|  | /* | 
|  | * For the TDA9875 chip | 
|  | * (The TDA9875 is used on the Diamond DTV2000 french version | 
|  | * Other cards probably use these chips as well.) | 
|  | * This driver will not complain if used with any | 
|  | * other i2c device with the same address. | 
|  | * | 
|  | * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source and | 
|  | * Eric Sandeen | 
|  | * This code is placed under the terms of the GNU General Public License | 
|  | * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) | 
|  | * Which was based on tda8425.c by Greg Alexander (c) 1998 | 
|  | * | 
|  | * OPTIONS: | 
|  | * debug   - set to 1 if you'd like to see debug messages | 
|  | * | 
|  | *  Revision: 0.1 - original version | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/videodev.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/i2c-algo-bit.h> | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include "bttv.h" | 
|  | #include <media/audiochip.h> | 
|  |  | 
|  | static int debug; /* insmod parameter */ | 
|  | module_param(debug, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  |  | 
|  | /* Addresses to scan */ | 
|  | static unsigned short normal_i2c[] =  { | 
|  | I2C_TDA9875 >> 1, | 
|  | I2C_CLIENT_END | 
|  | }; | 
|  | I2C_CLIENT_INSMOD; | 
|  |  | 
|  | /* This is a superset of the TDA9875 */ | 
|  | struct tda9875 { | 
|  | int mode; | 
|  | int rvol, lvol; | 
|  | int bass, treble; | 
|  | struct i2c_client c; | 
|  | }; | 
|  |  | 
|  | static struct i2c_driver driver; | 
|  | static struct i2c_client client_template; | 
|  |  | 
|  | #define dprintk  if (debug) printk | 
|  |  | 
|  | /* The TDA9875 is made by Philips Semiconductor | 
|  | * http://www.semiconductors.philips.com | 
|  | * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator | 
|  | * | 
|  | */ | 
|  |  | 
|  | /* subaddresses for TDA9875 */ | 
|  | #define TDA9875_MUT         0x12  /*General mute  (value --> 0b11001100*/ | 
|  | #define TDA9875_CFG         0x01  /* Config register (value --> 0b00000000 */ | 
|  | #define TDA9875_DACOS       0x13  /*DAC i/o select (ADC) 0b0000100*/ | 
|  | #define TDA9875_LOSR        0x16  /*Line output select regirter 0b0100 0001*/ | 
|  |  | 
|  | #define TDA9875_CH1V        0x0c  /*Channel 1 volume (mute)*/ | 
|  | #define TDA9875_CH2V        0x0d  /*Channel 2 volume (mute)*/ | 
|  | #define TDA9875_SC1         0x14  /*SCART 1 in (mono)*/ | 
|  | #define TDA9875_SC2         0x15  /*SCART 2 in (mono)*/ | 
|  |  | 
|  | #define TDA9875_ADCIS       0x17  /*ADC input select (mono) 0b0110 000*/ | 
|  | #define TDA9875_AER         0x19  /*Audio effect (AVL+Pseudo) 0b0000 0110*/ | 
|  | #define TDA9875_MCS         0x18  /*Main channel select (DAC) 0b0000100*/ | 
|  | #define TDA9875_MVL         0x1a  /* Main volume gauche */ | 
|  | #define TDA9875_MVR         0x1b  /* Main volume droite */ | 
|  | #define TDA9875_MBA         0x1d  /* Main Basse */ | 
|  | #define TDA9875_MTR         0x1e  /* Main treble */ | 
|  | #define TDA9875_ACS         0x1f  /* Auxilary channel select (FM) 0b0000000*/ | 
|  | #define TDA9875_AVL         0x20  /* Auxilary volume gauche */ | 
|  | #define TDA9875_AVR         0x21  /* Auxilary volume droite */ | 
|  | #define TDA9875_ABA         0x22  /* Auxilary Basse */ | 
|  | #define TDA9875_ATR         0x23  /* Auxilary treble */ | 
|  |  | 
|  | #define TDA9875_MSR         0x02  /* Monitor select register */ | 
|  | #define TDA9875_C1MSB       0x03  /* Carrier 1 (FM) frequency register MSB */ | 
|  | #define TDA9875_C1MIB       0x04  /* Carrier 1 (FM) frequency register (16-8]b */ | 
|  | #define TDA9875_C1LSB       0x05  /* Carrier 1 (FM) frequency register LSB */ | 
|  | #define TDA9875_C2MSB       0x06  /* Carrier 2 (nicam) frequency register MSB */ | 
|  | #define TDA9875_C2MIB       0x07  /* Carrier 2 (nicam) frequency register (16-8]b */ | 
|  | #define TDA9875_C2LSB       0x08  /* Carrier 2 (nicam) frequency register LSB */ | 
|  | #define TDA9875_DCR         0x09  /* Demodulateur configuration regirter*/ | 
|  | #define TDA9875_DEEM        0x0a  /* FM de-emphasis regirter*/ | 
|  | #define TDA9875_FMAT        0x0b  /* FM Matrix regirter*/ | 
|  |  | 
|  | /* values */ | 
|  | #define TDA9875_MUTE_ON	    0xff /* general mute */ | 
|  | #define TDA9875_MUTE_OFF    0xcc /* general no mute */ | 
|  |  | 
|  |  | 
|  |  | 
|  | /* Begin code */ | 
|  |  | 
|  | static int tda9875_write(struct i2c_client *client, int subaddr, unsigned char val) | 
|  | { | 
|  | unsigned char buffer[2]; | 
|  | dprintk("In tda9875_write\n"); | 
|  | dprintk("Writing %d 0x%x\n", subaddr, val); | 
|  | buffer[0] = subaddr; | 
|  | buffer[1] = val; | 
|  | if (2 != i2c_master_send(client,buffer,2)) { | 
|  | printk(KERN_WARNING "tda9875: I/O error, trying (write %d 0x%x)\n", | 
|  | subaddr, val); | 
|  | return -1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int i2c_read_register(struct i2c_adapter *adap, int addr, int reg) | 
|  | { | 
|  | unsigned char write[1]; | 
|  | unsigned char read[1]; | 
|  | struct i2c_msg msgs[2] = { | 
|  | { addr, 0,        1, write }, | 
|  | { addr, I2C_M_RD, 1, read  } | 
|  | }; | 
|  | write[0] = reg; | 
|  |  | 
|  | if (2 != i2c_transfer(adap,msgs,2)) { | 
|  | printk(KERN_WARNING "tda9875: I/O error (read2)\n"); | 
|  | return -1; | 
|  | } | 
|  | dprintk("tda9875: chip_read2: reg%d=0x%x\n",reg,read[0]); | 
|  | return read[0]; | 
|  | } | 
|  |  | 
|  | static void tda9875_set(struct i2c_client *client) | 
|  | { | 
|  | struct tda9875 *tda = i2c_get_clientdata(client); | 
|  | unsigned char a; | 
|  |  | 
|  | dprintk(KERN_DEBUG "tda9875_set(%04x,%04x,%04x,%04x)\n", | 
|  | tda->lvol,tda->rvol,tda->bass,tda->treble); | 
|  |  | 
|  |  | 
|  | a = tda->lvol & 0xff; | 
|  | tda9875_write(client, TDA9875_MVL, a); | 
|  | a =tda->rvol & 0xff; | 
|  | tda9875_write(client, TDA9875_MVR, a); | 
|  | a =tda->bass & 0xff; | 
|  | tda9875_write(client, TDA9875_MBA, a); | 
|  | a =tda->treble  & 0xff; | 
|  | tda9875_write(client, TDA9875_MTR, a); | 
|  | } | 
|  |  | 
|  | static void do_tda9875_init(struct i2c_client *client) | 
|  | { | 
|  | struct tda9875 *t = i2c_get_clientdata(client); | 
|  | dprintk("In tda9875_init\n"); | 
|  | tda9875_write(client, TDA9875_CFG, 0xd0 ); /*reg de config 0 (reset)*/ | 
|  | tda9875_write(client, TDA9875_MSR, 0x03 );    /* Monitor 0b00000XXX*/ | 
|  | tda9875_write(client, TDA9875_C1MSB, 0x00 );  /*Car1(FM) MSB XMHz*/ | 
|  | tda9875_write(client, TDA9875_C1MIB, 0x00 );  /*Car1(FM) MIB XMHz*/ | 
|  | tda9875_write(client, TDA9875_C1LSB, 0x00 );  /*Car1(FM) LSB XMHz*/ | 
|  | tda9875_write(client, TDA9875_C2MSB, 0x00 );  /*Car2(NICAM) MSB XMHz*/ | 
|  | tda9875_write(client, TDA9875_C2MIB, 0x00 );  /*Car2(NICAM) MIB XMHz*/ | 
|  | tda9875_write(client, TDA9875_C2LSB, 0x00 );  /*Car2(NICAM) LSB XMHz*/ | 
|  | tda9875_write(client, TDA9875_DCR, 0x00 );    /*Demod config 0x00*/ | 
|  | tda9875_write(client, TDA9875_DEEM, 0x44 );   /*DE-Emph 0b0100 0100*/ | 
|  | tda9875_write(client, TDA9875_FMAT, 0x00 );   /*FM Matrix reg 0x00*/ | 
|  | tda9875_write(client, TDA9875_SC1, 0x00 );    /* SCART 1 (SC1)*/ | 
|  | tda9875_write(client, TDA9875_SC2, 0x01 );    /* SCART 2 (sc2)*/ | 
|  |  | 
|  | tda9875_write(client, TDA9875_CH1V, 0x10 );  /* Channel volume 1 mute*/ | 
|  | tda9875_write(client, TDA9875_CH2V, 0x10 );  /* Channel volume 2 mute */ | 
|  | tda9875_write(client, TDA9875_DACOS, 0x02 ); /* sig DAC i/o(in:nicam)*/ | 
|  | tda9875_write(client, TDA9875_ADCIS, 0x6f ); /* sig ADC input(in:mono)*/ | 
|  | tda9875_write(client, TDA9875_LOSR, 0x00 );  /* line out (in:mono)*/ | 
|  | tda9875_write(client, TDA9875_AER, 0x00 );   /*06 Effect (AVL+PSEUDO) */ | 
|  | tda9875_write(client, TDA9875_MCS, 0x44 );   /* Main ch select (DAC) */ | 
|  | tda9875_write(client, TDA9875_MVL, 0x03 );   /* Vol Main left 10dB */ | 
|  | tda9875_write(client, TDA9875_MVR, 0x03 );   /* Vol Main right 10dB*/ | 
|  | tda9875_write(client, TDA9875_MBA, 0x00 );   /* Main Bass Main 0dB*/ | 
|  | tda9875_write(client, TDA9875_MTR, 0x00 );   /* Main Treble Main 0dB*/ | 
|  | tda9875_write(client, TDA9875_ACS, 0x44 );   /* Aux chan select (dac)*/ | 
|  | tda9875_write(client, TDA9875_AVL, 0x00 );   /* Vol Aux left 0dB*/ | 
|  | tda9875_write(client, TDA9875_AVR, 0x00 );   /* Vol Aux right 0dB*/ | 
|  | tda9875_write(client, TDA9875_ABA, 0x00 );   /* Aux Bass Main 0dB*/ | 
|  | tda9875_write(client, TDA9875_ATR, 0x00 );   /* Aux Aigus Main 0dB*/ | 
|  |  | 
|  | tda9875_write(client, TDA9875_MUT, 0xcc );   /* General mute  */ | 
|  |  | 
|  | t->mode=AUDIO_UNMUTE; | 
|  | t->lvol=t->rvol =0;  	/* 0dB */ | 
|  | t->bass=0; 			/* 0dB */ | 
|  | t->treble=0;  		/* 0dB */ | 
|  | tda9875_set(client); | 
|  |  | 
|  | } | 
|  |  | 
|  |  | 
|  | /* *********************** * | 
|  | * i2c interface functions * | 
|  | * *********************** */ | 
|  |  | 
|  | static int tda9875_checkit(struct i2c_adapter *adap, int addr) | 
|  | { | 
|  | int dic,rev; | 
|  |  | 
|  | dic=i2c_read_register(adap,addr,254); | 
|  | rev=i2c_read_register(adap,addr,255); | 
|  |  | 
|  | if(dic==0 || dic==2) { // tda9875 and tda9875A | 
|  | printk("tda9875: TDA9875%s Rev.%d detected at 0x%x\n", | 
|  | dic==0?"":"A", rev,addr<<1); | 
|  | return 1; | 
|  | } | 
|  | printk("tda9875: no such chip at 0x%x (dic=0x%x rev=0x%x)\n",addr<<1,dic,rev); | 
|  | return(0); | 
|  | } | 
|  |  | 
|  | static int tda9875_attach(struct i2c_adapter *adap, int addr, int kind) | 
|  | { | 
|  | struct tda9875 *t; | 
|  | struct i2c_client *client; | 
|  | dprintk("In tda9875_attach\n"); | 
|  |  | 
|  | t = kzalloc(sizeof *t,GFP_KERNEL); | 
|  | if (!t) | 
|  | return -ENOMEM; | 
|  |  | 
|  | client = &t->c; | 
|  | memcpy(client,&client_template,sizeof(struct i2c_client)); | 
|  | client->adapter = adap; | 
|  | client->addr = addr; | 
|  | i2c_set_clientdata(client, t); | 
|  |  | 
|  | if(!tda9875_checkit(adap,addr)) { | 
|  | kfree(t); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | do_tda9875_init(client); | 
|  | printk(KERN_INFO "tda9875: init\n"); | 
|  |  | 
|  | i2c_attach_client(client); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda9875_probe(struct i2c_adapter *adap) | 
|  | { | 
|  | if (adap->class & I2C_CLASS_TV_ANALOG) | 
|  | return i2c_probe(adap, &addr_data, tda9875_attach); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda9875_detach(struct i2c_client *client) | 
|  | { | 
|  | struct tda9875 *t  = i2c_get_clientdata(client); | 
|  |  | 
|  | do_tda9875_init(client); | 
|  | i2c_detach_client(client); | 
|  |  | 
|  | kfree(t); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda9875_command(struct i2c_client *client, | 
|  | unsigned int cmd, void *arg) | 
|  | { | 
|  | struct tda9875 *t = i2c_get_clientdata(client); | 
|  |  | 
|  | dprintk("In tda9875_command...\n"); | 
|  |  | 
|  | switch (cmd) { | 
|  | /* --- v4l ioctls --- */ | 
|  | /* take care: bttv does userspace copying, we'll get a | 
|  | kernel pointer here... */ | 
|  | case VIDIOCGAUDIO: | 
|  | { | 
|  | struct video_audio *va = arg; | 
|  | int left,right; | 
|  |  | 
|  | dprintk("VIDIOCGAUDIO\n"); | 
|  |  | 
|  | va->flags |= VIDEO_AUDIO_VOLUME | | 
|  | VIDEO_AUDIO_BASS | | 
|  | VIDEO_AUDIO_TREBLE; | 
|  |  | 
|  | /* min is -84 max is 24 */ | 
|  | left = (t->lvol+84)*606; | 
|  | right = (t->rvol+84)*606; | 
|  | va->volume=max(left,right); | 
|  | va->balance=(32768*min(left,right))/ | 
|  | (va->volume ? va->volume : 1); | 
|  | va->balance=(left<right)? | 
|  | (65535-va->balance) : va->balance; | 
|  | va->bass = (t->bass+12)*2427;    /* min -12 max +15 */ | 
|  | va->treble = (t->treble+12)*2730;/* min -12 max +12 */ | 
|  | va->mode |= VIDEO_SOUND_MONO; | 
|  |  | 
|  | break; /* VIDIOCGAUDIO case */ | 
|  | } | 
|  |  | 
|  | case VIDIOCSAUDIO: | 
|  | { | 
|  | struct video_audio *va = arg; | 
|  | int left,right; | 
|  |  | 
|  | dprintk("VIDEOCSAUDIO...\n"); | 
|  | left = (min(65536 - va->balance,32768) * | 
|  | va->volume) / 32768; | 
|  | right = (min(va->balance,(__u16)32768) * | 
|  | va->volume) / 32768; | 
|  | t->lvol = ((left/606)-84) & 0xff; | 
|  | if (t->lvol > 24) | 
|  | t->lvol = 24; | 
|  | if (t->lvol < -84) | 
|  | t->lvol = -84 & 0xff; | 
|  |  | 
|  | t->rvol = ((right/606)-84) & 0xff; | 
|  | if (t->rvol > 24) | 
|  | t->rvol = 24; | 
|  | if (t->rvol < -84) | 
|  | t->rvol = -84 & 0xff; | 
|  |  | 
|  | t->bass = ((va->bass/2400)-12) & 0xff; | 
|  | if (t->bass > 15) | 
|  | t->bass = 15; | 
|  | if (t->bass < -12) | 
|  | t->bass = -12 & 0xff; | 
|  |  | 
|  | t->treble = ((va->treble/2700)-12) & 0xff; | 
|  | if (t->treble > 12) | 
|  | t->treble = 12; | 
|  | if (t->treble < -12) | 
|  | t->treble = -12 & 0xff; | 
|  |  | 
|  |  | 
|  |  | 
|  | //printk("tda9875 bal:%04x vol:%04x bass:%04x treble:%04x\n",va->balance,va->volume,va->bass,va->treble); | 
|  |  | 
|  |  | 
|  | tda9875_set(client); | 
|  |  | 
|  | break; | 
|  |  | 
|  | } /* end of VIDEOCSAUDIO case */ | 
|  |  | 
|  | default: /* Not VIDEOCGAUDIO or VIDEOCSAUDIO */ | 
|  |  | 
|  | /* nothing */ | 
|  | dprintk("Default\n"); | 
|  |  | 
|  | } /* end of (cmd) switch */ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct i2c_driver driver = { | 
|  | .driver = { | 
|  | .name   = "tda9875", | 
|  | }, | 
|  | .id             = I2C_DRIVERID_TDA9875, | 
|  | .attach_adapter = tda9875_probe, | 
|  | .detach_client  = tda9875_detach, | 
|  | .command        = tda9875_command, | 
|  | }; | 
|  |  | 
|  | static struct i2c_client client_template = | 
|  | { | 
|  | .name      = "tda9875", | 
|  | .driver    = &driver, | 
|  | }; | 
|  |  | 
|  | static int __init tda9875_init(void) | 
|  | { | 
|  | return i2c_add_driver(&driver); | 
|  | } | 
|  |  | 
|  | static void __exit tda9875_fini(void) | 
|  | { | 
|  | i2c_del_driver(&driver); | 
|  | } | 
|  |  | 
|  | module_init(tda9875_init); | 
|  | module_exit(tda9875_fini); | 
|  |  | 
|  | /* | 
|  | * Local variables: | 
|  | * c-basic-offset: 8 | 
|  | * End: | 
|  | */ | 
|  |  |