unsigned int overflow; | 
|  |  | 
|  | /* dma */ | 
|  | dma_addr_t dma_addr; | 
|  | u8 dma_buf[TS_DMA_BYTES]; | 
|  | u8 dummy[4096]; | 
|  | }; | 
|  |  | 
|  | static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed) | 
|  | { | 
|  | return container_of(feed->demux, struct pluto, demux); | 
|  | } | 
|  |  | 
|  | static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe) | 
|  | { | 
|  | return container_of(fe->dvb, struct pluto, dvb_adapter); | 
|  | } | 
|  |  | 
|  | static inline u32 pluto_readreg(struct pluto *pluto, u32 reg) | 
|  | { | 
|  | return readl(&pluto->io_mem[reg]); | 
|  | } | 
|  |  | 
|  | static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val) | 
|  | { | 
|  | writel(val, &pluto->io_mem[reg]); | 
|  | } | 
|  |  | 
|  | static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits) | 
|  | { | 
|  | u32 val = readl(&pluto->io_mem[reg]); | 
|  | val &= ~mask; | 
|  | val |= bits; | 
|  | writel(val, &pluto->io_mem[reg]); | 
|  | } | 
|  |  | 
|  | static void pluto_setsda(void *data, int state) | 
|  | { | 
|  | struct pluto *pluto = data; | 
|  |  | 
|  | if (state) | 
|  | pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA); | 
|  | else | 
|  | pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0); | 
|  | } | 
|  |  | 
|  | static void pluto_setscl(void *data, int state) | 
|  | { | 
|  | struct pluto *pluto = data; | 
|  |  | 
|  | if (state) | 
|  | pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL); | 
|  | else | 
|  | pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0); | 
|  |  | 
|  | /* try to detect i2c_inb() to workaround hardware bug: | 
|  | * reset SDA to high after SCL has been set to low */ | 
|  | if ((state) && (pluto->i2cbug == 0)) { | 
|  | pluto->i2cbug = 1; | 
|  | } else { | 
|  | if ((!state) && (pluto->i2cbug == 1)) | 
|  | pluto_setsda(pluto, 1); | 
|  | pluto->i2cbug = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int pluto_getsda(void *data) | 
|  | { | 
|  | struct pluto *pluto = data; | 
|  |  | 
|  | return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA; | 
|  | } | 
|  |  | 
|  | static int pluto_getscl(void *data) | 
|  | { | 
|  | struct pluto *pluto = data; | 
|  |  | 
|  | return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL; | 
|  | } | 
|  |  | 
|  | static void pluto_reset_frontend(struct pluto *pluto, int reenable) | 
|  | { | 
|  | u32 val = pluto_readreg(pluto, REG_MISC); | 
|  |  | 
|  | if (val & MISC_FRST) { | 
|  | val &= ~MISC_FRST; | 
|  | pluto_writereg(pluto, REG_MISC, val); | 
|  | } | 
|  | if (reenable) { | 
|  | val |= MISC_FRST; | 
|  | pluto_writereg(pluto, REG_MISC, val); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void pluto_reset_ts(struct pluto *pluto, int reenable) | 
|  | { | 
|  | u32 val = pluto_readreg(pluto, REG_TSCR); | 
|  |  | 
|  | if (val & TSCR_RSTN) { | 
|  | val &= ~TSCR_RSTN; | 
|  | pluto_writereg(pluto, REG_TSCR, val); | 
|  | } | 
|  | if (reenable) { | 
|  | val |= TSCR_RSTN; | 
|  | pluto_writereg(pluto, REG_TSCR, val); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void pluto_set_dma_addr(struct pluto *pluto) | 
|  | { | 
|  | pluto_writereg(pluto, REG_PCAR, cpu_to_le32(pluto->dma_addr)); | 
|  | } | 
|  |  | 
|  | static int __devinit pluto_dma_map(struct pluto *pluto) | 
|  | { | 
|  | pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf, | 
|  | TS_DMA_BYTES, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | return pci_dma_mapping_error(pluto->dma_addr); | 
|  | } | 
|  |  | 
|  | static void pluto_dma_unmap(struct pluto *pluto) | 
|  | { | 
|  | pci_unmap_single(pluto->pdev, pluto->dma_addr, | 
|  | TS_DMA_BYTES, PCI_DMA_FROMDEVICE); | 
|  | } | 
|  |  | 
|  | static int pluto_start_feed(struct dvb_demux_feed *f) | 
|  | { | 
|  | struct pluto *pluto = feed_to_pluto(f); | 
|  |  | 
|  | /* enable PID filtering */ | 
|  | if (pluto->users++ == 0) | 
|  | pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0); | 
|  |  | 
|  | if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) | 
|  | pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid); | 
|  | else if (pluto->full_ts_users++ == 0) | 
|  | pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pluto_stop_feed(struct dvb_demux_feed *f) | 
|  | { | 
|  | struct pluto *pluto = feed_to_pluto(f); | 
|  |  | 
|  | /* disable PID filtering */ | 
|  | if (--pluto->users == 0) | 
|  | pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL); | 
|  |  | 
|  | if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) | 
|  | pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff); | 
|  | else if (--pluto->full_ts_users == 0) | 
|  | pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) | 
|  | { | 
|  | /* synchronize the DMA transfer with the CPU | 
|  | * first so that we see updated contents. */ | 
|  | pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr, | 
|  | TS_DMA_BYTES, PCI_DMA_FROMDEVICE); | 
|  |  | 
|  | /* Workaround for broken hardware: | 
|  | * [1] On startup NBPACKETS seems to contain an uninitialized value, | 
|  | *     but no packets have been transfered. | 
|  | * [2] Sometimes (actually very often) NBPACKETS stays at zero | 
|  | *     although one packet has been transfered. | 
|  | */ | 
|  | if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { | 
|  | unsigned int i = 0; | 
|  | while (pluto->dma_buf[i] == 0x47) | 
|  | i += 188; | 
|  | nbpackets = i / 188; | 
|  | } | 
|  |  | 
|  | dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets); | 
|  |  | 
|  | /* clear the dma buffer. this is needed to be able to identify | 
|  | * new valid ts packets above */ | 
|  | memset(pluto->dma_buf, 0, nbpackets * 188); | 
|  |  | 
|  | /* reset the dma address */ | 
|  | pluto_set_dma_addr(pluto); | 
|  |  | 
|  | /* sync the buffer and give it back to the card */ | 
|  | pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr, | 
|  | TS_DMA_BYTES, PCI_DMA_FROMDEVICE); | 
|  | } | 
|  |  | 
|  | static irqreturn_t pluto_irq(int irq, void *dev_id, struct pt_regs *regs) | 
|  | { | 
|  | struct pluto *pluto = dev_id; | 
|  | u32 tscr; | 
|  |  | 
|  | /* check whether an interrupt occured on this device */ | 
|  | tscr = pluto_readreg(pluto, REG_TSCR); | 
|  | if (!(tscr & (TSCR_DE | TSCR_OVR))) | 
|  | return IRQ_NONE; | 
|  |  | 
|  | if (tscr == 0xffffffff) { | 
|  | // FIXME: maybe recover somehow | 
|  | dev_err(&pluto->pdev->dev, "card hung up :(\n"); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* dma end interrupt */ | 
|  | if (tscr & TSCR_DE) { | 
|  | pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24); | 
|  | /* overflow interrupt */ | 
|  | if (tscr & TSCR_OVR) | 
|  | pluto->overflow++; | 
|  | if (pluto->overflow) { | 
|  | dev_err(&pluto->pdev->dev, "overflow irq (%d)\n", | 
|  | pluto->overflow); | 
|  | pluto_reset_ts(pluto, 1); | 
|  | pluto->overflow = 0; | 
|  | } | 
|  | } else if (tscr & TSCR_OVR) { | 
|  | pluto->overflow++; | 
|  | } | 
|  |  | 
|  | /* ACK the interrupt */ | 
|  | pluto_writereg(pluto, REG_TSCR, tscr | TSCR_IACK); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void __devinit pluto_enable_irqs(struct pluto *pluto) | 
|  | { | 
|  | u32 val = pluto_readreg(pluto, REG_TSCR); | 
|  |  | 
|  | /* set the number of packets */ | 
|  | val &= ~TSCR_ADEF; | 
|  | val |= TS_DMA_PACKETS / 2; | 
|  | /* disable AFUL and LOCK interrupts */ | 
|  | val |= (TSCR_MSKA | TSCR_MSKL); | 
|  | /* enable DMA and OVERFLOW interrupts */ | 
|  | val &= ~(TSCR_DEM | TSCR_MSKO); | 
|  | /* clear pending interrupts */ | 
|  | val |= TSCR_IACK; | 
|  |  | 
|  | pluto_writereg(pluto, REG_TSCR, val); | 
|  | } | 
|  |  | 
|  | static void pluto_disable_irqs(struct pluto *pluto) | 
|  | { | 
|  | u32 val = pluto_readreg(pluto, REG_TSCR); | 
|  |  | 
|  | /* disable all interrupts */ | 
|  | val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL); | 
|  | /* clear pending interrupts */ | 
|  | val |= TSCR_IACK; | 
|  |  | 
|  | pluto_writereg(pluto, REG_TSCR, val); | 
|  | } | 
|  |  | 
|  | static int __devinit pluto_hw_init(struct pluto *pluto) | 
|  | { | 
|  | pluto_reset_frontend(pluto, 1); | 
|  |  | 
|  | /* set automatic LED control by FPGA */ | 
|  | pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); | 
|  |  | 
|  | /* set data endianess */ | 
|  | #ifdef __LITTLE_ENDIAN | 
|  | pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); | 
|  | #else | 
|  | pluto_rw(pluto, REG_PIDn(0), PID0_END, 0); | 
|  | #endif | 
|  | /* map DMA and set address */ | 
|  | pluto_dma_map(pluto); | 
|  | pluto_set_dma_addr(pluto); | 
|  |  | 
|  | /* enable interrupts */ | 
|  | pluto_enable_irqs(pluto); | 
|  |  | 
|  | /* reset TS logic */ | 
|  | pluto_reset_ts(pluto, 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pluto_hw_exit(struct pluto *pluto) | 
|  | { | 
|  | /* disable interrupts */ | 
|  | pluto_disable_irqs(pluto); | 
|  |  | 
|  | pluto_reset_ts(pluto, 0); | 
|  |  | 
|  | /* LED: disable automatic control, enable yellow, disable green */ | 
|  | pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1); | 
|  |  | 
|  | /* unmap DMA */ | 
|  | pluto_dma_unmap(pluto); | 
|  |  | 
|  | pluto_reset_frontend(pluto, 0); | 
|  | } | 
|  |  | 
|  | static inline u32 divide(u32 numerator, u32 denominator) | 
|  | { | 
|  | if (denominator == 0) | 
|  | return ~0; | 
|  |  | 
|  | return (numerator + denominator / 2) / denominator; | 
|  | } | 
|  |  | 
|  | /* LG Innotek TDTE-E001P (Infineon TUA6034) */ | 
|  | static int lg_tdtpe001p_pll_set(struct dvb_frontend *fe, | 
|  | struct dvb_frontend_parameters *p) | 
|  | { | 
|  | struct pluto *pluto = frontend_to_pluto(fe); | 
|  | struct i2c_msg msg; | 
|  | int ret; | 
|  | u8 buf[4]; | 
|  | u32 div; | 
|  |  | 
|  | // Fref = 166.667 Hz | 
|  | // Fref * 3 = 500.000 Hz | 
|  | // IF = 36166667 | 
|  | // IF / Fref = 217 | 
|  | //div = divide(p->frequency + 36166667, 166667); | 
|  | div = divide(p->frequency * 3, 500000) + 217; | 
|  | buf[0] = (div >> 8) & 0x7f; | 
|  | buf[1] = (div >> 0) & 0xff; | 
|  |  | 
|  | if (p->frequency < 611000000) | 
|  | buf[2] = 0xb4; | 
|  | else if (p->frequency < 811000000) | 
|  | buf[2] = 0xbc; | 
|  | else | 
|  | buf[2] = 0xf4; | 
|  |  | 
|  | // VHF: 174-230 MHz | 
|  | // center: 350 MHz | 
|  | // UHF: 470-862 MHz | 
|  | if (p->frequency < 350000000) | 
|  | buf[3] = 0x02; | 
|  | else | 
|  | buf[3] = 0x04; | 
|  |  | 
|  | if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) | 
|  | buf[3] |= 0x08; | 
|  |  | 
|  | if (sizeof(buf) == 6) { | 
|  | buf[4] = buf[2]; | 
|  | buf[4] &= ~0x1c; | 
|  | buf[4] |=  0x18; | 
|  |  | 
|  | buf[5] = (0 << 7) | (2 << 4); | 
|  | } | 
|  |  | 
|  | msg.addr = I2C_ADDR_TUA6034 >> 1; | 
|  | msg.flags = 0; | 
|  | msg.buf = buf; | 
|  | msg.len = sizeof(buf); | 
|  |  | 
|  | ret = i2c_transfer(&pluto->i2c_adap, &msg, 1); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | else if (ret == 0) | 
|  | return -EREMOTEIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pluto2_request_firmware(struct dvb_frontend *fe, | 
|  | const struct firmware **fw, char *name) | 
|  | { | 
|  | struct pluto *pluto = frontend_to_pluto(fe); | 
|  |  | 
|  | return request_firmware(fw, name, &pluto->pdev->dev); | 
|  | } | 
|  |  | 
|  | static struct tda1004x_config pluto2_fe_config __devinitdata = { | 
|  | .demod_address = I2C_ADDR_TDA10046 >> 1, | 
|  | .invert = 1, | 
|  | .invert_oclk = 0, | 
|  | .xtal_freq = TDA10046_XTAL_16M, | 
|  | .agc_config = TDA10046_AGC_DEFAULT, | 
|  | .if_freq = TDA10046_FREQ_3617, | 
|  | .pll_set = lg_tdtpe001p_pll_set, | 
|  | .pll_sleep = NULL, | 
|  | .request_firmware = pluto2_request_firmware, | 
|  | }; | 
|  |  | 
|  | static int __devinit frontend_init(struct pluto *pluto) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap); | 
|  | if (!pluto->fe) { | 
|  | dev_err(&pluto->pdev->dev, "could not attach frontend\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe); | 
|  | if (ret < 0) { | 
|  | if (pluto->fe->ops->release) | 
|  | pluto->fe->ops->release(pluto->fe); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __devinit pluto_read_rev(struct pluto *pluto) | 
|  | { | 
|  | u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR; | 
|  | dev_info(&pluto->pdev->dev, "board revision %d.%d\n", | 
|  | (val >> 12) & 0x0f, (val >> 4) & 0xff); | 
|  | } | 
|  |  | 
|  | static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac) | 
|  | { | 
|  | u32 val = pluto_readreg(pluto, REG_MMAC); | 
|  | mac[0] = (val >> 8) & 0xff; | 
|  | mac[1] = (val >> 0) & 0xff; | 
|  |  | 
|  | val = pluto_readreg(pluto, REG_IMAC); | 
|  | mac[2] = (val >> 8) & 0xff; | 
|  | mac[3] = (val >> 0) & 0xff; | 
|  |  | 
|  | val = pluto_readreg(pluto, REG_LMAC); | 
|  | mac[4] = (val >> 8) & 0xff; | 
|  | mac[5] = (val >> 0) & 0xff; | 
|  |  | 
|  | dev_info(&pluto->pdev->dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n", | 
|  | mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); | 
|  | } | 
|  |  | 
|  | static int __devinit pluto_read_serial(struct pluto *pluto) | 
|  | { | 
|  | struct pci_dev *pdev = pluto->pdev; | 
|  | unsigned int i, j; | 
|  | u8 __iomem *cis; | 
|  |  | 
|  | cis = pci_iomap(pdev, 1, 0); | 
|  | if (!cis) | 
|  | return -EIO; | 
|  |  | 
|  | dev_info(&pdev->dev, "S/N "); | 
|  |  | 
|  | for (i = 0xe0; i < 0x100; i += 4) { | 
|  | u32 val = readl(&cis[i]); | 
|  | for (j = 0; j < 32; j += 8) { | 
|  | if ((val & 0xff) == 0xff) | 
|  | goto out; | 
|  | printk("%c", val & 0xff); | 
|  | val >>= 8; | 
|  | } | 
|  | } | 
|  | out: | 
|  | printk("\n"); | 
|  | pci_iounmap(pdev, cis); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __devinit pluto2_probe(struct pci_dev *pdev, | 
|  | const struct pci_device_id *ent) | 
|  | { | 
|  | struct pluto *pluto; | 
|  | struct dvb_adapter *dvb_adapter; | 
|  | struct dvb_demux *dvbdemux; | 
|  | struct dmx_demux *dmx; | 
|  | int ret = -ENOMEM; | 
|  |  | 
|  | pluto = kzalloc(sizeof(struct pluto), GFP_KERNEL); | 
|  | if (!pluto) | 
|  | goto out; | 
|  |  | 
|  | pluto->pdev = pdev; | 
|  |  | 
|  | ret = pci_enable_device(pdev); | 
|  | if (ret < 0) | 
|  | goto err_kfree; | 
|  |  | 
|  | /* enable interrupts */ | 
|  | pci_write_config_dword(pdev, 0x6c, 0x8000); | 
|  |  | 
|  | ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); | 
|  | if (ret < 0) | 
|  | goto err_pci_disable_device; | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | ret = pci_request_regions(pdev, DRIVER_NAME); | 
|  | if (ret < 0) | 
|  | goto err_pci_disable_device; | 
|  |  | 
|  | pluto->io_mem = pci_iomap(pdev, 0, 0x40); | 
|  | if (!pluto->io_mem) { | 
|  | ret = -EIO; | 
|  | goto err_pci_release_regions; | 
|  | } | 
|  |  | 
|  | pci_set_drvdata(pdev, pluto); | 
|  |  | 
|  | ret = request_irq(pdev->irq, pluto_irq, SA_SHIRQ, DRIVER_NAME, pluto); | 
|  | if (ret < 0) | 
|  | goto err_pci_iounmap; | 
|  |  | 
|  | ret = pluto_hw_init(pluto); | 
|  | if (ret < 0) | 
|  | goto err_free_irq; | 
|  |  | 
|  | /* i2c */ | 
|  | i2c_set_adapdata(&pluto->i2c_adap, pluto); | 
|  | strcpy(pluto->i2c_adap.name, DRIVER_NAME); | 
|  | pluto->i2c_adap.owner = THIS_MODULE; | 
|  | pluto->i2c_adap.class = I2C_CLASS_TV_DIGITAL; | 
|  | pluto->i2c_adap.dev.parent = &pdev->dev; | 
|  | pluto->i2c_adap.algo_data = &pluto->i2c_bit; | 
|  | pluto->i2c_bit.data = pluto; | 
|  | pluto->i2c_bit.setsda = pluto_setsda; | 
|  | pluto->i2c_bit.setscl = pluto_setscl; | 
|  | pluto->i2c_bit.getsda = pluto_getsda; | 
|  | pluto->i2c_bit.getscl = pluto_getscl; | 
|  | pluto->i2c_bit.udelay = 10; | 
|  | pluto->i2c_bit.timeout = 10; | 
|  |  | 
|  | /* Raise SCL and SDA */ | 
|  | pluto_setsda(pluto, 1); | 
|  | pluto_setscl(pluto, 1); | 
|  |  | 
|  | ret = i2c_bit_add_bus(&pluto->i2c_adap); | 
|  | if (ret < 0) | 
|  | goto err_pluto_hw_exit; | 
|  |  | 
|  | /* dvb */ | 
|  | ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE); | 
|  | if (ret < 0) | 
|  | goto err_i2c_bit_del_bus; | 
|  |  | 
|  | dvb_adapter = &pluto->dvb_adapter; | 
|  |  | 
|  | pluto_read_rev(pluto); | 
|  | pluto_read_serial(pluto); | 
|  | pluto_read_mac(pluto, dvb_adapter->proposed_mac); | 
|  |  | 
|  | dvbdemux = &pluto->demux; | 
|  | dvbdemux->filternum = 256; | 
|  | dvbdemux->feednum = 256; | 
|  | dvbdemux->start_feed = pluto_start_feed; | 
|  | dvbdemux->stop_feed = pluto_stop_feed; | 
|  | dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | | 
|  | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); | 
|  | ret = dvb_dmx_init(dvbdemux); | 
|  | if (ret < 0) | 
|  | goto err_dvb_unregister_adapter; | 
|  |  | 
|  | dmx = &dvbdemux->dmx; | 
|  |  | 
|  | pluto->hw_frontend.source = DMX_FRONTEND_0; | 
|  | pluto->mem_frontend.source = DMX_MEMORY_FE; | 
|  | pluto->dmxdev.filternum = NHWFILTERS; | 
|  | pluto->dmxdev.demux = dmx; | 
|  |  | 
|  | ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter); | 
|  | if (ret < 0) | 
|  | goto err_dvb_dmx_release; | 
|  |  | 
|  | ret = dmx->add_frontend(dmx, &pluto->hw_frontend); | 
|  | if (ret < 0) | 
|  | goto err_dvb_dmxdev_release; | 
|  |  | 
|  | ret = dmx->add_frontend(dmx, &pluto->mem_frontend); | 
|  | if (ret < 0) | 
|  | goto err_remove_hw_frontend; | 
|  |  | 
|  | ret = dmx->connect_frontend(dmx, &pluto->hw_frontend); | 
|  | if (ret < 0) | 
|  | goto err_remove_mem_frontend; | 
|  |  | 
|  | ret = frontend_init(pluto); | 
|  | if (ret < 0) | 
|  | goto err_disconnect_frontend; | 
|  |  | 
|  | dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx); | 
|  | out: | 
|  | return ret; | 
|  |  | 
|  | err_disconnect_frontend: | 
|  | dmx->disconnect_frontend(dmx); | 
|  | err_remove_mem_frontend: | 
|  | dmx->remove_frontend(dmx, &pluto->mem_frontend); | 
|  | err_remove_hw_frontend: | 
|  | dmx->remove_frontend(dmx, &pluto->hw_frontend); | 
|  | err_dvb_dmxdev_release: | 
|  | dvb_dmxdev_release(&pluto->dmxdev); | 
|  | err_dvb_dmx_release: | 
|  | dvb_dmx_release(dvbdemux); | 
|  | err_dvb_unregister_adapter: | 
|  | dvb_unregister_adapter(dvb_adapter); | 
|  | err_i2c_bit_del_bus: | 
|  | i2c_bit_del_bus(&pluto->i2c_adap); | 
|  | err_pluto_hw_exit: | 
|  | pluto_hw_exit(pluto); | 
|  | err_free_irq: | 
|  | free_irq(pdev->irq, pluto); | 
|  | err_pci_iounmap: | 
|  | pci_iounmap(pdev, pluto->io_mem); | 
|  | err_pci_release_regions: | 
|  | pci_release_regions(pdev); | 
|  | err_pci_disable_device: | 
|  | pci_disable_device(pdev); | 
|  | err_kfree: | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | kfree(pluto); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | static void __devexit pluto2_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct pluto *pluto = pci_get_drvdata(pdev); | 
|  | struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter; | 
|  | struct dvb_demux *dvbdemux = &pluto->demux; | 
|  | struct dmx_demux *dmx = &dvbdemux->dmx; | 
|  |  | 
|  | dmx->close(dmx); | 
|  | dvb_net_release(&pluto->dvbnet); | 
|  | if (pluto->fe) | 
|  | dvb_unregister_frontend(pluto->fe); | 
|  |  | 
|  | dmx->disconnect_frontend(dmx); | 
|  | dmx->remove_frontend(dmx, &pluto->mem_frontend); | 
|  | dmx->remove_frontend(dmx, &pluto->hw_frontend); | 
|  | dvb_dmxdev_release(&pluto->dmxdev); | 
|  | dvb_dmx_release(dvbdemux); | 
|  | dvb_unregister_adapter(dvb_adapter); | 
|  | i2c_bit_del_bus(&pluto->i2c_adap); | 
|  | pluto_hw_exit(pluto); | 
|  | free_irq(pdev->irq, pluto); | 
|  | pci_iounmap(pdev, pluto->io_mem); | 
|  | pci_release_regions(pdev); | 
|  | pci_disable_device(pdev); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | kfree(pluto); | 
|  | } | 
|  |  | 
|  | #ifndef PCI_VENDOR_ID_SCM | 
|  | #define PCI_VENDOR_ID_SCM	0x0432 | 
|  | #endif | 
|  | #ifndef PCI_DEVICE_ID_PLUTO2 | 
|  | #define PCI_DEVICE_ID_PLUTO2	0x0001 | 
|  | #endif | 
|  |  | 
|  | static struct pci_device_id pluto2_id_table[] __devinitdata = { | 
|  | { | 
|  | .vendor = PCI_VENDOR_ID_SCM, | 
|  | .device = PCI_DEVICE_ID_PLUTO2, | 
|  | .subvendor = PCI_ANY_ID, | 
|  | .subdevice = PCI_ANY_ID, | 
|  | }, { | 
|  | /* empty */ | 
|  | }, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pci, pluto2_id_table); | 
|  |  | 
|  | static struct pci_driver pluto2_driver = { | 
|  | .name = DRIVER_NAME, | 
|  | .id_table = pluto2_id_table, | 
|  | .probe = pluto2_probe, | 
|  | .remove = __devexit_p(pluto2_remove), | 
|  | }; | 
|  |  | 
|  | static int __init pluto2_init(void) | 
|  | { | 
|  | return pci_register_driver(&pluto2_driver); | 
|  | } | 
|  |  | 
|  | static void __exit pluto2_exit(void) | 
|  | { | 
|  | pci_unregister_driver(&pluto2_driver); | 
|  | } | 
|  |  | 
|  | module_init(pluto2_init); | 
|  | module_exit(pluto2_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>"); | 
|  | MODULE_DESCRIPTION("Pluto2 driver"); | 
|  | MODULE_LICENSE("GPL"); |